Table of Contents
RAM Mounts RAP-S-NUT5-4U User Manual
Displayed below is the user manual for RAP-S-NUT5-4U by RAM Mounts which is a product in the Mounting Kits category. This manual has pages.
Related Manuals
RAM® Pin-Lock™ SECURITY NUT INSTRUCTIONS
A
RPR-INS-S-NUT
RAM Mounting Systems
8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
www.rammount.com
support@rammount.com
SECURITY NUT & KEY KNOB FUNCTIONS
A. SECURITY NUT WITH Pin-Lock™ PATTERN
(PATTERNS MAY VARY)
B. MATCHING Pin-Lock™ PATTERN ON KEY KNOB
C. #1/2”-20 THREADED HOLE
D. THROUGH-HOLE FOR SCREWDRIVER INSERT
SPARE KEY KNOBS CAN BE PURCHASED ON RAMMOUNT.COM, BY
SEARCHING KEYWORD: “KEYN”.
REPLACEMENT KEYS MUST MATCH SAME Pin-Lock™ PATTERN AS
YOUR CURRENT SECURITY KNOB.
SECURITY NUT KEY KNOB
B
CD
THE RAM® Pin-Lock™ SECURITY NUT CAN BE ADDED TO
ANY RAM® D-SIZE OR E-SIZE BALL AND SOCKET MOUNTING
SYSTEM. AFTER COMPLETING THE FOLLOWING STEPS,
YOUR RAM® MOUNT CAN BE LOOSENED AND ADJUSTED,
BUT CANNOT BE REMOVED OR DISASSEMBLED WITHOUT
THE USE OF THE KEY KNOB.
1. VERIFY THAT THE KNOB ON YOUR CURRENT RAM® MOUNT IS FULLY TIGHTENED.
2. POSITION SECURITY NUT OVER KEY
KNOB, ALIGNING THE Pin-Lock™ PATTERNS.
3. INSERT INTO KNOB, TIGHTENING
KEY KNOB BY HAND.
4. INSERT THIN SCREW DRIVER INTO (D) THROUGH-HOLE OF KEY KNOB.
USE LEVERAGE OF SCREWDRIVER TO FULLY TIGHTEN.
5. ONCE FULLY TIGHTENED, LOOSEN BY TWO FULL TURNS TO ALLOW LIMITED
ADJUSTABILITY OF YOUR RAM® MOUNT.
SECURITY NUT
RAM® Pin-Lock™ SECURITY NUT INSTRUCTIONS
A
RPR-INS-S-NUT
RAM Mounting Systems
8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
www.rammount.com
support@rammount.com
SECURITY NUT & KEY KNOB FUNCTIONS
A. SECURITY NUT WITH Pin-Lock™ PATTERN
(PATTERNS MAY VARY)
B. MATCHING Pin-Lock™ PATTERN ON KEY KNOB
C. #1/2”-20 THREADED HOLE
D. THROUGH-HOLE FOR SCREWDRIVER INSERT
SPARE KEY KNOBS CAN BE PURCHASED ON RAMMOUNT.COM, BY
SEARCHING KEYWORD: “KEYN”.
REPLACEMENT KEYS MUST MATCH SAME Pin-Lock™ PATTERN AS
YOUR CURRENT SECURITY KNOB.
SECURITY NUT KEY KNOB
B
CD
THE RAM® Pin-Lock™ SECURITY NUT CAN BE ADDED TO
ANY RAM® D-SIZE OR E-SIZE BALL AND SOCKET MOUNTING
SYSTEM. AFTER COMPLETING THE FOLLOWING STEPS,
YOUR RAM® MOUNT CAN BE LOOSENED AND ADJUSTED,
BUT CANNOT BE REMOVED OR DISASSEMBLED WITHOUT
THE USE OF THE KEY KNOB.
1. VERIFY THAT THE KNOB ON YOUR CURRENT RAM® MOUNT IS FULLY TIGHTENED.
2. POSITION SECURITY NUT OVER KEY
KNOB, ALIGNING THE Pin-Lock™ PATTERNS.
3. INSERT INTO KNOB, TIGHTENING
KEY KNOB BY HAND.
4. INSERT THIN SCREW DRIVER INTO (D) THROUGH-HOLE OF KEY KNOB.
USE LEVERAGE OF SCREWDRIVER TO FULLY TIGHTEN.
5. ONCE FULLY TIGHTENED, LOOSEN BY TWO FULL TURNS TO ALLOW LIMITED
ADJUSTABILITY OF YOUR RAM® MOUNT.
SECURITY NUT