Rackmount.IT RM-CI-T6-MC User Manual
Displayed below is the user manual for RM-CI-T6-MC by Rackmount.IT which is a product in the Rack Accessories category. This manual has pages.
Related Manuals
Rackmount.IT rack mount kits are RoHS
compliant, developed & manufactured in the
Netherlands and made of rst quality parts.
Type
Product Line
Type
Supported Models
DIMENSIONS
COLOR
PRODUCT DIMENSIONS
PACKING DIMENSIONS
(height x width x depth)
PACKAGE CONTENTS
MOUNTING INSTRUCTIONS
Consider the environment,
recycle where applicable.
In case of problems please contact your
reseller or sales@rackmount.it.
EMEA Ofce
Nonnenveld 27
4811 HN Breda
The Netherlands
T +31 76 200 37 40
E sales@rackmount.it
WWW.RACKMOUNT.IT
US Ofce
9201 Metric Blvd - Unit A
Austin - TX 78758
United States
T +1 512 521 03 33
E sales-us@rackmount.it
Qty Description
CISRACK
RM-CI-T6-MC
MERAKI MX68
MERAKI MX68CW
MERAKI MX68W
1U
Metallic Blue
80 x 520 x 270 mm
3.14 x 20.47 x 10.63 in
44 x 482 x 217 mm
1.73 x 18.98 x 8.54 in
Revision 1 - 30-09-2021
1 CisRack + light pipe
1 Media converter
4 Zip ties
1 Torx T8 key
1 USB/DC cable
1 Bolt M3x6mm
1 Nut M3
1. Remove the screw from the right bottom of the media converter and use it to x the media converter on the rack.
2. Remove the four rubber feet from your Cisco appliance.
3. Remove the two bolts (situated on the front side of the appliance) from the bottom of the Cisco appliance.
4. Place your Cisco appliance backwards through the FRONT opening of the rack.
5. Turn over the rack with the Cisco appliance and use the original bolts to x the appliance on the rack and turn it back over.
6. Plug in the power cord of the media converter, plug the USB cable into the appliance and tie the excess length of the power
cable down with a zip tie.
7. Place the power supply on the add-on, tie it down with the two zip ties and slide it into the rack. Fix with a bolt and nut.
8. Lead the low voltage power cable through the large square hole towards the front of the rack and connect it to the power
inlet. Use a zip tie to secure the power cable on the rack and tie the excess length of the cable down with a zip tie.
9. Place the light pipe through the opening of the rack. See picture above.
10. Place your CisRack in your 19 inch rack.
Please ensure proper ventilation according to the network appliance manufacturer guidelines.