Table of Contents
- Before Reading This Install Guide
- Operational Modes
- Warning! Important Safety Instructions
- 01 What's in the Box?
- 02 The Samsung Smart Remote
- 03 Controlling external devices with a Samsung Smart Remote - Using the Universal Remote
- 04 Initial Setup
- 05 The Connection Panel
- 06 Connections
- 07 Using a TV Viewing Card (“CI or CI+ Card”)
- 08 Setting the Hotel Option menu
- 09 Editing Channels
- 10 Specifications and Other Information
Samsung HG55Q60AAEU User Manual
Displayed below is the user manual for HG55Q60AAEU by Samsung which is a product in the Hospitality TVs category. This manual has pages.
Related Manuals
HG43Q60AA HG50Q60AA HG55Q60AA
HG65Q60AA HG75Q60AA
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at www.samsung.com
Model Serial No.
INSTALL GUIDE
English
Before Reading This Install Guide
This TV B2B (Business to Business) model is designed for hotels or the other hospitality businesses, supports a variety
of special functions, and lets you limit some user (guest) controls.
Figures and illustrations in this Install Guide are provided for reference only and may differ from the actual product
appearance. Product design and specifications may change without notice.
Operational Modes
This TV has two modes: Interactive and Standalone mode.
Interactive mode: In this mode, the TV communicates with and is fully or partially controlled by a connected Set
Back Box (SBB) or Set Top Box (STB) provided by a hospitality System Integration (SI) vendor. When the TV is initially
plugged in, it sends a command that attempts to identify the SBB or STB connected to it. If the TV identifies the
SBB or STB and the SBB or STB identifies the TV, the TV gives full control to the SBB or STB.
Standalone mode: In this mode, the TV works alone without an external SBB or the STB.
The TV has a Hotel Option menu that lets you easily set its various hospitality functions. Please see page 29.
The menu also lets you activate or de-activate some TV and hospitality functions so you can create your optimal
hospitality configuration.
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama
uneven screen wear, which will affect image quality. To reduce the chance that this effect will occur, please follow the
recommendations below:
Avoid displaying the same TV channel for long periods.
Always try to display a full screen image.
Reduce brightness and contrast to help prevent the occurrence of after-images.
Use all TV features designed to reduce image retention and screen burn-in.
English - 2
Warning! Important Safety Instructions
Please read the Safety Instructions before using your TV.
Refer to the table below for an explanation of symbols which may be on your Samsung product.
CAUTION Class II product: This symbol indicates that a
safety connection to electrical earth (ground)
is not required. If this symbol is not present on
a product with a main lead, the product MUST
have a reliable connection to protective earth
(ground).
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
AC voltage: Rated voltage marked with this
symbol is AC voltage.
This symbol indicates that high voltage is
present inside. It is dangerous to make any kind
of contact with any internal part of this product.
This symbol indicates that this product has
included important literature concerning
operation and maintenance.
Caution. Consult instructions for use: This
symbol instructs the user to consult the install
guide for further safety related information.
The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure
reliable operation of this apparatus and to protect it from overheating, these slots and openings must never be
blocked or covered.
–
ventilation is provided.
–
–
in a wet basement, or near a swimming pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an
authorised dealer immediately.
This apparatus uses batteries. In your community, there might be environmental regulations that require you to
dispose of these batteries properly. Please contact your local authorities for disposal or recycling information.
electric shock.
Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon
or against them. Pay particular attention to cords at the plug end, at wall outlets, and at the point where they exit
from the appliance.
To protect this apparatus from a lightning storm, or when left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due
to lightning and power line surges.
Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric shock.
To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this
apparatus.
Be sure to plug in the power cord until it is firmly seated. When unplugging the power cord from a wall outlet,
with wet hands.
If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from
it - unplug it immediately and contact an authorised dealer or Samsung service centre.
Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an
extended period of time (especially when children, elderly, or disabled people will be left alone in the house).
– Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to
generate sparks and heat or by causing the insulation to deteriorate.
Be sure to contact an authorised Samsung service centre for information if you intend to install your TV in a location
with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a
day such as in an airport, a train station, etc. Failure to do so may lead to serious damage to your TV.
Use only a properly grounded plug and wall outlet.
– An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
To turn off this apparatus completely, disconnect it from the wall outlet. To ensure you can unplug this apparatus
quickly if necessary, make sure that the wall outlet and power plug are readily accessible.
Store the accessories (batteries, etc.) in a location safely out of the reach of children.
service centre.
To clean this apparatus, unplug the power cord from the wall outlet and wipe the product with a soft, dry cloth.
detergents. These chemicals can damage the appearance of the TV or erase the printing on the product.
CAUTION: There is danger of an explosion if you replace the batteries used in the remote with the wrong type of
battery. Replace only with the same or equivalent type.
Use care when touching the TV after it has been on for some time. Some parts can be warm to the
touch.
English - 4
Contents
Before Reading This Install Guide ---------------------------------------------------------------------------- 2
Warning! Important Safety Instructions ----------------------------------------------------------------------------
01 What's in the Box?
---------------------------------------------------------------------------- 9
Installing the wall mount kit ---------------------------------------------------------------------------- 12
Securing the TV to the Wall ---------------------------------------------------------------------------- 12
----------------------------------------------------------------------------
Providing proper ventilation for your TV ----------------------------------------------------------------------------
02 The Samsung Smart Remote
About the Buttons on the Samsung SolarCell Remote
(Samsung Smart Remote) ---------------------------------------------------------------------------- 14
Pairing the TV to the Samsung Smart Remote ---------------------------------------------------------------------------- 15
Charging the battery ---------------------------------------------------------------------------- 15
03 Controlling external devices with a Samsung Smart Remote - Using
the Universal Remote
Universal Remote icon ---------------------------------------------------------------------------- 18
04 Initial Setup
Using the TV Controller ---------------------------------------------------------------------------- 20
05 The Connection Panel
06 Connections
Connecting to your Internet network ----------------------------------------------------------------------------
Connecting the TV to a SBB or STB ---------------------------------------------------------------------------- 25
Connecting the Bathroom Speakers ---------------------------------------------------------------------------- 26
English - 5
07 Using a TV Viewing Card (“CI or CI+ Card”)
Connecting the “CI or CI+ Card” via COMMON INTERFACE
---------------------------------------------------------------------------- 27
Using the “CI or CI+ Card” ---------------------------------------------------------------------------- 28
08 Setting the Hotel Option menu
----------------------------------------------------------------------------
USB Cloning ----------------------------------------------------------------------------
Settings Cloned in the ----------------------------------------------------------------------------
---------------------------------------------------------------------------- 41
Updating the TV’s Software ---------------------------------------------------------------------------- 46
09 Editing Channels
Using Channel Editor ---------------------------------------------------------------------------- 47
10 Specifications and Other Information
Specifications ---------------------------------------------------------------------------- 50
Environmental Considerations ---------------------------------------------------------------------------- 51
---------------------------------------------------------------------------- 51
---------------------------------------------------------------------------- 52
Supported Resolutions for Connecting a Computer ----------------------------------------------------------------------------
Supported Resolutions for Video Signals ---------------------------------------------------------------------------- 55
Read Before Using the Internet Function ---------------------------------------------------------------------------- 56
---------------------------------------------------------------------------- 57
----------------------------------------------------------------------------
English - 6
01 What's in the Box?
Make sure the following items are included with your TV. If any items are missing, contact your dealer.
Samsung Smart Remote Power Cable Quick Setup Guide / Regulatory Guide
(Not available in some locations)
CI Card Adapter
The items’ colours and shapes may vary depending on the models.
Cables not included can be purchased separately.
Check for any accessories hidden behind or in the packing materials when opening the box.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e., where the user
manual has not been read).
has not been read).
The screen can be damaged from direct pressure when handled
incorrectly. As shown in the figure, make sure to grip the edges
of the screen when you lift the TV.
Do Not Touch
This Screen!
English - 7
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic
accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste
at the end of their working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of waste and recycle them
responsibly to promote the sustainable reuse of material resources.
government office, for details of where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product and its electronic accessories should not be mixed with other commercial wastes
for disposal.
Correct disposal of the batteries in this product
(Applicable in countries with separate collection systems)
This marking on battery, manual or packaging indicates that the batteries in this product should not be
disposed of with other household waste at the end of their working life. Where marked, the chemical
harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types
of waste and recycle them through your local, free battery return system.
WEEE, Batteries, visit
corner.html
English - 8
Installing the LED TV Stand
Assembling the Stand and Components
When installing the stand, use the provided components and parts.
Stand
125 mm
Place a soft cloth over the table to protect the TV, and then place the TV so that its screen faces down toward the
table surface.
English - 9
2
Insert the Stands into the slot on the bottom of the TV.
Slide and assemble it to the end line in the direction of arrow.
English - 10
3
NOTE
Make sure to distinguish between the front and back of each component when assembling them.
Make sure that at least two persons lift and move the TV.
English - 11
Installing the wall mount kit
Wall mount
bracket
TV
C
The wall mount kit (sold separately) allows you to mount the TV on a wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a
technician for assistance when installing the wall mount bracket. Samsung is not responsible for any damage to the
product or injury to yourself or others if you select to install the TV on your own.
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children
do not hang on or destabilise the TV. This action may cause the TV to tip over, causing serious injuries or
death. Follow all safety precautions provided in the Safety Flyer included with your TV. For added stability
and safety, you can purchase and install the anti-fall device.
Preventing the TV from falling
1. Using the appropriate screws, firmly fasten a set of brackets to the wall.
Confirm that the screws are firmly attached to the wall.
–
the type of wall.
2.
TV.
– For the screw specifications, refer to the standard screw part in the
3. Connect the brackets fixed to the TV and the brackets fixed to the wall
with a durable, heavy-duty string, and then tie the string tightly.
– Install the TV near the wall so that it does not fall backwards.
– Connect the string so that the brackets fixed to the wall are at the
same height as or lower than the brackets fixed to the TV.
Wall-anchor
(not supplied)
The product colour and shape may
vary depending on the model.
English - 12
Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor. If you are attaching the wall mount to building
materials other than plaster board, contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall
and cause severe personal injury.
The wall mount kit is not supplied, but sold separately.
NOTE
– Standard dimensions for wall mount kits are shown in the table below.
– Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided.
–
–
specifications. Screws that are too long may cause damage to the inside of the TV set.
– For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on the wall mount specifications.
–
personal injury. Samsung is not liable for these kinds of accidents.
– Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is
used or the consumer fails to follow the product installation instructions.
–
– Always have two people mount the TV onto a wall.
TV size in
inches
VESA screw hole specs
( * ) in millimetres C (mm)Standard Screw Quantity
200 x 200
189.1 168.6
M8 4
50 45 7.0
55 269.4
65 261.9 267.8
75 400 x 400 25 7.4
Do not install your wall mount kit while your TV is turned on. This may result in personal injury from electric
shock.
Providing proper ventilation for your TV
When you install your TV, maintain a distance of at least 10 cm between the TV and other objects (walls, cabinet sides,
etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a problem with the
product caused by an increase in its internal temperature.
When you install your TV with a stand or a wall mount, we strongly recommend you use parts provided by Samsung
only. Using parts provided by another manufacturer may cause difficulties with the product or result in injury
caused by the product falling.
02 The Samsung Smart Remote
About the Buttons on the Samsung SolarCell Remote (Samsung Smart
Remote)
The images, buttons, and functions of the Samsung Smart Remote may differ depending on the model.
The Universal Remote function operates normally only when you use the Samsung Smart Remote that comes with
the TV.
A button without a description in the image below is not supported on the product.
(Power)
Press to turn the TV on or off.
(Colour / Number button)
Each time you press this button, the
coloured buttons window and the virtual
numeric pad are displayed alternately.
Use these coloured buttons to access
additional options specific to the
feature you are using.
Press to bring up the virtual numeric
pad on the screen. Use the numeric
keypad to enter numeric values.
Select numbers and then select
Done to enter a numeric value. Use
to change the channel, enter a PIN,
enter a ZIP code, etc.
When pressed for 1 second or more,
the TTX menu appears.
(Return)
Returns to the previous menu. When
pressed for 1 second or more, the running
function is terminated. When pressed
while you are watching a programme, the
previous channel appears.
(Play/pause)
When pressed, the playback controls
appear. Using these controls, you can
control the media content that is playing.
To use Game Bar, press and hold the
button in Game Mode.
Game Bar may not be supported
depending on the model or
geographical area.
(Smart Hub)
Returns to the .
(Volume)
Move the button up or down to adjust
the volume. To mute the sound, press
the button. When pressed for 1 second or
more, the Accessibility Shortcuts menu
appears.
(Channel)
Move the button up or down to change
the channel. To see the Guide screen,
press the button. When pressed for 1
second or more, the Channel List screen
appears.
Press each button to run its function.
(These buttons may vary depending on
the geographical area.)
Select
Selects or runs a focused item. When
pressed while you are watching a
broadcast programme, detailed
programme information appears.
Directional button (up/down/left/right)
Moves the focus and changes the values
seen on the TV's menu.
(Multi View)
Press the button to enter Multi View
Mode.
English - 14
Pairing the TV to the Samsung Smart Remote
When you turn on the TV for the first time, the Samsung Smart Remote pairs to the TV
automatically. If the Samsung Smart Remote does not pair to the TV automatically,
point it at the remote control sensor of the TV, and then press and hold the buttons
labelled and
more.
Charging the battery
Solar Cell
Expose to light when the remote is not in use. This will extend the remote's
operating time.
USB port (C-type) for charging
The USB Cable is not provided.
– It is recommended to use an original Samsung charger. Otherwise, it may cause performance degradation or failure
of the product. In this case, the warranty service is not applicable.
– When the remote control does not work due to low battery, charge it by using the USB-C type port.
Fire or explosion may occur, resulting in damage to the remote control or personal injury.
Be careful not to let foreign substances such as metal, liquid, or dust come in contact with the charging
terminal of the remote control.
When the remote control is damaged or you smell smoke or burning fumes, immediately stop
operation and then repair it at the Samsung service centre.
Be careful not to let infants or pets suck or bite the remote control. Fire or explosion may occur,
resulting in damage to the remote control or personal injury.
Independently verified!
www.intertek.com/consumer/certified
This product has been independently verified.
TM2180E/F
– Consumes 86% less energy than previous model
TM2180A/B
– Consumes 86% less energy than previous model
– The plastic part of 21 Smart control contains a minimum of 24% post
consumer recycled Poly Ethylene Terephthalate (PET)
NO. : SE-GL-2002861
English - 15
03 Controlling external devices with a Samsung
Smart Remote - Using the Universal Remote
Samsung Smart Remote. To control external devices,
register them by following instructions.
The images on your TV may differ from the images accompanying the instructions depending on the model and
geographical area.
Universal Remote Setup
Select Start to setup your Samsung Smart Remote as a universal remote for easy control of all your devices. Before you start, turn
on the device that you want to add. Also, make sure that the connected device is placed near the TV and there are no obstacles
between the device and remote.
Start Exit
1. Go to the Hotel Option menu, and then select Universal
Remote Setting. The Universal Remote Setup screen appears.
– Hotel Option menu > Universal Remote > Universal
Remote Setting
Select Device Type
Set up a cable or satellite box to control it with your remote.
Home Theater OTT Box/Game C... Blue-ray Disc Pla...Cable/Satellite Box
2. If the TV is connected to a set-top box, select Cable/Satellite
Box.
Select Your TV Service Provider
Select your TV service provider so that you can control your cable or satellite box with
your Smart Remote
Search for your service provider
3. Select your service provider from the list in the screen. If your
service provider is not listed, search manually.
Select TV Input Source
Which port on the TV did you use to connect this cable or satellite box?
HDMI 1
HDMI 2
HDMI 3
HDMI 4
4.
connected.
English - 16
Cable or Satellite Control Test
This test will check if your Samsung Smart Remote can cotrol your cable or satellite box.
During the test, point your remote at your cable or satellite box.
Please check the cable connections, and make sure your devices are turned on.
Did the channel change?
Channel Up
Channel Down
Yes No
5.
instructions on the screen in order to test whether the TV
and the set-box operate correctly when you press the remote
control buttons.
– If the TV and the set-box operate correctly, select Yes. The
setup is completed. Go to step 7.
– If the TV and the set-box do not operate correctly, select
No. Go to step 6.
Search for Model Number
We’re having trouble finding the right device code. Please enter the model number below
to search for your device.
Search model number
Manufacturer : Unkown
SMT-C7140
SMT-C7140
6. Follow the instructions on the screen to search for the model
number of the set-top box connected to the TV. When the
model number is found, repeat step 5 for the operation test.
Setup Complete
Now you can control your connected devices with your Samsung Smart Remote.
Done New Setup
7. When you have completed all the settings, select Done in the
following screen:
This function may not be supported depending on the model or geographical area.
Anynet+ (HDMI-CEC) function to operate external Samsung devices with your TV's remote
control without any additional setup.
Specific external devices connected to the TV may not support the universal remote feature.
control to be transmitted improperly.
English - 17
Downloading the Universal Remote icon
1. Store the following files in the root directory of your USB device:
File name File type File Size
App tile jpg, png 2MB
Source icon jpg, png 66 x 66 to , 2MB
Sources
stb_source_icon.jpg
stb_app_icon.jpg
Source
TV Remote Access
Hotel
Hotel
– The image on your TV may differ from the image above depending on the model and geographical area.
2. Go to the Hotel Option menu, and then select Universal Remote Icon DL.
– Hotel Option menu > Universal Remote > Universal Remote Icon DL
– The Universal Remote Icon DL is only available after you have completely set up the Universal Remote.
English - 18
04 Initial Setup
When you turn on your TV for the first time, it immediately starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your viewing environment.
If you already completed the Initial Setup, run the Initial Setup again using the following menu.
Hotel Option menu > System > TV Reset
If you select TV Reset, the TV resets all values to their factory defaults. When the TV turns off, press the Power button on
the remote control to turn on the TV. The TV starts the Initial Setup.
The Initial Setup steps may differ with the model or geographical area.
1
Select the region settings
Before select region, refer to the country list information on the right.
If you select the incorrect region, execute TV Reset again after the Initial Setup is completed.
If the region is changed, the TV automatically turns off and on.
2
Selecting your TV installation type
Basic TV Setup: Select to proceed to the next step to set the basic options for using your TV.
Cloning Mode: Copy the system settings from the USB or server to the TV.
Factory Menu: End Initial Setup and go to Hotel Option menu directly.
Follow the instructions on the screen to configure the settings for your own viewing environment.
English - 19
Using the TV Controller
TV Controller button at the bottom of the TV, and then use the Control menu. The
Control menu appears when the TV Controller button is pressed while the TV is On. For more information about its
usage, refer to the figure below.
The screen may dim if the protective film on the SAMSUNG logo or the bottom of the TV is not detached. Please
remove the protective film.
Control menu
:Power On/Off :Volume Up
:Channel Up :
: :Source
TV Controller button / Remote control sensor
Short Press: Move
Long Press & Hold: Select
The TV Controller button is located on the bottom of the TV.
English - 20
05 The Connection Panel
O
①
②
④
⑥
⑦
④
⑧⑨
⑤
⑩
③
⑤
When connecting an external device, match the colour of the connection port to the cable.
Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off.
① VARIABLE AUDIO OUT
Used for the audio output to the Bathroom speaker. Connect the Volume Control Box on the Bathroom Wall and
the VARIABLE AUDIO OUT port.
② VOL-CTRL
Used to control the volume of the Bathroom speaker. Connect the Volume Control Box on the Bathroom Wall and
the VOL-CTRL port.
③ USB (5V 0.5A), USB (HDD 5V 1A)
– Connector for software upgrades and Media Play, etc.
– Service connection.
English - 21
④ LAN IN / LAN OUT
⑤ HDMI IN 1, 2 (eARC), 3
–
and video.
–
contact to the Samsung customer care centre.
⑥ SERVICE
Connect this port to the port on the optional RJP (Remote Jack Pack). This will allow you to connect external
⑦ DATA
– Used to support data communication between the TV and the SBB or STB.
– Connects using RJ-12 TV type plugs.
⑧ ANT IN (SATELLITE), (Aerial/CABLE)
To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system / A satellite receiver
⑨ DIGITAL AUDIO OUT (OPTICAL)
⑩ COMMON INTERFACE
Watches paid channels by inserting your TV viewing card (“CI or CI+ Card”) into the COMMON INTERFACE slot.
English - 22
06 Connections
Connecting to your Internet network
wired or wireless connection.
After you have physically connected the TV to your network, you must configure the network connection to
(Hotel Option menu > Network > Network Setup).
Establishing a wireless Internet connection
Connect the TV to the Internet using a wireless access point or modem.
Wireless IP access point or
This TV supports the IEEE 802.11 a /b /g /n /ac communication protocols. Samsung recommends using IEEE
802.11n. Otherwise, when you play video over a network connection, the video may not play smoothly.
– Some of the IEEE 802.11 communication protocols may not be supported depending on the model or
geographical area.
To use a wireless network, the TV must be connected to a wireless access point or modem. If the wireless access
Select a channel that is not currently in use for the wireless access point. If the channel set for the wireless access
point is currently being used by another device, the result is usually interference and/or a communications failure.
Most wireless networks have an optional security system. To enable a wireless network's security system, you need
to create a security key using characters and numbers, and then enter that key into the access point through its
Network Security Protocols
The TV only supports the following wireless network security protocols:
in networks running in the 802.11n mode.
If the wireless access point supports WPS (Wi-Fi Protected Setup), you can connect the TV to your network using PBC
WPA key settings.
Establishing a wired Internet connection
There are three main ways to connect the TV to your network using cable, depending on your network setup. They are
illustrated below:
The Modem Port on
the Wall
Modem Cable (Not Supplied)
TV Rear Panel
External Modem
TV Rear Panel
The Modem Port on
the Wall
Modem Cable
(Not Supplied)
(Not Supplied)
(Not Supplied)
External Modem
IP access point that
TV Rear Panel
The TV will not be able to connect to the Internet if your network speed is below 10 Mbps.
English - 24
Connecting the TV to a SBB or STB
ETH MODEM
TV Rear Panel
STB (SBB)
Connect the DATA port of the TV to the ETH MODEM
The ETH MODEM
IR signals sent by the remote control to the TV or SBB / STB must meet the following specification to use IR pass
through function.
IR signal receiver specification
– Band pass filter centre frequency: ㎑
–
–
– Minimum Gap Time Between the burst (tburst gap): 16 pulses (422 us)
– Minimum Gap Time between the data commands (tpause): 25 ㎳
List of Hospitality SI Vendors and compatible data cables supplied with the TV
Confirm you are using the correct data cable for your SI vendor. Refer to the code label on the data cables.
Contact your nearest dealer or your SI Vendor to buy the data cable not included in the TV.
1
6
1
2
3
4
5
TV side STB (SBB) side
Cable code Pin assign SI Vendor
TV SIDE
1: TX
2: RX
3: IR
4: NC
5: GND
STB (SBB) SIDEP1 P2
31
52
63
14
25
1: NC
2: GND
3: TX
4: NC
5: RX
6: IR
RED
GREEN
WHITE
BLACK
YELLOW
SAMSUNG and
others
RX and TX notation is based on TV.
English - 25
Connecting the Bathroom Speakers
Connecting through the Variable Output (available without an external amplifier)
VOL+
VOL
-
TV Rear Panel
Volume Control Box
Speaker
2
1
The rear panel may differ depending on the model.
1 Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel.
Speaker +
Speaker - N/C
2 Connect the VOL-CTRL port of the TV to the Volume Control Box Switch port on the Bathroom Wall of the hotel.
–
– The VARIABLE AUDIO OUT port supports MONO sound out only.
Installing the Volume Control Box
– If you configure the Volume Control Box as shown in the figure, you can control the volume of the bathroom
speakers.
– The port that connects the Volume Control Box to the TV is a mm normal Phone jack.
– Volume Control Box switch is a Tact switch.
Setting the Sub AMP Mode
– 0: Turns the Sub AMP function off (PWM off).
– 1VARIABLE
AUDIO OUT volume are determined according to the Power On Volume Num, the Min Volume, and the Max
Volume values in the Hotel Option menu.
– 2
VOL-CTRL Port Specifications
– Speaker Wire: Use speaker cable no more than 25 m in length.
Volume Control Box
1)
VOL +
VOL
-
1
2
3
3)
2)
English - 26
07 Using a TV Viewing Card (“CI or CI+ Card”)
Watches paid channels by inserting your TV viewing card (“CI or CI+ Card”) into the COMMON INTERFACE slot.
– The 2 CI card slots may not be supported depending on the model.
– Turn the TV off to connect or disconnect a “CI or CI+ Card”.
– The “CI or CI+ Card” may not supported depending on the model.
Connecting the “CI or CI+ Card” via COMMON INTERFACE slot with the CI
CARD Adapter
Attaching the CI CARD Adapter via COMMON INTERFACE slot
①
– Please locate the two holes at the back of the TV above the
COMMON INTERFACE slot.
② COMMON INTERFACE slot on
the back of TV.
Connecting the “CI or CI+ Card”
Connect the “CI or CI+ Card” to the COMMON INTERFACE slot as shown in the image below.
English - 27
Using the “CI or CI+ Card”
Samsung TV follow up CI+ 1.4 standard. When Samsung TV product display the pop-up message, it may happen due
to CI+ 1.4 Version inconsistency. If you have a problem, please contact Samsung Call Centre.
–
– Where a CI+ Common Interface module is incompatible with Samsung TV then please remove the module and
contact the CI+ operator for assistance.
service provider.
When the configuration of channel information has finished, the message “Updating Completed” is displayed,
indicating the channel list is updated.
–
–
cause damage to it.
–
– The location of the COMMON INTERFACE slot may be different depending on the model.
–
– If you have any problems, please contact a service provider.
–
English - 28
08 Setting the Hotel Option menu
To access the Hotel Option menu, press the following buttons on the Samsung Smart
Remote:
1. Press the button.
2. Press the up directional button.
3. Press the down directional button.
4. Press the Select button.
To control the TV functions in the Hotel Option menu, the TV has the Standalone mode.
SI Vendor: OFF / Movielink / Swisscom / SSCP
After a menu appears, follow these general directions to navigate and change values:
Use the directional buttons on the remote control to move from menu item to menu item.
Press the Select button on the remote control to select a menu item. The screen displays that menu item only.
Press the left or right directional button to change a value. The right directional button increases numerical values.
The left arrow button decreases numerical values.
When the screen is displaying one menu item, you can press the up or down directional button to display the next
or previous menu item.
Press the button to exit the current menu item and go to a higher menu level.
To exit a Hotel Option menu, turn off the TV, and then turn it on again. Any changes you made are saved except
changes to SI (System Integration) vendor. For changes to SI vendor, you must turn the TV off, wait until the power
indicator at the bottom of the TV glows steadily. And then unplug the TV's power cord, wait for the power indicator
to go off, and then plug the TV's power cord in again.
English - 29
Hotel Option menu items
To exit from this menu, turn off (or turn off and unplug the power cable if you have changed SI vendor) the TV, and then
turn on again. Any changes you made are saved.
The menu items may not be supported depending on the model or geographical area.
Hotel Option menu Item Description
Hospitality Mode
Select Hospitality Mode.
Interactive: TV works with an SI STB or SBB.
Standalone: TV works alone, without an SI STB or SBB.
SI Vendor
Interactive:
Standalone: OFF / Movielink / Swisscom / SSCP
SI Config
MDC ID Settings This function is only available when set to Hospitality Mode: Interactive, SI Vender:
MDC.
TV Version This function is only available when set to Hospitality Mode: Interactive, SI Vender:
Magilink.
Power On
Power On Channel
Set the channel to display when the TV is turned on.
User DefinedPower On Channel
Num. See Power On Channel Num below.
Last Saved: If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
Power On Channel Num When the TV is turned on, it switches automatically to this channel.
Power On Channel Type
Select the type of the channel will be displayed when the TV is turned on.
ATV (analog air band), DTV (digital air band), CATV (analog cable band), CDTV (digital
cable band), SDTV (For Satellite Models), IPTV (IP channel, IPTV is set when deployed
from solution.)
Power On Volume
Set volume level when the TV is turned on.
User Defined
Last Saved: When the TV is turned on, it returns to the volume that had been set
when the power had been turned off.
Power On Volume Num The TV turns on with set volume level in Standalone mode.
Min Volume The minimum volume level the user can set in Standalone mode.
Max Volume The maximum volume level the user can set in Standalone mode.
Power On Source Select the input source to be displayed when the TV is turned on.
Power On Option
unplugged the TV and then plugged it in again.
Power ON: When the power returns, the TV turns on.
Standby: When the power returns, the TV enters the standby mode.
Last Option: Returns to its last power state. If it was in standby mode, it returns to
standby mode. If it was on, it turns on.
Hotel Option menu Item Description
Channel
Channel Setup
Gives you direct, immediate access to some of the channel menu functions on the
Broadcasting menu such as Auto Tuning, Programme Rating Lock, Audio Options,
etc.
Channel Editor
Change the channel numbers and names, manage genre and language groups
and delete channels.
Apply the Screen Off to channels you select. The Screen Off blanks out the video
from a channel and outputs only audio.
display each channel directly.
Mixed Channel Map
Enables showing/browsing all antenna type (Aerial/Cable) channels at the same
time.
ON: When set to on, guests can access the complete channel map irrespective of
the selected antenna type. The Channel List/Channel Editor will also populate
Aerial as well Cable type channels.
OFF: When set to off, guest can access the channel map corresponding to the
selected antenna type (Aerial/Cable) only. The Channel List/Channel Editor will
only show the selected antenna type channels.
Dynamic SI ON:
OFF
Channel Rescan Message
When there is a mismatch between the data in the channel map and the transmitted
data, the TV autotunes the channels to restore the data/parameters in the channel
map.
ON: When Channel Rescan Message
channels are being rescanned will be displayed to the guest.
OFF: When Channel Rescan Message
should not to be displayed to the guests.
MyChannel Enable or disable the MyChannel function.
This function is not available when set to Hospitality Mode: Standalone.
Subtitle Auto On
This function turns the function on or off that automatically turns on the subtitles in
a specific country.
heading to Europe.
This function is related to France’s subtitle specification. The rest of the subtitle
functions available according to the country specifications regardless of Subtitle Auto
On function.
ON: When Subtitle Auto On is set to on, it follows France’s subtitle specifications.
OFF: When Subtitle Auto On is set to off, it does not follow France’s subtitle
specifications.
TTX Widescreen Mode ON: TTX should show in
OFF: TTX should show in
Broadcasting Sel
If you change the function value, data in such as the channel list and the channel map
may be reset. In this case, you must run Auto Tuning again.
Hotel Option menu Item Description
Menu OSD
Picture Menu Lock Enable or disable the Picture menu.
Menu Display ON: The main menu is displayed.
OFF: The main menu is not displayed.
Channel Menu Display ON: Broadcasting menu is enable for guest.
OFF: Broadcasting menu is disable for guest.
Panel Button Lock
Turning the TV Controller button operations on or off.
Unlock: Unlocks TV Controller button.
Lock
OnlyPowerpower off function.
Menu/Source
Clock
Local Time
Select the way to update the clock data
Standalone: Manual / Time Channel / TTX
Interactive: Manual / Time Channel / TTX / Auto
– Manual: The clock is set manually by the user when the TV is in Standalone mode.
– Time Channel: The clock is set from the selected channel.
– TTX: Bring up the time information from the TTX stream.
Time Channel Type
Select the type of the channel to update the clock data.
DTV (digital air band), CDTV (digital cable band), SDTV
This function is only available Local Time set to Time Channel.
Time Channel Num Select the number of the channel to update the clock data.
This function is only available Local Time set to Time Channel.
NTP Settings
External
Source USB Pop-up Screen
When USB is connected to the TV :
Default: A popup window appears.
Automatic: This enters the USB content menu automatically.
Disable: Neither the popup window nor the menu appears.
Bathroom
Speaker
Sub Amp Mode
0: Turns the bathroom speaker sound AMP function off (PWM off).
1: The bathroom speaker sound volume follows the TV speaker sound volume
identically. The bathroom speaker sound volume is controlled by the TV remote
control or TV Controller button.
2: The bathroom speaker sound volume is controlled by the bathroom speaker
volume controller.
Sub Amp Volume The initial bathroom speaker sound volume after TV is turned on.
Power and
Energy
Saving
Brightness Reduction ON: Turns on the energy saving function.
OFF: Turns off the energy saving function.
Power Saving Mode Timer This function is only available when set to Hospitality Mode: Interactive, SI Vender:
Magilink.
Hotel Option menu Item Description
Cloning
Clone TV to USB Clone the current TV options to a USB device.
Clone USB to TV Clone the saved TV options on a USB device to the TV.
Setting Auto Initialize If you set Setting Auto Initialize to On, the TV menu items are restored again to their
values cloned initially when the TV turns off and then on.
Smart
Service
Network Setup
Run the Network
following items:
Network Status: View the current network and Internet status.
Open Network Settings: Connect to an available network.
Reset Network: Restore the network settings to the factory default.
Expert Settings: Configure advanced network settings.
Download by App ID
Apps Editable
Provide a way to enable or disable the Apps and Notification Settings menu.
ON: Enable the Apps and Notification Settings menu.
OFFApps and Notification Settings menu.
Ambient Editable
Provide a way to enable or disable the Ambient Settings menu in Ambient Mode.
ON: Enable the Ambient Settings menu.
OFFAmbient Settings menu.
Terms & Policy View the entire text of the Terms & Policy document.
service agreement.
Smart Features
Run the Smart Features menu.
Autorun Smart Hub: If Autorun Smart Hub is set to On, the TV automatically
displays the when you turn on the TV.
Home App Preview Editor
Quick Settings Editor Edit the items to be displayed in Quick Settings and change their order.
Samsung Account Create and manage your own Samsung account.
LAN OUT
network devices.
VLAN ID
Solution VLAN ID
Device LAN ID
connected to the port.
Hotel Option menu Item Description
Universal
Remote
Universal Remote Setting Run the Universal remote setup function.
Universal Remote Type This function is only available when set to Hospitality Mode: Interactive, SI Vender:
Samsung.
Universal Remote Icon DL Universal Remote icons from USB device and applying
downloaded icons to the connected Universal Remote source.
Security
Factory Lock
Hotel Option menu.
ON: The password is needed before entering Hotel Option menu.
OFF
Password Popup
Enable or disable password input popup window. If this option is set to off, the TV will
not display the password input popup window when entering the Hotel Option menu.
If set to ON, the password input popup window appears.
Password Input
If this function is enabled, the password input popup window appears which asks for
an 8-character security password. The admin must enter a password before applying
or updating security preferences. After the correct password is entered, options such
as Password Setting, Password Reset and Security Mode are available.
Password Setting User can change the password.
Password Reset Password is reset to "00000000."
Security Mode
Provides password protected administrative functionality to enable or disable
features of hospitality TV, such as USB, HDMI. To use this option, Security Mode set
to ON. After Security Mode set to ON, options such as USB, HDMI are automatically
enabled.
USB Enable or disable USB access. If this function is set to Disable, access to USB media is
blocked. Clone USB to TV and TV Reset will be disabled in the Hotel Option menu.
HDMI Enable or Disable
TTX Security If this option is set to Disable, the TTX feature will not work even if you press the
button on the Samsung Smart Remote and then select TTX/MIX.
DRM DRM Mode
OFF
LYNK DRM: Select to turn on support only.
Pro:idiom: Select when there are any Pro:Idiom channels.
LYNK DRM, PI: Select when there are LYNK-DRM and Pro:Idiom channels at the
same time.
Hotel Option menu Item Description
System
Self Diagnosis for HTV
Pro:Idiom and its communication with the SI STB or SBB. If
you have any problems with the Pro:idiom encryption channel or the communications
with the SI STB or SBB, use this diagnosis function. If PI DTV Channel Key Loss
(Pro:Idiom DTV Channel Key Loss) appears to have failed and the Pro:Idim encryption
channel has failed to play content, first check the broadcasting systems related to
Pro:Idiom encryption. If your broadcasting system does not have a problem, contact
Samsung Service. If STB SI Vendor Setting appears to have failed and communication
with the SI STB or SBB has failed, first check your SI STB or SBB. If your SI STB or SBB
does not have a problem, contact to Samsung Service.
Self Diagnosis for TV
Run the Device Care menu.
Start Picture Test: Use this test when you experience a problem with your TV's
picture.
Start Sound Test: Use this test when you experience a problem with your TV's
sound.
Signal Information: Show digital broadcasting signal information.
Reset Smart Hub: Reset the and Samsung account settings stored on
your TV.
Reset: Restore all TV settings, excluding network settings, to the factory defaults.
(Not available)
System Manager
Gives you direct, immediate access to System Manager functions such as Time,
Language, Change PIN.
System Manager allow you to adjust your TV's system and customise settings for your
viewing environment.
OTN Update
present on server.
OTN Update changed to ON and disabled when Enrollment Status in LYNK Cloud
is Yes.
SW Update
About This TV
Standby LED
When the TV is in standby mode, you can configure the settings of the power
indicator.
ON
OFF
TV Reset Returns all settings on the TV to their factory defaults.
Hotel Option menu Item Description
LYNK
Cloud
Enrollment LYNK Cloud solution.
Enrollment Status Check the status of the TV enrollment in the LYNK Cloud service.
*Virtual
Standby
Virtual Standby Mode
When the AC power cord is plugged in and the power is off, this option maintains the
TV's important features even after the screen is off.
Electricity consumption may vary depending on the environment.
Reboot Time After the TV power is off (in Virtual Standby Mode) if there is no input from the user
within the set Reboot Time, the TV will reboot and enter Virtual Standby Mode again.
Room Number
H.Browser
Solution
H.Browser Mode H.Browser Mode and run the H.Browser Web App.
H.Browser Vendor H.Browser Vendor.
URL Launcher Setting
H.Browser Solution settings menu
Install Web App: Enter the
xml files are located.
Uninstall
Timeout setting
Developer Mode: If you used for development, you can connect
Enrollment Status in LYNK Cloud is set to ON.
Refer to the manual of each solution for details about functions and settings of the solutions such as .
USB Cloning
Hotel Option menu > Cloning
The USB cloning function lets you download user-configured settings (Picture, Sound, Broadcasting, and Hotel Option
menu) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you
create a standard file of settings and distribute that standard file to all the TVs in your facility.
After cloning, certain features are applied when the TV is turned on again.
Cloning TV to USB: Copies stored menu settings from a TV to a USB device
Hotel Option menu > Cloning > Clone TV to USB
1. Insert a USB device into the USB port on the rear of the TV.
2. Go to the Hotel Option menu.
3. Press the up or down directional button to select Clone TV to USB, and press the Select button on the remote
control.
4. The cloning message is displayed.
– The clone folder will be labelled T-NKLADEUCB.
– The cloned values include the values on the guest side menu (Picture, Sound, Broadcasting and so on) and the
Hotel Option menu.
Cloning USB to TV: Copies menu settings and channel data in a USB device to a TV
Shortcut: Turn the TV off, insert the USB device, turn the TV on, and then press the Select button on the remote control
for 5 seconds.
To clone data to the TV using the Hotel Option menu, follow these steps:
1. Turn the TV off.
2. Insert the USB device into the USB port on the rear of the TV.
3. Turn the TV on.
4. Go to the Hotel Option menu.
5. Press the up or down directional button to select Clone USB to TV, and press the Select button on the remote
control.
6. The message Clone settings from USB to TV is displayed. Press the Select button on the remote control.
– If there is no file to copy on the USB device or the message that there is no file appears, check the folder on your
USB device.
– The folder name should be T-NKLADEUCB.
– Tables that list the settings that are cloned in the Hotel Option menu begin on the next page.
"Turn the TV off, insert the USB device, turn the TV on, and press the Select button on the remote control for 5
seconds, then this menu is displayed.
Pre-condition for cloning (check point)
Cloning should be done between same model (same SW version).
Before cloning, all displays should be updated at the latest version (same SW version).
Settings Cloned in the Hotel Option menu
The menu items may not be supported depending on the models.
Menu Item Sub Item Cloned or not
Standalone / InteractiveStandalone)
SI Vendor
Interactive:
Acentic / Sustinere / Quadriga / ETV / Ibahn / Magilink
Standalone: Off / Movielink / Swisscom / SSCP
SI Config 00 ~ 99
TV Version 1.0 / 2.0
Power On
Power On Channel
Power On Channel Num
Power On Channel Type
Power On Volume
Power On Volume Num 0~100
Min Volume 0~100
Max Volume 0~100
Power On Source
Power On Option
Channel
Channel Setup
Channel Editor
Mixed Channel Map On / Off
On / Off
Channel Rescan Message On / Off
MyChannel On / Off
Subtitle Auto On On / Off
TTX Widescreen Mode On / Off
Broadcasting Sel
On / Off
On / Off
On / Off
Menu Item Sub Item Cloned or not
Clock
Standalone Mode: Manual / Time Channel / TTX
Interactive Mode: Manual / Time Channel / TTX / Auto
Time Channel Type
Time Channel Num
NTP Setting
Network Time
Protocol
Time Zone Select Time Zone
External Source USB Pop-up Screen
Bathroom
Speaker
SubAmp Mode 0~2
SubAmp Volume
Power and
Energy Saving
Brightness Reduction On / Off
Power Saving Mode Timer 0~99
Cloning
Clone TV to USB No
Clone USB to TV No
On / Off
Smart Service
Network Setup No
Apps Editable On / Off
Ambient Editable On / Off
Terms & Policy
Smart Features
Quick Settings Editor
Samsung Account No
On / Off
On / Off
Universal
Remote
Universal Remote Setting No
Universal Remote Type Samsung / SI
Menu Item Sub Item Cloned or not
Security
On / Off
Password Popup On / Off
Password Input No
Password Setting
Password Reset No
Security Mode On / Off
USB
TTX Security
System
STB SI Vendor
Setting "Si Name" Ok / Failure No
No
System Manager No
OTN Update On / Off
SW Update No
Remote Management No
About This TV No
On / Off
TV Reset No
Enrollment No
Enrollment Status No
Virtual Standby Virtual Standby Mode On / Off No
Reboot Time
Room Number No
Solution
On / Off
Others / Sonifi
English - 40
Setting Auto Initialize
OHotel Option menu > Cloning > Setting Auto Initialize
When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings:
Picture, Sound, Broadcasting, and Hotel Option menu. This lets you set nearly all of the menu values on your hospitality
TVs to the same, standard settings. If you allow guests access to the guest side menus, for example the Picture menu,
they can change the settings in those menus so they are no longer standard. If you set the Setting Auto Initialize
when the TV is turned off and then turned on again. Note that Setting Auto Initialize works on cloned guest side menu
values only. Settings which have not been cloned are ignored.
The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize
function to on.
The menu items may not be supported depending on the models.
Menu Item
Picture
Picture Mode
Auto Wide
Fit to Screen
Zoom and Position
Expert Settings
Brightness
Contrast
Sharpness
Colour
Tint (G/R)
Apply Picture Settings
Picture Clarity Settings
Picture Clarity
Judder Reduction
Noise Reduction
Contrast Enhancer
Film Mode
Colour Tone
English - 41
Menu Item
Picture Expert Settings
White Balance
2 Point
R-Gain
G-Gain
B-Gain
R-Offset
G-Offset
B-Offset
Reset
20 Point Settings
20 Point
Interval
Red
Green
Blue
Reset
Gamma
BT.1886
RGB Only Mode
Colour Space Settings
Colour Space
Colour
Red
Green
Blue
Reset
Reset Picture
Sound
Sound Output
Sound Mode
Wi-Fi Speaker Surround Setup
Expert Settings
Balance
Equaliser
Auto Volume
Sound Feedback
Reset Sound
English - 42
Menu Item
Broadcasting
Auto Tuning
Aerial
Common Interface
Service Provider
Settings
Service Provider
About Service Provider
Open Service Provider Settings
Expert Settings Audio Options
Settings
Primary Audio
Secondary Audio
Audio Format
General Accessibility
Voice Guide Settings
Voice Guide
Volume
Speed
Pitch
TV Background Volume
Settings
Subtitle Settings
Subtitle
Subtitle Mode
Settings
Picture Off
Multi-output Audio
Enlarge
Greyscale
Menu Item
General
Accessibility
Colour Inversion
Remote Button Repeat
Settings
Slow Button Repeat
Repeat Interval
Network
Network Status
Open Network Settings
Cast
Reset Network
Expert Settings
Power On with Mobile
IP Remote
Wi-Fi
System Manager
Time
Clock
Clock Mode
Time
Time Offset
Time Zone
GMT
Sleep Timer
Alarm
Samsung Account
Screen Saver
Change PIN
Manager
English - 44
Menu Item
General
Manager
Game Mode Settings Game Mode
Input Signal Plus
Mouse Settings Primary Button
Pointer Speed
Manager
Access Notification
Power and Energy
Saving
Brightness Optimisation
Minimum Brightness
Brightness Reduction
Auto Power Off
Smart Features
Support
Software Update Update now
Remote Management
About This TV
Terms & Privacy Privacy Choices
English - 45
Updating the TV’s Software
the software update. Video and audio settings will be reset to their defaults after a software update. To easily reset the
settings after software update, we recommend you to copy the TV's settings.
For more information about the USB cloning function, refer to page .
Updating through a USB device
To update the TV's software, follow these steps:
1. Insert a USB device containing the software update file into the USB port of the TV.
2. Run SW Update.
– Hotel Option menu > System > SW Update
3. The TV displays a pop-up message that checks for the updated version.
4. Move the focus to OK, and then press the Select button on the remote control.
– Please be careful to not disconnect the power or remove the USB device while upgrades are being applied. The
TV will turn off and turn on automatically after completing the SW upgrade. Please check the SW version after the
upgrades are complete.
English - 46
09 Editing Channels
Using Channel Editor
OHotel Option menu > Channel > Channel Editor
Using Channel Editor you can edit the channels stored in the TV's memory.
Change the channel numbers and names, edit the channel language and channel genre and delete channels.
If you set the Screen Off function to On for the selected channels, a screen off message is displayed, and pictures
are turned off by the Screen Off function and only audio is output from those channels.
Channel Editor also lets you view information about each channel easily, without your having to display each
channel directly.
General Steps for Using the Channel Editor in Standalone Mode
– The image on your TV may differ from the image above depending on the model and geographical area.
1. Run Channel Setup (Channel > Channel Setup) in the Hotel Option menu.
2. Enter Channel Editor (Channel > Channel Editor) in the Hotel Option menu.
3. On a piece of paper, compile a list of channels you want to have, arranged in the order you want.
4.
5. Press the button to exit.
English - 47
Editing the Channel Number
Change the channel number of a channel you select. To change a channel number, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Use the directional buttons on the remote control, move the focus to Edit Channel Number, and press the Select
button.
3. Use the up or down directional buttons on the remote control to change the channel number.
4. Move the focus to OK when done, and then press the Select button on the remote control.
– When you change the channel number, the channel information is updated automatically.
Rename the Channel
Change the name of a channel you select. To change the name of a channel, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Use the directional buttons on the remote control, move the focus to Rename channel, and then press the Select
button.
3. Use the on-screen keyboard that appears to enter the new name for the channel. Use the directional buttons on
the remote control, move the focus a letter or number, and then press the Select button. Repeat for each letter or
number you want to enter.
4. When finished, move the focus to Done, and then press the Select button on the remote control.
English - 48
Assigning the Channel Number to the external device
The external device source of the TV are displayed in the last page of the Channel Editor menu as shown below.
>
1. Select a external device source on the Channel Edit screen.
2. Use the directional buttons on the remote control, move the focus to Edit Channel Number, and press the Select
button.
3. Use the up or down directional buttons on the remote control to assign the channel number.
4. Move the focus to OK when done, and then press the Select button on the remote control.
– Once you assign a channel number to an external device, you can enter the external device without opening the TV
source menu.
English - 49
10 Specifications and Other Information
Specifications
Model Name
Display Resolution
Screen Size
Measured Diagonally
inches
108 cm
50 inches
125 cm
Sound (Output) 20 W20 W
Dimensions (W x H x D)
Body
With stand
965.5 x 559.8 x 25.7 mm
965.5 x 599.8 x 205.6 mm
mm
mm
Weight
Without Stand
With Stand
8.4 kg
8.9 kg
11.5 kg
12.2 kg
Model Name
Display Resolution
Screen Size
Measured Diagonally
55 inches
cm
65 inches
cm
Sound (Output) 20 W20 W
Dimensions (W x H x D)
Body
With stand
mm
mm
mm
1450.9 x 871.0 x 281.8 mm
Weight
Without Stand
With Stand
15.5 kg
16.2 kg
20.9 kg
21.8 kg
Model Name
Display Resolution
Screen Size
Measured Diagonally
75 inches
189 cm
Sound (Output) 20 W
Dimensions (W x H x D)
Body
With stand
mm
mm
Weight
Without Stand
With Stand
kg
kg
English - 50
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10 °C to 40 °C (50 °F to 104 °F)
Notes
This device is a Class B digital apparatus.
The design and specifications are subject to change without prior notice.
For information about the power supply, and more information about power consumption, refer to the label-rating
attached to the product.
the cover terminal.)
Typical power consumption is measured according to IEC 62087.
Recommended hours of use per day of this product is under 8 hours. If the product is used for longer than 8 hours a
day, the warranty may be void.
your product.
Decreasing power consumption
When you shut the TV off, it enters Standby mode. In Standby mode, it continues to draw a small amount of power. To
decrease power consumption, unplug the power cord when you don't intend to use the TV for a long time.
English - 51
Supported Resolutions for UHD Input Signals
If Input Signal Plus is set to Off
Frame rate (fps)
Chroma Sampling
50 / 60 8 bit - - - O
If Input Signal Plus is set to On
Frame rate (fps)
Chroma Sampling
50 / 60
8 bit O O O O
10 bit - - O O
English - 52
Supported Resolutions for Connecting a Computer
When you use your TV as a computer monitor, you can also select one of the standard resolutions listed in the
Resolution column. The TV will automatically adjust to the resolution you choose.
Mode Resolution Display format Horizontal
frequency (KHz)
Vertical
frequency (Hz)
Clock frequency
(MHz)
Polarity
(horizontal /
vertical)
IBM 720 x 400 70 70.087 -/+
MAC
640 x 480 67 66.667 -/-
75 49.726 74.551 57.284 -/-
1152 x 870 75 68.681 75.062 100.000 -/-
VESA DMT
640 x 480 60 59.940 25.175 - / -
640 x 480 72 72.809 - / -
640 x 480 75 75.000 - / -
800 x 600 60 40.000 + / +
800 x 600 72 48.077 72.188 50.000 + / +
800 x 600 75 46.875 75.000 49.500 + / +
1024 x 768 60 60.004 65.000 - / -
1024 x 768 70 56.476 70.069 75.000 - / -
1024 x 768 75 75.029 78.750 + / +
1152 x 864 75 67.500 75.000 108.000 + / +
1280 x 720 60 45.000 60.000 74.250 + / +
1280 x 800 60 49.702 59.810 - / +
1280 x 1024 60 60.020 108.000 + / +
1280 x 1024 75 79.976 75.025 + / +
1440 x 900 60 59.887 106.500 - / +
1600 x 900 60 60.000 60.000 108.000 + / +
1680 x 1050 60 65.290 59.954 146.250 - / +
1920 x 1080 60 67.500 60.000 148.500 + / +
VESA CVT 2560 x 1440 60 88.787 59.951 241.500 + / -
2560 x 1440 120 192.996 119.998 497.750 + / -
Mode Resolution Display format Horizontal
frequency (KHz)
Vertical
frequency (Hz)
Clock frequency
(MHz)
Polarity
(horizontal /
vertical)
CTA-861
1920 x 1080i 50 28.125 50.000 74.250 + / +
1920 x 1080i 60 60.000 74.250 + / +
100 112.500 100.000 297.000 + / +
120 297.000 + / +
67.500 297.000 - / -
60 60.000 594.000 - / -
100 225.000 100.000 1188.000 + / +
120 270.000 120.000 1188.000 + / +
4096 x 2160 24 54.000 24.000 297.000 + / +
4096 x 2160 67.500 297.000 + / +
50 112.500 50.000 594.000 + / +
60 60.000 594.000 + / +
100 225.000 100.000 1188.000 + / +
120 270.000 120.000 1188.000 + / +
24 108.000 24.000 1188.000 + / +
1188.000 + / +
50 220.000 50.000 + / +
60 264.000 60.000 + / +
The interlaced mode is not supported.
The set might operate abnormally if you select a non-standard video format.
Separate and Composite modes are supported. SOG (Sync On Green) is not supported.
Set Apps Editable to ON to change the input source (Edit Name/Icon) manually.
– Hotel Option menu > Smart Service > Apps Editable
English - 54
Supported Resolutions for Video Signals
Check the resolutions supported for video signals.
Mode Resolution Display
format
Horizontal
frequency (KHz)
Vertical frequency
(Hz)
Clock frequency
(MHz)
Polarity (horizontal
/ vertical)
CTA-861
720 (1440) x 576i 50 15.625 50.000 27.000 - / -
720 (1440) x 480i 60 59.940 27.000 - / -
720 x 576 50 50.000 27.000 - / -
720 x 480 60 59.940 27.000 - / -
1280 x 720 50 50.000 74.250 + / +
1280 x 720 60 45.000 60.000 74.250 + / +
1920 x 1080i 50 28.125 50.000 74.250 + / +
1920 x 1080i 60 60.000 74.250 + / +
1920 x 1080 24 27.000 24.000 74.250 + / +
1920 x 1080 25 28.125 25.000 74.250 + / +
1920 x 1080 74.250 + / +
1920 x 1080 50 56.250 50.000 148.500 + / +
100 112.500 100.000 297.000 + / +
120 297.000 + / +
1920 x 1080 60 67.500 60.000 148.500 + / +
24 54.000 24.000 297.000 + / +
25 56.250 25.000 297.000 + / +
67.500 297.000 + / +
50 112.500 50.000 594.000 + / +
60 60.000 594.000 + / +
100 225.000 100.000 1188.000 + / +
120 270.000 120.000 1188.000 + / +
4096 x 2160 24 54.000 24.000 297.000 + / +
4096 x 2160 25 56.250 25.000 297.000 + / +
4096 x 2160 67.500 297.000 + / +
50 112.500 50.000 594.000 + / +
60 60.000 594.000 + / +
100 225.000 100.000 1188.000 + / +
120 270.000 120.000 1188.000 + / +
24 108.000 24.000 1188.000 + / +
1188.000 + / +
50 220.000 50.000 + / +
60 264.000 60.000 + / +
VESA CVT 2560 x 1440 60 88.787 59.951 241.500 + / -
2560 x 1440 120 192.996 119.998 497.750 + / -
Set Apps Editable to ON to change the input source (Edit Name/Icon) manually.
– Hotel Option menu > Smart Service > Apps Editable
English - 55
Read Before Using the Internet Function
Read this information before using the Internet function.
File download is not supported.
The Internet function may not be able to access certain websites, including websites operated by certain
companies.
The TV does not support playback of flash videos.
E-commerce for online purchases is not supported.
ActiveX is not supported.
Only a limited number of fonts are supported. Certain symbols and characters may not be displayed properly.
The response to remote commands and the resulting on-screen display may be delayed while a web page is
loading.
systems.
Copy and paste operations are not supported.
not be available.
The number of windows that can be opened concurrently is limited.
Web browsing speed will differ with the network environment.
Embedded videos in a web page cannot be played at the same time while the PIP (picture-in-picture) function is
operating.
– This function may not be supported depending on the model or geographical area.
Browsing history is saved from latest to oldest, with the oldest entries being overwritten first.
video and
audio files.
Video sources from PC-optimised streaming service providers may not play properly on our proprietary Internet
browser.
English - 56
Dimensions
– The displayed image may differ from your TV, depending on the model.
– .
Front view / Side view
(Unit: mm)
965.5 25.7
205.6
559.8
599.8
(Unit: mm)
1105.8
25.7
228.8
644.5
English - 57
(Unit: mm)
1218.2
25.7
228.8
686.7 708.8
74 7.8
(Unit: mm)
1450.9 25.7
281.8
810.5
871.0
English - 58
(Unit: mm)
1662.2
1676.7 26.6
1005.5
Rear view
(Unit: mm)
189.1
168.6
(Unit: mm)
45 7. 0
English - 59
(Unit: mm)
269.4
(Unit: mm)
261.9
267.8
(Unit: mm)
25 7.4
English - 60
Base Stand detail
(Unit: mm)
211.6
205.6
(Unit: mm)
217.0
228.8
English - 61
(Unit: mm)
217.9
281.8
(Unit: mm)
41.9
English - 62
Licences
CONTENT.
countries.
Open Source License Notice
Open Source used in this product can be found on the following webpage. (https://opensource.samsung.com)
BN81-21582A-01
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the Samsung service centre.
Country Samsung Service Centre Web Site
AUSTRIA 0800 72 67 864 (0800-SAMSUNG) www.samsung.com/at/support
02-201-24-18
BOSNIA www.samsung.com/ba/support
045 620 202 www.samsung.com/al/support
www.samsung.com/bg/support
CROATIA 072 726 786 www.samsung.com/hr/support
800 - SAMSUNG (800-726786)
707 019 70 www.samsung.com/dk/support
www.samsung.com/fi/support
FRANCE www.samsung.com/fr/support
06196 77 555 77 www.samsung.com/de/support
8009 4000 only from landline, toll free
www.samsung.com/gr/support
GREECE 80111-SAMSUNG (80111 726 7864) only from land line
0680SAMSUNG (0680-726-7864) www.samsung.com/hu/support
800-SAMSUNG (800.7267864) www.samsung.com/it/support
www.samsung.com/mk/support
MONTENEGRO 020 405 888 www.samsung.com/support
www.samsung.com/si/support
088 90 90 100 www.samsung.com/nl/support
21629099 www.samsung.com/no/support
www.samsung.com/pl/support
808 207 267 www.samsung.com/pt/support
ROMANIA 0800872678 - Apel gratuit
www.samsung.com/ro/support
SERBIA www.samsung.com/rs/support
www.samsung.com/support
0800 - SAMSUNG (0800-726 786) www.samsung.com/sk/support
SPAIN 91 175 00 15 www.samsung.com/es/support
www.samsung.com/se/support
0800 726 786 www.samsung.com/ch/support (German)
www.samsung.com/uk/support
0818 717100 www.samsung.com/ie/support
8-800-77777 www.samsung.com/lt/support
8000-7267 www.samsung.com/lv/support
ESTONIA 800-7267 www.samsung.com/ee/support
444 77 11 www.samsung.com/tr/support