RAM Mounts RAM-B-410-A-238U User Manual
Displayed below is the user manual for RAM-B-410-A-238U by RAM Mounts which is a product in the Mounting Kits category. This manual has pages.
Related Manuals
Parts Index
* not to scale
rammount.com
1.800.497.7479
support@rammount.com RAM® Gas Tank Mount
x 1
A
x 1
B
x 1
#10-24
F
x 1
#10-24 x 1 1/2”
M
x 3
M5-0.8 x 25mm
I
x 1
C
x 3
D
x 4
M5-0.8 x 45mm
G
RMR-INS-410
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Pr
oducts, Inc.T
o see more mounting options, visit rammount.com
Safety Precaution
Do not install this product near or over an airbag deployment area or in a location that obstructs the driver’s vision or interferes with vehicle
operation. National Products, Inc does not assume responsibility or liability for any such personal injury, death or property damage.
Place the gas tank base on your traditional gas cap to determine the correct alignment with the bolts, and desired position of the RAM® Ball.
Important: Bolt alignment must be symmetrical.
Use any combination of the provided hardware to replace the factory screws on your gas cap when installing. It is important to note that each
of the screws on your gas cap may have different lengths. For every factory screw you replace, the replacement screw should be
approximately 12mm longer. Place provided washers under cap screw heads when installing.
1 2
x 4
E
K
x 3
M5-0.8 x 35mm
H
x 3
M6-1.0 x 25mm
L
x 3
M5-0.8 x 20mm
J
x 3
M5-0.8 x 16mm
F
B
A
C
M
G, H, I, J, K, or L
D or E