RAM Mounts RAM-316-1-24-202U User Manual
Displayed below is the user manual for RAM-316-1-24-202U by RAM Mounts which is a product in the Mounting Kits category. This manual has pages.
Related Manuals
RAM® POD I Universal No-Drill™ Installation Guide (SIDE A)
IMPORTANT: BEFORE INSTALLATION, LOCATE THE BEST
POSSIBLE ATTACHMENT POINT FOR (D) FOOT BASE, SUCH AS A
SEAT BOLT OR ANY OTHER EXISTING SCREW, NUT OR BOLT. IF
DESIRED, YOU MAY DRILL YOUR OWN ATTACHMENT POINT USING
A BOLT, WASHER AND NUT, OR WITH A SHEET METAL SCREW.
RMR-INS-316-1
THE MOST STABLE MOUNTING PLATFORM IS ACHIEVED BY
MAKING SHARP BENDS AND STRAIGHT PROFILES IN THE FLEX
ROD; NOT LONG GRADUAL BENDS AS SHOWN. MAKING USE OF A
VICE OR PIPE TO HELP MAKE SHARP BENDS IS RECOMMENDED.
ADDITIONAL STABILITY CAN BE ACHIEVED BY PRE-BENDING THE
FLEX ROD TO BRACE AGAINST ANOTHER OBJECT WHILE
MOUNTED, SUCH AS THE CENTER CONSOLE OF YOUR VEHICLE.
SHARP
BENDS LONG
BENDS
CORRECT
NOTE: YOU MAY RECEIVE YOUR FLEX ROD WITH LONG OR GRADUAL
BENDS. THIS IS NORMAL AS IT IS NECESSARY FOR THE SHIPPING
PROCESS. IT IS RECOMMENDED TO MAKE THE BEST EFFORT TO
STRAIGHTEN THE ROD PRIOR TO THE INSTALLATION PROCESS. YOU
WILL WANT TO USE SHARP BENDS WHEN YOU ARE CONFIGURING
THE PRODUCT FOR USE IN YOUR SPECIFIC VEHICLE.
PARTS INDEX:
A. RAM® FLEX ROD (QTY. 1)
(LENGTH MAY VARY)
B. FLEX ROD TUBE COVERING (QTY. 1)
(LENGTH MAY VARY)
C. PIPE CLEVIS WITH OCT. BUTTON (QTY. 1)
D. STEEL SLOTTED FOOT BASE (QTY. 1)
E. #1/40-20 X 1” SOCKET CAP SCREW (QTY. 1)
F. #1/40-20 NYLOCK NUT
G. #10-24 X 1 3/4” MACHINE SCREW (QTY. 1)
H. #10-24 NYLOCK NUT (QTY. 1)
INCORRECT
RAM® POD I Universal No-Drill™ Installation Guide (SIDE A)
IMPORTANT: BEFORE INSTALLATION, LOCATE THE BEST
POSSIBLE ATTACHMENT POINT FOR (D) FOOT BASE, SUCH AS A
SEAT BOLT OR ANY OTHER EXISTING SCREW, NUT OR BOLT. IF
DESIRED, YOU MAY DRILL YOUR OWN ATTACHMENT POINT USING
A BOLT, WASHER AND NUT, OR WITH A SHEET METAL SCREW.
RMR-INS-316-1
THE MOST STABLE MOUNTING PLATFORM IS ACHIEVED BY
MAKING SHARP BENDS AND STRAIGHT PROFILES IN THE FLEX
ROD; NOT LONG GRADUAL BENDS AS SHOWN. MAKING USE OF A
VICE OR PIPE TO HELP MAKE SHARP BENDS IS RECOMMENDED.
ADDITIONAL STABILITY CAN BE ACHIEVED BY PRE-BENDING THE
FLEX ROD TO BRACE AGAINST ANOTHER OBJECT WHILE
MOUNTED, SUCH AS THE CENTER CONSOLE OF YOUR VEHICLE.
SHARP
BENDS LONG
BENDS
CORRECT
NOTE: YOU MAY RECEIVE YOUR FLEX ROD WITH LONG OR GRADUAL
BENDS. THIS IS NORMAL AS IT IS NECESSARY FOR THE SHIPPING
PROCESS. IT IS RECOMMENDED TO MAKE THE BEST EFFORT TO
STRAIGHTEN THE ROD PRIOR TO THE INSTALLATION PROCESS. YOU
WILL WANT TO USE SHARP BENDS WHEN YOU ARE CONFIGURING
THE PRODUCT FOR USE IN YOUR SPECIFIC VEHICLE.
PARTS INDEX:
A. RAM® FLEX ROD (QTY. 1)
(LENGTH MAY VARY)
B. FLEX ROD TUBE COVERING (QTY. 1)
(LENGTH MAY VARY)
C. PIPE CLEVIS WITH OCT. BUTTON (QTY. 1)
D. STEEL SLOTTED FOOT BASE (QTY. 1)
E. #1/40-20 X 1” SOCKET CAP SCREW (QTY. 1)
F. #1/40-20 NYLOCK NUT
G. #10-24 X 1 3/4” MACHINE SCREW (QTY. 1)
H. #10-24 NYLOCK NUT (QTY. 1)
INCORRECT
A
B
C
D
E
FG
H
A
B
C
D
E
FG
H
RAM® POD I Universal No-Drill™ Installation Guide (SIDE B)
1. INSERT (A) FLEX ROD INTO (D) FOOT BASE.
TIGHTEN IN PLACE WITH (E) SOCKET SCREW
AND (F) NYLOCK NUT.
2. LOCATE THE ATTACHMENT POINT
THAT WILL SECURE YOUR RAM®
POD I™. START WITH THE BASE END
AND BEND THE (A) FLEX ROD USING
TIGHT BENDS, AND CONTINUE TO
SHAPE THE ARM UNTIL IT REACHES
ITS APPROXIMATE LOCATION
3. SLIDE (B) TUBE COVERING ONTO (A) FLEX ROD. INSTALL (C) PIPE CLEVIS
ON TOP OF FLEX ROD AND SECURE USING (G) MACHINE SCREW AND (H) NUT.
RAM Mounting Systems
8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
www.rammount.com
support@rammount.com RMR-INS-316-1
RAM® POD I Universal No-Drill™ Installation Guide (SIDE B)
1. INSERT (A) FLEX ROD INTO (D) FOOT BASE.
TIGHTEN IN PLACE WITH (E) SOCKET SCREW
AND (F) NYLOCK NUT.
2. LOCATE THE ATTACHMENT POINT
THAT WILL SECURE YOUR RAM®
POD I™. START WITH THE BASE END
AND BEND THE (A) FLEX ROD USING
TIGHT BENDS, AND CONTINUE TO
SHAPE THE ARM UNTIL IT REACHES
ITS APPROXIMATE LOCATION
3. SLIDE (B) TUBE COVERING ONTO (A) FLEX ROD. INSTALL (C) PIPE CLEVIS
ON TOP OF FLEX ROD AND SECURE USING (G) MACHINE SCREW AND (H) NUT.
RAM Mounting Systems
8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
www.rammount.com
support@rammount.com RMR-INS-316-1