Table of Contents
- English
- Before Reading This Install Guide
- Warning! Important Safety Instructions
- 01 Package Content
- 02 The Remote Control
- 03 Controlling external devices with a remote control - Using the Universal Remote
- 04 Initial Setup
- 05 The Connection Panel
- 06 Connections
- 07 Setting the Admin Menu
- 08 Editing Channels
- 09 Specifications and Other Information
- Important Warranty Information Regarding Television Format Viewing
- SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Samsung HG43RU750N User Manual
Displayed below is the user manual for HG43RU750N by Samsung which is a product in the Hospitality TVs category. This manual has pages.
Related Manuals
HG43RU710N HG50RU710N HG55RU710N
HG65RU710N
HG43RU750N HG50RU750N HG55RU750N
HG65RU750N HG75RU750N
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at www.samsung.com
Model Serial No.
INSTALL GUIDE
English
Before Reading This Install Guide
This TV B2B (Business to Business) model is designed for hotels or the other hospitality businesses, supports a variety
of special functions, and lets you limit some user (guest) controls.
Figures and illustrations in this Install Guide are provided for reference only and may differ from the actual product
appearance. Product design and specifications may change without notice.
Operational Modes
This TV has two modes: Interactive and Standalone mode.
Interactive mode: In this mode, the TV communicates with and is fully or partially controlled by a connected Set
Back Box (SBB) or Set Top Box (STB) provided by a hospitality System Integration (SI) vendor. When the TV is initially
plugged in, it sends a command that attempts to identify the SBB or STB connected to it. If the TV identifies the
SBB or STB and the SBB or STB identifies the TV, the TV gives full control to the SBB or STB.
Standalone mode: In this mode, the TV works alone without an external SBB or the STB.
The TV has a Admin menu that lets you easily set its various hospitality functions. Please see page 28.
The menu also lets you activate or de-activate some TV and hospitality functions so you can create your optimal
hospitality configuration.
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama
uneven screen wear, which will affect image quality. To reduce the chance that this effect will occur, please follow the
recommendations below:
Avoid displaying the same TV channel for long periods.
Always try to display a full screen image.
Reduce brightness and contrast to help prevent the occurrence of after-images.
Use all TV features designed to reduce image retention and screen burn-in.
English - 2
Warning! Important Safety Instructions
Please read the Safety Instructions before using your TV.
Refer to the table below for an explanation of symbols which may be on your Samsung product.
CAUTION Class II product: This symbol indicates that a
safety connection to electrical earth (ground)
is not required. If this symbol is not present on
a product with a power cord, the product MUST
have a reliable connection to protective earth
(ground).
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
AC voltage: Rated voltage marked with this
symbol is AC voltage.
This symbol indicates that high voltage is
present inside. It is dangerous to make any kind
of contact with any internal part of this product.
This symbol indicates that this product has
included important literature concerning
operation and maintenance.
Caution. Consult instructions for use: This
symbol instructs the user to consult the install
guide for further safety related information.
The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure
reliable operation of this apparatus and to protect it from overheating, these slots and openings must never be
blocked or covered.
–
ventilation is provided.
–
–
in a wet basement, or near a swimming pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an
authorized dealer immediately.
This apparatus uses batteries. In your community, there might be environmental regulations that require you to
dispose of these batteries properly. Please contact your local authorities for disposal or recycling information.
electric shock.
Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon
or against them. Pay particular attention to cords at the plug end, at wall outlets, and at the point where they exit
from the appliance.
To protect this apparatus from a lightning storm, or when left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due
to lightning and power line surges.
Before plugging in the AC power cord of the TV, make sure that the operational voltage of the TV matches the
voltage of your local electrical power supply. Refer to the power specifications section of the manual and/or the
power supply label on the product for voltage and amperage information.
Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric shock.
To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this
apparatus.
Be sure to plug in the power cord until it is firmly seated. When unplugging the power cord from a wall outlet,
with wet hands.
If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from
it - unplug it immediately and contact an authorized dealer or service center.
Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an
extended period of time (especially when children, elderly, or disabled people will be left alone in the house).
– Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to
generate sparks and heat or by causing the insulation to deteriorate.
Be sure to contact an authorized Samsung service center for information if you intend to install your TV in a location
with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a
day such as in an airport, a train station, etc. Failure to do so may lead to serious damage to your TV.
Use only a properly grounded plug and wall outlet.
– An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
To turn off this apparatus completely, disconnect it from the wall outlet. To ensure you can unplug this apparatus
quickly if necessary, make sure that the wall outlet and power plug are readily accessible.
Store the accessories (batteries, etc.) in a location safely out of the reach of children.
service center.
not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergents.
These chemicals can damage the appearance of the TV or erase the printing on the product.
There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery.
Replace only with the same or equivalent type.
Use care when touching the TV after it has been on for some time. Some parts can be warm to the
touch.
English - 4
Contents
Before Reading This Install Guide ---------------------------------------------------------------------------- 2
Warning! Important Safety Instructions ----------------------------------------------------------------------------
01 Package Content
---------------------------------------------------------------------------- 8
Installing the wall mount kit ---------------------------------------------------------------------------- 10
Securing the TV to the Wall ---------------------------------------------------------------------------- 10
---------------------------------------------------------------------------- 11
Providing proper ventilation for your TV ---------------------------------------------------------------------------- 12
02 The Remote Control
About the Buttons on the Remote Control ----------------------------------------------------------------------------
Installing batteries into the remote control ---------------------------------------------------------------------------- 15
03 Controlling external devices with a remote control - Using the
Universal Remote
Universal Remote icon ---------------------------------------------------------------------------- 18
04 Initial Setup
Using the TV Controller ---------------------------------------------------------------------------- 21
05 The Connection Panel
06 Connections
Connecting to your Internet network ---------------------------------------------------------------------------- 24
Connecting the TV to a SBB or STB ---------------------------------------------------------------------------- 26
07 Setting the Admin Menu
Admin menu items ---------------------------------------------------------------------------- 29
USB Cloning ----------------------------------------------------------------------------
Settings Cloned in the Admin menu ----------------------------------------------------------------------------
Setting Auto Initialize ----------------------------------------------------------------------------
Updating the TV’s Software ---------------------------------------------------------------------------- 40
English - 5
08 Editing Channels
Using Channel Editor ---------------------------------------------------------------------------- 41
09 Specifications and Other Information
Specifications ---------------------------------------------------------------------------- 44
Environmental Considerations ---------------------------------------------------------------------------- 45
---------------------------------------------------------------------------- 45
---------------------------------------------------------------------------- 46
Supported Resolutions for Connecting a Computer ---------------------------------------------------------------------------- 46
Supported Resolutions for Video Signals ---------------------------------------------------------------------------- 48
Read Before Using the Internet Function ---------------------------------------------------------------------------- 49
---------------------------------------------------------------------------- 50
---------------------------------------------------------------------------- 54
Important Warranty Information Regarding Television
Format Viewing ---------------------------------------------------------------------------- 55
---------------------------------------------------------------------------- 56
English - 6
01 Package Content
Make sure the following items are included with your TV. If any items are missing, contact your dealer.
Remote Control & Batteries (AAA x 2) Power Cord Quick Setup Guide / Regulatory Guide
x 4
Wall Mount Adaptor
The items’ colors and shapes may vary depending on the models.
Cables not included can be purchased separately.
Check for any accessories hidden behind or in the packing materials when opening the box.
The screen can be damaged from direct pressure when handled
incorrectly. As shown in the figure, make sure to grip the edges
of the screen when you lift the TV.
Do Not Touch
This Screen!
Installing the LED TV Stand
Assembling the Stand and Components
When installing the stand, use the provided components and parts.
Stand Screws
1
L R
Place a soft cloth over the table to protect the TV, and then place the TV so that its screen faces down toward the
table surface.
Insert the Stands into the slot on the bottom of the TV.
Slide and assemble it to the end line in the direction of arrow.
English - 8
2
x 2
(M4 x L14)
x 2
(M4 x L14)
43″
50″- 75″
NOTE
Make sure to distinguish between the front and back of each component when assembling them.
Make sure that at least two persons lift and move the TV.
English - 9
Installing the wall mount kit
TV
TV
Wall mount
bracket
Wall mount
bracket
C
C
Wall mount Adapter
Wall mount Adapter
The Product shape may differ depending on the model.
The wall mount kit (sold separately) allows you to mount the TV on a wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact
a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any
damage to the product or injury to yourself or others if you select to install the TV on your own.
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children
do not hang on or destabilize the TV. This action may cause the TV to tip over, causing serious injuries or
death. Follow all safety precautions provided in the Safety Flyer included with your TV. For added stability
and safety, you can purchase and install the anti-fall device.
To Prevent the TV from Falling
1. Insert the screws into the wall brackets and firmly fasten them to the wall. Make sure the screws are firmly fixed to
the wall.
– We strongly recommend you drive the screws into a stud.
2. Insert the screws into the wall brackets and firmly fasten the screws to the top VESA screw holes on the back of
the TV.
3. Connect the brackets on the TV and the brackets on the wall with a strong string or cable, and then tie the string or
cable tighrly to the brackets.
– Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If
you have any doubt about the security of your connections, contact a professional installer.
– Install the TV close to the wall so that it does not fall.
– Connect the string or cable so that the brackets on the wall are at the same height or lower than the brackets on
the TV. Untie the string or cable before moving the TV.
English - 10
Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor. If you are attaching the wall mount to building
materials other than plaster board, contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall
and cause severe personal injury.
The wall mount kit is not supplied, but sold separately.
NOTE
– Standard dimensions for wall mount kits are shown in the table below.
– Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided.
–
–
specifications. Screws that are too long may cause damage to the inside of the TV set.
– For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on the wall mount specifications.
–
personal injury. Samsung is not liable for these kinds of accidents.
– Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is
used or the consumer fails to follow the product installation instructions.
–
– Always have two people mount the TV onto a wall.
TV size in
inches
VESA screw hole specs
( * ) in millimeters C (mm)Standard Screw Quantity
200 x 200
89.2
M8 4
50 462.4
55 206.5
65
400 x 400
528.8 129.1
258.4
Do not install your wall mount kit while your TV is turned on. This may result in personal injury from electric
shock.
English - 11
Providing proper ventilation for your TV
When you install your TV, maintain a distance of at least 4 inches (10 cm) between the TV and other objects (walls,
cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a problem
with the product caused by an increase in its internal temperature.
When you install your TV with a stand or a wall mount, we strongly recommend you use parts provided by Samsung
Electronics only. Using parts provided by another manufacturer may cause difficulties with the product or result in
injury caused by the product falling.
Installation with a stand Installation with a wall mount
4 inches
4 inches4 inches 4 inches4 inches
4 inches
4 inches
English - 12
02 The Remote Control
About the Buttons on the Remote Control
The images, buttons, and functions of the remote control may differ depending on the model.
The remote control has Braille points on the Power, Channel, Volume, and Select buttons and can be used by
visually impaired persons.
If you use the remote control that comes with your TV to control another TV, some functions may not operate
normally.
video sources.
Turns the sound on and off.
Channel List.
Changes channels.
Exits the menu.
Use these buttons according to the
directions on the TV screen.
Use these buttons with a specific
feature, according to the directions
on the TV's screen.
Guide (EPG).
screen.
Moves the cursor, selects the
onscreen menu items, and changes
the values seen on the TV's menu.
Turns the TV on and off.
Gives direct access to channels.
Adjusts the volume.
Selects additional digital channels
being broadcast by the same digital
station. For example, to select
Returns to the previous channel.
Automatically shuts off the TV at a
preset time.
Returns to the previous menu.
E-MANUAL
P.SIZE
Change the picture size.
CC/VD
When pressed the button, the
Accessibility Shortcuts menu
appears.
E (Select)
Press this button to select or run a
focused item.
Returns to the .
video sources.
Turns the sound on and off.
Channel List.
Changes channels.
Exits the menu.
Use these buttons according to the
directions on the TV screen.
Use these buttons with a specific
feature, according to the directions
on the TV's screen.
Guide screen.
screen.
Moves the cursor, selects the
onscreen menu items, and changes
the values seen on the TV's menu.
P (Power)
Turns the TV on and off.
Gives direct access to channels.
Adjusts the volume.
Selects additional digital channels
being broadcast by the same digital
station. For example, to select
Returns to the previous channel.
button.
Returns to the previous menu.
SLEEP
Sets the Sleep Timer.
ALARM
Enter the hour your want the TV to
turn on.
CC/VD
Accessibility Shortcuts
menu.
E (Select)
Press this button to select or run a
focused item.
Returns to the .
English - 14
Installing batteries into the remote control
Match the polarity of the batteries to the symbols in the battery compartment.
Bright light may affect the performance of the remote control. Avoid using near bright
fluorescent lights or neon signs.
The color and shape of the remote may vary depending on the model.
English - 15
03 Controlling external devices with a remote
control - Using the Universal Remote
by following instructions.
The images on your TV may differ from the images accompanying the instructions depending on the model and
geographical area.
Universal Remote Setup
Select Start to setup your TV remote as a universal remote for easy control of all your devices. Before you start, turn
on the device that you want to add. Point your TV remote at the TV, and make sure there are no obstavles between
your TV and the device.
Start Exit
1. Go to the Admin menu, and then select Universal Remote
Setting. The Universal Remote Setup screen appears.
– Admin menuUniversal RemoteUniversal Remote
Setting
Select Device Type
Set up a cable or satellite box to control it with your remote.
Home Theater OTT Box/Game C... Blue-ray Disc Pla...Cable/Satellite Box
2. If the TV is connected to a set-top box, select Cable/Satellite
Box.
Select Your TV Service Provider
Select your TV service provider so that you can control your cable or satellite box with
your Samsung remote.
Search for your service provider
3. Select your service provider from the list in the screen. If your
service provider is not listed, search manually.
Select TV Input Source
Which port on the TV did you use to connect this cable or satellite box?
HDMI 1
HDMI 2
HDMI 3
HDMI 4
4.
connected.
English - 16
Cable or Satellite Control Test
This test will check if your Samsung remote can cotrol your cable or satellite box.
During the test, point your remote at your cable or satellite box.
Please check the cable connections, and make sure your devices are turned on.
Did the channel change?
Channel Up
Channel Down
Yes No
5.
instructions on the screen in order to test whether the TV
and the set-box operate correctly when you press the remote
control buttons.
– If the TV and the set-box operate correctly, select Yes. The
– If the TV and the set-box do not operate correctly, select
No. Go to step 6.
Search for Model Number
We’re having trouble finding the right device code. Please enter the model number below
to search for your device.
Search model number
Manufacturer : Unkown
SMT-C7140
SMT-C7140
6. Follow the instructions on the screen to search for the model
number of the set-top box connected to the TV. When the
model number is found, repeat step 5 for the operation test.
Setup Complete
Now you can control your connected devices with your Samsung remote.
Done New Setup
7. When you have completed all the settings, select Done in the
following screen:
This function may not be supported depending on the model or geographical area.
Anynet+ (HDMI-CEC) function to operate external Samsung devices with your TV's remote
control without any additional setup.
Specific external devices connected to the TV may not support the universal remote feature.
control to be transmitted improperly.
Downloading the Universal Remote icon
1. Store the following files in the root directory of your USB device:
File name File type File Size
App tile stb_app_icon Jpg, png , 2MB
Source icon stb_source_icon Jpg, png , 2MB
Sources
stb_source_icon.jpg
stb_app_icon.jpg
Source
TV Remote Access
Hotel
Hotel
– The image on your TV may differ from the image above depending on the model and geographical area.
2. Go to the Admin menu, and then select Universal Remote Icon DL.
– Admin menuUniversal RemoteUniversal Remote Icon DL
– The Universal Remote Icon DL is only available after you have completely set up the Universal Remote.
English - 18
04 Initial Setup
When you turn on your TV for the first time, it immediately starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your viewing environment.
If you already completed the Initial Setup, run the Initial Setup again using the following menu.
OAdmin menuSystemTV Reset
If you select TV Reset, the TV resets all values to their factory defaults. When the TV turns off, press the Power button on
the remote control to turn on the TV. The TV starts the Initial Setup.
1
Select the region settings
Before select region, refer to the country list information on the right.
If you select the incorrect region, execute TV Reset again after the Initial Setup is completed.
If the region is changed, the TV automatically turns off and on.
2
Selecting your TV installation type
TV Basic Setup: Select to proceed to the next step to set the basic options for using your TV.
Cloning Mode: Copy the system settings from the USB or server to the TV.
Factory Menu: End Initial Setup and go to Admin menu directly.
3Selecting your language
4Set a room number.
Change the TV name to reflect a room number.
5
Connecting to the Internet
Connect to an available wired or wireless network.
–
it is plugged in, check if the access point is turned on. If it is on, turn it off, wait 1 or 2 minutes, and then turn it on.
wireless access point's user manual for more information.
6
Agreeing to the Smart Hub service agreement, and the collection and use of personal information
To use , you must agree to the service agreement, and the collection and use of personal
information. Without giving consent, you cannot use the additional features and services.
7
Enterprise Enrollment
Sign in to your Samsung account to remotely manage the configuration of this TV from the LYNK Cloud.
– This step is only supported for the series model.
English - 19
8
Enter Your Zip code
Enter your location to quickly find your service providers and set up your TV.
– This step is not available depending on the geographical regions.
9
Select your TV source
Select the type of broadcast signals the TV receives. Then, channel scanning starts.
After channel scanning is completed, select Next or press the right directional button on the remote control.
When the RF cable is not connected, this step is skipped.
10
Setting the current time
Select your time zone on the map that appears.
Set DSTNo, Yes or Auto to apply to the TV.
If the TV will be tuned to digital broadcast channels, and these channels transmit date and time information, set the
Clock Mode to Auto. The TV will set the date and time automatically.
If the TV will not be tuned to digital broadcast channels, set the Clock Mode to Manual, and then set the date and time
on the TV manually.
11 TV setup summary
12
Setup complete
Select apps to add to , and then try using your remote control and see if it works.
Select the Start Watching TV button to complete the Initial Setup. Then Admin menu appears. Press Power button to
exit.
If you enter the zip code in step 8, step 10 is skipped.
English - 20
Using the TV Controller
TV Controller button at the bottom of the TV, and then use the Control menu. The
Control menu appears when the TV Controller button is pressed while the TV is On. For more information about its
usage, refer to the figure below.
The screen may dim if the protective film on the SAMSUNG logo or the bottom of the TV is not detached. Please
remove the protective film.
Control menu
:Power Off :Volume Up
:Channel Up :
: :Source
TV Controller button / Remote control sensor
Press: Move
Press & Hold: Select
The TV Controller button is located on the bottom of the TV.
English - 21
05 The Connection Panel
➀
➁
➂
➃
➄
➆➅
TV Rear Panel
When connecting an external device, match the color of the connection port to the cable.
Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off.
① DIGITAL AUDIO OUT (OPTICAL)
② USB (5V 0.5A), USB (HDD 5V 1A)
– Connector for software upgrades and Media Play, etc.
– Service connection.
③ HDMI IN 1, 2, 3 (ARC)
–
and video.
–
contact to a Samsung service center.
English - 22
④ ANT IN
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system
⑤ COMPONENT IN / AV IN
–
VCRs.
– Connect audio cables to R-AUDIO-L on your TV and the other ends to corresponding audio out ports on AV
(Composite) devices.
– Connect component video cables (not supplied) to the component ports (PR, PB, Y) on your TV and the other
–
PR, PB, Y) on your TV.
– The PR, PB and YR-Y, B-Y and Y or Cr, Cb and
Y.
– For AV (Composite), connect RCA audio cables (not supplied) to R-AUDIO-L on your TV set and the other ends
to corresponding audio out ports on an external device.
– When your are connecting a AV (Composite) device to AV IN [Y/Video], connect the video cable (yellow) to the
AV IN [Y/VIDEO] port (green/yellow).
⑥ DATA
– Used to support data communication between the TV and the SBB or STB.
– Connects using phone-jack type plugs.
– For more information about the data cables, refer to page .
⑦ LAN
06 Connections
Connecting to your Internet network
wired or wireless connection.
After you have physically connected the TV to your network, you must configure the network connection to
Admin menu
(Admin menuSmart ServiceNetwotk Setup).
Establishing a wireless Internet connection
Connect the TV to the Internet using a standard wireless access point or modem.
Wireless IP access point or
This TV supports the IEEE 802.11 a /b /g /n /ac communication protocols. Samsung recommends using IEEE
802.11n. Otherwise, when you play video over a network connection, the video may not play smoothly.
– Some of the IEEE 802.11 communication protocols may not be supported depending on the model or
geographical area.
To use a wireless network, the TV must be connected to a wireless access point or modem. If the wireless access
Select a channel that is not currently in use for the wireless access point. If the channel set for the wireless access
point is currently being used by another device, the result is usually interference and/or a communications failure.
Most wireless networks have an optional security system. To enable a wireless network's security system, you need
to create a security key using characters and numbers, and then enter that key into the access point through its
English - 24
Network Security Protocols
The TV only supports the following wireless network security protocols:
in networks running in the 802.11n mode.
If the wireless access point supports WPS (Wi-Fi Protected Setup), you can connect the TV to your network using PBC
WPA key settings.
Establishing a wired Internet connection
There are three main ways to connect the TV to your network using cable, depending on your network setup. They are
illustrated below:
The Modem Port on the Wall
Modem Cable (Not Supplied)
TV Rear Panel
External Modem
TV Rear PanelThe Modem Port on the Wall
Modem Cable
(Not Supplied)
(Not Supplied)
(Not Supplied)
External Modem
IP access point that
TV Rear Panel
The TV will not be able to the Internet if your network speed is less than 10 Mbps.
English - 25
Connecting the TV to a SBB or STB
ETH MODEM
TV Rear Panel
STB (SBB)
Connect the DATA port of the TV to the ETH MODEM
The ETH MODEM
IR signals sent by the remote control to the TV or SBB / STB must meet the following specification to use IR pass
through function.
IR signal reciever specification
– ㎑
–
–
– Minimum Gap Time Between the burst (tburst gap): 16 pulses (422 us)
– Minimum Gap Time between the data commands (tpause): 25 ㎳
English - 26
List of Hospitality SI Vendors and compatible data cables supplied with the TV
Confirm you are using the correct data cable for your SI vendor. Refer to the code label on the data cables.
Contact your nearest dealer or your SI Vendor to buy the data cable not included in the TV.
1
6
1
2
3
4
5
TV side STB (SBB) side
Cable code Pin assign SI Vendor
TV SIDE
1: NC
2: RX
3: TX
4: IR
5: GND
STB (SBB) SIDEP1 P2
31
52
63
14
25
1: IR
2: GND
3: NC
4: NC
5: RX
6: TX
RED
GREEN
WHITE
BLACK
YELLOW
SAMSUNG and
others
TV SIDE
1: CLK
2: RX
3: TX
4: IR
5: GND
P1 P2
61
52
33
14
25
1: IR
2: GND
3: TX
4: NC
5: RX
6: CLK
RED
GREEN
WHITE
BLACK
YELLOW
STB (SBB) SIDE
MTI
RX and TX notation is based on TV.
07 Setting the Admin Menu
To access the Admin menu, press the
following buttons on the remote control:
1. Press the MUTE button.
2. Press the 1 button.
3. Press the 1 button.
4. Press the 9 button.
5. Press the SelectE button.
To control the TV functions in the Admin menu, the TV has two modes, the Standalone mode and the Interactive mode.
The menu items that differ between the modes are listed below.
Menu items in the Standalone mode only:
SI Vendor: SSCP
LYNK CloudLYNK HMSVirtual Standby, Room Number and its submenus.
– series model.
Menu items in the Interactive mode only:
SI Vendor: Samsung and other vendors.
All other items appear in both modes.
After a menu appears, follow these general directions to navigate and change values:
Use the directional buttons on the remote control to move from menu item to menu item.
Press the Select button on the remote control to select a menu item. The screen displays that menu item only.
Press the left or right directional button to change a value. The right directional button increases numerical values.
The left arrow button decreases numerical values.
When the screen is displaying one menu item, you can press the up or down directional button to display the next
or previous menu item.
Press the RETURN button to exit the current menu item and go to a higher menu level.
To exit a Admin menu, turn off the TV, and then turn it on again. Any changes you made are saved except changes
to SI (System Integration) vendor. For changes to SI vendor, you must turn the TV off, wait until the power indicator
at the bottom of the TV glows steadily. And then unplug the TV, wait for the power indicator to go off, and then plug
the TV in again.
To change menus between the Interactive mode and the Standalone mode, follow the steps below:
1. Hospitality Mode menu item in the top left corner of the menu.
2. Press the Select button on the remote control. Only the Hospitality Mode menu item is displayed.
3. Press the left or right directional button to change the Hospitality Mode item from Standalone to Interactive or
from Interactive to Standalone.
4. Press the RETURN button on the remote control. The entire menu re-appears with your selection displayed in the
Hospitality Mode item.
– After you have set the values in one TV, you can clone those values to multiple TVs.
– For more information about the USB cloning refer to page .
English - 28
Admin menu items
To exit from this menu, turn off (or turn off and unplug the power cable if you have changed SI vendor) the TV, and then
turn on again. Any changes you made are saved.
The menu items may not be supported depending on the models.
Admin menu Item Description
Hospitality Mode
Select Hospitality Mode.
Interactive: TV works with an SI STB or SBB.
Standalone: TV works alone, without an SI STB or SBB.
SI Vendor
Interactive: Samsung / OCC / MTI / Nstreams / Enseo / Cardinal / Guestek /
SeaChange / / Innvue
Standalone: OFF / SSCP
SI Config MDC ID Settings Assigns an individual MDC ID.
This function only available when MDC is selected in Interactive SI Vendor.
Power On
Power On Channel
Set the channel to display when the TV is turned on.
User DefinedPower On Channel
Num. See Power On Channel Num below.
Last Saved: If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
Power On Channel Num When the TV is turned on, it switches automatically to this channel.
Power On Channel Type
Select the type of the channel will be displayed when the TV is turned on.
ATV (analog air band), DTV (digital air band), CATV (analog cable band), CDTV (digital
cable band), IPTV (IP channel, IPTV is set when deployed from solution.)
Power On Volume
Set volume level when the TV is turned on.
User Defined
Last Saved: When the TV is turned on, it returns to the volume that had been set
when the power had been turned off.
Power On Volume Num The TV turns on with set volume level in Standalone mode.
Min Volume The minimum volume level the user can set in Standalone mode.
Max Voume The maximum volume level the user can set in Standalone mode.
Power On Source Select the input source to be displayed when the TV is turned on.
Power On Option
unplugged the TV and then plugged it in again.
Last Option: Returns to its last power state. If it was in standby mode, it returns to
standby mode. If it was on, it turns on.
Power ON: When the power returns, the TV turns on.
Standby: When the power returns, the TV enters the standby mode.
English - 29
Admin menu Item Description
Channel
Channel Setup Gives you direct, immediate access to some of the channel menu functions on the
Broadcasting menu such as Auto Program, Audio Options, etc.
Channel Editor
Change the channel numbers and names, manage genre and language groups
and delete channels.
Apply the Screen Off to channels you select. The Screen Off blanks out the video
from a channel and outputs only audio.
display each channel directly.
Mixed Channel Map
Enables showing/browsing all antenna type (Air/Cable) channels at the same time.
ON: When set to on, guests can access the complete channel map irrespective of
the selected antenna type. The Channel List/Channel Editor will also populate Air
as well Cable type channels.
OFF: When set to off, guest can access the channel map corresponding to the
selected antenna type (Air/Cable) only. The Channel List/Channel Editor will only
show the selected antenna type channels.
– This function is set to ON automatically in Interactive mode.
Dynamic SI
ON:
Channel Editor.)
OFF
program channel number in Channel Editor. While TV do not support auto
channel number update.)
Mychannel Enable or disable the My Channel function.
This function is not available when set to Hospitality Mode: Standalone.
Menu OSD
Picture Menu Lock Enable or disable the Picture menu.
Menu Display ON: The main menu is displayed.
OFF: The main menu is not displayed.
Channel Menu Display OFF: Broadcasting menu is disable for guest.
ON: Broadcasting menu is enable for guest.
Panel Button Lock
Turning the TV Controller button operations on or off.
Unlock: Unlocks TV Controller button.
Lock
OnlyPowerpower off function.
Menu/Source
Clock
Local Time
Select the way to update the clock data
Auto
Interactive mode.
Manual: The clock is set manually by the user when the TV is in Standalone mode.
Time Channel: The clock is set from the selected channel.
Time Channel Type Select the type of the channel to update the clock data.
This function is only available Local Time set to Time Channel.
Time Channel Num Select the number of the channel to update the clock data.
This function is only available Local Time set to Time Channel.
Admin menu Item Description
External
Source USB Pop-up Screen
When USB is connected to the TV :
Default: A popup window appears.
Automatic: This enters the USB content menu automatically.
Disable: Neither the popup window nor the menu appears.
Eco
Solution Power Saving Mode ON: Turns on the energy saving function.
OFF: Turns off the energy saving function.
Cloning
Clone TV to USB Clone the current TV options to a USB device.
Clone USB to TV Clone the saved TV options on a USB device to the TV.
Setting Auto Initialize If you set Setting Auto Initialize to On, and the TV's power is turned off and on, TV
menu items are restored again to their values cloned initially.
Smart
Service
Network Setup
Run the Network
following items:
Network Status: View the current network and Internet status.
Open Network Settings: Connect to an available network.
Reset Network: Restore the network settings to the factory default.
Expert Settings: Configure advanced network settings.
Download by App ID
Apps Editable
Provide a way to enable or disable the APPS and Notification Settings menu.
ON: Enable the APPS and Notification Settings menu.
OFFAPPS and Notification Settings menu.
Terms & Policy View the entire text of the Terms & Policy document.
service agreement.
Smart Features
Run the Smart Features menu.
Autorun Smart Hub: If Autorun Smart Hub is set to On, the TV automatically
displays the when you turn on the TV.
Home App Preview Editor
Quick Settings Editor Edit the items to be displayed in Quick Settings and change their order.
Universal
Remote
Universal Remote Setting Run the Universal Remote Setup function.
Universal Remote Icon DL Universal Remote icons from USB device and applying
downloaded icons to the connected Universal Remote source.
Admin menu Item Description
Security
Factory Lock
Admin menu.
ON: The password is needed before entering Admin menu.
OFF
Password Popup
Enable or disable password input popup window. If this option is set to off, the TV will
not display the password input popup window when entering the Admin menu. If set
to ON, the password input popup window appears.
Password Input
If this function is enabled, the password input popup window appears which asks for
an 8-character security password. The admin must enter a password before applying
or updating security preferences. After the correct password is entered, options such
as Password Setting, Password Reset and Security Mode are available.
Password Setting User can change the password.
Password Reset Password is reset to "00000000."
Security Mode
Provides password protected administrative fucntionality to enable or disable
features of hospitality TV, such as USB, HDMI. To use this option, Security Mode set
to ON. After Security Mode set to ON, options such as USB, HDMI are automatically
enabled. Clone USB to TV and TV Reset will be disabled in the Admin menu.
USB Enable or disable USB access. If this function is set to Disable, access to USB media is
blocked.
HDMI Enable or Disable
DRM DRM Mode
OFF
LYNK DRM: Select to turn on support only.
System
Self Diagnosis for HTV
STB SI Vendor Setting
–
problems with the communications with the SI STB or SBB, use this diagnosis
function. If your broadcasting system does not have a problem, contact a
Samsung service center. If STB SI Vendor Setting appears to have failed and
communication with the SI STB or SBB has failed, first check your SI STB or SBB.
If your SI STB or SBB does not have a problem, contact to a Samsung service
center.
Self Diagnosis
for TV
Run the Self Diagnosis menu.
Start Picture Test: Use this test when you experience a problem with your TV's
picture.
Start Sound Test: Use this test when you experience a problem with your TV's
sound.
Signal Information: Show digital broadcasting signal information.
Start Smart Hub Connection Test: If the TV has trouble with network connection
or TV services, check the connection status.
Reset Smart Hub: Reset the and Samsung account settings stored on
your TV.
Reset: Restore all TV settings, excluding network settings, to the factory defaults.
Admin menu Item Description
System
System Manager
Gives you direct, immediate access to System Manager functions such as Time,
Language, Change PIN.
System Manager allow you to adjust your TV's system and customise settings for your
viewing environment.
OTN Update
present on server.
SW Update
About This TV
information.
Standby LED
When the TV is in standby mode, you can configure the settings of the power
indicator.
ON
OFF
TV Reset Returns all settings on the TV to their factory defaults.
* LYNK
Cloud
Enrollment LYNK Cloud Solution.
Enrollment Status Check the status of the TV enrollment in the LYNK Cloud service.
* LYNK
HMS
HMS Mode HMS Mode. When set to ON, the TV can operate with the
server through the IP network.
Server URL Setting server's address. (Example: )
Gateway Role
When there is one TV per room, set to Master.
When there are more than one TVs per room, set the main TV to Master and the
others to Slave.
** Virtual
Standby
Virtual Standby Mode
When the AC power cord is plugged in and the power is off, this option maintains the
TV's important features even after the screen is off.
Electricity consumption may vary depending on the environment.
Reboot Time After the TV power is off (in Virtual Standby Mode) if there is no input from the user
within the set Reboot Time, the TV will reboot and enter Virtual Standby Mode again.
Room Number When Device Name menu is
launched, enter the room number.
series model.
Enrollment Status in LYNK Cloud is set to ON or HMS Mode in LYNK HMS is set
to ON. This function is only supported for the series model.
Refer to the manual of each solution for details about functions and settings of the solutions such as ,
.
USB Cloning
OAdmin menuCloning
The USB cloning function lets you download user-configured settings (Picture, Sound, Broadcasting, Admin menu and
so on) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you
create a standard file of settings and distribute that standard file to all the TVs in your facility.
After cloning, certain features are applied when the TV is turned on again.
Cloning TV to USB: Copies stored menu settings from a TV to a USB device
OAdmin menuCloningClone TV to USB
1. Insert a USB device into the USB port on the rear of the TV.
2. Go to the Admin menu.
3. Press the up or down directional button to select Clone TV to USB, and press the Select button on the remote
control.
– The clone folder will be labeled T-MSMAKUC / T-MSLAKUC.
– The cloned values include the values on the guest side menu (Picture, Sound, Broadcasting and so on) and the
Admin menu.
Cloning USB to TV: Copies menu settings and channel data in a USB device to a TV
To clone data to the TV using the Admin menu, follow these steps:
1. Turn the TV off.
2. Insert the USB device into the USB port on the rear of the TV.
3. Turn the TV on.
4. Go to the Admin menu.
5. Press the up or down directional button to select Clone USB to TV, and press the Select button on the remote
control.
6. The message Clone settings from USB to TV is displayed. Press the Select button on the remote control.
– If there is no file to copy on the USB device or the message that there is no file appears, check the folder on your
USB device.
– The folder name should be T-MSMAKUC / T-MSLAKUC.
– Tables that list the settings that are cloned in the Admin menu begin on the next page.
"Turn the TV off, insert the USB device, turn the TV on, and then press the Select button on the remote control for 5
seconds.
Pre-condition for cloning (check point)
Cloning should be done between same model (same version).
Before cloning, all displays should be updated at the latest version (same version).
Settings Cloned in the Admin menu
The menu items may not be supported depending on the models.
Menu Item Sub Item Cloned or not
Standalone / Interactive
SI Vendor
Interactive mode :
Samsung / OCC / MTI / Nstreams / Enseo /
Standalone mode :
OFF / SSCP
SI Config 00-99
Power On
Power On Channel
Power On Channel Num
Power On Channel Type
Power On Volume
Power On Volume Num 0~100
Min Volume 0~100
Max Volume 0~100
Power On Source
Power On Option
Channel
Channel Setup
Channel Editor
Mixed Channel Map ON / OFF
ON / OFF
MyChannel ON / OFF
ON / OFF
ON / OFF
ON / OFF
Clock
Standalone: Manual / Time Channel
Interactive: Manual / Auto / Time Channel
Time Channel Type
Time Channel Num
External Source USB Pop-up Screen
Eco Solution Power Saving Mode ON / OFF
Cloning
Clone TV to USB No
Clone USB to TV No
Setting Auto Initialize ON / OFF
Menu Item Sub Item Cloned or not
Smart Service
Network Setup No
Apps Editable ON / OFF
Terms & Policy
Smart Features : ON / OFF
Quick Settings Editor
Universal
Remote
Universal Remote Setting No
Security
ON / OFF
Password Popup ON / OFF
Password Input No
Password Setting
Password Reset No
Security Mode ON / OFF
USB
System
STB SI Vendor Setting Si Name Success / Failure No
No
System Manger No
OTN Update ON / OFF
SW Update No
About This TV No
ON / OFF
TV Reset No
Enrollment No
Enrollment Status Connected to the lynk cloud: Active / Not Active
Not connected to the lynk cloud: Failure No
ON / OFF
Gateway Role Master / Slave
Standby
Virtual Standby Mode ON / OFF
Reboot Time
Room Number No
series model.
Setting Auto Initialize
OAdmin menuCloningSetting Auto Initialize
When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings:
Picture, Sound, Broadcasting, Admin menu and so on. This lets you set nearly all of the menu values on your hospitality
TVs to the same, standard settings. If you allow guests access to the guest side menus, for example the Picture menu,
they can change the settings in those menus so they are no longer standard. If you set the Setting Auto Initialize
function to on, the TV automatically restores (initializes) any guest side menu values to the cloned, standard values
when the TV is turned off and then turned on again. Note that Setting Auto Initialize works on cloned guest side menu
values only. Settings which have not been cloned are ignored.
The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize
function to on.
The menu items may not be supported depending on the models.
Menu Item
Picture
Picture Mode
Picture Size Settings Picture Size
Fit to Screen
Expert Settings
Backlight
Brightness
Contrast
Sharpness
Color
Tint (G/R)
Apply Picture Settings
Auto Motion Plus
Settings
Auto Motion Plus
Judder Reduction
Contrast Enhancer
Film Mode
Color Tone
Menu Item
Picture Expert Settings
White Balance
2 Point
R-Gain
G-Gain
B-Gain
R-Offset
G-Offset
B-Offset
20 Point Settings
20 Point
Interval
Red
Green
Blue
Gamma
ST.2084
BT.1886
RGB Only Mode
Color Space Settings
Color Space
Color
Red
Green
Blue
Sound
Sound Output
Sound Mode
Expert Settings
Balance
Equalizer
Auto Volume
Sound Feedback
Broadcasting Audio Options
Menu Item
General
System Manager Time Clock
Clock Mode
Time Zone
Manager
Game Mode
Input Signal Plus
Eco Solution
Power Saving Mode
Auto Power Off
Accessibility
Grayscale
Color Inversion
Enlarge
Updating the TV’s Software
the software update. Video and audio settings will be reset to their defaults after a software update. We recommend
you clone the TV's settings so that you can easily reset them after the upgrade.
For more information about the USB cloning function, refer to page .
Updating through a USB device
To update the TV's software, follow these steps:
1. Insert a USB device containing the software update file into the USB port of the TV.
2. Run SW Update.
– Admin menuSystemSW Update
3. The TV displays a pop-up message that checks for the updated version.
4. Move the focus to OK, and then press the Select button on the remote control.
– Please be careful to not disconnect the power or remove the USB device while upgrades are being applied. The
TV will turn off and turn on automatically after completing the SW upgrade. Please check the SW version after the
upgrades are complete.
English - 40
08 Editing Channels
Using Channel Editor
OAdmin menuChannelChannel Editor
Using Channel Editor you can edit the channels stored in the TV's memory.
Change the channel numbers and names, edit the channel language and channel genre and delete channels.
If you set the Screen Off function to On for the selected channels, a screen off message is displayed, and pictures
are turned off by the Screen Off function and only audio is output from those channels.
Channel Editor also lets you view information about each channel easily, without your having to display each
channel directly.
General Steps for Using the Channel Editor in Standalone Mode
– The image on your TV may differ from the image above depending on the model and geographical area.
1. Run Channel Setup (ChannelChannel Setup) in the Admin menu.
2. Enter Channel Editor (ChannelChannel Editor) in the Admin menu.
3. On a piece of paper, compile a list of channels you want to have, arranged in the order you want.
4.
5. Press the EXIT or RETURN button to exit.
English - 41
Editing the Channel Number
Change the channel number of a channel you select. To change a channel number, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Use the directional buttons on the remote control, move the focus to Edit Channel Number, and press the Select
button.
3. Use the up or down directional buttons on the remote control to change the channel number.
4. Move the focus to OK when done, and then press the Select button on the remote contorl.
– When you change the channel number, the channel information is updated automatically.
Rename the Channel
Change the name of a channel you select. To change the name of a channel, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Use the directional buttons on the remote control, move the focus to Rename Channel, and then press the Select
button.
3. Use the on-screen keyboard that appears to enter the new name for the channel. Use the directional buttons on
the remote control, move the focus a letter or number, and then press the Select button. Repeat for each letter or
number you want to enter.
4. When finished, move the focus to Done, and then press the Select button on the remote control.
English - 42
Assigning the Channel Number to the external device
The external device source of the TV are displayed in the last page of the Channel Editor menu as shown below.
1. Select a external device source on the Channel Edit screen.
2. Use the directional buttons on the remote control, move the focus to Edit Channel Number, and press the Select
button.
3. Use the up or down directional buttons on the remote control to assign the channel number.
4. Move the focus to OK when done, and then press the Select button on the remote control.
– Once you assign a channel number to an external device, you can enter the external device without opening the TV
source menu.
09 Specifications and Other Information
Specifications
Model Name
Display Resolution
Screen Size
Diagonal
Measured Diagonally
42.5 inches
49.5 inches
Sound (Output) 20 W20 W
Dimensions (W x H x D)
Body
With stand
inches
mm)
inches
mm)
inches
(1124.8 x 650.2 x 59.1 mm)
inches
mm)
Weight
Without Stand
With Stand
21.2 lbs (9.6 kg)
21.6 lbs (9.8 kg)
lbskg)
lbskg)
Model Name
Display Resolution
Screen Size
Diagonal
Measured Diagonally
54.6 inches
64.5 inches
Sound (Output) 20 W20 W
Dimensions (W x H x D)
Body
With stand
inches
mm)
inches
mm)
inches
mm)
inches
mm)
Weight
Without Stand
With Stand
lbskg)
lbskg)
55.1 lbs (25.0 kg)
56.2 lbs (25.5 kg)
English - 44
Model Name
Display Resolution
Screen Size
Diagonal
Measured Diagonally
inches
Sound (Output) 20 W
Dimensions (W x H x D)
Body
With stand
inches
(1684.6 x 966.4 x 60.1 mm)
inches
mm)
Weight
Without Stand
With Stand
81.6 lbskg)
lbskg)
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50°F to 104°F (10°C to 40°C)
Notes
For information about the power supply, and more information about power consumption, refer to the information
on the label attached to the product.
– On most models, the label is attached to the back of the TV. (On some models, the label is inside the cover
terminal.)
model.
All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the
dimensions before installing your TV. Not responsible for typographical or printed errors.
Recommended hours of use per day of this product is under 8 hours. If the product is used for longer than 8 hours a
day, the warranty may be void.
Decreasing power consumption
When you shut the TV off, it enters Standby mode. In Standby mode, it continues to draw a small amount of power. To
decrease power consumption, unplug the power cord when you don't intend to use the TV for a long time.
English - 45
Supported Resolutions for UHD Input Signals
If Input Signal Plus is set to Off
Frame rate (fps)
Sampling
50 / 60 8 bit - - - O
If Input Signal Plus is set to On
Frame rate (fps)
Sampling
50 / 60
8 bit O O O O
10 bit - - O O
12 bit - - O O
Supported Resolutions for Connecting a Computer
When you use your TV as a computer monitor, you can also select one of the standard resolutions listed in the
Resolution column. The TV will automatically adjust to the resolution you choose.
Mode Resolution Display
format
Horizontal
frequency (KHz)
Vertical frequency
(Hz)
Clock frequency
(MHz)
Polarity (horizontal
/ vertical)
IBM -/+
MAC
640 x 480 -/-
-/-
68.681 100.000 -/-
VESA DMT
640 x 480 60 59.940 - / -
640 x 480 - / -
640 x 480 - / -
800 x 600 60 40.000 + / +
800 x 600 50.000 + / +
800 x 600 49.500 + / +
60 60.004 65.000 - / -
- / -
+ / +
1152 x 864 108.000 + / +
60 45.000 60.000 + / +
1280 x 800 60 59.810 - / +
1280 x 1024 60 60.020 108.000 + / +
1280 x 1024 + / +
1440 x 900 60 106.500 - / +
1600 x 900 60 60.000 60.000 108.000 + / +
1680 x 1050 60 65.290 59.954 146.250 - / +
1920 x 1080 60 60.000 148.500 + / +
English - 46
Mode Resolution Display
format
Horizontal
frequency (KHz)
Vertical frequency
(Hz)
Clock frequency
(MHz)
Polarity (horizontal
/ vertical)
VESA CVT 2560 x 1440 60 59.951 241.500 + / -
2560 x 1440 120 192.996 119.998 + / -
CTA-861
100 112.500 100.000 + / +
120 + / +
- / -
60 60.000 594.000 - / -
100 225.000 100.000 1188.000 + / +
120 120.000 1188.000 + / +
100 225.000 100.000 1188.000 + / +
120 120.000 1188.000 + / +
The interlaced mode is not supported.
The set might operate abnormally if you select a non-standard video format.
Separate and Composite modes are supported. SOG (Sync On Green) is not supported.
Set Apps Editable to ON to change the input source (Edit Name/Icon) manually.
– Admin menuSmart ServiceApps Editable
Supported Resolutions for Video Signals
Check the resolutions supported for video signals.
Mode Resolution Display
format
Horizontal
frequency (KHz)
Vertical frequency
(Hz)
Clock frequency
(MHz)
Polarity (horizontal
/ vertical)
CTA-861
50 15.625 50.000 - / -
60 59.940 - / -
50 50.000 - / -
60 59.940 - / -
50 50.000 + / +
60 45.000 60.000 + / +
1920 x 1080i 50 28.125 50.000 + / +
1920 x 1080i 60 60.000 + / +
1920 x 1080 24 24.000 + / +
1920 x 1080 25 28.125 25.000 + / +
1920 x 1080 + / +
1920 x 1080 50 56.250 50.000 148.500 + / +
100 112.500 100.000 + / +
120 + / +
1920 x 1080 60 60.000 148.500 + / +
24 54.000 24.000 + / +
25 56.250 25.000 + / +
+ / +
50 112.500 50.000 594.000 + / +
60 60.000 594.000 + / +
100 225.000 100.000 1188.000 + / +
120 120.000 1188.000 + / +
4096 x 2160 24 54.000 24.000 + / +
4096 x 2160 25 56.250 25.000 + / +
4096 x 2160 + / +
50 112.500 50.000 594.000 + / +
60 60.000 594.000 + / +
100 225.000 100.000 1188.000 + / +
120 120.000 1188.000 + / +
VESA CVT 2560 x 1440 60 59.951 241.500 + / -
2560 x 1440 120 192.996 119.998 + / -
Set Apps Editable to ON to change the input source (Edit Name/Icon) manually.
– Admin menuSmart ServiceApps Editable
English - 48
Read Before Using the Internet Function
Read this information before using the Internet function.
File download is not supported.
The Internet function may not be able to access certain websites, including websites operated by certain
companies.
The TV does not support playback of flash videos.
E-commerce for online purchases is not supported.
ActiveX is not supported.
Only a limited number of fonts are supported. Certain symbols and characters may not be displayed properly.
The response to remote commands and the resulting on-screen display may be delayed while a web page is
loading.
systems.
Copy and paste operations are not supported.
When composing an email or a simple message, certain functions such as the font size and color selection may not
be available.
There is a limit to the number of bookmarks and the size of the log file that can be saved.
The number of windows that can be opened concurrently is limited.
Web browsing speed will differ with the network environment.
Browsing history is saved from latest to oldest, with the oldest entries being overwritten first.
audio files.
Video sources from PC-optimized streaming service providers may not play properly on our proprietary Internet
browser.
English - 49
Dimensions
Front view / Side view
The displayed image may differ from your TV, depending on the model.
(Unit: inches)
20.9 22.2 25.1
(Unit: inches)
25.6
English - 50
(Unit: inches)
48.8
26.9 28.1
(Unit: inches)
(Unit: inches)
65.0
2.4
14.0
41.6
English - 51
Port panel detail / Rear view
Base Stand detail
The displayed image may differ from your TV, depending on the model.
(Unit: inches)
1.4
6.6
(Unit: inches)
English - 52
(Unit: inches)
1.9
(Unit: inches)
2.1
8.4 14.0
Licenses
CONTENT.
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com)
English - 54
Important Warranty Information Regarding
Television Format Viewing
See the warranty card for more information on warranty terms.
stationary graphics and images on screen, such as the dark sidebars on nonexpanded standard format television video
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station
features, use these controls to view different formats as a full screen picture.
selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.
English - 55
SAMSUNG ELECTRONICS NORTH AMERICAN
LIMITED WARRANTY STATEMENT
Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained
herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products
purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period
originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this
to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions
covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal
use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or
maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
In the United States: 1-866-sam4biz
English - 56
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the Samsung
service center.
Samsung Hospitality Hotline 1-866-sam4biz (US)
Web site: http://www.samsung.com/us/business