Table of Contents
- Safety
- Device setup
- PC software (Multiple Display Control)
- Home screen
- Menu
- Multimedia content (Media Play)
- Troubleshooting
- Appendix
Samsung LH55MLEPLSC/EN User Manual
Displayed below is the user manual for LH55MLEPLSC/EN by Samsung which is a product in the Signage Displays category. This manual has pages.
Related Manuals
The colour and the appearance may differ depending on the product, and the specications
are subject to change without prior notice to improve the performance.
USER
MANUAL
ML32E / ML55E / ML55E-R
2
Table of contents
Table of contents
01. Safety
Safety precautions 5
Electricity and safety 5
Installation 6
Operation 7
Storage 8
Cleaning 9
Precautions when handling the panel 9
02. Device setup
Installation 10
What’s Included 10
Control panel 11
Reverse side 13
Proximity sensor 14
External sensor kit (sold separately) 15
Anti-theft lock 16
Remote control 17
Connection using an IR Stereo cable (sold separately) 19
Guided installation 20
External connection 23
Checkpoints 23
Cable Connection 23
Control Codes 25
PC connection 33
AV connection 36
LAN connection 38
Source selection 38
03. PC software (Multiple Display
Control)
Installation/uninstallation 39
Installation 39
Uninstallation 39
Connection 40
Using the RS-232C cable 40
Using the ethernet cable 40
04. Home screen
Player 42
Approving a connected device from the server 42
Network Channel 46
Local Channel 46
My Templates 47
Available features in the Player page 47
Setting the Player page 47
When content is running 48
File formats compatible with Player 49
File formats compatible with Video Wall 54
Schedule 55
Available features in the Schedule page 55
Template 56
Available features in the Template page 56
Entering text 57
Inserting content such as videos, photos and PDF les
57
Conguring the background image/background music
57
Preview 58
Clone Product 58
When a duplicate le is not found on the external
storage device 58
When a duplicate le is found on the external storage
device 58
ID Settings 59
Device ID 59
Device ID Auto Set 59
PC Connection Cable 59
DisplayPort Daisy Chain 59
Video Wall 59
Apply to 59
Video Wall 60
3
Table of contents
Network Status 60
Picture Mode 61
On/Off Timer 62
On Timer 62
Off Timer 62
Holiday Management 62
Ticker 63
More settings 63
URL Launcher 64
05. Menu
Screen adjustment 65
OnScreen display adjustment 69
Sound adjustment 71
Network 72
Network Settings (Wired) 73
Network Setting (Wireless) 75
WPS(PBC) 76
System 77
Anynet+ (HDMI-CEC) 82
Support 85
06. Multimedia content (Media Play)
Before you play 86
Compatible devices with media play 86
File system and formats 86
Using a USB device 87
Connecting a USB device 87
Removing a USB device 87
Playing multimedia content 87
Approving a PC/mobile device connection 87
When connected to a home network (DLNA) 88
Multimedia content list 89
Menus available 90
Photo 90
Video 91
Music 92
Subtitles and supported le formats 93
Subtitle 93
Supported image resolutions 93
Supported music le formats 93
Supported video formats 94
07. Troubleshooting
Before you contact us 96
Diagnosis 96
Screen Resolution 96
Checkpoints 97
Frequently asked questions 103
08. Appendix
Specications 104
General 104
PowerSaver 106
Preset timing modes 106
Responsibility for the pay service (Cost to Customers)
109
Not a product defect 109
A product damage caused by customer’s fault 109
Others 109
Optimum picture quality and afterimage burn-in
prevention 110
Optimum picture quality 110
Prevention of afterimage burn-in 110
Preventing afterimage burn-in 111
License 112
4
About this manual
About this manual
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2015 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of
Samsung Electronics is prohibited.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards
Association.
Ownership of all other trademarks is attributed to their due owner.
• An administration fee may be charged if either
a an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
b you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
• The amount of such administration charge will be advised to you before any work
or home visit is carried out.
Symbols
WARNING
A serious or fatal injury may result if instructions are not followed.
CAUTION
Injury or damage to property may result if instructions are not followed.
Note
Instructions marked by this symbol must be followed.
5
Chapter 1. Safety
Safety
Safety precautions
CAUTION
RISK OF ELECTRIC SHOCK! DO NOT OPEN THE PRODUCT.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
Electricity and safety
The following images are for reference only.
WARNING
Do not use a damaged power cord or plug, or a loose power socket.
• An electric shock or re may result.
Do not use multiple products with a single power socket.
• Overheated power sockets may cause a re.
Do not touch the power plug with wet hands. Otherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose.
• An unsecure connection may cause a re.
Connect the power plug to a grounded power socket (type 1 insulated devices only).
• An electric shock or injury may result.
Do not bend or pull the power cord with force. Be careful not to leave the power cord
under a heavy object.
• Damage to the cord may result in a re or electric shock.
Do not place the power cord or product near heat sources.
• A re or electric shock may result.
Clean any dust around the pins of the power plug or the power socket with a dry cloth.
• A re may result.
CAUTION
Do not disconnect the power cord while the product is being used.
• The product may become damaged by an electric shock.
Only use the power cord provided with your product by Samsung. Do not use the
power cord with other products.
• A re or electric shock may result.
Keep the power socket where the power cord is connected unobstructed.
• The power cord must be disconnected to cut off power to the product when an issue
occurs.
• Note that the product is not completely powered down by using only the power
button on the remote.
Hold the plug when disconnecting the power cord from the power socket.
• An electric shock or re may result.
6
Chapter 1. Safety
Installation
WARNING
Do not place candles, insect repellants or cigarettes on top of the product. Do not
install the product near heat sources.
• A re may result.
Have a technician install the wall-mount hanger.
• Installation by an unqualied person can result in an injury.
• Only use approved cabinets.
Do not install the product in poorly ventilated spaces such as a bookcase or closet.
• An increased internal temperature may cause a re.
Install the product at least 10 cm away from the wall to allow ventilation.
• An increased internal temperature may cause a re.
Keep the plastic packaging out of the reach of children.
• Children may suffocate.
Do not install the product on an unstable or vibrating surface (insecure shelf, sloped
surface, etc.)
• The product may fall and become damaged and/or cause an injury.
• Using the product in an area with excess vibration may damage the product or cause
a re.
Do not install the product in a vehicle or a place exposed to dust, moisture (water
drips, etc.), oil, or smoke.
• A re or electric shock may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a stove.
• The product lifespan may be reduced or a re may result.
Do not install the product within the reach of young children.
• The product may fall and injure children.
• As the front is heavy, install the product on a at and stable surface.
Edible oil, such as soybean oil, can damage or deform the product. Do not install the
product in a kitchen or near a kitchen counter.
CAUTION
Do not drop the product while moving.
• Product failure or personal injury may result.
Do not set down the product on its front.
• The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom edge of
the front of the product is not protruding.
• The product may fall and become damaged and/or cause an injury.
• Install the product only on cabinets or shelves of the right size.
Set down the product gently.
• Product failure or personal injury may result.
Installing the product in an unusual place (a place exposed to a lot of ne dust,
chemical substances, extreme temperatures or a signicant presence of moisture, or
a place where the product will operate continuously for an extended period of time)
may seriously affect its performance.
• Be sure to consult Samsung Customer Service Centre if you want to install the
product at such a place.
7
Chapter 1. Safety
Operation
WARNING
There is a high voltage inside the product. Never disassemble, repair or modify the
product yourself.
• A re or electric shock may result.
• Contact Samsung Customer Service Centre for repairs.
Before moving the product, turn off the power switch and disconnect the power cable
and all other connected cables.
• Damage to the cord may result in a re or electric shock.
If the product generates abnormal sounds, a burning smell or smoke, disconnect the
power cord immediately and contact Samsung Customer Service Centre.
• An electric shock or re may result.
Do not let children hang from the product or climb on top of it.
• Children may become injured or seriously harmed.
If the product is dropped or the outer case is damaged, turn off the power switch and
disconnect the power cord. Then contact Samsung Customer Service Centre.
• Continued use can result in a re or electric shock.
Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the
product.
• The product or heavy objects may fall as children try to reach for the toys or sweets
resulting in a serious injury.
During a lightning or thunderstorm, power off the product and remove the power
cable.
• A re or electric shock may result.
Do not drop objects on the product or apply impact.
• A re or electric shock may result.
Do not move the product by pulling the power cord or any cable.
• Product failure, an electric shock or re may result from a damaged cable.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate the
area immediately.
• Sparks can cause an explosion or re.
Do not lift or move the product by pulling the power cord or any cable.
• Product failure, an electric shock or re may result from a damaged cable.
Do not use or keep combustible spray or an inammable substance near the product.
• An explosion or re may result.
Ensure the vents are not blocked by tablecloths or curtains.
• An increased internal temperature may cause a re.
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that burn
easily (paper, matches, etc) into the product (via the vent or input/output ports, etc).
• Be sure to power off the product and disconnect the power cord when water or other
foreign substances have entered the product.
Then contact Samsung Customer Service Centre.
• Product failure, an electric shock or re may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on
top of the product.
• Be sure to power off the product and disconnect the power cord when water or other
foreign substances have entered the product.
Then contact Samsung Customer Service Centre.
• Product failure, an electric shock or re may result.
CAUTION
Leaving the screen xed on a stationary image for an extended period of time may
cause afterimage burn-in or defective pixels.
• Activate power saving mode or a moving-picture screen saver if you will not be
using the product for an extended period of time.
8
Chapter 1. Safety
Disconnect the power cord from the power socket if you do not plan on using the
product for an extended period of time (vacation, etc).
• Dust accumulation combined with heat can cause a re, electric shock or electric
leakage.
Use the product at the recommended resolution and frequency.
• Your eyesight may deteriorate.
Do not hold the product upside-down or move it by holding the stand.
• The product may fall and become damaged or cause an injury.
Looking at the screen too close for an extended period of time can deteriorate your
eyesight.
Do not use humidiers or stoves around the product.
• A re or electric shock may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
• Eye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an extended period
of time as it will become hot.
Store small accessories out of the reach of children.
Exercise caution when adjusting the product angle or stand height.
• Your hand or nger may get stuck and injured.
• Tilting the product at an excessive angle may cause the product to fall and an injury
may result.
Do not place heavy objects on the product.
• Product failure or personal injury may result.
When using headphones or earphones, do not turn the volume too high.
• Having the sound too loud may damage your hearing.
Be careful that children do not place the battery in their mouths when removed from
the remote control. Place the battery in a location that children or infants cannot
reach.
• If children have had the battery in their mouths, consult your doctor immediately.
When replacing the battery, insert it with the right polarity (+, -).
• Otherwise, the battery may become damaged or it may cause re, personal injury or
damage due to leakage of the internal liquid.
Use only the specied standardized batteries, and do not use a new battery and a
used battery at the same time.
• Otherwise, the batteries may be damaged or cause re, personal injury or damage
due to a leakage of the internal liquid.
The batteries (and rechargeable batteries) are not ordinary refuse and must be
returned for recycling purposes. The customer is responsible for returning the used or
rechargeable batteries for recycling.
• The customer can return used or rechargeable batteries to a nearby public recycling
centre or to a store selling the same type of the battery or rechargeable battery.
Storage
Due to the characteristics of high-glossy products, using a UV humidier nearby may
create white-coloured stains on the product.
Contact Customer Service Centre if the inside of the product needs cleaning
(service fee will be charged).
9
Chapter 1. Safety
Cleaning
Exercise care when cleaning as the panel and exterior of advanced mirror glass are
easily scratched.
Take the following steps when cleaning.
1 Power off the product and computer.
2 Disconnect the power cord from the product.
‒ Hold the power cable by the plug and do not touch the cable with wet hands.
Otherwise, an electric shock may result.
3 Wet a soft and dry cloth in water and wring thoroughly.
‒ Do not use detergents that contain alcohol, solvent or surface-active agents.
‒ Do not spray water or detergent directly on the product.
4 Wipe the product with a clean, soft and dry cloth.
5 Connect the power cord to the product when cleaning is nished.
6 Power on the product and computer.
Cleaning the mirror glass
Usable cleaning cloth
(Material)
• Superne bers (Provided accessory: CLOTH-
CLEAN(BN63-01798B))
• 100% cotton
Cleaning solution Water None
Cleaning method Clean with wet cloth rst
and then wipe with dry
cloth
Wipe with dry cloth
Status after cleaning All ngerprints and stains are gone
Deformation or
alteration of the glass
No No
Precautions when handling the panel
Do not stand the product upright on the oor. The panel is fragile and can get
damaged.
Lay the product down to handle it (the packaging can be used).
Ensure you use the handles on the back when moving the product.
Do not hold or grasp any area of the product within 15 mm from the front.
10
Chapter 2. Device setup
Device setup
Installation
What’s Included
• Components may differ in different locations.
• Contact the vendor where you purchased the product if any components are missing.
• The appearance of the components may differ from the images shown.
• A stand is not provided with the product. To install a stand, you can purchase one separately.
• The RS232C adapter can be used to connect to another monitor using the D-SUB (9-pin) type RS232C cable.
+
+
-
-
Quick Setup Guide Warranty card (Not available in
some locations)
Regulatory guide Power cord Batteries (Not available in some
locations)
Remote control RS232C(IN) adapter Proximity sensor Screw (M4L8, 4 pieces) Screw (M3L8, 1 piece)
Cleaning cloth
11
Chapter 2. Device setup
Control panel
The colour and shape of parts may differ from what is shown.
Speaker
Panel key
Power
Panel key
Buttons Description
Press and hold for one second to turn on the display.
Selects a desired item.
If you press the button when the display is turned on,
the control menu will be displayed.
• To exit the OSD menu, press and hold the panel key for
at least one second.
Buttons Description
Move to the upper or lower menu. You can also adjust the
value of an option.
Move to the left or right menu.
• You can adjust the volume by moving the panel key left
or right when the control menu is not displayed.
Control menu
Buttons Description
Source Select the connected input source.
Move the panel key right to select Source, and then press
the panel key. The list of input sources appears. Move the
panel key left or right to select the desired source, and
then press the panel key.
Menu Display the OSD menu.
Move the panel key left to select Menu, and then press
the panel key. The OSD menu appears.
To select a menu, move the panel key up or down, and
then press or move the panel key to the right.
To adjust settings, select the desired menu, and then
press the panel key. Adjust the settings by moving the
panel key left or right.
Home Enter Go to Home mode.
Move the panel key up to select Home, and then press
the panel key.
12
Chapter 2. Device setup
Buttons Description
Power off Turn off the display.
Move the panel key down to select Power off, and then
press the panel key.
Return To return to a previous menu or exit the control menu,
press the panel key.
Remote sensor and spacer logo (optional)
Spacer logo
Remote sensor
Remote sensor
Press a button on the remote control pointing at the sensor on the front of the
product to perform the corresponding function.
• Using other display devices in the same space as the remote control of this product
can cause the other display devices to be inadvertently controlled.
Use the remote control within 7 m to 10 m from the sensor on the product at an angle
of 30° from the left and right.
WARNING
Store used batteries out of reach of children and recycle.
• Do not use a new and used battery together. Replace both batteries at the same
time.
• Remove batteries when the remote control is not to be used for an extended
period of time.
Spacer logo (optional)
Do not pull on the spacer logo using force. The logo may tear or break off.
13
Chapter 2. Device setup
Reverse side
• The colour and shape of parts may differ from what is shown.
IR IN
DVI /
MAGICINFO IN
HDMI IN
DP OUT
DP IN
IR OUT
DVI /
HDMI
AUDIO IN RJ45AUDIO OUT
USB
PROXIMITY
SENSOR
USB
RS232C OUT
RS232C IN
Port Description
RS232C OUT Connects to MDC using an RS232C adapter.
RS232C IN
IR OUT Outputs the remote control signal.
IR IN Receives the remote control signal.
Port Description
USB Connect to a USB memory device.
USB
PROXIMITY SENSOR
Connects to a USB device or proximity sensor.
PROXIMITY SENSOR: This must be connected to the cable
if the Proximity Sensor is in use.
DVI / MAGICINFO IN DVI IN: Connects to a source device using a DVI cable or
HDMI-DVI cable.
MAGICINFO IN: Use the (dedicated) DP-DVI cable when
connecting a network box (sold separately).
DP IN Connects to a source device using a DP cable.
HDMI IN Connects to a source device using an HDMI cable.
DP OUT Connects to another product using a DP cable.
DVI / HDMI AUDIO IN Receives sound from a source device via an audio cable.
AUDIO OUT Connects to the audio of a source device.
RJ45 Connects to MDC using a LAN cable.
14
Chapter 2. Device setup
Proximity sensor
With the Proximity sensor you can choose to have the screen display content when the
sensor detects object.
The colour and shape of parts may differ from what is shown.
PROXIMITY
SENSOR
USB
Detection range
Refer to the image and install accordingly.
15°
15°
Proximity
sensor
Side viewTop view
15° 15°
Proximity
sensor
Maximum detection distance: 1.5 m (However, this distance may vary depending
on the environment, object and existence of any obstacles within the detection
range.)
The sensor cannot detect objects outside of the detection range.
After installing the proximity sensor, go to MENU → System → Proximity sensor, and
then set desired settings.
15
Chapter 2. Device setup
External sensor kit (sold separately)
The external sensor kit is integrated with the remote control sensor and power
indicator. If mounting the display onto a wall, you can move the External sensor kit to
the side of the display.
The colour and shape of parts may differ from what is shown.
IR IN
1
2
No. Parts Description
1Remote
Control
Sensor
Aim the remote control towards this spot.
• Using other display devices in the same space as the
remote control of this product can cause the other
display devices to be inadvertently controlled.
2Power
indicator
The power indicator will turn off when the product is
turned on. It will blink in power saving mode.
Use the remote control within 7 m to 10 m from the sensor on the product at an angle
of 30° from the left and right.
• Store used batteries out of reach of children and recycle.
• Do not use a new and used battery together. Replace both batteries at the same
time.
• Remove batteries when the remote control is not to be used for an extended period
of time.
• If you disconnect the power cord from the product while it is in standby mode, the
product remains in standby mode until it runs out of power. The power indicator
turns on or blinks during this time. If you reconnect the power cord, the input source
activates and the product resumes normal operation.
16
Chapter 2. Device setup
Anti-theft lock
An anti-theft lock allows you to use the product securely even in public places.
The locking device shape and locking method depend on the manufacturer. Refer to
the user manual provided with your anti-theft locking device for details.
The following images are for reference only. Real-life situations may differ from
what is shown in the images.
To lock an anti-theft locking device:
1 Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2 Put one end of the cable through the loop on the other end.
3 Insert the locking device into the anti-theft lock slot at the back of the product.
4 Lock the locking device.
• An anti-theft locking device can be purchased separately.
Anti-theft locking devices can be purchased at electronics retailers or online.
• Refer to the user manual provided with your anti-theft locking device for details.
17
Chapter 2. Device setup
Remote control
• Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
• A button without a description in the image below is not supported on the product.
Remote control button functions may differ for different products.
HOME
MENU
POWER
OFF
VOL
CH
MagicInfo
Player I
.QZ
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
SYMBOL
0
PRS
7
TUV
8
WXY
9
MUTE
DEL-/--
SOURCE
CH LIST
Power off the product.
Number buttons
Enter the password in the OSD menu.
Mute the sound.
Unmuting the sound: Press MUTE again or press the volume
control( + VOL - ) button.
Use this hotkey to directly access MagicInfo.
This hotkey is available when a network box or PIM (Plug In
Module) is connected.
Go to Home Launch Button.
Power on the product.
Adjust the volume.
Change the input source.
Display or hide the onscreen display menu, or return to the
previous menu.
18
Chapter 2. Device setup
TOOLS INFO
SET
UNSET
LOCK
PC
A
DVI
B
HDMI
C
DP
D
EXITRETURN
IR control
Display information about the current input source.
Move to the upper, lower, left or right menu, or adjust an
option’s setting.
Conrm a menu selection.
Exit the current menu.
Manually select a connected input source from DVI, HDMI
or DisplayPort.
Used in Anynet+ mode and multimedia mode.
Quickly select frequently used functions.
Return to the previous menu.
It sets safe lock function.
If multiple products are connected through the Video Wall
feature, press the SET button and enter a product ID using
the number buttons. Control the product using the remote
control.
Cancel a value that has been set using the SET button and
control all connected products using the remote control.
To place batteries in the remote control
19
Chapter 2. Device setup
Connection using an IR Stereo cable (sold separately)
• The appearance may differ depending on the product.
Make sure to connect the external sensor kit while the product is powered off. Then,
power on the product.
Controlling more than one display product using your remote control
• Connect the IR OUT port on the product to the IR IN port on the other display
product using the dedicated stereo cable.
• A command sent from the remote control pointed at product 1 will be received by
both display products 1 and 2 .
IR OUT
IR IN
1 2
Controlling more than one display product using an external sensor kit
• A command sent from the remote control pointed at product 1 (to which the
external sensor kit is connected) will be received by both display products 1 and
2 .
IR OUT
IR IN
IR IN
1 2
20
Chapter 2. Device setup
Guided installation
WARNING
To prevent injury, this apparatus must be securely attached to the oor/wall in
accordance with the installation instructions.
• Ensure that an authorized installation company installs the wall mount.
Otherwise, it may fall and cause personal injury.
• Make sure to install the specied wall mount.
• Contact Samsung Customer Service Centre for further details.
Ventilation
Installation on a perpendicular wall
A
B
Side view
A Minimum 40 mm
B Ambient temperature: Under 35 °C
When installing the product on a perpendicular wall, allow at least 40 mm of space
between the product and wall surface for ventilation and ensure that the ambient
temperature is kept below 35 °C.
Installation on an indented wall
Contact Samsung Customer Service Centre for further details.
A
B
C
E
D D
Side view
Side view
A Minimum 40 mm
B Minimum 70 mm
C Minimum 50 mm
D Minimum 50 mm
E Ambient temperature: Under 35 °C
When installing the product on an indented wall, allow at least the space specied
above between the product and wall for ventilation and ensure that the ambient
temperature is kept below 35 °C.
21
Chapter 2. Device setup
Dimensions
1
2
3 4
5
Unit: mm
Model name 1234 5
ML32E 740.2 698.4 392.85 434.6 57.4
ML55E / ML55E-R 1249.2 1209.6 680.4 720.0 57.4
All drawings are not necessarily to scale. Some dimensions are subject to change
without prior notice.
Refer to the dimensions prior to performing installation of your product. Not
responsible for typographical or printed errors.
Wall mount installation
Preparing before installing wall mount
1
To install a wall mount from another manufacturer, use the Holder-Ring ( 1).
Installing the wall mount
• The wall mount kit (sold separately) allows you to mount the product on the wall.
• For detailed information on installing the wall mount, see the instructions provided
with the wall mount.
• We recommend you contact a technician for assistance when installing the wall
mount bracket.
WARNING
• Samsung Electronics is not responsible for any damage to the product or injury
to yourself or others if you elect to install the wall mount on your own.
22
Chapter 2. Device setup
Wall mount kit specications (VESA)
Install your wall mount on a solid wall perpendicular to the oor. Before attaching the
wall mount to surfaces other than plaster board, please contact your nearest dealer
for additional information.
WARNING
If you install the product on a slanted wall, it may fall and result in severe personal
injury.
A
B
• Samsung wall mount kits contain a detailed installation manual and all parts
necessary for assembly are provided.
• For wall mounts that do not comply with the VESA standard screw specications, the
length of the screws may differ depending on the wall mount specications.
• Standard dimensions for wall mount kits are shown in the table below.
Unit: mm
Model name VESA screw hole specs (A * B) in
millimeters
Standard screw Quantity
ML32E 200.0 mm * 200.0 mm M8 4
ML55E / ML55E-R 400.0 mm * 400.0 mm
WARNING
• Do not fasten the screws too rmly. This may damage the product or cause the
product to fall, leading to personal injury. Samsung is not liable for these kinds
of accidents.
• Samsung is not liable for product damage or personal injury when a non-VESA
or non-specied wall mount is used or the consumer fails to follow the product
installation instructions.
CAUTION
• Always have two people mount the product on a wall.
• Do not use screws that are longer than the standard length or do not comply
with the VESA standard screw specications. Screws that are too long may cause
damage to the inside of the product.
• Do not install your Wall Mount Kit while your product is turned on. It may result
in personal injury due to electric shock.
23
Chapter 2. Device setup
External connection
Checkpoints
• Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to
device.
• Connect the sound ports correctly: left = white and right = red.
• Check the types of ports at the back of the product you want to connect.
The appearance may differ depending on the product.
WARNING
Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
Cable Connection
RS232C Cable
Interface RS232C (9 pins)
Pin TxD (No.2), RxD (No.3), GND (No.5)
Bit rate 9600 bps
Data bits 8 bit
Parity None
Stop bit 1 bit
Flow control None
Maximum length 15 m (only shielded type)
Pin assignment
1 2 3 4 5
6 7 8 9
Pin Signal
1Detect data carrier
2Received data
3Transmitted data
4Prepare data terminal
5Signal ground
6Prepare data set
7Send request
8Clear to send
9Ring indicator
RS232C cable
• Connector: 9-Pin D-Sub to Stereo Cable
1
59
6
-P2-
1
2
3
-P1-
24
Chapter 2. Device setup
-P1- -P1- -P2- -P2-
Female Rx 23Tx STEREO
Tx 32Rx PLUG
Gnd 5—5Gnd (3.5ø)
LAN Cable
Pin assignment
12345678
Pin No Standard Colour Signal
1White and orange TX+
2Orange TX-
3White and green RX+
4Blue NC
5White and blue NC
6Green RX-
7White and brown NC
8Brown NC
Direct LAN cable (PC to HUB)
• Connector : RJ45
RJ45 MDC
HUB
P2 P1
P2
P1
RJ45
Signal P1 P2 Signal
TX+ 11TX+
TX- 22TX-
RX+ 33RX+
RX- 66RX-
Cross LAN cable (PC to PC)
RJ45 P1 P2
Signal P1 P2 Signal
TX+ 13RX+
TX- 26RX-
RX+ 31TX+
RX- 62TX-
25
Chapter 2. Device setup
Connection
• Ensure you connect each of the adapters to the correct RS232C IN or OUT port on
the product.
Connection 1
RS232C
IN OUT
RS232C
IN OUT
RS232C
IN OUT
RS232C
IN OUT
Connection 2
RJ45 RJ45
Connection 3
RS232C
OUT
RJ45 RS232C
IN OUT
RS232C
IN OUT
RS232C
IN OUT
Control Codes
Viewing control state (Get control command)
Header Command ID Data length Checksum
0xAA Command type 0
Controlling (Set control command)
Header Command ID Data
length
Data Checksum
0xAA Command type 1Value
26
Chapter 2. Device setup
Command
No. Command type Command Value range
1Power control 0x11 0~1
2Volume control 0x12 0~100
3Input source control 0x14 -
4Screen mode control 0x18 -
5Screen size control 0x19 0~255
6PIP on/off control 0x3C 0~1
7Auto adjustment control (PC and
BNC only)
0x3D 0
8Video wall mode control 0x5C 0~1
9Safety Lock 0x5D 0~1
10 Video Wall On 0x84 0~1
11 Video Wall User Control 0x89 -
• All communications take place in hexadecimals. The checksum is calculated by
adding up all values except the header. If a checksum adds up to be more than 2
digits as shown below (11+FF+01+01=112), the rst digit is removed.
E.g. Power On & ID=0
Header Command ID Data
length
Data 1 Checksum
0xAA 0x11 1"Power"
Header Command ID Data
length
Data 1 12
0xAA 0x11 1 1
• To control all devices connected by a serial cable simultaneously irrespective of IDs,
set the ID as “0xFE” and transmit commands. Commands will be executed by each
device but ACK will not respond.
Power control
Function
• A product can be powered on and off using a PC.
Viewing power state (Get Power ON / OFF Status)
Header Command ID Data length Checksum
0xAA 0x11 0
Setting power ON/Off (Set Power ON / OFF)
Header Command ID Data
length
Data Checksum
0xAA 0x11 1“Power”
“Power”: Power code to be set on a product.
• 1: Power ON
• 0: Power OFF
27
Chapter 2. Device setup
Ack
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'A' 0x11 "Power"
“Power”: Power code to be set on a product.
Nak
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'N' 0x11 "ERR"
“ERR” : A code showing what error has occurred.
Volume control
Function
• The volume of a product can be adjusted using a PC.
Viewing volume state (Get Volume Status)
Header Command ID Data length Checksum
0xAA 0x12 0
Setting the volume (Set Volume)
Header Command ID Data
length
Data Checksum
0xAA 0x12 1“Volume”
“Volume”: Volume value code to be set on a product. (0-100)
Ack
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'A' 0x12 “Volume”
“Volume”: Volume value code to be set on a product. (0-100)
Nak
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'N' 0x12 "ERR"
“ERR” : A code showing what error has occurred.
Input source control
Function
• The input source of a product can be changed using a PC.
Viewing input source state (Get Input Source Status)
Header Command ID Data length Checksum
0xAA 0x14 0
28
Chapter 2. Device setup
Setting the input source (Set Input Source)
Header Command ID Data
length
Data Checksum
0xAA 0x14 1“Input Source”
“Input Source”: An input source code to be set on a product.
0x14 PC
0x18 DVI
0x0C Input source
0x08 Component
0x20 MagicInfo
0x1F DVI_video
0x30 RF(TV)
0x40 DTV
0x21 HDMI1
0x22 HDMI1_PC
0x23 HDMI2
0x24 HDMI2_PC
0x25 DisplayPort
DVI_video, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They
only respond to “Get” commands.
• This model does not support HDMI1, HDMI1_PC, HDMI2 and HDMI2_PC ports.
• MagicInfo is only available with models that contain the MagicInfo function.
• RF(TV), DTV are only available with models that include a TV.
Ack
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'A' 0x14 “Input
Source”
“Input Source”: An input source code to be set on a product.
Nak
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'N' 0x14 "ERR"
“ERR” : A code showing what error has occurred.
Screen mode control
Function
• The screen mode of a product can be changed using a PC.
• Screen mode cannot be controlled when the Video Wall function is enabled.
• This control can only be used on models that include a TV.
Viewing screen status (Get Screen Mode Status)
Header Command ID Data length Checksum
0xAA 0x18 0
Setting the picture size (Set Picture Size)
Header Command ID Data
length
Data Checksum
0xAA 0x18 1“Screen Mode”
“Screen Mode”: A code that sets the product status
29
Chapter 2. Device setup
0x01 16 : 9
0x04 Zoom
0x31 Wide Zoom
0x0B 4 : 3
Ack
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'A' 0x18 “Screen
Mode”
“Screen Mode”: A code that sets the product status
Nak
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'N' 0x18 "ERR"
“ERR” : A code showing what error has occurred.
Screen size control
Function
• The screen size of a product can be changed using a PC.
Viewing the screen size (Get Screen Size Status)
Header Command ID Data length Checksum
0xAA 0x19 0
Ack
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'A' 0x19 “Screen
Size”
“Screen Size”: product screen size (range: 0 – 255, unit: inch)
Nak
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'N' 0x19 "ERR"
“ERR” : A code showing what error has occurred.
PIP On/Off control
Function
• The PIP mode of a product can be turned on or off using a PC.
• Only available on models that have the PIP function.
• The mode cannot be controlled if Video Wall is set to On.
• This function is not available in MagicInfo.
Viewing PIP on/off state (Get the PIP ON / OFF Status)
Header Command ID Data length Checksum
0xAA 0x3C 0
30
Chapter 2. Device setup
Setting PIP on/off (Set the PIP ON / OFF)
Header Command ID Data
length
Data Checksum
0xAA 0x3C 1“PIP”
“PIP”: A code used to turn the PIP mode of a product on or off
• 1: PIP ON
• 0: PIP OFF
Ack
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'A' 0x3C “PIP”
“PIP”: A code used to turn the PIP mode of a product on or off
Nak
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'N' 0x3C "ERR"
“ERR” : A code showing what error has occurred.
Auto adjustment control (PC and BNC only)
Function
• Automatically adjust the PC system screen using a PC.
Viewing auto adjustment state (Get Auto Adjustment Status)
• None
Setting auto adjustment (Set Auto Adjustment)
Header Command ID Data
length
Data Checksum
0xAA 0x3D 1“Auto
Adjustment”
“Auto Adjustment” : 0x00 (at all times)
Ack
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'A' 0x3D “Auto
Adjustment”
Nak
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'N' 0x3D "ERR"
“ERR” : A code showing what error has occurred.
Video Wall Mode Control
Function
• Video Wall mode can be activated on a product using a PC.
• This control is only available on a product whose Video Wall is enabled.
Viewing video wall mode (Get Video Wall Mode)
Header Command ID Data length Checksum
0xAA 0x5C 0
31
Chapter 2. Device setup
Setting the video wall (Set Video Wall Mode)
Header Command ID Data
length
Data Checksum
0xAA 0x5C 1“Video Wall
Mode”
“Video Wall Mode”: A code used to activate Video Wall mode on a product
• 1: Full
• 0: Natural
Ack
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'A' 0x5C “Video Wall
Mode”
“Video Wall Mode”: A code used to activate Video Wall mode on a product
Nak
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'N' 0x5C "ERR"
“ERR” : A code showing what error has occurred.
Safety Lock
Function
• PC can be used to turn the Safety Lock function on or off on a product.
• This control is available regardless of whether or not the power is turned on.
Viewing the safety lock state (Get Safety Lock Status)
Header Command ID Data length Checksum
0xAA 0x5D 0
Enabling or disabling safety lock (Set Safety Lock Enable / Disable)
Header Command ID Data
length
Data Checksum
0xAA 0x5D 1“Safety Lock”
“Safety Lock”: Safety lock code to be set on a product
• 1: ON
• 0: OFF
Ack
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'A' 0x5D “Safety Lock”
“Safety Lock”: Safety lock code to be set on a product
Nak
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'N' 0x5D "ERR"
“ERR” : A code showing what error has occurred.
32
Chapter 2. Device setup
Video Wall On
Function
• Turn Video Wall on or off on the product from your computer.
Get Video Wall On/Off Status
Header Command ID Data length Checksum
0xAA 0x84 0
Set Video Wall On/Off
Header Command ID Data
length
Data Checksum
0xAA 0x84 1V.Wall_On
V.Wall_On: Video Wall code to be assigned to the product
• 1: Video Wall ON
• 0: Video Wall OFF
Ack
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'A' 0x84 V.Wall_On
V.Wall_On : Same as above
Nak
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'N' 0x84 "ERR"
“ERR” : A code showing what error has occurred.
Video Wall User Control
Function
• Turn the Video Wall function on or off on the product from your computer.
Get Video Wall Status
Header Command ID Data length Checksum
0xAA 0x89 0
Set Video Wall
Header Command ID Data
length
Val1 Val2 Checksum
0xAA 0x89 2Wall_Div Wall_SNo
Wall_Div: Video Wall Divider code assigned to the product
10x10 Video Wall Model
12345678910 11 12 13 14 15
Off 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
10x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F
20x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F
30x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x3A 0x3B 0x3C 0x3D 0x3E 0x3F
40x41 0x42 0x43 0x44 0x45 0x46 0x47 0x48 0x49 0x4A 0x4B 0x4C 0x4D 0x4E 0x4F
50x51 0x52 0x53 0x54 0x55 0x56 0x57 0x58 0x59 0x5A 0x5B 0x5C 0x5D 0x5E 0x5F
60x61 0x62 0x63 0x64 0x65 0x66 0x67 0x68 0x69 0x6A 0x6B 0x6C 0x6D 0x6E 0x6F
70x71 0x72 0x73 0x74 0x75 0x76 0x77 0x78 0x79 0x7A 0x7B 0x7C 0x7D 0x7E N/A
80x81 0x82 0x83 0x84 0x85 0x86 0x87 0x88 0x89 0x8A 0x8B 0x8C N/A N/A N/A
90x91 0x92 0x93 0x94 0x95 0x96 0x97 0x98 0x99 0x9A 0x9B N/A N/A N/A N/A
10 0xA1 0xA2 0xA3 0xA4 0xA5 0xA6 0xA7 0xA8 0xA9 0xAA N/A N/A N/A N/A N/A
11 0xB1 0xB2 0xB3 0xB4 0xB5 0xB6 0xB7 0xB8 0xB9 N/A N/A N/A N/A N/A N/A
33
Chapter 2. Device setup
12345678910 11 12 13 14 15
12 0xC1 0xC2 0xC3 0xC4 0xC5 0xC6 0xC7 0xC8 N/A N/A N/A N/A N/A N/A N/A
13 0xD1 0xD2 0xD3 0xD4 0xD5 0xD6 0xD7 N/A N/A N/A N/A N/A N/A N/A N/A
14 0xE1 0xE2 0xE3 0xE4 0xE5 0xE6 0xE7 N/A N/A N/A N/A N/A N/A N/A N/A
15 0xF1 0xF2 0xF3 0xF4 0xF5 0xF6 N/A N/A N/A N/A N/A N/A N/A N/A N/A
• Wall_SNo: Product Number code assigned to the product
10x10 Video Wall Model : (1 ~ 100)
Set Number Data
10x01
20x02
... ...
99 0x63
100 0x64
Ack
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Val2 Checksum
0xAA 0xFF 3'A' 0x89 Wall_
Div
Wall_
SNo
Nak
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3'N' 0x89 "ERR"
“ERR” : A code showing what error has occurred.
PC connection
• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device rst before connecting the power cable.
• A PC can be connected to the product in a variety of ways.
Select a connection method suitable for your PC.
• Connecting parts may differ in different products.
Connection using a DVI cable (Digital type)
The appearance may differ depending on the product.
DVI /
MAGICINFO IN
DVI / HDMI
AUDIO IN
34
Chapter 2. Device setup
You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter.
HDMI
DVI /
MAGICINFO IN
Connection using an HDMI-DVI cable
The appearance may differ depending on the product.
After connecting a computer to the product with an HDMI-DVI cable, make sure
to congure the settings as shown below to enable the video and audio from the
computer.
• Sound → set HDMI Sound to PC(DVI)
• Picture → set each screen mode to Text under Picture Mode
• System → General → set HDMI Hot Plug to Off
HDMI IN
DVI / HDMI
AUDIO IN
35
Chapter 2. Device setup
Connection using an HDMI cable
The appearance may differ depending on the product.
HDMI IN
Connection using an DP cable
The appearance may differ depending on the product.
DP IN
Precautions for using DP
• To increase the standby power capacity, the product stops DP communication when
it is turned off or in power saving mode.
If the product in dual monitor mode is turned off or goes into power saving mode,
monitor setting changes may not be updated. As a result, screen output may not be
displayed properly.
In the occurrence of this issue, set Max. Power Saving to Off before using the
product.
• Some graphics cards that are not compliant with the DP standard may prevent the
Windows Booting/Bios screen from being displayed when the product is in power
saving mode. If this is the case, make sure to turn on the product rst before turning
on your PC.
• The DisplayPort interface (DP IN) on the product and the provided DP cable are
designed based on the VESA standards. Using a DP cable that is not VESA compliant
may cause the product to function improperly. Samsung Electronics shall not be
held responsible for any issues from using a cable that is not VESA compliant.
Make sure to use a DP cable that is VESA compliant.
36
Chapter 2. Device setup
AV connection
• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device rst before connecting the power cable.
• You can connect a video device to the product using a cable.
‒ Connecting parts may differ in different products.
‒ Press the SOURCE button on the remote control to change the source.
Connection using an HDMI-DVI cable
The appearance may differ depending on the product.
• Audio will not be enabled if the product is connected to a video device using an
HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio
ports on the product and video device.
• After connecting a video device to the product with an HDMI-DVI cable, make sure to
congure the settings as shown below to enable the video and audio from the video
device.
‒ Sound → set HDMI Sound to AV(HDMI)
‒ Picture → set each screen mode to Videos/Images under Picture Mode
‒ System → General → set HDMI Hot Plug to On
• Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.
HDMI IN
DVI / HDMI
AUDIO IN
DVI /
MAGICINFO IN
HDMI
37
Chapter 2. Device setup
Connection using an HDMI cable (up to 1080p)
The appearance may differ depending on the product.
• For better picture and audio quality, connect to a digital device using an HDMI cable.
• An HDMI cable supports digital video and audio signals, and does not require an
audio cable.
‒ To connect the product to a digital device that does not support HDMI output, use
an HDMI-DVI and audio cables.
• The picture may not display normally (if at all) or the audio may not work if an
external device that uses an older version of HDMI mode is connected to the
product. If such a problem occurs, ask the manufacturer of the external device about
the HDMI version and, if out of date, request an upgrade.
• Be sure to use an HDMI cable with a thickness of 14 mm or less.
• Be sure to purchase a certied HDMI cable. Otherwise, the picture may not display
or a connection error may occur.
• A basic high-speed HDMI cable or one with ethernet is recommended.
This product does not support the ethernet function via HDMI.
HDMI IN
Audio system connection
• The appearance may differ depending on the product.
• Connecting parts may differ in different products.
AUDIO OUT
38
Chapter 2. Device setup
LAN connection
• The appearance may differ depending on the product.
• Connecting parts may differ in different products.
Use Cat7(*STP Type) cable for the connection.
• *Shielded Twist Pair.
RJ45
Source selection
Source
SOURCE → Source
Source allows you to select a variety of sources and change source device names.
You can display the screen of a source device connected to the product. Select a
source from source list to display the screen of the selected source.
• The input source can also be changed by using the SOURCE button on the remote
control.
• The screen may not display correctly if an incorrect source is selected for the source
device you want to convert to.
• To view detailed information about connected source devices, press the TOOLS
button from the Source page.
• The MagicIWB S software allows you to play a variety of content on a large
touchscreen monitor. Use the software to bring life to your meetings and
conferences.
Refer to the touch overlay user manual for details.
The MagicIWB S user manual can be downloaded from http://www.samsung.com/
displaysolutions.
Edit Name
SOURCE → Source → TOOLS → Edit Name →
Customize the name of a connected external device.
• The list can include the following source devices. Source devices on the list differ
depending on the selected source.
PC / Cable STB / Satellite STB / PVR STB / Game / Blu-ray / DVD / VCR / AV
Receiver / Camcorder / DVI PC / DVI Devices / TV / IPTV / HD DVD / DMA
Information
SOURCE → Source → TOOLS → Information →
You can see detailed information about the selected external device.
39
Chapter 3. PC software (Multiple Display Control)
PC software (Multiple Display Control)
Multiple display control “MDC” is an application that allows you to easily control
multiple display devices simultaneously using a PC.
For details on how to use the MDC programme, refer to Help after installing the
programme. The MDC programme is available on the website.
Installation/uninstallation
Installation
• MDC installation can be affected by the graphics card, mother board and network
conditions.
1 Click the MDC Unied installation programme.
2 Select a language for installation. Next, click “OK”.
3 When the “Welcome to the InstallShield Wizard for MDC_Unied” screen appears,
click “Next”.
4 In the “License Agreement” window displayed, select “I accept the terms in the
license agreement” and click “Next”.
5 In the displayed “Customer Information” window, ll out all the information elds
and click “Next”.
6 In the displayed “Destination Folder” window, select the directory path you want to
install the programme in and click “Next”.
‒ Ifthedirectorypathisnotspecied,theprogrammewillbeinstalledinthe
default directory path.
7 In the displayed “Ready to Install the Program” window, check the directory path to
install the programme in and click “Install”.
8 Installation progress will be displayed.
9 Click “Finish” in the displayed “InstallShield Wizard Complete” window.
‒ Select “Launch MDC Unied” and click “Finish” to run the MDC programme
immediately.
10 The MDC Unied shortcut icon will be created on the desktop after installation.
‒ The MDC execution icon may not be displayed depending on the PC system or
productspecications.
‒ Press F5 if the execution icon is not displayed.
Uninstallation
Select Settings > Control Panel on the Start menu and double-click Add/Delete
Program.
Select MDC Unied from the list and click Change/Remove.
40
Chapter 3. PC software (Multiple Display Control)
Connection
Using the RS-232C cable
The appearance may differ depending on the product.
An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
RS232C IN RS232C OUT
RS232C IN
RS232C IN
RS232C OUT
Monitor 1
Monitor 2
Computer
Using the ethernet cable
Enter the IP for the primary display device and connect the device to the PC. Display
devices can be connected to each other using a LAN cable.
Connection using a direct LAN cable
The appearance may differ depending on the product.
Multiple products can be connected using the RJ45 port on the product and the LAN
ports on the HUB.
RJ45
Monitor 1
Monitor 2
Computer
HUB
41
Chapter 3. PC software (Multiple Display Control)
Connection using a cross LAN cable
The appearance may differ depending on the product.
Multiple products can be connected using the RS232C IN / OUT port on the product.
RS232C OUTRJ45
RS232C IN
RS232C OUT
RS232C IN
Monitor 1
Monitor 2
Computer
42
Chapter 4. Home screen
Home screen
Player
HOME → Player →
Player
Play a variety of content, such as
scheduled channels, templates or files.
Clone Product
Picture Mode
ID Settings
On/Off Timer
Video Wall
Ticker
Network Status
More settings
Schedule Template
• To use the Player feature, set Play via to MagicInfo in System.
• The displayed image may differ depending on the model.
Play a range of content such as channels with schedules assigned, templates or les.
Play channels or content using any of the following methods.
• Network Channel: Play content using the server.
To run Network Channel, make sure the product is connected to the server.
• Local Channel: Play content in internal memory or from external memory.
Approving a connected device from the server
Approving the Lite server
Set MagicInfo Mode to Lite in Server Network Settings.
Approve and use the Lite server now.
First congure Server Network Settings before device approval.
1 Access the server you have assigned to your device.
2 Enter your ID and password to log in.
3 Select Device from the top menu bar.
4 Select Lite from the menus on the left.
43
Chapter 4. Home screen
5 Select Unapproved from the sub-menus of Lite.
6 Select the Approve button for your device from the list of unapproved Lite devices.
7 Enter the information required to approve the device.
Device Name: Enter the device name.
Device Group: Select to specify the group.
Location: Enter the current location of the device.
Pressing the INFO button on the remote when a network schedule is running
will display the details of the schedule. Check that the correct device has been
selected by viewing the device ID in the details.
8 Select the All menu to check that the device has been registered.
9 When the device is approved by the server, the schedule registered in the
selected group will be downloaded to the device. The schedule will run after it is
downloaded.
•
user’s manual”.
• If a device is deleted from the list of devices approved by the server, the device
will reboot to reset its settings.
44
Chapter 4. Home screen
Setting the current time
A schedule may not run if the time set on the device is different from the server’s
current time.
1 Go to the tabs Device → Time.
2 Select your device.
3 Select Clock Set, and sync the time with the server.
The time on the product can be changed from the server.
Turning the product off and then on again will restore the time setting on the
product to the last time that was set from the server.
• For further details on how to manage the time (scheduling, holiday
Approving the Premium server
Set MagicInfo Mode to Premium in Server Network Settings.
Approve and use the Premium server now.
First congure Server Network Settings before device approval.
1 Access the server you have assigned to your device.
2 Enter your ID and password to log in.
3 Select Device from the top menu bar.
4 Select Premium from the menus on the left.
45
Chapter 4. Home screen
5 Select Unapproved from the sub-menus of Premium.
6 Select the Approve button for your device from the list of unapproved Premium
devices.
7 Enter the information required to approve the device.
Device Name: Enter the device name.
Device Group: Select to specify the group.
Location: Enter the current location of the device.
Pressing the INFO button on the remote when a network schedule is running
will display the details of the schedule. Check that the correct device has been
selected by viewing the device ID in the details.
8 Select the All menu to check that the device has been registered.
9 When the device is approved by the server, the schedule registered in the
selected group will be downloaded to the device. The schedule will run after it is
downloaded.
•
user’s manual”.
• If a device is deleted from the list of devices approved by the server, the device
will reboot to reset its settings.
46
Chapter 4. Home screen
Setting the current time
A schedule may not run if the time set on the device is different from the server’s
current time.
1 Go to the tabs Device → Time.
2 Select your device.
3 Select Clock Set, and sync the time with the server.
The time on the product can be changed from the server as shown in step 3.
Turning the product off and then on again will restore the time setting on the
product to the last time that was set from the server.
• For further details on how to manage the time (scheduling, holiday
Network Channel
Player Device : All Content : All Sort by : File Name Options
1 / 4 item(s)
Browse and play content stored on the selected device.
No channels
No channels
Network Channel
Local Channel
My Templates
Play content, templates and schedules congured on the server.
• You can view whether the server is connected (approval) in the Player menu screen.
To view whether the server is connected when a Network Channel is running, press
INFO on the remote.
1 Select Network Channel from the Player menu.
The No channels message appears if no channel has been registered in Network
Channel.
2 Network Channel will run.
Local Channel
Play a schedule or channel that was congured in the product.
1 Select Local Channel from the Player menu.
The No channels message appears if no channel has been registered in Local
Channel.
2 Local Channel will run.
47
Chapter 4. Home screen
My Templates
Play a template in My Templates stored in the internal memory of the product.
Available features in the Player page
The Player list page provides the following features.
• Device
Select either Internal or USB to search for a desired device list.
All / Internal / USB
• Content
Select a content type as criterion to search for a desired content list.
All / Video / Image / PDF / Flash / Ofce / My Templates
• Sort by
Specify the content sort criterion.
File Name / Recently Played
• Options
Option name Operations
Play Selected Select and play desired content.
Send Copy content to another storage device.
Delete Delete desired content.
Settings Congure detailed properties of content.
• See the following page for details on the Settings
feature.
Setting the Player page
Settings
Default Storage
Picture Size
Display Duration
Transition Effect
Content Orientation
Internal
Random
Landscape
Select the storage location that you want to download scheduled channels
from the network to.
Close
The displayed image may differ depending on the model.
Default Storage
Select the storage location that you want to download scheduled channels from the
network to.
• Internal / USB
Picture Size
Set the screen size for content.
If Picture Size is set to Video or Image:
• Full Screen / Original Size / Screen Fit
If Picture Size is set to PDF or Ofce:
• Full Screen / Original Size
This feature is only available for Video, Image, PDF and Ofce les.
Display Duration
Set the duration for each page in a slideshow.
This feature is only available for Image, PDF, Flash and Ofce les.
48
Chapter 4. Home screen
Transition Effect
Congure transition effects between pages or scenes in a slideshow or video le.
• None / Fade1 / Fade2 / Blind / Spiral / Checker / Linear / Stairs / Wipe / Random
This feature is only available for Image les.
Content Orientation
Switch the orientation of playing content to Landscape or Portrait mode.
• Landscape / Portrait
If Content Orientation is Portrait view, it does not support VP8 video codec.
Source is not available when Content Orientation is set to Portrait.
Default content
This default content will be displayed if you run a channel while no Programmes are
scheduled on the channel.
• None / My Templates
Safely Remove
Safely removes USB memory.
Reset
Restore all the values under Settings to the default when the product was purchased.
When content is running
Viewing the details of the content that is running
Information
Current time:
Type:
CH Number:
CH Name:
Software Version:
No Schedule to download
00:00am
Network Channel
No channels selected
No channels selected
DTP-EP-APP-5402-03-Hijack
OK
The displayed image may differ depending on the model.
Press the INFO button on the remote control.
• Current Time
• Type: Type of channel currently playing
Only applicable during Network Channel / Local Channel playback.
• CH Number: Number assigned to the channel currently playing
Only applicable during Network Channel / Local Channel playback.
• CH Name: Name of the channel currently playing
Only applicable during Network Channel / Local Channel playback.
• Software Version: Displays the software version of a device
• MAC ID
• Tags: Tag settings assigned to a device from the server
Only applicable during Network Channel / Local Channel playback.
49
Chapter 4. Home screen
• Server: Displays the connection status (Connected, Not connected or Not approved)
of the server
• USB: Displays the connection status of a USB device
Changing the settings for the content that is running
Music
Playlist Picture Mode Sound Mode Repeat
• The displayed image may differ depending on the model.
• This feature is not available when content is playing through Video Wall.
Press the TOOLS button on the remote control during content playback to congure
settings such as Picture Mode and Sound Mode.
• Playlist
View a list of content items currently playing.
• Music
Set the background music for the content currently playing.
• Picture Mode
Customizes the screen settings for the content currently playing
Shops & Mall / Ofces & School / Terminals & Station / Video Wall / Calibration
• Sound Mode
Customizes the audio settings for the content currently playing
Standard / Music / Movie / Clear Voice / Amplify
File formats compatible with Player
•
•
cannot be played.
•
• Check the supported video and audio Codec types and Versions.
•
• Only the last USB device that was connected is recognized.
Network Schedule Multiframe
Playback restrictions
• Video) can be played simultaneously.
•
• Flash
• For OfcePDF
time.
•
Sound output restrictions
•
• Playback priority: Flash
frame selected by the user
schedule.
TOOLS button is pressed during Player playback.
creating a server schedule.
50
Chapter 4. Home screen
Template les and LFD(.lfd) les
Restrictions
• Ensure a distributed folder (content / schedules) exists in Internal / USB memory.
Playback restrictions
• Video
• Flash
• For OfcePDF
time.
•
simultaneously.
Sound output restrictions
•
• Playback priority: Flash
frame selected by the user
51
Chapter 4. Home screen
Contents
File extension Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Audio Codec
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.mov
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.v
*.vob
*.svi
*.m2ts
*.mts
*.divx
AVI
MKV
ASF
MP4
3GP
VRO
VOB
PS
TS
DivX 3.11 / 4.x / 5.x /
6.x
1920 x 1080 6~30 30 AC3
LPCM
AAC
HE-AAC
WMA
DD+
MPEG(MP3)
DTS Core
G.711(ALaw,μ-Law)
MPEG4 SP / ASP
H.264 BP / MP / HP
Motion JPEG
Window Media Video
v9
MPEG2
MPEG1
VP6 640 x 480 4
52
Chapter 4. Home screen
Video
• 3D video is not supported.
•
not supported.
•
above can cause choppy video during playback.
• Video content will not play, or not play correctly, if there is an error in the content or
the container.
• Some USB/digital camera devices may not be compatible with the player.
•
•
•
•
•
•
•
following conditions:
The resolution is different from that of the monitor
The frequency is different from that of the monitor
Audio
•
above can cause choppy audio during playback.
•
the container.
• Some USB/digital camera devices may not be compatible with the player.
•
•
Image
•
•
•
• Supported image effects : 9 effects (Fade1, Fade2, Blind, Spiral, Checker, Linear,
Stairs, Wipe, Random)
Flash
•
•
•
CAUTION
• Performance comparable to Flash Player on a Windows operating system cannot
be guaranteed.
• Optimization is needed during content creation
• Flash Video
Video
Screen Video is not supported
Power Point
•
Extension : ppt, pptx
53
Chapter 4. Home screen
• Functions not supported
Header and footer (some subitems are not supported)
Object insertion
Half-width characters
Letter spacing
Charts
Vertical text
Some subitems are not supported
Slide notes and handout
PDF
•
Extension : pdf
• Functions not supported
Content less than 1 pixel not supported because of performance degradation
issue.
3D Shadow Effects not supported.
Some characters not supported (Special characters may be corrupted)
WORD
•
Extension : .doc, .docx
• Functions not supported
Page background effect
Some paragraph styles
Charts
Half-width characters
Letter spacing
Vertical text
Some subitems are not supported
Slide notes and handout
Template les
• Creation/editing/playback are only available in Template.
LFD
• Supported in Network Channel and Local Channel
•
Extension : .lfd
54
Chapter 4. Home screen
File formats compatible with Video Wall
•
Restrictions
Available Available Not available
•
Video
• 3D video is not supported.
•
not supported.
•
above can cause choppy video during playback.
• Video content will not play, or not play correctly, if there is an error in the content or
the container.
• Some USB/digital camera devices may not be compatible with the player.
•
•
•
•
•
• Some codecs may not be supported in portrait playback mode.
Image
•
•
55
Chapter 4. Home screen
Schedule
HOME → Schedule →
[CH1]Channel 1 [CH2]Channel 2 [CH3]Channel 3
12:00 am
12:30 am
01:00 am
01:30 am
02:00 am
02:30 am
03:00 am
03:30 am
04:00 am
04:30 am
05:00 am
05:30 am
06:00 am
Add content to
create a programme
on the channel.
Configure the display
duration to set how
long each item of
content will play for.
Set a start time and
a stop time for the
programme.
Playing Time
OptionsType : Local Device : Internal
Schedule your content on a local channel or edit existing channels.
Schedule
+ Add Programme Schedule your content
on CH 2.
Schedule your content
on CH 3.
Available features in the Schedule page
The Schedule page provides the following features.
• Type
Local
Network
• Device
Display the name of a connected storage device.
This option only activates if Type is set to Local in Device.
• Options
Option name Operations
Send Send congured schedules to another storage device.
This is similar to the “copy” feature on PCs.
Delete Delete schedules.
Conguring channel schedules
Play media content such as videos, photos and music at a desired time.
1 Select a channel to congure.
2 Select video, music and photo content you want to apply to the channel schedule.
3 Set the time to play the schedule. (Start Time ~ Stop Time)
4 Change the channel schedule name, and then select a destination folder to save to.
5 Press the Save button.
Only applicable when Type is set to Local.
Editing a channel schedule
Change settings for a congured channel schedule such as content, the duration and
the schedule name.
1 Select a channel to edit.
2 Select video, photo or music content to edit in the channel schedule.
Deleting content: Place the cursor over the desired content and then press the
button to delete it.
+ button to add content or
change the playback order of content items.
3 Set the time to play the schedule. (Start Time ~ Stop Time)
4 Change the channel schedule name, and then select a destination folder to save to.
5 Press the Save button.
Only applicable when Type is set to Local.
56
Chapter 4. Home screen
Template
HOME → Template →
Market : All Orientation : Landscape
1 / 64 item(s)
Select a template to customise.
Template
My Templates
The displayed image may differ depending on the model.
Available features in the Template page
Create unique content using templates. It is easy to create content. Simply change
images and text in a template.
Sort the template list using the following criteria.
• Market
• Orientation
Landscape: Select this mode when using the product in landscape orientation.
Portrait: Select this mode when using the product in portrait orientation.
New town
interior design
Sustainble evolution unfolods tomorrw’s design
bg_co...
Background Screen Background Music
Select in the editable zone to add content or edit the existing text.
Create Template
Preview
Save
Cancel
1 Select a template from the provided sample templates.
2 Organize a template by inserting text, video, photo, or PDF les as desired.
57
Chapter 4. Home screen
Entering text
New town
interior design
Sustainble evolution unfolods tomorrw’s design
bg_co...
Aa
Background Screen Background Music
Select in the editable zone to add content or edit the existing text.
Press the volume button on the remote to
change the font size.
Create Template
Preview
Save
Edit Text
Font options
Cancel
Edit Text
Select the Edit Text window to enter text.
Font options
• Font Size: Specify the text size for the message.
• Font Colour: Specify the text colour for the message.
• Background Colour: Specify the background colour for the message.
• Background Opacity: Specify the background transparency for the message.
• Alignment: Select a message alignment mode.
• Scroll: Specify the scroll direction/speed for the message.
• Hide Element: Display or hide a message.
Selecting Hide does not reset the message settings.
• ResetFont options to default settings.
Inserting content such as videos, photos and PDF les
picture1.jpg
Edit
Default content duration
Hide Element Show Aspect Ratio
Mute
Item(s) selected
Select item to delete
Select in the editable zone to add content or edit the existing text.
Create Template
Done Cancel
00:00:05
Conguring the background image/background music
.. bg_common_02.jpg bg_common_04.jpg bg_common_06.jpg bg_common_10.jpg
bg_commo
bg_common_03.jpgbg_common_01.jpg bg_common_05.jpg bg_common_07.jpg bg_common_11.jpg
bg_commo
Background Screen Device : All
Done Cancel
Select in the editable zone to add content or edit the existing text.
Create Template
58
Chapter 4. Home screen
Preview
New town
interior design
Sustainble evolution unfolods tomorrw’s design
Template preview is running. It will stop after
20 seconds.
1 Preview the created template using the Preview feature.
2 To save the template, press the Save button.
Save
Duration
Template Name
Storage
23:59:59
Template01
Internal
Save Cancel
3 Congure Template Name and Storage.
4 Press the Save button to nish creating the content.
Clone Product
HOME → Clone Product →
Export settings on the product to an external storage device. You can also import
settings from an external storage device.
This option is useful when assigning the same settings to several products.
When a duplicate le is not found on the external storage
device
1 Connect the external storage device, then run the Clone Product function.
2 The No cloning le found on the external storage device. Export this device’s
settings to the external storage device? message appears.
When a duplicate le is found on the external storage device
1 Connect the external storage device, then run the Clone Product function.
2 The Cloning le found. Please select an option. message appears.
Run the Import from External Storage or Export to External Storage function.
Import from External Storage: Copy settings saved on an external storage device
to the product.
Export to External Storage: Copy settings on the product to an external storage
device.
After conguration is complete, the product is rebooted automatically.
59
Chapter 4. Home screen
ID Settings
HOME → ID Settings →
Assign an ID to a set.
Device ID
Enter the ID number of the product connected to the input cable for input signal
reception. (Range: 0~224)
• .
• Enter the number you want using the number buttons on the remote control.
Device ID Auto Set
This feature automatically allots an ID number to a device connected via an RS232C
cable.
When multiple devices are connected, enable the feature on either the rst or last
device.
PC Connection Cable
Select a method to connect to MDC to receive the MDC signal.
• RS232C cable
• RJ-45 (LAN)
DisplayPort Daisy Chain
Video Wall
HOME → Video Wall →
Assign an ID to a set.
Customize the layout of multiple displays that are connected to form a video wall.
In addition, display part of a whole picture or repeat the same picture on each of the
connected multiple displays.
To display multiple images, refer to MDC Help or the MagicInfo user manual. Some
models may not support the MagicInfo function.
Apply to
• Current Source
video wall features for the screen output from an external device connected to the
product.
• MagicInfo Player S
content saved on a USB memory or SD card.
Restrictions
Playback may be initially choppy if video les of different resolutions play successively
(i.e., 1280x720 content plays after 1920x1080 content) or an image le and a video le
play one after the other.
Video
• Supported resolution
• HEVC and 3D images are not supported.
Image
•
• Supported maximum resolution
60
Chapter 4. Home screen
Video Wall
You can activate or deactivate Video Wall.
To organize a video wall, select On.
• Off / On
Horizontal x Vertical
This feature automatically splits a video wall display based on a video wall matrix
conguration.
Enter the video wall matrix.
The video wall display is split based on the congured matrix. The number of vertical
or horizontal display devices can be set within the range 1 and 15.
A video wall display can be split into a maximum of 100 screens.
The Horizontal x Vertical option is only enabled when Video Wall is set to On.
Screen Position
To rearrange split screens, adjust the number for each product in the matrix using the
Screen Position feature.
Selecting Screen Position will display the video wall matrix with the numbers
assigned to the products that form the video wall.
To rearrange products, use the direction buttons on the remote control to move a
product to another desired number. Press the button.
• All Displays
video wall for individual displays.
• Current Displays
Screen Position allows you to split the screen into a maximum of 100 views (15x15).
The maximum number of views that can be split when products are connected via DP
Loopout is also 100.
• The Screen Position option is only enabled when Video Wall is set to On.
• To use the function, make sure Horizontal x Vertical
Format
Select how to display images on the video wall display.
• Full: Display images in full screen with no margin.
• Natural: Display images in the original aspect ratio without enlarging or reducing
the size.
The Format option is only enabled when Video Wall is set to On.
Network Status
HOME → Network Status →
Check the current network and Internet connection.
61
Chapter 4. Home screen
Picture Mode
HOME → Picture Mode →
Select a picture mode (Picture Mode) suitable for the environment where the product
will be used.
Video/Image mode improves the picture quality of the video device. Text mode
improves the picture quality of the computer.
• Shop & Mall
Suitable for shopping malls.
Select either Video/Image or Text depending on the picture mode.
• Ofce & School
Select either Video/Image or Text depending on the picture mode.
• Terminal & Station
Suitable for bus terminals and train stations.
Select either Video/Image or Text depending on the picture mode.
• Video Wall
Suitable for environments where video wall display are used.
Select either Video/Image or Text depending on the picture mode.
• Calibration
In this mode, the brightness, colour, gamma and uniformity settings customized
using the colour calibration programme Advanced Colour Management are applied.
To apply the Calibration mode
quality settings, such as brightness, colour, gamma and uniformity, using the
colour calibration programme Advanced Colour Management.
To download the Advanced Colour Management programme, visit www.samsung.
com/displaysolutions.
• BD Wise
Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theatre
products which support BD Wise.
When BD Wise is turned On, the picture mode is automatically changed to the
optimal resolution.
BD Wise through an
The BD Wise function is enabled only when a source device with the BD Wise
function is connected.
62
Chapter 4. Home screen
On/Off Timer
HOME → On/Off Timer →
• You must set Clock Set before you can use this feature.
On Timer
Set On Timer so that your product turns on automatically at a time and on a day of
your choosing.
The power is turned on with the specied volume or input source.
Set the on timer by making a selection from one of the seven options. Ensure you set
the current time rst. (On Timer 1 ~ On Timer 7)
• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose the days you want On Timer to turn on your
product.
The check mark indicates days you’ve selected.
• Time
• Volume: Set the desired volume level. Use the up and down arrow buttons to
change the volume level.
• Source: Select the input source of your choice.
•
• Slide Show will not play.
•
are recognizable.
• Each USB you use is assigned its own folder. When using more than one of the
same type of USB, make sure the folders assigned to each USB have different
names.
• We recommend that you use a USB memory stick and a multi card reader when
using On Timer.
• The On Timer function may not work with USB devices with a built-in battery,
take too long to recognize these devices.
Off Timer
Set the off timer (Off Timer) by making a selection from one of the seven options. (Off
Timer 1 ~ Off Timer 7)
• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose the days you want Off Timer to turn off your
product.
The check mark indicates days you’ve selected.
• Time
Holiday Management
Timer will be disabled during a period specied as a holiday.
• Add Holiday: Specify the period you want to add as a holiday.
buttons, and click the Save button.
The period will be added to the list of holidays.
63
Chapter 4. Home screen
Start Date: Set the start date of the holiday.
End Date: Set the end date of the holiday.
Delete: Delete selected items from the list of holidays.
Edit: Select a holiday item and then change the date.
• Set Applied Timer: Set the On Timer and Off Timer to not activate on public
holidays.
Press to select the On Timer and Off Timer settings you do not want to
activate.
The selected On Timer and Off Timer will not activate.
Ticker
HOME → Ticker →
Input text while a video or image is displayed and display the text on the screen.
• Off / On
• Message: Enter a message to display on the screen.
• Time: Set the Start Time and End Time to display a Message.
• Position: Select an orientation to display a Message.
• Scroll: Specify the scroll Direction and Speed for the message.
• Font options: Specify the text font and colour for the message.
• Preview
More settings
HOME → More settings →
The menu appears.
64
Chapter 4. Home screen
URL Launcher
HOME → URL Launcher →
URL Launcher
12:00
Change URL
pm
January 1 2015
Clone Product
Picture Mode
ID Settings
On/Off Timer
Video Wall
Ticker
Network Status
More settings
The displayed image may differ depending on the model.
For details on how to use the URL Launcher feature, contact the dealer the product
was purchased from.
• To use the URL Launcher feature, set Play via to URL Launcher in System.
65
Chapter 5. Menu
Menu
Screen adjustment
Picture ▼
2nd 3rd Description
Picture Mode Shop & Mall / Ofce & School /
Terminal & Station / Video Wall
/ Calibration / BD Wise
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
Video/Image mode improves the picture quality of the video device. Text mode improves the picture quality of the
computer.
• Calibration
In this mode, the brightness, colour, gamma and uniformity settings customized using the colour calibration
programme Advanced Colour Management are applied.
To apply the Calibration
brightness, colour, gamma and uniformity, using the colour calibration programme Advanced Colour
Management.
To download the Advanced Colour Management programme, visit www.samsung.com/displaysolutions.
• BD Wise
BD
Wise.
When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution.
BD Wise
Backlight / Contrast /
Brightness / Sharpness /
Colour / Tint (G/R)
Your product has several options for adjusting picture quality.
• When you make changes to Backlight, Contrast, Brightness, Sharpness, Colour or Tint (G/R)
adjusted accordingly.
• You can adjust and store settings for each external device you have connected to an input on the product.
• Lowering picture brightness reduces power consumption.
66
Chapter 5. Menu
Picture ▼
2nd 3rd Description
Colour Temperature Adjust the colour temperature (Red / Green / Blue). (Range: 2800K–16000K)
• Enabled when Colour Tone is set to Off.
• Colour Temperature is disabled if Picture Mode is set to Calibration or BD Wise.
White Balance 2 Point Controls the white balance in 2 point interval by adjusting the red, green, and blue brightness.
10 Point Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.
•
• Enabled when Picture Mode is set to Ofce & School (Video/Image).
Gamma Adjust the primary colour intensity.
• If Picture Mode is set to Calibration, Gamma is disabled.
Calibrated Value Select whether to apply the brightness, colour, gamma and uniformity settings customized using the colour
calibration programme Advanced Colour Management to the Information and Advertisement modes.
• To download the Advanced Colour Management programme, visit www.samsung.com/displaysolutions.
• If Picture Mode is set to Calibration, Calibrated Value is disabled.
Advanced Settings Dynamic Contrast Adjust the screen contrast.
Black Tone Select the black level to adjust the screen depth.
Flesh Tone Emphasize pink Flesh Tone.
RGB Only Mode Displays the Red, Green and Blue colour for making ne adjustments to the hue and saturation.
Colour Space Adjusts the range and variety of colours (the colour space) available to create images.
• To adjust Colour, Red, Green, Blue and Reset, set Colour Space to Custom.
Motion Lighting Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.
• Enabled when Picture Mode is set to Video/Image.
Picture Options Colour Tone Select a colour tone that best suits your viewing needs.
• If Picture Mode is set to Calibration, Colour Tone is disabled.
•
67
Chapter 5. Menu
Picture ▼
2nd 3rd Description
Digital Clean View If the broadcast signal received by your product is weak, you can activate the Digital Clean View feature to reduce
any static and ghosting that may appear on the screen.
• Received signal intensity is the strongest when the bar is green.
• When the signal is weak, try all the options until the the product displays the best picture.
MPEG Noise Filter Reduces MPEG noise to provide improved picture quality.
HDMI Black Level Selects the black level on the screen to adjust the screen depth.
Film Mode This mode is suitable to view movies.
Sets the product to automatically sense and process lm signals from all sources and adjust the picture for
optimum quality.
• Available in HDMI (1080i).
Dynamic Backlight Automatically adjust the backlight to provide the best possible screen contrast under the current conditions.
Picture Size Picture Size Different screen adjustment options are displayed depending on the current input source.
CAUTION
Do not set your product to 4:3 format for a long time.
The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen
burn) which is not covered by the warranty.
Zoom/Position Adjusts the picture zoom and position. This option is available when the input source is set to HDMI (1080i/1080p),
DVI or DisplayPort. Picture Size must be set to Custom for the option to be available.
• Custom under Picture Size is only enabled when Picture Mode is set to Video/Image while in DVI or DisplayPort
mode.
• If you want to reset the picture to its original position, select Reset in the Zoom/Position screen.
The picture will be set to its default position.
68
Chapter 5. Menu
Picture ▼
2nd 3rd Description
Resolution If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize
the picture quality by selecting the same resolution for the product as the PC using this menu.
• Available resolutions: AUTO / 1024x768 / 1280x768 / 1360x768 / 1366x768
Picture Off Selecting Picture Off switches off the screen. The volume is not disabled.
To switch the screen on, press any button other than the volume button.
Reset Picture Resets your current picture mode to its default settings.
69
Chapter 5. Menu
OnScreen display adjustment
OnScreen Display ▼
2nd 3rd Description
Display Orientation Onscreen Menu Orientation Set the menu screen orientation.
Source Content Orientation Set the orientation of content from external devices connected to the product.
Aspect Ratio Set the rotated screen to be either full screen or original.
• Available only when Source Content Orientation is set to Portrait.
Screen Protection Auto Protection Time If the screen displays a still image for a certain period of time you dene, the product activates the screen saver to
prevent the formation of burnt in ghost images on the screen.
Screen Burn Protection To reduce the possibility of screen burn, this unit is equipped with Screen Burn Protection screen burn prevention
technology.
Screen Burn Protection moves the picture slightly on the screen.
• Pixel Shift
4:3 output for an extended period of time may cause image retention. This is not a
defect in the product.
If Picture Size is set to Screen Fit, Pixel Shift is disabled.
• Timer
You can set the timer for Screen Burn Protection.
The Screen Burn Protection
• Immediate Display
• Side Gray
Message Display Source Info Select whether to display the source OSD when the input source changes.
No Signal Message Select whether to display the no-signal OSD when no signal is detected.
MDC Message Select whether to display the MDC OSD when the product is controlled by the MDC.
70
Chapter 5. Menu
OnScreen Display ▼
2nd 3rd Description
Download Status Message Select to display the status when downloading content from a server or other device.
Menu Language Set the menu language.
• A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other
functions on your PC.
Reset OnScreen
Display
This option returns the current settings under OnScreen Display to the default factory settings.
71
Chapter 5. Menu
Sound adjustment
Sound ▼
2nd 3rd Description
Speaker Settings If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound
echo caused by the difference in decoding speed between the products speakers and the speakers attached to your
audio receiver. If this occurs, set the product to External.
• When you set Speaker Settings to External, the products speakers are turned off.
You will hear sound through the external speakers only. When the Speaker Settings is set to Internal, both the
product speakers and the external speakers are on. You will hear sound through both.
• If there is no video signal, both the product’s speakers and the external speakers will be mute.
72
Chapter 5. Menu
Network
Network ▼
2nd 3rd Description
Network Status You can check the current network and Internet status.
Network Settings Congure network settings to use various smart hub features such as Internet search, content sharing
through a home network and feature updates.
Server Network
Settings
Connect to Server To run Player connect to a network.
• If the SSL
• Enter the server IP address and port number. Use 7001 as the port number. (If unable to connect to the server
port number.)
MagicInfo Mode Select the appropriate MagicInfo Mode depending on the environment where you are using the product.
Server Access Select a method to connect the server network.
FTP Mode Specify the FTP operating mode.
Multimedia Device
Settings
Allow other devices such as smart phones and tablets on your network, to share content with your product.
Device Name Select or enter a device name.
This name can be shown on network remote controls over the network.
73
Chapter 5. Menu
Network Settings (Wired)
Connecting to a Wired Network
There are three ways to attach your product to your LAN using cable.
• You can attach your product to your LAN by connecting the LAN port on the back of
your product to an external modem using a LAN cable.
RJ45
External modem (ADSL/
VDSL)
LAN
Modem port
on the wall
LAN cable
Modem cable
• You can attach your product to your LAN by connecting the LAN port on the back
cable for the connection.
RJ45
External modem
(ADSL/VDSL)
Modem port
on the wall
LAN
LAN cableLAN cableModem cable
IP sharer (having
DHCP server)
•
product to your LAN by connecting the LAN port on the back of your product directly
to a network wall outlet using a LAN cable.
elsewhere in your house.
RJ45
LAN port
on the wall
LAN cable
LAN
If you have a Dynamic Network, you should use an ADSL modem or router that
supports the Dynamic Host Conguration Protocol (DHCP). Modems and routers that
support DHCP automatically provide the IP address, subnet mask, gateway, and DNS
values your product needs to access the Internet so you do not have to enter them
manually. Most home networks are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address,
you must enter the IP address, subnet mask, gateway, and DNS values manually on
your product Cable Setup Screen when you set up the network connection. To get
the IP address, subnet mask, gateway, and DNS values, contact your Internet Service
Provider (ISP).
If you have a Windows computer, you can also get these values through your
computer.
•
address.
•
74
Chapter 5. Menu
Automatic Network Settings (Wired)
Connect to the network using a LAN cable.
Make sure a LAN cable is connected rst.
How to set up automatically
1 Set Network type to Wired from the Network Settings page.
2 Press the Connect button to start Network Settings.
The Connect button is only enabled when the LAN cable is properly connected.
3 The network test screen appears and veries the network connection.
When the connection has been veried, the “Wired network and Internet
connection completed.” message appears.
• If the connection process fails, check the LAN port connection.
•
set the connection manually, go to the next section, network setup.
Manual Network Settings (Wired)
Ofces may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask,
gateway and DNS server address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these
steps.
1 Right click the Network icon on the bottom right of the screen.
2 In the pop-up menu that appears, click Status.
3 On the dialog that appears, click the Support tab.
4 On the Support Tab, click the Details button. The Network connection values are
displayed.
How to set up manually
1 Set Network type to Wired from the Network Settings page.
2 Press the Connect button to start Network Settings.
The Connect button is only enabled when the LAN cable is properly connected.
3 The network test screen appears and the verication process starts. Press Stop.
The verication process stops.
4 Select IP Settings on network connection screen. The IP Settings screen appears.
5 Select the eld at the top, press , and then set IP Settings to Enter manually.
Repeat the entry process for each eld in the IP Address.
IP Settings to Enter manually automatically changes DNS Setting to
Enter manually.
6 When done, select OK at the bottom of the page, and then press . The network
test screen appears and the verication process starts.
7 When the connection has been veried, the “Wired network and Internet
connection completed.” message appears.
75
Chapter 5. Menu
Network Setting (Wireless)
Connecting to a Wireless Network
Wireless IP sharer
(router having DHCP
server)
LAN port on the
wall
LAN cable
Samsung recommends using IEEE 802.11n. When you play video over a network
connection, the video may not play smoothly.
•
channel set for the wireless IP sharer is currently being used by another device
nearby, this will result in interference and communication failure.
• Your product supports only the following wireless network security protocols.
•
•
WPS(PBC)
Automatic Network Setup (Wireless)
Most wireless networks have an optional security system that requires devices
that access the network to transmit an encrypted security code called an Access or
Security Key. The Security Key is based on a Pass Phrase, typically a word or a series
of letters and numbers of a specied length you were asked to enter when you set up
security for your wireless network. If you use this method of setting up the network
connection, and have a Security Key for your wireless network, you will have to enter
the Pass Phrase during the the automatic or manual setup process.
How to set up automatically
1 Set Network type to Wireless from the Network Settings page.
2 The Network function searches for available wireless networks. When done, it
displays a list of the available networks.
3 In the list of networks, press the or button to select a network, and then press
the button twice.
If the desired wireless router does not appear, select Refresh to search again.
If the router cannot be found after retrying, select the Stop button.
The Add Network button appears.
4 If the Enter password. screen appears, go to step 5. If you select a wireless router
that does not have security, go to step 7.
5 If the router has security, enter the Enter password. (Security key or PIN).
6 When done, use the right arrow button to move the cursor to Done, and then press
. The network connection screen appears and the verication process starts.
If the product cannot connect to the Internet even though it is connected to a
router, check if the Internet connection of the router.
7 When the connection has been veried, the “Your wireless network and Internet
connection are setup and ready to use.” message appears.
76
Chapter 5. Menu
Manual Network Setup (Wireless)
Ofces may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask,
gateway and DNS server address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these
steps.
1 Right click the Network icon on the bottom right of the screen.
2 In the pop-up menu that appears, click Status.
3 On the dialog that appears, click the Support tab.
4 On the Support Tab, click the Details button. The Network connection values are
displayed.
How to set up manually
1 Set Network type to Wireless from the Network Settings page.
2 The Network function searches for available wireless networks. When done, it
displays a list of the available networks.
3 In the list of networks, press the or button to select a network, and then press
the button twice.
If the desired wireless router does not appear, select Refresh to search again.
If the router cannot be found after retrying, select the Stop button.
4 If the Enter password. screen appears, go to step 5. If you select a wireless router
that does not have security, go to step 7.
5 If the router has security, enter the Enter password. (Security key or PIN).
6 When done, use the right arrow button to move the cursor to Done, and then press
. The network connection screen appears and the verication process starts.
7 Select Stop while network connections are being attempted. This will stop the
connection.
8 Select IP Settings on network connection screen. The IP Settings screen appears.
9 Select the eld at the top, press , and then set IP Settings to Enter manually.
Repeat the entry process for each eld in the IP Address.
IP Settings to Enter manually automatically changes DNS Setting to
Enter manually.
10 When done, select OK at the bottom of the page, and then press . The network
test screen appears and the verication process starts.
11 When the connection has been veried, the “Your wireless network and Internet
connection are setup and ready to use.” message appears.
WPS(PBC)
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps.
1 Set Network type to Wireless from the Network Settings page.
2 Select WPS(PBC), press .
3 Press the WPS(PBC) button on your router within 2 minutes. Your product
automatically acquires all the network setting values it needs and connects to your
network.
4 The network connection screen appears, and network setup is done.
77
Chapter 5. Menu
System
System ▼
2nd 3rd Description
Accessibility Voice Guide Switch Voice Guide on or off. The language used for Voice Guide will be the same as the language to be set in Menu
Language.
Menu Transparency Adjust transparency of menu box.
High Contrast Set the background and font to high-contrast colours in Menu. Menu transparencies become opaque when the
option is selected.
Enlarge Set whether to enlarge highlighted item in Menu.
Setup After powering on the product for the rst time, congure basic settings such as the language, channel and time.
•
If you want to change the PIN number, use the Change PIN function.
Proximity Sensor Proximity Sensor Turn on or off the proximity sensor.
The main screen may appear black when the screen mode is set to Content.
Detection Range Select the sensor’s detection range.
The maximum detection range is approximately 1.5 m.
Detection Duration Set a minimum time period before an object can be detected.
Any objects that disappear before this period will be ignored.
Screen Mode Select a screen mode that will be displayed when an object is detected.
Resized content cannot be displayed when content from MagicInfo or a multimedia player is displayed on the main
screen.
Size Select a window size for the resized content.
Position Select a window position for the resized content.
78
Chapter 5. Menu
System ▼
2nd 3rd Description
Time You can congure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a
specied time using the Timer function.
• Press the INFO button if you want to view the current time.
Clock Set Select Clock Set. Select Date or Time, and then press .
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow
buttons to move from one entry eld to the next. Press when done.
•
DST Switches the DST (Daylight Saving Time) function on or off.
Sleep Timer Automatically shuts off the product after a preset period of time.
• Use the up and down arrows to select a period of time, and then press . To cancel Sleep Timer, select Off.
Power On Delay When connecting multiple products, adjust the power-on time for each product to prevent power overload (within
the range 0–50 seconds).
Auto Source Switching Turning on the display with Auto Source Switching On, and the previous video source selection is not active, the
display will automatically search the different video input sources for active video.
Auto Source Switching When the Auto Source Switching is On, the display video source will automatically be searched for active video.
The Primary Source selection will be activated, if the current video source is not recognized.
Secondary Source selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform two searches for an
active source, each search checking the primary and then secondary source. If both searches fail, the display will
return to the rst video source and display a message indicating that there is no signal.
When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence
looking for an active video source, returning back to the rst video source in the sequence if no video is found.
Primary Source Recovery Select whether to restore the selected primary input source when a primary input source is connected.
• The Primary Source Recovery function is disabled if Primary Source is set to All.
Primary Source Specify Primary Source for the automatic input source.
79
Chapter 5. Menu
System ▼
2nd 3rd Description
Secondary Source Specify Secondary Source for the automatic input source.
• The Secondary Source Recovery function is disabled if Primary Source is set to All.
Power Control Auto Power On This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
PC Module Power The PC module can be turned on/off separately from the LFD.
Max. Power Saving Turns off the product to reduce power consumption after the PC has been left idle for a specied period of time.
• Available only DVI, HDMI, DisplayPort mode.
Standby Control You can set the screen standby mode to be applied when an input signal is received.
• Available only DVI, HDMI, DisplayPort mode.
• Ensure that the source device is connected correctly when the Signal is weak or no signal message appears.
• If No Signal Message is set to Off, the Signal is weak or no signalNo Signal
Message to On.
Network Standby This feature keeps the network power on when the product turns off.
Power Button The power button can be set to either turn on the power or turn on/off the power.
Eco Solution Energy Saving Reduce the power consumption by adjusting the screen brightness.
Eco Sensor To enhance your power savings, the picture settings will automatically adapt to the light in the room.
• Adjusting the Backlight setting in the Picture menu disables the Eco Sensor.
• If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the
surrounding light intensity.
Screen Lamp Schedule Adjust the panel brightness. A value closer to 100 makes the panel brighter.
No Signal Power Off Save power by turning the device off when no signal is received from any source.
•
•
Auto Power Off The product will automatically turn off if you don’t press a button on the remote or touch a button on product front
panel within select hours to prevent overheating.
80
Chapter 5. Menu
System ▼
2nd 3rd Description
Temperature Control This function detects the internal temperature of the product. You can specify the temperature range that is
acceptable.
The default temperature is set to 77 °C.
The recommended operating temperature for this product is 75 to 80 °C (based on an ambient temperature of
40 °C).
•
temperature continues to rise, the product will power off to prevent overheating.
Device Manager Keyboard Settings Connecting a keyboard to the product displays the Keyboard Settings menu.
Mouse Settings Connecting a mouse to the product displays the Mouse Settings menu.
Pointer Settings Connecting a pointer to the product displays the Pointer Settings menu.
Play via Select the appropriate Play via mode depending on the environment where you are using the product.
The home screen may be different depending on the setting.
Change PIN The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter it in Enter New PIN. Reenter the same 4 digits in Conrm New PIN.
When the Conrm screen disappears, press the Close button. The product has memorised your new PIN.
•
Security Safety Lock •
If you want to change the PIN number, use the Change PIN function.
All the menus and buttons of the product and remote control, except for the LOCK button on the remote control, will
be locked by the Safety Lock function.
To unlock the menus and buttons, press the LOCK button and then enter the password (default password: 0 - 0 - 0 -
0).
Turn on Power On Button to enable the remote control’s Power button to turn on the device while Safety Lock is
enabled.
81
Chapter 5. Menu
System ▼
2nd 3rd Description
Button Lock This menu can be used to lock the buttons on the product.
Only the remote control can control the product if Button Lock is set to On.
USB Auto Play Lock Select whether to automatically play MagicInfo content saved on a connected USB device.
• MagicInfo content displays “USB Auto Play Lock : On
Mobile Connection Lock Restrict other devices on your network, such as smart phones and tablets, to share content with your signage.
General Smart Security This function protects all the external devices connected to the TV from any viruses.
BD Wise Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theatre products which support BD Wise.
When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution.
• BD Wise
• The BD Wise function is enabled only when a source device with the BD Wise function is connected.
Anynet+ (HDMI-CEC) Refer to “Anynet+ (HDMI-CEC)” on page 82.
HDMI Hot Plug This feature is used to activate the time delay to turn on a DVI/HDMI source device.
DivX® Video On Demand Shows the registration code authorized for the product.
If you connect to the DivX® web site and register using that code, you can download the VOD registration le.
For more information about DivX® VOD, visit http://vod.divx.com.
Game Mode When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming
experience by selecting game mode.
•
Reset System This option returns the current settings under system to the default factory settings.
82
Chapter 5. Menu
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
Anynet+ is a function that enables you to control all connected Samsung devices
that support Anynet+ with your Samsung product remote. The Anynet+ system can
be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
• You can only control Anynet+ devices using the product remote control, not the
buttons on the product.
• The product remote control may not work under certain conditions. If this occurs,
reselect the Anynet+ device.
• Anynet+Anynet+ is in the standby or on
status.
• While in PIP mode, Anynet+
display.
• Anynet+
devices of the same type.
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices
connected to the product.
Press the TOOLS button to display the Anynet+ menu and select a menu you want.
View PC Changes Anynet+ mode to PC mode.
Select Device Shows the Anynet+ device list.
(device_name) MENU Shows the menu of the connected device menus. E.g. if a
DVD player is connected, the disc menu of the DVD player
will appear.
(device_name) Tools Shows the tools menu of the connected device. E.g. if
a DVD player is connected, the tools menu of the DVD
player will appear.
•
available.
(device_name) Title
Menu
Shows the title menu of the disc in the connected device.
E.g. If a DVD player is connected, the title menu of the
movie in the DVD player will appear.
•
available.
83
Chapter 5. Menu
Auto Turn Off
Setting an Anynet+ Device to turn Off automatically when the product is turned off.
• If Auto Turn Off is set to Yes, running external devices will turn off at the same time
as the product powers off.
•
Search for Devices
Switching between Anynet+ devices
1 Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press .
2 Select Select Device, and then press the button.
If you cannot nd a device you want, select Refresh to refresh the list.
3 Select a device, and then press the button. You can switch to the selected
device.
• The Select Device menu appears only when you set Anynet+ (HDMI-CEC) to On
in the System menu.
•
the switching operation while switching is in progress.
• If you have selected an Anynet+ device by pressing the SOURCE button and then
selecting its input source, you cannot use the Anynet+ function.
• Anynet+ device by using the Select Device.
Troubleshooting for Anynet+
Problem Possible Solution
Anynet+ does not
work.
• Check if the device is an Anynet+ device. The Anynet+
system supports Anynet+ devices only.
• Check if the Anynet+ device power cord is properly
connected.
•
connections.
• Check whether Anynet+ (HDMI-CEC) is set to On in the
System menu.
• Check whether the remote control is Anynet+
compatible.
• Anynet+ doesn’t work in certain situations. (initial
setup)
•
cable, please make sure to search devices again or turn
your
• product off and on again.
• Check if the Anynet+ function of the Anynet device is
set on.
I want to start
Anynet+.
• Check if the Anynet+ device is properly connected to
the product and check if the Anynet+ (HDMI-CEC) is set
to On in the System menu.
• Press the TOOLS button to display the Anynet+ menu
and select a menu you want.
I want to exit Anynet+. • View PC in the Anynet+ menu.
• Press the SOURCE button on the product remote control
84
Chapter 5. Menu
Problem Possible Solution
The message
“Disconnecting
Anynet+ device ...”
appears on the screen.
• You cannot use the remote control when you are
• Use the remote control after the product has
switching to Anynet+.
The Anynet+ device
does not play.
• You cannot use the play function when initial setup is in
progress.
The connected device
is not displayed.
• Check whether or not the device supports Anynet+
functions.
•
connected.
• Check whether Anynet+ (HDMI-CEC) is set to On in the
System menu.
•
•
cable.
•
• If the connection is terminated because there has
disconnected, please repeat the device scan.
85
Chapter 5. Menu
Support
Support ▼
2nd 3rd Description
Software Update The Software Update menu lets you upgrade your product software to the latest version.
•
after completing the software upgrade.
• When you upgrade software, all video and audio settings you have made will return to their default settings. We
advise you to write down your settings so that you can easily reset them after the upgrade.
Update now Update the software to the latest version.
Auto Update This feature automatically updates the product when not in use.
Contact Samsung View this information when your product does not work properly or when you want to upgrade the software.
You can nd information regarding our call centres and how to download products and software.
• Contact SamsungModel Code and Software Version.
Go to Home Accessible using the HOME button on the remote control.
Go to Home to play a variety of content from a memory device or a connected network.
Reset All This option returns all the current settings for a display to the default factory settings.
86
Chapter 6. Multimedia content (Media Play)
Multimedia content (Media Play)
Play photos, videos or music saved on a storage device.
Play a variety of content using the following methods.
• Using a USB device: Play media content such as videos, photos and music from a
USB device.
• Connecting a storage device: Play media content saved on a storage device such as
a smartphone, camera, PC or cloud service.
Before you play
CAUTION
•
not damaged or lost.
Samsung Electronics is not liable for any damage or loss of data.
• Do not remove a USB device while it is loading.
• If a USB device is connected using a USB extension cable, the USB device may not be
•
device may be corrupted or may not be able to be played.
If this occurs, connect the USB device to the PC to format the device, then make sure
the device is connected properly.
• USB HDD greater than 2TB is not supported.
Compatible devices with media play
• Some USB digital cameras, smartphones and audio devices may not be compatible
with the product.
• Media play is only compatible with USB MSC devices.
• MSC device refers to a Mass Storage Class Bulk-Only Transport device.
• Examples of MSC devices include Thumb drives, Flash card readers and USB HDDs.
(USB hubs are not supported.)
These MSC devices must be connected directly to a USB port on the product.
• If more than one Picture Transfer Protocol (PTP) device is connected, only one will
work at a time.
• If multiple MSC devices are connected, some devices may not be recognized. USB
devices that require high power (higher than 500mA or 5V) may not be supported.
• If an overheating warning message appears when a USB device is connected or
used, the USB device may not be recognized or function properly.
•
Auto Protection Time.
• Power saving mode on some external hard disk drives may automatically deactivate
after connecting to the product.
File system and formats
•
• Media Transfer Protocol (MTP) is not supported.
•
• Media play supports the sequential JPEG format.
It does not support the progressive JPEG format.
• Images with a higher resolution take longer to be displayed on the screen.
•
•
•
each folder.
•
not open.
87
Chapter 6. Multimedia content (Media Play)
•
Digital Rights Management (DRM) refers to a system for protecting the copyrights of
data circulated via the Internet or other digital media by enabling secure distribution
and/or disabling illegal distribution of the data.
Using a USB device
Connecting a USB device
1 Turn on your product.
2 Connect a USB device containing photo, music and/or movie les to the USB port
on the back or side panel of the product.
3 The Player page automatically appears as soon as a USB device connects to the
product.
automatically.
To view content saved on a USB device, connect the USB device to a USB port on
the product.
It is recommended to use a USB HDD that has a power adapter.
Removing a USB device
Removing a USB device from Source
1 Press SOURCE on the remote control. Alternatively, go to Source using the OSD
menu.
2 Select USB from Source, and then press the TOOLS button on the remote control.
The Options menu is displayed.
3 Select Remove USB and wait until the USB device is disconnected. The USB device
is disconnected.
It is recommended to remove a USB device using the Remove USB function.
Playing multimedia content
Approving a PC/mobile device connection
Play photos, videos or music saved on a PC or mobile device.
To play media content from a PC or mobile device on the product, the connection with
the PC or mobile device must be approved.
•
from a product after connecting a PC or mobile device to the product.
1 Press SOURCE on the remote control. Alternatively, go to Source using the OSD
menu.
2 Select Network from Source. The Network Device menu appears.
3 Select Options from the screen, and then select Multimedia Device Settings. A list
of devices connected to the product will appear.
4 Select a device and approve the device connection. Playback is only available on
devices that are permitted to connect.
Sending a media content playback request from a PC or mobile device displays a
prompt asking if connection with the product is permitted. Conveniently connect
the devices using the prompt.
• Network Settings.
• Ensure the product and PC are connected to the same network subnet.
All IP addresses are made up of four parts separated by dots.
as the PC, except for the fourth part of the address, if they are connected to the
88
Chapter 6. Multimedia content (Media Play)
When connected to a home network (DLNA)
Play content saved on a device connected to a home network.
•
compatibility issue.
• Playback of some media content shared with a PC or mobile device may not be
functions may not be available.
• Media content may not play properly if there is network congestion. If this is the
case, use a USB device.
1 Press SOURCE on the remote control. Alternatively, go to Source using the OSD
menu.
2 Select Network from Source. The Network Device menu appears.
3 Select a device connected via the home network (DLNA). A list of les and folders
shared with the selected device will appear.
4 Select media content to play from the list. Play the selected media content.
89
Chapter 6. Multimedia content (Media Play)
Multimedia content list
SOURCE → Source → USB
The media content list page on a storage device provides the following features.
• Sort by
This menu item is not available if Filter is set to All.
• Filter
Among Photos, Videos and Music
• Options
This menu item is not available if Filter is set to All.
Option name Operations Photos Videos Music
Slide Show Start a slideshow.
• This menu item is not available if Sort by is set to Folder.
Encoding Select an encoding language if the title of media content appears corrupted.
Add to Playlist Add les to a playlist or create a new playlist.
Play Selected Select and play desired content from the media content list.
Send Send media content to another storage device. This is similar to the “copy” feature on
PCs.
Index Select an index to conveniently locate media content if a storage device contains a lot
of media content.
• Provided indices include dates and alphanumeric characters.
• This menu item is not available if Sort by is set to Folder.
90
Chapter 6. Multimedia content (Media Play)
Menus available
Photo
Pressing the or TOOLS button displays the following buttons. The RETURN button makes the buttons disappear.
• Pressing the INFO button while a device name is selected will display information about the selected device.
• Pressing the INFO
• Pause / Play
Start or stop a slideshow. Using a slideshow, it is possible to play all photos in a folder.
• Previous / Next
View the previous or next photo.
• Settings
Option name Operations
Slideshow Settings • Speed: Change the slideshow speed.
• Effects: Apply transition effects between photos.
Rotate Rotate photos.
Zoom Zoom in on photos up to 4x.
Picture Mode Change the Picture Mode.
Background Music Play background music while viewing photos.
•
• The mini player is displayed while background music (Background Music) is playing. Using the mini player, pause the music currently
playing or change to another music.
• Previous BGM track / Pause BGM / Play BGM / Next BGM track
Sound Mode Change the Sound Mode.
• This menu item is only available when background music (Background Music) is playing.
Select Speakers Select a speaker that will output the background music (Background Music).
• This menu item is only available when background music (Background Music) is playing.
91
Chapter 6. Multimedia content (Media Play)
Option name Operations
Send Send open photos to another storage device. This is similar to the “copy” feature on PCs.
Information View information about a le.
Video
Pressing the or TOOLS button displays the following buttons. The RETURN button makes the buttons disappear.
• Pause / Play
Pause or play a video.
• Rewind / Fast Forward
To change the playback speed to the original speed, select .
• Previous / Next
To play the previous video, select twice. Selecting once will play the current video from the beginning.
To play the next video, select .
• Settings
Option name Operations
Select Scene • Thumbnails: Select a scene and play the video from the scene.
Thumbnails
• Chapter Titles: Select and play another video in the same folder.
• Time Bar
point in the video.
Subtitle Language / Sync / Reset Sync / Size / Encoding
• If the subtitle is displayed incorrectly, change Encoding options.
Repeat Congure Repeat.
• Off
• Repeat One: Play the current video repeatedly.
• Repeat All: Play all videos in a folder repeatedly.
92
Chapter 6. Multimedia content (Media Play)
Option name Operations
Rotate Rotate an image.
Picture Size Change the screen size (Picture Size). Supported screen sizes vary depending on the image.
Picture Mode Change the Picture Mode.
Sound Mode Change the Sound Mode.
Select Speakers Select a speaker that will output sound from the product.
Audio Language Play a video using a desired language. This feature only activates when a streaming le that supports multiple audio formats is playing.
Information View information about a le.
Music
• Pause / Play
Pause or play music.
• Rewind / Fast Forward
.
• Previous / Next
twice. Selecting once will play the current music from the beginning.
.
• Repeat
Repeat mode. Repeat OneRepeat All
• Shufe
• Select Speakers
Select a speaker that will output sound from the product.
• Sound Mode
Change the Sound Mode.
93
Chapter 6. Multimedia content (Media Play)
Subtitles and supported le formats
Subtitle
External Internal
•
• SAMI (.smi)
• SubRip (.srt)
• SubViewer (.sub)
• Micro DVD (.sub or .txt)
• SubStation Alpha (.ssa)
• Advanced SubStation Alpha (.ass)
• Powerdivx (.psb)
• Xsub
Container: AVI
• SubStation Alpha
Container: MKV
• Advanced SubStation Alpha
Container: MKV
• SubRip
Container: MKV
•
Supported image resolutions
File extension Type Resolution
*.jpg, *.jpeg JPEG 15360 x 8640
*.webp PNG 1920 x 1080
*.bmp BMP 1920 x 1080
*.mpo MPO 15360 x 8640
Supported music le formats
File extension Type Codec Comments
*.mp3 MPEG MPEG1 Audio Layer 3
*.m4a, *.mpa, *.aac, *.3ga MPEG4 AAC
94
Chapter 6. Multimedia content (Media Play)
File extension Type Codec Comments
*.ac FLAC FLAC •
• Supports up to 2 channel.
Supported video formats
• Video content will not play, or not play correctly, if there is an error in the content or the container.
• Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above.
• If the Index Table is in error, the Seek (Jump) function is not supported.
•
•
• Some USB/digital camera devices may not be compatible with the player.
Video Decoder Audio Decoder
•
•
•
• GMC 2 over is not supported.
• Supports only BD MVC Spec.
•
• WMA lossless audio is not supported.
•
• If Vorbis is only in Webm container, supports up to 2 channel.
95
Chapter 6. Multimedia content (Media Play)
File extension Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Audio Codec
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.mov
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.v
*.vob
*.svi
*.m2ts
*.mts
*.divx
AVI
MKV
ASF
MP4
3GP
VRO
VOB
PS
TS
DivX 3.11 / 4.x / 5.x / 6.x 1920 x 1080 30 AC3
LPCM
ADMPCM
(IMA, MS)
AAC
HE-AAC
WMA
DD+
MPEG(MP3)
DTS Core
G.711(ALaw, µ-Law)
MPEG4 SP / ASP
H.264 BP / MP / HP
Motion JPEG
Window Media Video v9
MPEG2
MPEG1
VP6 640 x 480 4
MVC 1920 x 1080 24 / 25 / 30 40
*.webm WebM VP8 6 ~ 30 8Vorbis
96
Chapter 7. Troubleshooting
Troubleshooting
Before you contact us
Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre.
Diagnosis
Check if your product is operating normally by using the product test function.
If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing.
1 Power off both the PC and product.
2 Disconnect all the cables from the product.
3 Power on the product.
4 If No Signal is displayed, the product is operating normally.
If the screen remains blank, check the PC system, video controller and cable.
Screen Resolution
Not Optimum Mode will briey be displayed if a mode that exceeds a supported resolution is selected (refer to Supported Resolutions).
97
Chapter 7. Troubleshooting
Checkpoints
Installation issue (PC mode)
The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure.
Blank spaces are found on all four sides of the screen
when an HDMI or HDMI-DVI cable is connected to the
product and PC.
The blank spaces found on the screen have nothing to do with the product.
Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust the screen size in
the HDMI or DVI settings for the graphics card.
If the graphics card settings menu does not have an option to adjust the screen size, update the graphics card driver
to the latest version.
(Please contact the graphics card or computer manufacturer for further details about how to adjust the screen
settings.)
PC is shown in Source when a PC is not connected. PC is always shown in Source irrespective of whether or not a PC is connected.
Screen issue
The power LED is off. The screen will not switch on. Check the cable connection between the product and PC, and ensure the connection is secure.
No Signal is displayed on the screen. Check that the product is connected correctly with a cable.
Check that the device connected to the product is powered on.
Not Optimum Mode is displayed. This message is displayed when a signal from the graphics card exceeds the product’s maximum resolution and
frequency.
Refer to the Standard Signal Mode Table and set the maximum resolution and frequency according to the product
specications.
The images on the screen look distorted. Check the cable connection to the product.
The screen is not clear. The screen is blurry. Adjust Coarse and Fine.
Remove any accessories (video extension cable, etc) and try again.
Set the resolution and frequency to the recommended level.
98
Chapter 7. Troubleshooting
The screen appears unstable and shaky. Check that the resolution and frequency of the PC and graphics card are set within a range compatible with the
product. Then, change the screen settings if required by referring to the Additional Information on the product
menu and the Standard Signal Mode Table.
There are shadows or ghost images left on the screen.
The screen is too bright. The screen is too dark. Adjust Brightness and Contrast.
Screen colour is inconsistent. Go to Picture and adjust the Colour Space settings.
White does not really look white. Go to Picture and adjust the White Balance settings.
There is no image on the screen and the power LED
blinks every 0.5 to 1 second.
The product is in power saving mode.
Press any key on the keyboard or move the mouse to return to the previous screen.
The product will turn off automatically. Go to System and make sure Sleep Timer is set to Off.
If a PC is connected to the product, check the power status of the PC.
Make sure the power cable is connected properly to the product and power outlet.
If the signal from a connected device is not detected, the product automatically turns off after 10 to 15 minutes.
Picture quality of the product is different from the dealer
shop where it was purchased.
Use an HDMI cable to obtain high-denition (HD) picture quality.
The screen display does not look normal. Encoded video content may cause the display to appear corrupted in scenes featuring fast moving objects such as in
a sports event or action video.
Low signal level or low picture quality may cause the display to appear corrupted. This does not mean the product is
defective.
A cell phone within a distance of one-meter radius may cause static on analogue and digital products.
The brightness and colour do not look normal. Go to Picture and adjust the screen settings such as Picture Mode, Colour, Brightness and Sharpness.
Go to System and adjust the Energy Saving settings.
Reset the screen settings to the default settings.
Broken lines are displayed on the edges of the screen. If Picture Size is set to Screen Fit, change the setting to 16:9.
Lines (red, green or blue) are displayed on the screen. These lines are displayed when there is a defect in DATA SOURCE DRIVER IC on the monitor.
Contact a Samsung Service Centre to resolve the issue.
99
Chapter 7. Troubleshooting
The display looks unstable and then freezes. The screen may freeze when a resolution other than the recommended resolution is used or if the signal is not
stable. To resolve the issue, change the PC resolution to the recommended resolution.
The screen cannot be displayed in full screen. A scaled SD (4:3) content le can cause black bars on both sides of an HD channel screen.
A video with an aspect ratio different from the product can cause black bars at the top and bottom of the screen.
Change the screen size setting to full screen on the product or source device.
Sound issue
There is no sound. Check the connection of the audio cable or adjust the volume.
Check the volume.
The volume is too low. Adjust the volume.
If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or
software programme.
Video is available but there is no sound. If an HDMI cable is connected, check the audio output settings on the PC.
Go to Sound and change Speaker Settings to Internal.
If a source device is used
• Make sure the audio cable is properly connected to the audio input port on the product.
• Check the audio output settings for the source device.
(For example, if an HDMI cable is connected to the monitor, the audio setting for the cable box may need to be
changed to HDMI.)
If a DVI-HDMI cable is used, a separate audio cable is required.
If the product has a headphone port, make sure nothing is connected to it.
Reconnect the power cable to the device and then reboot the device.
There is static coming from the speakers. Check the cable connection. Make sure a video cable is not connected to an audio input port.
Check the signal strength after connecting a cable.
Low signal level can cause corrupted sound.
100
Chapter 7. Troubleshooting
There is audible sound when the volume is muted. When Speaker Settings is set to External, the volume button and mute function are disabled.
Adjust the volume for the external speakers.
Audio settings for main speakers are separate from the internal speakers on the product.
Changing or muting the volume on the product does not affect an external amplier(decoder).
Sound from the monitor does not change after Sound
Mode is changed.
Audio settings for main speakers are separate from the internal speakers on the product.
Audio settings on a source device do not affect the internal speaker settings on the product.
There is an echo sound coming from the speakers. Different decoding speeds between the product speakers and external speakers can cause an echo.
In this case, set Speaker Settings to External.
Remote control issue
The remote control does not work. Make sure that the batteries are correctly in place (+/-).
Check if the batteries are at.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs switched on in the vicinity.
Source device issue
A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced.
Other issue
The product smells like plastic. The plastic smell is normal and disappears over time.
The monitor appears tilted. Remove and then attach the stand again to the product.
Audio or video cuts out intermittently. Check the cable connection and connect it again if required.
Using a very hard or thick cable may corrupt audio and video les.
Make sure cables are exible enough to ensure durability. When mounting the product onto a wall, it is
recommended to use right-angle cables.
101
Chapter 7. Troubleshooting
Small particles are found on the edges of the product. The particles are part of the product design. The product is not defective.
The PIP menu is not available. The menu is enabled or disabled depending on the Source mode.
When I try to change the PC resolution, a message “The
dened resolution is not supported.” appears.
The message “The dened resolution is not supported.” appears if the input source resolution exceeds the
maximum resolution of the display.
To resolve the issue, change the PC resolution to a resolution supported on the display.
There is no sound from the speakers in HDMI mode when
a DVI-HDMI cable is connected.
DVI cables do not transmit sound data.
Make sure to connect the audio cable to the correct input jack to enable audio.
HDMI Black Level is not functioning properly on an HDMI
device with YCbCr output.
This function is available only when a source device, such as a DVD player and STB, is connected to
the product via an HDMI (RGB signal) cable.
There is no sound in HDMI mode. Displayed picture colours may not look normal. Video or sound may not be available. This can occur if a source
device that only supports an older version of the HDMI standard is connected to the product.
If these issues occur, connect an audio cable along with the HDMI cable.
Some PC graphics cards may not automatically recognize HDMI signals that do not include sound.
In this case, manually select a sound input.
Sound input Screen mode
PC Auto PC settings
DVI PC Audio In (Stereo ports) PC settings
102
Chapter 7. Troubleshooting
The IR sensor is not functioning. Make sure the sensor light turns on when a button is pressed on the remote control.
If the sensor light does not turn on, turn the power switch off and then on again on the back of the product.
(The power LED lights up red when the screen is switched off.)
If the sensor light still does not turn on after the power switch is turned off and then on again, an internal jack may
be disconnected.
Contact your nearest service centre to have the product serviced.
If the sensor light that is on does not ash red when a button is pressed on the remote control, the IR sensor may be
defective.
Contact your nearest service centre to have the product serviced.
This function is available only when a source device, such as a DVD player and STB, is connected to the product via
an HDMI (RGB signal) cable.
The proximity sensor is not functioning. Make sure you are in the proper detection range.
Make sure the proximity sensor is on.
Change the detection range.
Move any obstacles in front of the sensor.
Disconnect and then reconnect the proximity sensor.
Wipe the sensor with a soft, clean cloth.
Make sure you have removed the sensor protection vinyl.
The proximity sensor only detects at a short range. Change the detection range.
Make sure you have removed the sensor protection vinyl.
Wipe the sensor with a soft, clean cloth.
In power saving mode, when the input source is
DisplayPort, PC display settings cannot be saved.
Go to System → General and set Max. Power Saving to Off. Alternatively, congure the PC display output settings
again. Ensure the set is turned on.
When booting the PC with the input source set to
DisplayPort, the BIOS and booting screens do not appear.
Boot the PC when the set is turned on or when the input source is not DisplayPort.
103
Chapter 7. Troubleshooting
Frequently asked questions
Refer to the user manual for your PC or graphics card for further instructions on adjustment.
Question Answer
How can I change the frequency? Set the frequency on your graphics card.
• Windows 7: Go to Control Panel → Appearance and Personalization → Display → Adjust resolution → Advanced
Settings → Monitor and adjust the frequency in Monitor Settings.
• Windows 8: Go to Settings → Control Panel → Appearance and Personalization → Display → Adjust resolution →
Advanced Settings → Monitor and adjust the frequency in Monitor Settings.
• Windows 10: Go to Settings → System → Display → Advanced display settings → Display adapter properties →
Monitor, and adjust Screen refresh rate under Monitor settings.
How can I change the resolution? • Windows 7: Go to Control Panel → Appearance and Personalization → Display → Adjust Resolution and adjust the
resolution.
• Windows 8: Go to Settings → Control Panel → Appearance and Personalization → Display → Adjust Resolution and
adjust the resolution.
• Windows 10: Go to Settings → System → Display → Advanced display settings, and adjust the resolution.
How do I set power saving mode? • Windows 7: Set power saving mode in Control Panel → Appearance and Personalization → Personalize → Screen
Saver Settings or BIOS SETUP on the PC.
• Windows 8: Set power saving mode in Settings → Control Panel → Appearance and Personalization → Personalize
→ Screen Saver Settings or BIOS SETUP on the PC.
• Windows 10: Set power saving mode in Settings → Personalization → Lock screen → Screen timeout settings →
Power & sleep or BIOS SETUP on the PC.
104
Chapter 8. Appendix
Appendix
Specications
General
Model Name ML32E ML55E / ML55E-R
Panel Size 32 CLASS (31.5 inches / 80.1 cm) 55 CLASS (54.6 inches / 138.7 cm)
Display area 698.4 mm (H) x 392.85 mm (V) (27.5 inches (H) x 15.5 inches (V)) 1209.6 mm (H) x 680.4 mm (V) (47.7 inches (H) x 26.8 inches (V))
Dimensions (W x H x D) 740.2 x 434.6 x 57.4 mm (29.1 x 17.1 x 2.3 inches) 1249.2 x 720.0 x 57.4 mm (49.2 x 28.3 x 2.3 inches)
Weight (without stand) 7.9 kg (17.4 Ibs) 25.5 kg (56.2 Ibs)
Audio Output 10 W 10 W + 10 W
Power Supply AC 100 to 240 VAC (+/- 10%), 60 / 50 Hz ± 3 Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Environmental
considerations
Operating Temperature : 0 °C – 40 °C (32 °F – 104 °F), With PIM : 10 °C – 40 °C (50 °F – 104 °F)
Humidity : 10% – 80%, non-condensing
Storage Temperature : -20 °C – 45 °C (-4 °F – 113 °F)
Humidity : 5% – 95%, non-condensing
• Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings.
Monitor installation takes place automatically. However, you can customize the installation settings if desired.
• Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does not affect product
performance.
• This device is a Class A digital apparatus.
105
Chapter 8. Appendix
Recommendation - EU only
• Hereby, Samsung Electronics, declares that this Monitor is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
• The ofcial Declaration of Conformity may be found at http://www.samsung.com/displaysolutions, go to Support > Search Product Support and enter the model name.
• This equipment may only be used indoors.
• This equipment may be operated in all EU countries.
Recommendation - USA only
• Dispose unwanted electronics through an approved recycler.
• To nd the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278 - 0799
106
Chapter 8. Appendix
PowerSaver
The power saving function of this product reduces power consumption by switching off the screen and changing the colour of the power LED if the product is not used for a
specied period of time. The power is not turned off in power saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power saving mode
only functions when the product is connected to a PC with a power saving function.
•The displayed power consumption level can vary in different operating conditions or when settings are changed.
•SOG(Sync On Green) is not supported.
•To reduce the power consumption to 0, turn off the switch at the back or disconnect the power cord. Disconnect the power cable if you will not be using the product for an
extended period of time (during vacation, etc.).
Preset timing modes
This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specied
resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specied for your product.
Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product. If the LCD product does not support 85Hz, change the vertical frequency to 60Hz
using the CDT product before you exchange it with the LCD product.
Model Name ML32E / ML55E / ML55E-R
Synchronization Horizontal frequency 30 - 80 kHz
Vertical frequency 60 - 75 Hz
Resolution Optimum resolution 1920 x 1080 @ 60 Hz
Maximum resolution 1920 x 1080 @ 60 Hz
107
Chapter 8. Appendix
• Horizontal frequency
The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal
frequency. Horizontal frequency is measured in kHz.
• Vertical frequency
The product displays a single image multiple times per second (like a uorescent light) to display what the viewer sees. The rate of a single image being displayed repeatedly
per second is called vertical frequency or refresh rate. Vertical frequency is measured in Hz.
The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal transmitted from the PC does
not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings according to the following table by referring to the
graphics card user manual.
Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V)
IBM, 720 x 400 31.469 70.087 28.322 −/+
MAC, 640 x 480 35.000 66.667 30.240 −/−
MAC, 832 x 624 49.726 74.551 57.284 −/−
MAC, 1152 x 870 68.681 75.062 100.000 −/−
VESA, 640 x 480 31.469 59.940 25.175 −/−
VESA, 640 x 480 37.861 72.809 31.500 −/−
VESA, 640 x 480 37.500 75.000 31.500 −/−
VESA, 800 x 600 35.156 56.250 36.000 +/+
VESA, 800 x 600 37.879 60.317 40.000 +/+
VESA, 800 x 600 48.077 72.188 50.000 +/+
VESA, 800 x 600 46.875 75.000 49.500 +/+
VESA, 1024 x 768 48.363 60.004 65.000 −/−
VESA, 1024 x 768 56.476 70.069 75.000 −/−
VESA, 1024 x 768 60.023 75.029 78.750 +/+
VESA, 1152 x 864 67.500 75.000 108.000 +/+
108
Chapter 8. Appendix
Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V)
VESA, 1280 x 720 45.000 60.000 74.250 +/+
VESA, 1280 x 800 49.702 59.810 83.500 −/+
VESA, 1280 x 1024 63.981 60.020 108.000 +/+
VESA, 1280 x 1024 79.976 75.025 135.000 +/+
VESA, 1366 x 768 47.712 59.790 85.500 +/+
VESA, 1440 x 900 55.935 59.887 106.500 −/+
VESA, 1600 x 900 60.000 60.000 108.000 +/+
VESA, 1680 x 1050 65.290 59.954 146.250 −/+
VESA, 1920 x 1080 67.500 60.000 148.500 +/+
109
Chapter 8. Appendix
Responsibility for the pay service (Cost to Customers)
When the service is requested, in spite of in warranty, we may charge you for a visit
from a service technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
• If a service technician gives instructions on how to use product or simply adjusts
options without disassembling product.
• If a defect is caused by external environmental factors (Internet, Antenna, Wired
Signal, etc.)
• If a product is reinstalled or devices are connected additionally after installing the
purchased product for the rst time.
• If a product is reinstalled to move to a different spot or to move to a different house.
• If customer requests instructions on how to use because of another company’s
product.
• If customer requests instructions on how to use the network or another company’s
programme.
• If customer requests software installation and setup for the product.
• If a service technician removes/cleans dusts or foreign materials inside of the
product.
• If customer requests an installation additionally after purchasing a product through
homeshopping or online.
A product damage caused by customer’s fault
Product damage caused by customer’s mishandling or wrong repair
If a product damage is caused by;
• External impact or drop.
• Use of supplies or separatly sold product unspecied by Samsung.
• Repair from a person besides an engineer of outsourcing service company or partner
of Samsung Electronics Co., Ltd.
• Remodeling or repairing the product by customer.
• Using it with incorrect voltage or non-authorised electrical connections.
• Not following the “cautions” in User Manual.
Others
• If product fails by natural disaster. (lightning, re, earthquake, ood damage, etc)
• If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head,
Vibrator, Lamp, Filter, Ribbon, etc.)
If customer requests a service in case the product has no defect, service fee may
be charged. So please read User Manual rst.
110
Chapter 8. Appendix
Optimum picture quality and afterimage burn-in
prevention
Optimum picture quality
• Due to the nature of the manufacturing of this product, approximately 1 pixel per
million (1ppm) may be brighter or darker on the panel. This does not affect product
performance.
‒ The number of sub-pixels by panel type: 6,220,800
• Run Auto Adjustment to improve the picture quality. If noise is still found even after
auto adjustment, adjust Coarse or Fine.
• Leaving the screen xed on a stationary image for an extended period of time may
cause afterimage burn-in or defective pixels.
‒ Activate power saving mode or a dynamic screen saver if you will not be using the
product for an extended period of time.
Prevention of afterimage burn-in
What is afterimage burn-in?
Afterimage burn-in should not occur when the LCD panel is operating normally.
Normal operation refers to a continuously changing video pattern. If the LCD panel
displays a xed pattern for an extended period of time (more than 12 hours), a slight
voltage difference may occur between the electrodes in pixels that control the liquid
crystals.
Such a voltage difference between electrodes increases with time and makes the
liquid crystals thinner. When this occurs, a previous image can remain on the screen
when the pattern changes. To prevent this, the accumulated voltage difference should
be reduced.
Afterimage burn-in should not occur when an LCD panel is operating in proper
conditions.
Black Matrix Common
Electrode
(ITO)
Colour-Filter
Gate
TFT
Data Bus-Line
Pixel
Electrode
(ITO)
Storage
Capaccitor (Cs)
Source Drain
111
Chapter 8. Appendix
Preventing afterimage burn-in
The best way to protect the product from afterimage burn-in is switching the power
off or setting the PC or system to run a screen saver when not in use. Also, Warranty
service may be limited depending on instruction guide.
• Powering Off, Screen Saver and Power Saving Mode
‒ Power off the product for 2 hours after using it for 12 hours.
‒ Go to Display Properties > Power Supply on your PC and set the product to power
off as required.
‒ Using a screen saver is recommended.
It is best to use a single-colour or moving-image screen saver.
• Regular colour change
‒ Use 2 colours.
Switch between 2 colours every 30 minutes as shown above.
FLIGHT FLIGHT
TIME TIME
OZ348
UA102 21:10
20:30
OZ348
UA102 21:10
20:30
Type 1 Type 2
• Avoid combinations of a text colour and background colour of contrasting
brightness. (Brightness: refers to the lightness or darkness of a colour which varies
depending on the amount of light emitted.)
• Avoid using grey as it may contribute to afterimage burn-in.
• Avoid using colours of contrasting brightness (black and white; grey).
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
• Regular Text colour Change
‒ Use bright colours of similar brightness.
Interval: Change text colour and background colour every 30 minutes.
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
‒ Move and change text every 30 minutes as shown below.
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348
:
:20:30
Step 1
Step 3
Step 2
‒ Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for
4 hours.
112
Chapter 8. Appendix
License
Manufactured under licence from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Ⓡ
Manufactured under a licence from U.S. Patent No’s: 5,956,674,
5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467,
7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and
7,548,853. DTS, the Symbol, and DTS and the Symbol together are
registered trademarks & DTS Premium Sound is a trademark of
DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
ⓇManufactured under a license from U.S. Patent No’s: 6,285,767,
8,027,477, 5,319,713, 5,333,201, 5,638,452, 5,771,295, 5,970,152,
5,912,976, 7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474,
7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the
Symbol together are registered trademarks & DTS Studio Sound is
a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Denition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
DivX Certied® to play DivX® video up to HD 1080p, including
premium content.
DivX®, DivX Certied® and associated logos are trademarks of
DivX, LLC and are used under license.
This DivX Certied® device has passed rigorous testing to ensure
it plays DivX® video.
To play purchased DivX movies, rst register your device at vod.
divx.com. Find your registration code in the DivX VOD section of
your device setup menu.
Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 8,656,183; 8,731,369; RE45,052.
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the
product menu. Open Source Licence Notice is written only English.
For information on the Open Source Licence Notice, contact the Samsung Customer
Centre or send email to oss.request@samsung.com.