Table of Contents
- English
- Before Reading This Install Guide
- Warning! Important Safety Instructions
- 01 What's in the Box?
- 02 TV Installation
- 03 The Remote Control
- 04 Initial Setup
- 05 The Connection Panel
- 06 Connections
- 07 Using a TV Viewing Card (“CI or CI+ Card”)
- 08 Setting the Admin Menu
- 09 Editing Channels
- 10 Specifications and Other Information
Samsung HG32T5300EU User Manual
Displayed below is the user manual for HG32T5300EU by Samsung which is a product in the Hospitality TVs category. This manual has pages.
Related Manuals
HG32T5300E
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at www.samsung.com
Model Serial No.
INSTALL GUIDE
5 SERIES
English
Before Reading This Install Guide
This TV B2B (Business to Business) model is designed for hotels or the other hospitality businesses, supports a variety
of special functions, and lets you limit some user (guest) controls.
Figures and illustrations in this Install Guide are provided for reference only and may differ from the actual product
appearance. Product design and specifications may change without notice.
Operational Modes
This TV has Standalone mode.
In this mode, the TV works alone without an external SBB or the STB.
The TV has a Admin menu that lets you easily set its various hospitality functions. Please see page 23.
The menu also lets you activate or de-activate some TV and hospitality functions so you can create your optimal
hospitality configuration.
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama
uneven screen wear, which will affect image quality. To reduce the chance that this effect will occur, please follow the
recommendations below:
Avoid displaying the same TV channel for long periods.
Always try to display a full screen image.
Reduce brightness and contrast to help prevent the occurrence of after-images.
Use all TV features designed to reduce image retention and screen burn-in.
English - 2
Warning! Important Safety Instructions
Please read the Safety Instructions before using your TV.
Refer to the table below for an explanation of symbols which may be on your Samsung product.
CAUTION Class II product: This symbol indicates that a
safety connection to electrical earth (ground)
is not required. If this symbol is not present on
a product with a main lead, the product MUST
have a reliable connection to protective earth
(ground).
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
AC voltage: Rated voltage marked with this
symbol is AC voltage.
This symbol indicates that high voltage is
present inside. It is dangerous to make any kind
of contact with any internal part of this product.
This symbol indicates that this product has
included important literature concerning
operation and maintenance.
Caution. Consult instructions for use: This
symbol instructs the user to consult the install
guide for further safety related information.
The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure
reliable operation of this apparatus and to protect it from overheating, these slots and openings must never be
blocked or covered.
–
ventilation is provided.
–
–
in a wet basement, or near a swimming pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an
authorised dealer immediately.
This apparatus uses batteries. In your community, there might be environmental regulations that require you to
dispose of these batteries properly. Please contact your local authorities for disposal or recycling information.
electric shock.
Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon
or against them. Pay particular attention to cords at the plug end, at wall outlets, and at the point where they exit
from the appliance.
To protect this apparatus from a lightning storm, or when left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due
to lightning and power line surges.
English - 3
adaptor corresponds to the local electrical supply.
Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric shock.
To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this
apparatus.
Be sure to plug in the power cord until it is firmly seated. When unplugging the power cord from a wall outlet,
with wet hands.
If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from
it - unplug it immediately and contact an authorised dealer or Samsung service centre.
Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an
extended period of time (especially when children, elderly, or disabled people will be left alone in the house).
– Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to
generate sparks and heat or by causing the insulation to deteriorate.
Be sure to contact an authorised Samsung service centre for information if you intend to install your TV in a location
with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a
day such as in an airport, a train station, etc. Failure to do so may lead to serious damage to your TV.
Use only a properly grounded plug and wall outlet.
– An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
To turn off this apparatus completely, disconnect it from the wall outlet. To ensure you can unplug this apparatus
quickly if necessary, make sure that the wall outlet and power plug are readily accessible.
Store the accessories (batteries, etc.) in a location safely out of the reach of children.
service centre.
To clean this apparatus, unplug the power cord from the wall outlet and wipe the product with a soft, dry cloth.
detergents. These chemicals can damage the appearance of the TV or erase the printing on the product.
CAUTION: There is danger of an explosion if you replace the batteries used in the remote with the wrong type of
battery. Replace only with the same or equivalent type.
Use care when touching the TV after it has been on for some time. Some parts can be warm to the
touch.
English - 4
Contents
Before Reading This Install Guide ---------------------------------------------------------------------------- 2
Warning! Important Safety Instructions ---------------------------------------------------------------------------- 3
01 What's in the Box?
---------------------------------------------------------------------------- 9
02 TV Installation
Mounting the TV on a wall ---------------------------------------------------------------------------- 10
Providing proper ventilation for your TV ---------------------------------------------------------------------------- 11
Safety Precaution: Securing the TV to the wall to prevent
falling ---------------------------------------------------------------------------- 12
03 The Remote Control
About the Buttons on the Remote Control ---------------------------------------------------------------------------- 13
Installing batteries into the remote control
---------------------------------------------------------------------------- 14
04 Initial Setup
Using the TV Controller ---------------------------------------------------------------------------- 16
05 The Connection Panel
06 Connections
Connecting to your Internet network ---------------------------------------------------------------------------- 19
English - 5
07 Using a TV Viewing Card (“CI or CI+ Card”)
Connecting the “CI or CI+ Card” via COMMON INTERFACE
slot ---------------------------------------------------------------------------- 21
Using the “CI or CI+ Card” ---------------------------------------------------------------------------- 22
08 Setting the Admin Menu
Admin menu items ---------------------------------------------------------------------------- 24
USB Cloning ---------------------------------------------------------------------------- 30
Settings Cloned in the Admin menu ---------------------------------------------------------------------------- 31
---------------------------------------------------------------------------- 33
Updating the TV’s Software ---------------------------------------------------------------------------- 36
09 Editing Channels
Using Channel Editor ---------------------------------------------------------------------------- 37
10 Specifications and Other Information
Specifications ---------------------------------------------------------------------------- 40
Environmental Considerations ---------------------------------------------------------------------------- 40
---------------------------------------------------------------------------- 40
Supported Resolutions for Connecting a Computer ---------------------------------------------------------------------------- 41
Supported Resolutions for Video Signals ---------------------------------------------------------------------------- 42
---------------------------------------------------------------------------- 43
---------------------------------------------------------------------------- 45
English - 6
01 What's in the Box?
Make sure the following items are included with your TV. If any items are missing, contact your dealer.
Remote Control & Batteries (AAA x 2)
(Not available in some locations) Power Cord Quick Setup Guide / Regulatory Guide
(Not available in some locations)
The items’ colours and shapes may vary depending on the models.
Cables not included can be purchased separately.
Check for any accessories hidden behind or in the packing materials when opening the box.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e., where the user
manual has not been read).
has not been read).
The screen can be damaged from direct pressure when handled
incorrectly. As shown in the figure, make sure to grip the edges
of the screen when you lift the TV.
Do Not Touch
This Screen!
English - 7
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic
accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste
at the end of their working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of waste and recycle them
responsibly to promote the sustainable reuse of material resources.
government office, for details of where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product and its electronic accessories should not be mixed with other commercial wastes
for disposal.
Correct disposal of the batteries in this product
(Applicable in countries with separate collection systems)
This marking on battery, manual or packaging indicates that the batteries in this product should not be
disposed of with other household waste at the end of their working life. Where marked, the chemical
harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types
of waste and recycle them through your local, free battery return system.
WEEE, Batteries, visit
corner.html
English - 8
Installing the LED TV Stand
Assembling the Stand and Components
When installing the stand, use the provided components and parts.
x 4
Stand Screw
1
R L
L
R
NOTE
Place a soft cloth over the table to protect the TV, and then place the TV so that its screen faces down toward the
table surface.
Insert the Stands into the slot on the bottom of the TV.
2 3
x 2
(M4 x L12)
x 2
(M4 x L12)
NOTE
Make sure that at least two persons lift and move the TV.
Make sure to distinguish between the front and back of each component when assembling them.
English - 9
02 TV Installation
Mounting the TV on a wall
If you mount this TV on a wall, follow the instructions exactly as set out by the manufacturer. Unless it is
correctly mounted, the TV may slide or fall and cause serious injury to a child or adult and serious damage
to the TV.
Refer to the installation manual included with the Samsung wall mount kit.
TVWall mount bracket
C
Samsung is not responsible for any damage to the product or injury to yourself or others if you choose to install the
wall mount on your own.
surfaces other than plaster board, contact your nearest dealer for additional information. If you install the TV on a
ceiling or slanted wall, it may fall and result in severe personal injury.
Standard dimensions for wall mount kits are shown in the table on the next page.
If you are installing a third-party wall mount, note that the length of the screws you can use to attach the TV to the
wall mount is shown in column C in the table on the next page.
When installing a wall mount kit, we recommend you fasten all four VESA screws.
If you want to install a wall mount kit that attaches to the wall using two top screws only, be sure to use a Samsung
depending on the geographical region.)
English - 10
TV size in
inches
VESA screw hole specs (A * B) in
millimetres C (mm)Standard
Screw Quantity
32 100 x 100 26-28 M4 4
Do not install your wall mount kit while your TV is turned on. This may result in personal injury from electric
shock.
specifications. Screws that are too long may cause damage to the inside of the TV set.
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on the wall mount specifications.
injury. Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used
or when the consumer fails to follow the product installation instructions.
Always have two people mount the TV onto a wall.
Providing proper ventilation for your TV
When you install your TV, maintain a distance of at least 10 cm between the TV and other objects (walls, cabinet sides,
etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a problem with the
product caused by an increase in its internal temperature.
When you install your TV with a stand or a wall mount, we strongly recommend you use parts provided by Samsung
only. Using parts provided by another manufacturer may cause difficulties with the product or result in injury
caused by the product falling.
Installation with a stand Installation with a wall mount
10 cm10 cm
10 cm 10 cm
10 cm
10 cm10 cm
English - 11
Safety Precaution: Securing the TV to the wall to prevent falling
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure
your children do not hang on or destabilise the TV. This action may cause the TV to tip over,
causing serious injuries or death. Follow all safety precautions provided in the Safety Flyer
included with your TV. For added stability and safety, you can purchase and install the anti-fall
device as described below.
WARNING: Never place a television set in an unstable location. The television set may fall, causing serious
personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions
such as:
Always use cabinets or stands or mounting methods recommended by the manufacturer of the
television set.
Always use furniture that can safely support the television set.
Always ensure the television set is not overhanging the edge of the supporting furniture.
Always educate children about the dangers of climbing on furniture to reach the television set or its
controls.
Always route cords and cables connected to your television so they cannot be tripped over, pulled or
grabbed.
Never place a television set in an unstable location.
Never place the television set on tall furniture (for example, cupboards or bookcases) without anchoring
both the furniture and the television set to a suitable support.
Never place the television set on cloth or other materials that may be located between the television
set and supporting furniture.
Never place items that might tempt children to climb, such as toys and remote controls, on the top of
the television or furniture on which the television is placed.
If the existing television set is going to be retained and relocated, the same considerations as above should
be applied.
Preventing the TV from falling
1. Using the appropriate screws, firmly fasten a set of brackets to the wall.
Confirm that the screws are firmly attached to the wall.
–
the type of wall.
2.
TV.
– For the screw specifications, refer to the standard screw part in the
table under "Mounting the TV on a wall".
3. Connect the brackets fixed to the TV and the brackets fixed to the wall
with a durable, heavy-duty string, and then tie the string tightly.
– Install the TV near the wall so that it does not fall backwards.
– Connect the string so that the brackets fixed to the wall are at the
same height as or lower than the brackets fixed to the TV. The product colour and shape
may vary depending on the
model.
English - 12
03 The Remote Control
About the Buttons on the Remote Control
The images, buttons, and functions of the remote control may differ depending on the model.
The remote control has Braille points on the Power, Channel, Volume, and Select buttons and can be used by
visually impaired persons.
If you use the remote control that comes with your TV to control another TV, some functions may not operate
normally.
video sources.
Turns the sound on/off.
Channel List.
Changes the current channel.
Exits the menu.
Use these buttons according to the
directions on the TV screen.
Use these buttons with specific
features. Use these buttons
according to the directions on the
TV screen.
APPS.
Press to display information on the
TV screen.
Moves the cursor, selects the
onscreen menu items, and changes
the values seen on the TV's menu.
Turns the TV on and off.
Gives direct access to channels.
Adjusts the volume.
Alternately selects Teletext mode,
Full > Double > Mix > Off.
Guide screen.
Quickly select frequently used
functions. (Not available)
Returns to the previous menu or
channel.
ALARM
Enter the hour you want the TV to
turn on.
X
available)
SUBT.
When pressed the button, the
Accessibility Shortcuts menu
appears.
E (Select)
Press this button to select or run a
focused item.
Home Menu.
English - 13
Installing batteries into the remote control (Battery size: AAA)
Match the polarities of the batteries to the symbols on the battery compartment.
2
3
1
The colour and shape of the remote may vary depending on the model.
Use the remote control within 7 m of the TV.
Bright lights may affect the performance of the remote control. Avoid using the remote control near special
fluorescent lights or neon signs.
Alkaline batteries are recommended for longer battery life.
1. Gently pull on the battery cover's notch and then remove the cover completely once it comes loose.
2. Insert 2 AAA alkaline batteries, making sure to align the positive and negative polarities correctly.
3. Place the battery cover on the remote control and insert the cover into the remote control.
4. Slide the battery cover in the order shown above so that the cover is completely attached to the remote control.
English - 14
04 Initial Setup
When you turn on your TV for the first time, it immediately starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your viewing environment.
If you already completed the Initial Setup, run the Initial Setup again using the following menu.
Admin menu > System > TV Reset
If you select TV Reset, the TV resets all values to their factory defaults. When the TV turns off, press the Power button on
the remote control to turn on the TV. The TV starts the Initial Setup.
The Initial Setup steps may differ with the model or geographical area.
1
Select the region settings
Before select region, refer to the country list information on the right.
If you select the incorrect region, execute TV Reset again after the Initial Setup is completed.
If the region is changed, the TV automatically turns off and on.
2
Selecting your TV installation type
Basic TV Setup: Select to proceed to the next step to set the basic options for using your TV.
Cloning Mode: Copy the system settings from the USB or server to the TV.
Factory Menu: End Initial Setup and go to Admin menu directly.
Follow the instructions on the screen to configure the settings for your own viewing environment.
English - 15
Using the TV Controller
TV Controller button at the bottom of the TV, and then use the Control menu. The
Control menu appears when the TV Controller button is pressed while the TV is On. For more information about its
usage, refer to the figure below.
Control menu
:Power off :Volume Up
:Channel Up :
: :Source
TV Controller button / Remote control
sensor
Press: Move
Press & Hold: Select
The TV Controller button is located on the
bottom of the TV.
English - 16
05 The Connection Panel
⑤ ⑥ ⑦
⑧
①
③
④
②
When connecting an external device, match the colour of the connection port to the cable.
Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off.
① COMMON INTERFACE
Watches paid channels by inserting your TV viewing card (“CI or CI+ Card”) into the COMMON INTERFACE slot.
English - 17
② HDMI IN 1, 2 (ARC)
–
and video.
–
contact to the Samsung customer care centre.
③ USB (5V 1.0A)
– Connector for software upgrades and Media Play, etc.
– Service connection.
④ POWER
⑤ LAN
⑥ DIGITAL AUDIO OUT (OPTICAL)
⑦ ANT IN (SATELLITE), (AIR/CABLE)
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system / A satellite receiver
⑧ COMPONENT IN / AV IN
VCRs.
– Connect audio cables to R-AUDIO-L on your TV and the other ends to corresponding audio out ports on AV
(Composite) devices.
– Connect component video cables (not supplied) to the component ports (PR, PB, Y) on your TV and the other
–
– R-Y, B-Y and Y or Cr, Cb and
Y.
– For AV (Composite), connect RCA audio cables (not supplied) to R-AUDIO-L on your TV set and the other ends to
corresponding audio out ports on an external device.
– When your are connecting a AV (Composite) device to AV IN [Y/Video], connect the video cable (yellow) to the
AV IN [Y/VIDEO] port (green/yellow).
English - 18
06 Connections
Connecting to your Internet network
wired or wireless connection.
After you have physically connected the TV to your network, you must configure the network connection to
Admin menu
(Admin menu > Smart Service > Netwotk Setup).
Establishing a wireless Internet connection
Connect the TV to the Internet using a wireless access point or modem.
Wireless IP access point or
This TV supports the IEEE 802.11 a /b /g /n /ac communication protocols. Samsung recommends using IEEE
802.11n. Otherwise, when you play video over a network connection, the video may not play smoothly.
– Some of the IEEE 802.11 communication protocols may not be supported depending on the model or
geographical area.
To use a wireless network, the TV must be connected to a wireless access point or modem. If the wireless access
Select a channel that is not currently in use for the wireless access point. If the channel set for the wireless access
point is currently being used by another device, the result is usually interference and/or a communications failure.
Most wireless networks have an optional security system. To enable a wireless network's security system, you need
to create a security key using characters and numbers, and then enter that key into the access point through its
English - 19
Network Security Protocols
The TV only supports the following wireless network security protocols:
in networks running in the 802.11n mode.
If the wireless access point supports WPS (Wi-Fi Protected Setup), you can connect the TV to your network using PBC
WPA key settings.
Establishing a wired Internet connection
There are three main ways to connect your TV to your network using cable, depending on your network setup. They are
illustrated below:
The Modem Port on
the Wall
Modem Cable (Not Supplied)
TV Rear Panel
External Modem
TV Rear Panel
The Modem Port on
the Wall
Modem Cable
(Not Supplied)
(Not Supplied)
(Not Supplied)
External Modem
IP Router that has a
TV Rear Panel
the Wall
The TV will not be able to connect to the Internet if your network speed is below 10 Mbps.
(The TV does not support network speeds less than or equal to 10Mbps.)
English - 20
07 Using a TV Viewing Card (“CI or CI+ Card”)
Watches paid channels by inserting your TV viewing card (“CI or CI+ Card”) into the COMMON INTERFACE slot.
– The 2 CI card slots may not be supported depending on the model.
– Turn the TV off to connect or disconnect a “CI or CI+ Card”.
– The “CI or CI+ Card” may not supported depending on the model.
Connecting the “CI or CI+ Card” via COMMON INTERFACE slot
Connect the “CI or CI+ Card” to the COMMON INTERFACE slot as shown in the image below.
English - 21
Using the “CI or CI+ Card”
Samsung TV follow up CI+ 1.4 standard. When Samsung TV product display the pop-up message, it may happen due
to CI+ 1.4 Version inconsistency. If you have a problem, please contact Samsung Call Centre.
–
– Where a CI+ Common Interface module is incompatible with Samsung TV then please remove the module and
contact the CI+ operator for assistance.
The Pairing information will be displayed in about 2-3 minutes. If an error message is displayed, please contact your
service provider.
When the configuration of channel information has finished, the message “Updating Completed” is displayed,
indicating the channel list is updated.
–
–
cause damage to it.
–
– The location of the COMMON INTERFACE slot may be different depending on the model.
–
– If you have any problems, please contact a service provider.
–
English - 22
08 Setting the Admin Menu
To access the Admin menu, press the
following buttons on the remote control:
1. Press the MUTE button.
2. Press the 1 button.
3. Press the 1 button.
4. Press the 9 button.
5. Press the SelectE button.
To control the TV functions in the Admin menu, the TV has two modes, the Standalone mode and the Interactive mode.
The menu items that differ between the modes are listed below.
Menu items in the Standalone mode only:
SI Vendor: OFF / Movielink / Swisscom / SSCP
LYNK Cloud, LYNK HMS, Virtual Standby, Room Number and its submenus.
Menu items in the Interactive mode only:
SI Vendor: Samsung and other vendors.
All other items appear in both modes.
After a menu appears, follow these general directions to navigate and change values:
Use the directional buttons on the remote control to move from menu item to menu item.
Press the Select button on the remote control to select a menu item. The screen displays that menu item only.
Press the left or right directional button to change a value. The right directional button increases numerical values.
The left arrow button decreases numerical values.
When the screen is displaying one menu item, you can press the up or down directional button to display the next
or previous menu item.
Press the RETURN button to exit the current menu item and go to a higher menu level.
To exit a Admin menu, turn off the TV, and then turn it on again. Any changes you made are saved except changes
to SI (System Integration) vendor. For changes to SI vendor, you must turn the TV off, wait until the power indicator
at the bottom of the TV glows steadily. And then unplug the TV's power cord, wait for the power indicator to go off,
and then plug the TV's power cord in again.
To change menus between the Interactive mode and the Standalone mode, follow the steps below:
1. Hospitality Mode menu item in the top left corner of the menu.
2. Press the Select button on the remote control. Only the Hospitality Mode menu item is displayed.
3. Press the left or right directional button to change the Hospitality Mode item from Standalone to Interactive or
from Interactive to Standalone.
4. Press the RETURN button on the remote control. The entire menu re-appears with your selection displayed in the
Hospitality Mode item.
– After you have set the values in one TV, you can clone those values to multiple TVs.
– For more information about the USB cloning refer to page 30.
English - 23
Admin menu items
To exit from this menu, turn off (or turn off and unplug the power cable if you have changed SI vendor) the TV, and then
turn on again. Any changes you made are saved.
The menu items may not be supported depending on the model or geographical area.
Admin menu Item Description
SI Vendor OFF / Movielink / Swisscom
Power On
Power On Channel
Set the channel to display when the TV is turned on.
User DefinedPower On Channel
Num. See Power On Channel Num below.
Last Saved: If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
Power On Channel Num When the TV is turned on, it switches automatically to this channel.
Power On Channel Type Select the type of the channel will be displayed when the TV is turned on.
ATV (analogue air band), DTV (digital air band).
Power On Volume
Set volume level when the TV is turned on.
User Defined
Last Saved: When the TV is turned on, it returns to the volume that had been set
when the power had been turned off.
Power On Volume Num The TV turns on with set volume level in Standalone mode.
Min Volume The minimum volume level the user can set in Standalone mode.
Max Voume The maximum volume level the user can set in Standalone mode.
Power On Source Select the input source to be displayed when the TV is turned on.
Power On Option
unplugged the TV and then plugged it in again.
Last Option: Returns to its last power state. If it was in standby mode, it returns to
standby mode. If it was on, it turns on.
Power ON: When the power returns, the TV turns on.
Standby: When the power returns, the TV enters the standby mode.
Channel
Channel Setup
Gives you direct, immediate access to some of the channel menu functions on the
Broadcasting menu such as Auto Tuning, Programme Rating Lock, Audio Options,
etc.
Channel Editor
Change the channel numbers and names, manage genre and language groups
and delete channels.
Apply the Screen Off to channels you select. The Screen Off blanks out the video
from a channel and outputs only audio.
display each channel directly.
English - 24
Admin menu Item Description
Channel
Mixed Channel Map
Enables showing/browsing all antenna type (Air/Cable) channels at the same time.
ON: When set to on, guests can access the complete channel map irrespective of
the selected antenna type. The Channel List/Channel Editor will also populate Air
as well Cable type channels.
OFF: When set to off, guest can access the channel map corresponding to the
selected antenna type (Air/Cable) only. The Channel List/Channel Editor will only
show the selected antenna type channels.
Dynamic SI
ON
Channel Editor.)
OFF
programme channel number in Channel Editor. While TV do not support auto
channel number update.)
Channel Rescan Message
When there is a mismatch between the data in the channel map and the transmitted
data, the TV autotunes the channels to restore the data/parameters in the channel
map.
ON: When Channel Rescan Message
channels are being rescanned will be displayed to the guest.
OFF: When Channel Rescan Message
should not to be displayed to the guests.
MyChannel Enable or disable the My Channel function.
Subtitle Auto On Automatically displays the subtitle.
TTX Widescreen Mode ON: TTX should show in
OFF: TTX should show in
English - 25
Admin menu Item Description
Menu OSD
Picture Menu Lock ON: The Picture menu is disable for guest.
OFF: The Picture menu is enable for guest.
Menu Display ON: The main menu is displayed.
OFF: The main menu is not displayed.
Channel Menu Display OFF: Broadcasting menu is disable for guest.
ON: Broadcasting menu is enable for guest.
Panel Button Lock
Turning the TV Controller button operations on or off.
Unlock: Unlocks TV Controller button.
Lock
OnlyPower
Clock
Local Time
Select the way to update the clock data
Manual: The clock is set manually by the user when the TV is in Standalone mode.
Time Channel: The clock is set from the selected channel.
TTX: Bring up the time information from the TTX stream.
Time Channel Type
Select the type of the channel to update the clock data.
DTV (digital air band)
This function is only available Local Time set to Time Channel.
Time Channel Num Select the number of the channel to update the clock data.
This function is only available Local Time set to Time Channel.
External
Source USB Pop-up Screen
When USB is connected to the TV :
Default: A popup window appears.
Automatic: This enters the USB content menu automatically.
Disable: Neither the popup window nor the menu appears.
Eco
Solution Power Saving Mode ON: Turns on the energy saving function.
OFF: Turns off the energy saving function.
Cloning
Clone TV to USB Clone the current TV options to a USB device.
Clone USB to TV Clone the saved TV options on a USB device to the TV.
Setting Auto Initialize If you set Setting Auto Initialize to On, and the TV's power is turned off and on, TV
menu items are restored again to their values cloned initially.
English - 26
Admin menu Item Description
Smart
Service
Network Setup
Run the Network
following items:
Network Status: View the current network and Internet status.
Open Network Settings: Connect to an available network.
Reset Network: Restore the network settings to the factory default.
Expert Settings: Configure advanced network settings.
Download by App ID
Apps Editable
Provide a way to enable or disable the APPS and Notification Settings menu.
ON: Enable the APPS and Notification Settings menu.
OFFAPPS and Notification Settings menu.
Terms & Privacy View the entire text of the Terms & Privacy document.
service agreement.
Smart Features
Run the Smart Features menu.
Autorun Smart Hub: If Autorun Smart Hub is set to On, the TV automatically
displays the when you turn on the TV.
Home App Preview Editor
Quick Settings Editor Edit the items to be displayed in Quick Settings and change their order.
Samsung Account Create and manage your own Samsung account.
English - 27
Admin menu Item Description
Security
Factory Lock
Admin menu.
ON: The password is needed before entering Admin menu.
OFF
Password Popup
Enable or disable password input popup window. If this option is set to off, the TV will
not display the password input popup window when entering the Admin menu. If set
to ON, the password input popup window appears.
Password Input
If this function is enabled, the password input popup window appears which asks for
an 8-character security password. The admin must enter a password before applying
or updating security preferences. After the correct password is entered, options such
as Password Setting, Password Reset and Security Mode are available.
Password Setting User can change the password.
Password Reset Password is reset to "00000000."
Security Mode
Provides password protected administrative fucntionality to enable or disable
features of hospitality TV, such as USB, HDMI. To use this option, Security Mode set
to ON. After Security Mode set to ON, options such as USB, HDMI are automatically
enabled.
USB Enable or disable USB access. If this function is set to Disable, access to USB media is
blocked. Clone USB to TV and TV Reset will be disabled in the Admin menu.
HDMI Disable
TTX Security If this option is disabled, the TTX feature will not work when the TTX button is pressed
on the remote control.
DRM DRM Mode
OFF
LYNK DRM: Select to turn on support only.
System Self Diagnosis
for TV
Run the Device Care menu.
Start Device Care
Manage Storage: Manage the TV storage capacity.
Self Diagnosis
functions.
Request Support: Request a service when any problem occurs on your TV.
English - 28
Admin menu Item Description
System
System Manager
Gives you direct, immediate access to System Manager functions such as Time,
Language, Change PIN.
System Manager allow you to adjust your TV's system and customise settings for your
viewing environment.
OTN Update
present on server.
OTN Update changed to ON and disabled when Enrollment Status in LYNK Cloud
is Yes.
SW Update
About This TV
Standby LED
When the TV is in standby mode, you can configure the settings of the power
indicator.
ON
OFF
TV Reset Returns all settings on the TV to their factory defaults.
*LYNK
Cloud
Enrollment LYNK Cloud solution.
Enrollment Status Check the status of the TV enrollment in the LYNK Cloud service.
**Virtual
Standby
Virtual Standby Mode
When the AC power cord is plugged in and the power is off, this option maintains the
TV's important features even after the screen is off.
Electricity consumption may vary depending on the environment.
Reboot Time After the TV power is off (in Virtual Standby Mode) if there is no input from the user
within the set Reboot Time, the TV will reboot and enter Virtual Standby Mode again.
Room Number Device Name menu is
launched, enter the room number.
Enrollment Status in LYNK Cloud is set to ON.
Refer to the manual of each solution for details about functions and settings of the solutions such as .
English - 29
USB Cloning
Admin menu > Cloning
The USB cloning function lets you download user-configured settings (Picture, Sound, Broadcasting, Admin menu and
so on) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you
create a standard file of settings and distribute that standard file to all the TVs in your facility.
After cloning, certain features are applied when the TV is turned on again.
Cloning TV to USB: Copies stored menu settings from a TV to a USB device
Admin menu > Cloning > Clone TV to USB
1. Insert a USB device into the USB port on the rear of the TV.
2. Go to the Admin menu.
3. Press the up or down directional button to select Clone TV to USB, and press the Select button on the remote
control.
– The clone folder will be labelled T-KTS2DEUC.
– The cloned values include the values on the guest side menu (Picture, Sound, Broadcasting and so on) and the
Admin menu.
Cloning USB to TV: Copies menu settings and channel data in a USB device to a TV
To clone data to the TV using the Admin menu, follow these steps:
1. Turn the TV off.
2. Insert the USB device into the USB port on the rear of the TV.
3. Turn the TV on.
4. Go to the Admin menu.
5. Press the up or down directional button to select Clone USB to TV, and press the Select button on the remote
control.
6. The message Clone settings from USB to TV is displayed. Press the Select button on the remote control.
– If there is no file to copy on the USB device or the message that there is no file appears, check the folder on your
USB device.
– The folder name should be T-KTS2DEUC.
– Tables that list the settings that are cloned in the Admin menu begin on the next page.
"Turn the TV off, insert the USB device, turn the TV on, and press the Select button on the remote control for 5
seconds, then this menu is displayed.
Pre-condition for cloning (check point)
Cloning should be done between same model (same SW version).
Before cloning, all displays should be updated at the latest version (same SW version).
English - 30
Settings Cloned in the Admin menu
The menu items may not be supported depending on the models.
Menu Item Sub Item Cloned or not
SI Vendor OFF / Movielink / Swisscom
Power On
Power On Channel
Power On Channel Num
Power On Channel Type
Power On Volume
Power On Volume Num 0~100
Min Volume 0~100
Max Volume 0~100
Power On Source
Saved
Power On Option
Channel
Channel Setup
Channel Editor
Mixed Channel Map ON / OFF
ON / OFF
Channel Rescan Message ON / OFF
MyChannel ON / OFF
Subtitle Auto On ON / OFF
TTX Widescreen Mode ON / OFF
Broadcasting Sel
ON / OFF
ON / OFF
ON / OFF
Clock
Standalone: Manual / Time Channel / TTX
Time Channel Type
Time Channel Num
External Source USB Pop-up Screen
Eco Solution Power Saving Mode ON / OFF
Cloning
Clone TV to USB No
Clone USB to TV No
ON / OFF
English - 31
Menu Item Sub Item Cloned or not
Smart Service
Network Setup No
Terms & Policy
Smart Features : ON / OFF
Quick Settings Editor
Samsung Account No
Security
ON / OFF
Password Popup ON / OFF
Password Input No
Password Setting
Password Reset No
Security Mode ON / OFF
USB
TTX Security
System
No
System Manger No
OTN Update ON / OFF
SW Update No
About This TV No
ON / OFF
TV Reset No
Enrollment No
Enrollment Status Connected to the lynk cloud: Active / Not Active
Not connected to the lynk cloud: Failure No
Virtual Standby Virtual Standby Mode ON / OFF No
Reboot Time OFF / 5 / 15 / 30 / 60
Room Number No
English - 32
Setting Auto Initialize
OAdmin menu > Cloning > Setting Auto Initialize
When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings:
Picture, Sound, Broadcasting, Admin menu and so on. This lets you set nearly all of the menu values on your hospitality
TVs to the same, standard settings. If you allow guests access to the guest side menus, for example the Picture menu,
they can change the settings in those menus so they are no longer standard. If you set the Setting Auto Initialize
when the TV is turned off and then turned on again. Note that Setting Auto Initialize works on cloned guest side menu
values only. Then unplug the TV's power cord, wait for the power indicator to go off, and then plug the TV's power cord in
again. Settings which have not been cloned are ignored.
The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize
function to on.
The menu items may not be supported depending on the models.
Menu Item
Picture
Picture Mode
Fit to screen
Expert Settings
Brightness
Contrast
Sharpness
Colour
Tint (G/R)
Apply Picture Settings
Picture Clarity Settings
Picture Clarity
Judder Reduction
Noise Reduction
Contrast Enhancer
Film Mode
Colour Tone
English - 33
Menu Item
Picture Expert Settings
White Balance
2 Point
R-Gain
G-Gain
B-Gain
R-Offset
G-Offset
B-Offset
20 Point Settings
20 Point
Interval
Red
Green
Blue
Gamma
ST.2084
BT.1886
RGB Only Mode
Colour Space Settings
Colour Space
Colour
Red
Green
Blue
Sound
Sound Output
Sound Mode
Expert Settings
Balance
Equaliser
Auto Volume
Sound Feedback
Broadcasting Expert Settings Audio Options
Settings
Primary Audio
Secondary Audio
Audio Format
English - 34
Menu Item
General
System Manager Time Clock
Clock Mode
Time Zone
Manager
Game Mode
Game Mode Settings
Game Mode
Game Motion Plus
Settings
Game Motion Plus
Blur Reduction
Judder Reduction
Input Signal Plus
Eco Solution
Auto Power Off
Minimum Brightness
Accessibility
Greyscale
Colour Inversion
Enlarge
English - 35
Updating the TV’s Software
the software update. Video and audio settings will be reset to their defaults after a software update. To easily reset the
settings after software update, we recommend you to copy the TV's settings.
For more information about the USB cloning function, refer to page 30.
Updating through a USB device
To update the TV's software, follow these steps:
1. Insert a USB device containing the software update file into the USB port of the TV.
2. Run SW Update.
– Admin menu > System > SW Update
3. The TV displays a pop-up message that checks for the updated version.
4. Move the focus to OK, and then press the Select button on the remote control.
– Please be careful to not disconnect the power or remove the USB device while upgrades are being applied. The
TV will turn off and turn on automatically after completing the SW upgrade. Please check the SW version after the
upgrades are complete.
English - 36
09 Editing Channels
Using Channel Editor
OAdmin menu > Channel > Channel Editor
Using Channel Editor you can edit the channels stored in the TV's memory.
Change the channel numbers and names, edit the channel language and channel genre and delete channels.
If you set the Screen Off function to On for the selected channels, a screen off message is displayed, and pictures
are turned off by the Screen Off function and only audio is output from those channels.
Channel Editor also lets you view information about each channel easily, without your having to display each
channel directly.
General Steps for Using the Channel Editor in Standalone Mode
– The image on your TV may differ from the image above depending on the model and geographical area.
1. Run Channel Setup (Channel > Channel Setup) in the Admin menu.
2. Enter Channel Editor (Channel > Channel Editor) in the Admin menu.
3. On a piece of paper, compile a list of channels you want to have, arranged in the order you want.
4. Based on the list created in Step 3, rearrange the channels and edit the channel names.
5. Press the button to exit.
English - 37
Editing the Channel Number
Change the channel number of a channel you select. To change a channel number, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Use the directional buttons on the remote control, move the focus to Edit Channel Number, and press the Select
button.
3. Use the up or down directional buttons on the remote control to change the channel number.
4. Move the focus to OK when done, and then press the Select button on the remote contorl.
– When you change the channel number, the channel information is updated automatically.
Rename the Channel
Change the name of a channel you select. To change the name of a channel, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Use the directional buttons on the remote control, move the focus to Rename channel, and then press the Select
button.
3. Use the on-screen keyboard that appears to enter the new name for the channel. Use the directional buttons on
the remote control, move the focus a letter or number, and then press the Select button. Repeat for each letter or
number you want to enter.
4. When finished, move the focus to Done, and then press the Select button on the remote control.
English - 38
Assigning the Channel Number to the external device
The external device source of the TV are displayed in the last page of the Channel Editor menu as shown below.
>
1. Select a external device source on the Channel Edit screen.
2. Use the directional buttons on the remote control, move the focus to Edit Channel Number, and press the Select
button.
3. Use the up or down directional buttons on the remote control to assign the channel number.
4. Move the focus to OK when done, and then press the Select button on the remote control.
– Once you assign a channel number to an external device, you can enter the external device without opening the TV
source menu.
English - 39
10 Specifications and Other Information
Specifications
Model Name
Display Resolution 1920 x 1080
Screen Size
Measured Diagonally
32 inches
80 cm
Sound (Output) 10 W
Dimensions (W x H x D)
Body
With stand
737.4 x 438.0 x 74.1 mm
737.4 x 465.4 x 150.5 mm
Weight
Without Stand
With Stand
4.0 kg
4.1 kg
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Notes
This device is a Class B digital apparatus.
The design and specifications are subject to change without prior notice.
For information about the power supply, and more information about power consumption, refer to the label-rating
attached to the product.
the cover terminal.)
Typical power consumption is measured according to IEC 62087.
1. Go to https://eprel.ec.europa.eu
2. Get the model identifier from the energy label of the product and type it in the search box
3.
The registration no. can be found on the rating label on your product.
Decreasing power consumption
When you shut the TV off, it enters Standby mode. In Standby mode, it continues to draw a small amount of power. To
decrease power consumption, unplug the power cord when you don't intend to use the TV for a long time.
English - 40
Supported Resolutions for Connecting a Computer
When you use your TV as a computer monitor, you can also select one of the standard resolutions listed in the
Resolution column. The TV will automatically adjust to the resolution you choose.
Mode Resolution Display
format
Horizontal
frequency (KHz)
Vertical frequency
(Hz)
Clock frequency
(MHz)
Polarity (horizontal
/ vertical)
IBM 720 x 400 70 31.469 70.087 28.322 -/+
MAC
640 x 480 67 35.000 66.667 30.240 -/-
832 x 624 75 49.726 74.551 57.284 -/-
1152 x 870 75 68.681 75.062 100.000 -/-
VESA DMT
640 x 480 60 31.469 59.940 25.175 - / -
640 x 480 72 37.861 72.809 31.500 - / -
640 x 480 75 37.500 75.000 31.500 - / -
800 x 600 60 37.879 60.317 40.000 + / +
800 x 600 72 48.077 72.188 50.000 + / +
800 x 600 75 46.875 75.000 49.500 + / +
1024 x 768 60 48.363 60.004 65.000 - / -
1024 x 768 70 56.476 70.069 75.000 - / -
1024 x 768 75 60.023 75.029 78.750 + / +
1152 x 864 75 67.500 75.000 108.000 + / +
1280 x 720 60 45.000 60.000 74.250 + / +
1280 x 800 60 49.702 59.810 83.500 - / +
1280 x 1024 60 63.981 60.020 108.000 + / +
1280 x 1024 75 79.976 75.025 135.000 + / +
1440 x 900 60 55.935 59.887 106.500 - / +
1600 x 900 60 60.000 60.000 108.000 + / +
1680 x 1050 60 65.290 59.954 146.250 - / +
1920 x 1080 60 67.500 60.000 148.500 + / +
VESA CVT 2560 x 1440 60 88.787 59.951 241.500 + / -
2560 x 1440 120 192.996 119.998 497.750 + / -
CTA-861
100 112.500 100.000 297.000 + / +
120 135.000 120.003 297.000 + / +
3840 x 2160 30 67.500 30.000 297.000 - / -
60 135.000 60.000 594.000 - / -
100 225.000 100.000 1188.000 + / +
120 270.000 120.000 1188.000 + / +
100 225.000 100.000 1188.000 + / +
120 270.000 120.000 1188.000 + / +
The interlaced mode is not supported.
The set might operate abnormally if you select a non-standard video format.
Separate and Composite modes are supported. SOG (Sync On Green) is not supported.
Set Apps Editable to ON to change the input source (Edit Name/Icon) manually.
– Admin menu > Smart Service > Apps Editable
English - 41
Supported Resolutions for Video Signals
Check the resolutions supported for video signals.
Mode Resolution Display
format
Horizontal
frequency (KHz)
Vertical frequency
(Hz)
Clock frequency
(MHz)
Polarity (horizontal
/ vertical)
CTA-861
720 (1440) x 576i 50 15.625 50.000 27.000 - / -
720 (1440) x 480i 60 15.734 59.940 27.000 - / -
720 x 576 50 31.250 50.000 27.000 - / -
720 x 480 60 31.469 59.940 27.000 - / -
1280 x 720 50 37.500 50.000 74.250 + / +
1280 x 720 60 45.000 60.000 74.250 + / +
1920 x 1080i 50 28.125 50.000 74.250 + / +
1920 x 1080i 60 33.750 60.000 74.250 + / +
1920 x 1080 24 27.000 24.000 74.250 + / +
1920 x 1080 25 28.125 25.000 74.250 + / +
1920 x 1080 30 33.750 30.000 74.250 + / +
1920 x 1080 50 56.250 50.000 148.500 + / +
100 112.500 100.000 297.000 + / +
120 135.000 120.003 297.000 + / +
1920 x 1080 60 67.500 60.000 148.500 + / +
3840 x 2160 24 54.000 24.000 297.000 + / +
3840 x 2160 25 56.250 25.000 297.000 + / +
3840 x 2160 30 67.500 30.000 297.000 + / +
50 112.500 50.000 594.000 + / +
60 135.000 60.000 594.000 + / +
100 225.000 100.000 1188.000 + / +
120 270.000 120.000 1188.000 + / +
4096 x 2160 24 54.000 24.000 297.000 + / +
4096 x 2160 25 56.250 25.000 297.000 + / +
4096 x 2160 30 67.500 30.000 297.000 + / +
50 112.500 50.000 594.000 + / +
60 135.000 60.000 594.000 + / +
100 225.000 100.000 1188.000 + / +
120 270.000 120.000 1188.000 + / +
VESA CVT 2560 x 1440 60 88.787 59.951 241.500 + / -
2560 x 1440 120 192.996 119.998 497.750 + / -
Set Apps Editable to ON to change the input source (Edit Name/Icon) manually.
– Admin menu > Smart Service > Apps Editable
English - 42
Dimensions
Front view / Side view
The displayed image may differ from your TV, depending on the model.
(Unit: mm)
737.4
700.4
394.9 465.4
150.5
74.1
803.3
English - 43
Base Stand detail
The displayed image may differ from your TV, depending on the model.
(Unit: mm)
49.5
150.5
150.2
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer
to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.
English - 44
Licences
CONTENT.
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com)
English - 45