Samsung HG50ND477SF User Manual
Displayed below is the user manual for HG50ND477SF by Samsung which is a product in the TVs category. This manual has pages.
Related Manuals
LED TV
Installation manual
Thank you for purchasing this Samsung product.
To receive more complete service, please
register your product at
www.samsung.com/register
Model Serial No.
450S
460S
470S/477S
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance. Product design and specifications may be changed without notice.
Introduction
This TV B2B (Business to Business) model is designed for hotels or the other hospitality businesses, supports a variety of
special functions, and lets you limit some user (guest) controls.
Operational Modes
This TV has two modes : Interactive and Stand-alone mode.
• Interactive mode : In this mode, the TV communicates with and is fully or partially controlled by a connected Set
Back Box (SBB) or Set Top Box (STB) provided by a hospitality SI (System Integration) vendor. When the TV is initially
plugged in, it sends a command that attempts to identify the SSB or STB connected to it. If the TV identifies the SBB
or STB and the SBB or STB identifies the TV, the TV gives full control to the SBB or STB.
• Stand-alone mode : In this mode, this TV works alone without an external SBB or the STB.
The TV has a Hotel (Hospitality) Menu that lets you easily set its various hospitality functions. Please see pages 20 to 25.
The Menu also lets you activate or de-activate some TV and hospitality functions so you can create your optimal hospitality
configuration.
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3
format images, stock or news bars etc) on the screen. Displaying still pictures continually can cause uneven screen wear,
which will affect image quality. To reduce the chance that this effect will occur, please follow the recommendations below:
• Avoid displaying the same TV channel for long periods.
• Always try to display a full screen image.
• Reduce brightness and contrast to help to prevent the occurrence of after-images.
• Frequently use all TV features designed to reduce image retention and screen burn-in. Refer to the proper user
manual section for details.
Ensuring Proper Ventilation
When you install the TV, maintain a distances of at least 4 inches between the TV and other object (walls, cabinet sides, etc.)
to ensure proper ventilation.
Failing to maintain proper ventilation may result in a fire or problems with the product caused by an increase in its internal
temperature.
✎When using a stand or wall-mount, use parts provided by Samsung Electronics only.
✎Using parts provided by another manufacturer may cause difficulties with the product or result in injury caused by the
product falling.
Installation with a stand Installation with a wall-mount
4 inches4 inches
4 inches
4 inches4 inches
4 inches
4 inches
Additional Information
✎The appearance of the TV and its accessories may differ from the illustrations in this manual, depending on the TV.
✎Be careful when the you touch the TV. Some parts can be hot.
3
Contents
ENGLISH
English
yIntroduction ................................................................................................................................................. 2
yOperational Modes ...................................................................................................................................... 2
yStill image warning ....................................................................................................................................... 2
yEnsuring Proper Ventilation .......................................................................................................................... 2
yAdditional Information .................................................................................................................................. 2
yAccessories ................................................................................................................................................. 4
yInstalling the LED TV Stand.......................................................................................................................... 5
yUsing the TV's Controller ............................................................................................................................. 6
yThe Connection Panel ................................................................................................................................. 7
yUsing the TV's remote Controller ............................................................................................................... 12
yConnecting the TV to the Lodgenet game controller or a STB of a SI vendor ............................................ 14
yConnecting the Audio Output to an Audio Amplifier ................................................................................... 16
yConnecting the RJP (Remote Jack Pack) .................................................................................................. 17
ySetting the Hotel Option Data .................................................................................................................... 19
yInstalling the Wall Mount ............................................................................................................................ 45
ySecuring the TV to the Wall ........................................................................................................................ 46
yAnti-theft Kensington Lock ........................................................................................................................ 47
ySpecifications ............................................................................................................................................ 48
yDimensions ................................................................................................................................................ 51
4
English
Accessories
✎Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
✎The items’ color and shape may vary, depending on the model.
✎The parts for the stand are listed under Stand Components on the following page.
List of Parts
Remote Control & Batteries (AAA x 2) Power Cord Safety Guide / Quick Setup Guide
(Not available in all locations)
Data Cable (depending on the model)
(BN39-00865B, BN39-01011E)
Wall mount Adapter
(Depending on the Model)
5
English
Installing the LED TV Stand
Components
When installing the stand, use the provided components and parts.
AB
X 4 (M4 X L12)
Stand Screws
1
4
2 3
(M4 X L12) (2EA) (M4 X L12) (2EA)
6
English
Using the TV's Controller
The TV’s Controller on the bottom right side of the TV, lets you control the TV without the remote control.
: Turns the TV on or off.
/ : Changes channels.
/ : Adjusts the volume.
: Switchs the available video sources.
Control Menu
Remote control sensor/TV Controller
✎If you press it first, the control menu appears. You can select the function by pressing and holding the TV’s controller.
✎The product color and shape may vary depending on the model.
✎With the TV’s Controller, you cannot perform other operations except for turning the TV on or off, changing the channel,
adjusting the volume, and switching the input source.
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe
and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on
vacation, for example). It is best to unplug the power cord.
7
English
The Connection Panel
HD450S
1
4
5
23
HDMI IN
2 (DVI)
HDMI IN
1 (STB)
AUDIO
OUT
ANT IN
6
8
English
HD460S
2 7
4
3
1
AUDIO
OUT EX-LINK
AV IN HDMI IN
5
ANT IN
HD470S / HD477S
8 7
3
2
4
3
1AUDIO
OUT EX-LINK
AV IN HDMI IN1
5
ANT IN
DATA
HDMI IN 3
(ARC)
HDMI IN 2
(DVI)
9
English
✎connect an external device to your TV, make sure that the TV and the device are turned off.
✎When connecting an external device, match the color of the connection terminal to the cable.
1 COMPONENT/AV IN
– Used to connect with DVD players, Blu-ray players, cable boxes, STB satellite receivers, VCRs.
✎For better picture quality, we recommend the Component connection over the A/V connection.
✎When you connect a Video cable to COMPONENT / AV IN, the color of the COMPONENT / AV IN [VIDEO] jack (green) will
not match the video cable (yellow).
2 AUDIO OUT
– Connects to the audio input jacks on an Amplifier/Home Theater.
3 HDMI IN
– Connects to the HDMI jack of a device with an HDMI output.
✎No separate sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio and video.
4 USB (5V 0.5A) / CLONING
– Connector for software upgrades and Media Play, etc.
– Service connection.
5 ANT IN
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system / A satellite receiver.
6 DC 19V
7 EX-LINK
– Connect this jack to the jack on the optional RJP (Remote Jack Pack). The RJP allows you to connect external devices
(Camcoders, PCs, DVD players, etc) easily.
8 DATA
– Used to support data communication between the TV and the external SBB or STB.
– Connects using an RJ-12 type of plug.
10
English
Display Modes
You can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the
resolution you choose.
After connecting a computer to the TV, set the screen resolution for the TV on the computer. The optimal resolution is 1920
x 1080 @ 60 Hz. If it is set to any other than in the table below, the TV may display nothing. Set the resolution properly,
referring to the user guide of the computer or its graphic card.
The resolutions in the table are recommended.
✎Optimal resolution is 1366 X 768 @ 60 Hz.
Display Mode Display Format Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM 720 x 400 70Hz 31.469 70.087 28.322 -/+
MAC 640 x 480 67Hz 35.000 66.667 30.240 -/-
832 x 624 75Hz 49.726 74.551 57.284 -/-
VESA
DMT
640 x 480 60Hz 31.469 59.940 25.175 -/-
640 x 480 72Hz 37.861 72.809 31.500 -/-
640 x 480 75Hz 37.500 75.000 31.500 -/-
800 x 600 60Hz 37.879 60.317 40.000 +/+
800 x 600 72Hz 48.077 72.188 50.000 +/+
800 x 600 75Hz 46.875 75.000 49.500 +/+
1024 x 768 60Hz 48.363 60.004 65.000 -/-
1024 x 768 70Hz 56.476 70.069 75.000 -/-
1024 x 768 75Hz 60.023 75.029 78.750 +/+
1280 x 720 60Hz 45.000 60.000 74.250 +/+
1366 x 768 60Hz 47.712 59.790 85.500 +/+
11
English
✎Optimal resolution is 1920 X 1080 @ 60 Hz.
Display Mode Display Format Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM 720 x 400 70Hz 31.469 70.087 28.322 -/+
MAC 640 x 480 67Hz 35.000 66.667 30.240 -/-
832 x 624 75Hz 49.726 74.551 57.284 -/-
VESA
DMT
1152 x 870 75Hz 68.681 75.062 100.000 -/-
640 x 480 60Hz 31.469 59.940 25.175 -/-
640 x 480 72Hz 37.861 72.809 31.500 -/-
640 x 480 75Hz 37.500 75.000 31.500 -/-
800 x 600 60Hz 37.879 60.317 40.000 +/+
800 x 600 72Hz 48.077 72.188 50.000 +/+
800 x 600 75Hz 46.875 75.000 49.500 +/+
1024 x 768 60Hz 48.363 60.004 65.000 -/-
1024 x 768 70Hz 56.476 70.069 75.000 -/-
1024 x 768 75Hz 60.023 75.029 78.750 +/+
1152 x 864 75Hz 67.500 75.000 108.000 +/+
1280 x 720 60Hz 45.000 60.000 74.250 +/+
1280 x 800 60Hz 49.702 59.810 83.500 -/+
1280 x 1024 60Hz 63.981 60.020 108.000 +/+
1280 x 1024 75Hz 79.976 75.025 135.000 +/+
1366 x 768 60Hz 47.712 59.790 85.500 +/+
1440 x 900 60Hz 55.935 59.887 106.500 -/+
1600 x 900RB 60Hz 60.000 60.000 108.000 +/+
1680 x 1050 60Hz 65.290 59.954 146.250 -/+
1920 x 1080 60Hz 67.500 60.000 148.500 +/+
✎When using an HDMI/DVI cable connection, you must use the HDMI IN (DVI) jack.
✎The interlace mode is not supported.
✎The set might operate abnormally if a non-standard video format is selected.
✎Separate and Composite modes are supported. SOG is not supported.
12
English
Using the TV's remote Controller
HOME
CONTENT
CH
LIST
ALARM
SLEEP CC
CHVOL
¢
Turns the TV on and off. Display and select the available video
sources.
Return to the previous channel.
Change channels.
View the Contents Home.
Exit the menu.
Press to display channel and TV
information on the TV screen.
SLEEP: Sets the Sleep Timer.
X: Turns the 3D image on or off.
(Not available)
CC: Controls the caption decoder.
Cut off the sound temporarily.
Press to access channels directly.
Adjust the volume.
Display the channel list on the screen.
Display the main on-screen menu.
HOME: Swich to the HOME Screen.
Quickly select frequently used functions.
Return to the previous menu.
Use these buttons in a specific feature.
Select on-screen menu items and
change menu values.
Press to select additional digital
channels being broadcast by the same
station. For example, to select channel
‘54-3’, press ‘54’, then press '-' and ‘3’.
Use these buttons according to the
directions on screen (to perform a
function, display a screen, etc.).
13
English
Installing the batteries (Battery size: AAA)
Rear of the Remote
✎After you have installed the batteries, use a screwdriver to screw in the screw that holds the battery cover closed.
Installing Batteries into the Remote (battery size: AAA)
Match the polarity of the batteries to the symbol in the batter compartment.
✎NOTE
• Use the remote control within 23~33 feet of the TV.
• Bright light may affect the performance of the remote control. Avoid using near fluorescent lights or neon signs.
• The color and shape of the remote may vary depending on the model.
14
English
Connecting the TV to the Lodgenet game controller or a STB of a SI vendor
HD470S/HD477S
TV Rear Panel
Data Cable
ETH MODEM
1. Connect the DATA jack of the TV to the ETH MODEM jack of the STB (SBB) with the Data cable.
✎The "ETH MODEM" jack name that you connect the Data Cable to may differ depending on the SBB or STB type.
15
English
¦List of SI Vendors and Compatible Data Cables Supplied with the TV
• Confirm you are using the correct data cable for your SI vendor. Refer to the code label on the data cables.
• Contact your nearest dealer or your SI Vendor to buy the data cable not included in the TV.
Confirm the code on the
Code Label
Note the labeled end. Note the labeled end.
SI Vendor Cable code Pin assign Remark
Samsung
OCC
Enseo
Guest-Tek
BN39-00865B
NXTV BN39-01011B
nStreams BN39-01110A
MTI BN39-01011C
16
English
Connecting the Audio Output to an Audio Amplifier
AUDIO OUT
AUDIO IN
TV Rear Panel
Audio
Amplifier
1 Stereo cable
1. Connect the AUDIO OUT port of the TV to the Audio In port of an audio amplifier with a stereo cable. (Stereo cable not
provide)
17
English
Connecting the RJP (Remote Jack Pack)
Connect the input jacks on the TV to the RJP. The RJP lets guests connect audio and video sources to the TV.
HD460S
AV IN HDMI IN ANT IN
AV IN
HDMI IN
ANT IN
USB HDMI S-VIDEO RCA AUDIO/PC
RS/232
AUDIO
OUT EX-LINK
AV IN HDMI IN
2 Video / Audio Cable
1 PC Audio cable
RJP Rear
4
3 HDMI Cable
TV Rear Panel
HD470S
AV IN HDMI IN ANT IN
DATA
AV IN
HDMI IN
ANT IN
D
ATA
USB HDMI S-VIDEO RCA AUDIO/PC
RS/232
AUDIO
OUT EX-LINK
AV IN HDMI IN 1
HDMI IN 3
(ARC)
HDMI IN 2
(DVI)
2 Video / Audio Cable
1 PC Audio cable
RJP Rear
4
3 HDMI Cable
TV Rear Panel
1. Connect the AUDIO OUT port of the TV to the PC/AUDIO port of the RJP.
2. Connect the AV IN VIDEO/L-AUDIO-R ports of the TV to the RCA port of the RJP.
3. Connect one of the HDMI IN ports of the TV to the HDMI port of the RJP.
4. Connect the EX-LINK port of the TV to the RS/232 port of the RJP.
✎This Samsung TV is compatible with the Tele Adapt TA-7610 RJP only.
18
English
• RJP (Remote Jack Pack): The RJP is a hardware module that has different Audio Video inputs (A/V, Audio, PC
and HDMI) and corresponding outputs. The corresponding outputs are connected from the RJP to the TV. The RJP
communicates with the TV via RS232. The RJP communicates with the TV by sending messages regarding Active/
Inactive sources.
– A group of hotel menu items let you assign numbered priorities to the jacks of the RJP. (See page 21). 1 is the highest
priority and 3 is the lowest. When a guest connects external sources to the RJP jacks, the TV will automatically
switch between sources based on the priority you have assigned them in the Menu. For example, lets say AV is set to
1 and HDMI to 2. If a guest has attached a device to the HDMI jack, and then plugs a device into the AV jack, the TV
automatically switches to the device plugged into the AV jack (the jack with the higher priority). Note that a guest can
also switch between devices manually by pushing a button on the RJP.
✎When you set up the RJP, connect the RJP to HDMI 1, 2, or 3 or AV.
• To reset the RJP to its factory default state, press the AV and HDMI buttons simultaneously for 10 seconds. When all
button LEDs blink 5 times, the RJP reset is complete.
• The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room.
The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will
restart. If the guest then touches another source button, the TV will change to the selected source and the corre-
sponding LED will be lit.
• After an RJP Reset or a TV Power OFF/ON, it takes approximately 10 seconds to establish communications between
the TV and the RJP.
• The following table shows the approximate time in seconds it takes to switch from the TV to an input source, based
on assigned or default priorities.
✎Scenario 1 : When no inputs are connected.
Source To Connect
AV 2 Sec
PC 0.7 Sec
HDMI 3.9 Sec
✎Scenario 2: When two or more inputs are connected to the RJP and one of the input sources is disconnected and then recon-
nected.
Source Disconnect To Connect Total
AV 4.5 Sec 2 Sec 6.5 Sec
PC 0.7 Sec 0.7 Sec 1.4 Sec
HDMI 3.9 Sec 3.9 Sec 7.8 Sec
✎An example: If the RJP has all its live sources (AV, PC, and HDMI) connected, AV has been assigned the highest priority, the
RJP is in HDMI mode, and a guest removes and reconnects the AV source, the minimum time required to switch to the AV
source is 6.5 seconds.
• To play audio devices (Ipods, MP3 devices, etc.) through the RJP, you must turn Music Mode AV in the menu on.
(See page 21)
• Music mode in the TA-7610 RJP is supported by the AV jack only. HDMI Music mode is available for the Guestlink
RJP only.
19
English
Setting the Hotel Option Data
To let you control how the TV functions when in Hotel mode, the TV has two Hotel mode menus, the Stand-alone mode
menu and the Interactive mode menu. The menu items that differ between the menus are listed below.
Menu items in the Stand-alone mode only:
– SI Vendor : OFF / Smoovie / SSCP
– REACH Server and its submenus.
Menu items in the Interactive mode only:
– SI Vendor: Samsung and other vendors.
All other items appear in both menus
To access the menus, press MUTE → 1 → 1 → 9 → ENTER E on your Samsung remote.
After a menu appears, follow these general directions to navigate and change values:
– Use the Up and Down arrow buttons on the Samsung remote to move from menu item to menu item.
– Press the ENTER or Left or Right arrow buttons to select a menu item. The screen displays that menu item only.
– Press the Left or Right arrow button to change a value. The Right arrow button increases numerical values. The Left
arrow button decreases numerical values.
– When the screen is displaying one menu item, you can press the Up or Down arrow button to display the next or
previous menu item.
– Press the RETURN or MENU button to exit the current menu item and go to a higher menu level or the Main menu.
– To exit a Hotel mode menu, turn off the TV, and then turn it on again. Any changes you made are saved except
changes to SI Vendor. For changes to SI Vendor, you must turn the TV off, wait until the Standby light glows steadily,
then unplug the TV, wait for the Standby light to go off, and then plug the TV in again.
Hospitality Mode Standalone System
SI Vendor OFF
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
Eco Solution
Logo/Message
Cloning
REACH Solution
Security
DRM
HD460S / HD470S / HD477S
Power On
Menu OSD
Music Mode
External Source
Eco Solution
Cloning
HD450S
<Depending on model and region, some menu items may not exist.>
To change menus, follow these steps:
1. Highlight the Hospitality Mode menu item in the top left corner of the menu.
2. Press the left or right arrow button on the Samsung remote. Only the Hospitality Mode menu item is displayed.
3. Press the left or right arrow button to change the Hospitality Mode item from Standalone to Interactive or from Interactive
to Standalone.
4. Press the Return or Menu button on the remote. The entire menu re-appears with your selection displayed in the
Hospitality Mode field.
✎After you have set the values in one TV, you can clone those values to multiple TVs. See USB Cloning on page 28.
20
English
¦Menu Items
To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTER
E
buttons in order.
To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any
changes you made are saved.
HD460S / HD470S / HD477S
Menu Item initial Value Description
Hospitality
Mode Hospitality Mode Standalone
Select the Hospitality mode.
•Standalone mode: TV works alone, without an SI STB or SBB
•Interactive mode: TV works with an SI STB or SBB
SI Vendor SI Vendor OFF
•Interactive mode : Samsung / OCC / MTI / Nstreams / Enseo / Cardinal /
Guestek / Seachange / EBL / MDC / Innvue
•Stand-alone mode : OFF / Smoovie / SSCP
Power On
Power On Channel Last Saved
Set the default values that will be applied when the TV is turned on.
•User Defined : Lets you set Power On Channel and Channel Type manually. See
Power On Channel and Channel Type below.
•Last Saved : If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
Power On Channel
Num … When the TV is turned on, it switches automatically to this channel.
Power On Channel
Type …
•Select channel band : AIR (analog air band), DTV (digital air band), CATV (analog
cable band), CDTV (digital cable band)
Power On Volume Last Saved
•User Defined : Lets you set the Power On Volume manually. See Power On
Volume below.
•Last Saved : When the TV is turned on, it returns to the volume that had been
set when the power had been turned off.
Power On Volume
Num …
The TV turns on with this Volume Level in Stand Alone Hospitality mode.
Min Volume 0 The minimum Volume Level the user can set in Stand Alone Hospitality mode.
Max Volume 100 The maximum Volume Level the user in Stand Alone Hospitality mode.
Power On Source TV Select the input source the TV displays when turns on.
Power On Option Last Option
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
•Last Option : Returns to its last Power state. If it was in Stand-by, it returns to
Stand-by. If it was on, it turns on.
•Power On : When the power returns, the TV turns on.
•Standby : When the power returns, the TV enters the Standby mode.
Channel
Channel Setup Gives you direct, immediate access to some of the Channel menu functions on the
user Channel menu such as Auto Program, Antenna selection, etc.
Channel Editor
The Channel Editor lets you edit the channels stored in the TV's memory. Using
Channel Editor you can:
•Change the channel numbers and names, and sort the channels in your desired
channel number order.
•Apply the video mute to channels you select. The video mute blanks out the
video from a channel and outputs only the sound while displaying a speaker icon
on the screen.
The Channel Editor also lets you view information about each channel easily, without
your having to display each channel directly.
Channel Bank Editor
The Channel Bank Editor in conjunction with the SMOOVIE remote lets you control
the channels guests have access to
the channels a guest can access depend on
the Bank Card installed in their SMOOVIE remote
Mixed Channel Map OFF
•ON : Display the cable program channels with air program channels on the chan-
nel list at the same time.
•OFF : Display the cable program channels or air program channels on the chan-
nel list one time. (can`t display them both at the same time)
Dynamic SI ON
•ON : Check the DTV Program channel number. (If Dynamic SI is On, it is not
availale to edit DTV channels in Channel Editor.)
•OFF : Does not check the DTV Program channel number. (If Dynamic SI is Off,
it is available to edit DTV channels in Channel Editor, but additional DTV channel
program number update is not supported.)
21
English
Menu Item initial Value Description
Menu OSD
Picture Menu
Lock OFF Enable or disable the Picture Menu.
Menu Display ON
•ON : The Main Menu is displayed.
•OFF : The Main Menu is not displayed.
Tools Display OFF
•ON : The tools quick acess is displayed.
•OFF : The tools quick acess is not displayed.
Channel Menu Display OFF
•ON : The auto program is displayed.
•OFF : The auto program is not displayed.
Panel Button
Lock Unlock
Turning the front panel (local key) operations on/off.
•Unlock : Unlocks all panel keys.
•Lock : Locks all panel keys.
•OnlyPower : Locks all panel keys except the Power panel key.
•Menu/Source : Locks the Menu and Source panel keys.
Home Menu Display ON OFF : The Home Menu is not displayed.
ON : The Home Menu is displayed.
Home Menu Editor
•Home Menu is displayed.
Home Menu Auto
Start ON ON : The Home Menu is Auto Start.
OFF : The Home Menu is not Auto Start.
Clock
Clock Type OFF OFF : Close SW Clock.
SW Clock : Open SW Clock. (460S none)
Local Time Manual
Select the way to update clock data.
Use clock data from a DTV channel to set the clock automatically or set the clock
manually when the TV is in stand-alone mode.
Timer Type Wake Up
WakeUp : you can set a specific time for the TV to turn on automatically
OnOff : Have you TV turn itself on/off automatically at a specified time. you can set
three Times the most at the same time.
Time Channel Type … Use clock data from which DTV channel to set the clock
Time Channel Num
…
DTV channel Number
Music Mode
Music Mode AV OFF
Allows music output from an mp3/audio player connected to an AV Input Source on
the TV. When on, you can hear sound from the player through the TV whether there is
a video signal or not. Also mutes the video so the TV does not display a picture when
a guest is playing music. The TV's backlight, however, remains on.
Music Mode Backlight OFF When set to Off, the TV's backlight is turned off entirely when a guest uses the Music
mode. To save energy, set to Off.
Remote
Jack Pack
Priority AV 1 If the jack priority is set, the corresponding source is automatically set when a jack is
inserted according to the jack priority.
Priority HDMI 2 If the jack priority is set, the corresponding source is automatically set when a jack is
inserted according to the jack priority.
AV Option AV Select RJP AV Source (Source selection depends on Model).
HDMI Option HDMI 1
460S: HDMI
Select which HDMI source of the TV is connected to the RJP jack. (HDMI1/HDMI2/
HDMI3)
HDMI Music Mode OFF
Allows music output from an mp3/audio player connected to an HDMI Input Source.
When on, you can hear sound from the player through an HDMI input of the RJP
whether there is a video signal or not. (This option is only compatible with the Guest
link RJP.)
External
Source
USB Pop-up Screen Default
When a USB device is connected to the TV :
•Default : A popup window appears.
•Automatic : Opens the USB contents menu automatically.
•Disable : Neither the popup window nor the menu appears.
External Source
Banner ON
If set to On, the TV displays the External Source Banner (information) when you
change the TV source to another external input, press the Info key, or turn the TV on.
•ON : The External Source information is displayed on the TV screen.
•OFF : The External Source information is not displayed on the TV screen.
Auto Source OFF
•ON : When an external input source is connected to the TV, the TV identifies the
input source, and then automatically switches to that input source.
•OFF : Auto Source function is Off.
Anynet+Return
Source Power On Src Select the return TV source after stopping an Anynet+(HDMI-CEC) connection. (This
fuction is especially useful for the Guestlink RJP.)
22
English
Menu Item initial Value Description
Eco
Solution Energy Saving Off
Adjusts the brightness of the TV to reduce power consumption.
•Off: Turns off the energy saving function.
•Low: Sets the TV to low energy saving mode.
•Medium: Sets the TV to medium energy saving mode.
•High: Sets the TV to high energy saving mode.
Logo/
Message
Welcome Message OFF Displays a the Welcome Message for 5 seconds when the TV turns On.
Edit Welcome
Message Edits the Welcome Message.
Hospitality Logo OFF
Turns the Hospitality logo feature On or Off, If On, when the TV is turned on, the Logo
is displayed, before the signal from the initial source, for the amount of time set in
"Logo Display Time".
Hospitality Logo DL …
Downloads the Hospitality logo.
Hospitality logo file requirements:
•BMP or AVI files only.
•Max file size : BMP - 960 X 540. AVI - 30MB.
•The file can only be named samsung.bmp or samsung.avi.
Logo Display Time … Hospitality Logo Display Time (3/5/7 seconds).
Cloning
Clone TV to USB Clone the current TV options to a USB memory device.
Clone USB to TV Clone the saved TV options on a USB memory device to the TV.
Setting Auto Intialize OFF If you set Setting Auto Initialize to On, and the TV's power is turned off and on, the
guest side menu items are restored to their cloned values. See page 28.
REACH
Solution
REACH 3.0 OFF OFF : Close REACH 3.0
ON : Open REACH 3.0
REACH Channel … 87:Assign a DTV channel number to carry the update REACH data. This channel
number must be the same as the number set on the Reach server.
Group ID … All:Select the group ID of the REACH server. (Refer to the REACH server manual for
more details)
IPG Room Type …
You can receive up to 3 EPG information headed to the Americas according to
Room Type from SI, and it displays the appropriate channel list and EPG information
according to the value set on TV. For IPG Room Type, there are Default / Public /
Roomtype3 within the hotel Factory Install menu, and its default value is Default.
Ticker OFF
•ON : The TICKER content is displayed.
•OFF : The TICKER content is not displayed.
REACH Update Time …
Lets you set when data such as updated SW, cloning files, and S-LYNC REACH
contents is downloaded from the REACH server to the TV :
•1hour : Every hour
•2hour : Every 2 hours
•12:00 am : every 12:00 a.m.
•2:00 am : every 2:00 a.m.
•12:00 pm : every 12:00 p.m.
•2:00 pm : every 2:00 p.m.
REACH Update
Immediate …
•ON : Whenever the TV enters standby mode (the power cord is plugged in and
the power is off), the REACH data is updated on the TV.
•OFF : The REACH data is only updated on the TV at the REACH server update
time.
Room Number … Setting Room Number.
REACH Server
Version 0000 0000:Displays the current REACH data version.
Security
Password Input Input Password 00000000.
Password Setting … Set new Password.
Password Reset … Reset Password to 00000000.
Security Mode … Security Mode ON or OFF.
USB … USB Disable or Enable.
HDMI … HDMI Disable or Enable.
23
English
Menu Item initial Value Description
DRM
DRM Mode
OFF
477S:
Pro:Idiom
Configures CAS support.
OFF : Turns off CAS support.
LYNK DRM : Select to turn on S-LYNK DRM CAS support only.
Pro:idiom : Select to turn on Pro:Idim CAS support only. (only for 477S and above
models)
LYNK DRM,PI : Select to have the TV support S-LYNK DRM CAS and Pro:Idiom
CAS. (only for 477S and above models)
PI AES Data 0x0000 Displays the current state of Pro:Idiom AES. (only for 477S and above models)
PI AES Log OFF
PI AES Log consists of Pro:Idiom AES diagnostic register, here after referred as
AESD, values. These register log will help us diagnose PI key loss issue in the field
and provide solution for it. (only for 477S and above models)
View PI AES Log … Displays Pro:Idiom AES Log OSD (only for 477S and above models)
System
Self Diagnosis
for TV
Lets you check the state of the TV picture and sound.
•Picture Test : Use to check for picture problems. If the problem appears in the
test picture, select YES, and then follow the directions on the screen.
•Sound Test : Use to check for sound problems. If the problem occurs during the
test, select YES, and then follow the directions on the screen.
Self Diagnosis
for HTV
Lets you check the state of Pro:Idiom and its communication with the SI STB
or SBB. If you have any problems with the Pro:idiom encryption channel or the
communications with the SI STB or SBB, use this diagnosis function. If Pro:Idiom
DTV Channel Key Loss appears to have failed and the Pro:Idim encryption channel
has failed to play content, first check the broadcasting systems related to Pro:Idiom
encryption. If your broadcasting system does not have a problem, contact Samsung
Service. If STB SI Vendor Setting appears to have failed and communication with
the SI STB or SBB has failed, first check your SI STB or SBB. If your SI STB or SBB
does not have a problem, contact to Samsung Service.
SW Upgrade Lets you upgrade the TV SW with a USB memory stick. See Page 37.
Service Pattern OFF Lets you check the state of the TV picture by displaying picture test patterns. Press
the Menu button to turn off the test patterns and exit.
ATV Cable AGC Gain Default Lets you control the AGC gain of the analog cable channels. Don't change the
default value unless problems occur.
DTV OpenCable AGC
Gain Default Lets you control the AGC gain of the digital cable channels. Don't change the default
value unless problems occur.
Sound Bar Out OFF
ON : TV speaker sound will be mute. Sound will come out through HDMI. You must
connect the Sound Bar to hear the sound.
OFF : Sound will come out through TV speakers normally. (460S: none)
Contact Samsung Samsung Contact information
Standby LED ON ON : The LED light in fuction will be in red light.
OFF : The LED light in fuction will be light off.
TV reset Returns all settings on the TV to their factory defaults.
✎REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER
contents through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only
in stand-alone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the
REACH server product for more operating information.
24
English
HD450S
Menu Item initial Value Description
Power On
Power On Channel Last Saved
Set the default values that will be applied when the TV is turned on.
•User Defied : Lets you set Power On Channel and Channel Type manually. See
Power On Channel and Channel Type below.
•Last Saved : If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
Power On Channel
Num … When the TV is turned on, it switches automatically to this channel.
Power On Channel
Type …
•Select channel band : AIR (analog air band), DTV (digital air band), CATV (analog
cable band), CDTV (digital cable band)
Power On Volume Last Saved
•User Defied : Lets you set the Power On Volume manually. See Power On
Volume below.
• Last Saved : When the TV is turned on, it returns to the volume that had been set when
the power had been turned off.
Power On Volume
Num … The TV turns on with this Volume Level in Stand Alone Hospitality mode.
Min Volume 0 The minimum Volume Level the user can set in Stand Alone Hospitality mode.
Max Volume 100 The maximum Volume Level the user in Stand Alone Hospitality mode.
Power On Source TV Select the input source the TV displays when turns on.
Power On Option Last Option
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
• Last Option : Returns to its last Power state. If it was in Stand-by, it returns to
Stand-by. If it was on, it turns on.
•Power On : When the power returns, the TV turns on.
•Standby : When the power returns, the TV enters the Standby mode.
Menu OSD
Picture Menu Lock OFF Enable or disable the Picture Menu.
Menu Display ON
•ON : The Main Menu is displayed.
•OFF : The Main Menu is not displayed.
Channel Menu
Display OFF
•ON : The auto program is displayed.
•OFF : The auto program is not displayed.
Panel Button Lock Unlock
Turning the front panel (local key) operations on/off.
•Unlock : Unlocks all panel keys.
•Lock : Locks all panel keys.
•OnlyPower : Locks all panel keys except the Power panel key.
•Menu/Source : Locks the Menu and Source panel keys.
Home Menu Display ON OFF : The Home Menu is not displayed.
ON : The Home Menu is displayed.
Home Menu Editor
•Home Menu is displayed.
Home Menu Auto
Start ON ON : The Home Menu is Auto Start.
OFF : The Home Menu is not Auto Start.
25
English
Menu Item initial Value Description
Music
Mode
Music Mode AV OFF
Allows music output from an mp3/audio player connected to an AV Input Source on
the TV. When on, you can hear sound from the player through the TV whether there is
a video signal or not. Also mutes the video so the TV does not display a picture when
a guest is playing music. The TV's backlight, however, remains on.
Music Mode PC …
Allows music output from an mp3/audio player connected to an PC Input Source on
the TV. When on, you can hear sound from the player through the TV whether there is
a video signal or not. Also mutes the video so the TV does not display a picture when
a guest is playing music. The TV's backlight, however, remains on.
Music Mode Comp OFF
Allows music output from an mp3/audio player connected to an component Input
Source on the TV. When on, you can hear sound from the player through the TV
whether there is a video signal or not. Also mutes the video so the TV does not
display a picture when a guest is playing music. The TV's backlight, however, remains
on.
Music Mode
Backlight OFF When set to Off, the TV's backlight is turned off entirely when a guest uses the Music
mode. To save energy, set to Off.
External
Source Auto Source OFF
•ON : When an external input source is connected to the TV, the TV identifis the
input source, and then automatically switches to that input source.
•OFF : Auto Source function is Off.
Eco
Solution Energy Saving OFF
Adjusts the brightness of the TV to reduce power consumption.
•Off: Turns off the energy saving function.
•Low : Sets the TV to low energy saving mode.
•Medium : Sets the TV to medium energy saving mode.
•High : Sets the TV to high energy saving mode.
Cloning
Clone TV to USB Clone the current TV options to a USB memory device.
Clone USB to TV Clone the saved TV options on a USB memory device to the TV.
Setting Auto Intialize OFF If you set Setting Auto Initialize to On, and the TV's power is turned off and on, the
guest side menu items are restored to their cloned values. See page 28.
26
English
¦Using the Sports(or Soccer) Mode
Sports(or Soccer) Mode t
✎MENU m → Applications → Sports(or Soccer) Mode → ENTER E
This mode provides optimized condition for watching sports games.
• a (Zoom): Pause playback and divide the picture into 9 parts. Select a part to zoom it in. Press this button again to
resume.
✎If you turn the TV off while watching Sports(or Soccer) Mode, the Sports(or Soccer) Mode will be disable.
¦Welcome Message (not available for 450S)
The Welcome Message feature displays a custom message on the TV every time it is turned on.
– Welcome message settings are in the Hotel Option Menu.
– Set Welcome Message to ON to display the message when the TV is powered on.
Welcome Message OFF
Edit Welcome Message
Hospitality Logo OFF
Hospitality Logo DL ...
Logo Display Time ...
– You can make the Welcome Message up to 25 characters long and edit it in the Hotel Service menu.
– Welcome Message supports the following characters:
✎Capital Letters from A to Z.
– You can edit the Welcome Message by using the remote's navigation, color, and Enter buttons in the “Edit Welcome
Message” OSD (See the illustration below.)
Move Enter Return
a
b
{
}
Move to Left
Move to Right
Leave Black
Done
A B C D E F G
H I J K L M N
O P Q R S T U
V W X Y Z
W E L C O M E T O O U
R H O T E L _
Edit Welcome Message
Below are the general directions for navigating and changing letters on the Edit Welcome Message screen:
– Press the
a
button on the remote to move to the left in the message.
– Press the
b
button to move to the right.
– After you have selected a position in the message, use the arrow buttons on your remote to select a letter in the
alphabet below the message.
– Press Enter to place a letter into the position you selected.
– Press the
{
button to erase a letter in a position or enter a blank.
– Press Return or the
}
button to exit.
27
English
¦Hotel Logo (not available for 450S)
The Hospitality Logo function displays the Hotel's picture image when the TV is powered on.
– Hospitality Logo settings are the Hotel mode menus.
– The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on.
– If there is a logo image stored in memory and the Hospitality Logo option is on, the Hospitality logo is displayed when
the TV is turned on.
– The Hospitality logo is not displayed when the Hospitality found Logo option is off, even if the logo image has been
loaded into the TV.
Hospitality Mode Standalone System
SI Vendor OFF
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
Eco Solution
Logo/Message
Cloning
REACH Solution
Security
DRM
r
Welcome Message …
Edit Welcome Message …
Hospitality Logo OFF
Hospitality Logo DL …
Logo Display Time …
<Depending on model and region, some menu items may not exist.>
yHospitality Logo
– This option lets you choose whether the Hospitality Logo image is displayed or not.
– Initial value is OFF.
– Can be set to OFF or ON.
– When set to ON, the Logo Download and Logo Time Display menu items become accessible.
yHospitality Logo DL
– This option lets you download the logo image to the TV’s memory from a USB device.
– A wait message appears while the image is being copied to the TV.
– A "completed" message appears when the copy operation finishes successfully.
– The word "failed" appears if the copy operation was unsuccessful.
–No USB appears if no USB device is connected.
–No File appears if there is no file to copy on the USB device or the file is in the wrong format (must be a BMP or AVI
file). If No File appears and there is a logo file on the USB device, check the file format.
yLogo File Format
– The TV supports only BMP and AVI format.
– The file name must be samsung.bmp or samsung.avi.
– The maximum resolution of the BMP format is 960 x 540.
– The maximum file size for AVI format is 30MB.
– The TV does not change the size or scale of the image.
28
English
¦USB Cloning
The USB Cloning function lets you download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel
Setup) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you
create a standard array of settings and distribute that standard array to all the TVs in your facility.
• Cloning from TV to USB: Copies stored menu settings from a TV to a USB device.
1. Insert a USB drive into the USB port on the rear or side of the TV
2. Enter the hotel option menu by pressing these buttons in order. MUTE
→ 1 → 1 → 9 → ENTER E
3. Press the u or d button to select Clone TV to USB, and then press
the ENTER button.
4. The message Clone TV to USB is displayed. Press the ENTER E
button.
5. The TV displays one of the following messages:
• In Progress: Copying data to USB.
• Completed: Copy operation was successful.
• Failed: Copy operation was not successful.
• No USB: USB is not connected.
The clone folder will be labeled T-NT14LJAKUCB. (T-N14LJIBRCH)
✎The cloned values include the values on the Guest side menu (brightness,
picture size, contrast, etc.) and the Hotel side menu.
(5V 0.5A)
/ CLONING
USB
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
• Cloning from USB to TV: Copies menu settings from a USB device to a TV.
✎Shortcut: Turn the TV off, insert the USB device, turn the TV on, and then press the ENTER E button for 5 seconds.
To clone data to the TV using the Hotel menu, follow these steps:
1. Turn the TV off.
2. Insert the USB drive into the USB port on the rear or side of the TV.
3. Turn the TV on.
4. Enter the Interactive menu by pressing these buttons in order.
MUTE → 1 → 1 → 9 → ENTER E
5. Press the u or d button to select “Clone USB to TV”, and then press
the ENTER E button.
6. The message Clone USB to TV is displayed. Press the ENTER E
button.
7. The TV displays one of the following messages:
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
• In Progress: Copying data to TV.
• Completed: Copy operation was successful.
• Failed: Copy operation was not successful.
• No USB: USB is not connected
• No File: There is no file to copy on the USB device. If you get a No File message, check the folder on your
USB device. The folder name should be T-NT14LJAKUCB. (T-N14LJIBRCH)
✎Tables that list the settings that are cloned in the Interactive and Standalone Hotel Menus begin on the next
page.
29
English
• Settings Cloned in the Hotel Menu
Menu Item Cloning Support
Hospitality Mode Yes
SI Vendor Yes
Power On Channel Yes
Power On Channel Num Yes
Power On Channel Type Yes
Power On Volume Yes
Power On Volume Num Yes
Min Volume Yes
Max Volume Yes
Power On Source Yes
Power On Option Yes
Channel Setup No
Channel Editor No
Mixed Channel Map No
Dynamic SI No
Picture Menu Lock Yes
Menu Display Yes
Tools Display Yes
Channel Menu Display Yes
Panel Button Lock Yes
Home Menu Display Yes
Home Menu Editor Yes
Home Menu Auto Start Yes
Clock Type Yes
Local Time Yes
Timer Type Yes
Time Channel Type Yes
Time Channel Num Yes
Music Mode AV Yes
Music Mode Backlight Yes
Priority AV Yes
Priority HDMI Yes
AV Option Yes
HDMI Option Yes
HDMI Music Mode Yes
USB Pop-up Screen Yes
External Source Banner Yes
Auto source Yes
Anynet+Return Source Yes
Energy saving Yes
Welcome Message Yes
30
English
Menu Item Cloning Support
Edit Welcome Message Yes
Hospitality Logo No
Hospitality Logo DL Yes
Logo Display Time Yes
Clone TV to USB Yes
Clone USB to TV Yes
Setting Auto Intialize Yes
REACH 3.0 Yes
REACH Channel Yes
Group ID No
IPG Room Type No
Ticker Yes
REACH Update Time Yes
REACH Update Immediate Yes
Room Number Yes
REACH Server Version Yes
Password Input Yes
Password Setting No
Password Reset Yes
Security Mode Yes
USB Yes
HDMI Yes
DRM Mode No
PI AES Data No
PI AES Log Yes
View PI AES Log No
Self Diagnosis for TV No
Self Diagnosis for HTV No
SW Upgrade No
Service Pattern Yes
ATV Cable AGC Gain Yes
DTV OpenCable AGC Gain Yes
Sound Bar Out Yes
Contact Samsung No
Standby LED Yes
TV reset No
31
English
¦Multi Code Remocon
A Multi Code Remocon is a special remote which is designed to control multiple TVs.
This function is useful where there is more than one TV in a location.
You can control up to 10 TVs with a different ID code of each remote with no conflicts between the TVs. ID numbers are
displayed on each TV's OSD.
The Initial ID code for each TV is “0”.
– You can set and reset the ID code in Analog TV mode or PC mode. (Not available in DTV mode.)
– You can set the ID code to any digit from 0 to 9.
– To set a TV's ID code, follow these steps:
1. Aim the remote at the TV, and then press the MUTE button and the RETURN button simultaneously for more than
7 seconds. When you stop pressing the buttons, the TV displays the current ID in the middle of the screen and
the words, "Remote control code is set to x. If you want to change the Remote control code, enter the digit you
want to change."
2. Press the number on the remote you want to assign to the TV. The TV displays the following words:
"Remote control code is changed to x."
✎The TV will display the OSD until you press the Exit button.
See the example below.
Remote control code is set to 0. If you want to change
Remote control code, enter the digit you want to
change.
Example: After you see the message above, if you press 1, the TV and Remote will be set to ID code 1. The TV then
displays the following message: “Remote control code is changed to 1”The TV can then only be controlled by a
remote which has the same ID code (1).
– To reset the ID code, press the MUTE button and the EXIT button simultaneously for more than 7 seconds. When
you stop pressing the buttons, the ID codes of the TV and Remote are reset to “0”. “Remote control code is set to 0.”
appears on the TV.
32
English
¦Setting Auto Initialize
When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings: Picture,
Sound, Input, Channel, Setup, and Hotel Setup. This lets you set nearly all of the menu values on your hospitality TVs to
the same, standard settings. If you allow guests access to the guest side menus, for example the Picture menu, they can
change the settings in those menus so they are no longer standard. If you set the Setting Auto Initialize function to on the TV
automatically restores (initializes) any guest-side menu values to the cloned, standard values when the TV is turned off and
then turned on again. Note that Setting Auto Initialize works on cloned guest side menu values only. Settings which have not
been cloned are ignored.
The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize function to
on.
Menu Menu Item
Picture Menu
Picture Mode
Backlight
Contrast
Brightness
Sharpness
Color
Tint (G/R)
Picture Size
Picture Size
Position
PIP
Advanced Settings
Dynamic Contrast
Black Tone
Flesh Tone
RGB Only Mode
Color Space
White Balance
Gamma
Motion Lighting
Picture Option
Color Tone
Digital Clean View
MPEG Noise Filter
HDMI Black Level
Film Mode
Picture Off
Reset Picture
Menu Menu Item
Sound Menu
Sound Mode
Sound Effect
DTS TruSurround
DTS TruDialog
Equalizer
Speaker Settings
Speaker Select
Auto Volume
TV Installation Type
Reset Sound
System Menu
Menu Language
Time
Clock
Sleep Timer
Wake-up Timer
Eco Solution
Energy Saving
Eco Sensor (only for 40" and above models)
No Signal Power Off
Auto Power Off
Auto Protection Time
Change PIN
General
Game Mode
Boot Logo
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
Auto Turn Off
DivX® Video On Demand
33
English
¦Hotel Plug & Play
The Hotel Plug & Play function, which automatically performs the Hotel mode selection, Country Setup, Clock Setup, and
Picture mode Setup, runs once when power is first turned ON. Setup also runs automatically after you have executed a
Service Reset.
HD450S
Auto Program
Auto Program is incomplete.
0 channels are memorized.
Change Settings Scan Again
DTV Air0
Air
Cable
0
0
If you select
Change
If you select
Standalone Only TV will enter the RF mode.
appears for 3 seconds
If you don’t change the country of the Current Location
If you select Skip
If you select
Standalone Setup
Select your language
Hospitality Option Menu
appears,press Power
OFF to exit
Select Picture mode
Select Clock Mode and your Time Zone
Select the channel
band to use for Auto
Program
After Searching
channels.
If you select Factory Reset,the TV resets all values to their factory defaults and then
displays the Hospital Plug & Play menu below when powered on again.
The TV is automatically
turned off and on.
If you change the country of
the Current Location
Local Set
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Current Localset : US
Local Set
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Current Localset : BRA_DTV(or ARG_DTV)
Change Skip
Change Skip
Easy Set up
Standalone Setup
(Continue Setup)
Standalone Only
(End Setup)
If you select this, Easy
setup will be started.
There are Essential
Details, Channel Scan,
Clock and Terms in Easy
setup.
c
Select your Language
Select your language to start the on screen setup.
The Language Setting will be applied to Main Menu and not Plug and Play.
Press the arrow buttons
to move around the
screen.
Press the Enter button to
select.
English
Español
age
Press th
earrow
buttons
c
Português
Configure your TV
Picture Mode Standard
Choose a picture mode
that best suits your
viewing enviroment.
Select your information in all of the categories
below.
TV Setup Complete!
Your TV is now ready to use.
OK
Auto Program
Antenna Both
Select current connected
antenna.
To get channels, set the options below then select
Scan.
Scan
Auto Program
Auto Program is channels for you...
Air 13
4%
Stop
DTV Air0
Air
Cable
0
0
Clock
-- : -- --
You can adjust your time to set DST, Time Zone and
clock mode Set current date and time
Clock Mode Auto
Date
-- / -- / ----
Time
-- : -- --
Time Zone South and Southeast
Local Set
Warning! TV might not function if local set is not correctly configured.
When Local set is changed, TV will turn off automatically to apply it.
BRA_DTV(or ARG_DTV)
Countries List
None
Standalone mode has been set.
OK
P
w
Factory Reset
Type
Local Set
SW Model
BOM Model
HD450
32S6AH0JJ
BRA_DTV(or ARG_DTV)
Tuner
Ch TableNONE
MRT Option
Engineer Option
S_TC
450
Power On
Menu OSD
Music Mode
External Source
Eco Solution
Cloning
(Press power off+1+8+2+power on to enter)
34
English
HD460S / HD470S / HD477S
Auto Program
Auto Program is incomplete.
0 channels are memorized
Change Settings Scan Again
DTV Air0
Air
DTV Cable
Cable
0
0
0
If you select
Change
If you select
Standalone Only
If you select
Interactive
TV will enter the RF mode.
Press Power OFF to exit.
Interactive
Hospitality Option Menu
appears.
If you don’t change the country of the Current Location
If you select Skip
If you select
Standalone Setup
Select your language
Press Power OFF to exit.
Select Picture mode
Select Clock Mode, DST, and your Time Zone
Select the channel
band to use for Auto
Program
After Searching
channels.
If you select TV Reset, the TV resets all values to their factory defaults
and then displays the Hospital Plug & Play menu. Go to the first
Hospital Plug & Play screen below.
The TV is automatically
turned off and on.
If you change the country of
the Current Location
Local Set
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Current Localset : US
Change Skip
Local Set
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Current Localset : US
Change Skip
Easy Set up
Intertactive
(460S none)
(Hotel Menu)
Standalone Setup
(Continue Setup)
Standalone Only
(End Setup)
If you select this, the
setup process will be
completed and go to
hotel menu
c
Select your Language
Select your language to start the on screen setup.
The Language Setting will be applied to Main Menu and not Plug and Play.
Press the ▲▼◄►
buttons to move the
highlight.
Press the enter button
to select.
English
Español
Français
age
Press
the
▲▼◄►
c
Configure your TV
Picture Mode Standard
Choose a picture mode
that best suits your
viewing enviroment.
Select your information in all of the categories
below.
TV Setup Complete!
Your TV is now ready to use.
OK
Auto Program
Antenna Both
Digital Cable System STD
Analog Cable System STD
Select current connected
antenna.
To get channels, set the options below then select
Scan.
Scan
Auto Program
Auto Program is channels for you...
Air 21
6%
Stop
DTV Air0
Air
DTV Cable
Cable
0
0
0
Clock
-- : -- --
You can adjust your time to set DST, Time Zone and
clock mode. Set current date and time
Clock Mode Auto
Date
-- / -- / ----
Time
-- : -- --
DST Off
Time Zone Eastern
Local Set
Warning! TV might not function if Local Set is not correctly configured.
When Local set is changed, TV will turn off automatically to apply it.
US
Countries List
USA
Standalone
Hospitality Option Menu
appears.
Self Diagnosis for TV
Self Diagnosis for HTV
SW Update
Service Pattern
ATV cable AGC Gain
OFF
DTV OpenCable AGC Gain
Sound Bar OutOFF
Contact Samsung
Standby LEDON
Default
Default
TV Reset
P
w
35
English
HD450S
yLocal Set OSD
– Initially highlighted: BRA_DTV(or ARG_DTV)
– If you press the Enter key after selecting Change, you can change the country.If the country is changed, the TV
automatically turns off and on.
– If you select the incorrect country,execute Factory Reset again after entering the Factory menu.
– If you don`t want to change the country,select skip.
yEasy Set Up OSD
– Initially highlighted: Standalone Setup
– If you select the Standalone Only button, Standalone hospital mode is set by default and the “Standalone mode has
been set” OSD appears for 3 seconds.
– TV enters into RF mode automatically after displaying the “Standalone mode has been set” OSD for 3seconds.
– If you select Standalone Setup mode, the “Select your Language” OSD appears.
ySelect your Language OSD
– Initially highlighted: Português(or Español)
– Display time: OSD time out and operation are the same as Samsung’s consumer TV models.
– If you press the Enter key, the “Configure your TV” OSD appears.
yConfiure your TV OSD
– Initially highlighted: Standard.
– The TV displays the Picture Mode OSD where you can choose Dynamic or Standard Picture mode.
yAuto Program Mode OSD
– If you press the Enter key, the TV automatically searches for channels.
ySet Clock Mode and Time Zone OSD
– Initially highlighted: Clock Mode : Auto, Time Zone :South and Southeast
– If the TV will be tuned to digital broadcast channels, and these channels transmit date and time information, set the
Clock Mode to Auto. The TV will set the date and time automatically.
– If the TV will not be tuned to digital broadcast channels,set the Clock Mode to Manual, and then set the date and
time on the TV manually.
– Select your time zone on the map appears.
36
English
HD460S / HD470S / HD477S
yLocal Set
– Initially highlighted: US
– If you press the Enter key after selecting Change, you can change the country.
– If the country is changed, the TV automatically turns off and on.
– If you select the incorrect country, execute TV Reset again after entering the Service section of the Hospital Menu.
yEasy Set Up OSD
– Initially highlighted: Interactive
– If you select the Standalone Only button,Standalone hospital mode is set by default and the“Standalone mode has
been set” OSD appears for 3 seconds.
– TV enters into RF mode automatically after displaying the “Standalone mode has been set” OSD for 3 seconds.
– If you select Interactive mode, the Interactive Setup Menu is displayed. Press the power off key to exit the Interactive
menu.
– If you select Standalone setup mode, the “Select your Language” OSD appears.
ySelect Menu Language OSD
– If you select Standalone setup from the “Select Hospital TV Mode” OSD, the “Select Menu Language” OSD appears.
– Initially highlighted: English
– Display time: OSD time out and operation are the same as Samsung’s consumer TV models.
– If you press the Enter key, the “Picture Mode” OSD appears.
yConfigure your TV OSD
– Initially highlighted: Standard
– The TV displays the Picture Mode OSD where you can choose Dynamic or Standard Picture mode.
yAuto Program OSD
– If you press the Enter key, the TV automatically searches for channels.
– After the automatically searches for channels complete,press the next button to continue.
ySet Clock Mode, DST(Daylight saving time), andTimeZone OSD
– Initially highlighted: Clock Mode : Auto, DST : Off, TimeZone : Eastern
– If the TV will be tuned to digital broadcast channels,and these channels transmit date and time information,set the
Clock Mode to Auto. The TV will set the date and time automatically.
– If the TV will not be tuned to digital broadcast channels,set the Clock Mode to Manual, and then set the date and
time on the TV manually.
– Set DST On or Off to apply or not apply daylight saving time to the TV.
– Select your time zone on the map appears.
37
English
¦USB Software Upgrade Method
Samsung may offer upgrades to the TV’s SW in the future. Please contact the Samsung Hospitality Hot line at the last page
to receive information about downloading upgrades and using a USB drive to update the SW by connecting the USB drive
containing the upgrade to the USB port located on the TV.
When the software is upgraded, video and audio settings you have made will return to their default (factory) settings. We
recommend you clone the hotel settings so that you can easily reset them after the upgrade.
To upgrade the TV's software, follow these steps:
1. Insert a USB drive containing the SW upgrade into the USB port on the side of the
T V.
2. Press the MENU button to display the menu.
Press the u or d button to select Support, and then press the ENTER E button.
3. Press the u or d button to select SW Upgrade, and then press the ENTER E
button. The message "Scanning for USB. This may take more than 1min." is
displayed.
4. The message "Upgrade version XXXX to version XXXX? The system will be reset
after upgrade." is displayed.
Press the l or r to select the OK, and then press the ENTER E button.
(5V 0.5A)
/ CLONING
USB
Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will
turn off and turn on automatically after completing the SW upgrade. Please check the SW version after the upgrades are
complete.
38
English
¦Sound Bar (not available for HD450S/460S model)
ySamsung Sound-Bars and Hospitality TVs in 2015
– Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI 1.4. If you connect a compatible
Samsung Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to the
TV's sound through the Sound-Bar.
– The item of Sound bar Out in Hospitality Option Menu makes you control to where the TV sound is outputted when
the TV is turned on.
– If Sound bar Out is On, the TV sound is automatically outputted in the Sound Bar device only whenever TV is turned
on.
– If Sound bar Out is Off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on.
– Models supporting the ARC function are listed below:
• Sound-Bars: HW-E350/E450/E550
HW-F350/F355/FM35/F450/FM45/FM45C/F550/F551/FM55/FM55C/F750/F751
ySetting the Sound-Bars to Hotel Mode
1. Set the following Hotel menu options:
– Hotel option > External Device > Sound Bar Out = On.
– Hotel option > Power On > Power On Volume = User Defined.
– Hotel option > Power On > Power On Volume Num > Set greater than 0.
– Hotel option > Power On > Max Volume > Set greater than 0.
2. Connect an HDMI cable from the HDMI OUT jack on the back of the Sound-Bar to the HDMI3 port (supporting ARC)
on the hospitality TV.
3. After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects
the TV, and then automatically switches to Hotel Mode.
Sound Bar Hotel mode functional characteristics:
• Power On/Off is synchronized with the TV
• HDMI_CEC defaults set to On
• Functions through the “HDMI OUT” port only
• Disables the "Input mode" key on the VFD to prevent unexpected audio-source changes.
• Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. The Sound-Bar's
Power On Volume and Max Volume values, however, are ½ of the Power On Volume and Max Volume settings
in the TV's Hotel option menu. Example: If the TV's Power On Volume=20 and Max Volume=90, then the
Sound Bar's Power On Volume=10 and Max Volume=45.
39
English
¦Channel Bank Editor (Smoovie TV Only)
The Channel Bank Editor in conjunction with the SMOOVIE remote lets you control the channels guests have access to.
The Channel Bank Editor provides three Banks of channels and lets you select which channels will be available from each
bank. SMOOVIE remotes have instalable Bank Cards which correspond to the channel banks in the Channel Bank Editor.
The remotes only allow access to channels in the channel bank that correspond to the installed card. Consequently, the
channels a guest can access depend on the Bank Card installed in their SMOOVIE remote.
Setting the Channel Bank Editor under Stand-alone Mode
1. Press MUTE + 1 + 1 + 9 + ENTER E on the remote to enter the Hotel Standalone menu.
2. Go to SI vendor, and then select : “Smoovie”
3. Find the new menu option, “Channel”.
4. Enter the “Channel Bank Editor”.
Hospitality Mode
Standalone
SI Vendor
OFF
d
SI Vendor
Smoovie
d
Channel
d
Channel Bank Editor
5. Edit the Channel Bank. An example is below.
a. Bank1 (Free channel): Select the channels that will be accessible when a remote doesn’t have a card.
b. Bank2 (Family Card - Green): Select the channels that will be accessible when a remote has a GREEN CARD.
c. Bank3 (Adult Card - Red): Select the channels that will be accessible when a remote has a RED CARD.
40
English
Information About SMOOVIE Remote Controls
Channel Bank Editor
3 ----- (Air)
Registered
4 ----- (Air)
6 ----- (Air)
9-1 ----- (Air)
11 ----- (Air)
Bank1 (0) Bank2 (0) Bank3 (0)
13 ----- (Air)
14 ----- (Air)
15 ----- (Air)
28 ----- (Air)
63-1 SY5000
Select ReturnDeselect All Items On ColumnSelect All Items On Column
• If you select SMOOVIE as the SI vendor, you should also use SMOOVIE remotes in your facility.
• Guests with remotes that do not have a card can only view channels from Bank 1.
• Guests using the Numeric keys on the remote to change channels can only view channels from Bank 1.
• Guests with remotes that have Green or Red cards must use the channel up/down keys to change channels.
• Guests can only see channels from the Bank1 channel list In the Channel Guide or the Channel List.
Smoovie Set Up Sequence
Step
Smoovie TV Setup (Air/ Cable )
Only Air or Cable used
Only Air or Cable used
If the TV starts with Hotel Plug&Play If Hotel Plug&Play already done
1 Do a complete P&P (including Air or Cable auto tune) Enter the Hotel menu
2 After P&P, the TV displays the Hotel menu
Select the channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
3
Select the channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
Select Smoovie TV in the Hotel menu
4 Select Smoovie TV in the Hotel menu Select Channel Setup
5 Select Channel Setup (Can be skipped) Select "Air" or "Cable" to auto tune
6 Select "Air" or "Cable" to auto tune. (Can be skipped,)
Set up channels in the CH Bank Editor
7 Set up channels in the CH Bank Editor
After power off & on, guests can use the TV
8 After power off & on, guests can use the TV
9
10
41
English
¦Channel Editor (not availiable for 450S model)
The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel Editor you can:
– Change the channel numbers and names, and sort the channels in your desired channel number order.
– Apply the video mute to channels you select. The video mute blanks out the video from a channel and outputs only the
sound while displaying a speaker icon on the screen.
– The Channel Editor also lets you view information about each channel easily, without your having to display each channel
directly.
Hospitality Mode Standalone System
SI Vendor OFF
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
Eco Solution
Logo/Message
Cloning
REACH Solution
Security
DRM
r
Channel Editor
<Depending on model and region, some menu items may not exist.>
General Steps for Using the Channel Editor in Stand-alone Mode
Step Broad Outline
1 Run ‘Channel’ in the Hotel Option Menu.
2 Enter ‘Channel Editor’ in the Hotel Option Menu.
3 On a piece of paper, compile a list of channels you want to have, arranged in the order you want.
4 Rearrange channels and edit channel names with the TOOLS Button based on the list you compiled.
5 Press the EXIT or RETURN Button to exit.
<For a detailed explanation of how Channel Editor works, see pages 39 through 44.>
42
English
The picture below shows a sample Channel Editor screen.
30 ----- (Air)
22 ----- (Air)
81 ----- (Cable)
72 ----- (Cable)
HDMI2/DVI
AV
50-2 CH 50.2
50-4 CH 50.4
27 ----- (Air)
73 ----- (Cable)
HDMI1
HDMI3
50-1 CH 50.1
20-2
50-3 CH 50.3
51-1 KUSI-HD
• a Indicates an analog channel.
• Channels without an a are digital channels.
✎If Dynamic SI in the Hospitality Option Menu is On, Channel Editor will display no digital channels. You must set Dynamic SI to
Off before you can edit digital channels in Channel Editor.
• The guide at the bottom of the Channel Editor menu displays the remote buttons you need to press to apply Channel
Editor functions.
1 Using the remote's up or down arrow key, highlight the channel that you want to edit.
– To edit more than one channel, move the highlight to a channel, and then press the ENTER E key. A check will
appear in the check box next to the channel. Repeat for each channel you want to edit.
2 To delete the channel or channels you selected from the channel list, press the red button on the remote.
– To delete two or more channels simultaneously, select multiple channels in Step 1, and then press the red button
on the remote.
✎If you want to delete the scambled channels,you should run the process below Hotel option > Channel >
Channel Setup > Channel Settings > Clear Scrambled Channel.
3 Press the green button on the remote to select all channels.
4 To apply the video mute, press the yellow button on the remote.
– To apply the video mute to two or more channels simultaneously, select multiple channels in Step 1, and then
press the yellow button on the remote.
5 To view information about a channel, press the INFO button on the remote.
6 Press the TOOLS button on the remote to rename a channel or change the channel number.
Channel Editor Functions and Remote Button
a Red (Delete): Deletes a channel from the channel list.
b Green (Select All): Selects all channels at once.
{ Yellow (Video Mute On/Off): You can set the Video Mute On/Off.
U (Page): Moves to next or previous page.
` (Information): Display details of the selected channel.
T (Tools): Displays the option menu.
R (Return): Returns to the previous step or exits.
43
English
When you press the TOOLS button, the following menu is available
27 ----- (Air)
73 ----- (Cable)
HDMI1
HDMI3
50-1 CH 50.1
20-2
50-3 CH 50.3
51-1 KUSI-HD
• Edit Channel Number
Use Edit Channel Number to change the channel number of a channel you select.
To change a channel number, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Press the TOOLS button on your remote.
3. Select Edit Channel Number in the Tools menu.
4. Use the up or down arrow keys to change the channel number.
5. Select OK when done, and then press the ENTER E button.
✎When you change the channel number, the channel information is not updated automatically.
• Rename Channel
Use Rename Channel to change the name of a channel you select.
To change the name of a channel, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Press the TOOLS button on your remote.
3. Select Rename Channel in the Tools menu.
4. Use the on-screen keyboard that appears to enter the new name for the channel.
Use the arrow buttons on your remote to select a letter or number, and then
press Enter. Repeat for each letter or number you want to select.
5. When finished, select Done on the bottom of the screen, and then press the
ENTER E button.
• Information
Use Information to view information about a channel you select.
To view information about a channel, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Press the TOOLS button on your remote.
3. Select Information in the Tools menu.
4. Select OK, and then press the ENTER E button to close the Information screen.
Edit Channel Number
ABC HD_
U
Adjust
E
Space
R
Return
Ok
Cancel
4
Rename Channel
Enter new name for CH 4 (Max Length = 24)
ABC HD_
a
Delete
{
Space
R
Return
Done Cancel
abcdef123
g h i j k l 456
mnopq r 789
s t u v w x yz0
A/a Space ◄ ►
Edit Channel Number
ABC HD_
U
Adjust
E
Space
R
Return
Ok
Cancel
4
Rename Channel
Enter new name for CH 4 (Max Length = 24)
ABC HD_
a
Delete
{
Space
R
Return
Done Cancel
abcdef123
g h i j k l 456
mnopq r 789
s t u v w x yz0
A/a Space ◄ ►
44
English
The external sources of this TV are displayed in the last page of the Channel Editor menu as shown in the example below.
In the example, there are four external sources connected to the TV, HDMI1, HDMI2(DVI), HDMI3 and AV.
– You can assign a new analog channel to an external source by selecting the source on the last page, pressing the
TOOLS button, selecting Edit Channel Number, and then using the up or down arrow button on the remote to select
the channel number of the analog channel.
– If you tune to a channel after assigning the channel to an external source, you can enter the external source without
opening the TV source menu.
30 ----- (Air)
22 ----- (Air)
81 ----- (Cable)
72 ----- (Cable)
HDMI2/DVI
AV
50-2 CH 50.2
50-4 CH 50.4
27 ----- (Air)
73 ----- (Cable)
HDMI1
HDMI3
50-1 CH 50.1
20-2
50-3 CH 50.3
51-1 KUSI-HD
27 ----- (Air)
20-2
73 ----- (Cable)
51-1 KUSI-HD
999 HDMI1
AV
50-1 CH 50.1
50-3 CH 50.3
22 ----- (Air)
72 ----- (Cable)
81 ----- (Cable)
HDMI3
30 ----- (Air)
20-1
50-2 CH 50.2
50-4 CH 50.4
After assigning channel number
999 to HDMI1 source.
45
English
Installing the Wall Mount
[Wall or Ceiling Mounting
If you mount this product on a wall, it should be mounted only as recommended by the manufacturer. Unless it is correctly
mounted, the product may slide or fall, causing serious injury to a child or adult, and serious damage to the product.
Preparing before installing Wall-Mount
Before installing any other wall mounting kit,assemble the
wall mount adapter provided separately with the TV.
✎The product shape may differ depending on the
model.
Installing the Wall Mount Kit
The wall mount kit (sold separately) lets you mount the TV on the wall. For detailed information about installing the wall
mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount
bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to
install the wall mount on your own.
To order the wall mount, contact Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864).
Wall Mount Kit Specifications (VESA)
✎The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to building materials other than plaster
board, please contact your nearest dealer. If you install the wall mount on a ceiling or slanted wall, TV may fall and cause
severe personal injury.
✎NOTE
• Standard dimensions for wall mount kits are shown in the table below.
• Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided.
• Do not use screws that do not comply with the VESA standard screw specifications.
• Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal
injury. Samsung is not liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
the consumer fails to follow the product installation instructions.
• Do not mount the TV at more than a 15 degree tilt.
• Always have two people mount the TV onto a wall.
Product
Family
TV size in
inches
VESA screw hole specs
(A * B) in millimeters
Standard Screw
(Length* Pitch in mm) Quantity
LED-TV 32 200 X 200 M8 4
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric
shock.
Wall mount Adapter
( Depending on the Model )
46
English
Securing the TV to the Wall
[
Caution
Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children
do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries
or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
To Avoid the TV from Falling
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎You may need additional material such as an anchor depending on the type
of wall.
✎Since the necessary clamps, screws, and string are not supplied, please
purchase these additionally.
2. Remove the screws from the back center of the TV, put the screws into
the clamps, and then fasten the screws onto the TV again.
✎Screws may not be supplied with the product. In this case, please purchase
the screws.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall
with a strong string and then tie the string tightly.
✎NOTE
• Install the TV near to the wall so that it does not fall backwards.
• It is safe to connect the string so that the clamps fixed on the
wall are equal to or lower than the clamps fixed on the TV.
• Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt about
the security of your connections, contact a professional installer.
Wall
47
English
Anti-theft Kensington Lock
The Kensington Lock is a device you can use to physically fix a TV
to a location when you use it in a public place. The appearance and
locking method may differ from the illustration at right, depending on the
manufacturer. Refer to the manual provided with the Kensington Lock for
additional information on proper use.
The Kensington Lock is not supplied by Samsung.
✎Please find a “K” icon on the rear of the TV. A Kensington slot is
beside the “K” icon.
1
<Optional>
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair.
2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product 1.
4. Lock the lock.
✎These are general instructions. For exact instructions, see the User manual supplied with the locking device.
✎The locking device has to be purchased separately.
✎The location of the Kensington slot may be different depending on the TV model.
48
English
Specifications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Model Name HG32ND450S HG32ND460S
Display Resolution 1366 x 768
Screen Size
(Diagonal)
32” Class
(31.5” measured diagonally)
Sound (Output) 5W x 2
Dimensions (WxDxH)
Body
With stand
745.4 x 69.0 x 442.2 mm
745.4 x 150.5 x 466.6 mm
745.4 x 69.0 x 442.2 mm
745.4 x 150.5 x 466.6 mm
Weight
Without Stand
With Stand
3.73 kg
3.82 kg
3.97 kg
4.06 kg
Model Name HG32ND470S / HG32ND477S
Display Resolution 1366 x 768
Screen Size
(Diagonal)
32” Class
(31.5” measured diagonally)
Sound (Output) 5W x 2
Dimensions (WxDxH)
Body
With stand
745.4 x 69.0 x 442.2 mm
745.4 x 150.5 x 466.6 mm
Weight
Without Stand
With Stand
3.97 kg
4.06 kg
✎Design and specifications are subject to change without prior notice.
✎This device is a Class B digital apparatus.
49
English
Supported Video Formats
File Extention Container Video Codec Resolution Frame rate(fps) Bit rate(Mbps) Audio Codec
*.avi / *.mkv
*.asf / *.wmv
*.mp4 / *.3gp
*.vro / *.mpg
*.mpeg / *.ts
*.tp / *.trp
*.mov / *.flv
*.vob / *.svi
*.divx
AVI
MKV
ASF
MP4
3GP
MOV
FLV
VRO
VOB
PS
TS
DivX 3.11/4.x/5.x/6.x
1920 x 1080
6~30
30
Dolby Digital
LPCM
ADPCM
(IMA, MS)
AAC
HE-AAC
WMA
Dolby Digital Plus
MPEG (MP3)
DTS (Core)
G.711(A-Law,
μ-Law)
MPEG4 SP/ASP
H.264 BP/MP/HP
Motion JPEG 640 x 480 8
Window Media Video v9
1920 x 1080 30
MPEG2
MPEG1
*.webm WebM VP8 20 Vorbis
✎Other Restrictions
• Video content will not play, or not play correctly, if there is an error in the content or the container.
• Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec listed
in the table.
• If the Index Table is in error, the Seek (Jump) function is not supported.
• Some USB/digital camera devices may not be compatible with the player.
• The menu can be displayed late if the video is over 10Mbps(bit rate).
Video decoder Audio decoder
• Supports up to H.264, Level 4.1 (FMO/ASO/RS are not supported.)
• frame rate :
−Below 1280 x 720: 60 frame max
−Above 1280 x 720: 30 frame max
• VC1 AP L4 is not supported.
• GMC is not supported.
• WMA 10 Pro supports up to 5.1 channel and M2 profile.
• WMA lossless audio is not supported.
• Vorbis supports up to 2ch.
• Dolby Digital Plus supports up to 5.1 channel.
50
English
Supported Photo Formats
File Extension Type Resolution
*.jpg
*.jpeg JPEG 15360 X 8640
*.bmp BMP 4096 X 4096
*.mpo MPO 15360 X 8640
Supported Music Formats
File Extension Type Codec Remark
*.mp3 MPEG MPEG1 Audio
Layer 3
*.m4a
*.mpa
*.aac
MPEG4 AAC
*.flac FLAC FLAC Can support up to 2channel
*.ogg OGG Vorbis Can support up to 2channel
*.wma WMA WMA
WMA 10 Pro supports up to
5.1 channel and M2 profile.
(WMA lossless audio is not
supported.)
*.wav wav wav
*.mid
*.midi midi midi Can not support seeking
Supported Subtitle Formats
• External
Name File extension
MPEG-4 timed text .ttxt
SAMI .smi
SubRip .srt
SubViewer .sub
Micro DVD .sub or .txt
SubStation Alpha .ssa
Advanced SubStation Alpha .ass
Powerdivx .psb
• Internal
Name Container ormat
Xsub AVI Picture Format
SubStation Alpha MKV Text Format
Advanced SubStation
Alpha MKV Text Format
SubRip MKV Text Format
MPEG-4 timed text MP4 Text Format
51
English
Dimensions
yFront view / Side view
HG32ND450S
1
2
3 4 5 6
8
7
9
(unit: mm)
1 2 3 4 5 6 7 8 9
HG32ND450S 745.4 699.7 394.3 433.9 442.2 466.6 37.3 69.0 150.5
HG32ND460S
1
2
3 4 5 6
8
7
9
(unit: mm)
1 2 3 4 5 6 7 8 9
HG32ND460S 745.4 699.7 394.3 433.9 442.2 466.6 37.3 69.0 150.5
52
English
HG32ND470S / HG32ND477S
1
2
3 4 5 6
8
7
9
(unit: mm)
1 2 3 4 5 6 7 8 9
HG32ND470S
HG32ND477S 745.4 699.7 394.3 433.9 442.2 466.6 37.3 69.0 150.5
53
English
yRear view
HD450S
2
1
3
6
5
4
(unit: mm)
123456
HG32ND450S 162.6 133.3 163.0 461.2 200.0 200.0
HD460S / HD470S / HD477S
2
1
3
6
5
4
(unit: mm)
123456
HG32ND460S
HG32ND470S
HG32ND477S
144.6 133.3 163.0 459.5 200.0 200.0
54
English
yStand base view
150.54
150.19
51.85 51.85
150.54
150.19
55
English
✎NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer
to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.
© 2015 Samsung Electronics America, Inc
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste
and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the
retailer where they purchased this product, or their local government office, for details of where and how they can take these items
for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery
contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of,
these substances can cause harm to human health or the environment. To protect natural resources and to promote material
reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.
¦Important Warranty Information Regarding Television Format Viewing
✎See the warranty card for more information on warranty terms.
Wide screen format LED Displays (with aspect ratios of 16:9, the ratio of the screen width to height) are primarily designed to display wide
screen format full-motion video. The images displayed on them should primarily be in the wide screen, 16:9 ratio format, or expanded to fill
the screen if your model offers this feature, and the images are constantly moving. Displaying stationary graphics and images on screen, such
as the dark sidebars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total
television viewing per week.
Additionally, viewing other stationary images and text such as stock market crashs, video game displays, station logos, web sites or computer
graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines
can cause uneven aging of LED displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the
programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer
picture sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LED aging as a result of format selection and use, as
well as burned-in images, are not covered by your Samsung limited warranty.
• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics
(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide
Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products
purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the
Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation
to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in
material or workmanship, and only those encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times,
exchanges or replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
– In the Unit
ed States : 1-866-894-0524
– In Canada : 1-800-213-8513
Disconnecting Device Instructions
Worded: "To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be
readily operable" or equivalent.
Outdoor Use Marking - UL
Worded: "WARNING - To Prevent damage which may result in fire or elctric shock hazard, do not expose this appliance to rain or moisture" or
equivalent.
Wet Location Marking - c-UL
Worded: "Apparatus shall not be exposed to dripping or splashing" and "Do not place a vessel containing water on this apparatus as this can
result in a risk of fire or electric shock" or equivalent.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Country Customer Care Center Web Site
CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/us/support
MEXICO 1-800-SAMSUNG (726-7864) www.samsung.com/us/support
U.S.A 1-866-894-0524 www.samsung.com/us/support
BRAZIL 0800-124-421 or 4004-0000 www.samsung.com/br/support
ARGENTINE 0800-555-SAMSUNG (0800-555-7267) www.samsung.com/ar/support
HD450S-460S-470S-477S-NA-ENG-00