Table of Contents
RAM Mounts RAM-109-1APU User Manual
Displayed below is the user manual for RAM-109-1APU by RAM Mounts which is a product in the Mounting Kits category. This manual has pages.
Related Manuals
SOME ELECTRONICS MAY REQUIRE
ADDITIONAL HOLES TO BE DRILLED
THROUGH (M) ADAPTER PLATE.
A
B
D
G
C
E
F
H
J
K
L
M
RAM-109H(V) PEDESTAL SWING ARM ASSEMBLY GUIDE
PARTS INDEX
A. RAM PEDESTAL BASE (HORIZONTAL / VERTICAL) (QTY. 1)
B. 6” CURVED SWING ARM (QTY. 1)
C. #3/8-16 X 3” LONG HEX BOLT (QTY. 1)
D. 2” RUBBER WASHER (QTY. 1)
E. 1 1/4” NYLON WASHER (QTY. 1)
F. 7/8” STEEL FLAT WASHER (QTY. 1)
G. #3/8-16 TIGHTENING KNOB (QTY. 1)
H. #5/8-16 X 1 1/4” LONG KNOB (QTY. 1)
J. 3/4” STEEL WASHER (QTY. 1)
K. 3/4” NYLON WASHER (QTY. 1)
L. 2” PLASTIC WASHER (QTY. 1)
M. 2” X 6” ELECTRONICS PLATE ADAPTER (QTY. 1)
The exclusive NPI Lifetime Warranty states that all RAM mounting
components and parts are warranted against defect in materials and
workmanship for the life of the product or part. NPI’s Lifetime Warranty
covers the mount or its components only. The mounted device is not
covered under the Lifetime Warranty and will not be replaced if damaged
as a result of mount failure. This warranty is expressly limited to the
persons in the United States, and all foreign countries who purchase RAM
for resale or use in the ordinary course of the buyer’s business. This
warranty does not cover any product or part that has been abused, worn
out, heated, ground or otherwise altered, used for a purpose other than
that for which it was intended, or used in a manner inconsistent with any
instructions regarding its use.
LIFETIME WARRANTY ON ALL MOUNTING COMPONENTS
RMR-INS-109
GREASE MUST BE APPLIED TO THREADS OF
(C) BOLT AND (H) KNOB FOR EASE OF ADJUSTMENT
RAM Mounting Systems
8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
www.rammount.com
support@rammount.com
SOME ELECTRONICS MAY REQUIRE
ADDITIONAL HOLES TO BE DRILLED
THROUGH (M) ADAPTER PLATE.
A
B
D
G
C
E
F
H
J
K
L
M
RAM-109H(V) PEDESTAL SWING ARM ASSEMBLY GUIDE
PARTS INDEX
A. RAM PEDESTAL BASE (HORIZONTAL / VERTICAL) (QTY. 1)
B. 6” CURVED SWING ARM (QTY. 1)
C. #3/8-16 X 3” LONG HEX BOLT (QTY. 1)
D. 2” RUBBER WASHER (QTY. 1)
E. 1 1/4” NYLON WASHER (QTY. 1)
F. 7/8” STEEL FLAT WASHER (QTY. 1)
G. #3/8-16 TIGHTENING KNOB (QTY. 1)
H. #5/8-16 X 1 1/4” LONG KNOB (QTY. 1)
J. 3/4” STEEL WASHER (QTY. 1)
K. 3/4” NYLON WASHER (QTY. 1)
L. 2” PLASTIC WASHER (QTY. 1)
M. 2” X 6” ELECTRONICS PLATE ADAPTER (QTY. 1)
The exclusive NPI Lifetime Warranty states that all RAM mounting
components and parts are warranted against defect in materials and
workmanship for the life of the product or part. NPI’s Lifetime Warranty
covers the mount or its components only. The mounted device is not
covered under the Lifetime Warranty and will not be replaced if damaged
as a result of mount failure. This warranty is expressly limited to the
persons in the United States, and all foreign countries who purchase RAM
for resale or use in the ordinary course of the buyer’s business. This
warranty does not cover any product or part that has been abused, worn
out, heated, ground or otherwise altered, used for a purpose other than
that for which it was intended, or used in a manner inconsistent with any
instructions regarding its use.
LIFETIME WARRANTY ON ALL MOUNTING COMPONENTS
RMR-INS-109
GREASE MUST BE APPLIED TO THREADS OF
(C) BOLT AND (H) KNOB FOR EASE OF ADJUSTMENT
RAM Mounting Systems
8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
www.rammount.com
support@rammount.com