Table of Contents
- Table Of Contents
- Before Using the Product
- Preparations
- Connecting and Using a Source Device
- Screen Adjustment
- Sound Adjustment
- Using the Channel Menu
- System
- Support
- Troubleshooting Guide
- Specifications
- Appendix
- Index
Samsung H40B User Manual
Displayed below is the user manual for H40B by Samsung which is a product in the Signage Displays category. This manual has pages.
Related Manuals
BN46-00281A-01
User Manual
H32B H40B H46B
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
Table Of Contents 2
Table Of Contents
BEFORE USING THE
PRODUCT
7 Copyright
8 Cleaning
8Storage
9 Safety Precautions
9Symbols
10 Electricity and Safety
11 Installation
13 Operation
PREPARATIONS 18 Checking the Contents
18 Removing the Packaging
19 Checking the Components
21 Parts
21 Control Panel
23 Reverse Side
24 Anti-theft Lock
25 Remote Control
28 Before Installing the Product (Installation
Guide)
28 Tilting Angle and Rotation
29 Ventilation
30 Dimensions
31 Installing the Wall Mount
31 Installing the Wall Mount Kit
31 Wall Mount Kit Specifications (VESA)
33 RS232C Connection
33 Cable Connection
CONNECTING AND USING
A SOURCE DEVICE
43 Before Connecting
43 Pre-connection Checkpoints
44 Connecting and Using a PC
44 Connecting to a PC
46 Changing the Resolution
Table Of Contents
Table Of Contents 3
48 Connecting to a Video Device
48 Connection Using the AV Cable
49 Connection Using the Component Cable
50 Connection Using an HDMI Cable
51 Connecting to an Audio System
51 Connecting to an Antenna
52 Changing the Input source
52 Source
SCREEN ADJUSTMENT 53 Picture Mode
53 If the input source is PC
53 If the input source is AV, Component, HDMI or
TV
54 Backlight / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
55 Screen Adjustment
55 Picture Size
57 Position
57 PC Screen Adjustment
58 Auto Adjustment
59 Advanced Settings
59 Dynamic Contrast
59 Black Tone
59 Flesh Tone
60 RGB Only Mode
60 Color Space
60 White Balance
60 Gamma
60 Motion Lighting (Off / On)
Table Of Contents
Table Of Contents 4
61 Picture Options
61 Color Tone
62 Digital Noise Filter
62 MPEG Noise Filter
62 HDMI Black Level
62 Film Mode
62 LED Motion Plus (Off / On)- (H40B, H46B
Model Only)
62 Reset Picture
SOUND ADJUSTMENT 63 Sound Mode
64 Sound Effect
65 Broadcast Audio Options
65 SPDIF Output
66 Speaker Settings
66 Reset Sound
USING THE CHANNEL
MENU
67 Channel
67 Antenna (Air/Cable)
67 Auto Program
69 Clear Scrambled Channel
69 Fine Tune
SYSTEM 70 Setup
71 Time
71 Clock
72 Sleep Timer
72 On Timer
73 Off Timer
74 Menu Language
Table Of Contents
Table Of Contents 5
74 Eco Solution
74 Energy Saving
74 No Signal Power Off
75 Auto Power Off (Off / On)
76 Caption
76 Caption
76 Caption Mode
77 Digital Caption Options
78 Security
78 Program Rating Lock (Off / On)
80 Change PIN
80 PIP
81 Auto Protection Time
82 General
82 Game Mode
82 Penel Lock
82 Boot Logo
83 Anynet+(HDMI-CEC)
83 Anynet+(HDMI-CEC)
84 Auto Turn Off (No / Yes)
85 Receiver
86 DivX® Video On Demand
SUPPORT 87 Self Diagnosis
87 Picture Test (Yes / No)
87 Sound Test (Yes / No)
87 Signal Information
88 Reset
88 Software Update
88 By USB
89 Alternative Software
89 Contact Samsung
Table Of Contents
Table Of Contents 6
89 Contents Home
89 Channel List
90 Media Play
101 Schedule Manager
101 Source
TROUBLESHOOTING
GUIDE
103 Requirements Before Contacting
Samsung Customer Service Center
103 Testing the Product
103 Checking the Resolution and Frequency
104 Check the followings.
107 Q & A
SPECIFICATIONS 109 General
111 PowerSaver
112 Preset Timing Modes
114 License
APPENDIX 115 Contact SAMSUNG WORLDWIDE
116 Responsibility for the Pay Service (Cost
to Customers)
116 Not a product defect
116 A Product damage caused by customer's fault
116 Others
117 Optimum Picture Quality and Afterimage
Burn-in Prevention
117 Optimum Picture Quality
118 Prevention of Afterimage Burn-in
120 Terminology
INDEX
7
Before Using the Product
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2012 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is
prohibited.
The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.
8
Before Using the Product
Before Using the Product
Cleaning
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Storage
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used
nearby.
Contact Customer Service Center if the inside of the product needs cleaning (service fee will be
charged).
1. Power off the product and computer.
2. Disconnect the power cord from the product.
Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
3. Wipe the product with a clean, soft and dry cloth.
zDo not use detergents that contain alcohol, solvent or
surface-active agents.
zDo not spray water or detergent directly on the product.
4. Wet a soft and dry cloth in water and wring thoroughly to clean the exterior
of the product.
5. Connect the power cord to the product when cleaning is finished.
6. Power on the product and computer.
!
9
Before Using the Product
Before Using the Product
Safety Precautions
Symbols
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside. It is dangerous to
make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and
maintenance has been included with this product.
Warning A serious or fatal injury may result if instructions are not followed.
Caution
Personal injury or damage to properties may result if instructions are
not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
10
Before Using the Product
Before Using the Product
Electricity and Safety
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
zAn electric shock or fire may result.
Do not use multiple products with a single power socket.
zOverheated power sockets may cause a fire.
Do not touch the power plug with wet hands. Otherwise, an electric shock may
result.
Insert the power plug all the way in so it is not loose.
zAn unsecure connection may cause a fire.
Connect the power plug to a grounded power socket (type 1 insulated devices
only).
zAn electric shock or injury may result.
Do not bend or pull the power cord with force. Be careful not to leave the power
cord under a heavy object.
zDamage to the cord may result in a fire or electric shock.
Do not place the power cord or product near heat sources.
zA fire or electric shock may result.
Clean any dust around the pins of the power plug or the power socket with a dry
cloth.
zA fire may result.
!
!
!
11
Before Using the Product
Before Using the Product
Caution
Installation
Warning
Do not disconnect the power cord while the product is being used.
zThe product may become damaged by an electric shock.
Only use the power cord provided with your product by Samsung. Do not use the
power cord with other products.
zA fire or electric shock may result.
Keep the power socket where the power cord is connected unobstructed.
zThe power cord must be disconnected to cut off power to the product when
an issue occurs.
zNote that the product is not completely powered down by using only the
power button on the remote.
Hold the plug when disconnecting the power cord from the power socket.
zAn electric shock or fire may result.
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP
OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
zA fire may result.
Have a technician install the wall-mount hanger.
zInstallation by an unqualified person can result in an injury.
zOnly use approved cabinets.
Do not install the product in poorly ventilated spaces such as a bookcase or
closet.
zAn increased internal temperature may cause a fire.
Install the product at least 10cm away from the wall to allow ventilation.
zAn increased internal temperature may cause a fire.
!
!
!
!
!
12
Before Using the Product
Before Using the Product
Keep the plastic packaging out of the reach of children.
zChildren may suffocate.
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.)
zThe product may fall and become damaged and/or cause an injury.
zUsing the product in an area with excess vibration may damage the product
or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water
drips, etc.), oil, or smoke.
zA fire or electric shock may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
zThe product lifespan may be reduced or a fire may result.
Do not install the product within the reach of young children.
zThe product may fall and injure children.
zAs the front is heavy, install the product on a flat and stable surface.
Bend and keep part of the outdoor TV antenna cable hanging downwards (the
part inside the room) to prevent rainwater from entering the product.
zIf rainwater enters the product, a fire or electric shock can occur.
When using an outdoor antenna, be sure to install the antenna away from nearby
power lines to prevent the antenna from collapsing onto them in strong winds.
zA collapsed antenna can cause an electric shock or injury.
Edible oil, such as soybean oil, can damage or deform the product. Do not install
the product in a kitchen or near a kitchen counter.
!
!
!
!
13
Before Using the Product
Before Using the Product
Caution
Operation
Warning
Do not drop the product while moving.
zProduct failure or personal injury may result.
Do not set down the product on its front.
zThe screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom
edge of the front of the product is not protruding.
zThe product may fall and become damaged and/or cause an injury.
zInstall the product only on cabinets or shelves of the right size.
Set down the product gently
zProduct failure or personal injury may result.
Installing the product in an unusual place (a place exposed to a lot of fine
particles, chemical substances or extreme temperatures, or an airport or train
station where the product should operate continuously for an extended period of
time) may seriously affect its performance.
zBe sure to consult Samsung Customer Service Center if you want to install
the product at such a place.
There is a high voltage inside the product. Never disassemble, repair or modify
the product yourself.
zA fire or electric shock may result.
zContact Samsung Customer Service Center for repairs.
Before moving the product, turn off the power switch and disconnect the power
cord, antenna cable and all other connected cables.
zDamage to the cord may result in a fire or electric shock.
!
!
SAMSUNG
!
!
14
Before Using the Product
Before Using the Product
If the product generates abnormal sounds, a burning smell or smoke, disconnect
the power cord immediately and contact Samsung Customer Service Center.
zAn electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
zChildren may become injured or seriously harmed.
If the product is dropped or the outer case is damaged, turn off the power switch
and disconnect the power cord. Then contact Samsung Customer Service
Center.
zContinued use can result in a fire or electric shock.
Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of
the product.
zThe product or heavy objects may fall as children try to reach for the toys or
sweets resulting in a serious injury.
During a lightning or thunderstorm, power off the product and remove the power
cable.
zA fire or electric shock may result.
Do not drop objects on the product or apply impact.
zA fire or electric shock may result.
Do not move the product by pulling the power cord or any cable.
zProduct failure, an electric shock or fire may result from a damaged cable.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate
the area immediately.
zSparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cord or any cable.
zProduct failure, an electric shock or fire may result from a damaged cable.
Do not use or keep combustible spray or an inflammable substance near the
product.
zAn explosion or fire may result.
!
!
!
!
GAS
!
15
Before Using the Product
Before Using the Product
Caution
Ensure the vents are not blocked by tablecloths or curtains.
zAn increased internal temperature may cause a fire.
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that
burn easily (paper, matches, etc) into the product (via the vent or input/output
ports, etc).
zBe sure to power off the product and disconnect the power cord when water
or other foreign substances have entered the product. Then contact
Samsung Customer Service Center.
zProduct failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
zBe sure to power off the product and disconnect the power cord when water
or other foreign substances have entered the product. Then contact
Samsung Customer Service Center.
zProduct failure, an electric shock or fire may result.
Leaving the screen fixed on a stationary image for an extended period of time
may cause afterimage burn-in or defective pixels.
zActivate power-saving mode or a moving-picture screen saver if you will not
be using the product for an extended period of time.
Disconnect the power cord from the power socket if you do not plan on using the
product for an extended period of time (vacation, etc).
zDust accumulation combined with heat can cause a fire, electric shock or
electric leakage.
Use the product at the recommended resolution and frequency.
zYour eyesight may deteriorate.
Do not hold the product upside-down or move it by holding the stand.
zThe product may fall and become damaged or cause an injury.
100
!
!
-_-
!
!
16
Before Using the Product
Before Using the Product
Looking at the screen too close for an extended period of time can deteriorate
your eyesight.
Do not use humidifiers or stoves around the product.
zA fire or electric shock may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
zEye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an extended
period of time as it will become hot.
Store small accessories out of the reach of children.
Exercise caution when adjusting the product angle or stand height.
zYour hand or finger may get stuck and injured.
zTilting the product at an excessive angle may cause the product to fall and
an injury may result.
Do not place heavy objects on the product.
zProduct failure or personal injury may result.
When using headphones or earphones, do not turn the volume too high.
zHaving the sound too loud may damage your hearing.
Be careful that children do not place the battery in their mouths when removed
from the remote control. Place the battery in a location that children or infants
cannot reach.
zIf children have had the battery in their mouths, consult your doctor
immediately.
Use only the specified standardized batteries, and do not use a new battery and
a used battery at the same time.
zOtherwise, the batteries may be damaged or cause fire, personal injury or
damage due to a leakage of the internal liquid.
!
!
!
!
17
Before Using the Product
Before Using the Product
When replacing the battery, insert it with the right polarity (+, -).
zOtherwise, the battery may become damaged or it may cause fire, personal
injury or damage due to leakage of the internal liquid.
The batteries (and rechargeable batteries) are not ordinary refuse and must be
returned for recycling purposes. The customer is responsible for returning the
used or rechargeable batteries for recycling.
zThe customer can return used or rechargeable batteries to a nearby public
recycling center or to a store selling the same type of the battery or
rechargeable battery.
!
!
18
1 Preparations
1 Preparations
1.1 Checking the Contents
1.1.1 Removing the Packaging
1Open the packaging box. Be careful not to damage the product when you open the packaging with
a sharp instrument.
2Remove the styrofoam from the product.
3Check the components and remove the styrofoam and plastic bag.
zThe appearance of actual components may differ from the image shown.
zThis image is for reference only.
4Store the box in a dry area so that it can be used when moving the product in the future.
19
Preparations
1
1 Preparations
1.1.2 Checking the Components
zContact the vendor where you purchased the product if any components are missing.
zThe appearance of the components and items sold separately may differ from the image shown.
Components
Components may differ in different locations.
Quick setup guide
Warranty card
(Not available in some
locations)
User manual
Power cord Remote Control
Batteries
(Not available in some
locations)
Holder wire stand
+
+
-
-
20
Preparations
1
1 Preparations
Items sold separately
The following items can be purchased at your nearest retailer.
Wall-mount KIT HDMI-DVI cable HDMI cable
RCA stereo cable Stereo cable RCA cable
Video cable RS232C stereo cable Optical cable
21
Preparations
1
1 Preparations
1.2 Parts
1.2.1 Control Panel
Panel Key
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Location Description
Power on the product.
If you press the [ ] button when the product is turned on, the control
menu will be displayed.
To exit the OSD menu, press and hold the panel key for at least one
second.
Move to the upper or lower menu. You can also adjust the value of an
option.
In TV mode, you can change the channel by moving the panel key up
or down when the control menu is not displayed.
Move to the left or right menu.
You can adjust the volume by moving the panel key left or right when
the control menu is not displayed.
Remote sensor
To control the remote control in front of the product, lower the remote
control sensor in the direction of the arrow.
POWER
22
Preparations
1
1 Preparations
Control menu
If you press the [ ] button on the panel key (product) when the product is turned on, the control menu
will be displayed.
Location Description
Select the connected input source.
Move the panel key right to select Source [ ] in the control menu.
When the list of input sources is displayed, move the panel key up or
down to select the desired input source. Next, press the panel key.
Display the OSD menu.
Move the panel key left to select menu [ ] in the control menu.
The OSD control screen will appear. Move the panel key right to select
the desired menu. You can select a sub-menu item by moving the panel
key up, down, left, or right. To change settings, select the desired menu
and press the panel key.
Enter Contents Home mode.
Move the panel key up to select Contents Home [ ] in the control
menu.
Power off the product.
Move the panel key down to select Power off [ ] in the control menu.
Next, press the panel key.
Exit the control menu.
Return
CONTENT
CONTENT
CONTENT
23
Preparations
1
1 Preparations
1.2.2 Reverse Side
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Port Description
[COMPONENT / AV IN] Connects to a source device using the AV/component cable.
[RS-232 IN] Connects to a source device using an RS232C cable.
[HDMI IN 1(DVI)] Connects to a source device using an HDMI-DVI cable.
[HDMI IN 2], [HDMI IN 3] Connects to a source device using an HDMI cable.
[DIGITAL AUDIO OUT(OPTICAL)] Connects to a audio device using the optical(digital) cable.
[PC / DVI AUDIO IN] Receives sound from a PC via an audio cable.
[PC IN] Connects to a source device using a D-SUB cable.
[AUDIO OUT] Connects to a audio device using the audio(analog) cable.
[ANT IN] Connect to an antenna cable.
[ (5V 0.5A)] USB memory device port.
[AV IN 2]
Connects to the audio and video output port on a source device
through an AV/RCA cable.
H32B, H40B model only.
3(5V 0.5A)
AV IN 2
POWER
RS-232 IN
24
Preparations
1
1 Preparations
Assembling the Holder-Wire
1.2.3 Anti-theft Lock
zAn anti-theft lock allows you to use the product securely even in public places.
zThe locking device shape and locking method depend on the manufacturer. Refer to the user
guide provided with your anti-theft locking device for details.
To lock an anti-theft locking device
1Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2Put one end of the cable through the loop on the other end.
3Insert the locking device into the anti-theft lock slot at the back of the product.
4Lock the locking device.
zAn anti-theft locking device can be purchased separately.
zRefer to the user guide provided with your anti-theft locking device for details.
zAnti-theft locking devices can be purchased at electronics retailers or online.
25
Preparations
1
1 Preparations
1.2.4 Remote Control
Using other display devices in the same space as the remote control of this product can cause the
other display devices to be inadvertently controlled.
zRemote control button functions may differ for different products.
MEDIA.P SLEEP
Use these buttons in a specific feature.
Use these buttons according to the
directions on screen.
Exit the menu.
Display information on the screen.
Automatically shuts off the product at a
preset time.
Displays the main on-screen menu.
Changes channels.
Cuts off the sound temporarily.
Returns to the previous channel.
Displays and selects the available video
sources.
P.SIZE: Lets you choose the picture
size.
MTS: Press to choose stereo, mono
or Separate Audio Program (SAP
broadcast).
CC: Controls the caption decoder.
Returns to the previous menu.
ENTER
E
and Direction buttons.
Select the on-screen menu items and
change the values seen on the menu.
Quickly select frequently used
functions.
Displays Media Play.
Displays the channel list on the
screen.
Adjusts the volume.
Press to select additional digital
channels being broadcasted by the
same station. For example, to select
channel
‘54-3’, press ‘54’, then press
‘-’ and ‘3’.
Press to access channels directly.
Turns the product on and off.
PRE-CH
MUTE
CH
LIST
P.SIZE MTS CC
26
Preparations
1
1 Preparations
Adjusting the OSD with the Remote Control
To place batteries in the remote control
1. Open the OSD menu.
2. Select from Picture, Sound, Channel, System or Support in the
displayed OSD menu screen.
3. Change settings as desired.
4. Finish setting.
5. Close the onscreen display (OSD) menu.
1
3
2
27
Preparations
1
1 Preparations
Remote Control Reception Range
Use the remote control within 7m to 10m from the sensor on the product at an angle of 30˚ from the left
and right.
zStore used batteries out of reach of children and recycle.
zDo not use a new and used battery together. Replace both batteries at the same time.
zRemove batteries when the remote control is not to be used for an extended period of time.
7m ~ 10m
28
Preparations
1
1 Preparations
1.3 Before Installing the Product (Installation Guide)
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the
installation instructions.
zEnsure that an authorized installation company installs the wall mount.
zOtherwise, it may fall and cause personal injury.
zMake sure to install the specified wall mount.
1.3.1 Tilting Angle and Rotation
Contact Samsung Customer Service Center for further details.
AThe product can be tilted at a maximum angle of 15 from a perpendicular wall surface.
BTo use the product vertically (portrait), turn it clockwise so that the LED is pointing down.
15
29
Preparations
1
1 Preparations
1.3.2 Ventilation
1. Installation on a Perpendicular Wall
2. Installation on an Indented Wall
Contact Samsung Customer Service Center for further details.
When installing the product on an indented wall, allow at least the space specified above between the
product and wall for ventilation and ensure that the ambient temperature is kept below 35 C.
Figure 1.1 Side view
AMinimum 4 cm
BAmbient temperature: Under 35 C
zWhen installing the product on a perpendicular wall, allow
at least 4 cm of space between the product and wall
surface for ventilation and ensure that the ambient
temperature is kept below 35 C.
Figure 1.2 Side view
Figure 1.3 Top view
Plane view
AMinimum 4 cm
BMinimum 7 cm
CMinimum 5 cm
DMinimum 5 cm
EAmbient temperature: Under 35 C
A
B
A
B
C
E
DD
30
Preparations
1
1 Preparations
1.4 Dimensions
Unit: inches (cm)
All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your product. Not responsible for
typographical or printed errors.
23
4
5
6
1
Model name
H32B
7.4
(
18.88
)
3.5 (8.81) 3.8 (9.54
)
19.0 (48.24)
7.9
(
20.00
)
7.9
(
20.00
)
H40B 9.6
(
24.40
)
5.8
(
14.85
)6.3
(
16.00
)
24
.1
(
61.31
)
7.9
(
20.00
)
7.9
(
20.00
)
H46B 11.7
(
29.61
)5.3
(
13.42
)7.8
(
19.79
)29.8
(
75.72
)
15.7
(
40.00
)
15.7
(
40.00
)
1
2
3
4
5
6
31
Preparations
1
1 Preparations
1.5 Installing the Wall Mount
1.5.1 Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the product on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if
you elect to install the wall mount on your own.
1.5.2 Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to
surfaces other than plaster board, please contact your nearest dealer for additional information. If you
install the product on a slanted wall, it may fall and result in severe personal injury.
zStandard dimensions for wall mount kits are shown in the table
below.
zSamsung wall mount kits contain a detailed installation manual
and all parts necessary for assembly are provided.
zDo not use screws that do not comply with the VESA standard
screw specifications.
zDo not use screws that are longer than the standard length or
do not comply with the VESA standard screw specifications.
Screws that are too long may cause damage to the inside of the
product.
zFor wall mounts that do not comply with the VESA standard
screw specifications, the length of the screws may differ
depending on the wall mount specifications.
zDo not fasten the screws too firmly. This may damage the
product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
zSamsung is not liable for product damage or personal injury
when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
zDo not mount the product at more than a 15 degree tilt.
zAlways have two people mount the product on a wall.
32
Preparations
1
1 Preparations
Unit: inches (cm)
Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to
electric shock.
Model name VESA Standard Screw Quantity
H32B H40B 7.9 x 7.9 (20 x 20)
M6
4
H46B 15.7 x 15.7 (40 x 40) M8
33
Preparations
1
1 Preparations
1.6 RS232C Connection
1.6.1 Cable Connection
RS232 Network spec
Pin assignment
Interface RS232C (9 pins)
Pin TxD (No. 2), RxD (No. 3), GND (No. 5)
Bit rate 9600 bps
Data bits 8 bit
Parity None
Stop bit 1 bit
Flow control None
Maximum length 4m (only shielded type)
Pin Signal
1 Detect data carrier
2 Received data
3 Transmitted data
4 Prepare data terminal
5 Signal ground
6 Prepare data set
7 Send request
8 Clear to send
9 Ring indicator
12345
6789
34
Preparations
1
1 Preparations
RS232C cable
Connector: 9-Pin D-Sub to Stereo Cable
Connection
Control Code
zAll communications take place in hexadecimals. The checksum is calculated by adding up all values
except the header. If a checksum adds up to be more than 2 digits as shown below
(11+FF+01+01=112), the first digit is removed.
-P1- -P1- -P2- -P2-
Female
Rx
Tx
Gnd
2
3
5
-------->
<--------
---------
1
2
3
Tx
Rx
Gnd
STEREO
PLUG
(3.5ø)
No. Command type Command Value range
1 Power control 0x11 0~1
2 Input Source Control 0x14 -
3 Contrast Control 0x24 0 ~ 100
4 Brightness Control 0x25 0 ~ 100
5 Manual
Lamp(Backlight)Control
0x58 0 ~ 100
6 CHANNEL UP DOWN 0x61 0 ~ 1
7 VOLUME UP DOWN 0x62 0 ~ 1
1
59
6
-P2-
STEREO PLUG
(3.5ø)
1
2
3
-P1-
RS232C
35
Preparations
1
1 Preparations
E.g. Power On & ID=0
This product doesn't support ID setup. This product uses only zero value for ID.
Power control
zFunction
A product can be powered on and off using a PC.
zViewing power state (Get Power ON / OFF Status)
zSetting power ON/Off (Set Power ON / OFF)
"Power": Power code to be set on a product.
1: Power ON
0: Power OFF
zAck
"Power": Power code to be set on a product.
zNak
"ERR": A code showing what error has occurred.
Header Command
ID
Data length Data 1
Checksum
0xAA 0x11 1 "Power"
Header Command
ID
Data length Data 1
13
0xAA 0x11 1 1
Header Command
ID
Data length
Checksum
0xAA 0x11 0
Header Command
ID
Data length Data
Checksum
0xAA 0x11 1 "Power"
Header
Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 ‘A’ 0x11 "Power"
Header
Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 ‘N’ 0x11 "ERR"
36
Preparations
1
1 Preparations
Input source control
zFunction
The input source of a product can be changed using a PC.
zViewing input source state (Get Input Source Status)
zSetting the input source (Set Input Source)
"Input Source": An input source code to be set on a product.
Note. HDMI1_PC, HDMI2_PC and HDMI3_PC cannot be used with the Set command. They only
respond to "Get" commands.
Header Command
ID
Data length
Checksum
0xAA 0x14 0
Header Command
ID
Data length Data
Checksum
0xAA 0x14 1 "Input
Source"
0x14 PC
0x0C AV(AV1)
0x0D AV2
0x0E Ext. (SCART1)
0x08 Component
0x40 DTV
0x21 HDMI1
0x22 HDMI1_PC
0x23 HDMI2
0x24 HDMI2_PC
0x31 HDMI3
0x32 HDMI3_PC
37
Preparations
1
1 Preparations
zAck
"Input Source": An input source code to be set on a product.
zNak
"ERR": A code showing what error has occurred.
0 : Check Sum Error
1 : Not Supported Command
Header
Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 ‘A’ 0x14 "Input
Source"
Header
Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 ‘N’ 0x14 "ERR"
38
Preparations
1
1 Preparations
Contrast Control
zFunction
The "Contrast" of a product can be changed using a PC.
zGet "Contrast" Status
zSet Contrast
"Contrast": Contrast value code to be set on a product( 0 ~ 100 )
zAck
"Contrast": Contrast value code to be set on a product( 0 ~ 100 )
zNak
"ERR": A code showing what error has occurred.
0 : Check Sum Error
1 : Not Supported Command
Header Command
ID
Data length
Checksum
0xAA 0x24 0
Header Command
ID
Data length Data 1
Checksum
0xAA 0x24 1 "Contrast"
Header
Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 ‘A’ 0x24 "Contrast"
Header
Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 ‘N’ 0x24 "ERR"
39
Preparations
1
1 Preparations
Brightness Control
zFunction
The "Brightness"of a product can be changed using a PC.
zGet "Brightness" Status
zSet Brightness
"Brightness": Brightness value code to be set on a product.( 0 ~ 100 )
zAck
"Brightness": Brightness value code to be set on a product.( 0 ~ 100 )
zNak
"ERR": A code showing what error has occurred.
Header Command
ID
Data length
Checksum
0xAA 0x25 0
Header Command
ID
Data length Data
Checksum
0xAA 0x25 1 "Brightness"
Header
Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 ‘A’ 0x25 "Brightness"
Header
Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 ‘N’ 0x25 "ERR"
40
Preparations
1
1 Preparations
Manual Lamp (Backlight) Control
zFunction
The "Manual Lamp(backlight)"of a product can be changed using a PC.
zGet "LampValue" Status
zSet "LampValue"
"LampValue": Manual Lamp value to be set on a product.(0 ~ 100)
zAck
"LampValue": Manual Lamp value to be set on a product.(0 ~ 100)
zNak
"ERR": A code showing what error has occurred.
0 : Check Sum Error
1 : Not Supported Command
Header Command
ID
Data length
Checksum
0xAA 0x58 0
Header Command
ID
Data length Data
Checksum
0xAA 0x58 1 "LampValue"
Header
Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 ‘A’ 0x58 "LampValue"
Header
Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 ‘N’ 0x58 "ERR"
41
Preparations
1
1 Preparations
Channel Up/Down
zFunction
Personal Computer can control TV Channel.
(If PIP is on and PIP source is TV, it also should work.)
zGet TV Channel Up/Down : N/A
zSet TV "Channel Up/Down"
"Channel Up/Down": Channel UP or Down to be set ona product.(0~1)
0 : Up
1 : Down
zAck
"Channel Up/Down": Channel UP or Down to be set ona product.(0~1)
zNak
"ERR": A code showing what error has occurred.
0 : Check Sum Error
1 : Not Supported Command
Header Command
ID
Data length Data 1
Checksum
0xAA 0x61 1"Channel
Up/Down"
Header
Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 ‘A’ 0x61
"Channel
Up/
Down"
Header
Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 ‘N’ 0x61 "ERR"
42
Preparations
1
1 Preparations
Volume control
zFunction
The volume of a product can be adjusted using a PC.
zViewing volume state (Get Volume Status) : N/A
zSetting the volume (Set Volume)
"Volume": Volume value code to be set on a product. (0 ~ 1)
0 : Up
1 : Down
zAck
"Volume": Volume value code to be set on a product.
zNak
"ERR": A code showing what error has occurred.
0 : Check Sum Error
1 : Not Supported Command
Header Command
ID
Data length Data
Checksum
0xAA 0x62 1 "Volume"
Header
Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 ‘A’ 0x62 "Volume"
Header
Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 ‘N’ 0x62 "ERR"
43
2 Connecting and Using a Source Device
2 Connecting and Using a Source Device
2.1 Before Connecting
Check the following before you connect this product with other devices.
Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and
DVD/Blu-ray Disc players.
2.1.1 Pre-connection Checkpoints
zBefore connecting a source device, read the user manual provided with it. The number and locations
of ports on source devices may differ from device to device.
zDo not connect the power cable until all connections are completed. Connecting the power cable
during connection may damage the product.
zConnect the sound ports correctly: left = white and right = red.
zCheck the types of ports at the back of the product you want to connect.
44
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.2 Connecting and Using a PC
2.2.1 Connecting to a PC
zDo not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
zA PC can be connected to the product in a variety of ways.
Select a connection method suitable for your PC.
Connecting parts may differ in different products.
Connection using the D-SUB cable (analog type)
Connection Using an HDMI-DVI Cable
When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access
video and audio content stored on the PC.
PC IN
PC / DVI
AUDIO IN
HDMI IN 1 (DVI)
PC / DVI
AUDIO IN
45
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
Connection Using an HDMI Cable
HDMI IN (DVI)
46
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.2.2 Changing the Resolution
Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality.
The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
Changing the Resolution on Windows XP
Go to Control Panel Display Settings, and change the resolution.
Changing the Resolution on Windows Vista
Go to Control Panel Personal Settings Display Settings, and change the resolution.
12
3
**** ****
**********
12
34
***********
***********
47
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
Changing the Resolution on Windows 7
Go to Control Panel Display Screen Resolution, and change the resolution.
12
34
48
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.3 Connecting to a Video Device
zDo not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
zYou can connect a video device to the product using a cable.
Connecting parts may differ in different products.
After connecting a source device, press the SOURCE button on the remote control and
select the connected source device.
2.3.1 Connection Using the AV Cable
Rear
Side (H32B, H40B Model Only)
VIDEO
R AUDIO L
VIDEO
R AUDIO L
49
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.3.2 Connection Using the Component Cable
COMPONENT /AV IN
R AUDIO L
50
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.3.3 Connection Using an HDMI Cable
Rear
Side
Using an HDMI cable or HDMI to DVI Cable (up to 1080p)
zFor better picture and audio quality, connect to a digital device using an HDMI cable.
zAn HDMI cable supports digital video and audio signals, and does not require an audio cable.
To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and
audio cables.
zThe picture may not display normally (if at all) or the audio may not work if an external device that
uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the
manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
zBe sure to use an HDMI cable with a thickness of 1.4 cm or less.
zBe sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection
error may occur.
zA basic high-speed HDMI cable or one with ethernet is recommended. This product does not
support the ethernet function via HDMI.
HDMI IN 2
HDMI IN 3
51
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.3.4 Connecting to an Audio System
Using an Audio (Analog) Cable
Using an Optical (Digital) Cable
2.3.5 Connecting to an Antenna
The initial settings process runs automatically when the product is turned on for the first time after
purchase.
Take extra care to ensure the wires inside the cable do not bend.
AUDIO OUT
DIGITAL
AUDIO OUT
(OPTICAL)
ANT IN
VHF/UHF Antenna
52
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.4 Changing the Input source
2.4.1 Source
MENU
[] Support Contents Home Source ENTER
[ ]
Source allows you to select a variety of sources and change source device names.
Source
You can display the screen of a source device connected to the product. Select a source from Source
List to display the screen of the selected source.
Refer to page 101 product for details about the Source menu.
The input source can also be changed by using the SOURCE button on the remote control.
The screen may not display correctly if an incorrect source is selected for the source device you want to
convert to.
The displayed image may differ depending on the model.
m
Contents Home
Channel List Media Play Schedule Manager
Source
nruteR
53
3 Screen Adjustment
3 Screen Adjustment
Configure the Picture settings (Brightness, Color Tone, etc.).
The layout of the Picture menu options may vary depending on the product.
3.1 Picture Mode
MENU
[] Picture Picture Mode ENTER
[ ]
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
Different Picture Mode options are displayed depending on the current input source.
3.1.1 If the input source is PC
zEntertain: Suitable for watching movies and games.
zStandard: Suitable for a normal environment
3.1.2 If the input source is AV, Component, HDMI or TV
zDynamic: This mode is suitable when the ambient light is bright.
zStandard: This mode is generally suitable for any environment.
zNatural: Suitable for reducing eye strain. (H40B, H46B Model Only)
zMovie: This mode reduces eye fatigue.
The displayed image may differ depending on the model.
m
Picture
Picture Mode
· Backlight
· Contrast
· Brightness
· Sharpness
· Color
· Tint (G/R)
Standard
60
100
45
50
50
G 50 R 50
54
Screen Adjustment
3
3 Screen Adjustment
3.2 Backlight / Contrast / Brightness / Sharpness / Color /
Tint (G/R)
MENU
[] Picture ENTER
[ ]
Your monitor has several options for adjusting picture quality. Select an option using the and arrow
keys, and then press [ ]. Use the arrow keys to adjust the option value or select an option setting.
When done, press [ ].
zWhen you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint (G/R),
the OSD will be adjusted accordingly.
zWhen connecting a PC, you can only make changes to Backlight, Contrast, Brightness, and
Sharpness.
zYou can adjust and store Settings for each external device connected to the product.
zLowering picture brightness reduces power consumption.
m
55
Screen Adjustment
3
3 Screen Adjustment
3.3 Screen Adjustment
MENU
[] Picture Screen Adjustment ENTER
[ ]
Screen Adjustment provides various picture size and aspect ratio options. Select an option using the
and arrow keys, and the press [ ]. Use the arrow keys to select an option in the sub-menu, and then
press [ ].
Different Screen Adjustment options are displayed depending on the current input source.
3.3.1 Picture Size
If you have a cable box or satellite receiver, it may have its own set of screen sizes as well. However, we
highly recommend you use your product’s 16:9 mode most of the time.
z16:9: Sets the picture to 16:9 wide mode.
zZoom1: Use for moderate magnification. Cuts off the top and sides.
zZoom2: Use for a stronger magnification.
zSmart View 1: Reduces the 16:9 picture by 50%.
Smart View 1 is enabled only in HDMI mode.
The picture size can vary depending on the input resolution when you play content from
Videos in Media.
zSmart View 2: Reduces the 16:9 picture by 25%.
Smart View 2 is enabled only in HDMI mode.
The picture size can vary depending on the input resolution when you play content from
Videos in Media.
zWide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.
z4:3: Sets the picture to basic (4:3) mode.
The displayed image may differ depending on the model.
m
Screen Adjustment
Picture Size
· Position
PC Screen Adjustment
16:9
56
Screen Adjustment
3
3 Screen Adjustment
Do not set your product to 4:3 format for a long time. The borders displayed on the left and right,
or top and bottom of the screen may cause image retention (screen burn) which is not covered by
the warranty.
zScreen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or
Component (1080i / 1080p) signals are inputted.
zCustom: Changes the resolution to suit the user's preferences.
You can adjust and store settings for each external device you have connected to an input on the
product.
Picture Sizes available by Input Source.
Input Source Picture Size
ATV, AV, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3
DTV (1080i) 16:9, 4:3, Smart View 2, Wide Fit, Screen Fit
Component (1080i, 1080p) 16:9, 4:3, Wide Fit, Screen Fit
HDMI (720p, 1080i, 1080p) 16:9, 4:3, Wide Fit, Screen Fit, Smart View 1,
Smart View 2
PC, HDMI (when a PC is connected) 16:9, 4:3
57
Screen Adjustment
3
3 Screen Adjustment
3.3.2 Position
Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit
or Screen fit.
zTo use the Position function after selecting Zoom1, Zoom2, Wide Fit or Screen fit follow these
steps.
1Press the button to select Position.
2Press the [ ] button.
3Press the or button to move the picture up or down.
4Press the [ ] button.
5Select Close by pressing the and buttons sequentially. To reset the picture position, press
Reset.
zTo use the Position function after selecting Screen Fit in HDMI (1080i/1080p) or Component
(1080i/1080p) or Custom, follow these steps.
1Press the button to select Position.
2Press the [ ] button.
3Press the /// button to move the picture.
4Press the [ ] button.
5Select Close by pressing the and buttons sequentially.
If you want to reset the picture to its original position, select Reset in the Position screen. The
picture will be set to its default position.
3.3.3 PC Screen Adjustment
Available in PC mode only.
Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, use
the Coarse function to adjust the frequency as best as possible (Coarse) and Fine-tune again. After the
noise has been reduced, re-adjust the picture so that it is aligned with the center of screen.
Position: To adjust the PC’s screen position if it is not centered or does not fit the product screen. Press
the or button to adjust the Vertical Position. Press the or button to adjust the Horizontal
Position.
Image Reset: Resets the image to the default settings.
58
Screen Adjustment
3
3 Screen Adjustment
3.4 Auto Adjustment
MENU
[] Picture Auto Adjustment ENTER
[ ]
Adjust frequency values/positions and fine tune the settings automatically.
This option is available when the input source is PC.
m
59
Screen Adjustment
3
3 Screen Adjustment
3.5 Advanced Settings
MENU
[] Picture Advanced Settings ENTER
[ ]
All Advanced Settings are available in the Standard and Movie modes. To use, select an option using
the up and down arrow keys, and then press [ ]. Use the arrow keys to change the value or setting,
and then press [ ].
In PC mode, you can only make changes to Gamma and White Balance.
3.5.1 Dynamic Contrast
Adjust the screen contrast.
zOff / Low / Medium / High
3.5.2 Black Tone
Select the black level to adjust the screen depth.
zOff / Dark / Darker / Darkest
3.5.3 Flesh Tone
Emphasize pink Flesh Tone.
The displayed image may differ depending on the model.
m
Advanced Settings
Dynamic Contrast
Black Tone
Flesh Tone
RGB Only Mode
Color Space
White Balance
Gamma
Off
Off
0
Off
Native
0
60
Screen Adjustment
3
3 Screen Adjustment
3.5.4 RGB Only Mode
Displays the Red, Green and Blue color for making fine adjustments to the hue and saturation.
zOff / Red / Green / Blue
3.5.5 Color Space
Adjusts the range and variety of colors (the color space) available to create images.
zAuto / Native
3.5.6 White Balance
Adjust the color temperature for a more natural picture.
zR-Offset / G-Offset / B-Offset: Adjust each color’s (red, green, blue) darkness.
zR-Gain / G-Gain / B-Gain: Adjust each color’s (red, green, blue) brightness.
zReset: Resets the White Balance to its default settings.
3.5.7 Gamma
Adjust the primary color intensity.
3.5.8 Motion Lighting (Off / On)
Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.
61
Screen Adjustment
3
3 Screen Adjustment
3.6 Picture Options
MENU
[] Picture Picture Options ENTER
[ ]
Select an option using the and arrow keys, and the press [ ]. Use the arrow keys to change the
setting, and then press [ ].
In PC mode, you can only make changes to the Color Tone.
3.6.1 Color Tone
zCool / Standard / Warm1 / Warm2
zWarm1 or Warm2 will be deactivated when the Picture Mode is Dynamic.
zSettings can be adjusted and stored for each external device connected to an input on the
product.
The displayed image may differ depending on the model.
m
Picture Options
Color Tone
Digital Noise Filter
MPEG Noise Filter
HDMI Black Level
Film Mode
LED Motion Plus
Standard
Auto
Auto
Low
Off
Off
62
Screen Adjustment
3
3 Screen Adjustment
3.6.2 Digital Noise Filter
If the broadcast signal received by your product is weak, you can activate the Digital Noise Filter feature
to reduce any static and ghosting that may appear on the screen.
zOff / Low / Medium / High / Auto / Auto Visualization
zAuto Visualization: When changing analog channels, displays signal strength.
Only available for analog channels.
When bar is green, is that the best possible signal.
When the signal is weak, try all the options until the the product displays the best picture.
3.6.3 MPEG Noise Filter
Reduces MPEG noise to provide improved picture quality.
zOff / Low / Medium / High / Auto
3.6.4 HDMI Black Level
Selects the black level on the screen to adjust the screen depth.
zNormal / Low
Available only in HDMI mode.
3.6.5 Film Mode
Sets the product to automatically sense and process film signals from all sources and adjust the picture
for optimum quality.
zOff / Auto1 / Auto2
Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).
3.6.6 LED Motion Plus (Off / On)- (H40B, H46B Model Only)
Removes blur and judder from scenes with large amounts of rapid movement to provide a clearer
picture.
3.7 Reset Picture
MENU
[] Picture Reset Picture ENTER
[ ]
Resets your current picture mode to its default settings.
m
63
4 Sound Adjustment
4 Sound Adjustment
Configure the sound (Sound) settings for the product.
4.1 Sound Mode
MENU
[] Sound Sound Mode ENTER
[ ]
Use the up and down arrow keys to select an option, and then press [ ].
zStandard: Selects the normal sound mode.
zMusic: Emphasizes music over voices.
zMovie: Provides the best sound for movies.
zClear Voice: Emphasizes voices over other sounds.
zAmplify: Increase the intensity of high-frequency sound to allow a better listening experience for the
hearing impaired.
If Speaker Select is set to External, Sound Mode is disabled.
The displayed image may differ depending on the model.
m
Sound
Sound Mode
Sound Effect
Broadcast Audio Options
SPDIF Output
Speaker Settings
Reset Sound
Standard
64
Sound Adjustment
4
4 Sound Adjustment
4.2 Sound Effect
MENU
[] Sound Sound Effect ENTER
[ ]
zIf Speaker Select is set to External, Sound Effect is disabled.
zAvailable only when Sound Mode is set to Standard.
zSRS TruSurround HD (Off / On)
This function provides a virtual 5.1 channel surround sound experience through a pair of speakers
using HRTF(Head Related Transfer Function) technology.
zSRS TruDialog (Off / On)
This function allows you to increase the intensity of a voice over background music or sound effects
so that dialog can be heard more clearly.
zEqualizer
The Equalizer displays a series of sliders. Use the up and down arrow keys to select a slider. Use the
left and right arrow keys to change the slider’s value. To Reset the Equalizer, select Reset and
press [ ], then select Yes and press [ ]. To exit, select Close, and then press [ ].
Equalizer is available in the standard sound mode only.
Balance L/R: Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific
bandwidth frequencies.
Reset: Resets the equalizer to its default settings.
m
65
Sound Adjustment
4
4 Sound Adjustment
4.3 Broadcast Audio Options
MENU
[] Sound Broadcast Audio Options ENTER
[ ]
zPreferred Language
(digital channels only)
Use the up and down arrow keys to select a language, and then press [ ].
Digital-TV broadcasts can simultaneously transmit many audio tracks (for example, simultaneous
translations of the program into foreign languages).
You can only select a language from among the ones being broadcasted.
zMulti-Track Sound
(analog channels only)
Select an option using the up and down arrow keys, and the press [ ].
Mono: Choose for channels that are broadcasting in mono or if you are having difficulty
receiving a stereo signal.
Stereo: Choose for channels that are broadcasting in stereo.
SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-language
translation.
Depending on the program being broadcast, you can listen to Mono, Stereo, or SAP.
4.4 SPDIF Output
MENU
[] Sound SPDIF Output ENTER
[ ]
SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to
speakers and various digital devices such as a DVD player.
zAudio Format: You can select the Digital Audio output (SPDIF) format.
The available Digital Audio output (SPDIF) format may differ depending on the input source.
zAudio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to
digital audio output using an external device such as an AV receiver (0ms ~ 250ms).
m
m
66
Sound Adjustment
4
4 Sound Adjustment
4.5 Speaker Settings
MENU
[] Sound Speaker Settings ENTER
[ ]
zSpeaker Select (External Speaker / TV Speaker)
If you are listening to the sound track of a broadcast or movie through an external receiver, you may
hear a sound echo caused by the difference in decoding speed between the TV’s speakers and the
speakers attached to your audio receiver. If this occurs, set the TV to External Speaker.
When you set Speaker Select to External Speaker, the TV’s speakers are turned off. You
will hear sound through the external speakers only. When the Speaker Select is set to
TV Speaker, both the product speakers and the external speakers are on. You will hear
sound through both.
If there is no video signal, both the TV’s speakers and the external speakers will be mute.
zAuto Volume (Off / Normal / Night)
Normal equalizes the volume level on each channel, so that when you change channels, the volume
level is the same.
Night equalizes and decrease the volume level on each channel, so each channel is quieter. Night is
useful at night, when you may want to keep the volume low.
To use the volume control of a connected source device, set Auto Volume to Off. A change to the
volume control of the connected source device may not be applied if Auto Volume is set to
Normal or Night.
4.6 Reset Sound
MENU [] Sound Reset Sound ENTER
[ ]
Reset all sound settings to the factory defaults. Select Reset Sound, press [ ], select Yes in the pop-
up, and then press [ ] again.
m
m
67
5 Using the Channel Menu
5 Using the Channel Menu
5.1 Channel
MENU
[] Channel ENTER
[ ]
This option is available when the input source is TV.
5.1.1 Antenna (Air/Cable)
MENU [] Channel Antenna ENTER
[ ]
Before your television can begin memorizing the available channels, you must specify the type of signal
source that is connected to the LED display.
zAir / Cable
5.1.2 Auto Program
The Auto Program function memorizes all channels that are available over the air or through your cable
system and adds them to the Channel List.
To start Auto Program, follow these steps:
1Push MENU [] Channel Auto Program ENTER
[ ]
on your remote. The Antenna
Source screen appears.
2On the Antenna Source screen, select the source of your product signal.
zAir: If your product is connected to an antenna choose Air, and then press ENTER
[ ]
. The
product will automatically start memorizing channels.
zCable: If your product is connected to a cable outlet, choose Cable, and then press ENTER
[]
. Go to Step 3.
The displayed image may differ depending on the model.
m
Channel
Antenna
Auto Program
Clear Scrambled Channel
Fine Tune
Cable
m
m
68
Using the Channel Menu
5
5 Using the Channel Menu
3On the Cable Type screen, use the / / / buttons to select the type of digital and analog cable
systems you have: STD, HRC, or IRC. Most systems are STD (Standard). When done, select Start,
and then press ENTER
[ ]
. The product will start memorizing channels.
zChannel memorization can take up to 45 minutes, depending on your cable system.
zMemorized channels are added to the Added Channels list. These are the channels you will
see when you use the Channel buttons on your remote.
69
Using the Channel Menu
5
5 Using the Channel Menu
5.1.3 Clear Scrambled Channel
MENU
[] Media Channel Clear Scrambled Channel ENTER
[ ]
This function filters out scrambled channels after Auto Program is completed. This process may take up
to 20~30 minutes.
How to Stop the Clear Scrambled Channels function
1Press the [ ] button to select Stop.
2Press the [ ] button to select Yes.
3Press the [ ] button.
This function is only available in Cable mode.
5.1.4 Fine Tune
MENU
[] Channel Fine Tune ENTER
[ ]
(analog channels only)
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the
search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the
left or right until the image is clear.
zSettings are applied to the channel you’re currently watching.
zFine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of
the channel number in the channel banner.
zTo reset the fine-tuning, select Reset.
m
m
70
6 System
6 System
6.1 Setup
MENU [] System Setup ENTER
[ ]
Configure the channels and the time when setting up the product for the first time or when resetting the
unit.
The displayed image may differ depending on the model.
m
System
Setup
Time
Menu Language
Eco Solution
Caption
Security
PIP
English
On
Off
71
System
6
6 System
6.2 Time
MENU [] System Time ENTER
[ ]
You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off
at a specified time using the Timer function.
6.2.1 Clock
Set the clock to use the various various timer features of the product.
Changing the Setting for Clock
Clock Mode
zIf you selected Auto: The product will automatically download the correct time from a digital channel.
Select Time Zone, and then press the ENTER
[ ]
button. Use the / buttons to select
your Time Zone, and then press ENTER
[ ]
.
Select DST (Daylight Savings Time), and then press ENTER
[ ]
. Select On if you want to turn
the DST adjustment on and off manually. Select Off to turn off the DST adjustment. Select Auto
if you want the product to adjust to DST automatically. Press ENTER
[ ]
when done.
DST and Time Zone function are only available when the Clock Mode is set to Auto.
zIf you selected Manual: The Clock Set screen appears. Use the / buttons to change the values
in each field or use the number buttons to enter the values directly. Use the / buttons to move
from field to field. When done with all the fields, press ENTER
[ ]
.
Available only when Clock Mode is set to Manual.
Clock Set
Set the Date and Time.
z
Select
Clock Set
. Select
Date
or
Time
, and then press [ ]. Use the number buttons to enter numbers
or press the up and down arrow buttons. Use the left and right arrow buttons to move from one entry
field to the next. Press [ ] when done. To exit
Clock Set
, select
Close
, and then press [ ].
Available only when Clock Mode is set to Manual.
You can set the Date and Time directly by pressing the number buttons on the remote
control.
m
72
System
6
6 System
6.2.2 Sleep Timer
Automatically shuts off the product after a preset period of time. (Off, 30 min., 60 min., 90 min., 120
min., 150 min. and 180 min.)
Use the up and down arrows to select a period of time, and then press [ ]. To cancel Sleep Timer,
select Off.
6.2.3 On Timer
Set On Timer so that your product turns on automatically at a time and on a day of your choosing.
zOn Timer: You can set up three separate On Timer configurations. (On Timer 1, On Timer 2,
On Timer 3)
You must set the clock before you can use On Timer.
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select
Manual, you can choose the days you want On Timer to turn on your product.
The check mark indicates days you’ve selected.
Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to
enter numbers. Use the left and right arrow buttons to change entry fields.
Volume: Set the desired volume level. Use the left and right arrow buttons to change the
volume level.
Source: Select the input source of your choice.
Antenna (when the Source is set to TV): Select Air or Cable.
Channel (when the Source is set to TV): Select the desired channel.
If there is no music file on the USB device or you don’t select a folder containing a music file,
the Timer function does not operate correctly.
If there is only one photo file in the USB, the Slide Show will not play.
If a folder name is too long, the folder cannot be selected.Each USB you use is assigned its
own folder. When using more than one of the same type of USB, make sure the folders
assigned to each USB have different names.
We recommend that you use a USB memory stick and a multi card reader when using
On Timer. The On Timer function may not work with USB devices with a built-in battery, MP3
players, or PMPs made by some manufacturers because the product can take too long to
recognize these devices.
73
System
6
6 System
6.2.4 Off Timer
You can set up three separate Off Timer configurations. (Off Timer 1, Off Timer 2, Off Timer 3)
You must set the clock before you can use Off Timer.
zSetup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select
Manual, you can choose the days you want Off Timer to turn off your product.
The check mark indicates days you’ve selected.
zTime: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter
numbers. Use the left and right arrow buttons to change entry fields.
74
System
6
6 System
6.3 Menu Language
MENU [] System Menu Language ENTER
[ ]
Set the menu language.
A change to the language setting will only be applied to the onscreen menu display. It will not be applied
to other functions on your PC.
6.4 Eco Solution
MENU [] System Eco Solution ENTER
[ ]
6.4.1 Energy Saving
Save power with the Energy Saving feature.
While Energy Saving mode is active, the product power consumption will be controlled to save power.
zOff / Low / Medium / High / Picture Off
6.4.2 No Signal Power Off
To avoid unnecessary energy consumption, you can set how long you want the product to remain on if
it’s not receiving a signal.
zOff / 15 min. / 30 min. / 60 min.
zDisabled when an attached PC is in power saving mode.
zThe default setting is 15 min. for this product.
zThe product will automatically power off at a specified time. The time can be changed as required.
m
The displayed image may differ depending on the model.
m
Eco Solution
Energy Saving
No Signal Power Off
Auto Power Off
Off
15 min.
Off
75
System
6
6 System
6.4.3 Auto Power Off (Off / On)
The product will automatically turn off if you don’t press a button on the remote or touch a button on
product front panel within 4 hours to prevent overheating.
76
System
6
6 System
6.5 Caption
MENU [] System Caption ENTER
[ ]
(On-Screen Text Messages)
6.5.1 Caption
You can switch the caption function on or off. If captions are not available, they will not be displayed on
the screen.
zOff / On
The Caption feature does not work with devices connected to the product through the
Component, HDMI or PC input jacks.
6.5.2 Caption Mode
You can select the desired caption mode.
The availability of captions depends on the program being Broadcasted.
zDefault / CC1~CC4 / Text1~Text4: (analog channels only) The Analog Caption function operates in
either analog product channel mode or when a signal is supplied from an external device to the
product. (Depending on the broadcasting signal, the Analog Caption function may or may not work
with digital channels.)
zDefault / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital channels only) The Digital
Captions function works with digital channels.
Service1~6 may not be available in digital caption mode depending on the broadcast.
m
77
System
6
6 System
6.5.3 Digital Caption Options
(digital channels only) Adjusts the each option. When done, select Close.
zSize: Options include Default, Small, Standard and Large. The default is Standard.
zFont Style: Options include Default and Styles 0 to 7. The default is Style 0.
zFont Color: You can change the color of the letters. Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. The default is White.
zBackground Color: You can change the background color of the caption. Options include Default,
White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. The default is Black.
zFont Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent,
Solid and Flashing.
zBackground Opacity: This adjusts the opacity of the caption background. Options include Default,
Transparent, Translucent, Solid and Flashing.
zReturn to Default: This option sets each Size, Font Style, Font Color, Background Color, Font
Opacity and Background Opacity to their default.
Digital Caption Options are available only when you can select Return to Default and
Service1 ~ Service 6 in Caption mode.
The availability of captions depends on the program being Broadcasted.
The Return to Default setting follows the standards set by the broadcaster.
You cannot set both the Font Opacity and the Background Opacity to the same color.
78
System
6
6 System
6.6 Security
MENU [] System Security ENTER
[ ]
Every time you access the Security functions, the PIN screen will appear and the default PIN number is
“0-0-0-0". The PIN screen closes and the Security menu appears.
6.6.1 Program Rating Lock (Off / On)
When turned on, the Program Rating Lock feature can automatically block programs that you deem
inappropriate for your children. You must enter a PIN (personal identification number) before you can set
or change any of the Program Rating Lock restrictions.
zProgram Rating Lock is not available in HDMI, Component or PC mode.
zThe default PIN number for a new product set is “0-0-0-0”.
zTV Rating: You can block TV programs based on their ratings. This function allows you to control
what your children can watch. TV Rating displays a grid with locks. The following categories are on
the left side.
TV-Y: Young children / TV-Y7: Children 7 and over / TV-G: General audience / TV-PG: Parental
guidance / TV-14: Viewers 14 and over / TV-MA: Mature audience
The following categories are on top
zALL: Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation / L: Adult
Language / D: Sexually Suggestive Dialog
zTo block certain content, you select a lock, and press [ ] (That is, you “click it”.). For example,
click the lock at the intersection of V and TV-MA, and you block all programs that are rated violent
and for mature adults. The locks are also assigned to related groups. For example, if you click
TV-Y under All, then TV-Y7 will also automatically be blocked. Similarly, if you click TV-G under
ALL, then all the categories in the young adult group will be blocked (TV-G, TV-PG, TV-14 and
TV-MA). The sub-ratings (D, L, S, V) work similarly. So, if you block the L sub-rating in TV-PG,
then the L sub-ratings in TV-14 and TV-MA will automatically be blocked.
zTo unblock a category, click the lock. To unblock all the categories in a row, click the lock under
ALL.
The displayed image may differ depending on the model.
m
Security
Off
On
Program Rating Lock
Change PIN
79
System
6
6 System
zTo watch a blocked program, you must enter the Security code when requested.
zMovie Rating (MPAA): You can block movies based on their MPAA rating. The Motion Picture
Association of America (MPAA) has implemented a rating system that provides parents or guardians
with advanced information on which films are appropriate for children.
Movie Rating displays a column with locks and the following ratings categories.
G: General audience (no restrictions). / PG: Parental guidance suggested. / PG-13: Parents strongly
cautioned. / R: Restricted. Children under 17 should be accompanied by an adult. / NC-17: No
children under age 17. / X: Adults only. / NR: Not rated.
To block certain content, you select a lock, and press [ ] (That is, you “click it”.). For
example, click the X lock and you block all X-rated movies. The rating categories are also
grouped so that clicking one category blocks all the categories a parent would block along
with it. For example, if you block the PG-13 category, then R, NC-17 and X will automatically
be blocked also.
To unblock a category, click the lock.
zCanadian English Rating: You can block TV programs based on their Anglophone Canadian rating.
Canadian English Rating displays a column with locks and the following ratings categories.
C: Programming intended for children under age 8. / C8+: Programming generally considered
acceptable for children 8 years and over to watch on their own. / G: General programming, suitable
for all audiences. / PG: Parental Guidance. / 14+: Programming contains themes or content which
may not be suitable for viewers under the age of 14. / 18+: Adult programming.
To block certain content, you select a lock, and press [ ] (That is, you “click it”.). For
example, click the 18+ lock and you block all TV programs rated 18+. The rating categories
are also grouped so that clicking one category blocks all the categories a parent would block
along with it. For example, if you block the G category, then PG, 14+ and 18+ will
automatically be blocked.
To unblock a category, click the lock.
zCanadian French Rating: You can block TV programs based on their French Canadian rating.
Canadian French Rating displays a column with locks and the following ratings categories.
G: General / 8 ans+: Programming generally considered acceptable for children 8 years and over to
watch on their own. / 13 ans+: Programming may not be suitable for children under the age of 13. /
16 ans+: Programming is not suitable for children under the age of 16. / 18 ans+: Programming
restricted to adults.
To block certain content, you select a lock, and press [ ] (That is, you “click it”.). For
example, click the 18 ans+ lock and you block all TV programs rated 18 ans+. The rating
categories are also grouped so that clicking one category blocks all the categories a parent
would block along with it. For example, if you block the 8 ans+ category, then 13 ans+,
16 ans+ and 18 ans+ will automatically be blocked also.
To unblock a category, click the lock.
zDownloadable U.S. Rating: Parental restriction information you can use while watching DTV
channels.
80
System
6
6 System
If information is not downloaded from the broadcasting station, Downloadable U.S. Rating
menu is deactivated.
Parental restriction information is automatically downloaded while you watch DTV channels. It
may take several seconds.
The Downloadable U.S. Rating menu is available for use after information is downloaded
from the broadcasting station. However, depending on the information from the broadcasting
station, it may not be available for use.
Parental restriction levels differ depending on the broadcasting station. The default menu
name and Downloadable U.S. Ratings change depending on the downloaded information.
Even if you set the on-screen display to another language, the Downloadable U.S. Rating
menu will appear in English only.
Blocking one rating level will automatically block other categories that deal with more sensitive
material.
The rating titles (For example: Humor Level..etc) and TV ratings (For example: DH, MH, H..etc)
may differ depending on the broadcasting station.
6.6.2 Change PIN
The Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN. Re-
enter the same 4 digits in Confirm New PIN. When the Confirm screen disappears, press the Close
button. The product has memorized your new PIN.
6.7 PIP
MENU [] System PIP ENTER
[ ]
z
For PIP sound, refer to the
Sound Select
instructions.
z
If you turn the product off while watching in the PIP mode, the PIP function is reset to off. When you turn
your product on, you must turn PIP on again to watch in the PIP mode.
z
You may notice that the picture in the PIP screen becomes slightly unnatural when you use the main
screen to view a game or karaoke.
z
While
Program Rating Lock
is on, you cannot use PIP.
zPIP Settings
The picture from the external video source will be in the main screen and the picture from the
product tuner will be in the PIP sub-picture screen.
PIP (Off / On): Activate or deactivate the PIP function.
Main picture Sub picture
PC, Component, HDMI TV
m
81
System
6
6 System
Channel: Select the channel for the sub-screen.
This option is enabled if the secondary display is set to TV.
Size ( , ): Select a size for the subpicture.
Position ( , , , ): Select a position for the sub-picture.
Sound Select (Main / Sub): You can choose to listen to the sound from the Main picture or the
Sub picture.
6.8 Auto Protection Time
MENU [ System Auto Protection Time ENTER
[ ]
If the screen displays a still image for a certain period of time you define, the product activates the screen
saver to prevent the formation of burnt in ghost images on the screen.
zOff / 2 hours / 4 hours / 8 hours / 10 hours
m
82
System
6
6 System
6.9 General
MENU [] System General ENTER
[ ]
6.9.1 Game Mode
When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic
gaming experience by selecting game mode.
zPrecautions and limitations for game mode
To disconnect the game console and connect another external device, set Game Mode to
Off in the setup menu.
If you display the TV menu in Game Mode, the screen shakes slightly.
zGame Mode is not available when the input source is set to TV or PC.
zAfter connecting the game console, set Game Mode to On. Unfortunately, you may notice
reduced picture quality.
zIf Game Mode is On
- Picture mode is set to Standard and Sound mode is set to Movie.
6.9.2 Penel Lock
Lock or unlock all the keys on the panel.
6.9.3 Boot Logo
Display Samsung logo when the Product is turned on.
The displayed image may differ depending on the model.
m
General
Game Mode
Panel Lock
Boot Logo
Off
Off
On
83
System
6
6 System
6.10 Anynet+(HDMI-CEC)
MENU [] System Anynet+(HDMI-CEC) ENTER
[ ]
6.10.1 Anynet+(HDMI-CEC)
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+
with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that
have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+
logo on it.
zYou can only control Anynet+ devices using the product remote control, not the buttons on the
product.
zThe product remote control may not work under certain conditions. If this occurs, reselect the
Anynet+ device.
zThe Anynet+ functions do not operate with other manufacturers’ products.
zFor instructions explaining how to connect Anynet+ external devices, refer to the device’s user
manual You must connect an Anynet+ device using an HDMI cable. Some HDMI cables may not
support Anynet+ functions.
zAnynet+ works when the AV device supporting Anynet+ is in the standby or on status.
zWhile in PIP mode, Anynet+ functions only when an AV device is connected as the primary display.
It does not work if the AV device is connected as a secondary display.
zAnynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the
same type.
zHowever, you can connect only one Anynet+ Home Theater. To connect an Anynet+ Home
Theate, connect the Home Theater to the product using an HDMI cable then.
m
84
System
6
6 System
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the
product.
6.10.2 Auto Turn Off (No / Yes)
Setting an Anynet+ Device to turn Off automatically when the product is turned off.
zIf Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product
powers off.
zMay not be enabled depending on the device.
Switching between Anynet+ Devices
1Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press [ ].
2Select Device List, and then press the [ ] button.
If you cannot find a device you want, select Refresh to refresh the list.
3Select a device, and then press the [ ] button. You can switch to the selected device.
The Device List menu appears only when you set Anynet+ (HDMI-CEC) to On in the System
menu.
zSwitching to the selected device may take up to 2 minutes. You cannot cancel the switching
operation while switching is in progress.
Anynet+ Menu Description
View PC Changes Anynet+ mode to PC mode.
Device List Shows the Anynet+ device list.
(device_name) MENU Shows the menu of the connected device menus. E.g. if a DVD player is
connected, the disc menu of the DVD player will appear.
(device_name) Tools Shows the tools menu of the connected device. E.g. if a DVD player is
connected, the tools menu of the DVD player will appear.
Depending on the device, this menu may not be available.
(device_name) Title Menu Shows the title menu of the disc in the connected device. E.g. If a DVD
player is connected, the title menu of the movie in the DVD player will
appear.
Depending on the device, this menu may not be available.
Receiver Sound is played through the Receiver.
85
System
6
6 System
zIf you have selected an Anynet+ device by pressing the SOURCE button and then selecting
its input source, you cannot use the Anynet+ function. Make sure to switch to an Anynet+
device by using the Device List.
6.10.3 Receiver
You can listen to sound through a Receiver (i.e. Home Theater) instead of the product Speaker.
To listen to sound through a receiver, go to Receiver screen (System Anynet+ (HDMI-CEC)
Receiver). Then select Receiver and set to On.
If your Receiver supports audio only, it may not appear in the device list.
Troubleshooting for Anynet+
Problem Possible Solution
Anynet+ does not work. zCheck if the device is an Anynet+ device. The Anynet+ system
supports Anynet+ devices only.
zYou can connect only one receiver (home theater).
zCheck if the Anynet+ device power cord is properly connected.
zCheck the Anynet+ device’s Video/Audio/HDMI cable
connections.
zCheck whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
zCheck whether the remote control is Anynet+ compatible.
zAnynet+ doesn’t work in certain situations. (Searching channels,
operating Plug & Play (initial setup), etc.)
zIf you have removed and then reconnected the HDMI cable,
please make sure to search devices again or turn your product off
and on again.
zCheck if the Anynet+ function of the Anynet device is set on.
I want to start Anynet+. zCheck if the Anynet+ device is properly connected to the product
and check if the Anynet+ (HDMI-CEC) is set to On in the
Anynet+ Setup menu.
zPress the TOOLS button to display the Anynet+ menu and select
a menu you want.
I want to exit Anynet+. zSelect View PC in the Anynet+ menu.
zPress the SOURCE button on the product remote control and
select a non- Anynet+ device.
86
System
6
6 System
6.11 DivX® Video On Demand
MENU [] System DivX® Video On Demand ENTER
[ ]
Shows the registration code authorized for the product. If you connect to the DivX web site and register
using that code, you can download the VOD registration file.
For more information about DivX® VOD, visit “http://vod.divx.com”.
The message “Connecting to
Anynet+ device...” appears on
the screen.
zYou cannot use the remote control when you are configuring
Anynet+ or switching to a view mode.
zUse the remote control after the product has completed Anynet+
configuration or has finished switching to Anynet+.
The Anynet+ device does not
play.
zYou cannot use the play function when Plug & Play (initial setup)
is in progress.
The connected device is not
displayed.
zCheck whether or not the device supports Anynet+ functions.
zCheck whether or not the HDMI cable is properly connected.
zCheck whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
zSearch Anynet+ devices again.
zAnynet+ requires an HDMI connection. Make sure the device is
connected to your product with an HDMI cable.
zSome HDMI cables may not support Anynet+ functions.
zIf the connection is terminated because there has been a power
failure or the HDMI cable has been disconnected, please repeat
the device scan.
Problem Possible Solution
m
87
Support
Support
7.1 Self Diagnosis
Self Diagnosis might take few seconds, this is part of the normal operation of the LED display
7.1.1 Picture Test (Yes / No)
Picture Test: Use to check for picture problems.
zYes: If the test pattern does not appear or there is noise in the test pattern, select Yes. There may
be a problem with the LED display. Contact Samsung’s Call Center for assistance.
zNo: If the test pattern is properly displayed, select No. There may be a problem with your external
equipment. Please check your connections. If the problem persists, refer to the external device’s
user manual.
7.1.2 Sound Test (Yes / No)
Sound Test: Use the built-in melody sound to check for sound problems.
zYes: If you can hear sound only from one speaker or not at all during the sound test, select Yes.
There may be a problem with the LED display. Contact Samsung’s Call Center for assistance.
zNo: If you can hear sound from the speakers, select No. There may be a problem with your external
equipment. Please check your connections. If the problem persists, refer to the external device’s
user manual.
7.1.3 Signal Information
Signal Information: (digital channels only) An HD channel’s reception quality is either perfect or the
channels are unavailable. Adjust your antenna to increase signal strength.
The displayed image may differ depending on the model.
Support
Self Diagnosis
Software Update
Contact Samsung
Contents Home
88
Support
Support
7.1.4 Reset
Reset: Restores all settings to factory defaults except network settings.
7.2 Software Update
MENU [] Support Software Update ENTER
[ ]
The Software Update menu lets you upgrade your TV’s software to the latest version.
zCurrent Version: This is the software version already installed in the TV.
Be careful not to turn off the power until the upgrade is complete. The TV will turn off and on
automatically after completing the software upgrade. When you upgrade software, all video and audio
settings you have made will return to their default settings. We advise you to write down your settings
so that you can easily reset them after the upgrade.
7.2.1 By USB
To upgrade by USB, follow these steps.
1Visit www.samsung.com.
2Download the latest USB software upgrade exe archive to your computer.
3Extracts the exe archive to your computer. You should have a single folder with the same name as
the exe file.
4Copy the folder to a USB flash drive.
5Turn on the TV, and then insert the USB flash drive into the USB port of the TV.
6In the TV’s menu, go to Support Software Update.
7Select By USB.
Please be careful not to remove the USB drive until the upgrade is complete.
m
89
Support
Support
7.2.2 Alternative Software
zAlternative Software
The Alternative Software option lets you upgrade using a file the TV downloaded earlier, but you
decided not to install immediately, or a file downloaded by the TV in Standby Mode.
To upgrade By Alternative Software, follow these steps.
1If upgrade software has been downloaded, you will see the software version number to the right of
Alternative Software.
2Select Alternative Software, and then press the [ ] button.
3The TV displays a message asking if you want to upgrade. Select Yes. The TV begins the upgrade.
4When the upgrade is complete, the TV turns off automatically, and then turns on.
7.3 Contact Samsung
MENU [] Support Contact Samsung ENTER
[]
View this information when your TV does not work properly or when you want to upgrade the software.
You can find information regarding our call centers and how to download products and software.
7.4 Contents Home
MENU
[] Support Contents Home ENTER
[ ]
You can enjoy useful and various contents.
7.4.1 Channel List
You can view all the channel searched.
When you press the CH LIST button on the remote control, Channel List screen will be displayed at
once.
m
m
90
Support
Support
Using the operation buttons with the Channel List.
Tools
Press Tools button to check the following functions.
zProgram View:Press the / buttons to select the desired Program, then press the ENTER
[ ]
button. (Only for DIGITAL Channel)
zEdit Favorites: Set channels you watch frequently as Favorites.
Select the Edit Favorites, then press the ENTER
[ ]
button.
If the channel is already added to Favorite channel, Edit Favorites will be shown.
zChannel Name Edit (Only for Analog channels): Assign your own channel name.
This function may not support depending on the region.
zDelete: You can delete a channel to display the channels you want.
zInformation: Display the channel name, resolution, picture mode, language and so on.(Some just
available for DTV)
zChange Antenna: Switches to Air or Cable.
zEdit Mode: You can select desired channels and edit it.
Watch
Watches the channel you select. / Displays details of the selected Program.
7.4.2 Media Play
Enjoy videos, photos, music files saved on a USB Mass Storage Class (MSC) device.
The displayed image may differ depending on the model.
Channel List
Added Ch.
1 1futech
2 24ore.tv
3 BBC World
4 Class News
5 Coming Soon
6R4 DTT
No Information
1C2
2C4
Tools Watch Page
91
Support
Support
Connecting a USB Device
1Turn on your Product.
2Connect a USB device containing photo and music files to the USB jack on the side of the Product.
3When USB is connected to the Product, popup window appears. Then you can select New Device
connected..
zIt might not work properly with unlicenced multimedia files.
zNeed-to-Know List before using Media Play.
zMTP (Media Transfer Protocol) is not supported.
zThe file system supports FAT16, FAT32 and NTFS.
zCertain types of USB Digital camera and audio devices may not be compatible with this
product.
zMedia Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage
Class Bulk-Only Transport device. Examples of MSC are Thumb drives, Flash Card Readers
and USB HDD (USB HUB are not supported). Devices should be connected directly to the
Product USB port.
zUSB (HDD) is not supported.
zBefore connecting your device to the product, please back up your files to prevent them from
damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.
zDo not disconnect the USB device while it is loading.
zThe higher the resolution of the image, the longer it takes to display on the screen.
zThe maximum supported JPEG resolution is 15360 x 8640 pixels.
zFor unsupported or corrupted files, the “Not Supported File Format” message is displayed.
zMP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital
Rights Management (DRM) is a technology that supports the creation, distribution and
management of the content in an integrated and comprehensive way, including the protection
The displayed image may differ depending on the model.
Media Play / Videos /
USB
There is no device connected.
Videos
Photos
Music
Return
92
Support
Support
of the rights and interests of the content providers, the prevention of the illegal copying of
contents, as well as managing billings and settlements.
zA USB device that requires high power (more than 500mA or 5V) may not be supported.
zIf an over-power warning message is displayed while you are connecting or using a USB device,
the device may not be recognized or may malfunction.
zIf the product has been no input during time set in Auto Protection Time, the Screensaver will
run.
zThe power-saving mode of some external hard disk drives may be released automatically when
connected to the product.
zIf a USB extension cable is used, the USB device may not be recognized or the files on the
device may not be read.
zIf a USB device connected to the product is not recognized, the list of files on the device is
corrupted or a file in the list is not played, connect the USB device to the PC, format the device
and check the connection.
zMedia Play only supports sequential jpeg format.
Screen Display
Move to the desired file using the / / / buttons and then press the ENTER
[ ]
button. The file is
played. Media Play screen may differ depending on the way to enter the screen.
Information:
You can ascertain the
selected device name,
contents mode, folder/file
name, page.
Information:
You can ascertain the
name, size and created
date of the selected file.
Operation Buttons:
- E Play: Plays the selected file.
- T Tools: Displays the option menu.
- R Return: Move to the previous step.
- /GPage Move: Move to up or down page.
File List Section:
You can confirm the
files and groups that are
sorted by category.
Media Play
/ Videos / SUM / 500 Days of... .avi 1/15
πμ Page Move E Play T Tools R Return
B C
93
Support
Support
Videos
Playing Video
1Press the /// button to select the desired video in the file list.
2Press the ENTER
[ ]
button or (Play) button.
zThe selected file name is displayed on the top with its playing time.
zIf video time information is unknown, play time and progress bar are not displayed.
zDuring video playback, you can search using and button.
zYou can use (REW) and (FF) buttons during playback.
In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself.
The displayed image may differ depending on the model.
94
Support
Support
Supported Subtitle Formats
External
Internal
Name File extension
MPEG-4 Timed text .ttxt
SAMI .smi
SubRip .srt
SubViewer .sub
Micro DVD .sub or .txt
SubStation Alpha .ssa
Advanced SubStation Alpha .ass
Powerdivx .psb
Name Container Format
Xsub AVI Picture Format
SubStation Alpha MKV Text Format
Advanced SubStation Alpha MKV Text Format
SubRip MKV Text Format
MPEG-4 Timed text MP4 Text Format
95
Support
Support
Supported Video Formats
File
Extension Container Video Codec Resolution
Frame
rate
(fps)
Bit rate
(Mbps) Audio Codec
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.flv
*.vob
*.svi
*.m2ts
*.mts
*.divx
AVI
MKV
ASF
MP4
3GP
VRO
VOB
PS
TS
DivX 3.11/4.x/
5.x/6.x
1920 x 1080
6~30
30
AC3
LPCM
ADPCM
(IMA, MS)
AAC
HE-AAC
WMA
DD+
MPEG
(MP3)
DTS Core
G.711(A-Law,
μ-Law)
MPEG4 SP /
ASP
H.264 BP / MP /
HP
Motion JPEG 640 x 480 8
Window Media
Video v9
1920 x 1080 30
MPEG2
MPEG1
96
Support
Support
Other Restrictions
zVideo content will not play, or not play correctly, if there is an error in the content or the container.
zSound or video may not work if the contents have a standard bit rate/frame rate above the
compatible Frame/sec listed in the table.
zIf the Index Table is in error, the Seek (Jump) function is not supported.
zThe menu can be displayed late if the video is over 10Mbps(bit rate).
zSome USB/digital camera devices may not be compatible with the player.
Video Decoder Audio Decoder
zSupports up to H.264, Level 4.1
zH.264 FMO / ASO / RS, VC1 SP / MP /
AP L4 and AVCHD are not supported.
zGMC is not supported.
zWMA 10 Pro supports up to 5.1 channel
and M2 profile. (LBR mode of M0 is not
supported)
zWMA lossless audio is not supported.
97
Support
Support
Photos
Viewing a Photo (or Slide Show)
1Press the /// button to select the desired photo in the file list.
2Press the ENTER
[ ]
button.
zDuring the slide show, all files in the file list will be displayed in order.
zWhen you press the (Play) button in the file list, slide show will be started immediately.
zDuring the slide show, you can adjust the slide show speed using (REW) or (FF) button.
zYou can move to other file using or button.
Music files can be automatically played during the slide show if the Background Music On is set.
Supported Picture Formats
The displayed image may differ depending on the model.
File Extension Format Resolution
*.jpg JPEG 15360 x 8640
*.bmp BMP 1920 x 1080
*.mpo MPO 15360 x 8640
0801181247070.JPG
1.Jan.2012
663.0KB
1920 x 1080
Media Play / Photos / Cruzer... / Photos / 0801181... .JPG
7 / 1000
Upper Folder
Outils
Play Retour
R
98
Support
Support
Music
Playing Music
1Press the /// button to select the desired Music in the file list.
2Press the ENTER
[ ]
button.
zOnly displays the files with the file extension in following supported music formats list. Other file
extensions are not displayed, even if they are saved on the same USB device.
zIf the sound is abnormal when playing MP3 files, adjust the Equaliser in the Sound menu. (An
over-modulated MP3 file may cause a sound problem.)
Using the playback menu
- Press the / button to select the desired menu.
zPlay / Pause: You can start or stop a music. Alternatively, the or button on the
remote.
zRepeat Mode (Off / One Song / All): You can play music files repeatedly.
zShuffle Mode (Off / On): You can play the music randomly.
zSound Mode (Standard / Music / Movie / Clear Voice / Amplify): You can adjust the sound
setting.
Playing selected music
1Press the TOOLS[ ] button and select Selection Play.
2Select the desired music.
The mark appears to the left of the selected files.
3Press the TOOLS[ ] button and select Selection Play.
You can select or deselect all music pressing the Select All / Deselect All.
The displayed image may differ depending on the model.
Media Play / Music / Cruzer... / Music / Music_01.mp3
Music_01 Singer 1
Music_02 Singer 2
Music_01
Singer 1
2003
Fallen
Other
2:36 /
5:00
Music_03 Singer 3
Music_04 Singer 4
Music_05 Singer 5
Music_06 Singer 6
Music_07 Singer 7
Music_08 Singer 8
Music_09 Singer 9
Upper Folder
Tools
Play
Return
R
c
99
Support
Support
Supported Music Formats
Media Play - Additional Functions
Videos/Photos/Music Play Option menu
Press the TOOLS[ ] button and you can make the following operations.
File Extension Type Codec Remark
*.mp3 MPEG MPEG1 Audio Layer 3
*.m4a
*.mpa
*.aac
*.3ga
MPEG4 AAC
*.flac FLAC FLAC Seek is not supported. Supports up to
2ch.
*.ogg OGG Vorbis Supports up to 2ch.
*.wma WMA WMA
WMA 10 Pro supports up to 5.1 channel
and M2 profile. (LBR mode of M0 is not
supported)
Category Operations Videos Photos Music
Title Search You can move the other file directly.
Time Search You can search the video using and
button at one minute interval or entering
the number directly.
It may not be supported depending
on the input source.
Repeat Mode You can play media files repeatedly.
Picture Size You can adjust the picture size to your
preference.
Picture Mode You can adjust the picture setting.
Sound Mode You can adjust the sound setting.
Audio language You can change the audio language if the
video has more than one language.
Subtitle You can set the subtitle On / Off.
c
c
c
c
c
c
c
c
c
c
100
Support
Support
Subtitle Settings You can play the video with subtitles. This
function only works if the subtitles are the
same file name as the video.
Start Slide Show /
Stop Slide Show You can start or stop a slide show.
Slide Show Speed You can select the slide show speed
during the slide show.
Background Music
On / Background
Music Off
You can set on/off background music
when watching a slide show.
Background Music
Setting
You can select background music when
watching a Slide Show.
Zoom You can zoom into images in full screen
mode.
Rotate You can rotate images in full screen mode.
Edit playlist You can edit the playlist when playing the
desired music.
Selection Play Select and play multiple files.
Information You can see detailed information about
the played file.
Category Operations Videos Photos Music
c
c
c
c
c
c
c
c
c
c
c
c
101
Support
Support
7.4.3 Schedule Manager
You can set a desired channel to be displayed automatically at the intended time. In addition, you can
view, modify or delete a channel you have reserved to watch. Set the current time first to use this
function.
Using Option Menu
Set each channel using the menu options (Cancel schedule, Edit Schedule, Manually Schedule, View
Guide).
1Press the TOOLS button to select the Schedule manually.
You can press the (Manually Schedule) directly on the Schedule Manager screen.
2Press the /// or number buttons to set the Antenna, Channel, Repeat, Date, Start Time.
zAntenna: Select the desired broadcasting signal.
zChannel: Select the desired channel.
zRepeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at your convenience. If
you select Manual, you can set the day you want.
zDate: You can set the desired date.
zStart Time: You can set the start time you want.
If you want to edit or cancel the schedule, select the reserved schedule on the Booking List. Press the
TOOLS button, then select the Edit Schedule or Cancel schedule.
7.4.4 Source
Source allows you to select a variety of sources and change source device names.
You can display the screen of a source device connected to the product. Select a source from Source
List to display the screen of the selected source.
The input source can also be changed by using the SOURCE button on the remote control.
The screen may not display correctly if an incorrect source is selected for the source device you want to
convert to.
A
102
Support
Support
Edit Name
MENU
[] Support Contents Home Source TOOLS Edit Name
ENTER
[ ]
You can rename a connected source device.
zSometimes the screen will not display properly unless the name of a source device is specified in
Edit Name. In addition, it is best to rename the source device in Edit Name to obtain optimal picture
quality.
The list can include the following source devices. Source devices on the list differ depending on the
selected source.
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder /
PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA
Available settings in the Picture menu depend on the current source and settings made in Edit Name.
zWhen connecting a PC to the HDMI IN1 (DVI) port with HDMI cable, you should set the product to
PC mode under Edit Name.
zWhen connecting a PC to the HDMI IN1 (DVI) port with HDMI to DVI cable, you should set the
product to DVI PC mode under Edit Name.
zWhen connecting an AV devices to the HDMI IN1 (DVI) port with HDMI to DVI cable, you should set
the product to DVI Devices mode under Edit Name.
Information
MENU
[] Support Contents Home Source TOOLS Information
ENTER
[ ]
You can see detailed information about the selected external device.
Refresh
MENU
[] Support Contents Home Source TOOLS Refresh ENTER
[ ]
In the Source, If the external devices are not displayed, press the TOOLS button to select Refresh.
Search for connected devices.
m
m
m
103
8 Troubleshooting Guide
8 Troubleshooting Guide
8.1 Requirements Before Contacting Samsung Customer
Service Center
8.1.1 Testing the Product
Before calling Samsung Customer Service Center, test your product as follows. If the problem persists,
contact Samsung Customer Service Center.
Check if your product is operating normally by using the product test function.
If the screen remains blank while the power LED blinks even when the product is correctly connected to
a PC, perform product testing.
1Power off both the PC and product.
2Disconnect all the cables from the product.
3Power on the product.
4If "No Signal" is displayed, the product is operating normally.
If the screen remains blank, check the PC system, video controller and cable.
8.1.2 Checking the Resolution and Frequency
"Not Optimum Mode" will briefly be displayed if a mode that exceeds a supported resolution is selected
(refer to Supported Resolutions).
104
Troubleshooting Guide
8
8 Troubleshooting Guide
8.1.3 Check the followings.
Installation issue (PC mode)
The screen keeps switching on and off. Check the cable connection between the
product and PC, and ensure the connection is
secure.
(product)
Blank spaces are found at the top and bottom
of the screen when an HDMI or HDMI-DVI
cable is connected to the product and PC.
Blank spaces on the screen are not caused by
the product.
The cause of the problem is the PC or graphics
card, and can be fixed by adjusting the screen
size in the HDMI or DVI option of the graphics
card settings menu.
If the graphics card settings menu has no
option to adjust the screen size, update the
graphics card driver to the latest version.
(Please contact the graphics card or computer
manufacturer for details on how to adjust the
screen settings.)
Screen issue
The power LED is off. The screen will not
switch on.
Make sure that the power cord is connected.
(product)
"No Signal" is displayed on the screen
(refer to "Connecting to a PC").
Check that the product is connected correctly
with a cable
(product)
Check that the device connected to the
product is powered on.
"Not Optimum Mode" is displayed. This message is displayed when a signal from
the graphics card exceeds the product's
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and
set the maximum resolution and frequency
according to the product specifications.
The images on the screen look distorted. Check the cable connection to the product
(product)
105
Troubleshooting Guide
8
8 Troubleshooting Guide
The screen is not clear. The screen is blurry. Adjust Coarse and Fine.
Remove any accessories (video extension
cable, etc) and try again.
Set the resolution and frequency to the
recommended level.
The screen appears unstable and shaky. Check that the resolution and frequency of the
PC and graphics card are set within a range
compatible with the product. Then, change the
screen settings if required by referring to the
Additional Information on the product menu
and the Standard Signal Mode Table.
There are shadows or ghost images left on the
screen.
The screen is too bright. The screen is too
dark.
Adjust Brightness and Contrast.
Screen color is inconsistent. Go to Picture and adjust the Color Space
settings.
White does not really look white. Go to Picture and adjust the White Balance
settings.
There is no image on the screen and the power
LED blinks every 0.5 to 1 second.
The product is in power-saving mode.
Press any key on the keyboard or move the
mouse to return to the previous screen.
Sound issue
There is no sound. Check the connection of the audio cable or
adjust the volume
(product)
Check the volume.
The volume is too low. Adjust the volume.
If the volume is still low after turning it up to the
maximum level, adjust the volume on your PC
sound card or software program.
Screen issue
106
Troubleshooting Guide
8
8 Troubleshooting Guide
Remote control issue
The remote control does not work. Make sure that the batteries are correctly in
place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs
switched on in the vicinity.
Source device issue
A beeping sound is heard when my PC is
booting.
If a beeping sound is heard when your PC is
booting, have your PC serviced.
107
Troubleshooting Guide
8
8 Troubleshooting Guide
8.2 Q & A
Question Answer
How can I change the
frequency?
Set the frequency on your graphics card.
z"Windows XP": Go to Control Panel Appearance and
Themes Display Settings Advanced
Monitor and adjust the frequency in Monitor Settings.
z"Windows ME/2000": Go to Control Panel Display
Settings Advanced Monitor and adjust the
frequency in Monitor Settings.
z"Windows Vista": Go to Control Panel Appearance and
Personalization Personalize Display Settings
Advanced Settings Monitor and adjust the frequency in
Monitor Settings.
z"Windows 7": Go to Control Panel Appearance and
Personalization Display Adjust resolution
Advanced Settings Monitor and adjust the frequency in
Monitor Settings.
108
Troubleshooting Guide
8
8 Troubleshooting Guide
Refer to the user manual for your PC or graphics card for further instructions on adjustment.
How can I change the
resolution?
z"Windows XP": Go to Control Panel Appearance and
Themes Display Settings and adjust the resolution.
z"Windows ME/2000": Go to Control Panel Display
Settings and adjust the resolution.
z"Windows Vista": Go to Control Panel Appearance and
Personalization Personalize Display Settings and
adjust the resolution.
z"Windows 7": Go to Control Panel Appearance and
Personalization Display Adjust Resolution and
adjust the resolution.
How do I set power-saving
mode?
zWindows XP: Set power-saving mode in Control Panel
Appearance and Themes Display Screen Saver
Settings or BIOS SETUP on the PC.
zWindows ME/2000: Set power-saving mode in Control
Panel Display Screen Saver Settings or BIOS
SETUP on the PC.
zWindows Vista: Set power-saving mode in Control Panel
Appearance and Personalization Personalize
Screen Saver Settings or BIOS SETUP on the PC.
zWindows 7: Set power-saving mode in Control Panel
Appearance and Personalization Personalize
Screen Saver Settings or BIOS SETUP on the PC.
Question Answer
109
9 Specifications
9 Specifications
9.1 General
Model Name H32B H40B
Panel Size 32 inches (80 cm) 40 inches (101 cm)
Dimensions (W x H x D)
(Without Stand)
29.1 x 17.2 x 3.7 inches /
73.88 x 43.67 x 9.33 cm
36.5 x 21.7 x 3.7 inches /
92.76 x 55.10 x 9.30 cm
Dimensions (W x H x D)
(With Stand)
29.1 x 19.4 x 7.5 inches /
73.88 x 49.33 x 19.17 cm
36.5 x 23.9 x 9.0 inches /
92.76 x 60.65 x 22.76 cm
Weight
(Without Stand) 5.8 kg / 12.8 Ibs 8.9 kg / 19.6 Ibs
Weight
(With Stand) 6.4 kg / 14.1 Ibs 10.9 kg / 24.0 Ibs
Optimum resolution 1366 x 768 @ 60Hz 1920 x 1080 @ 60Hz
Model Name H46B
Panel Size 46 inches (116 cm)
Dimensions (W x H x D)
(Without Stand)
41.7 x 24.6 x 3.7 inches /
105.98 x 62.56 x 9.43 cm
Dimensions (W x H x D)
(With Stand)
41.7 x 26.8 x 9.0 inches /
105.98 x 68.07 x 22.76 cm
Weight
(Without Stand) 12.0 kg / 26.5 Ibs
Weight
(With Stand) 14.0 kg / 30.9 Ibs
Optimum resolution 1920 x 1080 @ 60Hz
Model Name H32B / H40B / H46B
Audio Output 10 W + 10 W
Environmental
considerations
Operating Temperature: 50˚F ~ 104˚F (10˚C ~ 40˚C)
Humidity : 10 % ~ 80%, non-condensing
Storage Temperature: -4˚F ~ 113˚F (-20˚C ~ 60˚C)
Humidity : 5% ~95 %, non-condensing
110
Specifications
9
9 Specifications
Power Supply : Refer to the label at the back of the product as the standard voltage can vary in different
countries.
Plug-and-Play : This product can be installed and used with any Plug-and-Play compatible systems.
Two-way data exchange between the product and PC system optimizes the product settings. Product
installation takes place automatically. However, you can customize the installation settings if desired.
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may
appear brighter or darker on the panel. This does not affect product performance.
This device is a Class B digital apparatus.
(USA only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
111
Specifications
9
9 Specifications
9.2 PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and
changing the color of the power LED if the product is not used for a specified period of time. The power
is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or
move the mouse. Power-savign mode only functions when the product is connected to a PC with a
power-saving function.
USA / CANADA
MEXICO
zThe displayed power consumption level can vary in different operating conditions or when settings
are changed.
zSOG (Sync On Green) is not supported.
zTo reduce the power consumption to 0, turn off disconnect the power cord. Disconnect the power
cable if you will not be using the product for an extended period of time (during vacation, etc.).
zPower Supply:
State
Normal Operation Power saving mode
(In PC mode)
Power off
(Power Button)
Rating Typical
Power Indicator Off Blinking On
Power
Consumption
H32B 52 W 27 W
less than 0.2 W less than 0.2 WH40B 86 W 30 W
H46B 94 W 39 W
Power Supply 110 ~ 120V
State
Normal Operation Power saving mode
(In PC mode)
Power off
(Power Button)
Rating Typical
Power Indicator Off Blinking On
Power
Consumption
H32B 54 W 27 W
less than 0.2 W less than 0.2 WH40B 87 W 30 W
H46B 95 W 39 W
Power Supply 100 ~ 240V
112
Specifications
9
9 Specifications
9.3 Preset Timing Modes
zThis product can be set to only one resolution for each screen size to obtain the optimum picture
quality due to the nature of the panel. Using a resolution other than the specified resolution may
degrade the picture quality. To avoid this, it is recommended that you select the optimum
resolution specified for your monitor.
zCheck the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT
monitor before you exchange it with the LCD monitor.
The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is
transmitted from your PC. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank with the power LED on. In such a case, change the settings according
to the following table by referring to the graphics card user manual.
Display Mode
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel
Clock
(MHz)
Sync
Polarity
(H/V)
H32B H40B
H46B
IBM, 640 x 350 31.469 70.086 25.175 +/-
IBM, 720 x 400 31.469 70.087 28.322 -/+
MAC, 640 x 480 35.000 66.667 30.240 -/-
MAC, 832 x 624 49.726 74.551 57.284 -/-
MAC, 1152 x 870 68.681 75.062 100.000 -/-
VESA, 640 x 480 31.469 59.940 25.175 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
VESA, 640 x 480 37.500 75.000 31.500 -/-
VESA, 800 x 600 37.879 60.317 40.000 +/+
VESA, 800 x 600 48.077 72.188 50.000 +/+
VESA, 800 x 600 46.875 75.000 49.500 +/+
VESA, 1024 x 768 48.363 60.004 65.000 -/-
VESA, 1024 x 768 56.476 70.069 75.000 -/-
VESA, 1024 x 768 60.023 75.029 78.750 +/+
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
113
Specifications
9
9 Specifications
Horizontal Frequency
The time required to scan a single line from the left to the right side of the screen is called a horizontal
cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is
measured in kHz.
Vertical Frequency
The product displays a single image multiple times per second (like a fluorescent light) to display what
the viewer sees. The rate of a single image being displayed repeatedly per second is called vertical
frequency or refresh rate. Vertical frequency is measured in Hz.
VESA, 1152 x 864 67.500 75.000 108.000 +/+
VESA, 1280 x 720 45.000 60.000 74.250 +/+
VESA, 1280 x 800 49.702 59.810 83.500 -/+
VESA, 1280 x 1024 63.981 60.020 108.000 +/+
VESA, 1280 x 1024 79.976 75.025 135.000 +/+
VESA, 1366 x 768 47.712 59.790 85.500 +/+
VESA, 1440 x 900 55.935 59.887 106.500 -/+
VESA,1600 x
900(RB)
60.000 60.000 108.000 +/+
VESA, 1680 x 1050 65.290 59.954 146.250 -/+
VESA, 1920 x 1080 67.500 60.000 148.500 +/+
Display Mode
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel
Clock
(MHz)
Sync
Polarity
(H/V)
H32B H40B
H46B
c
c
c
c
c
c
c
c
c
c
c
c
114
Specifications
9
9 Specifications
9.4 License
TheaterSound HD, SRS and symbol are trademarks of SRS Labs, Inc.
TheaterSound HD technology is incorporated under license form SRS Lab,
Inc.
SRS TheaterSound™ provides the most immersive surround sound
experience from the product built-in speakers, while maintaining steady
volume and delivering rich bass and clear dialog.
Manufactured under license from Dolby Laboratories. Dolby and the double-
D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and the Symbol are registered trademarks. & DTS
2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product
Includes software. DTS, Inc. All Rights Reserved.
DivX Certified to play DivX video up to HD 1080p, including premium
content.
DivX , DivX Certified and associated logos are trademarks of DivX, Inc.
and are used under license.
ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, Inc. This is an official
DivX Certified device that plays DivX video. Visit www.divx.com for more information and
software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to
play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate
the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on
how to complete your registration.
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710;
7,519,274 DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or
its subsidiaries and are used under license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
Open source license notice
In the case of using open source software, Open Source license are available on the product
menu.
Open Source License Notice is written only English.
¯
´
´
´ ´
´
´
´
115
Appendix
Appendix
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
NORTH AMERICA
U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com
CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca
http://www.samsung.com/ch_fr
(French)
MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com
116
Appendix
Appendix
Responsibility for the Pay Service (Cost to Customers)
When the service is requested, in spite of in warranty, we may charge you for a visit from a service
technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
zIf a service technician gives instructions on how to use product or simply adjusts options without
disassembling product.
zIf a defect is caused by external environmental factors. (Internet, Antenna, Wired Signal, etc.)
zIf a product is reinstalled or devices are connected additionally after installing the purchased product
for the first time.
zIf a product is reinstalled to move to a different spot or to move to a different house.
zIf customer requests instructions on how to use because of another company's product.
zIf customer requests instructions on how to use the network or another company's program.
zIf customer requests software installation and setup for the product.
zIf a service technician removes/cleans dusts or foreign materials inside of the product.
zIf customer requests an installation additionally after purchasing a product through home-shopping
or online.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair.
If a product damage is caused by;
zexternal impact or drop .
zuse of supplies or separatly sold product unspecified by Samsung.
zrepair from a person besides an engineer of outsourcing service company or partner of Samsung
Electronics Co., Ltd.
zremodeling or repairing the product by customer.
zusing it with incorrect voltage or non-authorised electrical connections.
znot following the "cautions" in User Manual.
Others
zIf product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)
zIf consumable components are all used up. (Battery, Toner, Fluorescent lights, Head, Vibrator,
Lamp, Filter, Ribbon, etc.)
If customer requests a service in case the product has no defect, service fee may be charged. So
please read User Manual first.
117
Appendix
Appendix
Optimum Picture Quality and Afterimage Burn-in Prevention
Optimum Picture Quality
zTo enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and
refresh rate as follows. The picture quality of TFT-LCDs may degrade if the optimum resolution is not
selected.
Resolution:
H32B: 1366 x 768
H40B, H46B: 1920 x 1080
Vertical frequency (refresh rate): 60~75 Hz
zDue to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may
be brighter or darker on the panel. This does not affect product performance.
The number of sub-pixels by panel type:
H32B: 3,147,264
H40B, H46B : 6,220,800
zRun "Auto Adjustment" to improve the picture quality. If noise is still found even after auto
adjustment, adjust Coarse or Fine.
zLeaving the screen fixed on a stationary image for an extended period of time may cause afterimage
burn-in or defective pixels.
Activate power-saving mode or a dynamic screen saver if you will not be using the product for
an extended period of time.
zUnlike CDT monitors, TFT-LCD monitors (due to the nature of the panel) can be set to only one
resolution to obtain the optimum picture quality. Therefore, setting a resolution other than the
specified resolution may degrade the picture quality. To avoid this, it is recommended that you select
the optimum resolution specified for your monitor.
118
Appendix
Appendix
Prevention of Afterimage Burn-in
What is afterimage burn-in?
Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers
to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period
of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that
control the liquid crystals.
Such a voltage difference between electrodes increases with time and makes the liquid crystals thinner.
When this occurs, a previous image can remain on the screen when the pattern changes. To prevent this,
the accumulated voltage difference should be reduced.
Black Matrix
Source Drain
Data Bus-Line
{m{
Gate Pixel Electrode (ITO) Storage
Capaccitor (Cs)
Color-Filter
Common
Electrode (ITO)
119
Appendix
Appendix
zPowering Off, Screen Saver and Power Saving Mode
Power off the product for 2 hours after using it for 12 hours.
Go to Display Properties > Power Supply on your PC and set the product to power off as
required.
Using a screen saver is recommended.
It is best to use a single-color or moving-image screen saver.
zRegular Color Change
Use 2 colors
Switch between 2 colors every 30 minutes as shown above.
zAvoid combinations of a text color and background color of contrasting brightness.
Avoid using grey as it may contribute to afterimage burn-in.
Avoid using colors of contrasting brightness (black and white; grey).
zRegular Text Color Change
Use bright colors of similar brightness.
Interval: Change text color and background color every 30 minutes
Move and change text every 30 minutes as shown below.
Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours.
The best way to protect the product from afterimage burn-in is switching the power off or
setting the PC or system to run a screen saver when not in use. Also, Warranty service may be
limited depending on instruction guide.
FLIGHT FLIGHT
TIME TIME
OZ348
UA102 21:10
20:30
OZ348
UA102 21:10
20:30
Type 1 Type 2
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348
:
:
FLIGHT TIME
OZ348 20:30
:
:
[ Step 1 ] [ Step 2 ] [ Step 3 ]
20:30
120
Appendix
Appendix
Terminology
Dot Pitch
The monitor and screen consist of red, green and blue dots. A shorter distance between the dots
produces a higher resolution. Dot pitch refers to the distance between the shortest distance between
dots of the same color. Dot pitch is measured in millimeters.
Vertical Frequency
The monitor displays a single image many times per second (like a fluorescent light that flickers) to
display an image for a viewer to see. The rate of a single image being displayed repeatedly per second
is called vertical frequency or refresh rate. Vertical frequency is measured in Hz.
E.g. 60Hz refers to a single image being displayed 60 times in one second.
Horizontal Frequency
The time required to scan a single line from the left to the right side of the screen is called a horizontal
cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency
is measured in kHz.
Plug & Play
Plug & Play is a function that allows the automatic exchange of information between a monitor and PC
to produce an optimum display environment. The product uses VESA DDC (international standard) to
execute Plug & Play.
Resolution
Resolution is the number of horizontal dots (pixels) and vertical dots (pixels) that form a screen. It
represents the level of display detail. A higher resolution enables more data to be displayed on the
screen and is useful to perform multiple tasks simultaneously.
E.g. A resolution of 1920 X 1080 consists of 1,920 horizontal pixels (horizontal resolution) and 1,080
vertical pixels (vertical resolution).
DVD(Digital Versatile Disc)
DVD refers to a CD-sized mass storage disk where you can save multimedia (audio, video or game)
applications using MPEG-2 video compression technology.
HDMI(High Definition Multimedia Interface)
It is an interface that can be connected to a digital audio source as well as a high-definition video
source by using a single cable without compression.
121
Appendix
Appendix
Component ports (green, blue and red)
The component ports, which identify, transmit and receive contrast signals, provide superior picture
quality to any other video connection methods.
Stereo
Stereo refers to a technology that outputs audio signals via two channels. It delivers 3D sound
experience through separate left and right audio channels over two speakers.
Source
Input source refers to a video source device connected to the product such as a camcorder or video
or DVD player.
480i / 480p / 720p / 1080i / 1080p
Each of the scanning rates above refers to the number of effective scanning lines that decides the
screen resolution. The scanning rate may be indicated in i (interlaced) or p (progressive), depending
on the scanning method.
- Scanning
Scanning refers to a process of sending pixels that form an image progressively. A larger number of
pixels will deliver a clearer and more vivid picture.
- Progressive
In progressive scan mode, all lines of pixels are scanned one by one (progressively) on the screen.
- Interlaced
In interlaced scan mode, every other line of pixels is scanned from top to bottom first and then the
remaining lines of pixels (that were not scanned) are scanned.
Index 122
Index
A
Antenna 51
Antenna (Air/Cable) 67
Anynet+(HDMI-CEC) 83
Appendix 115
Auto Program 67
B
Batteries 26
C
Caption 76
Change PIN 80
Clear Scrambled Channel 69
Clock Mode 71
Contact SAMSUNG WORLDWIDE 115
Contents Home 89
Custom settings screen 54
E
Eco Solution 74
Edit Name 102
Energy Saving 74
F
Fine Tune 69
G
Game Mode 82
I
Items sold separately 20
M
Menu Language 74
N
No Signal Power Off 74
P
PC connection 44
Picture Mode 53
Picture Size 55
PIP 80
Port 23
Problem report 103
R
Remote Control 25
Resolution configuration 46
S
Screen Adjustment 55
Self Diagnosis 87
Setup 70
Sleep Timer 72
Software Upgrade 88
Standard 53
V
Video connection 48