RAM Mounts RAM-101U-VE1-HC1 User Manual
Displayed below is the user manual for RAM-101U-VE1-HC1 by RAM Mounts which is a product in the Mounting Kits category. This manual has pages.
Related Manuals
BACK VIEW
6. KNOCK-OUT HOLES FOR MOUNTING (46 TOTAL)
AMPS PATTERNS IN CENTER
7. MAGNET INSERT MARKERS
BACK VIEW
RAM® HANDI-CASE™ SPECIFICATIONS GUIDE
OUTSIDE OF THE RAM® HANDI-CASE™ CAN BE USED AS A
HARD WRITING SURFACE, MOUSE PAD, AND/OR CAN
MOUNT ANY RAM HOLDER OR DOUBLE BALL MOUNT,
USING THE AMPS KNOCK-OUT HOLES.
PARTS INDEX
A. HANDI-CASE SUB ASSEMBLY (QTY. 1)
B. NOTEPAD SPRING CLAMP (QTY. 1)
C. RAM METAL BLUE INK PEN (QTY. 1)
D. 25MM OD MAGNET (QTY. 2)
E. #8-32 X ½” MACHINE SCREW (QTY. 2)
F. #8-32 X 5/8” MACHINE SCREW (QTY. 4)
G. #8-32 NYLOCK NUT (QTY. 6)
A
B
C
DEF
G
RMR-INS-HC1
1
2
3
1
2
222
2
2
2
3
3
4
4
4
4
2
2
7
7
FRONT VIEW
1. ATTACHMENT OPTIONS FOR HC1-BALL (SEE REVERSE SIDE)
2. KNOCK-OUT HOLES FOR POWER CABLES
3. KNOCK-OUT HOLES FOR BALL BASE MOUNTING (AMPS PATTERNS)
4. KNOCK-OUT HOLES FOR NOTEPAD SPRING CLAMP (4 OPTIONS)
5. SLOT INSERTS FOR MOUSE CABLE (KNOCKOUT HOLES FOR ZIP-TIES)
STORAGE COMPARTMENT INSIDE HANDI-CASE™
CAN HOLD DOCUMENTS, NOTEPADS, TOOLS,
HARDWARE, POWER SUPPLIES, BATTERIES, AND
OTHER ACCESSORIES.
6
INSIDE VIEW
8
9
9
9
99
9
9
9
9
10
FRONT VIEW
INSIDE VIEW
8. PEN CADDY
9. MAGNET INSERTS FOR MAGNETIC
MOUNTING
10. MAGNET INSERTS FOR SECURING PEN
TO HANDI-CASE SURFACE
55
7
7
7
7
7
7
7
RAM Mounting Systems
8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
www.rammount.com
support@rammount.com
RAM® HANDI-CASE™ ASSEMBLY GUIDE
RECOMMENDED ACCESSORIES
MOUNTING OPTION:
USE QTY. 4 (F) MACHINE SCREWS AND QTY. 4 (G) NUTS TO ATTACH HANDI-CASE TO ANY
RAM MOUNT THROUGH THE #6 KNOCK-OUT HOLES ON “BACK VIEW” (SEE REVERSE SIDE).
MAGNET OPTIONS:
WHEN USING (D) MAGNETS, ALWAYS USE EVEN AND SYMMETRICAL PLACEMENT. FLAT
SIDE OF MAGNET MUST FACE TOWARD HANDI-CASE™. SNAP MAGNETS IN PLACE
USING OPPOSITE END OF A SCREWDRIVER.
PEN CLIP OPTION - ATTACH MAGNETS TO #10 INSERTS ON “INSIDE VIEW” (SEE
REVERSE SIDE), ALLOWING (C) PEN TO SECURE AGAINST HANDI-CASE™ SURFACE.
MOUNTING OPTION - ATTACH MAGNETS TO ANY OF THE #9 INSERTS ON “INSIDE VIEW”,
ALLOWING HANDI-CASE™ TO SECURE AGAINST ANY FERRO-MAGNETIC SURFACE.
PEN CLIP OPTION MOUNTING OPTION
NOTEPAD SPRING CLAMP OPTION:
FOR CLIPPING DOCUMENTS TO HANDI-CASE™ SURFACE, (B)
NOTEPAD SPRING CLAMP CAN ATTACH TO ANY OF THE #4
KNOCK-OUT HOLES ON “FRONT VIEW” (SEE REVERSE SIDE).
TO ATTACH, USE QTY. 2 (E) SCREWS AND QTY. 2 (G) NUTS.
RAM MOUNT NOT INCLUDED
F
D
C
D
INSIDE VIEW
FRONT VIEW
B
E
RAM® HANDI-CASE™ MAGNET (2-PACK)
ADDITIONAL MAGNETS WILL ALLOW YOU TO
EITHER UTILIZE BOTH MAGNET OPTIONS OF THE
HANDI-CASE, OR TO APPLY MAGNETIC MOUNTING
OPTION WHILE HOLDING HEAVIER SUPPLIES.
P/N: RAM-HC1-MAGU
RAM® HANDI-CASE™ 1” AND 1.5” BALL BASES
ADAPT ANY RAM DOUBLE BALL MOUNT TO THE TOP
LEFT OR RIGHT CORNERS OF YOUR HANDI-CASE™,
ALLOWING YOU TO MOUNT ANY HANDHELD DEVICES.
B-SIZE P/N: RAM-HC1-BALL-BU
C-SIZE P/N: RAM-HC1-BALL-CU
RAM® SLIDE-N-LOCK™ UNIVERSAL DOCK PLATE
ALLOWS YOU TO QUICKLY CONNECT YOUR
HANDI-CASE™ TO YOUR RAM MOUNT SYSTEM
WITH A KEY LOCK OPTION.
P/N: RAP-315U
RMR-INS-HC1
RAM Mounting Systems
8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
www.rammount.com
support@rammount.com