RAM Mounts RAP-B-417-400U User Manual
Displayed below is the user manual for RAP-B-417-400U by RAM Mounts which is a product in the Cup Holders category. This manual has pages.
Related Manuals
1.800.497.7479
support@rammount.com
rammount.com
1.800.497.7479
support@rammount.com
rammount.com
Level Cup ™ XL
Level Cup ™ XL
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
Loosen the knob on the back
of the Level Cup XL to adjust
the overall height.
Loosen the knob on the back
of the Level Cup XL to adjust
the overall height.
Height Adjustment
Settings
Height Adjustment
Settings
Rubber Cap Placement (Optional)
Rubber Cap Placement (Optional)
Follow these steps if your cup/bottle tapers towards the bottom, or if your drink feels somewhat loose in the Level Cup XL.
*Important*: Adhesive solution may be extremely watery. Use caution while handling. Use of gloves and paper
towels recommended.
Follow these steps if your cup/bottle tapers towards the bottom, or if your drink feels somewhat loose in the Level Cup XL.
*Important*: Adhesive solution may be extremely watery. Use caution while handling. Use of gloves and paper
towels recommended.
Cut tip of tube to
expose adhesive.
Cut tip of tube to
expose adhesive.
1
1
Apply only a couple drops
of adhesive into the cap.
Apply only a couple drops
of adhesive into the cap.
2
2
While holding the Level Cup XL upside
down, position the cap over the fin of
the Level Cup XL. Repeat for remaining
rubber caps. Glue dries immediately.
While holding the Level Cup XL upside
down, position the cap over the fin of
the Level Cup XL. Repeat for remaining
rubber caps. Glue dries immediately.
3
3
RPR-INS-417
RPR-INS-417