RAM Mounts RAM-GDS-SKIN-HS-SAM19U User Manual
Displayed below is the user manual for RAM-GDS-SKIN-HS-SAM19U by RAM Mounts which is a product in the Tablet Cases category. This manual has pages.
Related Manuals
RPR-INS-GDS-HS1
RAM® HandStand™Assembly Guide
1. Shift hand strap to the side to expose screw head. Loosen screw with screwdriver to disassemble:
2. Insert Nut into center nut pocket of Slip Washer.
White nylon inside Nut must be facing upward.
3. Insert Slip Washer with Nut into center hole of
your IntelliSkin™.
4. While holding Nut in place, reassemble the
RAM® HandStand™ from the outside of your
IntelliSkin™, fully tightening down on the screw.
For a video demonstration of this assembly, visit www.rammount.com/part/RAM-GDS-HS1U
The RAM® HandStand is compatible with any IntelliSkin™
that features the unique circular interface on the back. Nut Slip Washer HandStand™
RPR-INS-GDS-HS1
RAM® HandStand™Assembly Guide
1. Shift hand strap to the side to expose screw head. Loosen screw with screwdriver to disassemble:
2. Insert Nut into center nut pocket of Slip Washer.
White nylon inside Nut must be facing upward.
3. Insert Slip Washer with Nut into center hole of
your IntelliSkin™.
4. While holding Nut in place, reassemble the
RAM® HandStand™ from the outside of your
IntelliSkin™, fully tightening down on the screw.
For a video demonstration of this assembly, visit www.rammount.com/part/RAM-GDS-HS1U
The RAM® HandStand is compatible with any IntelliSkin™
that features the unique circular interface on the back. Nut Slip Washer HandStand™
More GDS Accessories & Warranty Info
National Products Inc.
8410 Dallas Ave S
Seattle WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
www.rammount.com
support@rammount.com
Visit for more GDS Products & Accessorieswww.gdstech.com
The exclusive NPI Lifetime Warranty states that all GDS™ non-electronic components and
parts are warranted against defect in materials and workmanship for the life of the product or
part. NPI’s Lifetime Warranty covers the product or its components only. The mounted device
is not covered under the Lifetime Warranty and will not be replaced if damaged as a result of
mount failure. This warranty is expressly limited to persons in the United States, and all
foreign countries who purchase GDS™ for resale or use in the ordinary course of the buyer’s
business. This warranty does not cover any product or part that has been abused, worn out,
heated, ground or otherwise altered, used for a purpose other than that for which it was
intended, or used in a manner inconsistent with any instructions regarding its use.
3 year warranty on all electronic components
Lifetime Warranty on all non-electronic components
RAM® Snap-Con™ GDS to
Micro USB 2.0 Adapter
P/N: RAM-GDS-AD1U
RAM® Shoulder Strap Accessory
P/N: RAM-GDS-SS1U
More GDS Accessories & Warranty Info
National Products Inc.
8410 Dallas Ave S
Seattle WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
www.rammount.com
support@rammount.com
Visit for more GDS Products & Accessorieswww.gdstech.com
The exclusive NPI Lifetime Warranty states that all GDS™ non-electronic components and
parts are warranted against defect in materials and workmanship for the life of the product or
part. NPI’s Lifetime Warranty covers the product or its components only. The mounted device
is not covered under the Lifetime Warranty and will not be replaced if damaged as a result of
mount failure. This warranty is expressly limited to persons in the United States, and all
foreign countries who purchase GDS™ for resale or use in the ordinary course of the buyer’s
business. This warranty does not cover any product or part that has been abused, worn out,
heated, ground or otherwise altered, used for a purpose other than that for which it was
intended, or used in a manner inconsistent with any instructions regarding its use.
3 year warranty on all electronic components
Lifetime Warranty on all non-electronic components
RAM® Snap-Con™ GDS to
Micro USB 2.0 Adapter
P/N: RAM-GDS-AD1U
RAM® Shoulder Strap Accessory
P/N: RAM-GDS-SS1U
RPR-INS-GDS-HS1
RPR-INS-GDS-HS1