R-Go Tools RGORIDUOBL User Manual
Displayed below is the user manual for RGORIDUOBL by R-Go Tools which is a product in the Multimedia Carts & Stands category. This manual has pages.
Related Manuals
R-Go Riser Duo
Tablet stand
Tablet stand instruction manual
Step 1
The bottom side of a
stand
Step 2 Step 3
Flip the document holder until
parallel with the stand
Flip over the whole stand
Step 4
Grab top and middle plate of the stand and
leave the bottom on the table
Step 5
Open the stand and put in desired
slot of your height
Step 6
Insert the support in the slot of your
desired height
Step 7
Lift the top plate of the stand (1)
Step 8 Step 9
3
1
2
1
4
1
2
2
The top plate (3) is right-angled with the middle
plate (4)
And turn both tablet support at the same time (use both hands).
Make sure you turn the tablet support until the hook is in front of
the tablet slot
Step 10 Step 11
Make sure that the hooks of the tablet supports go into the
tablet slots, while (1) lifting the top plate until it is vertical
Move the tablet hook unto the slot (1) and then move the hook
around the middle plate (2) until the hook is right-angled with
the middle plate
Step 12 Step 13
Make sure that the tablet support is hooked around the
middle plate. Your tablet stand is ready for use!
R-Go Riser Duo
Laptop stand
Laptop stand instruction manual
Step 1 Step 2
The bottom side of a stand Flip over the document holder
Step 3 Step 4
Flip over until parallel with the stand Flip over the whole stand
Step 5 Step 6
Grab top and middle plate of the stand and
leave bottom on the table
Open the stand and put in desired slot of
your height
Step 7 Step 8
inser the support in the slot of your desired
height
Lift the top plate of the stand (1)
Step 9 Step 10
Turn both laptop supports (2). Make sure that both
laptop supports are right angles to the top plate
Lower the top plate and make sure that both laptop supports go
into the laptop slot
Step 11 Step 12
The top plate rest on the middle plate and the laptop
supports are in the laptop slot. The laptop stand is now
ready to use!