Rackmount.IT RM-WG-T7 User Manual
Displayed below is the user manual for RM-WG-T7 by Rackmount.IT which is a product in the Rack Accessories category. This manual has pages.
Related Manuals
Rackmount.IT rack mount kits are RoHS
compliant, developed & manufactured in the
Netherlands and made of rst quality parts.
Type
Product Line
Type
Supported Models
DIMENSIONS
COLOR
PRODUCT DIMENSIONS
PACKING DIMENSIONS
(height x width x depth)
PACKAGE CONTENTS
MOUNTING INSTRUCTIONS
Consider the environment,
recycle where applicable.
In case of problems please contact your
reseller or sales@rackmount.it.
EMEA Ofce
Nonnenveld 27
4811 HN Breda
The Netherlands
T +31 76 200 37 40
E sales@rackmount.it
WWW.RACKMOUNT.IT
US Ofce
9201 Metric Blvd - Unit A
Austin - TX 78758
United States
T +1 512 521 03 33
E sales-us@rackmount.it
Qty Description
WG-RACK
RM-WG-T7
RM-WG-T7i
1.3/2U
WatchGuard Red
80 x 520 x 270 mm
3.14 x 20.47 x 10.63 in
46 x 482 x 217 mm
1.81 x 18.98 x 8.54 in
WATCHGUARD
FIREBOX T80
1. Place the power supply on the rack and tie it down with 2 zip ties.
2. Remove the 4 rubber feet from the WatchGuard.
3. Remove the bolt from the side of the appliance with the Torx key.
4. Place your WatchGuard unit on the rack and x the unit with the provided bolt and tighten it
lightly.
5. Tie the excess length of the power cable down with the 3rd zip tie.
6. Connect the cables from your WatchGuard to the connectors. Tip: start with the bottom row.
7. Optional: use two zip ties to hold the cables together.
8. Place your WG-Rack in your 19 inch rack.
Please ensure proper ventilation according to the network appliance manufacturer guidelines.
Please note that this unit is slightly higher than 1U.
1 WG-Rack + RJ45 couplers
5 Zip ties
1 Torx key
1 Bolt 3x6mm
10 Cables - 0.5 meter
Industrial version is supplied with shielded couplers and cables Revision 5 - 09-06-2021