Philips TY5080/00 User Manual
Displayed below is the user manual for TY5080/00 by Philips which is a product in the Air Purifiers category. This manual has pages.
Related Manuals
TY5080
Always there to help you
始终如一地为您提供帮助
有 疑 问？
请联系飞利浦
Read this user manual carefully before you
use the appliance.
Save it for future reference.
使用产品前请仔细阅读本使用说明书
保留备用
EN User manual 3 ZHS 用户手册 23
3
EN
Contents
1 Important 4
Safety 4
2 Yourairpurier 6
Product Overview 6
Controls overview 7
3 Getting started 8
Install lters 8
4 Using the appliance 10
Understand the air quality light 10
Switch on 10
Change the fan speed 11
5 Cleaning 13
Cleaning schedule 13
Clean the body of the appliance 13
Clean the air outlet cover 13
Clean the air quality sensor 14
Clean the pre-lter 15
6 Replacingtheairpuricationlter16
Understand the healthy air protect
lock 16
Replace the air purication lter 16
7 Resettingthelterlifetime
counter 17
8 Troubleshooting 18
9 Guarantee and service 20
Order parts or accessories 20
10 Notices 20
Electromagnetic elds (EMF) 20
Recycling 20
4
EN
1 Important
Safety
Read this user manual carefully before you
use the appliance, and save it for future
reference.
Danger
• Do not let water or any other liquid
or ammable detergent enter the
appliance to avoid electric shock and/or
a re hazard.
• Do not clean the appliance with water,
any other liquid, or a (ammable)
detergent to avoid electric shock and/
or a re hazard.
• Do not spray any ammable materials
such as insecticides or fragrance around
the appliance.
Warning
• Check if the voltage indicated on the
appliance corresponds to the local
power voltage before you connect the
appliance.
• If the power cord is damaged, you must
have it replaced by Philips, a service
center authorized by Philips, or similarly
qualied persons in order to avoid a
hazard.
• Do not use the appliance if the plug,
the power cord, or the appliance itself
is damaged.
• This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved. Child shall not play with the
appliance. Cleaning and maintenance
shall not be made by children without
supervision.
• Do not block the air inlet and outlet,
e.g. by placing items on the air outlet or
in front of the air inlet.
• Make sure that foreign objects do not
fall into the appliance through the air
outlet.
Caution
• This appliance is not a substitute for
proper ventilation or regular vacuum
cleaning.
• If the power socket used to power the
appliance has poor connections, the
plug of the appliance becomes hot.
Make sure that you plug the appliance
into a properly connected power
socket.
• Always place and use the appliance
on a dry, stable, level, and horizontal
surface.
• Leave at least 20cm free space behind
and on both sides of the appliance and
leave at least 30cm free space above
the appliance.
• Do not place anything on top of the
appliance.
• Do not sit or stand on the appliance.
The appliance is equipped with omni
wheels. Sitting or standing on the
appliance may lead to potential injuiry.
• Do not place the appliance directly
below an air conditioner to prevent
condensation from dripping onto the
appliance.
• Make sure all lters are properly
installed before you switch on the
appliance.
5
EN
• Only use the original Philips lters
specially intended for this appliance.
Do not use any other lters.
• Avoid knocking against the appliance
(the air inlet and outlet in particular)
with hard objects.
• Always lift or move the appliance
by both handles at the sides of the
appliance.
• Do not insert your ngers or
objects into the air outlet or the air
inlet to prevent physical injury or
malfunctioning of the appliance.
• Do not use this appliance when
you have used indoor smoke-type
insect repellents or in places with oily
residues, burning incense, or chemical
fumes.
• Do not use the appliance near gas
appliances, heating devices or replaces.
• Always unplug the appliance after use
and before cleaning or carrying out
other maintenance.
• Do not use the appliance in a room
with major temperature changes, as
this may cause condensation inside the
appliance.
• To prevent interference, place the
appliance at least 2m away from
electrical appliances that use airborne
radio waves such as TVs, radios, and
radio-controlled clocks.
• This appliance is only intended to be
used indoor under normal operating
conditions.
• Do not use the appliance in wet
surroundings or in surroundings with
high ambient temperatures.
• The appliance does not remove carbon
monoxide (CO) or radon (Rn). It
cannot be used as a safety device in
case of accidents with combustion
processes and hazardous chemicals.
• If you need to move the appliance,
disconnect the appliance from the
power supply rst. The appliance is
equipped with omni wheels and is easy
to move.
• When moving the appliance, do it
slowly and do not push it rapidly.
• Do not move the appliance by pulling
its power cord.
6
EN
2 Your air purifier
Read this user manual carefully before you use the appliance, and save it for future reference.
Product Overview
Air outlet cover
Speed knob
Filter 2: Integrated Filter
for Tai series
Filter 1: Pre-lter
Side panels
Air outlet cover knob
Air quality sensor
Type number Filter
TY5089 Integrated Filter for Tai series*
*Hereinafter referred to as "air purication lter".
7
EN
Controls overview
: On/Off button : Turbo speed
: Silent speed : Pre-lter cleaning alert
: Speed 1 : Air purication lter replacement alert
: Speed 2 : Air quality light button
: Speed 3 : Auto button
8
EN
3 Getting started
Installlters
Remove the packaging of the lters
before using the appliance. Unpack them
and place them back into the appliance
described as follows:
Note
• There is one set of lters on each
side of the appliance. Each side is
equipped with one pre-lter and one air
purication lter.
• Insert the lters in the correct position.
• Make sure that you place the air
purication lter in the appliance rst
and then the pre-lter.
• Make sure that the side with the tag is
pointing towards you.
1 Unlock the side panel from the
appliance, and then gently pull the
bottom of the side panel towards you.
2 To take out the pre-lter, press the
two clips down and pull the lter
towards you.
3 Take out the air purication lter from
the appliance.
4 Remove the packaging materials of the
air purication lter.
9
EN
5 Put the unpacked air purication lter
back into the appliance.
6 Put the pre-lter back into the
appliance.
Note
• Make sure that the side with the two
clips is pointing towards you, and that
all hooks of the pre-lter are properly
attached to the purier.
7 To reattach the side panel, mount
the panel onto the bottom of the
appliance rst (1). Then, gently push
the panel against the body of the
appliance (2).
8 Repeat all steps for the other side of
the appliance.
10
EN
4 Using the appliance
Understand the air quality
light
Color of the air quality
light
Air quality level
Blue Good
Dark purple Fair
Pink Unhealthy
Red Very unhealthy
The air quality light automatically goes on
when the appliance is switched on, and
lights up all colors in sequence. In a short
while the air quality sensor selects the
color that corresponds to the ambient air
quality.
Note
•The built-in air quality sensor measures
the air quality and automatically selects
the appropriate color of the air quality
light. When the air is clean, the color of
the air quality light is in blue. When the
air quality deteriorates, the color of the
air quality light changes to dark purple,
purple or red.
Switch on
1 Put the plug of the appliance into the
wall socket.
»The appliance beeps.
»All lights go on once and then go
out again.
2 Press to switch on the appliance.
»After measuring the air quality
for a short time, the air quality
sensor automatically selects
the appropriate color of the air
quality light.
»The default fan speed is
(AUTO).
3 Press again to switch off the
appliance.
11
EN
Change the fan speed
(AUTO)
In auto mode, the appliance selects the
appropriate fan speed in accordance with
the ambient air quality.
1 Press to select the auto mode.
» and one of the fan speed
indicators light up.
2 Press again to deactivate the auto
mode.
»The appliance operates in manual
mode.
Note
•You can also turn the speed knob and
select another fan speed to switch from
auto mode to manual mode.
Manual
You can mannually select the fan speed
you need.
1 Turn the speed knob to select the fan
speed:
(Speed 1)
(Speed 2)
(Speed 3)
(Silent speed)
(Turbo speed)
Tip
•If the air quality light lights up blue, the
air quality is good, and you can select a
lower fan speed. On the other hand, if
the air quality light lights up pink or red,
the air quality is unhealthy, and you can
select a higher fan speed to purify the
air more quickly.
12
EN
Fan speed light Sensitivity level
Extra sensitive
Sensitive
Standard
2 Turn the speed knob to adjust the
sensitivity level of the air quality sensor.
3 When the desired sensitivity level is
selected, press and hold and for
3 seconds again to save the setting.
Note
•When you are changing the sensitivity
level, if you do not change any setting
within 10 seconds, or do not press and
hold and for 3 seconds after
you have changed the sensitivity level,
the appliance will resume normal work
without saving any changes.
•After the sensitivity level is changed
and saved, the appliance operates at
the latest setting of the sensitivity level
whenever you switch on the appliance.
Set the sensitivity of the air
quality sensor
This appliance allows you to adjust the
sensitivity of the air quality sensor. There
are three sensitivity levels:
• Extra sensitive (default setting)
• Sensitive
• Standard
You can adjust the sensitivity of the air
quality sensor in the following way:
Note
• At higher sensitivity level, the purier
is more sensitive to air pollutants.
When the purier is in auto mode, it
is more likely to choose a higher fan
speed. The air quality sensor selects the
appropriate color of the air quality light
in accordance with the higher sensitivity.
1 Unplug the appliance rst, plug it in
again and switch it on. Within 5 to 30
seconds from the appliance is switched
on, press and hold and for 3
seconds.
»The corresponding fan speed
light ashes to show the current
sensitivity level of the air quality
sensor.
3秒
3S
13
EN
5 Cleaning
Note
•Always unplug the appliance before you
clean it.
•Never immerse the appliance in water
or any other liquid.
•Never use abrasive, aggressive, or
ammable cleaning agents such as
bleach or alcohol to clean any part of
the appliance.
• Only the pre-lter is washable. The
air purier lter is not washable nor
vacuum cleanable.
Cleaning schedule
Frequency Cleaning method
When necessary Wipe the surface of
the appliance with a
soft dry cloth.
Clean the air outlet
cover
Every two
months
Clean the air quality
sensor with a dry
cotton swab.
When the lter
cleaning indicator
lights up
Clean the pre-lter.
When the lter
replacement
indicator
starts ashing
Replace the air
purication lter.
Clean the body of the
appliance
Regularly clean the inside and outside
of the appliance to prevent dusts from
collecting.
1 Wipe away dust with a soft dry cloth
from the body of the appliance.
2 Clean the air inlet and the air outlet
with a soft dry cloth.
Clean the air outlet cover
1 To unlock the air outlet cover, turn the
cover knob clockwise, and pull up the
cover to remove.
2 Clean the cover with a brush.
14
EN
3 To reattach the cover, mount it onto
the top of the appliance rst, and then
turn the cover knob anti-clockwise to
lock the cover.
Clean the air quality sensor
Clean the air quality sensor every two
months for optimal functioning of the
appliance. Clean it more frequently if you
use the appliance in a dusty environment.
1 Clean the inlet and outlet of the air
quality sensor with a soft brush.
2 Open the cover of the air quality
sensor.
3 Clean the sensor, the dust inlet and
outlet with a lightly moistened cotton
swab, and nish with a dry cotton
swab.
4 Close the sensor cover.
15
EN
Cleanthepre-lter
Filter alert light status Follow this
lights up.
Clean the pre-lter
Note
• Filter light
lights up approximately once a
month.
1 Call the Philips Consumer Care
Center (4009200180) immediately to
clean the pre-lter.
16
EN
6 Replacingtheair
purification filter
Understand the healthy air
protect lock
This appliance is equipped with the healthy
air protect lock to make sure that the
lters are in optimal condition when the
appliance is operating. When the lter is
almost full and has to be replaced, the air
purication lter replacement light ( )
starts to ash.
When you do not replace the lter in time:
»The air purication lter
replacement light ( ) remains
on.
»The appliance stops operating
and is locked. Call the Philips
Consumer Care Center
(4009200180) immediately to
replace the lter.
Replacetheairpurication
lter
Filter alert light
status
Follow this
lights up. Replace the air
purication lter.
Note
•The air purication lter is not washable
nor vacuum cleanable.
1 Take out the pre-lters on both sides
of the appliance.
2 Take out the air purication lter on
both sides of the appliance using the
tag on the lter and gently put them
into the trash bin.
17
EN
Note
• Do not touch the pleated lter surface,
or smell the lter as it has collected
pollutants from the air.
•Wash your hands after disposing of the
used lters.
3 Remove all packaging material of the
new lters.
4 Put the new lters into the appliance
on both sides.
5 After the pre-lters are properly put
back in the appliance, reset the lter
lifetime counter. (Refer to chapter 7
"Resetting the lter lifetime counter".)
7 Resetting the filter
lifetime counter
When you replace the lters, it is
important that you also reset the lter
lifetime counter afterwards. This allows
the appliance to be in sync with the lter
lifetime.
1 Press and hold for 3 seconds.
»The lter light goes out, and
the appliance resumes working
automatically.
3秒
3S
18
EN
8 Troubleshooting
This chapter summarizes the most common problems you could encounter with the
appliance. If you are unable to solve the problem with the information below, contact the
Consumer Care Center in your country.
Problem Possible solution
The appliance does
not work even
though it is plugged
in.
•The lter replacement light has been on continuously but you did
not replace the corresponding lter, it is now locked. In this case,
replace the lter and reset the lter time.
No air comes out of
the air outlet.
Put the plug of the appliance into the power socket and switch on.
The airow that
comes out of the air
outlet is signicantly
weaker than before.
•The pre-lter is dirty. Clean the pre-lter (see the chapter
"Cleaning").
•Make sure that you have removed all packaging material from the
lters.
The air quality does
not improve, even
though the appliance
has been operating
for a long time.
•One of the lters has not been placed in the appliance. Make
sure that all lters are properly installed in the following order,
starting with the innermost lter: 1) air purication lter; 2) pre-
lter.
•The air quality sensor is wet. The humidity level in your room
is high and causes condensation. Make sure that the air quality
sensor is clean and dry (see the chapter "Cleaning").
The color of the air
quality light always
stays the same.
The air quality sensor is dirty. Clean the air quality sensor (see the
chapter "Cleaning").
The appliance
produces a strange
smell.
The rst few times you use the appliance, it may produce a plastic
smell. This is normal. However, if the appliance produces a burnt
smell, contact your Philips dealer or an authorized Philips service
centre. The appliance may also produce an unpleasant smell when
one of the lters is dirty. In this case, clean or replace the lter
concerned.
19
EN
Problem Possible solution
I need cleaner air
because I have an
allergy.
You can change the air quality sensor sensitivity (see the chapter
"Use the appliance, section "Set the sensitivity of the air quality
sensor") to make the appliance clean the air even better.
The appliance is
extra loud.
•Please check if you have removed all the packaging material from
the lters.
•If the appliance is still too loud, you can change the fan speed to a
lower fan speed level.
The appliance still
indicates that I need
to replace a lter, but
I already did.
Perhaps you did not reset the lter lifetime counter. Switch on the
appliance. Then press and hold for 3 seconds.
20
EN
9 Guarantee and
service
If you need information or if you have
a question, please contact the Philips
Consumer Care Center in your country
(4009200180). If there is no Consumer
Care Center in your country, go to your
local Philips dealer.
Order parts or accessories
If you have to replace a part or want to
purchase an additional part, please contact
the Philips Consumer Care Center in your
country (4009200180).
10 Notices
Electromagneticelds(EMF)
This Philips appliance complies with all
applicable standards and regulations
regarding exposure to electromagnetic
elds.
Compliance with EMF
Koninklijke Philips N.V. manufactures and
sells many products targeted at consumers,
which, like any electronic apparatus, in
general have the ability to emit and receive
electromagnetic signals.
One of Philips' leading Business Principles
is to take all necessary health and safety
measures for our products, to comply with
all applicable legal requirements and to stay
well within the EMF standards applicable at
the time of producing the products.
Philips is committed to develop, produce
and market products that cause no
adverse health effects. Philips conrms
that if its products are handled properly
for their intended use, they are safe to use
according to scientic evidence available
today.
Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments in
standardization for early integration in its
products.
Recycling
Do not throw away the product with the
normal household waste at the end of its
life, but hand it in at an ofcial collection
point for recycling. By doing this, you help
to preserve the environment.
23
简体中文
目录
1 重要事项 24
安全 24
2 您的空气净化器 26
产品概览 26
控制面板概览 27
3 使用入门 28
安装过滤网 28
4 使用产品 30
了解空气质量指示灯 30
打开 30
更改风速 31
5 清洁 33
清洁计划 33
清洁产品机身 33
清洁出风口盖 33
清洁空气质量传感器 34
清洁预过滤网 35
6 更换空气净化过滤网 36
了解健康空气智能锁 36
更换空气净化过滤网 36
7 重置滤网使用寿命计数器 37
8 故障排除 38
9 保修与服务 39
订购部件或附件 39
10 注意事项 39
电磁场 (EMF) 39
回收 39
24
简体中文
1 重要事项
安全
使用产品前请仔细阅读本使用说
明书，并妥善保管以备日后参考。
危险
• 切勿让水或任何其它液体或易
燃性清洁剂进入产品，以免发
生触电和 /或火灾。
• 切勿用水或任何其它液体或（易
燃性）清洁剂来清洁产品，以
免发生触电和 /或火灾。
• 切勿在产品周围喷洒杀虫剂或
香水等任何可燃材料。
警告
• 在将产品连接电源之前，请先
检查产品所标电压与当地的供
电电压是否相符。
• 如果电源软线损坏，为了避免
危险，必须由制造商、其维修
部或类似部门的专业人员更换。
• 如果插头、电源线或产品本身
受损，请勿再使用本产品。
• 器具不打算由有肢体、感官或
精神能力缺陷或缺少使用经验
和知识的人（包括儿童）使用，
除非有负责他们安全的人对他
们进行与器具使用有关的监督
或指导。应照看好儿童，确保
他们不玩耍本器具。
• 请勿堵塞进风和出风口，例如
不要将物体放置在出风口上或
进风口前方。
• 确保异物不会从出风口掉入机
器内部。
警告
• 本产品不能替代正常通风，
日常吸尘的电器设备。
• 如果连接产品的电源插座接触
不良，则产品的插头可能会变
得很热。确保所连接的电源插
座接触良好。
• 一定要在干燥、稳固、平整且
水平的表面上放置和使用本产
品。
• 产品的后侧及两侧均要留出至
少 20 厘米的空间，产品上方
至少要留出 30 厘米的空间。
• 切勿在本产品上放置任何物品。
• 请勿坐在或站在产品上面。产
品配有全向轮。坐在或站在产
品上面可能导致潜在的人身伤
害。
• 切勿将产品直接放在空调下方，
以防冷凝水滴到产品中。
• 打开产品电源之前，务必确保
已经正确安装所有过滤网。
• 只能使用飞利浦专门为本产品
设计的原装过滤网。切勿使用
任何其它过滤网。
• 请勿用硬物敲击本产品（尤其
是进风口和出风口）。
25
简体中文
• 请务必通过产品两端的手柄提
起或移动产品。
• 请勿将手指或物体插入出风口
或进风口，以防止产品出现物
理损坏或发生故障。
• 当您使用室内喷雾式驱虫剂或
在充满油污、易燃气体或化学
烟雾的地方时，请勿使用本产品。
• 请勿在气体用具、加热装置或
火炉附近使用本产品。
• 使用之后和清洁产品或执行其
他维护之前，务必将电源插头
拔掉。
• 请勿在温度变化较大的房间内
使用本产品，因为这可能导致
产品内部的冷凝。
• 为防止产生干扰，产品与使用
无线电波的电器（例如电视机、
收音机和无线电控制时钟）之
间至少应保持 2 米距离。
• 本产品仅限于室内使用并在正
常运行条件下使用。
• 请勿在潮湿环境或高温环境中
使用本产品。
• 本产品不能去除一氧化碳
(CO) 或氡 (Rn)，因此在发生
燃烧和危险化学品事故时，不
能作为安全设备使用。
• 如果需要移动产品，请先断开
产品的电源。产品配有全向轮，
便于移动。
• 移动产品时，务必缓慢，不要
快速推动。
• 请勿通过拉扯电源线来移动产
品。
26
简体中文
2 您的空气净化器
使用本产品之前，请仔细阅读本用户手册，并妥善保管以备日后参考。
产品概览
出风口盖
风速旋钮
滤网 2 ：泰系列专用
复合滤网
滤网 1 ：预过滤网
侧面板
空气质量传感器
开盖旋钮
滤网型号 滤网名称
TY5089 泰系列专用复合滤网 *
* 以下统称“空气净化过滤网”。
27
简体中文
控制面板概览
：开关按钮 ：强力风速
：静音风速 ：清洁预过滤网指示灯
：一档风速 ：更换空气净化过滤网指示灯
：二档风速 ：空气质量指示灯按钮
：三档风速 ：自动模式按钮
28
简体中文
3 使用入门
安装过滤网
使用产品之前，务必先除去过滤网的包
装。请按以下所述拆掉滤网的包装，然
后将其重新放回产品中。
注意
•产品的两侧各有一组滤网。每侧均
配备一个预过滤网和一个空气净化
过滤网。
•将过滤网插到正确位置。
•确保先将空气净化过滤网放入产品，
然后再放入预过滤网。
•确保带拉片的一面朝向您。
1 将手指放在侧面板上方凹槽处并将
其朝外拉，然后将侧面板从产品上
取出。
2 要取出预过滤网，请向下按两个固
定夹，然后朝自己的方向拉动滤网。
3 从产品中取出空气净化过滤网。
4 拆掉空气净化过滤网的包装材料。
5 将已拆去包装的空气净化过滤网放
入产品。
29
简体中文
6 将预过滤网放回产品内部。
注意
•确保带两个固定夹的一面朝向您，
并确保预过滤网的所有挂钩均已正
确连接到净化器上。
7 要重新安装侧面板，请先将面板安
装到产品的底部 (1)。然后，朝产
品机身方向轻推面板 (2)。
8 在产品的另一侧重复执行所有步骤。
30
简体中文
4 使用产品
了解空气质量指示灯
空气质量指示灯的颜色 空气质量级别
蓝色 良好
深紫色 一般
粉红色 不健康
红色 非常不健康
产品打开后，空气质量指示灯会自动亮
起，并按顺序亮起所有颜色。片刻后，
空气质量传感器会选择与环境空气质量
相对应的颜色。
注意
•内置空气质量传感器能够测量空气
质量并自动选择空气质量指示灯的
适当颜色。当空气清洁时，空气质
量指示灯的颜色为蓝色。当空气质
量恶化时，空气质量指示灯的颜色
将变为深紫色、紫色或红色。
打开
1 将产品插头插入电源插座。
»产品发出蜂鸣音。
»所有指示灯均亮起一次，然后
再熄灭。
2 按 打开产品。
»测量空气质量片刻后，空气质
量传感器会自动选择空气质量
指示灯的适当颜色。
»默认风速为
（自动）。
3 再次按 可关闭产品。
31
简体中文
更改风速
（自动）
在自动模式下，产品会按照环境空气质
量选择相应的风速。
1 按 可选择自动模式。
» 指示灯与其中一个风速指示
灯会亮起。
2 再次按 可关闭自动模式。
»产品会以手动模式运行。
注意
•您也可以转动速度旋钮，选择其他
风速以从自动模式切换至手动模式。
手动
您可以手动选择所需的风速。
1 转动速度旋钮可选择以下风速 ：
（一档风速）
（二档风速）
（三档风速）
（静音风速）
（强力风速）
提示
•如果空气质量指示灯呈蓝色亮起，
表明空气质量良好，您可以选择较
低的风速。另一方面，如果空气质
量指示灯呈粉红色或红色亮起，则
表明空气质量较差，您可以选择较
高的风速，以便快速净化空气。
32
简体中文
风速指示灯 灵敏度级别
超级灵敏
灵敏
标准
2 转动速度旋钮可调节空气质量传感
器的灵敏度级别。
3 选中所需的灵敏度级别后，再次按
住 和 3 秒钟可保存设置。
注意
•更改灵敏度级别时，如果您在 10
秒钟未更改任何设置，或在更改灵
敏度级别后没有同时按住 和
达 3 秒钟，则产品将恢复正常工作
而不保存任何更改。
•更改灵敏度级别并保存后，只要打
开产品，其就会按照最近设置的灵
敏度级别运行。
设置空气质量传感器的灵敏度
本产品可以调整空气质量传感器的灵敏
度。灵敏度分为三个级别 ：
• 超级灵敏（默认设置）
• 灵敏
• 标准
您可通过以下方法调节空气质量传感器
的灵敏度 ：
注意
•将产品设置为较高灵敏度时，净化
器会对空气中的污染物变得更加敏
感。当净化器处于自动模式时，其
很可能会选择更高的风速。空气质
量传感器会按照较高的灵敏度选择
空气质量指示灯的适当颜色。
1 拔掉插头后，重新插上并启动产品。
在产品打开后的 5 至 30 秒内，同
时按住 和 3 秒钟。
»相应的风速指示灯将开始闪烁，
以指明空气质量传感器的当前
灵敏度级别。
3秒
33
简体中文
5 清洁
注意
•清洁产品前，务必先将电源插头拔
掉。
•切勿将本产品浸入水中或任何其它
液体中。
•切勿使用研磨性、腐蚀性或易燃性
清洁剂（例如漂白剂或酒精）清洁
本产品的任何部件。
•只有预过滤网可以用水清洗。空气
净化过滤网不可水洗，也不可用吸
尘器清洁。
清洁计划
频率 清洁方法
必要时
使用干软布清洁产
品表面。
清洁出风口盖
每两个月 使用干棉签清洁空
气质量传感器。
当滤网清洁指示
灯 亮起时 清洁预过滤网。
当滤网更换指示
灯 开始闪烁
时
更换空气净化过滤
网。
清洁产品机身
定期清洁产品的内侧和外侧，防止灰尘
积聚。
1 使用柔软的干布擦去产品机身上的
灰尘。
2 使用柔软的干布清洁进风口和出风
口。
清洁出风口盖
1 要解锁出风口盖，请顺时针转动开
盖旋钮，然后向上拉动盖子即可将
其卸下。
2 用软刷除去盖子上的灰尘。
3 要重新安装出风口盖，请先将带凸
缘的一面插入机器，然后轻压另一
侧直到出风口盖正确锁定。
34
简体中文
清洁空气质量传感器
每 2 个月清洁一次空气质量传感器，
确保产品以最佳性能运行。如果产品用
在多尘的环境中，请经常进行清洁。
1 使用软刷清洁空气质量传感器的进
风口和出风口。
2 打开空气质量传感器的盖子。
3 使用稍微浸湿的棉签清洁传感器、
进风口和出风口，最后用干棉签擦
干。
4 关闭传感器盖。
35
简体中文
清洁预过滤网
滤网提示灯状态 按此操作
亮起 清洁预过滤网
注意
•滤网清洁指示灯 大约每月亮起
一次。
1 请立即致电飞利浦售后服务中心
（4009200180）清洁预过滤网。
36
简体中文
6 更换空气净化过
滤网
了解健康空气智能锁
本产品具有健康空气智能锁，旨在确保
产品运行过程中，滤网在最佳条件下工
作。当滤网快满载并且必须进行更换时，
更换滤网指示灯 ( ) 将开始闪烁。
如果您不及时更换过滤网 ：
»更换滤网指示灯 ( ) 会持续
亮起。
»产品将停止运行并且锁定。
请立即致电飞利浦售后服务中
心（4009200180）更换滤网。
更换空气净化过滤网
滤网提示灯状态 按此操作
闪烁 更换空气净化过
滤网
注意
•空气净化过滤网不可水洗，也不可
用吸尘器清洁。
1 取出产品两侧的预过滤网。
2 使用滤网上的标签取出产品两侧的
空气净化过滤网，轻轻将其放入垃
圾桶。
注意
•请勿接触滤网的褶皱面，或闻滤网
的气味，因为其包含从空气中收集
的污染物。
•弃置用过的滤网后，请洗净双手。
3 拆掉新滤网上的所有包装材料。
37
简体中文
4 将新滤网放入产品两侧。
5 将预过滤网正确放回产品后，重置
空气净化过滤网使用寿命计数器。
（请参阅第 7 章“重置滤网使用寿
命计数器”。）
7 重置滤网使用寿
命计数器
更换过滤网后，请务必也重置过滤网使
用寿命计数器。这可使产品与过滤网使
用寿命同步。
1 按住 保持 3 秒钟。
»滤网指示灯熄灭，产品将自动
恢复工作。
3秒
38
简体中文
8 故障排除
本章归纳了您在使用产品时最常遇到的问题。如果您无法根据下面的信息解决问题，
请与您所在国家 /地区的客户服务中心联系。
问题 可能的解决方法
产品即使接通电源也无
法工作。
•过滤网更换指示灯持续亮起后，您尚未更换相应的过
滤网，此时机器会被锁定。在此情况下，更换过滤网
并重置过滤网时间。
出风口中无空气排出。 将插头插入插座，然后打开产品。
出风口排出的气流比之
前明显减弱。
•预过滤网变脏。清洁预过滤网（请参阅“清洁”一章）。
•请确保您已拆除过滤网的所有包装材料。
即使在产品已经运行很
长时间以后，空气质量
也未见显著改善。
•某一过滤网可能没有放在产品内部。请确保按以下顺
序正确安装所有滤网，首先从最里面的滤网开始 ：
1)
空气净化过滤网 ；
2) 预过滤网。
•空气质量传感器湿了。室内湿度过高，因此形成了冷
凝水。确保空气质量传感器清洁干燥（请参阅“清洁”
一章）。
空气质量指示灯的颜色
始终保持不变。
空气质量传感器变脏。清洁空气质量传感器（请参阅“清
洁”一章）。
产品散发出一种奇怪的
味道。
前几次使用产品时，其可能会产生塑料味。这是正常的。
不过，如果产品发出烧焦的气味，请联系飞利浦经销商
或经授权的飞利浦服务中心。当滤网很脏时，产品也可
能会发出难闻的气味。在这种情况下，请清洁或更换相
关的滤网。
我是过敏症患者，需要
更干净清新的空气。
您可以更改空气质量传感器的灵敏度（请参阅“使用产品”
一章的“设置空气质量传感器的灵敏度”部分），使产品
能够更全面细微地净化空气。
产品声音过大。
•请检查是否已经除去过滤网上的所有包装材料。
•如果产品声音仍然太大，您可以将风速更改为较低的
风速级别。
我已经更换过了过滤网，
但是产品还是一直指示
需要更换滤网。
可能是您未重置滤网使用寿命计数器。启动产品。然后，
按住 3 秒钟。
39
简体中文
9 保修与服务
如果您需要了解信息或有任何疑问，请
与您所在国家 /地区的飞利浦客户服务
中心联系（4009200180）。如果您所
在的国家 /地区没有飞利浦客户服务中
心，请向当地的飞利浦经销商求助。
订购部件或附件
如果您必须更换部件或需要购买额外的
部件，请与您所在国家 /地区的飞利浦
客户服务中心联系（4009200180）。
10 注意事项
电磁场 (EMF)
本飞利浦产品符合所有有关暴露于电磁
场的适用标准和法规。
符合 EMF 标准
Koninklijke Philips N.V. 主要面向广大
消费者制造和销售各类产品，包括通常
能发射和接收电磁信号的各种电子设备。
飞利浦的主要业务原则之一就是要对自
己的产品采取各种必要的健康和安全措
施，使其符合所有相应的法律要求，并
在制造产品时严格遵照适用的 EMF 标
准。
飞利浦致力于开发、生产和销售对人体
健康无任何危害的产品。飞利浦确认，
据目前的科学证明，如果其产品使用得
当，则对人体毫无危害。
长期以来，Philips 始终在国际 EMF 和
安全标准的制定工作中扮演着积极的角
色，这就使 Philips 总能预知标准的发
展趋势，并率先应用到其产品中去。
回收
弃置产品时，请不要将它与一般生活垃
圾一同丢弃，应将其交给官方指定的回
收中心。 这样做有利于环保。
© 2015 Koninklijke Philips N.V. 4241 210 83151
出版日期 ：
2015-07-10
产品 ：飞利浦空气净化器泰系列TY5080
型号 ：KJ710G-T01
额定电压 ：220V～
额定频率 ：50Hz
额定输入功率 ：65 W
生产日期 ：请见产品本体
产地 ：韩国
经销单位：飞利浦（中国）投资有限公司
上海市天目西路218号1602-1605
全国顾客服务热线：4009 200 180
本产品根据国标GB4706.1-2005,
GB4706.45-2008制造