RAM Mounts RAM-HOL-TABL30U User Manual
Displayed below is the user manual for RAM-HOL-TABL30U by RAM Mounts which is a product in the Holders category. This manual has pages.
Related Manuals
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.To see more mounting options, visit rammount.com
While holding (H) nuts in place, attach ball adapter to back of holder
using (G) screws. RAM® logo must be facing in the shown direction.
Attach additional (L) screws.
Twist key lock to release
internal slide.
Position (H) nuts in nut pockets,
guiding them in place with a pen.
*Note: End cups may vary
Parts
index
2
3
5
Using (K) screws, attach one end cup to Tab-Lock. 4Using (K) screws, attach one end cup to
the top slide with numbers facing down.
M
Insert top slide over internal vehicle dock.
6
1
*
*
KJ GL
4x 10x 2x 2x 2x 2x 2x
2x
2x
HN
*Note: Ball adapter sold separately
7Place (N) nuts into top slide,
aligning with holes in internal slide.
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.To see more mounting options, visit rammount.com
RMR-INS-TL
TAB-LOCK™
Phone: 1.800.497.7479
www.rammount.com
support@rammount.com Tab-Lock™
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.To see more mounting options, visit rammount.com
Turn Tab-Lock over. Secure front cover using (J) screws on back of slide
assembly. Lock must be engaged to access all four holes as shown.
Position front cover over
vehicle dock assembly.
10
15 16
Release lock and remove tablet. Set your top cup to the
appropriate setting using the reference number from step
13. When in place, fully tighten the (M) screws.
14
11 12
98
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.To see more mounting options, visit rammount.com
RMR-INS-TL
13 On the back of the top slide, review the numbers shown in the middle. Take note
of the lowest number that is fully visible. This reference will help you in the next
step. In this example, the lowest visible number is 8.
Place tablet on bottom docking cup. Press down on top cup to secure over tablet.
Attach (M) screws from behind the
internal slide. Do not fully tighten
(slides must remain loose).
With the numbers facing down, wedge
top slide cover into top slide. Using
pressure, snap into place.
Pull lever to engage lock.
TAB-LOCK™
2
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
Phone: 1.800.497.7479
www.rammount.com
support@rammount.com Tab-Lock™