RAM Mounts RAM-VB-141 User Manual
Displayed below is the user manual for RAM-VB-141 by RAM Mounts which is a product in the Mounting Kits category. This manual has pages.
Related Manuals
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
Vehicle base for the
SPECIFICATIONS
Placement
Passenger side, front, where seat rail frame
attaches to floor board.
Drilling Required
No - uses existing seat bolts
Seat Configuration
Bucket
Construction/Finish
Steel/Black Powdercoat
Dimensions
Pole or Pedestal
Sold Separately
Weight
4.9 lbs.
A = 12.75", B = 8", C = 5.25”
Hole Centers = 11”
Features
RAM-VB-141-SW1
RAM-VB-141
Misc.
Installs in minutes with no drilling required
Low profile keeps mount away from passenger leg space
Rock solid construction
Lifetime warranty
RAM No-Drill TM Seat Bases
National Products, Inc.
Item Number
RAM-VB-141 & RAM-VB-141-SW1
JEEP LIBERTY (2002-2012)
DODGE NITRO (2007-2011)
National Products, Inc.
8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
Website: www.ram-mount.com
Email: staff@ram-mount.com
National Products, Inc.
8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
Website: www.ram-mount.com
Email: staff@ram-mount.com
Vehicle base for the
INSTALLATION INSTRUCTIONS
1. Move the passenger seat back to its rearmost position and remove the front seat rail bolts on the passenger side.
2. Without moving the seat, place the No-Drill™ base over the front of the seat frame legs.
3. Align the holes in the base with those of the seat frame legs. The pedestal platform should be near the console.
4. Re-install the seat bolts and fully tighten.
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
RAM No-Drill TM Seat Bases
National Products, Inc.
Item Number
RAM-VB-141 & RAM-VB-141-SW1
JEEP LIBERTY (2002-2012)
DODGE NITRO (2007-2011)