Samsung C32R502FHR User Manual
Displayed below is the user manual for C32R502FHR by Samsung which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
User Manual
C27R50* C32R50*
The color and the appearance may differ depending on the product, and the specifications are subject to change without
prior notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
© Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Trademarks other than that of Samsung Electronics are owned by their respective owners.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e., where the user
manual has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e., where the user manual
has not been read).
You will be informed of the administration fee amount before a technician visits.
2
Table of contents
Before Using the Product
Securing the Installation Space 4
Precautions for storage 4
Safety Precautions 4
5 gninaelC
Electricity and Safety 5
6 noitallatsnI
7 noitarepO
Preparations
01 straP
01 lenaP lortnoC
11 ediug yeK tceriD
21 ediuG yeK noitcnuF
51 stroP fo sepyT
61 tliT tcudorP eht gnitsujdA
61 kcoL tfeht-itnA
Precautions for moving the monitor 17
Installing a Wall-mount Kit or Desktop Stand 18
91 noitallatsnI
91 dnatS eht gnihcattA
02 dnatS eht gnivomeR
Connecting and Using a Source Device
Read below before installing the monitor. 21
Connecting and Using a PC 21
Connection Using the HDMI or HDMI-DVI Cable 21
Connection Using the D-SUB Cable
(Analog Type) 22
Connecting to Headphones 22
32 rewoP eht gnitcennoC
Correct posture to use the product 24
42 noitallatsnI revirD
Setting Optimum Resolution 24
Screen Setup
SAMSUNG MAGIC Bright 25
62 ssenthgirB
62 tsartnoC
62 ssenprahS
62 roloC
14
Changing Brightness, Contrast and
Sharpness settings
HDMI Black Level 27
Eye Saver Mode 27
Game Mode 27
Response Time 27
Picture Size 28
Screen Adjustment 28
14
Changing the Volume setting
Table of contents
Setup and Reset
Self Diagnosis 30
Eco Saving Plus 34
FreeSync
32
Off Timer 34
PC/AV Mode 35
Source Detection 35
Key Repeat Time 35
Power LED On 35
Reset All 35
Information 36
Adjusting OSD (On Screen
Display) settings
Transparency 29
Language 29
Position 29
Display Time 29
Installing the Software
Easy Setting Box 37
Restrictions and Problems with the Installation 37
System Requirements 37
Troubleshooting Guide
Requirements Before Contacting Samsung Customer
Service Center
38
Testing the Product 38
Checking the Resolution and Frequency 38
Check the following. 38
Q & A 40
Specifications
General 41
Standard Signal Mode Table 42
Appendix
Responsibility for the Pay Service (Cost to
Customers) 46
Not a product defect 46
A Product damage caused by customer's fault 46
Others 46
4
Securing the Installation Space
Ensure some space around the product for ventilation. An internal temperature rise may cause ѣre and
damage the product. Be sure to allow the amount of space as shown below or greater when installing
the product.
ࣖThe exterior may differ depending on the product.
10 cm (3.93 Inches)
10 cm (3.93 Inches)
10 cm
(3.93 Inches)
10 cm
(3.93 Inches)
10 cm
(3.93 Inches)
Precautions for storage
High-glossy models can develop white stains on the surface if an ultrasonic wave humidiѣer is used
nearby.
ࣖContact your nearest Samsung Customer Service Center if you want to clean the inside of the product
(Service fee will be charged.)
Do not press the monitor screen with hands or other objects. There is a risk of damaging the screen.
Before Using the Product
Chapter 01
Safety Precautions
Warning A serious or fatal injury may result if instructions are not followed.
Caution Personal injury or damage to properties may result if instructions are
not followed.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE
ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high
voltage is present inside. It is
dangerous to make any kind of
contact with any internal part of this
product.
AC voltage: Rated voltage marked
with this symbol is AC voltage.
This symbol indicates that this
product has included important
literature concerning operation and
maintenance.
DC voltage: Rated voltage marked
with this symbol is DC voltage.
Class II product: This symbol indicates
that a safety connection to electrical
earth (ground) is not required.
Caution. Consult instructions for use:
This symbol instructs the user to
consult the user manual for further
safety related information.
5
Cleaning
ࣖExercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
ࣖTake the following steps when cleaning.
1
Power off the product and computer.
2
Disconnect the power cord from the product.
ࣖHold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric
shock may result.
3
Wipe the monitor with a clean, soft and dry cloth.
ࣕDo not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.
ࣕDo not spray water or detergent directly on the product.
4
Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.
5
Connect the power cord to the product when cleaning is ѣnished.
6
Power on the product and computer.
Electricity and Safety
Warning
࡙Do not use a damaged power cord or plug, or a loose power socket.
࡙Do not use multiple products with a single power socket.
࡙Do not touch the power plug with wet hands.
࡙Insert the power plug all the way in so it is not loose.
࡙Connect the power plug to a grounded power socket (type 1 insulated devices only).
࡙Do not bend or pull the power cord with force. Be careful not to leave the power cord under a heavy
object.
࡙Do not place the power cord or product near heat sources.
࡙
࡙
Clean any dust around the pins of the power plug or the power socket with a dry cloth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Caution
࡙Do not disconnect the power cord while the product is being used.
࡙Only use the power cord provided with your product by Samsung. Do not use the power cord with
other products.
࡙Keep the power socket where the power cord is connected unobstructed.
ࣕThe power cord must be disconnected to cut off power to the product when an issue occurs.
࡙Hold the plug when disconnecting the power cord from the power socket.
6
Warning
࡙DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT
INSTALL THE PRODUCT NEAR HEAT SOURCES.
࡙Do not install the product in poorly ventilated spaces such as a bookcase or closet.
࡙Install the product at least 10 cm away from the wall to allow ventilation.
࡙Keep the plastic packaging out of the reach of children.
ࣕChildren may suffocate.
࡙Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.)
ࣕThe product may fall and become damaged and/or cause an injury.
ࣕUsing the product in an area with excess vibration may damage the product or cause a fire.
࡙Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or
smoke.
࡙Do not expose the product to direct sunlight, heat, or a hot object such as a stove.
ࣕThe product lifespan may be reduced or a fire may result.
࡙Do not install the product within the reach of young children.
ࣕThe product may fall and injure children.
࡙Edible oil (such as soybean oil) may damage or distort the product. Keep the product away from oil
pollution. And do not install or use the product in the kitchen or near the kitchen stove.
Caution
࡙Do not drop the product while moving.
࡙Do not set down the product on its front.
࡙When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of
the product is not protruding.
ࣕThe product may fall and become damaged and/or cause an injury.
ࣕInstall the product only on cabinets or shelves of the right size.
࡙Set down the product gently.
ࣕProduct failure or personal injury may result.
࡙Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical
substances, extreme temperatures or a significant presence of moisture, or a place where
the product will operate continuously for an extended period of time) may seriously affect its
performance.
ࣕBe sure to consult Samsung Customer Service Center if you want to install the product at such a
place.
Installation
7
Warning
࡙There is a high voltage inside the product. Never disassemble, repair or modify the product
yourself.
ࣕContact Samsung Customer Service Center for repairs.
࡙To move the product, first disconnect all the cables from it, including the power cable.
࡙If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cord
immediately and contact Samsung Customer Service Center.
࡙Do not let children hang from the product or climb on top of it.
ࣕChildren may become injured or seriously harmed.
࡙If the product is dropped or the outer case is damaged, turn off the power and disconnect the
power cord. Then contact Samsung Customer Service Center.
ࣕContinued use can result in a fire or electric shock.
࡙Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product.
ࣕThe product or heavy objects may fall as children try to reach for the toys or sweets resulting in a
serious injury.
࡙During a lightning or thunderstorm, power off the product and remove the power cable.
࡙Do not drop objects on the product or apply impact.
࡙Do not move the product by pulling the power cord or any cable.
࡙If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area
immediately.
࡙Do not lift or move the product by pulling the power cord or any cable.
࡙Do not use or keep combustible spray or an inflammable substance near the product.
࡙Ensure the vents are not blocked by tablecloths or curtains.
ࣕAn increased internal temperature may cause a fire.
࡙Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (paper,
matches, etc) into the product (via the vent or input/output ports, etc).
ࣕBe sure to power off the product and disconnect the power cord when water or other foreign
substances have entered the product. Then contact Samsung Customer Service Center.
࡙Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the
product.
ࣕBe sure to power off the product and disconnect the power cord when water or other foreign
substances have entered the product. Then contact Samsung Customer Service Center.
Operation
8
Caution
࡙Leaving the screen fixed on a stationary image for an extended period of time may cause
afterimage burn-in or defective pixels.
ࣕActivate power-saving mode or a moving-picture screen saver if you will not be using the
product for an extended period of time.
࡙Disconnect the power cord from the power socket if you do not plan on using the product for an
extended period of time (vacation, etc).
ࣕDust accumulation combined with heat can cause a fire, electric shock or electric leakage.
࡙Use the product at the recommended resolution and frequency.
ࣕYour eyesight may deteriorate.
࡙Do not put AC/DC adapters together.
࡙Remove the plastic bag from the AC/DC adapter before you use it.
࡙Do not let water enter the AC/DC adapter device or get the device wet.
ࣕAn electric shock or fire may result.
ࣕAvoid using the product outdoors where it can be exposed to rain or snow.
ࣕBe careful not to get the AC/DC adapter wet when you wash the floor.
࡙Do not put the AC/DC adapter near to any heating apparatus.
ࣕOtherwise, a fire may result.
࡙Keep the AC/DC adapter in a well-ventilated area.
࡙If you place the AC/DC power adapter so that it is hanging with the cord input facing upwards,
water or other foreign substances could enter the Adapter and cause the Adapter to malfunction.
Make sure to rest the AC/DC power adapter flat on a table or the floor.
࡙Insert the power plug into the AC/DC adapter until a click sound is heard.
࡙Do not insert only the power plug into the power outlet.
࡙Do not use an AC/DC adapter other than the provided one.
ࣕIt may cause electric shock or fire.
࡙Do not insert the AC/DC adapter into the power outlet on the ceiling.
ࣕIt may cause electric shock or fire.
࡙Rotate the power plug not to exceed the range (0 to 90°) on the AC/DC adapter.
ࣕIt may cause electric shock or fire.
࡙Never diassemble the power plug after being assembled. (It cannot be separated after assembly.)
࡙Never use the provided power plug for other devices.
࡙When removing the AC/DC adapter from the power outlet, hold the body of AC/DC adapter and pull
it up.
ࣕIt may cause electric shock or fire.
࡙Do not drop any objects or apply shock on the AC/DC adapter.
ࣕIt may cause electric shock or fire.
࡙Use the AC/DC adapter after removing its plastic cover.
ࣕOtherwise, this may result fire.
9
࡙Do not hold the product upside-down or move it by holding the stand.
ࣕThe product may fall and become damaged or cause an injury.
࡙Looking at the screen too close for an extended period of time can deteriorate your eyesight.
࡙Do not use humidifiers or stoves around the product.
࡙Rest your eyes for more than 5 minutes or look at distance objects for every 1 hour of product use.
࡙Do not touch the screen when the product has been turned on for an extended period of time as it
will become hot.
࡙Store small accessories out of the reach of children.
࡙Exercise caution when adjusting the product angle.
ࣕYour hand or finger may get stuck and injured.
ࣕTilting the product at an excessive angle may cause the product to fall and an injury may result.
࡙Do not place heavy objects on the product.
ࣕProduct failure or personal injury may result.
࡙When using headphones or earphones, do not turn the volume too high.
ࣕHaving the sound too loud may damage your hearing.
10
Preparations
Chapter 02
Parts
Control Panel
ࣖThe color and shape of parts may differ from what is shown. Speciѣcations are subject to change without
notice to improve quality.
Function Key Guide
JOG Button
DOWN
PRESS(ENTER)
LEFT
Return
Power LED
UP
RIGHT
Icons Description
JOG Button
Multi directional button that helps navigate.
ࣖThe JOG button is located on the rear left side of the product. The
button can be used to move up, down, left or right, or as Enter.
Power LED
This LED is power status indicator and works as
࡙Power On (Power button): Off
࡙Power saving mode: Blinking
࡙Power Off (Power button): On
ࣖThe power Indicator operation can be swapped by changing in the
menu. (System Power LED On) Actual models because of functional
variation maybe haven’t this function.
Function Key Guide
Press the JOG button when the screen is turned on. The Function Key
Guide will appear. To access the onscreen menu when the guide is
displayed, press the corresponding direction button again.
ࣖFunction Key Guide may vary depending on the function or product
model. Please refer to the actual product.
11
Analog mode
Brightness
Auto Adjustment
Features
Eye Saver Mode Off
ࣖAnalog mode option
࡙ / : Adjust Brightness, Contrast, Sharpness.
࡙ : Auto Adjustment.
ࣖChanging the resolution in Display Properties will activate the Auto Adjustment function.
ࣖThis function is only available in Analog mode.
࡙ : Display Function Key Guide.
HDMI mode
Brightness
Volume
Features
Eye Saver Mode Off
ࣖHDMI mode option
࡙ / : Adjust Brightness, Contrast, Sharpness.
࡙ : Adjust Volume, Mute.
࡙ : Display Function Key Guide.
Direct Key guide
ࣖThe shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes.
ࣖThe function buttons page shows if Eye Saver Mode is enabled.
: On
: Off
12
Function Key Guide
ࣖTo enter the main menu or to use other items, press the JOG button to display the Function Key Guide. You can exit by pressing the JOG button again.
Return
UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes.
PRESS(ENTER): The selected item will be applied.
Icons Description
Selects to change the input signal by moving the JOG button in the Function Key Guide screen. A message will appear on the top left corner of the screen if the input signal has
been changed.
Selects by moving the JOG button in the function key guide screen.
The OSD (On Screen Display) of your Monitor’s feature appears.
OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings.
Enable/Disable: To lock/unlock the OSD control, press the LEFT button for 10 seconds when the main menu displayed.
ࣖIf the OSD control is locked, Brightness and Contrast can be adjusted. Eye Saver Mode is available.
System FreeSync, Power LED On is available. Information can be viewed.
Selects by moving the JOG button in the function key guide screen.
Press to enable or disable Eye Saver Mode.
The items below are not available if the Eye Saver Mode function is enable.
࡙Picture Bright, Brightness, Color, Game Mode
࡙System Eco Saving Plus
Selects to turn the Monitor off by moving the JOG button in the function key guide screen.
ࣖActual models because of functional variation, Function key guide options will be different.
13
When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for
control source and power could be used as below.
JOG Button Power saving/Non-signal mode
UP
Source Change
Down
When the monitor displays the Main menu the JOG Button could be used as below.
JOG Button Action
UP/DOWN
Move the option
LEFT
Exit the Main menu.
Close Sublist without saving value.
Value decreases in the slider.
RIGHT
Move to next depth.
Value increases in the slider.
PRESS(ENTER)
Move to next depth.
Save the value and close Sublist.
PRESS(ENTER) for 2 seconds
Power Off
14
Changing Brightness, Contrast and Sharpness settings
You can adjust Brightness, Contrast or Sharpness by moving the JOG button up or down, if no OSD
menu is displayed.
Brightness
Contrast
Sharpness
100
ࣖThe displayed image may differ depending on the model.
Brightness
ࣖThis menu is not available when Bright is set to Dynamic Contrast mode.
ࣖThis menu is not available when Eco Saving Plus is enabled.
ࣖThis menu is not available when Eye Saver Mode is enabled.
Contrast
ࣖThis menu is not available when Bright is in Cinema or Dynamic Contrast mode.
ࣖThis menu is not available when Game Mode is enabled.
Sharpness
ࣖThis menu is not available when Bright is in Cinema or Dynamic Contrast mode.
ࣖThis menu is not available when Game Mode is enabled.
Changing the Volume setting
You can adjust Volume by moving the JOG button left or right, if no OSD menu is displayed.
This function is only available in HDMI mode.
Volume 50
Mute
ࣖThe displayed image may differ depending on the model.
ࣖIf the audio quality of a connected input device is poor, the Auto Mute function on the product may mute
the sound or cause choppy audio when applying the headphones or speakers. Set the input volume for the
input device to at least 20% and control the volume using the volume control (JOG button LEFT/RIGHT) on
the product.
ࣖWhat is Auto Mute?
The function mutes the audio to improve sound effect when there is sound noise or when the input
signal is weak, usually due to a problem with the volume of an input device.
ࣖTo activate the Mute function, access the Volume control screen, then use the JOG button to move the
focus down.
To deactivate the Mute function, access the Volume control screen, then increase or decrease the Volume.
HDMI IN
15
Types of Ports
The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Speci cations are subject to change without notice to improve quality. Refer to the actual
product.
D-SUB IN
Port Description
Connects to a source device using an HDMI cable or HDMI-DVI cable.
Connect to an audio output device such as headphones.
The sound could only be heard when using the HDMI to HDMI cable.
DC 14V
Connects to the AC/DC adapter.
Connect to a PC using the D-SUB cable.
HDMI IN
D-SUB IN
Port Description
Connects to a source device using an HDMI cable or HDMI-DVI cable.
Connect to an audio output device such as headphones.
The sound could only be heard when using the HDMI to HDMI cable.
DC 19V
Connects to the AC/DC adapter.
Connect to a PC using the D-SUB cable.
D-SUB IN 9
D-SUB IN 4
C27R50* C32R50*
16
Adjusting the Product Tilt
ࣖThe color and shape of parts may differ from what is shown. Speciѣcations are subject to change without
notice to improve quality.
-2° (±2°) ~ 22° (±2°)
࡙The monitor tilt can be adjusted.
࡙Hold the lower part of the product and adjust the tilt carefully.
Anti-theft Lock
ࣖAn anti-theft lock allows you to use the product securely even in public places.
ࣖThe locking device shape and locking method depend on the manufacturer. Refer to the user guide
provided with your anti-theft locking device for details.
To lock an anti-theft locking device:
1
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2
Put one end of the cable through the loop on the other end.
3
Insert the locking device into the anti-theft lock slot at the back of the product.
4
Lock the locking device.
ࣕAn anti-theft locking device can be purchased separately.
ࣕRefer to the user guide provided with your anti-theft locking device for details.
ࣕAnti-theft locking devices can be purchased at electronics retailers or online.
17
Precautions for moving the monitor
࡙Do not directly apply pressure on the screen.
࡙Do not hold the screen when moving the
monitor.
࡙Do not hold the product upside down only by
the stand.
࡙Hold the lower corners or edges of the
monitor when moving it.
18
Installing a Wall-mount Kit or Desktop Stand
Power the product off and remove the power cable from the power socket.
1 2
4
5
C
A
Attach the wall-mount kit or desktop stand here.
B
Attach the INLAY to the position as shown in the gure.
C
Bracket (sold separately)
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding
parts on the wall-mount kit or desktop stand you want to attach.
Notes
Using a screw longer than the standard length can damage the internal components of the
product.
The length of screws required for a wall mount that does not comply with the VESA standards
may vary depending on the speci cations.
Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit
or desktop stand using excessive force. The product may get damaged or fall and cause personal
injury. Samsung shall not be held liable for any damage or injury caused by using improper
screws or attaching the wall-mount kit or desktop stand using excessive force.
Samsung shall not be held liable for any product damage or personal injury caused by using a
wall-mount kit other than the one speci ed or from an attempt to install the wall-mount kit on
your own.
To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10
cm or farther away from the wall.
Be sure to use a wall-mount kit that complies with the standards.
To install the monitor using a wall mount, disconnect the stand base from the monitor.
Unit: mm (inches)
Model name VESA screw hole specs (A * B)
in millimeters
Standard Screw Quantity
C27R50*
C32R50* 75.0 x 75.0 (2.95 x 2.95) 4.0 mm , 10.0 mm long 4 EA
Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to
electric shock.
3
19
Installation
Attaching the Stand
5
Check that the stand neck is rmly connected.
- Caution
Do not press down on the monitor. There is a risk
of damaging the monitor.
Fasten the connection part onto the screen
with two screws.
4
Before assembling the product, place the product down on a at and stable surface so that the screen is facing downwards.
a no nehw tcudorp eht no erusserp gnicalP .devruc si tcudorp ehT : at surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
The exterior may differ depending on the product.
3
Tightly fasten the connecting screw at
the bottom of the stand base.
12
Insert the stand neck into the stand base in the
direction shown in the gure.
Hold the main body of the product with your hand
as shown by the gure. Push the assembled stand
into the main body in the direction of the arrow as
shown in the gure.
Place the protective Styrofoam (cushion) included
in the package on the floor and place the product
facing down on the Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick sitting mat.
20
Removing the Stand
1
5
Remove the stand neck from the stand base by
pulling it in the direction of the arrow as shown in
the gure.
Before assembling the product, place the product down on a at and stable surface so that the screen is facing downwards.
a no nehw tcudorp eht no erusserp gnicalP .devruc si tcudorp ehT : at surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
The exterior may differ depending on the product.
- Caution
Do not press down on the monitor. There is a risk
of damaging the monitor.
Removing the Stand.
6
2
Remove the two screws to separate the stand
from the screen.
3
Hold the main body of the product with your hand as
shown in the figure. Remove the assembled stand
from the main body in the direction of the arrow
as shown in the figure.
4
The stand is removed.
Place the protective Styrofoam (cushion) included
in the package on the floor and place the product
facing down on the Styrofoam, as shown in the
image.
If Styrofoam is unavailable, use a thick sitting mat.
21
Connecting and Using a Source Device
Chapter 03
Read below before installing the monitor.
1
Check the shapes of both ends of the cables that came with the monitor, and check the shapes and
positions of the matching ports on the monitor and external devices.
2
Before connecting signal cables, disconnect the power cables for the monitor and external devices
from the power outlet to prevent device damage from a short circuit or overcurrent.
3
After connecting all signal cables, connect the power cables for the monitor and external devices
to the power outlet.
4
Read the user manual to familiarize yourself with the monitor functions, precautions, and proper
use, before using the installed monitor.
Connecting and Using a PC
Select a connection method suitable for your PC.
Connecting parts may differ in different products.
Provided ports may vary depending on the product.
Check to make sure that the power cables for the monitor and external devices, such as
computers and set-top boxes, are not connected to the power outlet.
When connecting an HDMI cable, use the cable that came with the components of the monitor. If you use
an HDMI cable other than provided by Samsung, the image quality may be degraded.
The audio function is not supported if the source device is connected using the HDMI-DVI cable.
The maximum resolution may not be available with an HDMI-DVI cable.
Connection Using the HDMI or HDMI-DVI Cable
HDMI IN
22
Connecting to Headphones
Use headphones when activating sound with an HDMI-HDMI.
The earphone jack supports only the 3 conductor tip-ring-sleeve (TRS) type.
D-SUB IN
Connection Using the D-SUB Cable (Analog Type)
Check to make sure that the power cables for the monitor and external devices, such as
computers and set-top boxes, are not connected to the power outlet.
23
Connecting the Power
2
4
3
1
Optional
Optional
Optional
Optional
1
Connect the power plug to the AC/DC adapter. (Optional)
2
Connect the AC/DC adapter cable to the DC 19V port on the back of the monitor.
3
Plug the AC/DC adapter into the power outlet.
4
Press the JOG button on the back of the monitor to turn it on.
The input voltage is switched automatically.
DC 19V
1
3
2
DC 19V
1
Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the
DC 14V port on the back of the product.
2
Next, connect the power cable to the power outlet.
3
Press the JOG button on the back of the monitor to turn it on.
The input voltage is switched automatically.
1
3
2
1
Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the
2
Next, connect the power cable to the power outlet.
3
Press the JOG button on the back of the monitor to turn it on.
The input voltage is switched automatically.
DC 19V port on the back of the product.
C27R50*
C32R50*
2
4
3
1
1
Connect the power plug to the AC/DC adapter. (Optional)
2
Connect the AC/DC adapter cable to the DC 14V port on the back of the monitor.
3
Plug the AC/DC adapter into the power outlet.
4
Press the JOG button on the back of the monitor to turn it on.
The input voltage is switched automatically.
24
Correct posture to use the product
Use the product in the correct posture as follows:
࡙Straighten your back.
࡙Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at
the screen.
࡙Keep your eyes directly in front of the screen.
࡙Adjust the angle so light does not reflect on the screen.
࡙Keep your forearms perpendicular to your upper arms and level with the back of your hands.
࡙Keep your elbows at about a right angle.
࡙Adjust the height of the product so you can keep your knees bent at 90 degrees or more, your heels
attached to the floor, and your arms lower than your heart.
࡙Do the Eye excercises or blink frequently,then eye fatigue will be relieved.
Driver Installation
ࣖYou can set the optimum resolution and frequency for this product by installing the corresponding drivers.
ࣖTo install the latest version of the product driver, download it from the Samsung Electronics website at
http://www.samsung.com.
Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for
the first time after purchase.
Select a language on the product and change the resolution on your PC to the optimum setting.
ࣖIf the optimum resolution is not selected, the message will appear up to three times for a specified time
even when the product is turned off and on again.
ࣖThe optimum resolution can also be selected in Control Panel on your PC.
25
Screen Setup
Con gure the screen settings such as brightness.
A detailed description of each function is provided. Refer to your product for details.
Chapter 04
SAMSUNG MAGIC Bright
This menu provides an optimum picture quality suitable for the environment where the product will be
used.
This menu is not available when Eco Saving Plus is enabled.
This menu is not available when Game Mode is enabled.
This menu is not available when Eye Saver Mode is enabled.
You can customize the brightness to suit your preferences.
Picture
Brightness
Contrast
Sharpness
C
Eye Saver Mode
olor
HDMI Black Level
Set to an
optimum picture
quality suitable
for the working
environment.
Custom
100
75
60
Off
Return
The displayed image may differ depending on the model.
In PC mode
Custom: Customize the contrast and brightness as required.
Standard: Obtain a picture quality suitable for editing documents or using Internet.
Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content.
Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment.
In AV mode
When the external input is connected through HDMI and PC/AV Mode is set to AV, Bright
has four automatic picture settings (Dynamic, Standard, Movie and Custom) that are preset at the
factory. You can activate either Dynamic, Standard, Movie or Custom. You can select Custom which
automatically recalls your personalized picture settings.
Dynamic: Select this mode to view a sharper image than in Standard mode.
Standard: Select this mode when the surroundings are bright. This also provides a sharp image.
Movie: Select this mode when the surroundings are dark. This will save power and reduce eye
fatigue.
Custom: Select this mode when you want to adjust the image according to your preferences.
26
Brightness
You can adjust the general brightness of the picture. (Range: 0~100)
A higher value will make the picture appear brighter.
ࣖThis menu is not available when Bright is set to Dynamic Contrast mode.
ࣖThis menu is not available when Eco Saving Plus is enabled.
ࣖThis menu is not available when Eye Saver Mode is enabled.
Contrast
Adjust the contrast between the objects and background. (Range: 0~100)
A higher value will increase the contrast to make the object appear clearer.
ࣖThis option is not available when Bright is in Cinema or Dynamic Contrast mode.
ࣖThis menu is not available when Game Mode is enabled.
Sharpness
Make the outline of objects more clear or blurry. (Range: 0~100)
A higher value will make the outline of objects clearer.
ࣖThis option is not available when Bright is in Cinema or Dynamic Contrast mode.
ࣖThis menu is not available when Game Mode is enabled.
Color
Adjust the tint of the screen.
ࣖThis menu is not available when Bright is set to Cinema or Dynamic Contrast mode.
ࣖThis menu is not available when Game Mode is enabled.
ࣖThis menu is not available when Eye Saver Mode is enabled.
࡙Red: Adjust the red saturation level. Values closer to 100 mean greater intensity for the color.
࡙Green: Adjust the green saturation level. Values closer to 100 mean greater intensity for the color.
࡙Blue: Adjust the blue saturation level. Values closer to 100 mean greater intensity for the color.
࡙Color Tone: Select a color tone that best suits your viewing needs.
ࣕCool 2: Set the color temperature to be cooler than Cool 1.
ࣕCool 1: Set the color temperature to be cooler than Normal mode.
ࣕNormal: Display the standard color tone.
ࣕWarm 1: Set the color temperature to be warmer than Normal mode.
ࣕWarm 2: Set the color temperature to be warmer than Warm 1.
ࣕCustom: Customize the color tone.
ࣖWhen the external input is connected through HDMI/VGA and PC/AV Mode is set to AV, Color Tone has
four color temperature settings (Cool, Normal, Warm and Custom).
࡙Gamma: Adjust the middle level of luminance.
ࣕMode1 / Mode2 / Mode3
27
HDMI Black Level
If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/
color degradation, black level, etc.) may occur, depending on the connected source device. In such case,
HDMI Black Level can be used to adjust the image quality.
If this is the case, correct the degraded picture quality using HDMI Black Level.
ࣖThis function is only available in HDMI mode.
࡙Normal: Select this mode when there is no contrast ratio degradation.
࡙Low: Select this mode to reduce the black level and increase the white level when there is a
contrast ratio degradation.
ࣖHDMI Black Level may not be compatible with some source devices.
ࣖThe HDMI Black Level feature is only activated at a certain AV resolution, such as 720P and 1080P.
Eye Saver Mode
Set to an optimum picture quality suitable for eye relaxation.
TÜV Rheinland “Low Blue Light Content” is a certiѣcation for products which meet requirements for
lower blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm
will decrease, and it will provide an optimum picture quality suitable for eye relaxation. At the same
time, the blue light level is lower than in the default settings, and it was tested by TÜV Rheinland and
certiѣed as it met the requirements of TÜV Rheinland “Low Blue Light Content” standards.
Game Mode
Conѣgure the product screen settings for game mode.
Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™
is connected.
ࣖThis menu is not available when Eye Saver Mode is enabled.
ࣖWhen the monitor turns off, enters power-saving mode or changes input sources, Game Mode turns Off
even if it is set to On.
ࣖIf you want to keep Game Mode enabled all the time, select Always On.
Response Time
Accelerate the panel response rate to make video appear more vivid and natural.
ࣖIt is best to set Response Time to Standard or Faster when you are not viewing a movie.
28
Picture Size
Change the picture size.
This option is not available when FreeSync is enabled.
In PC mode
Auto: Display the picture according to the aspect ratio of the input source.
Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
In AV mode
4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
16:9: Display the picture with an aspect ratio of 16:9.
Screen Fit: Display the picture with the original aspect ratio without cutting off.
The function may not be supported depending on the ports provided with the product.
Changing the screen size is available when the following conditions are satis ed.
A digital output device is connected using the HDMI cable.
The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can
support all of these signals.).
This can only be set when the external input is connected through HDMI and PC/AV Mode is set to AV.
Screen Adjustment
This menu is available in Analog mode only.
This menu is only available when Picture Size is set to Screen Fit in AV Mode.
When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally,
select Screen Fit to adjust horizontal position in 0-6 levels.
H-Position & V-Position
H-Position: Move the screen to the left or right.
V-Position: Move the screen up or down.
Configuring
Configuring
Coarse
Adjust the screen frequency.
This menu is available in Analog mode only.
Configuring Fine
Fine-adjust the screen to obtain a vivid picture.
This menu is available in Analog mode only.
29
Adjusting OSD (On Screen Display) settings
A detailed description of each function is provided. Refer to your product for details.
Chapter 05
ࣖThe functions available may vary depending on the product model. The color and shape of parts may differ
from what is shown. Speciѣcations are subject to change without notice to improve quality.
Transparency
Position
Set the transparency for the menu windows.
H-position:Moue the menu position to left or right.
V-position:Moue the menu position up or down.
Language
Set the menu language.
ࣖA change to the language setting will only be applied to the onscreen menu display.
ࣖIt will not be applied to other functions on your PC.
Display Time
Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a speciѣed
period of time.
Display Time can be used to specify the time after which you want the OSD menu to disappear.
30
Setup and Reset
A detailed description of each function is provided. Refer to your product for details.
Chapter 06
―The functions available may vary depending on the product model. The colour and shape of parts may
differ from what is shown. Specifications are subject to change without notice to improve quality.
Self Diagnosis
1
Use the Function Key Guide and go to → System → Self Diagnosis.
Self Diagnosis
FreeSync
Eco Saving Plus
Off Timer
PC/AV Mode
Source Detection
Key Repeat Time
off
Off
Auto
Acceleration
Perform this
test when you
experience a
problem with your
monitor's picture.
Return
2
Select OK when the following screen is prompted.
OK
The test screen will now be shown. Please look carefully at the screen for the next 5 seconds.
•Review the test screen.
System
―The displayed image may differ depending on the model.
31
3
Base on the test result, select Yes / No / Show Again.
Yes No Show Again
Do you still see the same problem on the test screen?
If you need to see the photo again, click Show Again.
•You will see the following screen when you select Yes.
Self Diagnosis Complete
Contact the Samsung Call Center for assistance.
Please have the following information ready:
‐Model Code: **************
‐S/N: **************
OK
•You will see the following screen when you select No.
Self Diagnosis Complete
If the test screen is okay during Self Diagnosis, your monitor may not have a problem. If
the problem persists, follow the steps below:
‐Turn off your monitor and any other connected device, such as a PC. Turn on your monitor
first and then the other connected device.
‐Update the operating system and graphics card driver to the latest version and restart your PC.
‐Connect the other device, such as a PC, to a different input port on your monitor.
‐Reset your monitor by pressing the jog button on the monitor and selecting System > Reset All.
‐Replace the cable with the one enclosed with your monitor.
OK
32
FreeSync
FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency.
This feature will eliminate screen tearing and lag during game play. Improve your gaming experience.
The displayed FreeSync menu items on the monitor may vary, depending on the monitor model and
compatibility with the AMD graphics card.
The sound quality of the monitor may decrease if FreeSync is enabled.
Off: Disable FreeSync.
Standard Engine: Enable the basic FreeSync functions of the AMD graphics card.
Ultimate Engine: Enable the FreeSync feature with a higher screen frame rate. Screen tearing
(abnormal sync between the screen and content) is reduced in this mode. Note that screen
ickering may occur during game play.
Apply the optimum resolution when using FreeSync.
The refresh rate setting method please refer to Q & A How can I change the frequency?
The FreeSync function is only enabled in HDMI mode.
Use the HDMI cable provided by the manufacturer when using FreeSync.
If you use the FreeSync function while playing a game, the following symptoms may occur:
The screen may icker depending on the type of graphics card, the game option settings, or the
video being played. Try the following actions: decrease the game setting values, change the
current FreeSync mode to Standard Engine, or visit the AMD website to check your graphics driver’s
version and update it with the latest one.
While you are using the FreeSync function, the screen may icker due to variation of the output
frequency from the graphics card.
The response rate during the game may uctuate depending on the resolution. A higher resolution
generally decreases the response rate.
The sound quality of the monitor may be degraded.
If you encounter any issues when using the function, contact the Samsung Service Center.
When the resolution is changed while setting FreeSync to Standard Engine or Ultimate Engine, the screen
tearing can happen intermittently. Set FreeSync to Off and change the resolution.
The function is unavailable in the devices (e.g. AV devices) that have no AMD graphic card. If the function is
applied, the screen may have malfunction.
33
The models in the Graphic Cards list supports FreeSync
FreeSync can only be used with speci c AMD graphics card models. Refer to the following list for
supported graphics cards:
Make sure to install the latest of cial graphics drivers from AMD that support FreeSync.
For additional AMD graphics card models that support the FreeSync feature, visit the of cial AMD website.
Select FreeSync Off if you are using a graphics card from a different manufacturer.
When applying the FreeSync function via the HDMI interface, it may fail to work due to the bandwidth
limitation of certain AMD display cards.
AMD Radeon R9 300 Series (Not include
370/370X)
AMD Radeon R9 Fury X
AMD Radeon R7 360
AMD Radeon R9 295X2
AMD Radeon R9 290X
AMD Radeon R9 290
AMD Radeon R9 285
AMD Radeon R7 260X
AMD Radeon R7 260
AMD Radeon RX 400 Series
How do you enable FreeSync?
1
Set FreeSync to Standard Engine or Ultimate Engine in the OSD menu.
2
Enable FreeSync in AMD Radeon Settings:
Right-click the mouse AMD Radeon Settings Display
The "AMD FreeSync" feature should be set to "On". Select to "On" if not already enabled.
34
Eco Saving Plus
The Eco Saving Plus function reduces power consumption by controlling the electric current used by
the monitor panel.
This option is not available when
SAMSUNG
MAGIC
Bright is in Dynamic Contrast mode.
This menu is not available when Game Mode is enabled.
This menu is not available when Eye Saver Mode is enabled.
Off: Deactivate the Eco Saving Plus function.
Auto: The power consumption will automatically be reduced by about 10% over the current setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
Low: The power consumption will be reduced by 25% over the default setting.
High: The power consumption will be reduced by 50% over the default setting.
Off Timer
Configuring Off Timer
Off Timer: Turn on Off Timer mode.
Turn Off After: The off timer can be set within a range of 1 to 23 hours. The product will automatically
power off after the speci ed number of hours.
This option is only available when Off Timer is set to On.
For products for the market in some regions, the Off Timer is set to automatically activate 4 hours after the
product powers on. This is done in accordance with power supply regulations. If you do not want the timer
to activate, go to System Off Timer and set Off Timer to Off.
35
PC/AV Mode
Set PC/AV Mode to AV. The picture size will be enlarged.
This option is useful when you view a movie.
Set to PC when connected to a PC.
Set to AV when connected to an AV device.
Source Detection
Select either Auto or Manual as the method to recognize input signal.
Key Repeat Time
Control the response rate of a button when the button is pressed.
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once
when a button is pressed.
Power LED On
Con gure the settings to enable or disable the power LED located at the lower part of the product.
Working: The power LED is on when the product is turned on.
Stand-by: The power LED is on when the product is turned off.
Reset All
Return all the settings for the product to the default factory settings.
This function does not support Analog mode.
Supplied for the wide models only such as 16:9 or 16:10.
If the monitor is in HDMI mode and the screen says Check Signal Cable or power saving mode
activates, press the JOG button to display the function-button screen and then select the icon. You
can select PC or AV.
36
Information
View the current input source, frequency and resolution.
Picture
OnScreen Display
System
Information
Information
Exit
LC************
S/N:***************
HDMI
**kHz **Hz **
****x****
Optimal Mode
****x**** **Hz
The displayed image may differ depending on the model.
37
Installing the Software
Chapter 07
Easy Setting Box
Easy Setting Box enables users to use the monitor by partitioning multiple sections.
To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at
http://www.samsung.com.
The software may not work properly if you do not restart the computer after the installation.
The Easy Setting Box icon may not appear depending on the computer system and the product
speci cations.
If the shortcut icon does not appear, press the F5 key.
Restrictions and Problems with the Installation
The Easy Setting Box installation may be affected by the Graphics Card, Motherboard and the
Networking Environment.
System Requirements
erawdraHSO
Windows 7 32Bit/64Bit
Windows 8 32Bit/64Bit
Windows 8.1 32Bit/64Bit
Windows 10 32Bit/64Bit
At least 32MB of memory
At least 60MB of free space on the hard disk drive
38
Troubleshooting Guide
Chapter 08
Requirements Before Contacting Samsung
Customer Service Center
Before calling Samsung Customer Service Center, test your product as follows. If the problem persists,
contact Samsung Customer Service Center.
Testing the Product
Check if your product is operating normally by using the product test function.
If the screen is turned off and the power indicator blinks even though the product is properly connected
to a PC, perform a self-diagnosis test.
1
Power off both the PC and product.
2
Disconnect the cables from the product.
3
Power on the product.
4
If the message Check Signal Cable appears, the product is working normally.
If the screen remains blank, check the PC system, video controller and cable.
Checking the Resolution and Frequency
For a mode that exceeds the supported resolution(refer to Standard Signal Mode Table), the message
Not Optimum Mode will appear for a short time.
The displayed resolution may vary, depending on the computer system settings and cables.
Check the following.
Installation issue (PC mode)
The screen keeps switching on and off.
Check the cable connection between the product and PC, and ensure the connectors are locked.
Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected
to the product and PC.
The blank spaces found on the screen have nothing to do with the product.
Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust the
screen size in the HDMI or DVI settings for the graphics card.
If the graphics card settings menu does not have an option to adjust the screen size, update the
graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer for further details about how to adjust
the screen settings.)
Screen issue
The power LED is off. The screen will not switch on.
Check that the power cable is connected properly.
The message Check Signal Cable appears.
Check that the cable is properly connected to the product.
Check that the device connected to the product is powered on.
39
Not Optimum Mode is displayed.
This message appears when the signal from the graphics card exceeds the maximum resolution or
frequency for the product.
Change the maximum resolution and frequency to suit the product performance, referring to
Standard Signal Mode Table (P.42 ).
The images on the screen look distorted.
Check the cable connection to the product.
The screen is not clear. The screen is blurry.
Remove any accessories (video extension cable, etc.) and try again.
Set the resolution and frequency to the recommended level.
The screen appears unstable and shaky. There are shadows or ghost images left on the screen.
Check that the resolution and frequency for the PC are within the range of resolution and frequency
compatible with the product. Next, if required, change the settings, referring to Standard Signal
Mode Table (P.42 ) in this manual and the Information menu on the product.
The screen is too bright. The screen is too dark.
Adjust Brightness and Contrast.
Screen color is inconsistent.
Change the Color settings.
The colors on the screen have a shadow and are distorted.
Change the Color settings.
White does not really look white.
Change the Color settings.
There is no image on the screen and the power LED blinks every 0.5 to 1 second.
The product is operating in power-saving mode.
Press any key on the keyboard or move the mouse to return to normal operating mode.
Text is blurry.
If using a Windows OS (e.g. Windows 7, Windows 8, Windows 8.1 or Windows 10): Go to Control Panel
Fonts Adjust ClearType text and change Turn on ClearType.
Video playback is choppy.
Playback of high-de nition large video les can be choppy. This may be because the video player is
not optimized for the computer resource.
Try playing the le on another video player.
Sound issue
There is no sound.
Check the connection of the audio cable or adjust the volume.
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound
card or software program.
Video is available but there is no sound.
Sound cannot be heard if a HDMI-DVI cable is used to connect the input device.
Connect the device using an HDMI cable.
Source device issue
A beeping sound is heard when my PC is booting.
If a beeping sound is heard when your PC is booting, have your PC serviced.
40
Q & A
Refer to the user manual for your PC or graphics card for further instructions on adjustment.
How can I change the frequency?
Set the frequency on your graphics card.
Windows 7: Go to Control Panel Appearance and Personalization Display Screen Resolution Advanced settings Monitor, and adjust Refresh rate under Monitor settings.
Windows 8(Windows 8.1): Go to Settings Control Panel Appearance and Personalization Display Screen Resolution Advanced settings Monitor, and adjust Refresh rate under Monitor settings.
Windows 10: Go to Settings System Display Advanced display settings Display adapter properties Monitor, and adjust Screen refresh rate under Monitor settings.
How can I change the resolution?
Windows 7: Go to Control Panel Appearance and Personalization Display Adjust Resolution, and adjust the resolution.
Windows 8(Windows 8.1): Go to Settings Control Panel Appearance and Personalization Display Adjust Resolution, and adjust the resolution.
Windows 10: Go to Settings System Display Advanced display settings, and adjust the resolution.
How do I set power-saving mode?
Windows 7: Set power-saving mode in Control Panel Appearance and Personalization Personalize Screen Saver Settings Power options or BIOS SETUP on the PC.
Windows 8(Windows 8.1): Set power-saving mode in Settings Control Panel Appearance and Personalization Personalize Screen Saver Settings Power options or BIOS SETUP on the PC.
Windows 10: Set power-saving mode in Settings Personalization Lock screen Screen timeout settings Power & sleep or BIOS SETUP on the PC.
41
Specifications
Chapter 9
General
Model Name
Size
Display area
Pixel Pitch
Maximum Pixel Clock
Power Supply
AC100-240V~ 50/60Hz
Based on the AC voltage of the adapter. For the DC voltage of the product, refer to the product label.
Signal connectors
D-SUB, HDMI
Environmental conditions Operating
Temperature: 50 °F – 104 °F (10 °C – 40 °C)
Storage
Temperature: -4 °F – 113 °F (-20 °C – 45 °C)
C32R50*
27.5 Inches (H) x 15.5 Inches (V)
0.014321Inches (H) x 0.014321Inches (V)
148.5 MHz (Analog) / 174.5MHz (HDMI)
32 Class (31.5Inches / 80.1cm)
698.4mm (H) x392.85mm (V)
0.36375mm (H) x 0.36375mm (V)
C27R50*
)V( sehcnI 2.31 x )H( sehcnI 5.32
0.012236 Inches (H) x 0.012236 Inches (V)
148.5 MHz (Analog, HDMI)
27 Class (26.9Inches / 68.4cm)
596.736 mm (H) x335.664 mm (V)
0.3108 mm (H) x 0.3108 mm (V)
Humidity: 10 % – 80 %, non-condensing
Humidity: 5 % – 95 %, non-condensing
―Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically.
However, you can customize the installation settings if desired.
―Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel. This does not affect product performance.
―The above specifications are subject to change without notice to improve quality.
―This device is a Class B digital apparatus.
―For detailed device specifications, visit the Samsung Electronics website.
(USA only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, 1-800-SAMSUNG
42
Standard Signal Mode Table
C27R50*
Vertical Frequency
1920 x 1080 @ 60 Hz
Maximum Resolution
1920 x 1080 @ 60 Hz
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank even though the power LED turns on. In such a case, change the settings according to the following table by referring to the graphics card user manual.
VGA/HDMI
30 – 81 kHz
56 – 72 Hz
IBM, 720 x 400
31.469 70.087 28.322 -/+
MAC, 640 x 480
35.000 66.667 30.240 -/-
VESA, 640 x 480
31.469 59.940 25.175 -/-
VESA, 800 x 600
35.156 56.250 36.000 +/+
VESA, 800 x 600
37.879 60.317 40.000 +/+
VESA, 800 x 600
48.077 72.188 50.000 +/+
VESA, 1024 x 768
48.363 60.004 65.000 -/-
VESA, 1024 x 768
56.476 70.069 75.000 -/-
VESA, 1280 x 720
45.000 60.000 74.250 +/+
VESA, 1280 x 800
49.702 59.810 83.500 -/+
VESA, 1280 x 1024
63.981 60.020 108.000 +/+
VESA, 1440 x 900
55.935 59.887 106.500 -/+
VESA, 1600 x 900 RB
60.000 60.000 108.000 +/+
VESA, 1680 x 1050
65.290 59.954 146.250 -/+
VESA, 1920 x 1080
67.500 60.000 148.500 +/+
Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V)
Standard Signal Mode Table
Model Name
Synchronization Horizontal Frequency
Resolution Optimum Resolution
30 – 81 kHz
C32R50*
56 – 75 Hz (D-SUB)
50 – 75 Hz (HDMI)
1920 x 1080 @ 60 Hz (D-SUB)
1920 x 1080 @ 75 Hz (HDMI)
1920 x 1080 @ 60 Hz
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank even though the power LED turns on. In such a case, change the settings according to the following table by referring to the graphics card user manual.
VGA
Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V)
IBM, 720 x 400
31.469 70.087 28.322 -/+
VESA, 640 x 480
31.469 59.940 25.175 -/-
MAC, 640 x 480
35.000 66.667 30.240 -/-
VESA, 640 x 480
37.861 72.809 31.500 -/-
VESA, 640 x 480
37.500 75.000 31.500 -/-
VESA, 800 x 600
35.156 56.250 36.000 +/+
VESA, 800 x 600
37.879 60.317 40.000 +/+
VESA, 800 x 600
48.077 72.188 50.000 +/+
VESA, 800 x 600
46.875 75.000 49.500 +/+
MAC, 832 x 624
49.726 74.551 57.284 -/-
VESA, 1024 x 768
48.363 60.004 65.000 -/-
VESA, 1024 x 768
56.476 70.069 75.000 -/-
VESA, 1024 x 768
60.023 75.029 78.750 +/+
VESA, 1152 x 864
67.500 75.000 108.000 +/+
MAC, 1152 x 870
68.681 75.062 100.000 -/-
VESA, 1280 x 720
45.000 60.000 74.250 +/+
VESA, 1280 x 800
49.702 59.810 83.500 -/+
VESA, 1280 x 1024
63.981 60.020 108.000 +/+
VESA, 1280 x 1024
79.976 75.025 135.000 +/+
VESA, 1440 x 900
55.935 59.887 106.500 -/+
Model Name
Synchronization Horizontal Frequency
Vertical Frequency
Resolution Optimum Resolution
Maximum Resolution
VGA
Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V)
VESA, 1600 x 900
60.000 60.000 108.000 +/+
VESA, 1680 x 1050
65.290 59.954 146.250 -/+
VESA, 1920 x 1080
67.500 60.000 148.500 +/+
83.894 74.973
VESA, 1920 x 1080
IBM, 720 x 400
31.469 70.087 28.322 -/+
VESA, 640 x 480
31.469 59.940 25.175 -/-
MAC, 640 x 480
35.000 66.667 30.240 -/-
VESA, 640 x 480
37.861 72.809 31.500 -/-
VESA, 640 x 480
37.500 75.000 31.500 -/-
VESA, 800 x 600
35.156 56.250 36.000 +/+
VESA, 800 x 600
37.879 60.317 40.000 +/+
VESA, 800 x 600
48.077 72.188 50.000 +/+
VESA, 800 x 600
46.875 75.000 49.500 +/+
MAC, 832 x 624
49.726 74.551 57.284 -/-
VESA, 1024 x 768
48.363 60.004 65.000 -/-
VESA, 1024 x 768
56.476 70.069 75.000 -/-
VESA, 1024 x 768
60.023 75.029 78.750 +/+
VESA, 1152 x 864
67.500 75.000 108.000 +/+
MAC, 1152 x 870
68.681 75.062 100.000 -/-
VESA, 1280 x 720
45.000 60.000 74.250 +/+
VESA, 1280 x 800
49.702 59.810 83.500 -/+
VESA, 1280 x 1024
63.981 60.020 108.000 +/+
VESA, 1280 x 1024
79.976 75.025 135.000 +/+
VESA, 1440 x 900
55.935 59.887 106.500 -/+
VESA, 1600 x 900
60.000 60.000 108.000 +/+
VESA, 1680 x 1050
65.290 59.954 146.250 -/+
VESA, 1920 x 1080
67.500 60.000 148.500 +/+
+/-
HDMI
Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V)
174.500
45
Horizontal Frequency
The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in
kHz.
Vertical Frequency
Repeating the same picture dozens of times per second allows you to view natural pictures. The repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz.
This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the speci ed resolution may degrade the picture quality.
To avoid this, it is recommended that you select the optimum resolution speci ed for your product.
Some resolutions listed in the table above may not be available depending on graphics card speci cations.
46
Appendix
Chapter 10
Responsibility for the Pay Service (Cost to
Customers)
When the service is requested, in spite of in warranty, we may charge you for a visit from a service
technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
If a service technician gives instructions on how to use product or simply adjusts options without
disassembling product.
If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.)
If a product is reinstalled or devices are connected additionally after installing the purchased
product for the rst time.
If a product is reinstalled to move to a different spot or to move to a different house.
If customer requests instructions on how to use because of another company's product.
If customer requests instructions on how to use the network or another company's Program.
If customer requests software installation and setup for the product.
If a service technician removes/cleans dusts or foreign materials inside of the product.
If customer requests an installation additionally after purchasing a product through home-
shopping or online.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
External impact or drop.
Use of supplies or separatly sold product unspeci ed by Samsung.
Repair from a person besides an engineer of outsourcing service company or partner of Samsung
Electronics Co., Ltd.
Remodeling or repairing the product by customer.
Using it with incorrect voltage or non-authorised electrical connections.
Not following the "cautions" in User Manual.
Others
If product fails by natural disaster. (lightning, re, earthquake, ood damage, etc)
If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head, Vibrator,
Lamp, Filter, Ribbon, etc.)
If customer requests a service in case the product has no defect, service fee may be charged. So please
read User Manual rst.