Table of Contents
- English
- Accessories
- Installing the LED TV Stand
- Using the TV's Controller
- The Connection Panel
- The Remote Control
- Using the Samsung Smart Control
- Connecting to the Network
- Connecting the TV to an SBB or STB
- Setting the Hotel Option Data
- Installing the Wall Mount
- Anti-theft Kensington Lock
- Specifications
- Supported Resolutions for UHD Input Signals
- Display Resolution
- Dimensions
- Important Warranty Information Regarding Television Format Viewing
- License
Samsung HG49NE890UFXZA User Manual
Displayed below is the user manual for HG49NE890UFXZA by Samsung which is a product in the TVs category. This manual has pages.
Related Manuals
Thank you for purchasing Samsung product.
To receive more service, please register your
product at
www.samsung.com/register
Model Serial No.
LED TV
Installation manual
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
Introduction
and lets you limit some user (guest) controls.
Operational Modes
This TV has two modes: Interactive and Stand-alone mode.
y
full control to the SBB or STB.
y
The TV has a Hotel (Hospitality) Menu that lets you easily set its various hospitality functions. Please see pages 22 to 26.
Still image warning
yAvoid displaying the same TV channel for long periods.
yAlways try to display a full screen image.
y
y
Ensuring Proper Ventilation
ventilation.
✎
–
to serious injury.
Installation with a stand. Installation with a wall-mount.
Additional Information
✎The appearance of the TV and its accessories may differ from the illustrations in this manual, depending on the TV.
✎
3
Contents
ENGLISH
English
Symbols Used in this Manual
t
TOOLS
Indicates that you can press the
TOOLS
control to use this function.
NOTE One-Touch Button
yAccessories ....................................................................................................................................................................
yInstalling the LED TV Stand ....................................................................................................................................... 5
yUsing the TV's Controller ............................................................................................................................................ 7
yThe Connection Panel .................................................................................................................................................. 8
yThe Remote Control ..................................................................................................................................................... 10
yUsing the Samsung Smart Control ........................................................................................................................... 12
yConnecting to the Network ........................................................................................................................................ 17
yConnecting the TV to an SBB or STB ......................................................................................................................... 19
ySetting the Hotel Option Data ................................................................................................................................... 21
y ...........................................................................................................................................
yAnti-theft Kensington Lock ........................................................................................................................................
y ................................................................................................................................................................
ySupported Resolutions for UHD Input Signals .......................................................................................................
yDisplay Resolution .......................................................................................................................................................
yDimensions .................................................................................................................................................................... 50
y .......................................................... 52
yLicense ...........................................................................................................................................................................
4
English
Accessories
✎Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
✎The items’ color and shape may vary, depending on the model.
✎The parts for the stand are listed under Stand Components on the following page.
List of Parts
Remote Control (AA59-00817A) &
Samsung Smart Control
Power Cord
Safety Guide / Quick Setup Guide /
Regulatary Guide
(depending on the model)
COMPONENT IN / AV IN Adapter
5
English
Installing the LED TV Stand
Components
1 EA
AB
1 EA
C
D
Stand Guide Stand Screws
1 2
3
✎Place a soft cloth over the
then place the TV on the
cloth screen-side down.
✎Insert the Stand Guide into
the TV.
✎
end line in the direction of
arrow.
D
C
6
English
✎
the manual’s order.
4 5
C
!
!
✎NOTE
–
–Make sure that at least two persons lift and move the TV.
7
English
Using the TV's Controller
✎The color and shape of the TV Controller may vary depending on the model.
✎
the remote control.
Press: Move
Press & Hold: Select
The TV controller
TV controller / Remote control sensor
: Power off
: Channel Up
: Channel Down
: Volume Up
: Volume Down
: Source
Control Menu
Standby mode
8
English
The Connection Panel
4
2
3
1
6
5
7
✎
✎
1
USB (5V 0.5A), USB (HDD 1.0A) / CLONING
–Connector for software upgrades and Media Play, etc.
–Service connection.
2
DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component.
3
HDMI IN 1 (ARC), 2 (DVI)
Connects to the HDMI jack of a device with an HDMI output.
✎
and video.
✎Use the HDMI IN 2 (DVI)
adapter (DVI to HDMI) for the video connection and the PC/DVI AUDIO IN jacks for audio. Some DVI or HDMI
devices may not or should not need a DVI AUDIO IN connection for audio.
✎
contact to the Samsung customer care center. Refer to page 52 for the information of the Samsung customer
care center.
✎
4
DATA
–
–Connects using RJ-12 TV type plugs.
5
LAN
9
English
6
COMPONENT / AV IN 1
–Use to connect to Component video / audio devices such as DVD players and AV (Composite) devices such as
VCRs.
–
Component devices.
–The COMPONENT jack is also used as the VIDEO jack.
–
and the other ends to corresponding component video out jacks on a DVD player. Match the colors on the jacks
–
–
–
–AV IN 1 [Y/VIDEO]
AV IN 1 [Y/VIDEO] jack (Green/Yellow) .
7
ANT IN
–To view television channels correctly, the TV must receive a signal from one of the following sources:
–
10
English
The Remote Control
✎
impaired customers.
Turns the TV on and off.
sources.
Return to the previous channel.
Change channels.
Displays My Contents, Watch TV and
Source icons on the TV screen.
Press to display channel and TV
information on the TV screen.
SLEEP: Sets the Sleep Timer.
X
CC: Controls the caption decoder.
Cut off the sound temporarily.
Press to directly access channels.
Adjust the volume.
Display the channel list on the screen.
Display the main on-screen menu.
Switch to the HOME Screen.
Quickly select frequently used functions.
Return to the previous menu.
Media Play and
Anynet+ modes.
Select on-screen menu items and change
menu values.
Press to select additional digital
Buttons used in Channel list, Media Play
menu, etc.
TV to turn on.
11
English
Installing batteries (Battery size: AAA)
✎NOTE
–
–Bright light may affect the performance of the remote control. Avoid using near fluorescent lights or neon signs.
–The color and shape of the remote may vary depending on the model.
12
English
Using the Samsung Smart Control
Buttons and Functions
SEARCH
PVOICE
RETURN
EXIT
GUIDE
CH.LIST
SMART HUB
KEYPAD
TV
SOURCE
MIC
MENUTTXREC
M.SCREEN
¢: Cuts off the sound
temporarily.
RETURN
EXIT
GUIDE
CH.LIST
SMART HUB
KEYPAD SOURCE
VOL CH
VOICE
CC ALARM
3D SLEEP
MENU HOME
SEARCH
MIC
TV
MIC: Use the microphone with the Voice Control and Voice functions.
–The Voice Control
pronunciation, voice level, or surrounding noise.
Turns the TV on and off.
SEARCH
KEYPAD: Displays the On-Screen Remote.
SOURCE: Displays and lets you select video sources.
VOICE
voice.
Changes channels.
Adjusts the volume.
Touch pad
The pointer on the screen moves in the direction you moved the
Samsung Smart Control.
Press the touch pad to run the focused item.
< > ¡ £: Moves the cursor, selects the on-screen menu items, and
changes the values seen on the TV's menu.
RETURN: Returns to the previous menu.
SMART HUB: Brings up Smart Hub applications.
–™
GUIDE: Displays the EPG (Electronic Program Guide).
directions on the TV's screen.
3D
SLEEP
CC: Controls the caption decoder and displays captions on the screen.
ALARM
MENU: Displays the menu on the screen.
HOME: Press to display the HOME menu or the REACH menu or the SINC menu.
13
English
Installing Batteries into the Samsung Smart Control
Using the Samsung Smart Control Motion Function to Operate the TV
Smart Control and using it much like a cordless mouse.
on the screen. Move the Samsung Smart Control, and pointer moves on the screen in the direction you moved the
Samsung Smart Control and the same distance. Highlight an item on the screen with the pointer, and then press the touch
pad to select it.
–If you stop using the Motion Function, even momentarily, put your finger on the touch pad, and then move the
Samsung Smart Control to re-start the function.
14
English
Using the Touch Pad and the Directional Buttons
–In the TV's menu, navigate to Support > Smart Control Tutorial to view a tutorial that shows how to use the touch
pad.
–If the touch pad's sensitivity is too high or low, navigate to the System > Smart Control Settings menu, and then
select the Touch Sensitivity option to change the touch pad sensitivity.
Moving the Focus or Pointer
or cursor in the direction you want.
Entering the Menu / Selecting an Item
To enter a menu or select an item, highlight the item or the menu title, or move the
pointer over it, and then press the touch pad.
Displaying a Context-sensitive Menus in Smart Hub
–
Changing the Smart Hub Panel
Scrolling on the Web Browser
15
English
Reconnecting the Samsung Smart Control to the TV
pair the Samsung Smart Control and TV again.
1. Move to within a foot of the TV, and then aim the Samsung Smart Control at the TV's remote control receiver.
Remote Control Sensor
2. Press the RETURNGUIDE
3. The connection icon appears on the screen. A few moments later, the connected icon appears. The Samsung Smart
Control is paired to the TV.
The Low Battery Alarm Window
16
English
Displaying and Using the On-Screen Remote
Press the KEYPAD
the touch pad on the Samsung Smart Control to select.
–
Button Description
Pre-CH to return to
the previous channel.
a, b, {, }
TOOLS
Press to display the Tools menu while you are watching TV. The Tools menu gives you easy
depending on how you are currently using the TV.
INFO
MENU Displays the TV's menu on the screen.
3D
PIP
CC
P.Size Changes the picture size.
SLEEP This function automatically shuts off the TV after a preset period of time.
P.Mode Lets you select the Picture Mode.
Web Browser
ALARM
Move To The Right / Move To The Left: Moves the Onscreen Remote on the screen.
Large Size / Normal Size: Resizes the Onscreen Remote on the screen. Alternatively,
navigate to the System > Smart Control Settings menu and select and set the Onscreen
Remote Size option.
Touch Sensitivity: Lets you change the touch pad sensitivity.
Alternatively, navigate to the System > Smart Control Settings menu and select and set the
Touch Sensitivity option.
Cancel: Select to close a pop up menu.
17
English
Connecting to the Network
You can set up your TV so that it can access the SMART TV applications through your local area network (LAN) using a
wired or wireless connection.
✎After you have “physically” connected your TV to your network, you must configure the network connection to
complete the process. You can configure the connection after the Initial Setup process, through the TV’s menu.
Network Connection - Wireless
Connect the TV to the Internet using a standard wireless router or modem.
that has a DHCP Server
Network Connection - Wireless
y
Otherwise, when you play video over a network connection, the video may not play smoothly.
y
DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.
ySelect a channel that is not currently in use for the wireless router. If the channel set for the wireless router is currently
y
must enter this security key into any other devices you want to connect to the wireless network.
Network Security Protocols
The TV only supports the following wireless network security protocols:
y
y
encryption in networks running in the 802.11n mode.
settings.
18
English
Network Connection - Wired
TV Side Panel
(Not Supplied)
(Not Supplied)
(Not Supplied)
TV Side Panel
IP Router that has a
DHCP Server
TV Side Panel
✎
✎
19
English
Connecting the TV to an SBB or STB
ETH MODEM
TV Rear Panel
1. Connect the DATA jack of the TV to the ETH MODEM
✎
20
English
List of Hospitality SI Vendors and Compatible Data Cables Supplied with the TV
y
y
SI Vendor Pin assign Remark
Samsung
OCC
Enseo
Guest-Tek
Provided
nStreams
Provided
✎
21
English
Setting the Hotel Option Data
To let you control how the TV functions when in Hotel mode, the TV has two Hotel mode menus, the Stand-alone mode
Menu items in the Stand-alone mode only:
–SI Vendor : Smoovie
–
Menu items in the Interactive mode only:
–SI Vendor: Samsung and other vendors.
To access the menus, press MUTE119ENTERE on your Samsung remote.
After a menu appears, follow these general directions to navigate and change values:
–
–Press the ENTERE
only.
–
–
previous menu item.
–Press the RETURN or MENU
menu.
–
Hospitality Mode Standalone Security Mode
SI Vendor OFF DRM
Power On System
Channel
Menu OSD
Clock
Music Mode
External Source
Eco Solution
Logo/Message
Cloning
REACH Solution
Network
Widget Solution
Virtual Standby
1. Highlight the Hospitality Mode menu item in the top left corner of the menu.
2.
3.
Interactive to Standalone.
4.
✎After you have set the values in one TV, you can clone those values to multiple TVs. See USB Cloning on page 29.
22
English
Menu Items
To Enter this menu: Press the MUTE119ENTERE
changes you made are saved.
Hotel TV Function Description
Category Item
Hospitality
Mode Hospitality Mode
Select Hospitality mode.
yInteractive mode: TV works with an SI STB or SBB.
yStandalone mode : TV works alone, without an SI STB or SBB.
SI Vendor SI Vendor
yInteractive mode: Samsung / OCC / MTI / Nstreams / Enseo / Cardinal / Guestek /
SeaChange / MDC / Innvue
yStandalone mode: OFF / Smoovie / SSCP
Power On
Power On Channel
y
yLast Saved: If you select this item, when the TV is turned on, it displays the channel it was
displaying when it was turned off.
Power On Channel Num
Power On Channel Type
y
Power On Volume
y
y
Power On Volume Num The TV turns on with this Volume Level in Stand Alone Hospitality mode.
Min Volume The minimum Volume Level the user can set in Stand Alone Hospitality mode.
Power On Source Select the input source the TV displays when turns on.
Power On Option
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
y
was on, it turns on.
y
y
Channel
Channel Setup Gives you direct, immediate access to some of the Channel menu functions on the user
Channel menu such as Auto Program, Antenna selection, etc.
Channel Editor
The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel
Editor you can:
y
y
channel and outputs only the sound while displaying a speaker icon on the screen.
having to display each channel directly.
at the same time.
y
y
type [AIR/CABLE or Satellite] only. The Channel list/Editor will only show the selected
antenna type
channels.
Dynamic SI
y
y
Mychannel
Genre Editor
23
English
Hotel TV Function Description
Category Item
Menu OSD
Picture Menu Lock
Menu Display
yON: The Main Menu is displayed.
yOFF: The Main Menu is not displayed.
Tools Display
yON: The Tools Menu is displayed.
yOFF: The Tools Menu is not displayed.
Channel Menu Display
yOFF:The Home Menu is not displayed.
yON:The Home Menu is displayed.
Panel Button Lock
Turning the front panel (local key) operations on/off.
yUnlock: Unlocks panel key.
yLock: Locks panel key.
y
Home Menu Display
yOFF:The Home Menu is not displayed.
yON:The Home Menu is displayed.
Home Menu Editor Edit Home Menu .
Home Menu Auto Start
yON:The Home Menu is Auto Start.
yOFF:The Home Menu is not Auto Start.
BT Auto Remove Device List
yDelete Device List in when power on or off.
yON: Connection history is removed in BT Music Player.
y
Clock
Clock Type
y
y
of TV and then TV is turned off automatically.
Local Time
Select the way to update the clock data
y
the TV is in stand-alone mode.
yTime Channel: The clock is set from the selected channel.
Timer Type
y
y
Music Mode
Music Mode AV
signal or not. Also mutes the video so the TV does not display a picture when a guest is
Music Mode Comp
video signal or not. Also mutes the video so the TV does not display a picture when a guest
Music Mode Backlight
mode. To save energy, set to Off.
Source
USB Pop-up Screen
yDefault: a popup window appears.
yAutomatic: This enters the USB content menu automatically.
y
y
y
Auto Source
y
source, and then automatically switches to that input source.
yOFF: Auto Source function is Off.
Anynet+ Return Source Select the return TV source after stopping an Anynet+(HDMI-CEC) connection. (This fuction
is especially useful for the Guestlink RJP.)
Eco Solution Energy Saving
yOFF: Turns off the energy saving function.
yLow: Sets the TV to low energy saving mode.
yMedium: Sets the TV to medium energy saving mode.
yHigh: Sets the TV to high energy saving mode.
24
English
Hotel TV Function Description
Category Item
Logo/Message
Hospitality Logo
Turns the Hospitality logo feature OFF, BMP, AVI, BOTH. If not OFF, when the TV is turned on, the
Display Time”.
Hospitality Logo DL
Downloads the Hospitality logo.
y
y
y
Logo Display Time
Cloning
Clone TV to USB Clone the current TV options to a USB memory device.
Clone USB to TV Clone the saved TV options on a USB memory device to the TV.
Setting Auto Initialize If you set Setting Auto Initialize to On, and the TV's power is turned off and on, TV menu
REACH
Solution
REACH
y
y
REACH IP Mode
Server IP Setting
REACH Channel
REACH Update Time
downloaded from the REACH server to the TV :
y1hour: Every hour
y2hour: Every 2 hours
y
y
y
y
REACH Update Immediate
y
off), the REACH data is updated on the TV.
yOFF: The REACH data is only updated on the TV at the REACH server update time.
Group ID
Select the group ID of the REACH server. (Refer to the REACH server manual for more details)
IPG Room Type Selects the IPG room type of the REACH server. (Refer to the REACH server manual for the
more information.)
The version of REACH is displayed.
Network
Network Setup
If this item is entered into, network setup menu is displayed. The network setup menu is
used for setting network like access internet.
y
ySecurity key: Set a security key that you need to enter on other devices so they can
connect to the TV.
–Input the generated security key into the device you want to connect.
–If network does not operate normally,check the security key again. An incorrect
security key may cause a malfunction.
✎
✎
✎
✎
vary depending on your wired/wireless network environment.
Service Discovery
View App) User search and add TV in the DLNA environment.
25
English
Hotel TV Function Description
Category Item
Solution
y
of TV
y
Solution Type
Select the type of the solution server installed in your site for the widget service.
yVendor Server: In the case of that the special SI vendor of the server is installed in your
site.
ySINC Server: In the case of that the Samsung SINC server is installed in your site.
Server URL Setting
License Server IP Setting
IPTV Mode
y
y
Room Num Setting
PHY Sleep Mode
y
y
Virtual
y
y
ithe size of the TV screen).
Security Mode
Factory Lock
Delete Device List in when power on or off.
y
y
Password Input
preferences. After the correct password is entered, options such as Password Setting,
Password Setting User can change the password.
Password Reset
Password Popup
password input popup window when entering the Factory menu. If set to ON, the password
input popup window appears.
Security Mode
USB
HDMI
DRM
DRM Mode
OFF: Turns off DRM support.
LYNK DRM: Select to turn on S-LYNK DRM CAS support only.
Pro:idiom: Select to turn on Pro:Idim CAS support only.
LYNK DRM,PI: Select to have the TV support S-LYNK DRM CAS and Pro:Idiom CAS.
PI AES Data Displays the current state of Pro:Idion AES
PI AES Log
y
y
View PI AES Log If this item is entered into, the Pro:Idiom AES log is displayed.
26
English
Hotel TV Function Description
Category Item
System
Self Diagnosis
for TV
yEnter Self Diagnosis Menu.
select Yes and follow the directions on the screen.
y
occurs during the test, select Yes and follow the directions on the screen.
Self Diagnosis for HTV
Lets you check the state of Pro:Idiom and its communication with the SI STB or SBB. If you
SI STB or SBB, use this diagnosis function. If Pro:Idiom DTV Channel Key Loss appears to
Service Pattern
Sound Bar Out
If the Samsung Sound Bar device is connected to this TV, this item lets you to select where
the TV sound is outputted when the TV is turned on.
y
device only.
y
device only.
Contact Samsung
address information.
yON: The LED is on.
yOFF: The LED is off.
TV Reset Returns all settings on the TV to their factory defaults.
✎REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, REACH contents, and TICKER contents
standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the
REACH server product for more operating information.
27
English
Welcome Message
–
–
Welcome Message OFF
Edit Welcome Message
Hospitality Logo OFF
Hospitality Logo DL ...
Logo Display Time ...
–
–
✎Capital Letters from A to Z.
–Edit
Welcome Message
Move Enter Return
a
b
{
}
Move to Left
Move to Right
Leave Black
Done
A B C D E F G
H I J K L M N
O P Q R S T U
V W X Y Z
W E L C O M E T O O U
R H O T E L _
Edit Welcome Message
–Press the a
–Press the b
–
–Press Enter to place a letter into the position you selected.
–Press the {
–Press Return or the }
28
English
Hotel Logo
The Hospitality Logo function displays the Hotel's picture image when the TV is powered on.
–Hospitality Logo settings are the Hotel mode menus.
–
–If there is a logo image stored in memory and the Hospitality Logo option is on, the Hospitality logo is displayed
when the TV is turned on.
–The Hospitality logo is not displayed when the Hospitality found Logo option is off, even if the logo image has
Hospitality Mode Standalone Security Mode
SI Vendor OFF DRM
Power On System
Channel
MyChannel
Menu OSD
Clock
Music Mode
External Source
Eco Solution
Logo/Message
Cloning
REACH Solution
Network
Widget Solution
Virtual Standby
r
Welcome Message OFF
Edit Welcome Message
Hospitality Logo OFF
Hospitality Logo DL ...
Logo Display Time ...
yHospitality Logo
–This option lets you choose whether the Hospitality Logo image is displayed or not.
–Initial value is OFF.
–
–
yLogo Download
–This option lets you download the logo image to the TV’s memory from a USB device.
–
–
–
–No USB appears if no USB device is connected.
–No File
AVI file). If No File appears and there is a logo file on the USB device, check the file format.
yLogo File Format
–The TV supports only BMP and AVI format.
–
–
–
–The TV does not change the size or scale of the image.
29
English
USB Cloning
Picture, Sound, Input, Channel, Setup, and Hotel
Setup) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you
✎After cloning, certain features are applied when the TV is turned on again.
yCloning TV to USB: Copies stored menu settings from a TV to a USB device.
1. Insert a USB drive into the USB port on the rear of the TV.
2.
MUTE119ENTERE
3. Cl one:TV to USB, and press the
ENTERE
4. Clone: TV to USB is displayed. Press the ENTERE
5. The TV displays one of the following messages:
yIn Progress: Copying data to USB.
yCompleted: Copy was successful.
yFailed: Copy was not successful.
yNo USB: USB is not connected.
✎The cloned values include the values on the Guest side menu
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
Cloning USB to TV: Copies menu settings in a USB device to a TV.
✎Shortcut: Turn the TV off, insert the USB device, turn the TV on, and then press the ENTERE
To clone data to the TV using the Hotel menu, follow these steps:
1. Turn the TV off.
2. Insert the USB drive into the USB port on the rear of the TV.
3. Turn the TV on.
4.
MUTE119ENTERE
5.
ENTERE
6. The message Clone: USB to TV is displayed. Press the ENTERE
7. The TV displays one of the following messages:
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
yIn Progress: Copying data to TV.
yCompleted: Copy was successful.
yFailed: Copy was not successful.
yNo USB: USB is not connected
yNo File
✎
page.
30
English
Settings Cloned in the Hotel Menu
Menu Item Cloning Support
Hospitality Mode Yes
SI Vendor Yes
Power On Channel Yes
Power On Channel Num Yes
Power On Channel Type Yes
Power On Volume Yes
Power On Volume Num Yes
Min Volume Yes
Max Volume Yes
Power On Source Yes
Power On Option Yes
Channel Setup N/A
Channel Editor N/A
Channel Bank Editor N/A
Channel Bank Service Level Yes
Mixed Channel Map Yes
Dynamic SI Yes
Channel Rescan Message Yes
Pan Euro MHEG Yes
Channel Auto Store N/A
Mychannel Yes
Genre Editor N/A
Mute On CC Yes
Subtitle Auto On Yes
TTX Widescreen Mode Yes
Picture Menu Lock Yes
Menu Display Yes
Tools Display Yes
Channel Menu Display Yes
Panel Button Lock Yes
Home Menu Display Yes
Home Menu Editor N/A
Home Menu Auto Start Yes
Gallery Mode Editor N/A
Bluetooth Music Player Yes
Clock Type Yes
Local Time Yes
Time Format Yes
Clock Test N/A
Clock Normal Dim. Yes
Clock Standby Dim. Yes
Timer Type Yes
Time Channel Type Yes
Time Channel Num Yes
Music Mode AV Yes
31
English
Menu Item Cloning Support
Music Mode PC Yes
Music Mode Comp. Yes
Music Mode Backlight Yes
HDMI Music Mode Yes
Video Out Yes
USB Pop-up Screen Yes
External Source Banner Yes
Auto source Yes
Anynet+Return Source Yes
HP Mode Yes
Default HP Volume Yes
Main Speaker Yes
Pillow Speaker Type Yes
Speaker Select Yes
Pillow Volume Yes
Energy saving Yes
Energey Saving Timer Yes
Welcome Message Yes
Edit Welcome Message N/A
Hospitality Logo Yes
Hospitality Logo DL N/A
Logo Display Time Yes
Clone TV to USB N/A
Clone USB to TV N/A
Setting Auto Initialize Yes
REACH 3.0 Yes
REACH 2.0 Yes
REACH Channel Yes
Group ID N/A
IPG Room Type Yes
Ticker Yes
REACH Update Time Yes
REACH Update Immediate Yes
Room Number N/A
REACH 2.0 TV Sound Yes
REACH Server Version N/A
Network Setup N/A
SmartHub Model Setting N/A
SmartHub Setting N/A
Service Discovery Yes
VLAN ID Yes
Solution VLAN ID N/A
Device VLAN ID N/A
32
English
Menu Item Cloning Support
Widget Mode Yes
Solution Type Yes
Server URL Setting N/A
License Server IP Setting N/A
IPTV Mode Yes
Virtual Standby Yes
Instant On Yes
Room Num Setting N/A
Widget Resolution Yes
PHY Sleep Mode Yes
MDC ID Settings Yes
TV Version Yes
Door Eye Mode Yes
Door Eye Source Yes
Prompt OSD Yes
Source Return Time Yes
Password Input N/A
Password Setting N/A
Password Reset N/A
Security Mode Yes
USB Yes
HDMI Yes
TTX Security Yes
DRM Mode Yes
PI AES Data N/A
PI AES Log Yes
View PI AES Log N/A
Self Diagnosis for TV Yes
Self Diagnosis for HTV
PI DTV Channel Key Loss N/A
STB SI Vendor Setting N/A
Bathroom AMP N/A
RTC N/A
SW Update N/A
Service Pattern Yes
ATV Cable AGC Gain Yes
DTV Open Cable AGC Gain Yes
Sound Bar Out Yes
Contact Samsung N/A
Standby LED Yes
TV reset N/A
33
English
Multi Code Remocon
A Multi Code Remocon is a special remote which is designed to control multiple TVs.
This function is useful where there is more than one TV in a location.
displayed on each TV's OSD.
The Initial ID code for each TV is “0”.
–
–You can set the ID code to any digit from 0 to 9.
–To set a TV's ID code, follow these steps:
1. Aim the remote at the TV, and then press the MUTERETURN
2.
✎The TV will display the OSD until you press the EXIT
Remote control code is set to 0. If you want to
change Remote control code, enter the digit you
want to change.
displays the following message: “Remote control code is changed to 1”
–To reset the ID code, press the MUTEEXIT
0.” appears on the TV
34
English
Setting Auto Initialize
Picture, Sound, Input, Channel, Setup, and Hotel Setup. This lets you set nearly all of the menu values on your hospitality
they can change the settings in those menus so they are no longer standard. If you set the Setting Auto Initialize function
to on the TV automatically restores (initializes) any guest-side menu values to the cloned, standard values when the TV
is turned off and then turned on again. Note that Setting Auto Initialize works on cloned guest side menu values only.
to On.
Menu Menu Item
Picture
Picture Mode
Back light
Contrast
Brightness
Sharpness
Color
Tint (G/R)
Apply Picture Mode
Picture Size
Picture Size
Position
PIP
Advanced Settings
Dynamic Contrast
Black Tone
Flesh Tone
RGB Only Mode
Color Space
Gamma
Motion Lighting
Picture Options
Color Tone
Digital Clean View
MPEG Noise Filter
HDMI Black Level
Film Mode
Analog Clean View
LED Clear Motion
Picture Off
Reset Picture
Sound
Sound Mode
Sound Effect
DTS TruSurround HD
DTS TruDialog
Equalizer
Speaker Settings
Additional Settings
HDMI Audio Format
Reset Sound
Menu Menu Item
System
Voice Guide
Video Desciption
Caption
Menu Transparency
High Contrast
Enlarge
Menu Language
Smart Control Settings
Motion Sensitivity
Touch Sensitivity
Onscreen Remote Size
Voice Control
Language
TV Voice
Voice Gender
Device Manager
Mouse Settings
Time
Clock
Sleep Timer
Eco Solution
Energy Saving
Eco Sensor
No Signal Power Off
Auto Power Off
Smart Security
Auto Protection Time
Change PIN
General
Game Mode
Boot Logo
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
Auto Turn Off
Device search
35
English
Hotel Plug & Play
The Hotel Plug & Play function, which automatically performs the Hotel mode selection, Country Setup, Clock Setup, and
Service Reset.
yUI Scenario
E + P
E
E
E
E
E
E E
E
E
E
E
Copy the system settings from the USB or server
to the TV.
The TV is automatically
turned off and on.
If you select
Cloning Mode
If you don't change the country
of the Current Location
End setup and go to Factory
Menu directly.
After Searching
channels.
Select Clock Mode, DST, and your
Time Zone
Select your language Select Picture mode
If you select Factory Reset, the TV resets all values to their
factory defaults and then displays the Hospital Plug & Play
If you change the
country of the
Current Location
If you select
Factory Menu
If you select
TV Basic
Setup
E
to use for Auto Program
Hotel Option Menu
appears.
Self Diagnosis for TV
Self Diagnosis for HTV
SW Update
Service Pattern OFF
ATV Cable AGC Gain Default
DTV OpenCable AGC Gain Default
Sound Bar Out OFF
Contact Samsung
Standby LED ON
TV Reset
Your TV is now ready to use.
Setup Complete!
Done
Auto Program is finding channels for you...
Auto Program
40%
DTV Air 4
DTV Air
Air
DTV Cable
Cable
05
36
English
yLocalSet
–Initially highlighted: US
–If you press the Enter key after selecting Change, you can change the country.
–If the country is changed, the TV automatically turns off and on.
–
yMenu Language OSD
–
–Initially highlighted: English
–If you press the Enter key, the “Picture Mode” OSD appears
yPicture Mode OSD
– Initially highlighted: Standard.
– The TV displays the Picture Mode OSD where you can choose the Dynamic or a Standard Picture mode.
yAuto Program OSD
– If you press the Enter key, the TV automatically searches for channels.
ySet Clock Mode, DST(Daylight saving time), and Time Zone OSD
–Initially highlighted:
Clock Mode : Auto, DST : Off, Time Zone : Eastern
–
the Clock Mode to Auto. The TV will set the date and time automatically.
–
and time on the TV manually.
–Set DST On or Off to apply or not apply daylight saving time to the TV.
–Select your time zone on the map that appears.
37
English
USB Software Upgrade Method
the USB drive containing the upgrade to the USB port located on the TV.
recommend you clone the hospital settings so that you can easily reset them after the upgrade.
To upgrade the TV's software, follow these steps:
1. USB port on the side of the
TV.
2. Press the MENU
Support, and then press the ENTERE
3. SW Upgrade, and then press the ENTERE
The message "Scanning for USB. This may take more than 1min." is displayed.
4. The message "Upgrade version XXXX to version XXXX? The system will be reset
after upgrade." is displayed.
Press the ◄ or ► to select OK, and then press the ENTERE
complete.
Soundbar(AirTrack)
ySamsung Soundbar(AirTrack) and Hospitality TVs in 2016
–
–
outputted when the TV is turned on.
TV is turned on.
–
y
ySetting the Soundbar(AirTrack) to Hotel Mode.
1. Set the following Hotel menu options:
–
–
–Hotel option > Power On > Power On Volume Num > Set greater than 0.
–
2.
(supporting ARC) on the hospitality TV.
3.
automatically detects the TV, and then automatically switches to Hotel Mode.
38
English
Soundbar(AirTrack) Hotel mode functional characteristics:
yPower On/Off is synchronized with the TV
yHDMI_CEC defaults set to On
yFunctions through the “HDMI OUT” port only
y
y
Channel Bank Editor (Smoovie TV Only)
The Channel Bank Editor in conjunction with the SMOOVIE remote lets you control the channels guests have access to.
channels a guest can access depend on the Bank Card installed in their SMOOVIE remote.
Setting the Channel Bank Editor under Stand-alone Mode
1. Press MUTE119ENTERE on the remote to enter the Hotel Standalone menu.
2. Go to SI vendor, and then select : “Smoovie”
3. ChannelChannel Bank Editor
4. Enter the “Channel Bank Editor”.
Hospitality Mode
Standalone
Widget Solution
SI Vendor
OFF DRM
d
SI Vendor
Smoovie
d
SI Vendor
Smoovie
d
SI Vendor
Smoovie
39
English
5.
a.
b.
c.
Channel Bank Editor
Move Select/Deselect Return
All
1 ABC
2 CBS
3 FOX
4 NBC
5 CNN
6 CW
7 HBO
8 TNT
Bank1 (4) Bank2 (6)Bank3 (36)
Information About SMOOVIE Remote Controls
yIf you select SMOOVIE as the SI vendor, you should also use SMOOVIE remotes in your facility.
yGuests with remotes that do not have a card can only view channels from Bank 1.
yGuests using the Numeric keys on the remote to change channels can only view channels from Bank 1.
yGuests with remotes that have Green or Red cards must use the channel up/down keys to change channels.
yGuests can only see channels from the Bank1 channel list In the Channel Guide or the Channel List.
Smoovie Set Up Sequence
Step
If the TV starts with Hotel Plug&Play If Hotel Plug&Play already done
1 Enter the Hotel menu
2 After P&P, the TV displays the Hotel menu
Select the channel type
- ATV or ADTV for Air
Select the channel type
- ATV or ADTV for Air
Select Smoovie TV in the Hotel menu
Select Smoovie TV in the Hotel menu Select Channel Setup
5Select Channel Setup
6 Set up channels in the CH Bank Editor
7 Set up channels in the CH Bank Editor After power off & on, guests can use the TV
8 After power off & on, guests can use the TV
9
10
40
English
Channel Editor
The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel Editor you can:
–
–
the sound while displaying a speaker icon on the screen.
channel directly.
Hospitality Mode
Standalone
Security Mode
SI Vendor
OFF DRM
Power On
System
Channel
MyChannel
Menu OSD
Clock
Music Mode
External Source
Eco Solution
Logo/Message
Cloning
REACH Solution
Network
Widget Solution
Virtual Standby
r
Channel Editor
General Steps for Using the Channel Editor in Stand-alone Mode
Step Broad Outline
1 Run ‘Channel Auto Store’ in the Hotel Option Menu.
2 Enter ‘Channel Editor’ in the Hotel Option Menu.
On a piece of paper, compile a list of channels you want to have, arranged in the order you want.
Rearrange channels and edit channel names with the TOOLS
5Press the EXIT or RETURN
41
English
Channel Editor screen.
Channel
a
Delete
b
Select All
}
Video Mute On
`
Information
U
Page
E
Select
T
Tools
R
Return
a
2----- (Cable)
a
10 CW
a
3----- (Cable) Air
10-1 CW DTV
a
4----- (Cable)
a
11 HBO
a
5----- (Cable) Air
11-1 HBO DTV
a
6----- (Cable)
a
12 NBC
a
7ABC Air
12-1 NBC DTV
Air
7-1 ABC
a
13 ----- (Cable)
a
8FOX
a
14 CNN
Air
8-1 FOX DTV Air 15 ----- (Cable)
a
9----- (Cable)
a
16 TNT
All
ya Indicates an analog channel.
yChannels without an a are digital channels.
✎If Dynamic SI in the Hospitality Option Menu is On, Channel Editor will display no digital channels. You must set
y
Editor functions.
1
Using the remote's up or down arrow key, highlight the channel that you want to edit.
– To edit more than one channel, move the highlight to a channel, and then press the ENTERE key. A check will
2
– To delete two or more channels simultaneously, select multiple channels in Step 1, and then press the red
3
4
– To apply the video mute to two or more channels simultaneously, select multiple channels in Step 1, and then
5
INFO
6
Press the TOOLS
Channel Editor Functions and Remote Button
a Red (Delete): Deletes a channel from the channel list.
b Green (Select All): Selects all channels at once.
{ Yellow (Deselect All): Deselects all channels at once.
} Blue (Video Mute On/Off): You can set the Video Mute On/Off.
U (Page
` (Information): Display details of the selected channel.
T (Tools): Displays the option menu.
R (Return
42
English
TOOLS
a
2----- (Cable)
a
10 CW
a
3----- (Cable) Air
10-1 CW DTV
a
4----- (Cable)
a
11 HBO
a
5----- (Cable) Air
11-1 HBO DTV
a
6----- (Cable)
a
12 NBC
a
7ABC Air
12-1 NBC DTV
Air
7-1 ABC
a
13 ----- (Cable)
a
8FOX
a
14 CNN
Air
8-1 FOX DTV Air 15 ----- (Cable)
a
9----- (Cable)
a
16 TNT
All
Channel
a
Delete
b
Select All
}
Video Mute On
`
Information
U
Page
E
Select
T
Tools
R
Return
TOOLS
Edit Channel Number
Rename Channel
Information
R
Return
yEdit Channel Number
Use Edit Channel Number
1. Select a channel on the Channel Edit screen.
2. Press the TOOLS
3. Select Edit Channel Number in the Tools menu.
4.
5. Select OK when done, and then press the ENTERE
✎
updated automatically.
Edit Channel Number
ABC HD_
U
Adjust
E
Space
R
Return
Ok
Cancel
4
yRename Channel
Use Rename Channel to change the name of a channel you select.
To change the name of a channel, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Press the TOOLS
3. Select Rename Channel in the Tools menu.
4.
5. Done
ENTERE
Rename Channel
Enter new name for CH 4 (Max Length = 24)
ABC HD_
a
Delete
{
Space
R
Return
Done Cancel
a b c d e f 1 2 3
g h i j k l 4 5 6
m n o p q r 7 8 9
s t u v w x y z 0
A/a Space ◄ ►
yInformation
1. Select a channel on the Channel Edit screen.
2. Press the TOOLS
3. Select Information in the Tools menu.
4. Select OK, and then press the ENTERE
screen.
Information
OK
43
English
HDMI2 and AV.
–
Edit Channel Number
–
opening the TV source menu.
Channel
b
Select All
U
Page
E
Select
T
Tools
R
Return
a
628 MLS Soccer
a
629 CNN NEWS
a
812 American Idol
a
840 90210
a
841 LOST
a
998 Euro Football
a
HDMI1
a
HDMI2
a
HDMI3
a
AV
All
Channel
a
Delete
b
Select All
U
Page
E
Select
T
Tools
R
Return
a
628 MLS Soccer
a
629 CNN NEWS
a
812 American Idol
a
840 90210
a
841 LOST
a
997 AV
a
Euro Football
a
HDMI1
a
HDMI2/DVI
a
HDMI3
All
997 to the AV source.
44
English
Installing the Wall Mount
Installing the wall mount kit
You can mount the TV on the wall using a wall mount kit (sold separately).
To install a wall-mount from another manufacturer, use the Holder-Ring.
✎The Product shape may differ depending on the model.
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on a wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a
to the product or injury to yourself or others if you select to install the TV on your own.
Securing the TV to the Wall
[
Caution
To Prevent the TV from Falling
✎TV Holder Kits are sold separately. To purchase a TV Holder Kit, contact Samsung Customer Care.
1.
wall.
✎
2.
3.
✎Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If
✎Install the TV close to the wall so that it does not fall.
✎
45
English
Wall Mount Kit Specications (VESA)
✎
severe personal injury.
✎NOTE
–
–
– Do not use screws that do not comply with the VESA standard screw specifications.
– Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
– For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on the wall mount specifications.
– Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to
–
used or the consumer fails to follow the product installation instructions.
– Do not mount the TV at more than a 15 degree tilt.
– Always have two people mount the TV onto a wall.
TV
TV
Wall mount
bracket
Wall mount
bracket
C
C
Wall mount Adapter
Wall mount Adapter
Product Family TV size in inches
VESA screw
hole specs
(A * B) in
millimeters
C (mm)
Standard Screw
(Length*
Pitch in mm)
Quantity
LED-TV
M8 55
65
electric shock.
46
English
Anti-theft Kensington Lock
method may differ from the illustration at right, depending on the
manufacturer. Refer to the manual provided with the Kensington Lock for
additional information on proper use.
✎Please find the “K” icon on the rear of the TV. A Kensington slot is
K” icon.
1
<Optional>
To lock the product, follow these steps:
1.
2.
3. Insert the locking device into the Kensington slot on the product
1
.
4. Lock the lock.
✎
✎
✎
47
English
Specications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10% to 80%, non-condensing
5% to 95%, non-condensing
Model Name HG55NE890U
Display Resolution
Stand Swivel (Left / Right) 0°
Screen Size
(Diagonal)
55” Class
Sound (Output)
Body
Model Name HG65NE890U
Display Resolution
Stand Swivel (Left / Right) 0°
Screen Size
(Diagonal)
65” Class
Sound (Output)
Body
✎
✎This device is a Class B digital apparatus.
✎
48
English
Supported Resolutions for UHD Input Signals
y
✎An HDMI connection with HDMI UHD Color set to Off
HDMI connection with HDMI UHD Color set to On
If HDMI UHD Color is set to Off
Frame rate (fps) RGB
O O O -
50 / 60 - - - O
If HDMI UHD Color is set to On
Frame rate (fps) RGB
O O O -
50 / 60 O O O O
Display Resolution
column. The TV will automatically adjust to the resolution you choose.
Mode Resolution Display
format
Horizontal frequency
(KHz)
Vertical frequency
(Hz)
Clock frequency
(MHz)
Polarity (horizontal /
vertical)
IBM 70 Hz 70.087 -/+
MAC
67 Hz
75 Hz
75 Hz
68.681
66.667
75.062
100.000
-/-
-/-
-/-
VESA DMT
60 Hz
72 Hz
75 Hz
60 Hz
72 Hz
75 Hz
60 Hz
70 Hz
75 Hz
75 Hz
60 Hz
60 Hz
60 Hz
75 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
67.500
79.976
60.000
65.290
67.500
72.809
75.000
72.188
75.000
70.069
75.029
75.000
60.000
59.810
60.020
75.025
59.790
59.887
60.000
60.000
59.885
25.175
50.000
65.000
75.000
78.750
108.000
108.000
85.500
106.500
108.000
- / -
- / -
- / -
+ / +
+ / +
+ / +
- / -
- / -
+ / +
+ / +
+ / +
- / +
+ / +
+ / +
+ / +
- / +
+ / +
- / +
+ / +
- / +
49
English
Mode Resolution Display
format
Horizontal frequency
(KHz)
Vertical frequency
(Hz)
Clock frequency
(MHz)
Polarity (horizontal /
vertical)
CEA-861
50 Hz
60 Hz
50 Hz
60 Hz
50 Hz
60 Hz
50 Hz
60 Hz
25 Hz
50 Hz
60 Hz
25 Hz
50 Hz
60 Hz
25 Hz
50 Hz
60 Hz
15.625
28.125
27.000
28.125
56.250
67.500
56.250
67.500
112.500
56.250
67.500
112.500
50.000
50.000
50.000
60.000
50.000
60.000
25.000
50.000
60.000
25.000
50.000
60.000
25.000
50.000
60.000
27.000
27.000
27.000
27.000
297.000
297.000
297.000
297.000
297.000
297.000
- / -
- / -
- / -
- / -
+ / +
+ / +
+ / +
+ / +
+ / +
+ / +
+ / +
+ / +
+ / +
+ / +
+ / +
+ / +
+ / +
+ / +
+ / +
+ / +
+ / +
+ / +
+ / +
HDMI
25 Hz
67.500
56.250
25.000
297.000
297.000
297.000
297.000
+ / +
+ / +
+ / +
+ / +
✎NOTE
–The interlaced mode is not supported.
–
–Separate and Composite modes are supported. SOG (Sync On Green) is not supported.
50
English
Dimensions
Front view / Side view
(Unit: inches)
◆HG49NE890U ◆HG55NE890U
25.1 2 7.9
2.2
28.2
2.2
26.9
◆HG65NE890U
2.1
51
English
Jack panel detail / Rear view
✎
Base Stand detail
◆HG49NE890U / HG55NE890U
(Unit: inches)
9.9
◆HG65NE890U
(Unit: inches)
✎NOTE
52
English
Important Warranty Information Regarding Television Format Viewing
✎See the warranty card for more information on warranty terms.
if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the
television viewing per week.
models that offer picture sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LED aging as a result of format selection and use, as
y
defects in material or workmanship, and only those encountered in normal use of the product.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
–
–
53
English
License
are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries.
ⓒ DTS, Inc. All Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the
of DTS, Inc. in the United States and/or other countries. ⓒ DTS, Inc. All Rights Reserved.
DivX Certied® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certied® and associated logos are trademarks of DivX, LLC and are used under
license.
This DivX Certied® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, rst register your device at vod.divx.com. Find your registration
code in the DivX VOD section of your device setup menu.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710;
8,656,183; 8,731,369; RE45,052.
registered trademarks of HDMI Licensing LLC in the United States and other countries.
Open Source License Notice
Open Source License Notice is written only English.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Samsung Hospitality Hotline
© 2016 Samsung Electronics America, Inc