Rackmount.IT RM-CI-T8 User Manual
Displayed below is the user manual for RM-CI-T8 by Rackmount.IT which is a product in the Rack Accessories category. This manual has pages.
Related Manuals
Rackmount.IT rack mount kits are RoHS
compliant, developed & manufactured in the
Netherlands and made of rst quality parts.
Type
Product Line
Type
Supported Models
DIMENSIONS
COLOR
PRODUCT DIMENSIONS
PACKING DIMENSIONS
(height x width x depth)
PACKAGE CONTENTS
MOUNTING INSTRUCTIONS
Consider the environment,
recycle where applicable.
In case of problems please contact your
reseller or sales@rackmount.it.
EMEA Ofce
Nonnenveld 27
4811 HN Breda
The Netherlands
T +31 76 200 37 40
E sales@rackmount.it
WWW.RACKMOUNT.IT
US Ofce
9201 Metric Blvd - Unit A
Austin - TX 78758
United States
T +1 512 521 03 33
E sales-us@rackmount.it
Qty Description
CISRACK
RM-CI-T8
CISCO FIREPOWER 1010
CISCO ASA 5506-X
1.3/2U
Metallic Blue
80 x 520 x 270 mm
3.14 x 20.47 x 10.63 in
57 x 482 x 217 mm
2.24 x 18.98 x 8.54 in
1. Place the power supply on the rack and tie it down with 2 zip ties.
2. Optionally, at your own risk, you can remove the front plate (bezel) from the Cisco Firepower 1010
and place it on the front of the rack. Check your Cisco owner’s manual to verify you don’t infringe your
warranty by this procedure.
3. Place your Cisco backwards on the rack, x the Cisco with the 2 bolts at the bottom and tighten them
lightly.
4. Lead the low voltage power cable through the large square hole towards the front of the rack and
connect it to the power inlet.
5. Tie the excess length of the power cable down with the 3rd zip tie.
6. Place your CisRack in your 19 inch rack.
7. Place the Rackmount.IT front plate BELOW the CisRack in your 19 inch rack. Together they are 2U high.
Please ensure proper ventilation according to the network appliance manufacturer guidelines.
1 CisRack + front plate
3 Zip ties
2 Bolts M3x8mm
Revision 2 - 12-10-21