Samsung HG43ED690MBXXU User Manual
Displayed below is the user manual for HG43ED690MBXXU by Samsung which is a product in the Hospitality TVs category. This manual has pages.
Related Manuals
Thank you for purchasing Samsung product.
To receive more service, please register your
product at
www.samsung.com/register
Model Serial No.
LED TV
Installation manual
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance. Product design and specifications may be changed without notice.
Instruction
This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computer-
controlled system for hotels and other hospitality businesses.
Interactive: When the TV is powered-up initially, it sends a command to identify the SBB/STB; if identified, theTV switches to ONLINE mode
and full control is through the SBB/STB.
If the TV is in ONLINE mode, it stops receiving IR(Samsung remote) commands and acts according to interface protocol.
Stand-Alone: If SBB/STB is not identified, the TV should be switched to STAND-ALONE mode with restricted operation.
Operational Modes
When this TV (in Hotel mode) is operated with a SBB/STB, it is in one of two states :
•ONLINE or STAND-ALONE. In the STAND-ALONE state, the TV will act as a Hotel TV, but without active communication. This is to prevent
guests from trying to cheat the system by disconnecting the SBB/STB.
Power
ON
Hotel TV
Online Mode
Poll Rate 20/sec
Stand-alone Mode
Hotel Mode On SBB/STB Online if
one success within
10 attempts SBB/STB
Online-10
consecutive
fails
SBB/STB
Status-
Attempt every
2secs
To set the details for Stand-alone or interactive mode, refer to pages 25-28(Setting the hotel option data : Stand-alone mode and Interactive
mode)
•Some operations may be restricted to prevents guests from "cheating" the TV system.
•No main menu(Interactive mode) or Channel Menu, Plug & Play in Main Menu (Stand-Alone mode)
•Limited Volume and Panel key lock or unlock
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV Program logo, panorama or 4:3 image format, stock or news
bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause uneven wear of screen phosphor, which will affect
image quality. To reduce risk of this effect, please follow below recommendations:
•Avoid displaying the same TV channel for long periods.
•Always try do display any image on full screen, use TV set picture format menu for best possible match.
•Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout
process.
•Frequently use all TV features designed to reduce image retention and screen burnout. Refer to the relevant user manual section for details.
Securing the Installation Space
Keep required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature.
•When using a stand or wall-mount, use parts provided by Samsung Electronics only.
– Using parts provided by another manufacturer may result in a problem with the product or injuries due to the product falling.
•The appearance may differ, depending on the product.
Installation with a stand. Installation with a wall-mount.
10 cm10 cm
10 cm
10 cm10 cm
10 cm
10 cm
3
Contents
ENGLISH
English
yInstruction ................................................................................................................................................ 2
yOperational Modes .................................................................................................................................. 2
yStill image warning ................................................................................................................................... 2
ySecuring the Installation Space ................................................................................................................ 2
yAccessories ............................................................................................................................................. 4
yInstalling the LED TV Stand ...................................................................................................................... 5
yAssembling the swivel (32 inch TVs or larger) ........................................................................................... 7
yViewing the Connection Panel .................................................................................................................. 9
yTV Controller ............................................................................................................................................ 12
yViewing the Remote Control ..................................................................................................................... 13
ySamsung Smart Control (sold separately) ................................................................................................. 15
yConnecting the TV with SBB .................................................................................................................... 18
yConnecting the Bathroom Speakers ........................................................................................................ 19
yConnecting the MediaHub HD ................................................................................................................. 21
yConnecting the RJP (Remote Jack Pack) ................................................................................................. 22
yConnecting to a COMMON INTERFACE slot (Your TV viewing Card Slot) ................................................. 24
ySetting the Hotel Option Data .................................................................................................................. 25
yInstalling the Wall Mount .......................................................................................................................... 67
ySecuring the TV to the Wall ...................................................................................................................... 68
yAnti-theft Kensington Lock ....................................................................................................................... 68
ySpecifications .......................................................................................................................................... 69
yDimensions .............................................................................................................................................. 70
4
English
Accessories
✎Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
✎The items’ colour and shapes may vary depending on the model.
• Remote Control & Batteries (AAA x 2)
• Samsung Smart Control (sold separately)
• Quick Set up Guide
• CI Card Adapter
• Hotel Mount Kit
• Power Cord / Data Cable
• Owner’s Instructions
Safety Guide (Not available in all locations)
• Cable Holder
✎The stand and stand screw may not be included, depending on the model.
✎The Data Cable may not be included, depending on the SI Vendor.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of
their working life. To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate these items from other types of waste and recycle them responsibly to promote
the sustainable reuse of material resources. Household users should contact either the retailer where they
purchased this product, or their local government office, for details of where and how they can take these
items for environmentally safe recycling. Business users should contact their supplier and check the terms
and conditions of the purchase contract. This product and its electronic accessories should not be mixed with
other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return
systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be
disposed of with other household waste at the end of their working life. Where marked, the chemical symbols
Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human
health or the environment. To protect natural resources and to promote material reuse, please separate
batteries from other types of waste and recycle them through your local, free battery return system.
5
English
Installing the LED TV Stand
The 32” and larger LED TVs have swivel stands. You can set these stands so that the TVs swivel 20 degrees left and right or
90 degrees left and right.
Stand Components
When installing the stand, use the provided components and parts.
28" 32" ~ 55"
1 EA
A
B
1 EA
28"
32"
40" ~ 55"
C
D
28" ~ 32"
40" ~ 55"
x7 (M4 X L12)
x8 (M4 X L12)
Stand Guide Stand Screws
HG28ED690
3
Tight the bottom of the screw first, and stow the upper side of
screw last.
4
When the declination happened, try reassemble it
2
category.
✎Make sure to assembling stand guide attached on the TV.
C
(M4 X L12)
x3
2
✎Place a soft cloth over the table to protect the TV, and then place
the TV on the cloth screen-side down.
✎Insert the Stand Guide into the slot on the bottom of the TV.
✎Slide and assemble it to the end line in the direction of arrow.
3-1 3-2
✎Progress the assembly of screw in the manual’s order.
2-32-1 2-2
1
A
B
C
(M4 X L12)
x4
1-1
1-2
1-3
6
English
HG32ED690 / HG40ED690 / HG48ED690 / HG55ED690
Tight the bottom screw first, and upper screw last.
When the declination happened, try reassemble it
2
category.
✎Make sure to assembling stand guide attached on the TV.
✎Place a soft cloth over the table to protect the TV, and then
place the TV on the cloth screen-side down.
✎Insert the Stand Guide into the slot on the bottom of the TV.
✎Slide and assemble it to the end line in the direction of arrow.
3-1
3-2
✎Progress the assembly of screw
in the manual’s order.
2-32-1 2-2
C
(M4 X L12)
x4
A
1-1
1-3
1-2
B
C32"
x3 (M4 X L12)
D40" ~ 55"
x4 (M4 X L12)
1
3
4
2
✎NOTE
• Make sure to distinguish between the front and back of each component when assembling them.
• Make sure that at least two persons lift and move the TV.
7
English
Assembling the swivel (32 inch TVs or larger)
]WARNING: If you configure the TV to swivel, you must attach it securely to the floor, a desk, a dresser top, etc. as
described in the installation instructions.
The 32” and larger LED TVs have swivel stands. You can configure these stands so that the TVs swivel 20 degrees left and
right, 60 degrees left and right, or 90 degrees left and right using the BRACKET HOLDER SWIVEL.
¦20° Swivel
To configure the TV so that it swivels 20° left and right, insert the prong on the bottom of the stand through the curved hole
in the Bracket Holder Swivel marked 20°. Then, fix the Bracket Holder Swivel to the stand using the three supplied screws
as shown below.
¦60° Swivel
To configure the TV so that it swivels 60° left and right, insert the prong on the bottom of the stand through the curved hole
in the Bracket Holder Swivel marked 60°. Then, fix the Bracket Holder Swivel to the stand using the three supplied screws
as shown below.
¦90° Swivel
To configure the TV so that it swivels 90° left and right, remove the Bracket Holder Swivel, and then screw the three supplied
screws into the stand as shown below.
8
English
¦Hotel Mount Kit
Bolt + Nut
Short Bolt (2EA) Long Bolt (2EA) Nut (2EA) Washer (2EA)
Top
Bottom
Affix the stand to a flat surface such as a
dresser top, desk top, or entertainment centre as
shown.
[
WARNING: To prevent injury, you must attach this TV securely to the floor, a table, a dresser top, etc. with
the Hotel Mount Kit as described in these instructions.
9
English
Viewing the Connection Panel
HG32ED690**
HG40ED690**
HG48ED690**
HG55ED690**
HG28ED690**
CLOCK
DIGITAL
AUDIO OUT
(OPTICAL)
HDMI IN 3
(DVI)
HDMI IN 2
(ARC)
HDMI IN 1
LAN
1
2
6
7
8
3
4
5
0
!
@
#
$%
3
9
CLOCK
DIGITAL
AUDIO OUT
(OPTICAL)
HDMI IN 3
(DVI)
HDMI IN 2
(ARC)
HDMI IN 1
LAN
1
2
6
7
8
3
4
5
0
!
@
#
$%
3
9
✎Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
✎When connecting an external device, match the colour of the connection terminal to the cable.
1
AV IN
– Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on an A/V
device.
– Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of the TV set and the other ends to
corresponding audio out jacks on the external device.
– When connecting to AV IN, the colour of the AV IN [Y/VIDEO] jack (Green) does not match the colour of the video
cable (Yellow).
10
English
2
USB (5V 0.5A), USB (HDD/1.0A) / CLONING
– Connector for software upgrades and Media Play, etc.
– Service connection.
3
HDMI IN 1, 2(ARC), 3(DVI)
Connects to the HDMI jack of a device with an HDMI output.
✎No sound connection is needed for an HDMI-HDMI connection. HDMI connections carry both audio and video.
✎Use the HDMI IN 3(DVI) jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for the video connection and the PC/DVI AUDIO IN jacks for audio.
4
LAN
Connect to a wired LAN using CAT 7 cable.
5
ANT IN (SATELLITE), (AIR/CABLE)
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system
6
HEADPHONE JACK
Headphones may be connected to the headphone jack on your TV. While the headphones are connected, the sound
from the built-in speakers is disabled.
7
RJP
This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional
modules to improve device use and convenience.
Display Modes
You can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the
resolution you choose.
After connecting a computer to the TV, set the screen resolution for the TV on the computer. The optimal resolution is 1920
x 1080 @ 60 Hz. If it is set to any other than in the table below, the TV may display nothing. Set the resolution properly,
referring to the user guide of the computer or its graphic card.
The resolutions in the table are recommended.
✎Optimal resolution is 1366 X 768 @ 60 Hz.
Mode Resolution Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz) Sync Polarity (H / V)
IBM 640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-
-/+
MAC 640 x 480
832 x 624
35.000
49.726
66.667
74.551
30.240
57.284
-/-
-/-
VESA CVT 720 x 576
1280 x 720
35.910
56.456
59.950
74.777
32.750
95.750
-/+
-/+
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 720
1366 x 768
31.469
37.500
37.861
37.879
46.875
48.077
48.363
56.476
60.023
45.000
47.712
59.940
75.000
72.809
60.317
75.000
72.188
60.004
70.069
75.029
60.000
60.015
25.175
31.500
31.500
40.000
49.500
50.000
65.000
75.000
78.750
74.250
85.500
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
+/+
+/+
VESA GTF 1280 x 720 52.500 70.000 89.040 -/+
11
English
✎Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode Resolution Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock
Frequency
(MHz)
Sync Polarity
(H / V)
IBM 720 x 400 31.469 70.087 28.322 -/+
MAC
640 x 480
832 x 624
1152 x 870
35.000
49.726
68.681
66.667
74.551
75.062
30.240
57.284
100.000
-/-
-/-
-/-
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 720
1280 x 800
1280 x 960
1366 x 768
1440 x 900
1600 x 900RB
1680 x 1050
1920 x 1080
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
60.000
47.712
55.935
60.000
65.290
67.500
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
60.000
60.015
59.887
60.000
59.954
60.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
108.000
85.500
106.500
108.000
146.250
148.500
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
+/+
+/+
+/+
+/+
-/+
+/+
+/+
-/+
+/+
-/+
+/+
✎When using an HDMI/DVI cable connection, you must use the HDMI IN 3(DVI) jack.
✎The interlace mode is not supported.
✎The set might operate abnormally if a non-standard video format is selected.
✎Separate and Composite modes are supported. SOG is not supported.
8
PC/ DVI AUDIO IN
Connects to the audio input jacks on an Amplifier/Home Theatre.
9
PC IN
Connect to the video output jack on your computer.
0
VOL-CTRL
Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOLCTRL port.
!
VARIABLE AUDIO OUT
Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the Variable port (RCA).
@
CLOCK
Set the time after connecting the cable of the External Clock to Clock jack. You can use the External Clock Display
function.
#
DATA
– Used to support data communication between the TV and the SBB.
– Connects using RJ-12 TV type plugs.
$
DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component.
%
HP-ID
Connect the cable to HP-ID and Headphone Jack simultaneously and connect it to separated Headphone Box. See
page 20. When connecting Headphone to Headphone Box, it works same as Headphone function.
12
English
TV Controller
TV Controller is a multi directional button that helps navigate without using the remote control.
✎Some functions which require a PIN code may not be available.
✎The product colour and shape may vary, depending on the model.
✎Exits the menu when pressing the controller for more than 1 second.
✎When selecting the function by moving the controller to the up/down/left/right directions, do not press the controller. If
the controller is used first, you cannot operate it to move the up/down/left/right directions.
TV Controller
Function menu
Remote control sensor
The image is drawn by facing
the front side of the TV.
Power on Turn the TV on by pressing the controller in standby mode.
Adjusting the volume Adjust the volume by moving the controller from side to side when the power is on.
Selecting a channel Select a channel by moving the controller up and down when the power is on.
Using the function menu Press the controller when the power is on and the function menu appears. If you press
it again, the function menu screen disappears.
Using the Menu Selects the MENU(m) by moving the controller in the function menu screen. The
OSD(On Screen Display) of your TV’s feature appears.
Selecting the Source Selects the Source(s) by moving the controller in the function menu screen. The
Source list screen appears.
Selecting the SMART HUB
( ™ )
With the Function menu visible, select SMART HUB (™) by moving the Controller
upwards. The SMART HUB main screen appears. Select an application by moving the
Controller, and then pressing the Controller.
Power Off Selects the Power Off(P) to turn the TV off by moving the controller in the function
menu screen.
✎To close the Menu, SMART HUB, or Source, press the Controller for more than 1 second.
Standby mode
Do not leave your TV in standby mode for long periods of time a small amount of electric power is still consumed even when
the power button is such as when on holiday. off. It is best to unplug the power cord.
13
English
Viewing the Remote Control
✎This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually
impaired persons.
CONTENT
CLOCK
ALARM
SOURCE
GUIDE
HOME
Turns the TV on and off.
Have direct access to channels.
Alternately selects Teletext, Double
or Mix.
Adjust the volume.
Display channel list on the screen.
Display the main on-screen menu.
Quickly select frequently used
functions.
Select on-screen menu items and
change menu values.
Return to the previous menu.
Buttons in the Channel list,
Contents Home menu, etc.
Use these buttons in the Contents
Home.
Display and select available video
sources.
Electronic Programme Guide (EPG)
display.
Cut off the sound temporarily.
Change channels.
Switch to the HOME Screen.
View the Contents Home.
Press to display information on the
TV screen.
CLOCK: When you press INFO key
in standby mode, TV screen displays
the time.
Exit the menu.
ALARM: Enter the hour you want the
TV to turn on.
X: Turns the 3D image on or off.
( Not available )
SUBT.: Displays digital subtitles.
14
English
Installing batteries (Battery size: AAA)
X
Z
Y
✎NOTE
• Use the remote control within 7m of the TV.
• Bright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon
signs.
• The colour and shape may vary depending on the model.
• Remote control button 'HOME' & '3D' are not supported. When pressing these buttons, the TV unit does not
respond.
15
English
Samsung Smart Control (sold separately)
✎Colours and shape may vary depending on the model.
¢: Turns the sound on/off.
AD: Press and hold this button
to bring up the Accessibility
Shortcuts panel. Select the
options to turn them on or off.
MIC: Use the microphone with the Voice Control and Voice functions.
– The Voice Control function can be affected by unclear pronuncia-
tion, voice level, or surrounding noise.
Turns the TV on/off.
SEARCH: Press this button to use the search window. (Not availabl)
KEYPAD: With the virtual remote control on the screen, you can easily
enter digits, control content, and use functions.
SOURCE: Changes the source.
VOICE: Starts voice recognition. When the microphone icon appears on
the screen, say a voice command into the microphone. Say "Help" to
learn about basic usage and voice commands.
– Say a voice command 10cm to 15cm from the microphone and at
an appropriate volume.
Changes the channel.
Changes the volume.
– Touchpad: Place a finger on the touch pad and move the Samsung
Smart Control. The pointer on the screen moves in the direction
and as much as the Samsung Smart Control is moved. Press the
touchpad to run the focused item.
– < > ¡ £: Moves the pointer or focus.
RETURN: Returns to the previous menu. Additionally, when you press
this button while watching TV, you can return to the previous channel.
EXIT: Press and hold this button to exit all currently running applications.
SMART HUB: Launches Smart Hub. Pressing SMART HUB while an
application is running terminates the application.
GUIDE: Displays the digital channel broadcasting schedule.
Channel List: Press and hold to launch the Channel List.
Use these buttons with specific features. Use these buttons according to
the directions on the TV screen.
Colours button: Use these colour buttons to access additional options specific to the feature in use.
– MENU: Press and hold to display a menu on the screen.
– REC: Press and hold to record the broadcast.
– INFO: Press and hold to view information about the current digital channel or media file.
¥:Enable Football Mode for an optimal sports viewing experience.
M.SCREEN: You can split the TV screen and use various functions such as watching TV, surfing the web, watching
video, and so on. For more information, refer to the e-Manual.
16
English
Inserting Batteries into Samsung Smart Control
To use Samsung Smart Control, first refer to the figure below and insert batteries into the unit.
Gently pull on the battery cover's notch and then remove the cover completely once it comes loose.
Insert 2 AA alkaline batteries, making sure to align the positive and negative polarities correctly.
¦Using the Samsung Smart Control
Samsung Smart Control makes it even easier and more convenient to use the TV. Pressing the KEYPAD button displays a
virtual remote control that allows you to easily enter digits, control content, and activate functions on the screen.
– We recommend using Samsung Smart Control at a distance of less than 6m. A usable distance may differ depending
on the wireless environmental conditions.
Pairing the Samsung Smart Control
To control the TV with Samsung Smart Control, you need to pair Samsung Smart Control to the TV via Bluetooth. Pair
Samsung Smart Control to the TV.
– Samsung Smart Control can only be paired to a single TV.
Point Samsung Smart Control at the remote control sensor of the TV and press the TV button to turn the TV on.
– Remote control receiver’s location may vary depending on the model.
Reconnecting Samsung Smart Control
If the Samsung Smart Control stops operating or works abnormally, replace the batteries as this may be due to insufficient
battery power.
If the problem persists, the Samsung Smart Control restores pairing with the TV.
1. Press RETURN button and GUIDE button simultaneously for 3 seconds.
– You must place the Samsung Smart Control approximately 30cm ~ 40cm away from the TV and ensure it is
pointing towards the remote control receiver.
2. Connection image is appeared on the screen. And then, Samsung Smart Control is connecting to TV automatically.
17
English
When you see this alarm icon on the screen...
Following alarm icon indicates Samsung Smart Control's batteries are low. If the alarm
icon pops up, replace the batteries. Samsung recommends using alkaline batteries for a
longer operating life.
<Low battery Alarm Icon>
Using the TV by Moving the Samsung Smart Control
The Samsung Smart Control has a motion sensor (gyro sensor) that allows you to easily control the TV by holding and
moving the Samsung Smart Control.
After placing a finger on the touchpad, a pointer appears on the screen. Hold and move the Samsung Smart Control. The
pointer moves the same way the Samsung Smart Control is moved. It's also possible to scroll up and down on scrollable
screens.
– If you remove the finger from touchpad, the screen pointer disappears.
Using the TV with the Touchpad
Navigate to the Support menu and select the Smart Control Tutorial option to learn how to use the touchpad, following
the on screen instructions.
Moving the Focus/Pointer
Press the directional buttons (up, down, left, and right) to move the pointer or focus in the direction.
Menu Access & Item Selection
Press the touchpad. This lets you access a TV menu or select an item.
Displaying the Context-sensitive Menu on Smart Hub
Press and hold on the touch pad from the Smart Hub screen. The Options menu available to the selected item appears.
– The Options menu depends on the context.
Moving to the Smart Hub panel
On the Smart Hub screen, drag left or right on the touchpad. This will move the Smart hub panels left or right.
Scrolling on the Web Browser
Drag up/down on the touchpad in the web browser screen. This scrolls through the web screen.
18
English
Connecting the TV with SBB
CLOCK
CL
O
CK
ETH MODEM
TV Rear Panel
Data Cable
1. Connect the DATA jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the Data cable.
✎Use data communication.
¦List of Vendors and Compatible Data Cables Supplied with the TV
• Confirm that you are using the correct data cable for your vendor. Refer to the code label on the data cables.
CON BCON A
1
6
6
1
STB SIDETV SIDE
CON A
6: NC
5: IR
4: GND
3: Rx
2: Tx
1: Nc
1: NC
2: GND
3: Rx
4: NC
5: Tx
6: IR
CON B
CON ACON B
65
24
53
32
19
English
Connecting the Bathroom Speakers
You can connect the Bathroom Speakers using the following method.
¦Connecting through the Variable Output (available without an external amplifier)
C
C
VOL+
VOL
-
TV Rear Panel
Volume Control Box
Speaker
2
1
1. Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel.
Speaker +
Speaker - N/C
2. Connect the VOL-CTRL jack of the TV to the Volume Control Box Switch port on the Bathroom Wall of the hotel.
✎The maximum speaker output is 4W, 8Ω.
✎The VARIABLE AUDIO OUT port supports MONO sound out only.
• Installing the Volume Control
– If you configure the Volume Control Box as shown in the figure, you can control the volume of the bathroom
speakers.
– The jack that connects the Volume Control Box to the TV is a 3.5mm normal Phone jack.
– Volume Control Box switch is a Tact switch.
– Setting the Sub AMP Mode
– 0: Turns the Sub AMP function off (PWM off).
– 1: Determines the Sub volume according to the main volume control. the sub volume is determined according to
the Power On Volume, the Min Volume, and the Max Volume values of Hotel Mode.
– 2: Determines the volume according to the bathroom control panel setting.
• Variable Output Port Specifications
– Speaker Wire: Use speaker cable no more than 82 feet (25m) in length.
Volume Control Box
VOL - DOWN
( White
1
)
VOL - UP
( Black /Red
2
)
GND
( Shield Wire
3
)
VOL +
VOL
-
1
2
3
20
English
¦Audio Loop In
An additional Headphone Box can be installed on a bed or business desk for added convenience. The installation
procedures are given below.
• Detailed Drawing of the Headphone Box.
HEADPHON BOX
TV Rear Panel
Headphone Box
TV Headphones jack
Whitewire (Audio-L)
Shield Wire
TV HP-ID jack
Red wire + White wire
Red Wire (Audio-R)
Shield wire
<Headphone Box>
21
English
Connecting the MediaHub HD
Output to any external source connected to MediaHub HD on the hotel desk.
CLOCK
DIGITAL
AUDIO OUT
(OPTICAL)
HDMI IN 1
LAN
HDMI USB RS/232
C
L
O
CK
D
I
G
ITA
L
AU
DI
O
OUT
(
OPTICAL)
LAN
HDMI IN 3
(DVI)
HDMI IN 2
(ARC)
TV Rear Panel
MediaHub HD Rear
2
HDMI cable
1
RS-232
Data Cable
1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD.
2. Connect the HDMI IN 1, 2(ARC) or 3(DVI) port of the TV and the HDMI port of the MediaHub HD.
•MediaHub HD
– The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HDMI and USB)
and corresponding outputs. The corresponding output sources connect from MediaHub to the TV. MediaHub
communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an external
source to the MediaHub. MediaHub communicates with the TV by sending messages regarding Active/Inactive
sources. The TV switches to the Active external source.
– You have to connect the HDMI of the MediaHub to the HDMI IN 3(DVI) port of the TV.
– When the TV is on, connect the TV and the RJP within 10 seconds.
• Special features
– PIP
– Auto Detection
22
English
Connecting the RJP (Remote Jack Pack)
Output to any exter nal source connected to RJP on the hotel desk.
CLOCK
DIGITAL
AUDIO OUT
(OPTICAL)
HDMI IN 1
LAN
CL
O
CK
DI
G
ITAL
AU
DI
O
OUT
(
OPTICAL
)
LAN
HDMI IN 3
(DVI)
HDMI IN 2
(ARC)
USB HDMI VIDEO AUDIOAUDIO/PC
RS/232
TV Rear Panel
RJP Rear
5
1
D-sub / PC Audio cable
2
Audio Cable
3
Video Cable
4
HDMI cable
1. Connect the PC IN / PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP.
2. Connect the AV IN [VIDEO]/[L-AUDIO-R] port of the TV to the VIDEO port of the RJP.
3. Connect the AV IN [VIDEO] port of the TV to the VIDEO port of the RJP.
4. Connect the HDMI IN 1, 2(ARC) or 3(DVI) port of the TV and the HDMI port of the RJP.
5. Connect the RJP port of the TV and the RS/232 port of the RJP.
✎The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-7660
(HD Plus).
• RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio
Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are connected
from RJP to TV. The RJP communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests
to connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding Active/
Inactive sources. The TV will switch to the Active external source according to the priority set by the User.
✎You can select HDMI IN 1, 2(ARC) or 3(DVI) and AV IN for connecting RJP.
✎When the TV is on, connect the TV and the RJP within 10 seconds.
23
English
• The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10
seconds. All LEDs blink 5 times to acknowledge that this has been finished.
• The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The
LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart. If
the guest then touches another source button, the TV will change to the selected source and the corresponding LED will
be lit.
• After an RJP Reset or a TV Power OFF/ON, it takes approx. 10 seconds to establish communications between the TV
and the RJP.
• The following table shows the approximate time in seconds to switch from the TV to the input source, based on the
priority.
✎Scenario 1: When no inputs are connected.
Source To Connect
AV 2 Sec
PC 0.7 Sec
HDMI 3.9 Sec
✎Scenario 2: When two or more inputs are connected and an Input source is disconnected and then reconnected.
Source Disconnect To Connect Total
AV 4.5 Sec 2 Sec 6.5 Sec
PC 0.7 Sec 0.7 Sec 1.4 Sec
HDMI 3.9 Sec 3.9 Sec 7.8 Sec
✎E.g. If the RJP has all its live sources AV, PC and HDMI connected, AV is viewed as the highest priority. If the RJP is
in HDMI mode, and a guest removes and reconnects the AV, the minimum time required to switch to the AV is 6.5
seconds.
• To connect audio (Ipod or Mp3), Music mode should be ON and Jack Ident detect should be OFF.
• A/V, PC and HDMI input sources are supported.
24
English
Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot)
✎Scenario 1: When no inputs are connected.
Attaching the CI Card Adapter
Attach the adapter as shown side.
✎To install the CI CARD Adapter, please remove the sticker attached to
the T V.
To connect the CI CARD Adapter, follow these steps.
✎We recommend attaching the adapter before installing the wall mount,
or inserting the “CI or CI+ CARD”.
1. Insert the CI CARD Adapter into the two holes on the product
1
.
✎Please find two holes on the rear of the TV, beside the COMMON
INTERFACE port.
2. Connect the CI CARD Adapter into the COMMON INTERFACE port on the product
2
.
3. Insert the “CI or CI+ CARD”.
We recommend that you insert the CI card before you mount the TV on a wall. It may be difficult to insert after
mounting. Insert the card after attaching the CI Card Adapter on TV. It is difficult to attach the module if you
insert the card before attaching.
Using the “CI or CI+ CARD”
To watch paid channels, the “CI or CI+ CARD” must be inserted.
• If you don’t insert the “CI or CI+ CARD”, some channels will display the
message “Scrambled Signal”.
• The pairing information containing a telephone number, the “CI or CI+
CARD” ID the Host ID and other information will be displayed in about
2~3 minutes. If an error message is displayed, please contact your
service provider.
• When the configuration of channel information has finished, the message
“Updating Completed” is displayed, indicating the channel list is updated.
✎NOTE
• You must obtain a “CI or CI+ CARD” from a local cable service provider.
• When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may
cause damage to it.
• Insert the “CI or CI+ CARD” in the direction marked on the card.
• The location of the COMMON INTERFACE slot may be different depending on the model.
• “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.
• If you have any problems, please contact a service provider.
• Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not be seen.
TV Rear
25
English
Setting the Hotel Option Data
To Enter: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order. (From the Hospitality mode, the Standalone mode
is set.)
To Exit from this menu : power off and turn on again.
✎Depending on Model and Region, some menus do not exist on the TV set.
Hotel TV Function Description
Category Item initial value
Hospitality
Mode Hospitality Mode Standalone
Select Hospitality mode.
•Interactive mode : TV works with an SI STB or SBB.
•Stand-alone mode : TV works alone, without an SI STB or SBB.
SI Vendor SI Vendor OFF
•Interactive mode : Samsung / OCC / MTI / Nstreams / Enseo / Cardinal / Guestek /
Seachange / MDC / Innvne
•Standalone mode : Smoovie
Power On
Power On Channel Last Saved
Set the default values that will be applied when the TV is turned on.
•User Defined : Lets you set Power On Channel and Channel Type manually. See Power
On Channel and Channel Type below.
•Last Saved : If you select this item, when the TV is turned on, it displays the channel it
was displaying when it was turned off.
Power On Channel Num 1 When the TV is turned on, it switches automatically to this channel.
Power On Channel Type ATV Select channel band : AIR (analogue air band), DTV (digital air band), CATV (analogue
cable band), CDTV (digital cable band)
Power On Volume Last Saved
•User Defined : Lets you set the Power On Volume manually. See Power On Volume
below.
•Last Saved : When the TV is turned on, it returns to the volume that had been set
when the power had been turned off.
Power On Volume Num 10 The TV turns on with this Volume Level in Stand Alone Hospitality mode.
Min Volume 0 The minimum Volume Level the user can set in Stand Alone Hospitality mode.
Max Volume 100 The maximum Volume Level the user can set in Stand Alone Hospitality mode.
Power on Source TV Select the input source the TV displays when turns on.
Power On Option Last Option
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
•LAST OPTION : Returns to its last Power state. If it was in Stand-by, it returns to
Stand-by. If it was on, it turns on.
•Power On : When the power returns, the TV turns on.
•Standby : When the power returns, the TV enters the Standby mode.
Channel
Channel Setup Gives you direct, immediate access to some of the Channel menu functions on the user
Channel menu such as Auto Tuning, Antenna selection, etc.
Channel Editor
The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel
Editor you can:
•Change the channel numbers and names, and sort the channels in your desired
channel number order.
•Apply the video mute to channels you select. The video mute blanks out the video from
a channel and outputs only the sound while displaying a speaker icon on the screen.
The Channel Editor also lets you view information about each channel easily, without
your having to display each channel directly.
Mixed Channel Map ON
This Feature enables showing/browsing all antenna type (Air/Cable or Satellite) channels
at the same time.
•On: When ON, guests can access the complete Channel Map irrespective of the
selected antenna type. The Channel list will also populate Air as well Cable type
channels.
•Off: When OFF, guest can access the Channel Map corresponding to the selected
antenna type [AIR/CABLE or Satellite] only. The Channel list/Editor will only show the
selected antenna type channels.
Dynamic SI OFF
•On: Check the DTV Programme channel number. (the TV channel editor is
inaccessible)
•Off: Do not check the DTV Programme channel number.
(the DTV channel editor is accessible, but additional channel Programme number
update is not supported)
Channel Rescan
Message ON
When there is a mismatch between the data in the channel map and the transmitted
data, the TV autotunes the channels to restore the data/parameters in the channel map.
•ON: When Channel Rescan Message is ON, The OSD showing that the channels are
being rescanned will be displayed to Hotel Guests.
•OFF: A Hotel Admin can turn the Channel Rescan Message OFF, if the rescan
message OSD should not to be displayed to Hotel Guests.
26
English
Hotel TV Function Description
Category Item initial value
Channel
Pan Euro MHEG OFF
•OFF: If Pan EURO MHEG is set to Off, MHEG runs according to the existing product
specifications.
•ON: If Pan EURO MHEG is set to On, MHEG is ON regardless of the product
specifications or region.
Mychannel OFF Enable or disable the Mychannel feature.
Genre Editor ... Edith the genre for channels. (Available when Mychannel is On)
Subtitle Auto On OFF
This function turns the function On/Off that automatically turns on the subtitles in a
specific country.
This function is supported for Hotel TVs that are ready to receive DVB broadcasts that is
heading to Europe.
This function is related to France’s subtitle specification. The rest of the countries’
subtitles function according to the appropriate country specifications regardless of the
Subtitle Auto On function.
•On: When the Subtitle Auto On function is ON, it follows France’s subtitle
specifications.
•Off: When the Subtitle Auto On function is OFF, it does not follow France’s subtitle
specifications.
Menu OSD
Picture Menu Lock OFF Enable or disable the Picture Menu.
Menu Display ON •On : Main Menu display.
•Off : Main Menu No display.
Panel Button Lock Unlock
Turning the front panel (local key) operations on/off.
•Unlock : Unlocks all panel keys.
•Lock : Locks all panel keys.
•OnlyPower : Locks all panel keys except the Power panel key.
•Menu/Source : Locks the Menu and Source panel keys.
Home Menu Display ON OFF : The Home Menu is not displayed.
ON : The Home Menu is displayed.
Home Menu Editor Edit Home Menu
Home Menu Auto Start ON ON : The Home Menu is Auto Start.
OFF : The Home Menu is not Auto Start.
Clock
Clock Type OFF OFF : No clock option of Factory menu shall work. Only Main menu.
SW Clock : SW clock shall work only.
Local Time Manual
Select the method to update the clock data.
•Manual: Use clock data from DVB channel or manual clock setting When the TV is in
the stand-alone mode.
•Time Channel: Use clock data from the selected Channel type and Channel num.
Music Mode
Music Mode AV OFF
To get music output from an mp3/audio player through an AV Input Source. When on,
you can hear sound from the player through the TV even there is no video signal. The
TV’s backlight, however, remains on. And add a video signal,it works normally.
Music Mode PC OFF
To get music output from an mp3/audio player through a PC Input Source. When on,
you can hear sound from the player through the TV even there is no video signal. The
TV’s backlight, however, remains on. And add a video signal,it works normally.
Music Mode Backlight OFF Backlight On/Off option in Music mode to save energy
Remote
Jack Pack
Priority AV 1 If the jack priority is set, the corresponding source is automatically set when a jack is
inserted according to the jack priority
Priority PC 2 If the jack priority is set, the corresponding source is automatically set when a jack is
inserted according to the jack priority.
Priority HDMI 3 If the jack priority is set, the corresponding source is automatically set when a jack is
inserted according to the jack priority.
AV Option AV Select RJP AV Source (Source selection depends on Model).
HDMI Option HDMI 1 Select which HDMI source of the TV is connected to the RJP jack. (HDMI1/HDMI2/
HDMI3)
27
English
Hotel TV Function Description
Category Item initial value
External
Source
USB Pop-up Screen Default
When USB is connected to the TV,
•Default : a Popup window appears.
•Automatic : This Enters the USB content menu automatically.
•Disable : Neither the pop-up window nor the menu appears.
External Source Banner ON
Users can set External Source Banner to On or Off.
•ON : When TV power is On or the Mode changes, the TV will displays the external
source banner.
•OFF : When TV power is On or the Mode changes, the TV does not display the
external source banner.
Auto Source OFF
•OFF : Auto Source is Off.
•ON : When an external source is connected to the TV, the TV will auto-ident and
switch the input source.
•PC : Auto Ident PC Input only.
Anynet+ Return Source Power On
Src
Select the return TV source after stopping an Anynet+(HDMI-CEC) connection. (This
fuction is especially useful for the Guestlink RJP.)
Bathroom
Speaker
Sub AMP Mode 2
Determines the Sub AMP operation mode.
•0: Turns the Sub AMP function off (PWM off).
•1: Determines the Sub volume according to the main volume control.
That is, the sub volume is determined according to the Power On Volume,
the Min Volume, and the Max
•2: Determines the volume according to the bathroom control panel setting.
Sub AMP Volume 6 Sub AMP Volume level at power on initial condition.
Eco
Solution Energy Saving Off
Adjusts the brightness of the TV to recduce power consumption.
•Off: Turns off the energy saving function.
•Low: Sets the TV to low energy saving mode.
•Medium: Sets the TV to medium energy saving mode.
•High: Sets the TV to high energy saving mode.
Logo/
Message
Welcome Message OFF displays on Welcome Message.
Edit Welcome Message Edit the Welcome Message.
Hospitality Logo OFF
Turns the Hospitality logo feature On or Off, if On, when the TV isturned on, the Logo is
displayed, before the signal from the initial source, for the amount of time set in "Logo
Display Time"
Hospitality Logo DL ...
Downloads the Hospitality logo.
Hospitality logo file requirements:
•BMP or AVI files only.
•Max file size : BMP - 960 X 540. AVI - 30MB.
•The file can only be named samsung.bmp or samsung.avi.
Logo Display Time ... Set the logo display time (3/5/7 Seconds).
Cloning
Clone TV to USB Clone the current TV option values to a USB memory device.
Clone USB to TV Clone the saved TV option values in a USB memory device to the TV.
Setting Auto Initialize OFF
When Setting Auto Initialize is set to On, and the power is turned off and on or the
Master Power is turned off and on, the data is restored to the cloned values. If there is
no cloned value, even when the Setting Auto Initialize is set to On, it will be ignored and
the operation will be the same as that whenSetting Auto Initialize is set to Off
REACH
Solution
REACH Server Update
Time 1hour Standby REACH Server will be operated, according to time setting
REACH Update
Immediate OFF Make TV operate REACH Server after 1 minute in Stand-by mode.
REACH Server Channel 87
Set the default channel for REACH Server
•None : After Auto Scan, Operate REACH Server
•Channel value : Operate REACH Server at the channel selected
REACH Server Version 0000 Display REACH Server version of TV
REACH Server Group ID All Provided REACH Server ID for operating SIRCH on a specific set.
REACH ... Set whether to use REACH function.
Background TV Sound OFF Background TV Sound On and Off
TICKER OFF Ticker On and Off
AppLite … •On : The Applite content is displayed.
•Off : The Applite content is not displayed.
Room Number Setting … •Setting Room Number.
Network
Network Setup Set an IP address to establish an Internet connection.
SmartHub Model
Setting Set SmartHub Model.
SmartHub Setting Set up SmartHub.
28
English
Hotel TV Function Description
Category Item initial value
Widget
Solution
Widget Mode ON Widget Mode ON/OFF.
Solution Type Vendor
Server Select type of solution (Vender Server/ SINC Server).
Server URL Setting Set server URL.
License Server IP
Setting Set server IP.
IPTV Mode ON IPTV mode On/Off.
Virtual Standby OFF
Virtual Standby mode On/Off.
When Virtual Standby is On, TV power consumption will be 9.5W to 17.4W (Depending
on the size of the TV screen).
Instant On OFF Setup booting mode.
Room Num Setting Set Room Number.
SERVICE
Self Diagnosis
for TV
Enter Self Diagnosis Menu.
•Picture Test: Use to check for picture problems. If the problem appears in the test
picture, select Yes and follow the directions on the screen.
•Sound Test: Use the built-in melody sound to check for sound problems. If the
problem occurs during the test, select Yes and follow the directions on the screen.
Self Diagnosis for HTV
HD Function Check Menu On Executing Item Below OSD is displayed ProIdiom DTV
Channel Key Loss : Ok/Failure (Hotel US) STB SI Vendor
Setting : SI Name Ok/Failure
Bathroom AMP : Ok/Failure (Hotel EU)
RTC : Ok/Failure (Hotel EU)
PC Audio Test : Ok/Failure
PC Self Test : Ok/Failure
SW Upgrade SW USB Update function
Service Pattern OFF Same function with SVC Service Pattern
Sound Bar Out OFF
ON: TV speaker sound will be mute. Sound will come out through HDMI.
You must connect the Sound Bar to hear the sound.
OFF: Sound will come out through TV speakers normally.
TV Reset Returns all settings on the TV to their factory defaults.
29
English
¦Welcome Message
The welcome message is used to display custom messages on the TV every time TV is turned on by a Guest in Hotel room.
– Welcome message settings are found in the Hotel Option Menu.
– Welcome message should be ON in order to display the message on power-on.
Hospitality Mode Standalone
Widget Solution
SI Vendor
OFF
System
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
Bathroom Speaker
Eco Solution
Logo/Message
Cloning
REACH Solution
Network
r
Welcome Message
ON
Edit Welcome Message
Hospitality Logo
OFF
Hospitality Logo DL
...
Logo Display Time
...
– A welcome message can be up to 25 characters and it can be edited by changing the text in the Hotel Service
menu.
– The following is the list of characters supported by Welcome message:
✎Capital letters, from A-Z
– Welcome message can be edited by using the navigation, colour & enter key on the Remote in the “Edit Welcome
Message” OSD.
Move Enter Return
_
Move to left
Move to Right
Leave Black
Done
A B C D E F G
H I J K L M N
O P Q R S T U
V W X Y Z
WELCOME
Edit Welcome Message
A
B
C
D
– The Welcome message and hotel logo cannot both be active at the same time.
30
English
¦Hotel Logo
The Hospitality Logo function displays the Hotel's picture image when the TV is initially powered on.
– Hospitality Logo settings are the Hospitality mode menus.
– The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on.
– If there is a logo image stored in memory and the Hospitality Logo option is on, the Hospitality logo is displayed
when the TV is turned on.
– The Hospitality logo is not displayed when the Hospitality found Logo option is off, even if the logo image has been
loaded into the TV.
Hospitality Mode Standalone
Widget Solution
SI Vendor
OFF
System
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
Bathroom Speaker
Eco Solution
Logo/Message
Cloning
REACH Solution
Network
r
Welcome Message OFF
Edit Welcome Message
Hospitality Logo BMP
Hospitality Logo DL
Logo Display Time 5 Second
yHospitality Logo
– This option lets you choose whether the Hospitality Logo image is displayed or not.
– Initial value is OFF.
– Can be set to OFF or ON.
– When set to ON, the Logo Download and Logo Time Display menu items become accessible.
yHospitality Logo DL
– This option lets you download the logo image to the TV’s memory from a USB device.
– A wait message appears while the image is being copied to the TV.
– A "completed" message appears when the copy operation finishes successfully.
– The word "failed" appears if the copy operation was unsuccessful.
– No USB appears if no USB device is connected.
– No File appears if there is no file to copy on the USB device or or the file is in the wrong format must be a BMP file.
If No File appears and there is a logo file on the USB device, check the file format.
yLogo File Format
– The TV supports only BMP and AVI format.
– The file name must be samsung.bmp or samsung.avi.
– The maximum resolution of the BMP format is 960 x 540.
– The maximum file size for AVI format is 30MB.
– The TV does not change the size or scale of the image.
31
English
¦USB Cloning
USB Cloning is used to download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup)
from one TV set and upload them to other TV sets.
All the user-defined settings from the TV (Master Set) can be copied to the USB device.
• Cloning from TV to USB: This copies stored data from the TV set to the USB
device.
1. Insert a USB drive into the USB port on the rear of the TV.
2. Enter the Interactive menu by pressing buttons in order.
• MUTE → 1 → 1 → 9 → ENTER
3. Press the ▲ or ▼ button to select “Clone TV to USB”, then press the ENTER
button.
4. When the message “Clone TV to USB” is displayed, press the ENTER button.
5. You can verify USB cloning behavior.
• In Progress: during copying data to USB.
• Completed: copy was finished successfully.
• Failed: copy was not finished successfully.
• No USB: USB is not connected.
• Cloning from USB to TV: This to downloads the stored data in the USB device to TV set.
1. Insert a USB drive into the USB port on the rear of the TV.
2. Enter the Interactive menu by pressing buttons in order: MUTE → 1 → 1 → 9 →
ENTER
3. Press the ▲ or ▼ button to select “Clone USB to TV”, then press the ENTER button.
4. When the message “Clone USB to TV” is displayed, then press the ENTER button.
5. You can Make sure USB cloning behavior.
• In Progress: copying data to TV.
• Completed: copy finished successfully.
• Failed: copy did not finish successfully.
• No USB: USB is not connected.
• No File: there is no file to copy on the USB.
✎Activate copying from USB to TV by pressing ENTER key for 5 seconds.
✎The Hotel TV product family does not support the CLONE function between models that supports the satellite /
T2 operation and models that do not.
For fast, instant cloning during installation,
insert a USB drive with master settings from the first TV and press the Enter key for 5 seconds.
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
OFF
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
OFF
32
English
¦Setting Auto Initialize
When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings: Picture,
Sound, Input, Channel, Setup, and Hotel Setup). This lets you set nearly all of the menu values on your hospitality TVs to
the same, standard settings. If you allow guests access to the guest side menus, for example the Picture menu, they can
change the settings in those menus so they are no longer standard. If you set the Setting Auto Initialize function to on, the
TV automatically restores (initializes) any guest-side menu values to the cloned, standard values when the TV is turned off
and then turned on again. Note that Setting Auto Initialize works on cloned guest side menu values only. Settings which
have not been cloned are ignored.
The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize function to
on.
Menu Menu Item
Picture
Picture Mode
Backlight
Contrast
Brightness
Sharpness
Colour
Tint (G/R)
Apply Picture Mode
Picture Size
Picture Size
Zoom/Position
4:3 Screen Size
Auto Adjustment
PC Screen Adjustment
Coarse
Fine
Position
Image Reset
PIP
Advanced Settings
Dynamic Contrast
Black Tone
Flesh Tone
RGB Only Mode
Colour Space
White Balance
Gamma
Motion Lighting
Picture Options
Colour Tone
Digital Clean View
MPEG Noise Filter
HDMI Black Level
Film Mode
LED Clear Motion
Picture Off
Reset Picture
Sound
Sound Mode
Sound Effect
DTS TruSurround HD
DTS TruDialog
Equaliser
Speaker Settings
Additional Settings
DTV Audio Level
Audio Format
Audio Delay
Dolby Digital Comp
Auto Volume
Reset Sound
Menu Menu Item
System
Accessibility
Audio Description
Subtitle
Menu Transparency
High Contrast
Enlarge
Football Mode
Menu Language
Smart Control Settings
Motion Sensitivity
Touch Sensitivity
Onscreen Remote Size
Voice Control
Language
Use TV Voice
Voice Gender
Device Manager
Keyboard Settings
Mouse Settings
Time
Clock
Sleep Timer
Alarm
Eco Solution
Energy Saving
Eco Sensor
No Signal Power Off
Auto Power Off
Smart Security
Auto Protection Time
Change PIN
General
Game Mode
Sound Feedback
Boot Logo
Samsung Instant On
Anynet+(HDMI-CEC)
DivX® Video On Demand
33
English
¦Plug & Play
Hotel Plug & Play automatically performs Hotel mode selection, Country Setup, Clock Setup and Picture mode Setup.
– Hotel Plug & Play is available only one time when power is first turned ON.
– This is available after first setting up the TV and transferring Clone TV data to a USB drive.
– To use next TV, you only need to exit Hotel Plug & Play, connect the USB, then Clone the USB to TV.
– Depending on model and region, some menus may not exist.
Local Set
Current Localset : EU
Change Local Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Change Skip
Local Set
EU
Warning! TV might not function if Local Set is not correctly configured.
When Local Set is changed, TV will turn off automatically to apply it.
Countries List
Bulgaria, Croatia, Czech, Estonia, Greece, Hungary, Latvia, Lithuania,
Romania, Serbia, Slovakia, Slovenia, EU-Others
Next
Essential Details
Next
Previous
Please Select your country.
This is basic setup to use your Smart TV.
Country Bulgaria
Picture Mode Standard
Easy Set Up
Interactive
(Hotel Menu)
Standalone Setup
(Continue Setup)
Standalone Only
(End Setup)
c
Next
If you select this, Easy
setup will be started.
There are Essential
Details, Channel Scan,
Clock and Terms in Easy
setup.
Auto Tuning
Next
Previous
Select Both to scan for both
Terrestrial or Cable channels
and
Satellite channels.
How do you get your broadcast signal?
c
Both
Satellite
Terrestrial/Cable
Auto Tuning
Next
Previous
Select the connected aerial that
you want to use to get channels.
To receive channels, configure the options belows then
select Scan.
Aerial Terrestrial
Channel Type Digital & Analogue
Scan
Auto Tuning
Ne
x
t
P
r
e
v
ious
Auto tuning is finding channels for you...
Stop
Channel 7
Digital 0
- TV 0
- Radio 0
- Data/Other 0
Analogue 0
2%
Auto Tuning
Next
Previous
Auto Tuning completed.
Change settings Scan Again
Digital 0
- TV 0
- Radio 0
- Data/Other 0
Analogue 0
Select your Language
Next
Press the
udlr
buttons
to move the highlight.
Press the enter button to
select.
Select your language to start the on screen setup.
The Language Setting will be applied to Main Menu and not Plug and Play.
c
English
Fraçais
Deutsch
Italiano
Polski
Clock
Next
Previous
Set current date and time
You can adjust your time to set DST, Time Zone and clock
mode
Clock Mode Auto
Date -- / -- / ----
Time -- : --
Time Zone Auto
DST Off -- : --
TV Setup Complete!
Previous
Your TV is now ready to use.
OK
E
E
E
E
E E
If you select Skip
If you select
Standalone Setup
Select your language
E
E
E
E
E
If you change the country
of the Current Location
If you select
Change The TV is automatically
turned off and on
34
English
yPlug & Play OSD
– Initial Highlight: Interactive
– If Standalone Only button is selected, Standalone hotel mode is set by default and “Standalone mode is set” OSD
is displayed for 3 seconds.
– TV enters into RF mode automatically after displaying “Standalone mode is set” OSD for 3 seconds.
– When Interactive mode is selected, the Interactive Setup Menu appears. Press the power off button to exit from the
Interactive menu.
– When Standalone Plug & Play mode is selected, the “Select Menu Language” OSD is displayed.
ySelect Menu Language OSD
– When Standalone Plug & Play is selected from “Easy Set Up” OSD, “Select Menu Language” OSD is displayed.
– Initial Highlight : English
– Display time: OSD timeout and operation are the same as Samsung's consumer TV models.
– If the ENTER button is pressed, “Select Area” OSD is displayed.
ySelect Country
– Initial Highlight: United Kingdom.
– The Country OSD is displayed and the area can be selected.
yClock setting OSD
– Display time: 30 seconds.
– The Clock Set item OSD is displayed
– If ENTER button is pressed after setting the clock or in Auto, Picture Mode OSD is displayed.
yAuto Search Mode OSD
– If skip option is selected, this goes to Clock setting OSD.
– If the ENTER button is pressed, auto searching of channels is performed.
– The OSD Display time, from the time that Auto Store is started to the time that Auto Sort is completed, is 30
seconds.
yPicture Mode OSD
– Initial Highlight: Standard.
– The Picture Mode OSD is displayed and the Dynamic or a Standard Picture mode can be selected.
– After selecting the picture mode and the TV enters Standalone Setup Menu OSD, press power off to exit.
35
English
¦Multi Code Remocon
Multi Code Remocon is a special transmitter which is designed to control each TV with one remote.
This is useful where there is more than one TV in a location, such as in a hospital the set ID number is displayed in the
source osd. It is possible to support up to 9 different remote key transmissions for multiple codes.
Each TV has an initial code of "0".
– The ID code can be set and reset in Analogue TV mode or PC mode. (not available in TTX channel or DTV channel.
– ID code can be from 0 to 9.
– Press the MUTE button and the RETURN button simultaneously for more than 7 seconds and then select the
number button to set the code.
– Set ID OSD appears.
– The following words appear: “Remote control code is set to 0. If you want to change the Remote control code,
enter the chosen digit.” X is the digit number.
✎This OSD displays until Exit is pressed.
Remote control code is set to 0. If you want
to change the Remote control code, enter the
chosen digit.
– For example, TV and Remote will be set to ID code #1 if the user presses #1.
– The following words appear: “Remote control code is changed to 1” At this point, the TV can be controlled only by
the remote with the same ID code as the TV.
– TV, the following words will be displayed. “ TV ID x”(x is the TV’s ID)
– To reset the ID code, press the MUTE button and the EXIT button simultaneously for more than 7 seconds. When
you stop pressing the buttons, the ID code for both the TV and Remote are reset to “0”. “Remote control code is
set to 0.” appears.
36
English
¦CH Bank Editor (Smoovie TV Only)
Channel Bank Editor edits channels, with 3 different Bank Options.
Depending on the Bank card, there are specific channels Hotel customers can enjoy.
Setting the CH Bank Editor under Stand-alone Mode
1. Enter the Hotel Standalone menu by “MUTE + 1 + 1 + 9 + ENTER”
2. Please select SI vendor : “Smoovie”
3. find the new menu option, “Channel Bank Editor”
4. Enter the “Channel Bank Editor”
Hospitality Mode
Standalone
REACH Sever
SI Vendor
OFF Network
d
SI Vendor
Smoovie
d
Channel
d
Channel Bank Editor
<Depending on model and region, some menu items may not exist>
37
English
5. Edit the channel bank like below example.
a. BANK1 (Free channel): Select the channel that will be used when remote doesn’t have any card.
b. BANK2 (Family Card - Green): Select the channel that will be used when remote has a GREEN CARD.
c. BANK3 (Adult Card - Red): Select the channel that will be used when remote has a RED CARD.
n Move E Select/Deselect R Return
Channel Bank Edit
Registered Bank1 (4)Bank2 (6)Bank3 (36)
1 1futech
c
2 BBC1
c c c
3 24ore.tv
c c c
4 C3
c c
5 BBC World
c c
6 C5
c c
7 Coming Soom
c c
8 S2
c
9 S2
c
References of using SMOOVIE Remote Controller
1. If you select SMOOVIE as the SI vendor, you should use the SMOOVIE Remote Controller.
2. With the Numeric keys of the remote controller, users can select only the Bank1 channel.
To change the channel using the Green or Red Card, please use channel up/down keys.
3. For the Channel guide or the Channel list, users can see only Bank1 channel list.
38
English
¦Channel Editor
Channel Editor edits channel number a and name.
– Use Channel Editor to sort the channels as user-desired channel numbers.
Hospitality Mode Standalone
Widget Solution
SI Vendor
OFF
System
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
Bathroom Speaker
Eco Solution
Logo/Message
Cloning
REACH Solution
Network
r
Channel Editor
<Depending on model and region, some menu items may not exist>
Simple Steps for channel Editor under Stand-alone Mode
Step Broad Outline
1 Operate ‘Channel Auto Store’ in Hotel Option Menu
2 Enter ‘Channel Editor’ in Hotel Option Menu
3 Compile a table related to the final channel lists you want to have
4 Rearrange channels with the TOOLS Button based on the table you compiled
5 Press the EXIT or RETURN Button to exit.
<please refer to the following details>
39
English
Smoovie On sequence
Step
Smovie TV used (Air/ Cable )
Mixed Channel Map On (Air and Cable both used) Only Air or Cable used Only Air or Cable used
If the tv starts with Hotel P&P If P&P already done If the tv starts with Hotel P&P If P&P already done
1Do the P&P, except channel
store Enter Hotel menu Do the P&P all (Air or Cable
auto tune) Enter Hotel menu
2After P&P TV shows hotel
menu Setup Mixed Channel Map On After P&P TV will show hotel
menu
Select channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
3 Setup Mixed Channel Map On TV power off & on
Select channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
Select smoovie TV in Hotel
menu
4 Make TV power off & on Enter Hotel menu Select smoovie TV in Hotel
menu Select Channel Setup
5 Enter Hotel menu Select smoovie TV in Hotel
menu
Select Channel Setup
(can be skipped)
Select "Air" or "Cable" to auto
tune
6Select smoovie TV in Hotel
menu Select Channel Setup Select "Air" or "Cable" to auto
tune (can be skipped) setup CH Bank Editor
7 Select Channel Setup Select "Air + Cable" to auto
tune Setup CH Bank Editor After power off & on, user can
use TV
8Select "Air + Cable" to auto
tune Setup CH Bank Editor After power off & on, user can
use TV
9 Setup CH Bank Editor After power off & on, user can
use TV
10 After power off & on, user can
use TV
Step
Smovie TV used( Satellite )
Mixed Channel Map On (Satellite and Air or Cable both
usedused) Only Satellite used
If the tv starts with Hotel
P&P If P&P already done If the tv starts with Hotel
P&P If P&P already done
1Do the P&P except channel
store Enter Hotel menu Do P&P all: Air or Cable
auto tune) Enter Hotel menu
2After P&P TV will show hotel
menu
Setup Mixed Channel Map
On
after P&P TV shows hotel
menu
Select channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
3Setup Mixed Channel Map
On Make TV power off & on
Select channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
Select smoovie TV in Hotel
menu
4 Make TV power off & on Enter Hotel menu Select smoovie TV in Hotel
menu Select Channel Setup
5 Enter Hotel menu Select smoovie TV in Hotel
menu
Select Channel Setup (can
be skipped) Select Satellite to auto tune
6Select smoovie TV in Hotel
menu Select Channel Setup Select Satellite to auto tune
(can be skipped) Setup CH Bank Editor
7 Select Channel Setup Select Satellite to auto tune Setup CH Bank Editor After power off & on, user
can use TV
8 Select Satellite to auto tune Setup CH Bank Editor After power off & on, user
can use TV
9 Setup CH Bank Editor After power off & on, user
can use TV
10 After power off & on, user
can use TV
40
English
Channel List
You can view channel information, All, TV, Radio, Data/Other, Analogue or Favourites 1-5.
✎When you press the CH LIST button on the remote control, Channel List screen displays immediately.
Channel List Guide AllShare Play Schedule Manager Source
Contents Home
R Return
* The displayed image may differ depending on the model.
• All: Shows all currently available channels.
• TV: Shows all currently available TV channels.
• Radio: Shows all currently available radio channels.
• Data/Other: Shows all currently available MHP or other channels.
• Analogue: Shows all currently available analogue channels.
• Favourites 1-5: Shows all favourite channels.
✎If you want to view added favourite channels press the CH LIST button and use the L (Ch. Mode) button to move
between Favourites 1-5.
✎Using the control buttons with the Channel List.
• T (Tools): Displays the option menu.
• L (Ch. Mode / Channel): Move to the All, TV, Radio, Data/Other, Analogue or Favourites 1-5.
• When you select the Programme View in T (Tools) menu, you can move to other channels using L (Channel)
button.
• E (Watch / Information): Watches the channel you selected. / Displays details of the selected programme.
• k (Page): Move to the next or previous page.
41
English
How to use Schedule Viewing in Channel List
(digital channels only)
When you set the Schedule Viewing in Channel List, you can only set the programme in Programme View.
1. Press the CH LIST button, then select a desired digital channel.
2. Press the TOOLS button, and then select Programme View. The programme list for that channel appears.
3. Press the ▲ / ▼ buttons to select the desired programme, then press the ENTERE (Information) or INFO button.
4. Select Schedule Viewing, then press the ENTERE button when done.
✎If you want to cancel Schedule Viewing, follow steps 1 through 3. Select Cancel schedule.
Using Option Menu t
Set each channel using the Channel List menu options (Programme View, Edit Favourites, Lock/Unlock, Edit Channel
Name, Edit Channel Number, Delete, Information, Sort, Edit Mode).
Option menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
• Programme View: Displays the programme when a digital channel is selected.
• Edit Favourites: Set channels you watch frequently as favourites. Add or delete the selected channel in Favourites 1-5.
1. Select the Edit Favourites, then press the ENTERE button.
2. Press the ENTERE button to select Favourites 1-5, then press the OK button.
✎One favourite channel can be added to several favourites among Favourites 1-5.
• Lock/Unlock: Lock a channel so that the channel cannot be selected and viewed.
✎This function is available only when the Channel Lock is set to On.
✎The PIN input screen appears. Enter your 4-digit PIN. Change the PIN using the Change PIN option.
• Edit Channel Name (analogue channels only): Assign your own channel name.
• Edit Channel Number (digital channels only): Edit the number by pressing the number buttons.
✎Some areas may not be able to support Edit Channel Name and Edit Channel Number.
• Delete: You can delete a channel to display the channels you want.
• Information: Displays details of the selected programme.
• Sort: Changes the list ordered by channel number or channel name.
• Edit Mode: Select desired channels and edit them.
42
English
Using Option Menu t
Set each channel using the menu options (Edit Favourites, Lock/Unlock, Delete, Deselect, Select All).
1. Press the TOOLS button in Channel List screen, then select the Edit Mode. A check box appears to the left of the
channel.
2. Press the ▲/▼ buttons to select the desired channel, then press the ENTERE button. The (c) mark indicates the
channel you’ve selected.
✎You can select more than one channel.
✎Press the ENTERE again to deselect the channel.
3. Press the TOOLS button, then select a function and change its settings.
• Edit Favourites: Set the selected channels you watch frequently as favourites.
✎The Edit Favourites screen has five groups (Favourites 1, Favourites 2, etc.). You can add a favourite channel to
any one of the groups. Press the ▲/▼ buttons to select a group.
• Lock/Unlock: Lock a channel so that the channel cannot be selected and viewed.
✎This function is available only when the Channel Lock is set to On.
✎The PIN input screen appears. Enter your 4-digit PIN. Change the PIN using the Change PIN option.
• Delete: You can delete a channel to display the channels you want.
• Deselect: Deselect the selected channels.
• Select All: Select all the channels in the channel list.
43
English
¦My Channel
Determines the country and genre for the channels provided by the hotel, and if the user selects a country and genre, shows
the corresponding channels.
• You must select the country first, or you can not set a genre.
• If you select the genre without adding any channels, the channel list displays all of the available channels.
• My Channel works in Standalone mode only.
• SI Vendor in Standalone mode: This does not work if Smoovie is selected.
• This is in the Hotel Options in Hotel Menu > Service Mode and can be turned on or off.
• The option only works when it is set to On.
Channel Composition [Genre Mode]
Standard Category Ch. Mode Antenna Mode Activation Description
Air/Cable Satellite
Hotel Genre
All (Default) O O
Provide genre channel mode by each country
that master has managed in factory mode.
News O O
Radio O O
Entertainment O O
Sport O O
Hotel O O
My Channel
Current status : Austria/Sports
Country Genre
All Country All
Austria News
Belgium (Dutch) Radio
Belgium (French) Entertainment
Czech Sports
France Hotel
Germany
▼
(Blue)Keep Previous (U/D/L/R)Move (En)Enter
1
8
3
6
7
2
4 5
* For the number of items to be displayed in the list, refer to the design document.
Key Guide
Button Action Nav. Help
BLUE Returns to the screen. (Genre setup: Last Country & Genre) Keep Previous
ENTER Selects an item. Enter
Ch. Up/Down Move the highlight by page. (No Guide)
UP/DOWN Navigates the each country, genre list. (in a circular manner.) Move
RIGHT Selects the highlighted item, and then move the highlight to Genre section.
RETURN Returns to the screen. (Genre setup: Last Country & Genre) (No Guide)
EXIT Returns to the screen. (Genre setup: Last Country & Genre) (No Guide)
44
English
✎NOTE
• This section describes the layout of the Front UI that appears when the TV is turned on. (Factory Mode > Genre
Mode: Enable)
• The genre is a sub-list for each country.
• The broadcast screen that was being displayed the last memorial channel.
– If user want to keep the previous country & genre channel map, press the ‘BLUE’, RETURN, and EXIT remote-
control key to close the Front UI.
✎ETC.
• Default Highlight : Last Memory items (Country, Genre)
• Timeout (60 sec)
Elements
No Name Description
1 Background Screen Displays the last memorized channel that appears when TV is turned on.
2 Function Title This is name of the function.
3 Current Status Display current settings the Country/Genre.
4 Country Items The item for the country list is displayed.
Displays the last selected country.
5 Genre Items
The item for the genre list is displayed.
Displays available genre items by each country that master managed in factory mode. (always
provide ‘All’ item)
Displays the last selected genre.
6 Highlight If the item title is too long to be displayed within the area, Auto Text Sliding works.
7 Indicator This is displayed when there is a previous or next page.
8 Nav. Help The key guide is right-aligned.
45
English
Highlight Interaction [Country Items]
• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
✎NOTE
• Users can navigate the items in each country & genre list by pressing the up or down remote control keys.
• Circular navigation is supported.
DOWN x 4
DOWN x 4
DOWN x N
DOWN
DOWN
UP x 4
UP x 4
UP x N
UP
UP
END
My Channel
Current status : All Country/Sports
Country Genre
▲
All Country All
Austria News
Belgium (Dutch) Radio
Belgium (French) Entertainment
Czech Sports
France Hotel
Germany
▼
1
My Channel
Current status : All Country/Sports
Country Genre
▲
All Country All
Austria News
Belgium (Dutch) Radio
Belgium (French) Entertainment
Czech Sports
France Hotel
Germany
▼
My Channel
Current status : All Country/Sports
Country Genre
▲
All Country All
Austria News
Belgium (Dutch) Radio
Belgium (French) Entertainment
Czech Sports
France Hotel
Germany
▼
My Channel
Current status : All Country/Sports
Country Genre
▲
Austria All
Belgium (Dutch) News
Belgium (French) Radio
Czech Entertainment
France Sports
Germany Hotel
Hungary
▼
My Channel
Current status : All Country/Sports
Country Genre
▲
Slovakia All
Spain News
Switzerland Radio
United Kingdom Entertainment
Eastern Europe Sports
Other Hotel
▼
My Channel
Current status : All Country/Sports
Country Genre
▲
Slovakia All
Spain News
Switzerland Radio
United Kingdom Entertainment
Eastern Europe Sports
Other Hotel
▼
46
English
Highlight Interaction [Default Genre]
• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
ENTER / RIGHT
LEFT
My Channel
Current status : All Country/Sports
Country Genre
▲
All Country All
Austria News
Belgium (Dutch) Radio
Belgium (French) Entertainment
Czech Sports
France Hotel
Germany
▼
Navigation Help Area
My Channel
Current status : All Country/Sports
Country Genre
▲
All Country All
Austria News
Belgium (Dutch) Radio
Belgium (French) Entertainment
Czech Sports
France Hotel
Germany
▼
Navigation Help Area
• The current selection of the country is high-
lighted.
• Default High-light: The current selection of the
genre.
ENTER / RIGHT
LEFT
My Channel
Current status : All Country/Sports
Country Genre
▲
All Country All
Austria News
Belgium (Dutch) Radio
Belgium (French) Entertainment
Czech Sports
France Hotel
Germany
▼
Navigation Help Area
My Channel
Current status : All Country/Sports
Country Genre
▲
All Country All
Austria News
Belgium (Dutch) Radio
Belgium (French) Entertainment
Czech Sports
France Hotel
Germany
▼
Navigation Help Area
• Seems source error, it should be read as "The
other item of the county is high-lighted.".
Please verify. (ex. France)
• Default Highlight : All
47
English
Mode Change Interaction 1 (1/2)
• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
ENTER / RIGHT
LEFT
My Channel
Current status : All Country/Sports
Country Genre
▲
All Country All
Austria News
Belgium (Dutch) Radio
Belgium (French) Entertainment
Czech Sports
France Hotel
Germany
▼
Navigation Help Area
My Channel
Current status : All Country/Sports
Country Genre
▲
All Country All
Austria News
Belgium (Dutch) Radio
Belgium (French) Entertainment
Czech Sports
France Hotel
Germany
▼
Navigation Help Area
1
• Current Genre Mode : All Country / Sports
ENTER / RIGHT
UP
DOWN
My Channel
Current status : All Country/Sports
Country Genre
▲
All Country All
Austria News
Belgium (Dutch) Radio
Belgium (French) Entertainment
Czech Sports
France Hotel
Germany
▼
Navigation Help Area
My Channel
Current status : All Country/Sports
Country Genre
▲
All Country All
Austria News
Belgium (Dutch) Radio
Belgium (French) Entertainment
Czech Sports
France Hotel
Germany
▼
Navigation Help Area
ENTER
ENTER / RIGHT
6
• If the country is selected, highlight moves to genre
menu automatically.
48
English
Mode Change Interaction 1 (2/2)
• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
1
My Channel
Current status : All Country/Sports
Country Genre
▲
All Country All
Austria News
Belgium (Dutch) Radio
Belgium (French) Entertainment
Czech Sports
France Hotel
Germany
▼
Navigation Help Area
ENTER
1
Info
Genre Mode change to Austria/News.
OK
65
• The genre mode change complete message is
displayed.
• Timeout(5 sec.)
• Pressing the left key from the genre to country
menu highlights an existing selected country
item.
ENTER / RETURN / Timeout
Current Status : Austria / News
49
English
Mode Change Interaction 1 (1/2)
• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
1
DOWN
UP x 5
My Channel
Current status : All Country/Sports
Country Genre
▲
All Country All
Austria News
Belgium (Dutch) Radio
Belgium (French) Entertainment
Czech Sports
France Hotel
Germany
▼
Navigation Help Area
My Channel
Current status : All Country/Sports
Country Genre
▲
All Country All
Austria News
Belgium (Dutch) Radio
Belgium (French) Entertainment
Czech Sports
France Hotel
Germany
▼
Navigation Help Area
• Current Genre Mode : All Country / Sports
ENTER / RIGHT
BLUE
/
RETURN
/
EXIT
My Channel
Current status : All Country/Sports
Country Genre
▲
All Country All
Austria News
Belgium (Dutch) Radio
Belgium (French) Entertainment
Czech Sports
France Hotel
Germany
▼
Navigation Help Area
101
Info
Genre Mode change to Austria/News.
OK
ENTER
/
RETURN
/
Timeout
• If the country is selected, highlight moves to genre
menu automatically.
5
Current Status : Austria / News
50
English
Power On Scenario [Last Memory]
• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
Current Status : Austria / News Power Off
POWER
1
• Current Genre Mode : All Country / Sports
POWER
My Channel
Current status : All Country/Sports
Country Genre
▲
All Country All
Austria News
Belgium (Dutch) Radio
Belgium (French) Entertainment
Czech Sports
France Hotel
Germany
▼
Navigation Help Area
• Current Genre Mode : Austria / News
51
English
Genre Editor: This configures the genres of each of the hotel TV channels.
• This can be used through the Hotel Menu (Factory).
• Supported genres include News, Radio, Entertainment, Sports and Hotel.
• More than one genre can be selected for each channel at the same time.
Country Editor (Channel Editor): This is the editor that configures the country for each of the hotel TV channels.
• Supported countries (20 countries): Austria, Belgium, China, Denmark, Finland, France, Germany, Greece, Italy, Japan,
Netherlands, Norway, Portugal, Russia, Korea, Spain, Sweden, Turkey, USA
• If more than one channel is set to a country, the country is registered as a category and users can view the channels by
country.
• More than one country can be set to a channel. If the user selects a category, only the channels corresponding to the
country are displayed in the channel list.
• If any channel for which the country is set is selected from the channel list, the Edit Countries item is added to the Tools.
Otherwise, the Add to Countries item is added to the Tools.
• * If the corresponding function is executed, a country for the selected channel can be set or canceled.
• Front UI
• Provides the screen where the user can select a country or genre when the user turns the power on.
Left Frame Layout
Key Guide
Button Action Nav. Help
ENTER Selects or enters the corresponding Channel Browser area. (No Guide)
RETURN Selects or enters the corresponding Channel Browser area. Return
UP/DOWN Moves the highlight up or down. (No Guide)
RIGHT Moves the highlight to the Channel Browser area. (No Guide)
INFO Shows the Category Info. (No Guide)
TOOLS Shows the utility function menus. Tools
EXIT Cancels and returns to the previous step (Factory Mode). (No Guide)
✎NOTE
• This is a component of the Left Frame (Country Categories).
✎ETC.
• Default Highlight: ‘The currently selected country’
52
English
Elements
No Name Description
1
•When the user enters this screen, the currently selected default item is highlighted.
•The Country Icon + Category Name are provided. (If the highlight is in the Main Frame, only the
icon is displayed.)
•Moving the highlight
– Pressing the up or down button moves the highlight.
– If the items cannot be displayed on one page, up and down indicators are provided.
– Once the highlight is moved to a category, the channel list corresponding to the
corresponding category is loaded to the Main Frame.
Left Frame [Country Categories]
Standard Category Ch. Mode
Antenna Mode Activation
Description
Air/Cable Satellite
Hotel
Original
Tuned Registered O O •Lists all the channels registered by the Auto
Tune operation.
Country All Country O O
•Provides the list of channels and sources
specified in the Registered Channels list.
•All Country is the sum of all channels registered
to each country. (This is only provided to end
users.)
Country 1 O O
Country 2 O O
. O O
Tools [Registered/Countries Categories]
• Channel Manager > Channel Category > Tools > Info
•The items are displayed without ‘Channel’.
•If the Registered/Country item in the Left Frame is
highlighted, you can enable the corresponding window by
pressing the ‘INFO’ remote control key.
•All countries are displayed.
•navigate country items by pressing the up or down key.
Indicators are provided.
53
English
✎NOTE
• This is a definition of the Tools menu in the Left Frame Category.
• Only the Info item for each Register/Country is provided.
Elements
Category Tools menu Descriptions
Registered, Country Information Registered Channels. The number of channels of each country.
• The items are displayed without ‘Channel’.
Error Cases
✎NOTE
• This is the message for when there are no saved channels in the Registered Channels list.
Elements
No Name Description
1 Message
•When entering the browser, if the Registered channels item is empty, a
popup message is displayed which enables users to switch to the Auto
Store (Programme) menu.
•When both the time and the channel are not configured, and a user
enters the Channel Manager, a message that allows the user to switch
to the Auto Tuning (Auto Program) operation is displayed in the same
way as above.
• This is the message when the time is not configured.
– If the time is not configured, the message is displayed in Factory Mode before entering the Channel Manager.
54
English
✎NOTE
• This is the component for when there are no channels registered to the country category.
Elements
No Description Description
The message is displayed when the currently selected country does not contain any
items.
Main Frame [Channel Browser]
55
English
Key Guide
Button Action Nav. Help
CH UP/DOWN Moves the page. Page
ENTER Selects or enters the corresponding Channel Browser area. Select
RETURN Returns to the previous step (Factory Mode). Return
UP/DOWN Moves the highlight up or down. (No Guide)
RIGHT Moves the highlight to the Channel Browser area. (No Guide)
INFO Shows the Category Info. (No Guide)
TOOLS Shows the utility function menus. Tools
EXIT Cancels and returns to the previous step (Factory Mode). (No Guide)
✎NOTE
• This is a component of the Main Frame (Channel Browser).
• The initial highlight is on the channel before entering Factory Mode or the external input.
Elements
No
Name Description
1
Main Frame
• Shows the channel or the source list of the currently selected category.
2 Scroll Bar
• Shows the position of the current page amongst the total amount of pages.
3 Navigation Help Area
• This is displayed whenever a user enters the Channel Manager. (If a user exits and then
reenters the Channel Manager, it is displayed again.)
• This disappears when the timeout (5 sec.) is reached or a user presses a key.
4 Navigation Help Area
• The currently configured country information and the RED buttons are left-aligned.
They are displayed and navigated by group graphically. The key guide is right-aligned.
56
English
Channel Common Elements [+ Icon-method]
Channel list representation rules
Standard Item
Construction
ATSC
Digital channels
•Check Box + Status Icon + Digital Channel Number + Channel Name
•Channel number representation format: ###-### (The channel number is
represented by ‘-’.)
Analog channels
•Check Box + Analog Icon + Analog Channel Number + Channel Name
•Channel number representation format: ### (‘-’ is not used to represent analog
channel numbers.)
DVB (CHEM)
Digital channels
•Check Box + Status Icon + Digital Channel Number + Channel Name
•Channel number representation format: ### (For the maximum length of the
channel number, follow the regional specifications.)
Analogue channels
•Check Box + Analog Icon + Analog Channel Number + Channel Name
•Channel number representation format: ### (For the maximum length of the
channel number, follow the regional specifications.)
Channel list icon representation rules
Item Example Priority
Dynamic SI
Icon
Channels deleted
by Dynamic SI NNNNNNNN CH. NAME
•Channels that have been deleted by the
Dynamic SI but not by the user. 1
Channels added by
Dynamic SI NNNNNNNN CH. NAME
•Channels that have been added by the
Dynamic SI but not by the user. 2
Analogue Channel Icon
NNNNNNNN CH. NAME (The
edited channel name.)
•The Analogue channel icon is displayed. 3
Source Channel Icon NNNNNNNN CH. NAME •A channel that is an input source. 4
Antenna Icon Air NNNNNNNN CH. NAME
•Represents the live channels from the
antennas. The Air, Cable or Satellite antenna
icons are displayed with the lowest priority.
5
Cable NNNNNNNN CH. NAME
Satellite NNNNNNNN CH. NAME
Scrambled Channel Icon NNNNNNNN CH. NAME
•The scrambled channel icon. This appears for the
Satellite antenna. -
Video Mute NNNNNNNN CH. NAME
•A screen-muted channel. Audio and channel
information is provided. -
57
English
Add to Countries / Edit Countries (1/2)
•Channel Manager > Browser > Tools > Add to Countries
Key Guide
Button Action Nav. Help
ENTER Selects the highlighted item. Enter
RETURN Cancels and returns to the previous screen (Tools). Return
UP/DOWN Moves the highlight over country items. Move
LEFT/RIGHT Moves the highlight. Move
INFO N/R N/R
TOOLS Closes the current window and displays the ‘Tools’ menu. (No Guide)
EXIT Cancels and returns to the previous step (Factory Mode). (No Guide)
✎NOTE
• This is the definition of Add to Countries.
• The highlighted channel or more than one selected channel is added to the Country category.
✎ETC.
• Timeout (60 sec)
58
English
Elements
No Name Description
1Add to Countries
Window
•If there are no channels that have been registered to the country list in the
selected channels, “Add to Countries” is displayed as the title.
•A check box is displayed depending on whether the country that was
selected when entering the screen is registered or not.
2 Guide
3 Selection Info
•The number of the selected channel or the channel name.
– The channel name is displayed when one channel has been selected:
Selected channel: NNNN-NNN ABC
– The number of selected channels is displayed when more than one
channel has been selected: Selected Channels : N
4 Complete Message •The message is displayed after the completion of the operation. (This
message is always displayed if the OK button is selected.)
5 Selection Mark
•How to identify the meaning of multiple channel selection marks
• : When all of the items have been registered.
• : When only part of the items have been registered.
• : When none of the items have been registered.
Add to Countries / Edit Countries (2/2)
• Channel Manager > Browser > Tools > Add to Countries
59
English
Key Guide
Button Action Nav. Help
ENTER Selects the highlighted item. Enter
RETURN Cancels and returns to the previous screen (Tools). Return
UP/DOWN Moves the highlight over country items. Move
LEFT/RIGHT Moves the highlight. Move
INFO N/R N/R
TOOLS Closes the current window and displays the ‘Tools’ menu. (No Guide)
EXIT Cancels and returns to the previous step (Factory Mode). (No Guide)
✎NOTE
• This is the definition for Edit Countries.
• The highlighted channel item or more than one selected channel item is added or deleted from the Country category.
• Timeout (60 sec)
Elements
No Name Description
1 Add to Countries
•If there is a registered channel among the selected channels, Edit Countries
is displayed as the title.
•A check box is displayed depending on whether the selected country is
registered or not.
2 Guide •
3 Complete Message •The message is displayed after the completion of the operation. (This
message is always displayed if the OK button is selected.)
Edit Channel Number [Swap Type]
• Channel Manager > Browser > Tools > Edit Channel Number
60
English
Key Guide
Button Action Nav. Help
ENTER Applies the changes and closes the window. Enter
RETURN Cancels and returns to the previous screen (Tools). Return
U/D Changes the channel number of the selected channel. Adjust
0~9 Enters a digit. Number
INFO N/R N/R
TOOLS Closes the current window and displays the ‘Tools’ menu. (No Guide)
EXIT Cancels and returns to the previous step (Factory Mode). (No Guide)
✎NOTE
• This is the function that changes the channel number. (Swap Type)
• Channel numbers can be changed in all the channel lists and changes are applied to all the channels.
• If the new channel number has not been allocated to another channel, the channel number is updated to the new
channel number and the list is sorted again in ascending order of channel number.
• If the new channel number has already been allocated to another channel, follow the Hotel specifications.
✎ETC.
• Vertical circulation is supported.
Elements
No Name Description
1Edit Channel
Number Window
•Both the numeric keys and the Up/Down keys are supported.
– Selected Channel: Shows the currently selected channel name.
– Number: Shows the new channel number.
(The currently allocated channel name is also displayed.)
– Name: Shows the currently allocated channel name. (If there are no
channels, it is displayed as “(Empty)”.) : If there is a channel but it does
not have a name, the name is represented as “-----”.
2Warning
Message
•If an already allocated channel is selected
– If the new channel number has already been allocated to another
channel, the confirmation message pops up. (Refer to the figure
below.)
– If the user wants to change the channel number to one that has
already been allocated to another channel, the channel numbers are
swapped and saved.
61
English
Edit the Channel Number [External Input] (3/3)
• Channel Manager > Browser > Tools > Edit Channel Number
Key Guide
Button Action Nav. Help
RED If a user presses the button, the channel number is initialized. Reset
ENTER Applies the changes and closes the window. Enter
RETURN Cancels or returns to the previous screen (Tools). Return
U/D Changes the channel number of the selected channel. Adjust
0~9T Enters a digit. Number
INFO N/R N/R
TOOLS Closes the current window and displays the ‘Tools’ menu. (No Guide)
EXIT Cancels and returns to the previous step (Factory Mode). (No Guide)
✎NOTE
• This function allocates an external input source to a channel number. (The changes are applied to all the channels.)
• If the new channel number has already been allocated to another channel, follow the Hotel specifications.
✎ETC.
• Default Highlight: Channel number area.
• Vertical circulation is supported.
• Timeout (60 sec)
62
English
Elements
No Name Description
1 Channel Number Area
•The channel number area.
– Both the numeric keys and the Up/Down keys are supported.
– If no value is allocated, as many ‘-’ are displayed as the number of digits.
▲▲▲
-- →1→15
▼▼▼
2 Source Name •External input name
– Items that cannot be configured are disabled.
3 Nav. Help Area •If a user presses the red button, the channel number is initialized.
Edit Channel Name
• Channel Manager > Browser > Tools > Edit Channel Name
Key Guide
Button Action Nav. Help
GREEN Saves the changes and returns to the Channel Manager. Done
ENTER Saves the channel name and moves the cursor to the next field. Enter
RETURN Cancels and returns to the previous screen (Tools). Return
U/D/L/R Navigates on the keyboard. Move
0~9 Enters a digit. (No Guide)
INFO N/R N/R
TOOLS Closes the current window and displays the ‘Tools’ menu. (No Guide)
EXIT Cancels and returns to the previous step (Factory Mode). (No Guide)
✎NOTE
• This is the definition of the keypad that is used for the Edit Channel Name function.
✎ETC.
• Timeout (60 sec)
63
English
Elements
No Name Description
1 Channel Name Edit Window
2 Channel Name
•The cursor and the character that are currently being entered are in the same colour as the
highlight.
•When the maximum number of characters is reached, the cursor disappears.
3 Keyboard •For a detailed scenario, refer to the keypad design document.
Tools [Edit Mode]
Edit Mode
Content Highlight (when the number of the checked item is 0 or 1) When there is more than one checked item.
Add to Countries
Edit Countries (when an already-registered item is checked.)
Channel Name Edit
Edit Channel Number
Video Mute
Channel Copy (Astra HD +)
Reorder (Satellite)
Select All
Deselect All (this is only displayed when 1 or more items are
selected)
Delete
Add to Countries
Edit Countries (when an already-registered item is checked.)
Video Mute
Reorder (Satellite)
Select All
Deselect All
Delete
✎NOTE
• The position of the popup menu: The Tools menu for an item in the left column of the Channel List → This is
displayed on the right. The Tools menu for an item in the right column of the Channel List → This is displayed on the
left.
• If a user presses the TOOLS button when the highlighted item is not selected, the item is automatically marked as
selected.
• For detailed specifications of each function, refer to the NEO Channel Manager.
64
English
CH Banner [when a channel number is allocated to an external input]
✎NOTE
• The TV channel banner specifications are applied.
• When there is an unsupported item or there is no corresponding information, the item values are not displayed.
• The channel name is represented as the ‘external input name’.
Elements
No Name Description
1 External Input Name
The Channel List provides access to functions related to GenreTV.
• Country Mode
• Changes the genre mode.
¦Mixed Channel Map
Mixed Channel Map is a function to mix Air, Cable and Satellite channels.
[ Except for Aus, Singapore, NZ models ]
– Mixed channel Map should be ON in order to mix Air, Cable and Satellite channels.
– Use Channel Editor to sort the channels after turning on 'Mixed channel Map' in Hotel Option Menu.
65
English
¦Sound Bar
• Samsung Sound-Bars and Hospitality TV
– Use Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI. If you connect a compatible
Samsung Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to
theTV’s sound through the Sound-Bar.
– Models supporting the ARC function are listed below:
• Sound-Bars: HW-H450/H550/H570/H600/H7500
HW-J450/J470/J550/J6000
• Setting the Sound-Bars to Hotel Mode.
1. Set the following Hotel menu options:
– Hotel option > External Device > Sound Bar Out = On.
– Hotel option > Power On > Power On Volume EN = User Defined.
– Hotel option > Power On > Power On Volume > Set greater than 0.
– Hotel option > Power On > Max Volume > Set greater than 0.
2. Connect an HDMI cable from the HDMI OUT jack on the back of Sound-Bar to the HDMI3 port (supporting ARC) on
the hospitality TV.
3. After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects
the TV, and then automatically switches to Hotel Mode.
Sound Bar Hotel mode functional characteristics:
• Power On/Off is synchronized with the TV
• HDMI_CEC defaults to On
• Functions through the “HDMI OUT” port only
• Disables the “Input mode” key on the VFD to prevent unexpected audio-source changes.
• Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. The Sound-Bar’s Power
On Volume and Max Volume values, however, are ½ of the Power On Volume and Max Volume settings in the TV’s
Hotel option menu.
Example: If the TV’s Power On Volume=20 and Max Volume=90, then the Sound Bar’s Power On Volume=10 and
Max Volume=45.
*This function may differ depending on the model.
66
English
¦Security mode
Design Specifications
• This is to restrict some functions such as TTX and external source (HDMI, USB) input in specific facilities such as a
correctional facility.
• The Security menu is password-protected. Access to the Security menu is denied without the password.
• Security Setting
– The Security Setting can be set to ON or OFF.
– The default is OFF.
– Security Setting: If set to On, external source (HDMI, USB) input and the TTX function will be disabled.
• Password Setting
– This allows users to change the password.
– Users must input the current password, a new password, and confirmation of the new password.
• Password Reset
– This is to reset the password.
– The default password is "00000000".
– Password Reset is visible only in the Factory menu by using the key combination of Info and Factory.
It is not visible using the key combination of MUTE + 1 + 1 + 9 + ENTER.
• Security Setting: If set to On, the SIRCH function is not available.
• Factory Reset will not reset the Security Setting.
67
English
Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall
mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount
bracket. We do not advise you to do it yourself.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install
the TV on your own.
Wall Mount Kit Specifications (VESA)
✎The Wall mount kit is not supplied but sold separately.
Install your wall mount on a solid wall, perpendicular to the floor. When attaching to other building materials, please contact
your nearest dealer. If installing on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎NOTE
• Standard dimensions for wall mount kits are shown in the table below.
• When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
• Do not use screws that do not comply with VESA standard screw specifications.
• Do not use screws longer than the standard dimensions, as they may cause damage to the inside of the TV set.
• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on their specifications.
• Do not fasten the screws too tightly. This may... damage the product or cause the product to fall, leading to personal
injury. Samsung is not liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
the consumer fails to follow the product installation instructions.
• Do not exceed a 15 degrees tilt when mounting this TV.
inches VESA Spec. (A * B) Standard Screw Quantity
28 100 X 100 M4
4
32~40 200 X 200
M8
48~55 400 X 400
Do not install your Wall Mount Kit while your TV is turned on.
It may result in personal injury due to electric shock.
68
English
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not
hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety
precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as
follows.
To avoid the TV from falling
1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed
onto the wall.
✎You may need additional material, such as an anchor, depending on the type of wall.
✎Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.
2. Remove the screws from the centre back of the TV, put the screws into the clamps, and then fasten the screws onto the
TV again.
✎Screws may not be supplied with the product. In this case, please purchase the screws of the following
specifications.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string
tightly.
✎NOTE
• Install the TV near to the wall so that it does not fall backwards.
• It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on
the TV.
• Untie the string before moving the TV.
4. Verify that all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you
have any doubt about the security of your connections, contact a professional installer.
Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to
physically fix the system when using it in a public place. The appearance and
locking method may differ from the illustration, depending on the manufacturer.
Refer to the manual provided with the Kensington Lock for additional
information on proper use.
To lock the product, follow these steps:
Please find the “K” icon on the rear of the TV. A kensington slot is beside the
“K” icon.
1. Wrap the Kensington lock cable around a large, stationary object such as
desk or chair.
1
<Optional>
2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product (
1
).
4. Lock the lock.
✎These are general instructions. For exact instructions, see the User manual supplied with the locking device.
✎The locking device has to be purchased separately.
✎The location of the Kensington Lock may be different depending on the model.
69
English
Specifications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Model Name HG28ED690 HG32ED690 HG40ED690
Display Resolution 1366 x 768 1920 x 1080
Stand Swivel (Left / Right) 0˚ 20˚ / 60˚ / 90˚
Screen Size (Diagonal) 27.5 inches 31.5 inches 40.0 inches
Sound (Output) 5W x 2 10W x 2
Dimensions (WxDxH)
Body
With stand
643.4 x 62.9 x 396.5 mm
643.4 x 163.4 x 435.1 mm
721.4 x 64.9 x 428.5 mm
721.4 x 192.6 x 465.6 mm
906.6 x 65.1 x 532.9 mm
906.6 x 226.5 x 577.6 mm
Weight
Without Stand
With Stand
3.7 kg
4.1 kg
5.0 kg
6.4 kg
7.8 kg
10.7 kg
Model Name HG48ED690 HG55ED690
Display Resolution 1920 x 1080
Stand Swivel (Left / Right) 20˚ / 60˚ / 90˚
Screen Size (Diagonal) 47.6 inches 54.6 inches
Sound (Output) 10W x 2
Dimensions (WxDxH)
Body
With stand
1075.1 x 65.5 x 627.6 mm
1075.1 x 226.5 x 673.5 mm
1230.6 x 64.0 x 718.4 mm
1230.6 x 226.5 x 762.8 mm
Weight
Without Stand
With Stand
11.1 kg
14.0 kg
15.7 kg
18.6 kg
✎Design and specifications are subject to change without prior notice.
✎For power supply and power consumption information, refer to the label attached to the product.
70
English
Dimensions
Front view / Side view
yHG28ED690
1
2
5
3 6
7
8
1
2
4
5
3 6
7
8
4
(Unit: mm)
1 2 3 4 5 6 7 8
HG28ED690 643.4 609.5 347.0 311.4 396.5 435.1 62.9 163.4
yHG32ED690 / HG40ED690 / HG48ED690 / HG55ED690
1
2
5
3 6
7
8
1
2
4
5
3 6
7
8
4
(Unit: mm)
1 2 3 4 5 6 7 8
HG32ED690 721.4 700.4 394.8 451.2 428.5 465.6 49.1 192.6
HG40ED690 906.6 887.6 500.2 556.5 532.9 577.6 49.3 226.5
HG48ED690 1075.1 1056.1 594.9 556.5 527.6 673.5 49.7 226.5
HG55ED690 1230.6 1209.6 680.4 556.5 718.4 762.8 64.0 226.5
71
English
Jack panel detail / Rear view
yHG28ED690
(Unit: mm)
12345678
HG28ED690 100 100 271.7 140.5 147.3 78.7 113.5 392.4
yHG32ED690 / HG40ED690 / HG48ED690 / HG55ED690
86
7
5
(Unit: mm)
12345678
HG32ED690 200 200 242.6 95.9 176.5 114.2 110.5 477.7
HG40ED690 200 200 284.7 124.0 195.4 156.3 196.9 620.8
HG48ED690 400 400 305.9 73.6 262.8 177.5 223.3 768.0
HG55ED690 400 400 356.8 150.2 336.0 228.2 238.1 872.8
72
English
Base Stand detail
yHG28ED690
311.4
163.4 122.5
(Unit: mm)
yHG32ED690
(Unit: mm)
451.2
55.9
152
R3.75R9.5
135
192.6 123.4
73
English
yHG40ED690 / HG48ED690 / HG55ED690
(Unit: mm)
556.5
149.5
R9.5 R3.8
135
152
67
✎NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to
the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.
© 2015 Samsung Electronics Co., Ltd. All rights reserved.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country Customer Care Centre Web Site
AUSTRIA 0800 - SAMSUNG (0800 - 7267864) www.samsung.com/at/support
BELGIUM 02-201-24-18 www.samsung.com/be/support (Dutch)
www.samsung.com/be_fr/support (French)
BOSNIA 051 331 999 www.samsung.com/support
BULGARIA 800 111 31 , Безплатна телефонна линия www.samsung.com/bg/support
CROATIA 072 726 786 www.samsung.com/hr/support
CZECH 800 - SAMSUNG (800-726786) www.samsung.com/cz/support
Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 - Praha 4
DENMARK 70 70 19 70 www.samsung.com/dk/support
FINLAND 030-6227 515 www.samsung.com//support
FRANCE 01 48 63 00 00 www.samsung.com/fr/support
GERMANY 0180 6 SAMSUNG bzw.
0180 6 7267864*
(*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk
max. 0,60 €/Anruf)
www.samsung.com/de/support
CYPRUS 8009 4000 only from landline, toll free
www.samsung.com/gr/support
GREECE 80111-SAMSUNG (80111 726 7864) only from land line
(+30) 210 6897691 from mobile and land line
HUNGARY 0680SAMSUNG (0680-726-786)
0680PREMIUM (0680-773-648)
http://www.samsung.com/hu/support
ITALIA 800-SAMSUNG (726-7864) www.samsung.com/it/support
LUXEMBURG 261 03 710 www.samsung.com/support
MONTENEGRO 020 405 888 www.samsung.com/support
SLOVENIA 080 697 267
090 726 786
www.samsung.com/si/support
NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com/nl/support
NORWAY 815 56480 www.samsung.com/no/support
POLAND 0 801-172-678* lub +48 22 607-93-33 *
* (koszt połączenia według taryfy operatora)
www.samsung.com/pl/support
PORTUGAL 808 20 7267 www.samsung.com/pt/support
ROMANIA 08008 726 78 64 (08008 SAMSUNG)
Apel GRATUIT
www.samsung.com/ro/support
SERBIA 011 321 6899 www.samsung.com/rs/support
SLOVAKIA 0800 - SAMSUNG (0800-726 786) www.samsung.com/sk/support
SPAIN 0034902172678 www.samsung.com/es/support
SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com/se/support
SWITZERLAND 0800 726 78 64 (0800-SAMSUNG) www.samsung.com/ch/support (German)
www.samsung.com/ch_fr/support (French)
UK 0330 SAMSUNG (7267864) www.samsung.com/uk/support
EIRE 0818 717100 www.samsung.com/ie/support
LITHUANIA 8-800-77777 www.samsung.com/lt/support
LATVIA 8000-7267 www.samsung.com/lv/support
ESTONIA 800-7267 www.samsung.com/ee/support
TURKEY 444 77 11 www.samsung.com/tr/support