Table of Contents
RAM Mounts RAP-B-138-AQ7-2 User Manual
Displayed below is the user manual for RAP-B-138-AQ7-2 by RAM Mounts which is a product in the Holders category. This manual has pages.
Related Manuals
RAM AQUA BOX PRO ACCESSORIES®
National Products, Inc. 8410 Dallas Ave S. Seattle, WA 98108 206-763-8361 www.rammount.com
SOME ACCESSORIES MAY NOT BE INCLUDED IN ALL KITS
QUICK RELEASE MOUNTING CLIP
POSITION BOTTOM TWO HOLES OF AQUA BOX ®
PRO ONTO THE LOCATOR PINS OF THE MOUNTING
CLIP. PRESS AQUA BOX BACK AGAINST CLIP TO ®
SNAP THE BACK RECEIVER INTO PLACE. PROVIDED
HARDWARE CONNECTS MOUNTING CLIP TO YOUR
RAM MOUNT.
SAFETY LANYARD
BELT CLIP BUTTON ADAPTER
SLIDE BUTTON ADAPTER INTO BOTTOM SLOT OF AQUA BOX ®
PRO. PRESS FIRMLY TO CLICK BUTTON INTO PLACE. COMPATIBLE
WITH STANDARD AFTERMARKET BELT CLIP BUTTON RECEIVERS.
RAM BELT CLIP BUTTON RECEIVER
SECURES OVER BELT CLIP BUTTON ADAPTER.
INSERT THIN LOOP THROUGH LEFT
SLOT UNDER THE BOTTOM OF THE
AQUA BOX PRO. PULL LANYARD ®
THROUGH THE LOOP AND TIGHTEN
TO SECURE SAFETY LANYARD.
RAM AQUA BOX® PRO 20 SERIES
INSERT FLEX-LENS FROM BEHIND BLACK AQUA BOX® FRAME. SECURE THE
SIDE LIP OF THE LENS IN FRONT OF THE BLACK FRAME. WORK YOUR WAY
AROUND THE ENTIRE LENS TO SECURE IN PLACE. PRESS FIRMLY
AGAINST EACH CORNER TO ENSURE PROPER LENS FITMENT. CHECK
LENS FITMENT PERIODICALLY TO KEEP FITTING CONSISTENT.
CAUTION: THIS PRODUCT IS NOT INTENDED FOR
UNDERWATER USE. THE RAM AQUA BOX® PRO
SERIES IS INTENDED TO PROTECT YOUR DEVICE
FROM SPLASH, MUD, RAIN OR OTHER HARSH
WEATHER. DO NOT SUBMERGE AQUA BOX® UNDER
WATER. THE ELECTRONIC DEVICE IS NOT COVERED
FOR DAMAGE WHEN USING THIS PRODUCT.
FLEX LENS PLACEMENT
FOAM PAD PLACEMENT
OPTIONAL FOAM STRIP CAN BE CUT AND CONFIGURED TO
ACCOMMODATE THIN DEVICES. FOAM STRIP CONFIGURATIONS
MAY VARY DEPENDING ON DEVICE. THE FOLLOWING EXAMPLE
DEMONSTRATES THE STANDARD USE OF THIS FOAM STRIP.
YOUR DEVICE IS NOT REQUIRED TO MAKE FIRM CONTACT
WITH FLEX LENS IN ORDER TO BE A SECURE FIT.
SIDE LIP IN FRONT
OF BLACK FRAME
CHECK INSIDE VIEW