RAM Mounts RAM-316-1-OQO1U User Manual
Displayed below is the user manual for RAM-316-1-OQO1U by RAM Mounts which is a product in the Holders category. This manual has pages.
Related Manuals
Parts Index
* not to scale
rammount.com
1.800.497.7479
support@rammount.com RAM® Pod™ I Vehicle Mount
RMR-INS-316-1
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Pr
oducts, Inc.T
o see more mounting options, visit rammount.com
Safety Precaution
Do not install this product near or over an airbag deployment area or in a location that obstructs the driver’s vision or interferes with vehicle
operation. National Products, Inc does not assume responsibility or liability for any such personal injury, death or property damage.
3Locate attachment point and use
existing seat bolt and washer to
secure the foot base assembly.
2Assemble the seat base as shown. Make sure you have
(A) flex rod pre-bent to the desired angle before sliding on
(B) tube covering.
C
E
F
A
B
H
G
D
1Pre-bend (A) flex rod to brace against
another object while mounted, such
as the center console of your vehicle.
Before installation, locate the best possible attachment point for (C) foot base, such as a seat bolt or any other existing screw, nut or bolt.
If desired, you may drill your own attachment point using a bolt, washer and nut, or with a sheet metal screw.
x 1
B
x 1
A
x 1
C
x 1
#10-24 x 3/4”
x 1
#10-24
x 1 x 1
1/4”-20 x 1”
x 1
1/4”-20
G
H
DE
F