RAM Mounts RAM-B-342-366U User Manual
Displayed below is the user manual for RAM-B-342-366U by RAM Mounts which is a product in the Mounting Kits category. This manual has pages.
Related Manuals
RMR-INS-B-342
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.To see more mounting options, visit rammount.com
Parts Index
* not to scale
rammount.com
1.800.497.7479
support@rammount.com RAM® Motorcycle Fork Stem Base
x 1
A
B
x 1
4
16
18
6
8
10
12
14
For a video demonstration of this install please visit rammount.com/instructions
C
x 1
5MM x 60MM
x 1
5MM
D
E
x 1 x 1 x 1 x 1 x 1 x 1
x 1
14MM
x 1
12MM
x 1
18MM
x 1
16MM
x 1
28MM
x 1
20MM
F
Measure inside diameter of fork stem to determine which
side of the (A) expansion plug your install requires.
Assemble components as shown before using appropriate (E)
Washer and (F) Nut Pocket Washer. Diameter of selected (E) Washer
must not be wider than diameter of the top cut of (A) Expansion
Plug. Tighten assembly until (F) Nut Pocket Washer has a firm grip
on (A) Expansion Plug.
Insert assembly into fork stem hole until ball plate is flush with your bike.
Tighten (C) Screw using a 3mm allen wrench. Periodically check the friction
of the assembly to ensure it is tightening properly. If your assembly is not
tightening, the (F) Nut Pocket Washer may not be gripping on the expansion
plug. Remove assembly from hole and pre-tighten further, then repeat.
1
12 - 26mm
A
12 - 26mm
27 - 33mm
27 - 33mm
Gently insert (A) expansion plug into stem hole and mark approximately 1/8”
above the opening. Remove plug and cut marked line. Measure 1” below
the top cut and cut along that line as well.
2
A
1”
1/8” Top cut
Top cut
Bottom cut
3
C
B
E
A
F
D