Table of Contents
- Before Using the Product
- Preparations
- Connecting and using devices
- Using LED Signage Manager
- Player feature
- Picture
- OnScreen Display
- Network
- System
- Support
- Playing photos and videos (Media Play)
- Troubleshooting Guide
- Specifications
- Appendix
Samsung IF015E User Manual
Displayed below is the user manual for IF015E by Samsung which is a product in the Video Wall Displays category. This manual has pages.
Related Manuals
User Manual
© Samsung
Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than Samsung are property of their respective owners.
SNOW-1703U SNOW-1703ULD
IFH (IF015H IF020H IF025H)
IFH-D (IF025H-D IF040H-D IF040H-DL IF060H-D IF060H-DL IF085H-DL)
IFJ (IF012J)
The color and the appearance may differ depending on the product, and the content in the
manual is subject to change without prior notice to improve the performance.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
You will be informed of the administration fee amount before a technician visits.
Table of contents
Before Using the Product
Safety Precautions 6
Safety symbols 6
Electricity and Safety 7
Installation 8
Operation 9
Cleaning 10
Preparations
Parts 11
Front Side (SNOW-1703U / SNOW-1703ULD) 11
Reverse Side (SNOW-1703U / SNOW-1703ULD) 12
Interface Gender Card (I/G Card) 13
Reverse Side (IFH / IFH-D) 14
Reverse Side (IFJ) 15
Remote Control 16
Remote Control (SNOW-1703U / SNOW-1703ULD
model only) 18
Cable Connection 18
Connection 21
Control Codes 23
Connecting and using devices
Before Connecting 26
Pre-connection Checkpoints 26
Connecting to a PC 26
Connection Using an HDMI Cable 26
Connection Using an HDMI-DVI Cable 27
Connection Using an DP Cable 27
Connecting to a Video Device 28
Connection Using an HDMI-DVI Cable 28
Connection Using an HDMI Cable 28
Connecting the LAN Cable 29
SNOW-1703U / SNOW-1703ULD Installation
Precautions 29
Installing the cabinets 30
Removing the protective brackets 30
Replacing the cabinet module 31
Precautions when handling the cabinets 32
Restrictions when installing cabinets 32
Connecting to cabinets 33
Recommended number of devices for connection
for each input voltage 33
Changing the Input source 34
Source 34
Web Browser 35
Settings 35
Refresh Options 37
Using LED Signage Manager
Installing / Uninstalling the software 38
Installing 38
Uninstalling 38
Player feature
Player 39
Viewing content 39
When content is running 40
Available menu 40
File Formats Compatible with Player 41
Schedule 46
Clone Product 47
ID Settings 48
Device ID 48
PC Connection Cable 48
Video Wall 49
Video Wall 49
Horizontal x Vertical 49
Screen Position 49
Format 50
Network Status 51
Picture Mode 52
On/Off Timer 53
On Timer 53
2
Table of contents
Off Timer 54
Holiday Management 54
Ticker 55
URL Launcher 56
URL Launcher Settings 57
Approving a connected device from the server 58
Setting the current time 59
Picture
Picture Mode 60
Contrast / Brightness / Sharpness / Color / Tint
(G/R) 61
Color Temperature 61
White Balance 61
2 Point 61
10 Point 61
Gamma 62
Advanced Settings 62
Dynamic Contrast 62
Black Tone 62
Flesh Tone 62
RGB Only Mode 62
Color Space 62
HDMI UHD Color 62
LED Picture Size 63
Output Resolution 63
LED Picture Size 63
Resolution 63
Fit to screen 63
LED HDR 63
Inverse Tone Mapping 63
Dynamic Peaking 63
Color Mapping 63
Picture Options 64
Color Tone 64
Digital Clean View 64
HDMI Black Level 64
Film Mode 64
Reset Picture 64
OnScreen Display
Screen Protection 65
Auto Protection Time 65
Message Display 66
Source Info 66
No Signal Message 66
MDC Message 66
Download Status Message 66
Language 66
Menu Size 66
Reset OnScreen Display 66
Network
Network Status 67
Open Network Settings 67
Network Settings 68
Server Network Settings 70
Connect to Server 70
MagicInfo Mode 70
Server Access 70
FTP Mode 70
Proxy Server 70
Device Name 70
3
Table of contents
System
Accessibility 71
Menu Transparency 71
High Contrast 71
Enlarge 71
Start Setup 72
Time 72
Clock Set 72
NTP Settings 72
DST 72
Sleep Timer 72
Power On Delay 72
Auto Source Switching 73
Auto Source Switching 73
Primary Source Recovery 73
Primary Source 73
Secondary Source 73
Power Control 73
Auto Power On 73
Max. Power Saving 73
Standby Control 74
Network Standby 74
Power Button 74
Eco Solution 74
Eco Sensor 74
No Signal Power Off 74
Auto Power Off 74
Fan & Temperature 75
Fan Control 75
Temperature Control 75
Input Device Manager 75
Keyboard Language 75
Keyboard Type 75
Input Language Shortcut 75
Play via 75
Change PIN 76
Security 76
Safety Lock On 76
Button Lock 76
USB Auto Play Lock 76
Remote Management 76
General 77
Smart Security 77
Anynet+ (HDMI-CEC) 77
HDMI Hot Plug 79
Custom Logo 79
Game Mode 79
Empty Storage 79
Reset System 79
Support
Software Update 80
Update Now 80
Auto Update 80
Contact Samsung 80
Reset All 80
Playing photos and
videos (Media Play)
Read the following before using media play with
a USB device 81
Using a USB device 83
Features provided in the media content list
page 84
Menu items in the media content list page 85
Available buttons and features during photo
playback 86
Available buttons and features during video
playback 86
4
Table of contents
Troubleshooting Guide
Requirements Before Contacting Samsung
Customer Service Center 87
Testing the Product 87
Checking the Resolution and Frequency 87
Check the followings. 88
Q & A 92
Specifications
General 93
Preset Timing Modes 96
Appendix
Responsibility for the Pay Service (Cost to
Customers) 100
Not a product defect 100
A Product damage caused by customer's fault 100
Others 100
License 101
5
6
Before Using the Product
Chapter 01
Safety Precautions
The following safety instructions are to ensure your personal safety and prevent property
damage. Please read the following to ensure the proper use of the product.
Safety symbols
Symbol Name Meaning
Warning
A serious or fatal injury may result if instructions are not followed.
Caution
Personal injury or damage to properties may result if instructions
are not followed.
Prohibition
Do NOT attempt.
Instruction
Follow directions.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE
ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high
voltage is present inside. It is
dangerous to make any kind of
contact with any internal part of this
product.
AC voltage: Rated voltage marked
with this symbol is AC voltage.
This symbol indicates that this
product has included important
literature concerning operation and
maintenance.
DC voltage: Rated voltage marked
with this symbol is DC voltage.
Class II product: This symbol
indicates that a safety connection
to electrical earth (ground) is not
required.
Caution. Consult instructions for use:
This symbol instructs the user to
consult the user manual for further
safety related information.
7
Electricity and Safety
Warning
Do not use a damaged power cord or plug, or a loose power socket.
•An electric shock or fire may result.
Do not use multiple products with a single power socket.
•Overheated power sockets may cause a fire.
Do not touch the power plug with wet hands. Otherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose.
•An unsecure connection may cause a fire.
Connect the power plug to a grounded power socket (type 1 insulated devices only).
•An electric shock or injury may result.
Do not bend or pull the power cord with force. Be careful not to leave the power cord under a heavy
object.
•Damage to the cord may result in a fire or electric shock.
Do not place the power cord or product near heat sources.
•A fire or electric shock may result.
Clean any dust around the pins of the power plug or the power socket with a dry cloth.
•A fire may result.
Caution
Do not disconnect the power cord while the product is being used.
•The product may become damaged by an electric shock.
Only use the power cord provided with your product by Samsung. Do not use the power cord with
other products.
•A fire or electric shock may result.
Keep the power socket where the power cord is connected unobstructed.
•The power cord must be disconnected to cut off power to the product when an issue occurs.
•Note that the product is not completely powered down by using only the power button on
the remote.
Hold the plug when disconnecting the power cord from the power socket.
•An electric shock or fire may result.
8
Installation
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT
INSTALL THE PRODUCT NEAR HEAT SOURCES.
•A fire may result.
Have a technician install the wall-mount hanger.
•Installation by an unqualified person can result in an injury.
•Only use approved cabinets.
Do not install the product in poorly ventilated spaces such as a bookcase or closet.
•An increased internal temperature may cause a fire.
Install the product at least 10 cm away from the wall to allow ventilation.
•An increased internal temperature may cause a fire.
Keep the plastic packaging out of the reach of children.
•Children may suffocate.
Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.)
•The product may fall and become damaged and/or cause an injury.
•Using the product in an area with excess vibration may damage the product or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or
smoke.
•A fire or electric shock may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a stove.
•The product lifespan may be reduced or a fire may result.
Do not install the product within the reach of young children.
•The product may fall and injure children.
Edible oil, such as soybean oil, can damage or deform the product. Do not install the product in a
kitchen or near a kitchen counter.
Following installation, it is recommended to dehumidify the LED Signage product before use.
•This helps prevent moisture damage and maintain optimal performance.
•For product dehumidification, refer to the supplied installation manual.
The installation manual is available for download at www.samsung.com/displaysolutions.
Caution
Do not drop the product while moving.
•Product failure or personal injury may result.
Do not set down the product on its front.
•The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of
the product is not protruding.
•The product may fall and become damaged and/or cause an injury.
•Install the product only on cabinets or shelves of the right size.
Set down the product gently.
•Product failure or personal injury may result.
Installing the product in an unusual place (a place exposed to a lot of ne dust, chemical
substances, extreme temperatures or a signicant presence of moisture, or a place where
the product will operate continuously for an extended period of time) may seriously affect its
performance.
•Be sure to consult Samsung Customer Service Center if you want to install the product at
such a place.
9
Operation
Warning
There is a high voltage inside the product. Never disassemble, repair or modify the product yourself.
•A fire or electric shock may result.
•Contact Samsung Customer Service Center for repairs.
Before moving the product, turn off the power switch and disconnect the power cable and all other
connected cables.
•Damage to the cord may result in a fire or electric shock.
If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cord
immediately and contact Samsung Customer Service Center.
•An electric shock or fire may result.
If the product is dropped or the outer case is damaged, turn off the power switch and disconnect
the power cord. Then contact Samsung Customer Service Center.
•Continued use can result in a fire or electric shock.
Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product.
During a lightning or thunderstorm, power off the product and remove the power cable.
•A fire or electric shock may result.
Do not drop objects on the product or apply impact.
•A fire or electric shock may result.
Do not move the product by pulling the power cord or any cable.
•Product failure, an electric shock or fire may result from a damaged cable.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area
immediately.
•Sparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cord or any cable.
•Product failure, an electric shock or fire may result from a damaged cable.
Do not use or keep combustible spray or an inammable substance near the product.
•An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
•An increased internal temperature may cause a fire.
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (paper,
matches, etc) into the product (via the vent or input/output ports, etc).
•Be sure to power off the product and disconnect the power cord when water or other foreign
substances have entered the product. Then contact Samsung Customer Service Center.
•Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the
product.
•Be sure to power off the product and disconnect the power cord when water or other foreign
substances have entered the product. Then contact Samsung Customer Service Center.
•Product failure, an electric shock or fire may result.
10
Caution
Disconnect the power cord from the power socket if you do not plan on using the product for an
extended period of time (vacation, etc).
•Dust accumulation combined with heat can cause a fire, electric shock or electric leakage.
Do not put DC power adapters together.
•Otherwise, a fire may result.
Remove the plastic bag from the DC power adapter before you use it.
•Otherwise, a fire may result.
Do not let water enter the DC power device or get the device wet.
•An electric shock or fire may result.
•Avoid using the product outdoors where it can be exposed to rain or snow.
•Be careful not to get the DC power adapter wet when you wash the floor.
Do not put the DC power adapter near to any heating apparatus.
•Otherwise, a fire may result.
Keep the DC power adapter in a well-ventilated area.
If you place the AC/DC power adapter so that it is hanging with the cord input facing upwards,
water or other foreign substances could enter the Adapter and cause the Adapter to malfunction.
Make sure to rest the AC/DC power adapter at on a table or the oor.
The screen is bright. Keep a sufcient distance from the screen.
•Continuously looking at the screen up close is bad for your eyes.
•Keep at least the recommended viewing distance (pixel pitch x 3 m) from the screen.
"e.g. For IF015H: 1.5 x 3 m = a distance of at least 4.5 m is recommended
Do not use humidiers or stoves around the product.
•A fire or electric shock may result.
Do not touch the product if it has been turned on for a long time. The product may be hot.
Store small accessories out of the reach of children.
Do not place heavy objects on the product.
•Product failure or personal injury may result.
Be careful that children do not place the battery in their mouths when removed from the remote
control. Place the battery in a location that children or infants cannot reach.
•If children have had the battery in their mouths, consult your doctor immediately.
When replacing the battery, insert it with the right polarity (+, -).
•Otherwise, the battery may become damaged or it may cause fire, personal injury or
damage due to leakage of the internal liquid.
Use only the specied standardized batteries, and do not use a new battery and a used battery at
the same time.
•Otherwise, the batteries may be damaged or cause fire, personal injury or damage due to a
leakage of the internal liquid.
The batteries (and rechargeable batteries) are not ordinary refuse and must be returned for
recycling purposes. The customer is responsible for returning the used or rechargeable batteries
for recycling.
•The customer can return used or rechargeable batteries to a nearby public recycling center
or to a store selling the same type of the battery or rechargeable battery.
Do not dispose of batteries in a re.
Cleaning
Be careful when touching the LED xture on the front of the product. There is a risk that LED
elements may fall off.
Contact Customer Service Center if the inside of the product needs cleaning (service fee will be
charged).
11
Parts
Front Side (SNOW-1703U / SNOW-1703ULD)
"The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Preparations
Chapter 02
Parts Description
HDBT 4, HDBT 3, HDBT 2,
HDBT 1
View the input HDBT source status.
4 : HDBT 4 / 3 : HDBT 3 / 2 : HDBT 2 / 1 : HDBT 1
LAN
View the input LAN source status.
SOURCE STATUS
View the input source status.
RED : HDMI 1 / GREEN : HDMI 2 / BLUE : DISPLAY PORT
POWER STATUS
View the power status.
RED : OFF / GREEN : ON / BLINKING : STANDBY
Parts Description
P
Turn the product on or off.
IR
Aim the remote control towards this spot on the LCD Display.
"Using other display devices in the same space as the remote
control of this product can cause the other display devices to be
inadvertently controlled.
12
Parts Description
DIGITAL AUDIO OUT(OPTICAL)
Connects to a audio device using the optical(digital) cable.
"Supported models: SNOW-1703ULD
USB ¨
Connect to a USB memory device.
RS232C IN
Used for service purposes.
HDMI IN 1, HDMI IN 2
Connects to a source device using a HDMI cable or HDMI-DVI cable.
DP IN
Connects to a PC using a DP cable.
Parts Description
SERVICE PORT
Dedicated to service technicians.
"This port is for servicing only and has no user function. Do
not connect a cable to this port.
RJ45
Connect to a network using the LAN cable. (10/100 Mbps)
HDBT OUT 1, HDBT OUT 2,
HDBT OUT 3, HDBT OUT 4
Connects to an interface gender. Each port can transmit Full HD
signals. All the four ports must be used to transmit UHD signals.
DC 19V
Connects to the DC power adapter.
Reverse Side (SNOW-1703U / SNOW-1703ULD)
"The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
13
Interface Gender Card (I/G Card)
"The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
ECO SENSOR
Parts Description
DATA IN (Reverse)
Connects to the DATA OUT port on the last cabinet using an OCM cable.
DATA OUT (Forward)
Connects to the DATA IN port on the first cabinet using an OCM cable.
ECO SENSOR
Connects an external IR cable to the ECO SENSOR port.
Automatically recognizes the ambient brightness and adjusts the brightness of the cabinet connected to the I/G card.
To turn off this function, set Eco Sensor to Off at System → Eco Solution.
"Only one external IR cable is provided. The external IR cable operates with only one of multiple I/G cards.
Even if multiple I/G cards are connected, external IR cable operates with only the one I/G card connected at the top.
"After connecting to or disconnecting from the ECO SENSOR port on the I/G card, reboot SNOW-1703ULD.
"Note that the cabinet may be subject to shadows or light interferences depending on the installation position.
"ECO SENSOR is not supported in Live Mode.
"Supported models: SNOW-1703ULD
HDBT IN
Connects to the HDBT OUT port on SNOW-1703U or SNOW-1703ULD using an HDBT cable.
14
Reverse Side (IFH / IFH-D)
"The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
POWER IN DATA IN SERVICE SWITCH DATA OUT
100-240V~50/60Hz 4.0A
POWER OUT
Parts Description
POWER IN
Connects to an AC power.
DATA IN
Connects to the DATA OUT port on an interface gender or on the previous
cabinet to receive video data.
SERVICE
Dedicated to service technicians.
SWITCH
Enters factory mode (press and hold for 5 seconds) or factory reset mode
(press and hold for 10 seconds).
DATA OUT
Connects to the DATA IN port on the next cabinet.
POWER OUT
Connects the power cable to the next cabinet to support AC power.
15
Reverse Side (IFJ)
"The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
POWER OUT
100-240V
50/60Hz 4.0A SERVICE SWITCH SERVICE DATA I N
POWER IN
SERVICE DATA OUT SWITCH SERVICE
Parts Description
SERVICE
Dedicated to service technicians.
DATA OUT
Connects to the DATA IN port on the next cabinet.
SWITCH
Enters factory mode (press and hold for 5 seconds) or factory reset mode
(press and hold for 10 seconds).
POWER OUT
Connects the power cable to the next cabinet to support AC power.
DATA IN
Connects to the DATA OUT port on an interface gender or on the previous
cabinet to receive video data.
POWER IN
Connects to an AC power.
16
"Remote control button functions
may differ for different products.
Remote Control
"Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
"A button without a description in the image below is not supported on the product.
"The FREEZE function is only available for Source.
Power off the product.
Number buttons
Enter the password in the OSD menu.
Turns off the screen only. To turn the screen
back on, press it again.
Player Launch Button.
Display or hide the onscreen display menu, or
return to the previous menu.
Power on the product.
Stop the screen.
Change the input source.
17
Display information about the current input
source.
Move to the upper, lower, left or right menu,
or adjust an option's setting.
Confirm a menu selection.
Exit the current menu.
A: Select the desired screen mode, normal
mode or Live Mode.
"Before changing to Live Mode, set Source
to HDMI 1, HDMI 2 or DisplayPort.
"Live Mode is recommended for live
broadcasts such as sports events and
concerts.
"Note that the product reboots when the
screen mode is changed.
"In Live Mode, only some menus are
supported. Set other settings in normal
mode.
Menus supported in Live Mode: Contrast,
Brightness, Sharpness, Color Temperature,
White Balance (R-Gain / G-Gain / B-Gain),
HDMI Black Level, Reset Picture
B: Manually select a connected input source
from HDMI 1.
C: Manually select a connected input source
from HDMI 2.
D: Manually select a connected input source
from DisplayPort.
POWER ON / POWER OFF
Turn on or off the Smart Signage device.
SOURCE
View or select an external device connected to
the Smart Signage device.
Return to the previous menu.
Used in multimedia mode.
Quickly select frequently used functions.
"Remote control button functions
may differ for different products.
To place batteries in the remote control
Press a button on the remote
control pointing at the sensor on the
front of the product to perform the
corresponding function.
"Using other display devices in the
same space as the remote control
of this product can cause the other
display devices to be inadvertently
controlled.
Use the remote control within 7 m to
10 m from the sensor on the product
at an angle of 30° from the left and
right.
"Store used batteries out of reach of
children and recycle.
"Do not use a new and used battery
together. Replace both batteries at
the same time.
"Remove batteries when the remote
control is not to be used for an
extended period of time.
18
Remote Control (SNOW-1703U / SNOW-
1703ULD model only)
Cable Connection
RS232C Cable
Interface
RS232C (9 pins)
Pin
TxD (No.2), RxD (No.3), GND (No.5)
Bit rate
9600 bps
Data bits
8 bit
Parity
None
Stop bit
1 bit
Flow control
None
Maximum length
15 m (only shielded type)
•Pin assignment
1 2 3 4 5
6 7 8 9
5 4 3 2 1
9 8 7 6
<Male type> <Female type>
Pin Signal
1
Detect data carrier
2
Received data
3
Transmitted data
4
Prepare data terminal
5
Signal ground
Pin Signal
6
Prepare data set
7
Send request
8
Clear to send
9
Ring indicator
19
•RS232C cable
Connector: 9-Pin D-Sub to Stereo Cable
5
16
9
-P2-
1
2
3
-P1-
-P1- -P1- -P2- -P2-
Male type
Rx 3 ---------- 1 Tx STEREO
Tx 2 ---------- 2 Rx PLUG
Gnd 5 ---------- 3 Gnd (3.5ø)
LAN Cable
•Pin assignment
1 2 3 4 5 6 7 8
Pin No Standard Color Signal
1
White and orange TX+
2
Orange TX-
3
White and green RX+
4
Blue NC
5
White and blue NC
6
Green RX-
7
White and brown NC
8
Brown NC
20
•Connector : RJ45
Direct LAN cable (PC to HUB)
RJ45
HUB
P1
P1P2
P2
Signal P1 P2 Signal
TX+ 1↔1TX+
TX- 2↔2TX-
RX+ 3↔3RX+
RX- 6↔6RX-
Cross LAN cable (PC to PC)
RJ45 P1 P2
RJ45
Signal P1 P2 Signal
TX+ 1↔3RX+
TX- 2↔6RX-
RX+ 3↔1TX+
RX- 6↔2TX-
21
Connection
•Connection 1
"Ensure that you connect the RS232C(IN) adapter to the RS232C IN port on the product.
RS232C IN HDBT OUT HDBT IN
DATA OUT (Forward)
DATA IN DATA OUT DATA IN
IFH
RS232C IN HDBT OUT HDBT IN
DATA OUT (Forward)
DATA IN DATA OUT DATA IN
IFH-D
RS232C IN HDBT OUT HDBT IN
DATA OUT (Forward)
DATA IN DATA OUT DATA IN
IFJ
22
•Connection 2
RJ45 HDBT OUT HDBT IN
DATA OUT (Forward)
DATA IN DATA OUT DATA IN
IFH
RJ45 HDBT OUT HDBT IN
DATA OUT (Forward)
DATA IN DATA OUT DATA IN
IFH-D
RJ45 HDBT OUT HDBT IN
DATA OUT (Forward)
DATA IN DATA OUT DATA IN
IFJ
23
Control Codes
Viewing control state (Get control command)
Header Command
ID
Data length
Checksum
0xAA Command type 0
Controlling (Set control command)
Header Command
ID
Data length Data
Checksum
0xAA Command type 1 Value
Command
No. Command type Command Value range
1
Power control 0x11 0~1
2
Input source control 0x14 -
3
Screen mode control 0x18 -
4
Safety Lock 0x5D 0~1
•All communications take place in hexadecimals. The checksum is calculated by adding up
all values except the header. If a checksum adds up to be more than 2 digits as shown below
(11+FF+01+01=112), the first digit is removed.
E.g. Power On & ID=0
Header Command
ID
Data length Data 1
Checksum
0xAA 0x11 1 "Power"
Header Command
ID
Data length Data 1
12
0xAA 0x11 1 1
•To control all devices connected by a serial cable simultaneously irrespective of IDs, set the
ID as "0xFE" and transmit commands. Commands will be executed by each device but ACK
will not respond.
24
Power control
•Function
A product can be powered on and off using a PC.
•Viewing power state (Get Power ON / OFF Status)
Header Command
ID
Data length
Checksum
0xAA 0x11 0
•Setting power ON/Off (Set Power ON / OFF)
Header Command
ID
Data length Data
Checksum
0xAA 0x11 1 "Power"
"Power": Power code to be set on a product.
1: Power ON
0: Power OFF
•Ack
Header Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 'A' 0x11 "Power"
"Power": Power code to be set on a product.
•Nak
Header Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 'N' 0x11 "ERR"
"ERR" : A code showing what error has occurred.
Input source control
•Function
The input source of a product can be changed using a PC.
•Viewing input source state (Get Input Source Status)
Header Command
ID
Data length
Checksum
0xAA 0x14 0
•Setting the input source (Set Input Source)
Header Command
ID
Data length Data
Checksum
0xAA 0x14 1 "Input Source"
"Input Source": An input source code to be set on a product.
0x0C Input source At present, supports only reading the input source status.
0x21 HDMI1
0x23 HDMI2
0x25 DISPLAY PORT
0x60 MagicInfo
0x63 URL Launcher Operates only with URL Launcher.
0x65 Web Browser
"This model does not support HDMI1 and HDMI2.
"MagicInfo is only available with models that contain the MagicInfo function.
25
•Ack
Header Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 'A' 0x14 "Input
Source"
"Input Source": An input source code to be set on a product.
•Nak
Header Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 'N' 0x14 "ERR"
"ERR" : A code showing what error has occurred.
Safety Lock
•Function
PC can be used to turn the Safety Lock On function on or off on a product.
This control is available regardless of whether or not the power is turned on.
•Viewing the safety lock state (Get Safety Lock Status)
Header Command
ID
Data length
Checksum
0xAA 0x5D 0
•Enabling or disabling safety lock (Set Safety Lock Enable / Disable)
Header Command
ID
Data length Data
Checksum
0xAA 0x5D 1 "Safety Lock"
"Safety Lock": Safety lock code to be set on a product
1: ON
0: OFF
•Ack
Header Command
ID
Data
length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 'A' 0x5D "Safety Lock"
"Safety Lock": Safety lock code to be set on a product
•Nak
Header Command
ID
Data
length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 'N' 0x5D "ERR"
"ERR": A code showing what error has occurred
26
Connecting and using devices
Chapter 03
Before Connecting
Pre-connection Checkpoints
"Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
"Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
"Check the types of ports at the back of the product you want to connect.
Connecting to a PC
•Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•A PC can be connected to the product in a variety of ways.
Select a connection method suitable for your PC.
"Connecting parts may differ in different products.
Connection Using an HDMI Cable
HDMI IN 1, HDMI IN 2
27
Connection Using an HDMI-DVI Cable
HDMI IN 1, HDMI IN 2
Connection Using an DP Cable
DP IN
•Precautions for using DP
"To increase the standby power capacity, the product stops DP communication when it is
turned off or in power-saving mode.
If the product in dual monitor mode is turned off or goes into power-saving mode,
monitor setting changes may not be updated. As a result, screen output may not be
displayed properly.
In the occurrence of this issue, set Max. Power Saving to Off before using the product.
"Some graphics cards that are not compliant with the DP standard may prevent the
Windows Booting/Bios screen from being displayed when the product is in power-saving
mode. If this is the case, make sure to turn on the product first before turning on your
PC.
"The DisplayPort interface (DP IN) on the product and the provided DP cable are designed
based on the VESA standards. Using a DP cable that is not VESA compliant may cause
the product to function improperly. Samsung shall not be held responsible for any issues
from using a cable that is not VESA compliant.
Make sure to use a DP cable that is VESA compliant.
28
Connecting to a Video Device
•Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•You can connect a video device to the product using a cable.
"Connecting parts may differ in different products.
"Press the SOURCE button on the remote control to change the source.
Connection Using an HDMI-DVI Cable
HDMI IN 1, HDMI IN 2
Connection Using an HDMI Cable
Using an HDMI cable or HDMI to DVI Cable
•For better picture and audio quality, connect to a digital device using an HDMI cable.
•If the product is connected to an external device that is compatible with an older HDMI
version, the product may not display screen colors properly. It may also display a blank
screen.
If such a problem occurs, ask the manufacturer of the external device about the HDMI
version and, if out of date, request an upgrade.
•Be sure to use an HDMI cable with a thickness of 14 mm or less.
•Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a
connection error may occur.
•A basic high-speed HDMI cable or one with ethernet is recommended.
This product does not support the ethernet function via HDMI.
HDMI IN 1, HDMI IN 2
29
Connecting the LAN Cable
"Connecting parts may differ in different products.
RJ45
•Use Cat7(*STP Type) cable for the connection.
*STP: Shielded Twisted Pair
"Connect to a HUB or router that supports the DHCP function.
SNOW-1703U / SNOW-1703ULD Installation
Precautions
Do not install the product on its side or upside down.
When stacking, keep the vertical distance between products at least 10 mm.
When installing on a wall, keep all distances between the wall and the top, bottom, left, right
sides of the product at least 10 mm, and also keep the distance between the wall and the ports
on the back of the product at least 50 mm for cable connection.
Make sure that the ambient temperature inside the rack mount does not exceed 35°C.
When installing the product, do not block the air vent on the top to prevent the product from
overheating.
Air vent
30
Installing the cabinets
Install the cabinet using the frame kit provided by the manufacturer.
For more information about how to install the frame kit, refer to the user manual that comes
with it.
Samsung shall not be liable for any damage to the product and any injury to the users or others
that may be incurred while the users install the product by themselves.
"The color and shape of parts may differ from what is shown. Specifications are subject to
change without notice to improve quality.
Removing the protective brackets
IFH
IFH-D
IFJ
31
Replacing the cabinet module
IFH
1
UNLOCK
UNLOCK
LOCK
5
UNLOCK
26
3
LOCK
4
LOCK
IFH-D
1
UNLOCK
UNLOCK
5
LOCK
LOCK
UNLOCK
26
LOCK
3
LOCK
7
48
IFJ
15
22 6
3
4
32
Precautions when handling the cabinets
[Caution to prevent external shock and dropping of the
product]
After removing the protective brackets, be careful not
to expose the product to external shocks or vibrations.
Make sure that the product is not dropped from any
height.
Be careful not to expose the product to vibrations or
external shocks when it is lying flat on the floor.
[Caution to prevent damage to corners]
Take extra care to ensure that the corners of a cabinet
do not get damaged.
After removing the protective brackets, do not place
the product on the floor with the LED facing down.
[Caution to prevent damage to the LED from static]
Do not touch the product without anti-static gloves.
Restrictions when installing cabinets
One SNOW-1703U or SNOW-1703ULD supports up to UHD resolution because it has four built-in
HDBT OUT ports.
Up to 224 cabinets can be connected to 1 HDBT OUT port.
"IF085H-DL does not support UHD resolution.
Cabinet installation guidelines by resolution
Resolution 3840 x
2160
1960 x
1092
1920 x
1080
1920 x
1440
1200 x
1080
800 x
600
IF015H
12 x 6 - 6 x 3 - - -
IF020H
16 x 8 - 8 x 4 - - -
IF025H
20 x 10 - 10 x 5 - - -
IF025H-D
- - - 10 x 5 - -
IF040H-D,
IF040H-DL
32 x 12 - 16 x 6 - 10 x 6 -
IF060H-D,
IF060H-DL
48 x 18 - 24 x 9 - - 10 x 5
IF085H-DL
-35 x 13 - - - -
IF012J
6 x 6 - 3 x 3 - - -
To enjoy resolutions that exceed UHD resolution, you need to add SNOW-1703Us or SNOW-
1703ULDs to the configuration.
33
Connecting to cabinets
"Connect SNOW-1703U or SNOW-1703ULD to an external device, and then connect it to IFH,
IFH-D, and IFJ devices.
IFJ supports only SNOW-1703ULD.
"Connecting parts may differ in different products.
•Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•Before connecting power to the cabinets, connect the I/G card to the cabinets first.
•One SNOW-1703U or SNOW-1703ULD supports only one type of LED pitch cabinets. Do not
connect different types of LED pitch cabinets.
"Connecting other types of cabinets may cause abnormal image quality.
•After connecting the HDBT cable, connect the OCM cable in the following order:
HDBT OUT HDBT IN
DATA OUT (Forward)
DATA IN DATA OUT
DATA IN (Reverse)
DATA IN DATA OUT
First cabinet
Connecting cables for redundancy
Last cabinet
SNOW-1703U /
SNOW-1703ULD I/G Card
•Use a CAT 6 (*STP type) cable or later cable standards for connecting components.
*STP: Shielded Twisted Pair
"Make sure that the HDBT cable length is from 15 m to 100 m.
"If you use a cable that is out of specified length range, the signal quality may be unstable.
•Use the LAN cables recommended on the HDBaseT website (http://hdbaset.org/hdbaset-
recommended-cables).
"If a LAN cable that is not recommended is used, the HDBT signals may become unstable.
Recommended number of devices for connection for
each input voltage
Exceeding the recommended maximum number of devices may produce overvoltage, causing
the circuit breaker to trip down or the product to be damaged. Make sure that the number of
connected devices does not exceed the recommended maximum number.
Samsung is not liable for any problems incurred by connecting devices that exceed the
recommended maximum number.
Model Name Operating
voltage
Recommended maximum
number of connections
IFH (IF015H / IF020H)
IFH-D (IF025H-D / IF040H-D / IF040H-DL /
IF060H-D / IF060H-DL / IF085H-DL)
110 V 3 cabinets or less
220 V 4 cabinets or less
IFH (IF025H)
110 V 4 cabinets or less
220 V 8 cabinets or less
IFJ (IF012J)
110 V 2 cabinets or less
220 V 4 cabinets or less
e.g. IFH-D
POWER IN POWER OUT POWER IN POWER OUT POWER IN POWER OUT
First cabinet Second cabinet Last cabinet
Do not use
34
Changing the Input source
Source
sSOURCE → Source
Source
DisplayPort
Web Browser HDMI 1 HDMI 2MagicInfo S
"The displayed image may differ depending on the model.
Source allows you to select a variety of sources and change source device names.
You can display the screen of a source device connected to the product. Select a source from source list to display
the screen of the selected source.
"The input source can also be changed by using the SOURCE button on the remote control.
"The screen may not display correctly if an incorrect source is selected for the source device you want to convert
to.
Edit
sSOURCE → Source → u → Edit → E
Edit the name and device type of a connected external device.
•The list can include the following source devices. Source devices on the list differ depending on the selected
source.
HDMI 1 / HDMI 2 / DisplayPort / Cable Box / Game Console / PC / Blu-ray player
•You cannot edit the following sources.
MagicInfo S / URL Launcher / Web Browser
Information
INFO
You can see detailed information about the selected external device.
35
Web Browser
sSOURCE → Source → Web Browser → E
Web Browser
"The displayed image may differ depending on the model.
"Connect a LAN cable to access Internet from the product, similar to accessing the
Internet from a computer.
Settings
sSOURCE → Source → Web Browser → u → Settings → E
General
Hide Tabs and Toolbar automatically
If the browser tabs, menu or toolbar are not used for a while, they will automatically disappear. To make them
appear again, move the pointer or focus to the top of the screen.
•Use / Do not use
Pop-up Blocker
Make your browsing experience more pleasant by blocking pop-up windows.
•Use / Do not use
Reset Settings
All your customized web browser settings will be reset to their default values. Your bookmarks and history won't be
affected.
Search Engine
If you enter a keyword in the URL/keyword input field, Web Browser will open the Search Results page.
Choose the search engine you want to use.
•Google / Bing
36
Privacy & Security
Security Mode
Provide warnings about unsafe pages or block access to enhance Web Browser security.
This may slow the Web Browser down.
•Use / Do not use
Private Browsing
When Private Browsing is active, your browsing history won't be recorded.
•Use / Do not use
Do Not Track
Ask websites not to track you.
•Use / Do not use
JavaScript
Allow all sites to run JavaScript for a better browsing experience.
•Use / Do not use
Clear History
Clear your entire browsing history.
Delete browsing data
Delete all browsing data such as cookies, cached images and data.
Your Bookmarks and History won't be affected.
Blocked pages
Blocked pages
Block access to pages that you have listed in Blocked pages.
•Use / Do not use
List of Blocked Pages
Block or unblock specific pages.
•Add
Approved pages
Approved pages
Enable web access only to pages that you have approved.
•Use / Do not use
Password for Approved pages
Set a password for managing Approved pages.
•Set Password
List of Approved Pages
Approve specific pages or remove them from Approved pages.
•Add
37
Encoding
Encoding
Choose an encoding method for web pages. The current setting is Auto.
•Auto / Manual (Current : Unicode)
About
Display the current version of Web Browser.
Refresh Options
sSOURCE → Source → Web Browser → u → Refresh Options → E
Refresh Interval
Set the time for the web browser to wait before returning to the home page.
•Off / 5 min / 10 min / 15 min / 30 min
Zoom
Set the zoom scale to apply when the web browser is refreshed.
•50% / 75% / 100% / 125% / 150% / 200% / 300%
Home Page
Set the website to display when the web browser is refreshed.
•Samsung Display / Custom
Custom
Enter the URL to set as the home page.
•Enter URL
"Available only when Home Page is set to Custom.
Read Before Using the Web Browser Function
Read this information before using the Web Browser function.
•File download is not supported.
•The Web Browser function may not be able to access certain websites, including websites
operated by certain companies.
•The product does not support playback of flash videos.
•E-commerce for online purchases is not supported.
•ActiveX is not supported.
•Only a limited number of fonts are supported. Certain symbols and characters may not be
displayed properly.
•The response to remote commands and the resulting on-screen display may be delayed
while a web page is loading.
•Loading a web page may be delayed or suspended completely depending on the status of
the participating systems.
•Copy and paste operations are not supported.
•When composing an email or a simple message, certain functions such as the font size and
color selection may not be available.
•There is a limit to the number of bookmarks and the size of the log file that can be saved.
•The number of windows that can be opened concurrently is limited.
•Web browsing speed will differ with the network environment.
•Browsing history is saved from latest to oldest, with the oldest entries being overwritten
first.
•Depending on the types of video/audio codecs supported, you may not be able to play
certain HTML5 video and audio files.
•Video sources from PC-optimized streaming service providers may not play properly on our
proprietary Web Browser browser.
38
Using LED Signage Manager
"The installation process for LED Signage Manager may be affected by the graphics card,
motherboard, and network environment.
"Make sure that Windows 7 or higher and Microsoft .NET Framework 4.5 are installed on the
computer, before installing LED Signage Manager.
Installing / Uninstalling the software
Installing
1
Run the LED Signage Manager installation file.
2
When the installation window appears, read the instructions and click Next.
3
Agree to the license agreement and click Yes.
4
Set the installation folder and click Next.
– If an installation folder is not specified, the software will be installed in the default
folder.
5
Check that the user information and installation folder have been correctly configured.
Click Next.
6
After installation is complete, click Finish.
– To start LSM immediately, select the Launch LED Signage Manager checkbox.
– After the software is installed, the shortcut icon is created on the desktop.
– The shortcut icon may not appear, depending on the computer system and product
specifications. If the shortcut icon does not appear, press the F5 key.
Uninstalling
If there is an issue with the software, follow the steps below to uninstall the software.
"The uninstall process may vary, depending on the computer operating system. This user
guide assumes that Windows 7 is used.
1
Select Start > Control Panel > Programs and Features.
2
From the list, select LED Signage Manager and click Uninstall.
3
When the delete confirmation dialog box appears, click Yes.
4
After uninstallation is complete, click Finish.
The LED Signage Manager software allows you to easily control multiple display devices from your computer.
For details on how to use the LED Signage Manager software, refer to the Help after installing the software. The LED Signage Manager software is available on the website.
Chapter 04
39
Player feature
Player
→ Player → E
Play a range of content such as channels with schedules assigned, templates or files.
Used
199.33 MB
Available
4.26 GB(95%)
1
2
3
4
5 6
Player
Filter By: All Options
No channel.
Network Channel
Network File
My Templates
Internal Memory
"The displayed image may differ depending on the model.
"To use the Player feature, set Play via to MagicInfo in System.
No. Description
1
Select between internal or external memory.
2
Play content, templates and schedules configured on the server.
•You can view whether the server is connected (approval) in the Player screen.
To view whether the server is connected when a Network Channel is running,
press INFO on the remote.
1
Select Network Channel from the Player screen. The No channel. message
appears if no channel has been registered in Network Channel.
2
Network Channel will run.
3
Play content stored on the server.
4
Play a template stored in the internal memory.
5
Select a content type as criterion to search for a desired content list.
6
Set different options for Player.
Viewing content
1
Select either internal or external memory. The files saved in the selected memory appear.
2
Select the desired file. The content appears on the screen. (For more information on
compatible file formats, see the “File formats compatible with Player” section.)
Accessible using the button on the remote control.
Chapter 05
40
When content is running
Control buttons on the remote
You can use buttons on your remote control to play, pause, or skip between content on the
playlist.
Button Function
TOOLS Brings up the menu bar.
INFO Displays the information of the content.
►Goes to next file or page.
◄Goes to previous file or page.
E / ∆ / ³Plays or pauses slide show or video content.
´Stops displaying content and goes to the Player screen.
πRewinds the video content.
µFast forwards the video content.
Available menu
Press the TOOLS button on the remote control during content playback to configure settings.
Menu Description
Playlist View a list of content items currently playing.
Channel List Network Channel / Internal Channel / USB
Picture Mode Customizes the screen settings for the content currently playing.
Repeat Set the repeat mode.
41
File Formats Compatible with Player
•Supported file systems include FAT32 and NTFS.
•A file with a vertical and horizontal resolution larger than the maximum resolution cannot
be played.
Check the vertical and horizontal resolution of the file.
•Check supported video codec types and versions.
•Check the supported file versions.
– PowerPoint version up to 97 – 2007 is supported
•Only the last USB device that was connected is recognized.
Network Schedule Multiframe
Playback restrictions
•A maximum of two video files (Video) can be played simultaneously.
•In portrait playback mode, only one video file can be played at a time.
•For Office files (PPT and Word files) and PDF files, only one file type is supported at a time.
•LFD(.lfd) files are not supported.
Template les and LFD(.lfd) les
Restrictions
•Ensure a distributed folder (content / schedules) exists in Internal Memory / USB memory.
Playback restrictions
•A maximum of two video (Video) files can be played.
•For Office files (PPT and Word files) and PDF files, only one file type is supported at a time.
•Multiple videos (Video) cannot be played on a single display of a video wall simultaneously.
42
Contents
File Extension Container Video Codec Resolution Frame rate
(fps)
Bit rate
(Mbps)
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.mov
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.flv
*.vob
*.svi
*.m2ts
*.mts
AVI
MKV
ASF
MP4
3GP
MOV
FLV
VRO
VOB
PS
TS
SVAF
H.264 BP/MP/HP
4096 x 2160
4096 x 2160: 24
3840 x 2160: 30 40
HEVC (H.265 - Main, Main10, Main4:2:2 10) 60 80
Motion JPEG 30 80
MVC
1920 x 1080
60 20
MPEG4 SP/ASP
Window Media Video v9 (VC1)
MPEG2
MPEG1
Microsoft MPEG-4 v1, v2, v3
30 20
Window Media Video v7(WMV1), v8(WMV2)
H 263 Sorenson
VP6
*.webm WebM
VP8 1920 x 1080 90 20
VP9 4096 x 2160 4096 x 2160: 24
3840 x 2160: 30 20
*.rmvb RMVB RV8/9/10 (RV30/40) 1920 x 1080 60 20
43
Video Image
•3D video is not supported.
•Content with a resolution larger than the resolution specified in the table above is not
supported.
•Video content with a Bit rate or Frame rate larger than the rate specified in the table above
can cause choppy video during playback.
•Video content will not play, or not play correctly, if there is an error in the content or the
container.
•Some USB/digital camera devices may not be compatible with the player.
•Supports up to H.264, Level 4.1
•H.264 FMO / ASO / RS, VC1 SP / AP L4 and AVCHD are not supported.
•For all Video codecs except MVC, VP8, VP6:
– Below 1280 x 720: 60 frame max
– Above 1280 x 720: 30 frame max
•GMC 2 or higher is not supported.
•Supports only BD MVC Spec.
•Only one video file can play at a time if video files on the monitor use incompatible codecs or
the resolution is 1080 x 1920.
•When a single video file is playing, Seamless mode is not supported under the following
conditions:
– Incompatible codec (MVC, VP3, MJPEG) ↔ Incompatible codec
– Incompatible codec ↔ Compatible codec
– The resolution is different from that of the monitor
– The frequency is different from that of the monitor
•Compatible image file format : JPEG, PNG, BMP
"32-bit, 24-bit and 8-bit BMP files are supported.
•Supported maximum resolution : 4096 x 4096
•Supported maximum file size: 20MB
•Supported image effects : 9 effects
(Fade1, Fade2, Blind, Spiral, Checker, Linear, Stairs, Wipe, Random)
44
Power Point PDF WORD
•Compatible document file formats
– Extension : ppt, pptx
– Version : Office 97 ~ Office 2007
•Functions not supported
– Animation effect
– 3D shapes (which will be displayed in 2D)
– Header and footer (some subitems are not supported)
– Word Art
– Align
A group alignment error may occur
– Office 2007
SmartArt is not fully supported. 97 out of 115 subitems
are supported.
– Object insertion
– Half-width characters
– Letter spacing
– Charts
– Vertical text
Some subitems are not supported
– Slide notes and handout
•Compatible document file formats
– Extension : pdf
•Functions not supported
– Content less than 1 pixel not supported because of
performance degradation issue.
– Masked Image, Tiled Image content not supported.
– Content with Rotated Text, not supported.
– 3D Shadow Effects not supported.
– Some characters not supported
(Special characters may be corrupted)
•Compatible document file formats
– Extension : .doc, .docx
– Version : Office 97 ~ Office 2007
•Functions not supported
– Page background effect
– Some paragraph styles
– Word Art
– Align
A group alignment error may occur
– 3D shapes (which will be displayed in 2D)
– Office 2007
SmartArt is not fully supported. 97 out of 115 subitems
are supported.
– Charts
– Half-width characters
– Letter spacing
– Vertical text
Some subitems are not supported
– Slide notes and handout
45
Template les LFD
•Creation/editing/playback are only available in My
Templates.
•Supported in Network Channel
•Compatible document file formats
– Extension : .lfd
46
Schedule
→ Schedule → E
AM
PM
AM
Sun Mon Tue Wed Thu Fri Sat
1
2
3
Schedule
All Day All Day All Day All Day All Day
Network
Information
Location:
Internal Memory
Date:
**-**-**** ~
**-**-****
Repeat:
Daily
Time:
All Day
Connected
"The displayed image may differ depending on the model.
You can check the content’s playback schedule on the server, imported from an external
storage, or on a mobile device.
No. Description
1
Select between server and external memory.
2
View weekly schedule of content playback.
Select to view detailed information of each event.
3
View a thumbnail image and brief information of the content.
47
Clone Product
→ Clone Product → E
Clone Product
MENU
"The displayed image may differ depending on the model.
Export settings on the product to an external storage device. You can also import settings from an external storage
device.
This option is useful when assigning the same settings to several products.
When a duplicate le is not found on the external storage device
1
Connect the external storage device, then run the Clone Product function.
2
The No cloning file found on the external storage device. Export this device's settings to the external storage
device? message appears.
When a duplicate le is found on the external storage device
1
Connect the external storage device, then run the Clone Product function.
2
The Cloning file found. Please select an option. message appears.
Run the Clone from external storage device or Clone to external storage device function.
– Clone from external storage device: Copy settings saved on an external storage device to the product.
– Clone to external storage device: Copy settings on the product to an external storage device.
"After configuration is complete, the product is rebooted automatically.
48
ID Settings
→ ID Settings → E
ID Settings
"The displayed image may differ depending on the model.
Assign an ID to a set.
Device ID
Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224)
"Press u/d to select a number, and press E.
"Enter the number you want using the number buttons on the remote control.
PC Connection Cable
Select a method to connect to MDC to receive the MDC signal.
•RS232C cable
Communicates with the MDC via a RS232C cable.
•RJ-45 (LAN)/Wi-Fi Network
Communicate with MDC via the RJ45 cable.
49
Video Wall
→ Video Wall → E
Video Wall
"The displayed image may differ depending on the model.
"For the supported resolutions, refer to the S-Box Group Supported items in the
Standard Signal Modes table on page 96.
"The S-Box Grouping function is not supported when Picture → LED Picture Size →
Output Resolution is set to FHD.
Customize the layout of multiple S-boxes that are connected to form a LED display.
In addition, display part of a whole picture or repeat the same picture on each of the connected multiple S-boxes.
To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the
MagicInfo function.
Video Wall
You can activate or deactivate Video Wall.
When using multiple S-Boxes, you can set Video Wall to On to synchronize and display the S-Box outputs as a single
content.
•Off / On
Horizontal x Vertical
This feature automatically splits a display based on a videowall matrix configuration.
Enter the videowall matrix.
The display is split based on the configured matrix. The number of vertical or horizontal S-boxes can be set within
the range of 1 to 15.
"A display can be split into a maximum of 100 screens.
"The Horizontal x Vertical option is only enabled when Video Wall is set to On.
Screen Position
To rearrange split screens, adjust the number for each product in the matrix using the Screen Position feature.
Selecting Screen Position will display the videowall matrix with the numbers assigned to the products that form
the videowall.
To rearrange products, use the direction buttons on the remote control to move a product to another desired
number. Press the E button.
"Screen Position allows you to split the screen into a maximum of 100 views (15 x 15).
"The Screen Position option is only enabled when Video Wall is set to On.
"To use the function, make sure Horizontal x Vertical is configured.
50
Format
Select how to display images on the LED display.
•Full: Display images in full screen with no margin.
•Natural: Display images in the original aspect ratio without enlarging or reducing the size.
"The Format option is only enabled when Video Wall is set to On.
51
Network Status
→ Network Status → E
Network Status
"The displayed image may differ depending on the model.
Check the current network and Internet connection.
52
Picture Mode
→ Picture Mode → E
Picture Mode
"The displayed image may differ depending on the model.
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
Video/Image mode improves the picture quality of the video device. Text mode improves the picture quality of the
computer.
•Shop & Mall
Suitable for shopping malls.
– Select either Video/Image or Text depending on the picture mode.
•Office & School
Suitable for offices and schools.
– Select either Video/Image or Text depending on the picture mode.
•Terminal & Station
Suitable for bus terminals and train stations.
– Select either Video/Image or Text depending on the picture mode.
•Video Wall
Suitable for environments where videowall display are used.
– Select either Video/Image or Text depending on the picture mode.
•Calibration
In this mode, the brightness, color, gamma and uniformity settings customized using the color calibration
program Color Expert are applied.
– To apply the Calibration mode properly, make sure you configure the picture quality settings, such as
brightness, color, gamma and uniformity, using the color calibration program Color Expert.
– To download the Color Expert program, visit www.samsung.com/displaysolutions.
53
On/Off Timer
→ On/Off Timer → E
On/Off Timer
"The displayed image may differ depending on the model.
"You must set Clock Set before you can use this feature.
On Timer
Set On Timer so that your product turns on automatically at a time and on a day of your choosing.
The product turns on according to the settings of the specified input source.
On Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the current time
first.
(On Timer 1 ~ On Timer 7)
•Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose the days you want On Timer to turn on your product.
– The check mark indicates days you’ve selected.
•Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use
the left and right arrow buttons to change entry fields.
•Source: Select the input source of your choice.
•Content (when the Source is set to Internal/USB): From the connected USB device or the internal memory
device, select a folder containing the video or photo file that will be played when the product turns on.
"This function is available only when a USB device is connected.
"If there is only one photo file in the USB, the Slide Show will not play.
"If a folder name is too long, the folder cannot be selected.
"Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the
folders assigned to each USB have different names.
"We recommend that you use a USB memory stick and a multi card reader when using On Timer.
"The On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by
some manufacturers because the product can take too long to recognize these devices.
54
Off Timer
Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer 1 ~ Off Timer 7)
•Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose the days you want Off Timer to turn off your product.
– The check mark indicates days you’ve selected.
•Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use
the left and right arrow buttons to change entry fields.
Holiday Management
Timer will be disabled during a period specified as a holiday.
•Add Holiday: Specify the period you want to add as a holiday.
Select the start and end dates of the holiday you want to add using the u/d buttons, and click the Done
button.
The period will be added to the list of holidays.
– Start: Set the start date of the holiday.
– End: Set the end date of the holiday.
•Delete: Delete selected items from the list of holidays.
•Edit: Select a holiday item and then change the date.
•Set Applied Timer: Set the On Timer and Off Timer to not activate on public holidays.
– Press E to select the On Timer and Off Timer settings you do not want to activate.
– The selected On Timer and Off Timer will not activate.
55
Ticker
→ Ticker → E
Ticker
"The displayed image may differ depending on the model.
Input text while a video or image is displayed and display the text on the screen.
•Off / On
•Message: Enter a message to display on the screen.
•Time: Set the Start Time and End Time to display a Message.
•Font Options: Specify the text font and color for the message.
•Position: Select an orientation to display a Message.
•Scroll: Specify the scroll Direction and Speed for the message.
•Preview: Preview configured caption settings.
56
URL Launcher
→ URL Launcher → E
URL Launcher
URL Launcher
"The displayed image may differ depending on the model.
For details on how to use the URL Launcher feature, contact the dealer the product was purchased from.
"To use the URL Launcher feature, set Play via to URL Launcher in System.
57
URL Launcher Settings
→ URL Launcher Settings → E
URL Launcher Settings
"The displayed image may differ depending on the model.
•Install Web App: Enter URL to install the web application.
•Install from USB Device: Install the web application from the USB storage device.
•Uninstall: Remove the installed web application.
•Timeout Setting: Set the timeout period for connecting to the URL.
•Developer Mode: Enable developer mode.
58
Approving a connected device from the
server
"First configure the server Server Network Settings before device approval.
1
Access the server you have assigned to your device.
2
Enter your ID and password to log in.
3
Select Device from the top menu bar.
4
Select Unapproved from the sub-menus.
5
Select the device from the list and click the Approve button.
6
Enter the information required to approve the device.
"Device Name: Enter the device name.
"Device Group: Select to specify the group.
"Location: Enter the current location of the device.
"Expired: Set expiry date for the device's approval. If you do not want to set the expiry
date, select Never expired.
"Pressing the INFO button on the remote when a network schedule is running will
display the details of the schedule. Check that the correct device has been selected by
viewing the device ID in the details.
59
7
Select the All menu to check that the device has been registered.
8
When the device is approved by the server, the schedule registered in the selected group
will be downloaded to the device. The schedule will run after it is downloaded.
"For further details on how to configure a schedule, refer to the <MagicInfo Lite Server user's
manual>.
"If a device is deleted from the list of devices approved by the server, the device will reboot
to reset its settings.
Setting the current time
A schedule may not run if the time set on the device is different from the server's current time.
1
Select Device from the side menu bar.
2
Select your device.
3
Select Edit → Setup.
4
Select Time Zone.
"When connecting to the server for the first time, the time on the product is set using the
GMT time of the region where the server is installed.
"The time on the product can be changed from the server as shown in step 3.
"Turning the product off and then on again will restore the time setting on the product
to the last time that was set from the server.
"For further details on how to manage the time (scheduling, holiday management, etc.),
refer to the <MagicInfo Lite Server user's manual>.
60
Picture Mode
m MENU → Picture → Picture Mode → E
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
Video/Image mode improves the picture quality of the video device. Text mode improves the picture quality of the
computer.
•Shop & Mall
Suitable for shopping malls.
– Select either Video/Image or Text depending on the picture mode.
•Office & School
Suitable for offices and schools.
– Select either Video/Image or Text depending on the picture mode.
•Terminal & Station
Suitable for bus terminals and train stations.
– Select either Video/Image or Text depending on the picture mode.
•Video Wall
Suitable for environments where videowall display are used.
– Select either Video/Image or Text depending on the picture mode.
•Calibration
In this mode, the brightness, color, gamma and uniformity settings customized using the color calibration
program Color Expert are applied.
– To apply the Calibration mode properly, make sure you configure the picture quality settings, such as
brightness, color, gamma and uniformity, using the color calibration program Color Expert.
– To download the Color Expert program, visit www.samsung.com/displaysolutions.
Picture
Configure the Picture settings (Contrast, Color Tone, etc.).
The layout of the Picture menu options may vary depending on the product.
Chapter 06
·
·
·
Picture
Picture Mode
Color Temperature
Contrast
Brightness
Sharpness
Color
Tint (G/R)
70
45
65
50
G50 R50
Shop & Mall
10000K
"The displayed image may differ depending on the model.
61
Contrast / Brightness / Sharpness / Color /
Tint (G/R)
m MENU → Picture → E
Your product has several options for adjusting picture quality.
"When you make changes to Contrast, Brightness, Sharpness, Color or Tint (G/R), the OSD
will be adjusted accordingly.
"You can adjust and store settings for each external device you have connected to an input
on the product.
"Lowering picture brightness reduces power consumption.
Color Temperature
m MENU → Picture → Color Temperature → E
Adjust the color temperature (Red / Green / Blue). (Range: 2800K–10000K)
"Enabled when Color Tone is set to Off.
"If Picture Mode is set to Calibration, Color Temperature is disabled.
White Balance
m MENU → Picture → White Balance → E
2 Point
Adjust the color temperature for a more natural picture.
•R-Offset / G-Offset / B-Offset: Adjust each color’s (red, green, blue) darkness.
•R-Gain / G-Gain / B-Gain: Adjust each color’s (red, green, blue) brightness.
•Reset: Suitable for environments where videowall display are used.
10 Point
Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.
•Off / On
•Interval: Select interval to adjust.
•Red: Adjust the red level.
•Green: Adjust the green level.
•Blue: Adjust the blue level.
•Reset: Suitable for environments where videowall display are used.
"Some external devices may not support this function.
"Enabled when Picture Mode is set to Office & School (Video/Image).
62
Gamma
m MENU → Picture → Gamma → E
Adjust the primary color intensity.
"If Picture Mode is set to Calibration, Gamma is disabled.
Advanced Settings
m MENU → Picture → Advanced Settings → E
"If Picture Mode is set to Calibration, Advanced Settings is disabled.
Dynamic Contrast
Adjust the screen contrast.
•Off / Low / Medium / High
Black Tone
Select the black level to adjust the screen depth.
•Off / Dark / Darker / Darkest
Flesh Tone
Emphasize pink Flesh Tone.
"If Picture Mode is set to Text, Flesh Tone is disabled.
RGB Only Mode
Displays the Red, Green and Blue color for making fine adjustments to the hue and saturation.
•Off / Red / Green / Blue
"If Picture Mode is set to Text, RGB Only Mode is disabled.
Color Space
Adjusts the range and variety of colors (the color space) available to create images.
•Auto / Native / Custom
"To adjust Color, Red, Green, Blue and Reset, set Color Space to Custom.
HDMI UHD Color
Enable to optimize picture quality for HDMI UHD connection.
•HDMI1 (Off / On)
•HDMI2 (Off / On)
•Display Port (Off / On)
"When HDMI UHD Color is set to On, up to the 3840 x 2160 @ 60 Hz resolution is supported.
However, the SNOW-1703ULD model supports only 3840 x 2160 @ 60 / 59.94 / 50 Hz in Live
Mode.
When HDMI UHD Color is set to Off, up to the 1920 x 1080 @ 60 Hz resolution is supported.
However, the SNOW-1703ULD model supports only 1920 x 1080 @ 60 / 59.94 / 50 Hz in Live
Mode.
63
LED Picture Size
m MENU → Picture → LED Picture Size → E
Set the details of the picture size.
Output Resolution
Provides optimized pictures according to the LED screen resolution.
•UHD / FHD
"The S-Box Grouping function is not supported when Picture → LED Picture Size → Output
Resolution is set to FHD.
LED Picture Size
Choose size and aspect ratio picture displayed on screen.
To manually adjust the LED picture size, select Custom.
•Original: Display images in the original picture quality.
•Custom: Changes the resolution to suit the user's preferences.
Resolution
Set the width and height of the LED picture. (Max : 3840 x 2160)
Output Resolution Width x Height
Max Min
FHD
1920 x 1080 182 x 182
UHD
3840 x 2160 408 x 408
"Available only when LED Picture Size is set to Custom.
Fit to screen
Enlarges pictures to fit the screen.
•Off / On
"Available only when LED Picture Size is set to Custom.
LED HDR
m MENU → Picture → LED HDR → E
Set options to provide an optimal HDR effect.
When using multiple S-Boxes, if you set LED HDR to On, the images qualities of the S-box
outputs may differ. To prevent this, set the sub functions of LED HDR to Off.
Inverse Tone Mapping
Make the dark elements of the image darker and the bright elements brighter to make the
image as realistic as possible.
•Off / On
Dynamic Peaking
Enlarge the difference of instantaneous maximum/minimum luminance so that the bright
parts can be expressed more clearly.
•Off / On
Color Mapping
Map the color of the specific source image to the color of the target image in order to convert it
to the desired color.
•Off / On
64
Picture Options
m MENU → Picture → Picture Options → E
"If Picture Mode is set to Calibration, Picture Options is disabled.
Color Tone
If Picture Mode is set to Text
•Off / Cool / Standard / Warm
If Picture Mode is set to Video/Image
•Off / Cool / Standard / Warm1 / Warm2
"If Picture Mode is set to Calibration, Color Tone is disabled.
"Settings can be adjusted and stored for each external device connected to an input on the
product.
Digital Clean View
Reduce picture noise to avoid distractions such as flickering.
•Off / Auto
"If Picture Mode is set to Calibration, Digital Clean View is disabled.
"Enabled when Picture Mode is set to Video/Image.
HDMI Black Level
Selects the black level on the screen to adjust the screen depth.
•Normal / Low / Auto
"Available only in HDMI 1 and HDMI 2 mode (AV Timing : 480p, 576p, 720p, 1080i, 1080p).
Film Mode
This mode is suitable to view movies.
Sets the product to automatically sense and process film signals from all sources and adjust
the picture for optimum quality.
•Off / Auto1 / Auto2
"This option can be configured if the input source supports 480i, 576i or 1080i.
"This option is not supported when a PC is connected.
"Enabled when Picture Mode is set to Video/Image.
Reset Picture
m MENU → Picture → Reset Picture → E
Resets your current picture mode to its default settings.
65
OnScreen Display
OnScreen Display
Screen Protection
Message Display
Language
Menu Size
Reset OnScreen Display
English
Original
"The displayed image may differ depending on the model.
Screen Protection
m MENU → OnScreen Display → Screen Protection → E
Auto Protection Time
If the screen displays a still image for a certain period of time you define, the product activates the screen saver to
prevent the formation of burnt in ghost images on the screen.
•Off / 2 hours / 4 hours / 8 hours / 10 hours
Chapter 07
66
Message Display
m MENU → OnScreen Display → Message Display → E
Source Info
Select whether to display the source OSD when the input source changes.
•Off / On
No Signal Message
Select whether to display the no-signal OSD when no signal is detected.
•Off / On
MDC Message
Select whether to display the MDC OSD when the product is controlled by the MDC.
•Off / On
Download Status Message
Select to display the status when downloading content from a server or other device.
•Off / On
Language
m MENU → OnScreen Display → Language → E
Set the menu language.
"A change to the language setting will only be applied to the onscreen menu display. It will
not be applied to other functions on your PC.
Menu Size
m MENU → OnScreen Display → Menu Size → E
Set the aspect ratio of the menu to match the screen.
•Original / Medium / Small
Reset OnScreen Display
m MENU → OnScreen Display → Reset OnScreen Display → E
This option returns the current settings under OnScreen Display to the default factory settings.
67
Network
Network
Network Status
Open Network Settings
Server Network Settings
Device Name
[LED S/Box] Samsung LUH Series
"The displayed image may differ depending on the model.
Chapter 08
Network Status
m MENU → Network → Network Status → E
You can check the current network and Internet status.
Open Network Settings
m MENU → Network → Open Network Settings → E
Configure network settings to use various smart hub features such as Internet search, content sharing through a
home network and feature updates.
68
Network Settings
Connecting to a Wired Network
There are three ways to attach your product to your LAN using cable.
•You can attach your product to your LAN by connecting the LAN port on the back of your
product to an external modem using a LAN cable.
See the diagram below.
The Modem Port on the Wall
Modem Cable LAN Cable
External Modem
(ADSL / VDSL)
LAN
RJ45
•You can attach your product to your LAN by connecting the LAN port on the back of your
product to an IP Sharer which is connected to an external modem. Use LAN cable for the
connection. See the diagram below.
The Modem Port on the Wall
Modem Cable LAN Cable LAN Cable
External Modem
(ADSL / VDSL)
IP Sharer
(having DHCP server)
LAN
RJ45
•Depending on how your network is configured, you may be able to attach your product to
your LAN by connecting the LAN port on the back of your product directly to a network wall
outlet using a LAN cable.
See the diagram below. Note that the wall outlet is attached to a modem or router
elsewhere in your house.
LAN Cable
The Modem Port on the Wall
LAN
RJ45
If you have a Dynamic Network, you should use an ADSL modem or router that supports
the Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP
automatically provide the IP address, subnet mask, gateway, and DNS values your product
needs to access the Internet so you do not have to enter them manually. Most home networks
are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you
must enter the IP address, subnet mask, gateway, and DNS values manually on your product
Cable Setup Screen when you set up the network connection. To get the IP address, subnet
mask, gateway, and DNS values, contact your Internet Service Provider (ISP).
If you have a Windows computer, you can also get these values through your computer.
"You can use ADSL modems that support DHCP if your network requires a Static IP address.
"ADSL modems that support DHCP also let you use Static IP addresses.
"A Static IP address is recommended. If the IP address is changed by DHCP, LED Signage
Manager may be disconnected.
69
Set the network connection to use Internet services such as perform software upgrades.
Automatic Open Network Settings
Connect to the network using a LAN cable.
Make sure a LAN cable is connected first.
How to set up automatically
1
Select Open Network Settings. The Open Network Settings session starts.
2
The network test screen appears and verifies the network connection.
When the connection has been verified, the “Your TV is connected to the Internet. If you
have any problems using online services, please contact your internet service provider.”
message appears.
"If the connection process fails, check the LAN port connection.
"If the automatic process cannot find the network connection values or if you want to set the
connection manually, go to the next section, network setup.
Manual Open Network Settings
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and
DNS server address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
How to set up manually
1
Select Open Network Settings. The Open Network Settings session starts.
2
The network test screen appears and the verification process starts. Press Stop. The
verification process stops.
3
Select IP Settings on network connection screen. The IP Settings screen appears.
4
Select the field at the top, press E, and then set IP Settings to Enter manually. Repeat the
entry process for each field in the IP Address.
"Setting IP Settings to Enter manually automatically changes DNS Setting to Enter
manually.
5
When done, select OK at the bottom of the page, and then press E. The network test
screen appears and the verification process starts.
6
When the connection has been verified, the “Your TV is connected to the Internet. If you
have any problems using online services, please contact your internet service provider.”
message appears.
70
Server Network Settings
m MENU → Network → Server Network Settings → E
Connect to Server
To run Player connect to a network.
•Server Address / SSL / Port
"If the SSL option is enabled, the server is configured to use https and data transfer is
encrypted.
"Enter the server IP address and port number. Use 7001 as the port number. (If unable to
connect to the server using port number 7001, check with your server administrator to find
the correct port number and then change the port number.)
MagicInfo Mode
Select the appropriate MagicInfo Mode depending on the environment where you are using the
product.
•Lite / Premium
Server Access
Select a method to connect the server network.
•Allow / Deny
FTP Mode
Specify the FTP operating mode.
•Active / Passive
Proxy Server
Set up your proxy server connection and related functions.
Off / On
•Address / Port / ID / Password
"Address / Port / ID and Password are enabled only when Proxy Server is set to On.
Device Name
m MENU → Network → Device Name → E
Select or enter a device name.
This name can be shown on network remote controls over the network.
•[LED S/Box] Samsung LUH Series1 ~ 6 / User Input
71
System
System
Accessibility
Start Setup
Time
Auto Source Switching
Power Control
Eco Solution
Fan & Temperature
"The displayed image may differ depending on the model.
Accessibility
m MENU → System → Accessibility → E
Menu Transparency
Adjust transparency of menu box.
•High / Low
High Contrast
Set the background and font to high-contrast colors in Menu. Menu transparencies become opaque when the
option is selected.
•Off / On
Enlarge
Set whether to enlarge highlighted item in Menu.
•Off / On
Chapter 09
72
Start Setup
m MENU → System → Start Setup → E
Go through the initial setup steps like you did the first time you used this product.
"Enter your 4 digit PIN number. The default PIN number is "0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
Time
m MENU → System → Time → E
Configure various time-related settings.
"Press the INFO button if you want to view the current time.
Clock Set
Select Clock Set. Select Date or Time, and then press E.
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left
and right arrow buttons to move from one entry field to the next. Press E when done.
"You can set the Date and Time directly by pressing the number buttons on the remote
control.
NTP Settings
Set up the server URL and time zone to use the network time.
DST
Switches the DST (Daylight Saving Time) function on or off.
Off / On
•Start Date: Set the start date of Daylight Saving Time.
•End Date: Set the end date of Daylight Saving Time.
•Time Offset: Select the correct time offset your timezone.
"Start Date, End Date and Time Offset are enabled only when DST is set to On.
Sleep Timer
Automatically shuts off the product after a preset period of time.
(Off / 30 min. / 60 min. / 90 min. / 120 min. / 150 min. / 180 min.)
"Use the up and down arrows to select a period of time, and then press E. To cancel Sleep
Timer, select Off.
Power On Delay
When connecting multiple products, adjust the power-on time for each product to prevent
power overload (within the range 0–50 seconds).
73
Auto Source Switching
m MENU → System → Auto Source Switching → E
Turning on the display with Auto Source Switching On, and the previous video source selection
is not active, the display will automatically search the different video input sources for active
video.
Auto Source Switching
When the Auto Source Switching is On, the display video source will automatically be searched
for active video.
The Primary Source selection will be activated, if the current video source is not recognized.
Secondary Source selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform
two searches for an active source, each search checking the primary and then secondary
source. If both searches fail, the display will return to the first video source and display a
message indicating that there is no signal.
When the Primary Source selection is set to All, the display will search all the video source
inputs twice in sequence looking for an active video source, returning back to the first video
source in the sequence if no video is found.
Primary Source Recovery
Select whether to restore the selected primary input source when a primary input source is
connected.
"The Primary Source Recovery function is disabled if Primary Source is set to All.
Primary Source
Specify Primary Source for the automatic input source.
Secondary Source
Specify Secondary Source for the automatic input source.
"The Secondary Source function is disabled if Primary Source is set to All.
Power Control
m MENU → System → Power Control → E
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power
button is not needed.
•Off / On
Max. Power Saving
Turns off the product to reduce power consumption after the PC has been left idle for a
specified period of time.
•Off / On
74
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
•Auto
Power-saving mode will activate if no input signals are detected even though a source
device is connected to the display.
The message No Signal will appear if no source device is connected.
•Off
The message No Signal will appear if no input signals are detected.
"If No Signal is displayed although a source device is connected, check the cable
connection.
"If No Signal Message is set to Off, the No Signal message does not appear.
If this is the case, set No Signal Message to On.
•On
Power-saving mode will activate if no input signals are detected.
Network Standby
This feature keeps the network power on when the product turns off.
•Off / On
Power Button
The power button can be set to either turn on the power or turn on/off the power.
•Power On Only: Set the power button to turn on the power.
•Power On/Off: Set the power button to turn on/off the power.
Eco Solution
m MENU → System → Eco Solution → E
Eco Sensor
Automatically adjusts the picture brightness according to the ambient brightness.
•Off / On
•Min. Brightness: Set the screen's Min. Brightness to use when Eco Sensor is operating.
No Signal Power Off
Save power by turning the device off when no signal is received from any source.
•Off / 15 min. / 30 min. / 60 min.
"Disabled when an attached PC is in power saving mode.
"The product will automatically power off at a specified time. The time can be changed as
required.
Auto Power Off
The product will automatically turn off if you don’t press a button on the remote or touch a
button on product front panel within select hours to prevent overheating.
•Off / 4 hours / 6 hours / 8 hours
75
Fan & Temperature
m MENU → System → Fan & Temperature → E
Fan Control
Selects auto or manual for the fan speed settings.
•Auto / Manual
Temperature Control
This function detects the internal temperature of the product. You can specify the temperature
range that is acceptable.
The default temperature is set to 100 °C.
The recommended operating temperature for this product is 95 to 100 °C (based on an ambient
temperature of 40 °C).
"The screen will become darker if the current temperature exceeds the specified
temperature limit. If the temperature continues to rise, the product will power off to
prevent overheating.
Input Device Manager
m MENU → System → Input Device Manager → E
Configure options for external input devices connected to the product.
Keyboard Language
Configure the key combination used to change the input language.
Keyboard Type
Specify the keyboard type.
Input Language Shortcut
Select shortcut keys for switching between input languages.
Play via
m MENU → System → Play via → E
Select the appropriate Play via mode depending on the environment where you are using the
product.
The home screen may be different depending on the setting.
•MagicInfo / URL Launcher
76
Change PIN
m MENU → System → Change PIN → E
The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter it in Enter New PIN. Reenter the same 4 digits in
Confirm New PIN.
The product has memorized your new PIN.
"Default password: 0 - 0 - 0 - 0
Security
m MENU → System → Security → E
"Enter your 4 digit PIN number. The default PIN number is "0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
Safety Lock On
All the menus and buttons of the product and remote control, except for the Power button on
the remote control, will be locked by the Safety Lock On function.
To unlock the menus and buttons, press any button and then enter the password (default
password: 0-0-0-0).
Turn on Power On Button the enable the remote control's Power button to turn on the device
while Safety Lock On is enabled.
Power On Button
Turn on this feature to enable the remote control's Power button to turn on the device while
Safety Lock On is enabled.
•Off / On
Button Lock
This menu can be used to lock the buttons on the product.
Only the remote control can control the product if Button Lock is set to On.
•Off / On
USB Auto Play Lock
Select whether to automatically play MagicInfo content saved on a connected USB device.
•Off
Play MagicInfo content saved on the USB device automatically.
•On
Do not play MagicInfo content saved on the USB device automatically.
"Connecting a USB device containing MagicInfo content displays "USB Auto Play Lock :
On" for five seconds.
Remote Management
You can Allow or Deny external commands to access your device via a network.
The changed setting remains even after the product is turned off and on using the Panel key or
Power switch.
•Deny / Allow
77
General
m MENU → System → General → E
Smart Security
Security provided to protect your TV and connected storage devices against viruses includes.
Scan
Inspect the TV and connected storage devices to check for viruses.
Isolated List
This is the list of items that have been Isolated for containing viruses.
Real-Time Monitoring
Scans for viruses by monitoring the display device in real time.
Monitoring Results
Check the list of files, networks, and processes that have been blocked.
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
Anynet+ is a function that enables you to control all connected Samsung devices that support
Anynet+ with your Samsung product remote. The Anynet+ system can be used only with
Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this
feature, check if there is an Anynet+ logo on it.
•Off / On
"You can only control Anynet+ devices using the product remote control, not the buttons on
the product.
"The product remote control may not work under certain conditions. If this occurs, reselect
the Anynet+ device.
"Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
"Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of
the same type.
78
Troubleshooting for Anynet+
Problem Possible Solution
Anynet+ does not work.
•Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
•Check if the Anynet+ device power cord is properly connected.
•Check the Anynet+ device’s Video/HDMI cable connections.
•Check whether Anynet+ (HDMI-CEC) is set to On in the System menu.
•Check whether the remote control is Anynet+ compatible.
•Anynet+ doesn’t work in certain situations. (initial setup)
•If you have removed and then reconnected the HDMI cable, please make sure to search devices again or turn your
product off and on again.
•Check if the Anynet+ function of the Anynet device is set on.
I want to start Anynet+. •Check if the Anynet+ device is properly connected to the product and check if the Anynet+ (HDMI-CEC) is set to On
in the System menu.
I want to exit Anynet+. •Press the SOURCE button on the product remote control and select a non- Anynet+ device.
The message “Disconnecting
Anynet+ device ...” appears on
the screen.
•You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
•Use the remote control after the product has completed Anynet+ configuration or has finished switching to Anynet+.
The Anynet+ device does not
play. •You cannot use the play function when initial setup is in progress.
The connected device is not
displayed.
•Check whether or not the device supports Anynet+ functions.
•Check whether or not the HDMI cable is properly connected.
•Check whether Anynet+ (HDMI-CEC) is set to On in the System menu.
•Search Anynet+ devices again.
•Anynet+ requires an HDMI connection. Make sure the device is connected to your product with an HDMI cable.
•Some HDMI cables may not support Anynet+ functions.
•If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected,
please repeat the device scan.
79
HDMI Hot Plug
This feature is used to activate the time delay to turn on a HDMI source device.
•Off / On
Custom Logo
You can download, select, and set the display time of a custom logo that appears when the
product turns on.
•Custom Logo
"You can select a custom logo (image/video) or turn off the custom logo display.
"You must download the custom logo from an external USB device to set the custom
logo.
•Logo Display Time
"If the type of custom logo is Image, you can set the Logo Display Time.
•Download Logo File
"You can download a custom logo into the product from an external USB device.
"The file name of the custom logo you want to download must be saved as “samsung” in
all small letters.
"When there are multiple numbers of external USB connections, the product will
attempt to download the custom logo from the last device that has been connected to
the product.
Custom logo file restrictions
•For image type custom logo, only bitmap files (aRGB 32bpp format) are supported.
•The resolution of the image type custom logo must be between a minimum of 128 x 64
and the maximum screen resolution. (Horizontal/Vertical values of the resolution must
be multiples of 4.)
•For video type custom logo, only TS Stream types are supported.
•The maximum supported video file is 150 MB. The recommended length of a video file is
20 seconds or less.
Game Mode
When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more
realistic gaming experience by selecting game mode.
•Off / On
"Precautions and limitations for Game Mode
To disconnect the game console and connect another external device, set Game Mode to
Off in the setup menu.
Empty Storage
Delete files to make space for new content. Recently played files will not be deleted.
Reset System
m MENU → System → Reset System → E
This option returns the current settings under system to the default factory settings.
80
Support
Chapter 10
Software Update
m MENU → Support → Software Update → E
The Software Update menu lets you upgrade your product software to the latest version.
"Be careful not to turn off the power until the upgrade is complete. The product will turn off
and on automatically after completing the software upgrade.
Update Now
Update the software to the latest version.
Auto Update
This feature automatically updates the product when not in use.
•Off / On
Contact Samsung
m MENU → Support → Contact Samsung → E
View this information when your product does not work properly or when you want to upgrade
the software.
You can find information regarding our call centers and how to download products and
software.
"Contact Samsung and find the product Model Code and Software Version.
Reset All
m MENU → Support → Reset All → E
This option returns all the current settings for a display to the default factory settings.
81
Playing photos and videos (Media Play)
Play photos or videos saved on a storage device.
Play a variety of content using the following methods.
•Using a USB device: Play media content such as videos and photos from a USB device.
•Connecting a storage device: Play media content saved on a storage device such as a smartphone, camera, PC or cloud service.
Read the following before using media play with a USB device
Caution
•Before connecting a USB device to the product, back up files to ensure your data is not damaged or lost.
Samsung is not liable for any damage or loss of data.
•Do not remove a USB device while it is loading.
•If a USB device is connected using a USB extension cable, the USB device may not be recognized or files saved on the device may not be able to be read.
•If the product does not recognize a connected USB device, the files on the USB device may be corrupted or may not be able to be played.
If this occurs, connect the USB device to the PC to format the device, then make sure the device is connected properly.
•USB HDD greater than 2TB is not supported.
Enjoy videos, photos files saved on a USB Mass Storage Class (MSC) device.
Chapter 11
82
Compatible devices with media play
•Some USB digital cameras and smartphones may not be compatible with the product.
•Media play is only compatible with USB MSC devices.
•MSC device refers to a Mass Storage Class Bulk-Only Transport device.
Examples of MSC devices include Thumb drives, Flash card readers and USB HDDs. (USB hubs are not supported.)
These MSC devices must be connected directly to a USB port on the product.
•If more than one Picture Transfer Protocol (PTP) device is connected, only one will work at a time.
•If multiple MSC devices are connected, some devices may not be recognized.
•USB devices that require high power (higher than 500mA or 5V) may not be supported.
•If an overheating warning message appears when a USB device is connected or used, the USB device may not be recognized or function properly.
•The screensaver activates if the product is left idle for a period of time specified in Auto Protection Time.
•Power-saving mode on some external hard disk drives may automatically deactivate after connecting to the product.
File system and formats
•Media play may not function properly with unlicensed multimedia files.
•Media Transfer Protocol (MTP) is not supported.
•Supported file systems include FAT16, FAT32 and NTFS (read only).
•Media play supports the sequential JPEG format.
It does not support the progressive JPEG format.
•Images with a higher resolution take longer to be displayed on the screen.
•The maximum JPEG resolution supported is 15360x8640 pixels.
•If a file is incompatible or corrupted, a message Not Supported File Format. appears.
•When sorting files in folder view mode, a maximum of 1000 files can be displayed in each folder.
•If a USB device contains 8000 files and folders or more, some files and folders may not open.
•DRM MP3 files downloaded from websites that charge a fee cannot be played.
Digital Rights Management (DRM) refers to a system for protecting the copyrights of data circulated via the Internet or other digital media by enabling
secure distribution and/or disabling illegal distribution of the data.
83
Using a USB device
Connecting a USB device
1
Turn on your product.
2
Connect a USB device containing photo and/or movie files to the USB port on the back or side panel of the product.
3
The Player page automatically appears as soon as a USB device connects to the product.
"If only one USB device is connected, files saved on the USB device are displayed automatically.
"To view content saved on a USB device, connect the USB device to a USB port on the product.
Removing a USB device
Removing a USB device from Source
1
Press on the remote control.
→ Player → Options → Safely Remove
2
Select Safely Remove and wait until the USB device is disconnected. The USB device is disconnected.
"It is recommended to use a USB
HDD that has a power adapter.
"It is recommended to remove a USB
device using the Safely Remove
function.
84
Features provided in the media content list page
→ Player → Storage device → USB
The media content list page on a storage device provides the following features.
•Storage device
Internal Memory / USB
•Filter By
Among Video, Image, PDF, Office and My Templates content saved on a storage device, view content files under a desired file format only.
•Options
85
Option Name Operations
Play Selected
Select the content you want to play, then select the play button at the top of the
screen.
Send
Select the content you want to send to the other device, then select the Send
button at the top of the screen.
Delete
Select the content you want to delete, then select the Delete button at the top of
the screen.
Storage
Select the save location for schedules downloaded from the magicInfo server and
other devices.
Safely Remove
Safely removes USB memory
Content Size
Set the screen size for content.
Slideshow Speed
Set the time each slide will play for.
Slideshow Effect
Set which transition effect to apply between image slides.
Default Content
This default content will be displayed if you run a channel while no programs are
scheduled on the channel.
Reset
Restore all the values under Options to the default when the product was
purchased.
Menu items in the media content list page
Play Selected
Send
Delete
Storage
Safely Remove
Content Size
Slideshow Speed
Slideshow Effect
Default Content
Reset
Internal Memory
Random
MagicINFO
Select the content you want to play, then select the Play button at the top of the
screen.
"The displayed image may differ depending on the model.
86
Available buttons and features during photo playback
Pressing the E button or π, ∂, ∑, µ button displays the following buttons. The RETURN button makes the buttons disappear.
•Pause / Play
Start or stop a slideshow. Using a slideshow, it is possible to play all photos in a folder.
•Previous / Next
View the previous or next photo.
Available buttons and features during video playback
Pressing the E button or π, ∂, ∑, µ button displays the following buttons. The RETURN button makes the buttons disappear.
•Pause / Play
Pause or play a video.
The following features are available in pause mode.
•Rewind / Fast forward
Rewind or fast forward a video. Speed up playback up to 3x, if required. To change the playback speed to the original speed, select ∂.
•Previous / Next
To play the previous video, select π twice. Selecting π once will play the current video from the beginning.
To play the next video, select µ.
"Pressing the INFO button while a
device name is selected will display
information about the selected
device.
"Pressing the INFO button while a le
is selected will display information
about the selected le.
87
Troubleshooting Guide
Requirements Before Contacting Samsung Customer Service Center
Testing the Product
Check if your product is operating normally by using the product test function.
If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing.
1
Power off both the PC and product.
2
Disconnect all the cables from the product.
3
Power on the product.
4
If No Signal is displayed, the product is operating normally.
Checking the Resolution and Frequency
Not Optimum Mode will briefly be displayed if a mode that exceeds a supported resolution is selected(refer to Supported Resolutions).
"Before calling Samsung Customer
Service Center, test your product
as follows. If the problem persists,
contact Samsung Customer Service
Center.
"If the screen remains blank, check
the PC system, video controller and
cable.
Chapter 12
88
Check the followings.
Installation issue (PC mode)
The screen keeps switching on and off.
Check the cable connection between the product and PC, and ensure the connection is secure.
Blank spaces are found on all four sides of the screen when
a DP, an HDMI, or an HDMI-DVI cable is connected between
the product and PC.
The blank spaces found on the screen have nothing to do with the product.
Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem,
adjust the screen size in the HDMI or DVI settings for the graphics card.
If the graphics card settings menu does not have an option to adjust the screen size, update the
graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer for further details about how to
adjust the screen settings.)
Screen issue
The power LED is off. The screen will not switch on.
Make sure that the power cord is connected.
No Signal is displayed on the screen.
Check that the product is connected correctly with a cable.
Check that the device connected to the product is powered on.
Not Optimum Mode is displayed.
This message is displayed when a signal from the graphics card exceeds the product's
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and set the maximum resolution and frequency
according to the product specifications.
The images on the screen look distorted.
Check the cable connection to the product.
The screen is not clear. The screen is blurry.
Set the resolution and frequency to the recommended level.
89
Screen issue
The screen appears unstable and shaky.
Check that the resolution and frequency of the PC and graphics card are set within a range
compatible with the product. Then, change the screen settings if required by referring to the
Additional Information on the product menu and the Standard Signal Mode Table.
There are shadows or ghost images left on the screen.
The screen is too bright. The screen is too dark.
Adjust Brightness and Contrast.
Screen color is inconsistent.
Go to Picture and adjust the Color Space settings.
White does not really look white.
Go to Picture and adjust the White Balance settings.
There is no image on the screen and the power LED blinks
every 0.5 to 1 second.
The product is in power-saving mode.
Press any key on the keyboard or move the mouse to return to the previous screen.
The product will turn off automatically.
Go to System and make sure Sleep Timer is set to Off.
If a PC is connected to the product, check the power status of the PC.
Make sure the power cable is connected properly to the product and power outlet.
If the signal from a connected device is not detected, the product automatically turns off after
10 to 15 minutes.
Picture quality of the product is different from the dealer
shop where it was purchased.
Use an HDMI cable to obtain high-definition (HD) picture quality.
The screen display does not look normal.
Encoded video content may cause the display to appear corrupted in scenes featuring fast
moving objects such as in a sports event or action video.
Low signal level or low picture quality may cause the display to appear corrupted. This does not
mean the product is defective.
A cell phone within a distance of one-meter radius may cause static on analog and digital
products.
90
Screen issue
The brightness and color do not look normal.
Go to Picture and adjust the screen settings such as Picture Mode, Color, Brightness and
Sharpness.
Reset the screen settings to the default settings.
Lines (red, green or blue) are displayed on the screen.
These lines are displayed when there is a defect in DATA SOURCE DRIVER IC on the monitor.
Contact a Samsung Service Center to resolve the issue.
The display looks unstable and then freezes.
The screen may freeze when a resolution other than the recommended resolution is used or
if the signal is not stable. To resolve the issue, change the PC resolution to the recommended
resolution.
The screen cannot be displayed in full screen.
A scaled SD (4:3) content file can cause black bars on both sides of an HD channel screen.
A video with an aspect ratio different from the product can cause black bars at the top and
bottom of the screen.
Change the screen size setting to full screen on the product or source device.
Remote control issue
The remote control does not work.
Make sure that the batteries are correctly in place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs switched on in the vicinity.
Source device issue
A beeping sound is heard when my PC is booting.
If a beeping sound is heard when your PC is booting, have your PC serviced.
91
Other issue
The product smells like plastic.
The plastic smell is normal and disappears over time.
Video playback is choppy.
Check the cable connection and connect it again if required.
Using an excessively hard or thick cable may cause choppy video playback.
Make sure cables are flexible enough to ensure durability. When mounting the product onto a
wall, it is recommended to use right-angle cables.
Small particles are found on the edges of the product.
The particles are part of the product design. The product is not defective.
When I try to change the PC resolution, a message "The
dened resolution is not currently supported." appears.
The message "The defined resolution is not currently supported." appears if the input source
resolution exceeds the maximum resolution of the display.
To resolve the issue, change the PC resolution to a resolution supported on the display.
HDMI Black Level is not functioning properly on an HDMI
device with YCbCr output.
This function is available only when a source device, such as a DVD player and STB, is connected
to the product via an HDMI (RGB signal) cable.
The IR sensor is not functioning.
Make sure the sensor light turns on when a button is pressed on the remote control.
•If the light does not turn on, turn the power switch off and then on again.
If the sensor light still does not turn on after the power switch is turned off and then on
again, an internal jack may be disconnected.
Contact your nearest service center to have the product serviced.
In power-saving mode, when the input source is
DisplayPort, PC display settings cannot be saved.
Go to System → Power Control and set Max. Power Saving to Off. Alternatively, configure the PC
display output settings again. Ensure the set is turned on.
When booting the PC with the input source set to
DisplayPort, the BIOS and booting screens do not appear.
Boot the PC when the set is turned on or when the input source is not DisplayPort.
92
Q & A
Question Answer
How can I change the frequency?
Set the frequency on your graphics card.
•Windows 7: Go to Control Panel → Appearance and Personalization → Display → Adjust
resolution → Advanced Settings → Monitor and adjust the frequency in Monitor Settings.
•Windows 8: Go to Settings → Control Panel → Appearance and Personalization → Display
→ Adjust resolution → Advanced Settings → Monitor and adjust the frequency in Monitor
Settings.
•Windows 10: Go to Settings → System → Display → Advanced display settings → Display
adapter properties → Monitor, and adjust Screen refresh rate under Monitor settings.
How can I change the resolution?
•Windows 7: Go to Control Panel → Appearance and Personalization → Display → Adjust
Resolution and adjust the resolution.
•Windows 8: Go to Settings → Control Panel → Appearance and Personalization → Display →
Adjust Resolution and adjust the resolution.
•Windows 10: Go to Settings → System → Display → Advanced display settings, and adjust
the resolution.
How do I set powersaving mode?
•Windows 7: Set power-saving mode in Control Panel → Appearance and Personalization →
Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•Windows 8: Set power-saving mode in Settings → Control Panel → Appearance and
Personalization → Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•Windows 10: Set power-saving mode in Settings → Personalization → Lock screen → Screen
timeout settings → Power & sleep or BIOS SETUP on the PC.
"Refer to the user manual for your
PC or graphics card for further
instructions on adjustment.
93
Specications
General
Model Name SNOW-1703USNOW-1703ULD
Power Supply
AC100-240V~ 50/60Hz
Based on the AC voltage of the adapter. For the DC voltage of the product, refer to the product label.
Environmental
considerations
Operating
Temperature : 50 °F - 104 °F (10 °C - 40 °C)
Humidity : 10% - 80%, non-condensing
Storage
Temperature : -4 °F - 113 °F (-20 °C - 45 °C)
Humidity : 5% - 95%, non-condensing
Supported models
IF015H, IF020H, IF025H, IF025H-D, IF040H-D, IF040H-DL,
IF060H-D, IF060H-DL, IF085H-DL
IF015H, IF020H, IF025H, IF025H-D, IF040H-D, IF040H-DL,
IF060H-D, IF060H-DL, IF085H-DL, IF012J
Chapter 13
94
Model Name IF015HIF020HIF025HIF012J
Cabinet
Pixel Pitch
1.5 mm 2.0 mm 2.5 mm 1.26 mm
LED pixel conguration
3-in-1(R/G/B in 1 LED) 3-in-1(G/R/B in 1 LED)
LED pixel size (W x H)
1.0 mm x 1.0 mm 1.5 mm x 1.5 mm 2.1 mm x 2.1 mm 1.0 mm x 1.0 mm
Pixels (Row x Column)
320 x 360 pixels 240 x 270 pixels 192 x 216 pixels 640 x 360 pixels
Aspect ratio (W:H)
8:9 16:9
Synchronization
Refresh rate
1920/3840Hz 3840Hz
Video Frame rate
50/60Hz
Model Name IF025H-D IF040H-D / IF040H-DL IF060H-D / IF060H-DL IF085H-DL
Cabinet
Pixel Pitch
2.5 mm 4.0 mm 6.0 mm 8.5 mm
LED pixel conguration
3-in-1(R/G/B in 1 LED)
LED pixel size (W x H)
2.1 mm x 2.1 mm
Pixels (Row x Column)
192 x 288 pixels 120 x 180 pixels 80 x 120 pixels 56 x 84 pixels
Aspect ratio (W:H)
2:3
Synchronization
Refresh rate
1920/3840Hz 15360/30720Hz
Video Frame rate
50/60Hz
95
Power Supply
AC100-240V~ 50/60Hz
Environmental
considerations
Operating
Temperature : 32 °F - 104 °F (0 °C - 40 °C)
Humidity : 10% - 80%, non-condensing
Storage
Temperature : -4 °F - 113 °F (-20 °C - 45 °C)
Humidity : 5% - 95%, non-condensing
"Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor
installation takes place automatically. However, you can customize the installation settings if desired.
"For detailed device specifications, visit the Samsung website.
96
Preset Timing Modes
"This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a
resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution
specified for your product.
"When HDMI UHD Color is set to On, up to the 3840 x 2160 @ 60 Hz resolution is supported. When HDMI UHD Color is set to Off, up to the 1920 x 1080 @
60 Hz resolution is supported.
Model Name SNOW-1703USNOW-1703ULD
Supported mode
Normal mode Normal mode Live Mode
Synchronization
Horizontal Frequency
30 – 135 kHz 65 – 134 kHz
Vertical Frequency
30 – 75 Hz (DP), 24 – 75 Hz (HDMI) 50 / 59.94 / 60 Hz
Resolution
Optimum Resolution
1920 x 1080 @ 60 Hz, 3840 x 2160 @ 60 Hz
Maximum Resolution
1920 x 1080 @ 60 Hz, 3840 x 2160 @ 60 Hz
The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal
transmitted from the PC does not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings
according to the following table by referring to the graphics card user manual.
97
SNOW-1703U / SNOW-1703ULD: Normal mode
Resolution
Horizontal
Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
S-Box Grouping
Supported
IBM/VESA, 640 x 480 31.469 59.940 25.175 N / N -
Mac, 640 x 480 35.000 66.667 30.240 N / N -
VESA, 640 x 480 37.861 72.809 31.500 N / N -
VESA, 640 x 480 37.500 75.000 31.500 N / N -
IBM, 720 x 400 31.469 70.087 28.322 N / P -
VESA, 800 x 600 35.156 56.250 36.000 P / P -
VESA, 800 x 600 37.879 60.317 40.000 P / P -
VESA, 800 x 600 48.077 72.188 50.000 P / P -
VESA, 800 x 600 46.875 75.000 49.500 P / P -
Mac, 832 x 624 49.726 74.551 57.284 N / N -
VESA, 1024 x 768 48.363 60.004 65.000 N / N O
VESA, 1024 x 768 56.476 70.069 75.000 N / N -
VESA, 1024 x 768 60.023 75.029 78.750 P / P -
VESA, 1152 x 864 67.500 75.000 108.000 P / P -
Mac, 1152 x 870 68.681 75.062 100.000 N / N -
VESA, 1280 x 720 45.000 60.000 74.250 P / P O
VESA, 1280 x 800 49.702 59.810 83.500 N / P -
VESA, 1280 x 1024 63.981 60.020 108.000 P / P O
VESA, 1280 x 1024 79.976 75.025 135.000 P / P -
"Horizontal Frequency
The time required to scan a single
line from the left to the right side
of the screen is called a horizontal
cycle. The reciprocal number of a
horizontal cycle is called horizontal
frequency. Horizontal frequency is
measured in kHz.
"Vertical Frequency
The product displays a single image
multiple times per second (like a
uorescent light) to display what
the viewer sees. The rate of a single
image being displayed repeatedly per
second is called vertical frequency
or refresh rate. Vertical frequency is
measured in Hz.
98
Resolution
Horizontal
Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
S-Box Grouping
Supported
VESA, 1366 x 768 47.712 59.790 85.500 P / P -
VESA, 1440 x 900 55.935 59.887 106.500 N / P -
VESA, 1600 x 900 60.000 60.000 108.000 P / P O
VESA, 1680 x 1050 65.290 59.954 146.250 N / P -
VESA, 1920 x 1080 67.500 60.000 148.500 P / P O
VESA CVT, 1920 x 1080 66.587 59.934 138.500 P / N -
VESA CVT, 2560 x 1440 88.787 59.951 241.500 P / N -
VESA CVT, 3840 x 2160 133.313 59.997 533.250 P / N -
CTA-861 VIC 3, 720 x 480 31.469 59.940 27.000 N / N -
CTA-861 VIC 4, 1280 x 720 45.000 60.000 74.250 P / P O
CTA-861 VIC 5, 1920 x 1080i 33.750 60.000 74.250 P / P -
CTA-861 VIC 16, 1920 x 1080 67.500 60.000 148.500 P / P O
CTA-861 VIC 18, 720 x 576 31.250 50.000 27.000 N / N O
CTA-861 VIC 19, 1280 x 720 37.500 50.000 74.250 P / P O
CTA-861 VIC 20, 1920 x 1080i 28.125 50.000 74.250 P / P -
CTA-861 VIC 31, 1920 x 1080 56.250 50.000 148.500 P / P O
CTA-861 VIC 32, 1920 x 1080 27.000 24.000 74.250 P / P -
CTA-861 VIC 33, 1920 x 1080 28.125 25.000 74.250 P / P -
CTA-861 VIC 34, 1920 x 1080 33.750 30.000 74.250 P / P -
CTA-861 VIC 93, 3840 x 2160 54.000 24.000 297.000 P / P -
99
Resolution
Horizontal
Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
S-Box Grouping
Supported
CTA-861 VIC 94, 3840 x 2160 56.250 25.000 297.000 P / P -
CTA-861 VIC 95, 3840 x 2160 67.500 30.000 297.000 P / P -
CTA-861 VIC 96, 3840 x 2160 112.500 50.000 594.000 P / P O
CTA-861 VIC 97, 3840 x 2160 135.000 60.000 594.000 P / P O
SNOW-1703ULD: Live Mode
Resolution
Horizontal
Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
S-Box Grouping
Supported
VESA, 1920 x 1080 67.500 60.000 148.500 P / P -
VESA CVT, 1920 x 1080 66.587 59.934 138.500 P / N -
VESA CVT, 3840 x 2160 133.313 59.997 533.250 P / N -
CTA-861 VIC 16, 1920 x 1080 67.500 60.000 148.500 P / P -
CTA-861 VIC 97, 3840 x 2160 135.000 60.000 594.000 P / P -
100
Appendix
Responsibility for the Pay Service (Cost to
Customers)
"When the service is requested, in spite of in warranty, we may charge you for a visit from a
service technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
•If a service technician gives instructions on how to use product or simply adjusts options
without disassembling product.
•If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal,
etc.)
•If a product is reinstalled or devices are connected additionally after installing the
purchased product for the first time.
•If a product is reinstalled to move to a different spot or to move to a different house.
•If customer requests instructions on how to use because of another company's product.
•If customer requests instructions on how to use the network or another company's program.
•If customer requests software installation and setup for the product.
•If a service technician removes/cleans dusts or foreign materials inside of the product.
•If customer requests an installation additionally after purchasing a product through home-
shopping or online.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
•External impact or drop.
•Use of supplies or separately sold product unspecified by Samsung.
•Repair from a person besides an engineer of outsourcing service company or partner of
Samsung Electronics Co., Ltd.
•Remodeling or repairing the product by customer.
•Using it with incorrect voltage or non-authorized electrical connections.
•Not following the "cautions" in User Manual.
Others
•If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)
•If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head,
Vibrator, Lamp, Filter, Ribbon, etc.)
"If customer requests a service in case the product has no defect, service fee may be
charged. So please read User Manual first.
Chapter 14
101
License
The terms HDMI and HDMI High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States and other countries.
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the
product menu. Open Source Licence Notice is written only English.
For information on the Open Source Licence Notice, contact the Samsung Customer Center
or send email to oss.request@samsung.com.
Open Source Announcement
Some software components of this product incorporate source code covered under the GNU
General Public License (GPL), the GNU Lesser General Public License (LGPL) etc.
Acknowledgement:
The software included in this product contains copyrighted software that is licensed under
the GPL/LGPL etc. You may obtain the complete Corresponding Source code from us for
a period of three years after our last shipment of this product by sending email to: oss.
request@samsung.com
If you want to obtain the complete Corresponding Source code in the physical medium such
as CD-ROM, the cost of physically performing source distribution may be charged.
You may also find a copy of the source at following website.
http://software-dl.ti.com/processor-sdk-linux/esd/AM335X/latest/exports/software_
manifest.htm