RAM Mounts RAM-VB-195 User Manual
Displayed below is the user manual for RAM-VB-195 by RAM Mounts which is a product in the Mounting Kits category. This manual has pages.
Related Manuals
Installs in minutes with no drilling required. Placement is over the top
of the seat frame legs at floor board level. Rock solid construction
Lifetime warranty
Vehicle base for the
SPECIFICATIONS
Placement
Passenger side, in front, where seat frame meets
floor board.
Drilling Required
None - uses existing seat bolts
Seat Configuration
Bucket
Pole or Pedestal
Ordered Separately
Construction/Finish
Steel/Black Powdercoat
Dimensions
A = 14.875", B = 7", C = 2.00",
Hole Center = 13.50"
Features
RAM No-Drill TM Seat Bases
Item Number
RAM-VB-195 & RAM-VB-195-SW1
FORD F-150 (2015-NEWER)
Complete Vehicle Mount
RAM-VB-195-SW1
Vehicle Base
RAM-VB-195
A
B
C
RAM Mounting Systems
RMR-INS-VB-188
RAM Mounting Systems
8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
www.rammount.com
support@rammount.com
Vehicle base for the
INSTALLATION INSTRUCTIONS
Depending on your make and model, there may be pieces of plastic trim that cover the lower front of the seat frame
legs. This will need to be removed and stored. In some Ford models, under the plastic trim cover is a small Allen head
screw. Remove this to allow the plastic trim to accommodate the no drill base.
1. Move the passenger side seat to its rearmost position.
2. Using the appropriate socket, loosen and remove the
two bolts holding the seat frame legs to the floor board.
3. Gently lift the front of the seat upward to create a 1/4 inch gap under the seat frame legs.
4. Slide the No-Drill™ base under the seat frame legs with the pedestal platform near the center of the vehicle and
align the holes of the seat legs, no drill base, and threaded holes in the floor pan.
5. Re-install the two seat frame bolts. Start the thread by hand and then fully tighten with the socket wrench.
RAM No-Drill TM Seat Bases
Item Number
RAM-VB-195 & RAM-VB-195-SW1
FORD F-150 (2015-NEWER)
RAM Mounting Systems
RMR-INS-VB-188
RAM Mounting Systems
8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
www.rammount.com
support@rammount.com