RAM Mounts RAM-GDS-DOCK-D2CMU User Manual
Displayed below is the user manual for RAM-GDS-DOCK-D2CMU by RAM Mounts which is a product in the Charging Station Organizers category. This manual has pages.
Related Manuals
The GDS Desktop Dock will support any
IntelliSkin™ connection, and will hold it in place
with built-in magnets.
User must supply a USB Type-C wall charger
device.
Insert USB Type-C cable into the rear port of
the GDS Desktop Dock. When plugged in,
your phone or tablet will detect power source
within two seconds. Genuine GDS USB cable
(provided) is required for proper operation of
GDS products.
*Support data transfer speeds of up to 480 Mbps
Supports USB C power profiles 5V @ 2A, 5V @ 3A,
12V @ 1.5A and 12V @ 3A or charging up to 48W.
rammount.com
1.800.497.7479
support@rammount.com GDS® Desktop Dock Charger
RPR-INS-GDS-DOCK-D2C
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Pr
oducts, Inc.T
o see more mounting options, visit rammount.com
While RAM® products are designed to function flawlessly, there is always the potential that the product may not function
as expected. Most often product issues can be resolved by the customer prior to sending the product in for warranty or
replacement. If you experience issues, please follow the guidelines below prior to contacting customer support for assistance.
Troubleshoot:
(Follow these steps if you encounter any charging issues with your GDS Dock)
• Verify that the dock’s power cord is securely plugged into the dock as well as the wall power source. Assure that the power
source is functional by testing with an alternate electronic device.
• Verify that the IntelliSkinTM connector is securely connected to your device.
• Verify that the IntelliSkin is seated properly in the receptacle of the GDS dock.
• After verifying the above steps, see GDS General Care and Maintenance below to verify that your dock and IntelliSkin has
been properly cleaned.
GDS General Care & Maintenance
• For any accidental spills or accumulated dirt on the pogo pins of the dock, use contact cleaner or alcohol on a cotton swab to
gently clean. Clean the contacts on the IntelliSkin, using contact cleaner or alcohol with a stiff brush.
• For industrial and heavy use environments, clean pogo pins and contacts on a regular basis.
3 year warranty on all electronic components / Lifetime Warranty on all non-electronic components
The exclusive NPI Lifetime Warranty states that all GDS non-electonic components and parts are warranted against defect in materials and
workmanship for the life of the product or part. NPI’s Lifetime Warranty covers the product or its components only.
The mount device is not covered under the Lifetime Warranty and will not be replaced if damaged as a result of mount failure. This warranty is
expressly limited to persons in the United States, and all foreign countries who purchase GDS for resale or use in the ordinary course of the buyer’s
business. This warranty does not cover any product or part that has been abused, worn out, heated, ground or otherwise altered, used for a
purchase other than that for which it was intended, or used in a manner inconsistent with any instructions regarding its use.
GDS®, IntelliSkin™, GDS Tech™, GDS Technology™, GDS Green™ and GDS Compatible™ are trademarks or registered trademarks of National Products Inc.
The distinctive D shape™ of the GDS connector is a trademark of National Products Inc. Patents and Trademarks: www.rammount.com/ip
Distinctive “D” shape
rammount.com
1.800.497.7479
support@rammount.com GDS® Desktop Dock Charger
RPR-INS-GDS-DOCK-D2C
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Pr
oducts, Inc.T
o see more mounting options, visit rammount.com