Samsung LH55OMDPWBC User Manual
Displayed below is the user manual for LH55OMDPWBC by Samsung which is a product in the Signage Displays category. This manual has pages.
Related Manuals
User Manual
The colour and the appearance may differ depending on the
product, and the specifications are subject to change without
prior notice to improve the performance.
OM46D-W OM55D-W OM75D-W
OM46D-K OM55D-K OM75D-K
Table of contents
Before Using the Product
» Copyright
» Safety Precautions
Preparations
» Parts
» Before Installing the Product (Installation Guide)
» Dimensions
» Installing the Wall Mount
Connecting and Using a Source Device
» Before Connecting
» Connecting to a PC
» Connecting to a Video Device
» Connecting to an Audio System
» Connecting the LAN Cable
» Connecting the network box (Sold separately)
» Changing the Input source
Using MDC
» MDC Programme Installation/Uninstallation
» Connecting to MDC
Home feature
» Player
» Schedule
» Template
» Clone Product
» ID Settings
» Video Wall
» Network Status
» Picture Mode
» On/Off Timer
» Ticker
» More settings
» URL Launcher
Screen Adjustment
» Picture Mode
» Backlight / Contrast / Brightness / Sharpness / Colour /
Tint (G/R)
» Colour Temperature
» White Balance
» Gamma
» Calibrated value
» Advanced Settings
» Picture Options
» Picture Size
» Auto Adjustment
» PC Screen Adjustment
» Picture Off
» Reset Picture
OnScreen Display
» PIP
» Display Orientation
» Screen Protection
» Message Display
» Menu Transparency
» Menu Language
» Reset OnScreen Display
Sound Adjustment
» Sound Mode
» Sound Effect
» HDMI Sound
» Sound on Video Call
» Speaker Settings
» Auto Volume
» Reset Sound
Table of contents
Network
» Network Status
» Network Settings
» Wi-Fi Direct
» Multimedia Device Settings
» Screen Mirroring
» Server Network Settings
» Device Name
System
» Setup
» Time
» Auto Source Switching
» Power Control
» Eco Solution
» Fan and Temperature
» Device Manager
» Play via
» Change PIN
» General
» Reset System
Support
» Software Update
» Contact Samsung
» Go to Home
» Reset All
Playing photos, videos and music
(Media Play)
» Features provided in the media content list page
» Available buttons and features during photo playback
» Available buttons and features during video playback
» Available buttons and features during music playback
» Supported Subtitle and Media play file formats
Troubleshooting Guide
» Requirements Before Contacting Samsung Customer
Service Centre
» Q & A
Specifications
» General
» PowerSaver
» Preset Timing Modes
Appendix
» Responsibility for the Pay Service
(Cost to Customers)
» WEEE
» Optimum Picture Quality and Afterimage Burn-in
Prevention
» Licence
» Terminology
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2014 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.
•An administration fee may be charged if either
-(a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
-(b) you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
•The amount of such administration charge will be advised to you before any work or home visit is carried out.
Safety Precautions
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been
included with this product.
Symbols
Warning
A serious or fatal injury may result if instructions are not followed.
Caution
Personal injury or damage to properties may result if instructions are not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
Cleaning
―Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
―Take the following steps when cleaning.
―The following images are for reference only. Real-life situations may differ from what is shown in the
images.
1
Power off the product and computer.
2
Disconnect the power cord from the product.
―Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
!
3
Wipe the product with a clean, soft and dry cloth.
•Do not use detergents that contain alcohol, solvent or
surface-active agents.
•Do not spray water or detergent directly on the product.
4
Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the product.
5
Connect the power cord to the product when cleaning is finished.
6
Power on the product and computer.
Storage
Due to the characteristics of high-glossy products, using a UV humidifier nearby may create
white-coloured stains on the product.
―Contact Customer Service Centre if the inside of the product needs cleaning (service fee will be
charged).
Electricity and Safety
―The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
•An electric shock or fire may result.
Do not use multiple products with a single power socket.
•Overheated power sockets may cause a fire.
Do not touch the power plug with wet hands. Otherwise, an electric shock
may result.
!
Insert the power plug all the way in so it is not loose.
•An unsecure connection may cause a fire.
!
Connect the power plug to a grounded power socket
(type 1 insulated devices only).
•An electric shock or injury may result.
Do not bend or pull the power cord with force. Be careful not to leave the
power cord under a heavy object.
•Damage to the cord may result in a fire or electric shock.
Do not place the power cord or product near heat sources.
•A fire or electric shock may result.
!
Clean any dust around the pins of the power plug or the power socket with
a dry cloth.
•A fire may result.
Caution
Do not disconnect the power cord while the product is being used.
•The product may become damaged by an electric shock.
!
Only use the power cord provided with your product by Samsung. Do not
use the power cord with other products.
•A fire or electric shock may result.
!
Keep the power socket where the power cord is connected unobstructed.
•The power cord must be disconnected to cut off power to the product
when an issue occurs.
•Note that the product is not completely powered down by using only
the power button on the remote.
!
Hold the plug when disconnecting the power cord from the power socket.
•An electric shock or fire may result.
Installation
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF
THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
•A fire may result.
!
Have a technician install the wall-mount hanger.
•Installation by an unqualified person can result in an injury.
•Only use approved cabinets.
Do not install the product in poorly ventilated spaces such as a bookcase or
closet.
•An increased internal temperature may cause a fire.
!
Install the product at least 10cm away from the wall to allow ventilation.
•An increased internal temperature may cause a fire.
!
Keep the plastic packaging out of the reach of children.
•Children may suffocate.
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.)
•The product may fall and become damaged and/or cause an injury.
•Using the product in an area with excess vibration may damage the
product or cause a fire.
!
Do not install the product in a vehicle or a place exposed to dust, moisture
(water drips, etc.), oil, or smoke.
•A fire or electric shock may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
•The product lifespan may be reduced or a fire may result.
Do not install the product within the reach of young children.
•The product may fall and injure children.
•As the front is heavy, install the product on a flat and stable surface.
Edible oil, such as soybean oil, can damage or deform the product. Do not
install the product in a kitchen or near a kitchen counter.
Caution
!
Do not drop the product while moving.
•Product failure or personal injury may result.
Do not set down the product on its front.
•The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the
bottom edge of the front of the product is not protruding.
•The product may fall and become damaged and/or cause an injury.
•Install the product only on cabinets or shelves of the right size.
!
Set down the product gently.
•Product failure or personal injury may result.
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of fine
dust, chemical substances, extreme temperatures or a significant presence
of moisture, or a place where the product will operate continuously for an
extended period of time) may seriously affect its performance.
•Be sure to consult Samsung Customer Service Centre if you want to
install the product at such a place.
Operation
Warning
There is a high voltage inside the product. Never disassemble, repair or
modify the product yourself.
•A fire or electric shock may result.
•Contact Samsung Customer Service Centre for repairs.
!
Before moving the product, turn off the power switch and disconnect the
power cable and all other connected cables.
•Otherwise, the power cord may be damaged and a fire or electric
shock may result.
!
If the product generates abnormal sounds, a burning smell or smoke,
disconnect the power cord immediately and contact Samsung Customer
Service Centre.
•An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
•Children may become injured or seriously harmed.
If the product is dropped or the outer case is damaged, turn off the power
switch and disconnect the power cord. Then contact Samsung Customer
Service Centre.
•Continued use can result in a fire or electric shock.
Do not leave heavy objects or items that children like (toys, sweets, etc.) on
top of the product.
•The product or heavy objects may fall as children try to reach for the
toys or sweets resulting in a serious injury.
!
During a lightning or thunderstorm, power off the product and remove the
power cable.
•A fire or electric shock may result.
!
Do not drop objects on the product or apply impact.
•A fire or electric shock may result.
Do not move the product by pulling the power cord or any cable.
•Product failure, an electric shock or fire may result from a damaged
cable.
!GAS
If a gas leakage is found, do not touch the product or power plug. Also,
ventilate the area immediately.
•Sparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cord or any cable.
•Product failure, an electric shock or fire may result from a damaged
cable.
!
Do not use or keep combustible spray or an inflammable substance near
the product.
•An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
•An increased internal temperature may cause a fire.
100
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects
that burn easily (paper, matches, etc) into the product (via the vent or input/
output ports, etc).
•Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Centre.
•Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
•Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Centre.
•Product failure, an electric shock or fire may result.
Caution
!
Leaving the screen fixed on a stationary image for an extended period of
time may cause afterimage burn-in or defective pixels.
•Activate power-saving mode or a moving-picture screen saver if you
will not be using the product for an extended period of time.
-_-
!
Disconnect the power cord from the power socket if you do not plan on
using the product for an extended period of time (vacation, etc).
•Dust accumulation combined with heat can cause a fire, electric shock
or electric leakage.
!
Use the product at the recommended resolution and frequency.
•Your eyesight may deteriorate.
Do not hold the product upside-down or move it by holding the stand.
•The product may fall and become damaged or cause an injury.
!
Looking at the screen too close for an extended period of time can
deteriorate your eyesight.
Do not use humidifiers or stoves around the product.
•A fire or electric shock may result.
!
Rest your eyes for more than 5 minutes for every 1 hour of product use.
•Eye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an
extended period of time as it will become hot.
!
Store small accessories out of the reach of children.
!
Exercise caution when adjusting the product angle or stand height.
•Your hand or finger may get stuck and injured.
•Tilting the product at an excessive angle may cause the product to fall
and an injury may result.
Do not place heavy objects on the product.
•Product failure or personal injury may result.
When using headphones or earphones, do not turn the volume too high.
•Having the sound too loud may damage your hearing.
Be careful that children do not place the battery in their mouths when
removed from the remote control. Place the battery in a location that
children or infants cannot reach.
•If children have had the battery in their mouths, consult your doctor
immediately.
When replacing the battery, insert it with the right polarity (+, -).
•Otherwise, the battery may become damaged or it may cause fire,
personal injury or damage due to leakage of the internal liquid.
!
Use only the specified standardized batteries, and do not use a new battery
and a used battery at the same time.
•Otherwise, the batteries may be damaged or cause fire, personal injury
or damage due to a leakage of the internal liquid.
!
The batteries (and rechargeable batteries) are not ordinary refuse and must
be returned for recycling purposes. The customer is responsible for returning
the used or rechargeable batteries for recycling.
•The customer can return used or rechargeable batteries to a nearby
public recycling centre or to a store selling the same type of the
battery or rechargeable battery.
-Contact the vendor where you
purchased the product if any
components are missing.
-The appearance of the components and
items sold separately may differ from the
image shown.
-A stand is not provided with the product.
To install a stand, you can purchase one
separately.
Checking the Components
Components
―Components may differ in different locations.
+
+
-
-
Quick Setup Guide
Warranty card
(Not available in some
locations)
Regulatory guide Batteries
(Not available in some locations)
Remote Control Power cord D-SUB cable Holder-Ring (4EA)
External remote control sensor
Preparations
Items sold separately
-The following items can be purchased
at your nearest retailer.
Wall-mount Kit Stand RS232C-Stereo cable DVI cable HDMI-DVI cable
DP cable HDMI cable Video cable Stereo cable Component cable
RCA stereo cable RCA cable AV/Component adapter AUDIO adapter LAN cable
Network Box (SBB)
DP-DVI cable
(Used to connect a network
box)
Magic Presenter
Parts
Control Panel
ON
OM46D OM55D
OM75D
Panel Key POWER
―The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to
improve quality.
―The OM**D-K model does not come with a BACK-COVER.
Panel Key
Buttons Description
Power on the product.
If you press the button when the product is turned on, the control menu will be
displayed.
―To exit the OSD menu, press and hold the panel key for at least one second.
Move to the upper or lower menu. You can also adjust the value of an option.
Move to the left or right menu.
―You can adjust the volume by moving the panel key left or right when the control
menu is not displayed.
―If you press the button on the panel key when the product is turned on, the
control menu will be displayed.
Control menu
Return
Buttons Description
Source
Select the connected input source.
Move the panel key right to select Source in the control menu. When the list of
input sources is displayed, move the panel key left or right to select the desired input
source. Next, press the panel key.
MENU
Display the OSD menu.
Move the panel key left to select menu in the control menu. The OSD control
screen will appear. Move the panel key right to select the desired menu. You can
select a sub-menu item by moving the panel key up, down, left, or right. To change
settings, select the desired menu and press the panel key.
Home
Enter Home mode.
Move the panel key up to select Home in the control menu.
Power o
Power off the product.
Move the panel key down to select Power off in the control menu. Next, press
the panel key.
Return
Exit the control menu.
External sensor KIT
OM46D OM55D
OM75D
―The external sensor is integrated with the remote control sensor, light sensor and power indicator.
If mounting the display onto a wall, you can move the External sensor KIT to the side of the display.
―The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to
improve quality.
―The OM**D-K model does not come with a BACK-COVER.
Parts Description
Light sensor
Automatically detects the intensity of ambient light around a selected display and
adjusts the screen brightness.
Remote Control Sensor
Aim the remote control towards this spot on the LCD Display.
―Using other display devices in the same space as the remote control of this
product can cause the other display devices to be inadvertently controlled.
Power indicator
Turns off in power-on mode and blinks green in power-saving mode.
Use the remote control within 7m to 10m from the sensor on the product at an angle of 30 from the left and right.
―Store used batteries out of reach of children and recycle.
―Do not use a new and used battery together. Replace both batteries at the same time.
―Remove batteries when the remote control is not to be used for an extended period of time.
―If you disconnect the power cord from the product while it is in standby mode, the product remains in standby mode until
it runs out of power. The power indicator turns on or blinks during this time. If you reconnect the power cord, the input
source activates and the product resumes normal operation.
Reverse Side
―The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
―The OM**D-K model does not come with a BACK-COVER.
OM46D
OM55D
OM75D
Connect network boxes to the
indicated areas
Port Description
IR OUT
Receives the remote control signal via the external sensor board and outputs
the signal via LOOP OUT.
CONTROL IN / ALU
Supplies power to the external sensor board or receives the light sensor
signal.
DVI IN (MAGICINFO)
DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGICINFO: To use MagicInfo, make sure to connect the DP-DVI cable.
HDMI IN 1, HDMI IN 2
Connects to a source device using an HDMI cable.
DP IN
Connects to a PC using a DP cable.
RGB IN
Connects to a source device using a D-SUB cable.
DP OUT (LOOPOUT)
Connects to another product using a DP cable.
Port Description
AV / COMPONENT IN
Connects to a source device using the AV/Component adapter.
AUDIO OUT
Connects to the audio of a source device.
AUDIO IN
Receives sound from a PC via an audio cable.
RJ45
Connects to MDC using a LAN cable.
USB
Connect to a USB memory device.
RS232C OUT
Connects to MDC using an RS232C cable.
RS232C IN
SD CARD
Connect to an SD memory card.
Anti-theft Lock
―An anti-theft lock allows you to use the product securely even in public places.
―The locking device shape and locking method depend on the manufacturer. Refer to the user guide
provided with your anti-theft locking device for details.
―The following images are for reference only. Real-life situations may differ from what is shown in the
images.
To lock an anti-theft locking device:
1
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2
Put one end of the cable through the loop on the other end.
3
Insert the locking device into the anti-theft lock slot at the back of the product.
4
Lock the locking device.
-An anti-theft locking device can be purchased separately.
-Refer to the user guide provided with your anti-theft locking device for details.
-Anti-theft locking devices can be purchased at electronics retailers or online.
Spacer logo
Do not pull on the spacer logo using force. The logo may tear or break off.
-Remote control button functions may
differ for different products.
-Remove batteries when the remote
control is not to be used for an extended
period of time.
-Using other display devices in the same
space as the remote control of this
product can cause the other display
devices to be inadvertently controlled.
-Buttons without descriptions in the image
are not supported.
Remote Control
―Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
―A button without a description in the image below is not supported on the product.
HOME
MENU
POWER
OFF
VOL
MagicInfo
Player I
.QZ
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
SYMBOL
0
PRS
7
TUV
8
WXY
9
MUTE
SOURCE
CH
DEL-/-- CH LIST
Power off the product.
Number buttons
Enter the password in the OSD menu.
Mute the sound.
Unmuting the sound: Press MUTE again or press
the volume control(+ VOL -) button.
Go to Home Launch Button.
Use this hotkey to directly access MagicInfo.
The hotkey works if the network box is
connected.
Power on the product.
Adjust the volume.
Change the input source.
Display or hide the onscreen display menu, or
return to the previous menu.
TOOLS INFO
SET
UNSET
LOCK
PC
A
DVI
B
HDMI
C
DP
D
EXITRETURN
IR control
Display information about the current input
source.
Move to the upper, lower, left or right menu, or
adjust an option's setting.
Confirm a menu selection.
Exit the current menu.
Manually select a connected input source from
PC, DVI, HDMI, or DisplayPort.
It sets safe lock function.
Used in Anynet+ mode and multimedia mode.
Quickly select frequently used functions.
Return to the previous menu.
If multiple products are connected through the
Video Wall feature, press the SET button and
enter a product ID using the number buttons.
Control the product using the remote control.
Cancel a value that has been set using the SET
button and control all connected products using
the remote control.
-Remote control button functions may
differ for different products.
To place batteries in the remote control
Connection Using an IR Stereo Cable
(sold separately)
Make sure to connect the External ambient sensor while the product is powered
off. Then, power on the product.
Controlling more than one display product using
your remote control
•Connect the IR OUT port on the product to the CONTROL IN port on the
other display product using the dedicated stereo cable.
•A command sent from the remote control pointed at product
1
will be
received by both display products
1
and
2
.
―The appearance may differ depending on the product.
1 2
IR OUT CONTROL IN
Controlling more than one display product using an
External ambient sensor (sold separately)
•A command sent from the remote control pointed at product
1
(to which
the External ambient sensor is connected) will be received by both display
products
1
and
2
.
―The appearance may differ depending on the product.
1 2
IR OUT CONTROL INCONTROL IN /
ALU
Before Installing the Product
(Installation Guide)
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
•Ensure that an authorized installation company installs the wall mount.
•Otherwise, it may fall and cause personal injury.
•Make sure to install the specified wall mount.
Switching between portrait and landscape
―Contact Samsung Customer Service Centre for further details.
•To use the product in portrait orientation, rotate it clockwise.
A
B
Figure 1.1 Side view
Ventilation
Installation on a Perpendicular Wall
A Minimum 40 mm
B Ambient temperature: Under 35 C
•When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and wall surface
for ventilation and ensure that the ambient A temperature is kept below 35 C.
A
B
C
E
Figure 1.3 Side view
D D
Figure 1.2 Side view
Installation on an Indented Wall
―Contact Samsung Customer Service Centre for further details.
Plane view
A Minimum 40 mm
B Minimum 70 mm
C Minimum 50 mm
D Minimum 50 mm
E Ambient temperature: Under 35 C
―When installing the product on an indented wall, allow at least the space specified above between the product and wall for
ventilation and ensure that the ambient temperature is kept below 35 C.
Dimensions
1
2
3
4
5
Unit: mm (inches)
Model name
1
1
2
2
34
3
4
5
OM46D-W 1035.9 (40.8) 1020.1 (40.2) 574.7 (22.6) 590.5 (23.2) 139.0 (5.5)
OM55D-W 1227.4 (48.3) 1211.6 (47.7) 682.4 (26.9) 698.2 (27.5) 139.5 (5.5)
OM75D-W 1675.8 (66.0) 1652.4 (65.1) 930.4 (36.6) 953.8 (37.6) 124.6 (4.9)
Model name
1
1
2
2
34
3
4
5
OM46D-K 1035.9 (40.8) 1020.1 (40.2) 574.7 (22.6) 620.5 (24.4) 142.9 (5.6)
OM55D-K 1227.4 (48.3) 1211.6 (47.7) 682.4 (26.9) 728.2 (28.7) 143.2 (5.6)
OM75D-K 1675.8 (66.0) 1652.4 (65.1) 930.4 (36.6) 983.8 (38.7) 123.1 (4.8)
―All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your product. Not responsible for typographical or printed errors.
Installing the Wall Mount Preparing before installing Wall-Mount
To install a wall-mount from another manufacturer, use the Holder-Ring.
Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the product on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the
wall mount on your own.
Wall Mount Kit Specications (VESA)
―Install your wall mount on a solid wall perpendicular to the floor. Before
attaching the wall mount to surfaces other than plaster board, please contact
your nearest dealer for additional information.
If you install the product on a slanted wall, it may fall and result in severe
personal injury.
•Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
•Do not use screws that are longer than the standard length or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the product.
•For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
•Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
•Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
•Always have two people mount the product on a wall.
•Standard dimensions for wall mount kits are shown in the table below.
Unit: mm (inches)
Model name VESA screw hole
specs (A * B) in
millimeters
Standard Screw Quantity
OM46D-W / OM46D-K 600 × 400 (23.6 × 15.7) M8*L22 4
OM55D-W / OM55D-K 600 × 400 (23.6 × 15.7) M8*L22 4
OM75D-W / OM75D-K 900 × 600 (35.4 × 23.6) M8*L22 4
―Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock.
Connecting and Using a Source Device
Before Connecting
Pre-connection Checkpoints
―Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
―Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
―Connect the sound ports correctly: left = white and right = red.
―Check the types of ports at the back of the product you want to connect.
Connecting to a PC
•Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•A PC can be connected to the product in a variety of ways.
Select a connection method suitable for your PC.
―Connecting parts may differ in different products.
Connection using the D-SUB cable (Analogue type)
RGB IN
AUDIO IN
―The OM**D-K model does not have internal speakers. To enable audio, connect an external sound
output device to the AUDIO OUT port.
Connection using a DVI cable (Digital type)
DVI IN (MAGICINFO)
AUDIO IN
―The OM**D-K model does not have internal speakers. To enable audio, connect an external sound
output device to the AUDIO OUT port.
Connection Using an HDMI-DVI Cable
After connecting a computer to the product with an HDMI-DVI cable, make sure to configure the settings
as shown below to enable the video and audio from the computer.
•Sound set HDMI Sound to PC(DVI)
•Picture set each screen mode to Text under Picture Mode
•System General set HDMI Hot Plug to Off
HDMI IN 1, HDMI IN 2
AUDIO IN
―The OM**D-K model does not have internal speakers. To enable audio, connect an external sound
output device to the AUDIO OUT port.
Connection Using an HDMI Cable
HDMI IN 1, HDMI IN 2
―The OM**D-K model does not have internal speakers. To enable audio, connect an external sound
output device to the AUDIO OUT port.
Connection Using an DP Cable
DP IN
•Precautions for using DP
―To increase the standby power capacity, the product stops DP communication when it is turned
off or in power-saving mode.
If the product in dual monitor mode is turned off or goes into power-saving mode, monitor
setting changes may not be updated. As a result, screen output may not be displayed properly.
In the occurrence of this issue, set Max. Power Saving to Off before using the product.
―Some graphics cards that are not compliant with the DP standard may prevent the Windows
Booting/Bios screen from being displayed when the product is in power-saving mode. If this is
the case, make sure to turn on the product first before turning on your PC.
―The DisplayPort interface (DP IN) on the product and the provided DP cable are designed based
on the VESA standards. Using a DP cable that is not VESA compliant may cause the product to
function improperly. Samsung Electronics shall not be held responsible for any issues from using
a cable that is not VESA compliant.
Make sure to use a DP cable that is VESA compliant.
―The OM**D-K model does not have internal speakers. To enable audio, connect an external sound
output device to the AUDIO OUT port.
Connecting to a Video Device
•Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•You can connect a video device to the product using a cable.
―Connecting parts may differ in different products.
―Press the SOURCE button on the remote control to change the source.
Connection Using the AV Cable
AV / COMPONENT IN
AUDIO IN
―The OM**D-K model does not have internal speakers. To enable audio, connect an external sound
output device to the AUDIO OUT port.
Connection Using the component Cable
AV / COMPONENT IN
AUDIO IN
―The OM**D-K model does not have internal speakers. To enable audio, connect an external sound
output device to the AUDIO OUT port.
Connection Using an HDMI-DVI Cable
―Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To
resolve this, additionally connect an audio cable to the audio ports on the product and video device.
―After connecting a video device to the product with an HDMI-DVI cable, make sure to configure the
settings as shown below to enable the video and audio from the video device.
•Sound set HDMI Sound to PC(DVI)
•Picture set each screen mode to Text under Picture Mode
•System General set HDMI Hot Plug to Off
―Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.
HDMI IN 1, HDMI IN 2
AUDIO IN
―The OM**D-K model does not have internal speakers. To enable audio, connect an external sound
output device to the AUDIO OUT port.
Connection Using an HDMI Cable
Using an HDMI cable or HDMI to DVI Cable (up to 1080p)
•For better picture and audio quality, connect to a digital device using an HDMI cable.
•An HDMI cable supports digital video and audio signals, and does not require an audio cable.
-To connect the product to a digital device that does not support HDMI output, use an HDMI-
DVI and audio cables.
•The picture may not display normally (if at all) or the audio may not work if an external device that
uses an older version of HDMI mode is connected to the product. If such a problem occurs, ask the
manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
•Be sure to use an HDMI cable with a thickness of 14 mm or less.
•Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection
error may occur.
•A basic high-speed HDMI cable or one with ethernet is recommended.
This product does not support the ethernet function via HDMI.
HDMI IN 1, HDMI IN 2
―The OM**D-K model does not have internal speakers. To enable audio, connect an external sound
output device to the AUDIO OUT port.
Connecting to an Audio System
―Connecting parts may differ in different products.
AUDIO OUT
Connecting the LAN Cable
―Connecting parts may differ in different products.
RJ45
•Use Cat7(*STP Type) cable for the connection.
*Shielded Twist Pair
Connecting the network box (Sold separately)
―The OM**D-K model does not come with a BACK-COVER.
Connect network boxes to the
indicated areas
OM46D
OM55D
OM75D
Installing the Network Box
―The appearance may differ depending on the product.
―For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase.
Lay a soft blanket on the ground for protection. Next,
place the product with the front facing down onto the
blanket.
Unfasten the screws and remove the cover.
Insert the network box in the direction of the arrow.
Fasten the network box using the screws.
Connecting the Power
―Network boxes are sold separately.
1
Connect the power cables from the product and network box to the power outlet.
2
Turn on the power switch.
OM46D OM55D OM75D
MagicInfo
To use MagicInfo, a network box (sold separately) must be connected to the product.
―To change the MagicInfo settings, run "MagicinfoSetupWizard" on the desktop.
―For details on how to use MagicInfo, refer to the DVD provided with the network box.
―The information in this section is subject to change without notice for quality improvement.
―If a problem occurs after installing an operating system other than the one provided with the network box, restoring the previous version of the operating system, or
installing software that is not compatible with the operating system provided, you will not be able to benefit from technical support and will be charged a fee for a visit
from a service technician. A product exchange or refund will also not be available.
MagicInfo Setup Wizard - v.1.12
Select Application - step 1
MagicInfo Pro (LAN, WAN based version)
MagicInfo-i Premium (Web-based version)
Select Later
< Back(B) Next(N) > Finish Cancel
Entering MagicInfo mode
1
After installing and connecting the network box (sold separately) to the product, power on the product.
2
Press SOURCE on the remote control, and select MagicInfo.
―Connecting the network box to the DVI IN (MAGICINFO) port on the product will change Source from DVI to MagicInfo.
3
Select the default application you want to run when MagicInfo starts.
MagicInfo Setup Wizard - v.1.12
Select TCP/IP - step 2
Obtain an IP address automatically
Use the following IP address:
IP address:
Subnet mask:
Default gateway:
192 . 168 . 0 . 102
255 . 255 . 255 . 0
192 . 168 . 0 . 1
Obtain DNS server address automatically
Use the following DNS server address:
Preferred DNS server:
Alternate DNS server:
10 . 44 . 33 . 22
10 . 33 . 22 . 11
< Back(B) Next(N) > Finish Cancel
4
Enter the IP information.
MagicInfo Setup Wizard - v.1.12
Select Language -step 3
Select the language you want to install on the system for menus and
dialogs.
Current Language : Engilsh
German
English
French
Italian
Chinese [Traditional]
Japanese
Korean
Russian
Swedish
Turkish
Chinese [Simplified]
Portuguese
< Back(B) Next(N) > Finish Cancel
5
Select a language. (The default
language is English.)
MagicInfo Setup Wizard - v.1.12
Select Screen Type - step 4
Landscape
Portrait
< Back(B) Next(N) > Finish Cancel
6
Select a display mode.
MagicInfo Setup Wizard - v.1.12
Setup Information
1. Application : MagicInfo Pro [LAN,WAN based version\
2. Internet Protocol [TCP/IP]
IP : 192.168.0.102
3. Language : English
4. Screen Type : Landscape
Do not show again
< Back(B) Apply Finish Cancel
7
Double-check the settings you have
just configured.
―If the execution icon does not appear,
double-click the MagicInfo icon on
the desktop. The icon will appear at the
bottom right of the screen.
Changing the Input source
Source
SOURCE → Source
Source
HDMI1 HDMI2 AV DisplayPortComponent PC
To go to Options, press and hold the Enter button.
-The displayed image may differ depending on the model.
Source allows you to select a variety of sources and change source device names.
You can display the screen of a source device connected to the product. Select a source from source list to display the screen
of the selected source.
―The input source can also be changed by using the SOURCE button on the remote control.
―The screen may not display correctly if an incorrect source is selected for the source device you want to convert to.
―To view detailed information about connected source devices, press the TOOLS button from the Source page.
Edit Name
SOURCE → Source → TOOLS → Edit Name → ENTER E
Customize the name of a connected external device.
―The list can include the following source devices. Source devices on the list differ depending on the selected source.
PC / Cable STB / Satellite STB / PVR STB / Game / Blu-ray / DVD / VCR / AV Receiver / Camcorder / DVI PC / DVI
Devices / TV / IPTV / HD DVD / DMA
Information
SOURCE → Source → TOOLS → Information → ENTER E
You can see detailed information about the selected external device.
Using MDC
MDC Programme Installation/Uninstallation
Installation
―MDC installation can be affected by the graphics card, mother board and network conditions.
1
Click the MDC Unified installation programme.
2
Select a language for installation. Next, click "OK".
3
When the "Welcome to the InstallShield Wizard for MDC_Unified" screen appears, click "Next".
4
In the "License Agreement" window displayed, select
"I accept the terms in the license agreement" and click "Next".
5
In the displayed "Customer Information" window, fill out all the information fields and click
"Next".
6
In the displayed "Destination Folder" window, select the directory path you want to install the
programme in and click "Next".
―If the directory path is not specified, the programme will be installed in the default directory
path.
7
In the displayed "Ready to Install the Program" window, check the directory path to install the
programme in and click "Install".
8
Installation progress will be displayed.
9
Click "Finish" in the displayed "InstallShield Wizard Complete" window.
―Select "Launch MDC Unified" and click "Finish" to run the MDC programme immediately.
10
The MDC Unified shortcut icon will be created on the desktop after installation.
―The MDC execution icon may not be displayed depending on the PC system or product
specifications.
―Press F5 if the execution icon is not displayed.
Uninstallation
1
Select Settings > Control Panel on the Start menu and double-click Add/Delete Program.
2
Select MDC Unified from the list and click Change/Remove.
Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC.
- For details on how to use the MDC programme, refer to Help after installing the programme. The MDC programme is available on the website.
Connecting to MDC
Using MDC via RS-232C (serial data communications standards)
An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
RS232C IN RS232C OUT
Monitor 1
Monitor 2
Computer
Using MDC via Ethernet
Enter the IP for the primary display device and connect the device to the PC. Display devices can be connected to each other using a LAN cable.
Connection using a direct LAN cable
―Multiple products can be connected using the RJ45 port on the product and the LAN ports on the HUB.
RJ45
HUB
Monitor 1
Monitor 2
Computer
Connection using a cross LAN cable
―Multiple products can be connected using the RS232C IN / OUT port on the product.
Monitor 1
Monitor 2
Computer
RS232C OUTRJ45
Home feature
―To use the Player feature, set Play via to MagicInfo in System.
Play a range of content such as channels with schedules assigned, templates or files.
Play channels or content using any of the following methods.
•Network Channel: Play content using the server.
―To run Network Channel, make sure the product is connected to the server.
•Local Channel: Play content in internal memory or from external memory.
Player
HOME → Player → ENTER E
Player
Play a variety of content, such as
scheduled channels, templates or files.
Clone Product
Picture Mode
ID Settings
On/Off Timer
Video Wall
Ticker
Network Status
More settings
Schedule Template
-The displayed image may differ depending on the model.
This feature is provided in Support → Go to Home.
Accessible using the HOME button on the remote control.
Approving a connected device from the server
•Set MagicInfo Mode to MagicInfo in Server Network Settings.
Approve and use the MagicInfo server now.
―First configure the server Network Settings before device approval.
1
Access the server you have assigned to your device.
2
Enter your ID and password to log in.
3
Select Device from the top menu bar.
4
Select MagicInfo from the menus on the left.
5
Select Unapproved from the sub-menus of MagicInfo.
6
Select the Approve button for your device from the list of unapproved MagicInfo devices.
7
Enter the information required to approve the device.
•Device Name: Enter the device name.
•Device Group: Select to specify the group.
•Location: Enter the current location of the device.
―Pressing the INFO button on the remote when a network schedule is running will display the details of
the schedule. Check that the correct device has been selected by viewing the device ID in the details.
8
Select the All menu to check that the device has been registered.
9
When the device is approved by the server, the schedule registered in the selected group will be
downloaded to the device. The schedule will run after it is downloaded.
―For further details on how to configure a schedule, refer to the <MagicInfo Server user's manual>.
―If a device is deleted from the list of devices approved by the server, the device will reboot to reset its
settings.
Setting the current time
A schedule may not run if the time set on the device is different from the server's current time.
1
Go to the tabs Device → Time.
2
Select your device.
3
Select Clock Set, and sync the time with the server.
•When connecting to the server for the first time, the time on the product is set using the GMT time
of the region where the server is installed.
•The time on the product can be changed from the server as shown in step 3.
•Turning the product off and then on again will restore the time setting on the product to the last
time that was set from the server.
―For further details on how to manage the time (scheduling, holiday management, etc.), refer to the
<MagicInfo Server user's manual>.
Network Channel
Play content, templates and schedules configured on the server.
•You can view whether the server is connected (approval) in the Player menu screen.
To view whether the server is connected when a Network Channel is running, press INFO on the remote.
1
Select Network Channel from the Player menu.
2
Network Channel will run.
Local Channel
Play a schedule or channel that was configured in the product.
1
Select Local Channel from the Player menu.
―The No channels message appears if no channel has been registered in Local Channel.
2
Local Channel will run.
My Templates
Play a template in My Templates stored in the internal memory of the product.
Player Device:Internal Contents: All Sort by: File Name Options
item(s)
Browse and play content stored on the selected device.
No channels
No channels
Network Channel
Local Channel
My Templates
-The displayed image may differ depending on the model.
Available features in the Player page
The Player list page provides the following features.
•Device
Select either Internal or USB to search for a desired device list.
-All / Internal / USB
•Contents
Select a content type as criterion to search for a desired content list.
-All / Video / Image / PDF / Flash / Office / My Templates
•Sort by
Specify the content sort criterion.
-File Name / Recently played
•Options
Menu items in the Player page
Option Name Operations
Play Selected
Select and play desired content.
Send
Copy content to another storage device.
Delete
Delete desired content.
Go to Multimedia
Play content using the media play feature.
Settings
Configure detailed properties of content.
―See the following page for details on the Settings feature.
Player page Settings menu
Settings
Settings
Aspect Ratio
Display Duration
Transition Effect
Content Orientation
Safely Remove USB Device
Landscape
Set whether to display content in the original aspect ratio or in full
screen size.
Close
-The displayed image may differ depending on the model.
Aspect Ratio
Set Aspect Ratio to either Original or Full.
•Full / Original
―This feature is only available for Videos, Images, PDF and Office files.
Display Duration
Set the duration for each page in a slideshow.
―This feature is only available for Images, PDF, Flash and Office files.
Transition Eect
Configure transition effects between pages or scenes in a slideshow or video file.
•None / Fade1 / Fade2 / Blind / Spiral / Checker / Linear / Stairs / Wipe / Random
―This feature is only available for Images files.
Content Orientation
Switch the orientation of playing content to Landscape or Portrait mode.
•Landscape / Portrait
―If Content Orientation is Portrait view, it does not support VP8 video codec.
―Source is not available when Content Orientation is set to Portrait.
Safely Remove USB Device
Safely removes USB memory
Reset Settings
Restore all the values under Settings to the default when the product was purchased.
When Content is Running
Viewing the details of the content that is running
Information
Type:
CH Number:
CH Name:
Software Version:
MAC ID:
Tags:
Server:
USB:
Storage for Network Channel
Schedule download:
Network Channel
No channels selected
No channels selected
B2B-EP-MIP-4510
FF-FF-FF-FF-FF-FF
None
Not connected
Not connected
Internal
No Schedule to download
OK
-The displayed image may differ depending on the model.
Press the INFO button on the remote control.
•Type : Type of channel currently playing
―Only applicable during Network Channel / Local Channel playback.
•CH Number: Number assigned to the channel currently playing
―Only applicable during Network Channel / Local Channel playback.
•CH Name: Name of the channel currently playing
―Only applicable during Network Channel / Local Channel playback.
•Software Version: Displays the software version of a device
•MAC ID: Displays the original identification number of a device
•Tags: Tag settings assigned to a device from the server
•Server: Displays the connection status (Connected, Disconnected or Not connected) of the server
•USB: Displays the connection status of a USB device
•Storage for Network Channel: View the location where content is saved.
•Schedule download: Displays the progress of a network schedule being downloaded from the server
Changing the settings for the content that is running
Music
Playlist Picture Mode Sound Mode Repeat
-The displayed image may differ depending on the model.
-This feature is not available when content is playing through Video Wall.
Press the TOOLS button on the remote control during content playback to configure settings such as Picture Mode and
Sound Mode.
•Playlist
View a list of content items currently playing.
•Music
Set the background music for the content currently playing.
•Picture Mode
Customizes the screen settings for the content currently playing
-Shops & Malls / Offices & Schools / Terminals & Stations / Video Wall / Calibration
•Sound Mode
Customizes the audio settings for the content currently playing
-Standard / Music / Movie / Clear Voice / Amplify
•Repeat
Set the repeat mode.
-One / All
File Formats Compatible with Player
•Supported file systems include FAT32 and NTFS.
•A file with a vertical and horizontal resolution larger than the maximum resolution cannot be
played.
Check the vertical and horizontal resolution of the file.
•Check the supported video and audio Codec types and Versions.
•Check the supported file versions.
-Flash version up to 10.1 is supported
-PowerPoint version up to 97 – 2007 is supported
•Only the last USB device that was connected is recognized.
Network Schedule Multiframe
Playback restrictions
•A maximum of two video files (Videos) can be played simultaneously.
•In portrait playback mode, only one video file can be played at a time.
•More than one Flash file cannot be played.
•For Office files (PPT and Word files) and PDF files, only one file type is supported at a time.
•LFD(.lfd) files are not supported.
Sound output restrictions
•More than one sound output cannot be used.
•Playback priority: Flash file > network BGM > local BGM > video file in the main frame selected
by the user
―Network BGM: Settings can be configured in step 1 when creating a server schedule.
―Local BGM: BGM settings can be configured using the tools displayed after the TOOLS button
is pressed during Player playback.
―User-selected main frame: Main frame settings can be configured in step 2 when creating a
server schedule.
Template files and LFD(.lfd) files
Restrictions
•Ensure a distributed folder (content / schedules) exists in Internal / USB memory.
Playback restrictions
•A maximum of two video (Videos) files can be played.
•More than one Flash file cannot be played.
•For Office files (PPT and Word files) and PDF files, only one file type is supported at a time.
•Multiple videos (Videos) cannot be played on a single display of a video wall simultaneously.
Sound output restrictions
•More than one sound output cannot be used.
•Playback priority: Flash file > network BGM > local BGM > video file in the main frame selected
by the user
Contents
File Extension Container Video Codec Resolution Frame rate
(fps)
Bit rate
(Mbps)
Audio Codec
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.mov
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.v
*.vob
*.svi
*.m2ts
*.mts
*.divx
AVI
MKV
ASF
MP4
3GP
VRO
VOB
PS
TS
DivX 3.11 / 4.x / 5.x / 6.x 1920 x 1080 6~30 30
AC3
LPCM
AAC
HE-AAC
WMA
DD+
MPEG(MP3)
DTS Core
G.711(ALaw, μ-Law)
MPEG4 SP / ASP
H.264 BP / MP / HP
Motion JPEG
Window Media Video v9
MPEG2
MPEG1
VP6 640 x 480 4
Video Audio Image
•3D video is not supported.
•Content with a resolution larger than the
resolution specified in the table above is not
supported.
•Video content with a Bit rate or Frame rate larger
than the rate specified in the table above can
cause choppy video during playback.
•Video content will not play, or not play correctly,
if there is an error in the content or the container.
•Some USB/digital camera devices may not be
compatible with the player.
•Supports up to H.264, Level 4.1
•H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and
AVCHD are not supported.
•For all Video codecs except MVC, VP8, VP6:
-Below 1280 x 720: 60 frame max
-Above 1280 x 720: 30 frame max
•GMC 2 or higher is not supported.
•Supports only BD MVC Spec.
•Certain codecs (MVC, VP8 and MJPEG) will not
be supported in the following situations: playing
different file types successively, playing LFD files,
or playing files in portrait mode.
•Audio content with a Bit rate or Frame rate
larger than the rate specified in the table above
can cause choppy audio during playback.
•Video content will not play, or not play
correctly, if there is an error in the content or
the container.
•Some USB/digital camera devices may not be
compatible with the player.
•Supports up to WMA 10 Pro 5.1 channel. WMA
lossless audio is not supported.
•QCELP, AMR NB/WB are not supported.
•Compatible image file format : Jpeg
•Supported maximum resolution : 15,360 x 8,640
•Supported image effects : 9 effects
(Fade1, Fade2, Blind, Spiral, Checker, Linear,
Stairs, Wipe, Random)
Flash Power Point PDF
•Compatible with Flash 10.1
•Flash Animation
-Compatible file format : SWF
•Recommended resolution : 960 x 540
-Caution
Performance comparable to Flash Player
on a Windows operating system cannot be
guaranteed
Optimization is needed during content
creation
•Flash Video
-Compatible file format : FLV
-Video
Codec : H.264 BP
Resolution : 1920 x 1080
-Audio
Codec : H.264 BP
-Caution
F4V file format is not supported
Screen Video is not supported
•Compatible document file formats
-Extension : ppt, pptx
-Version : Office 97 ~ Office 2007
•Functions not supported
-Animation effect
-3D shapes (which will be displayed in 2D)
-Header and footer (some subitems are not
supported)
-Word Art
-Align
A group alignment error may occur
-Office 2007
SmartArt is not fully supported. 97 out of
115 subitems are supported.
-Object insertion
-Half-width characters
-Letter spacing
-Charts
-Vertical text
some subitems are not supported
-Slide notes and handout
•Compatible document file formats
-Extension : pdf
•Functions not supported
-Content less than 1 pixel not supported
because of performance degradation issue.
-Masked Image, Tiled Image content not
supported.
-Content with Rotated Text, not supported.
-3D Shadow Effects not supported.
-Some characters not supported
(Special characters may be corrupted)
WORD Template les LFD
•Compatible document file formats
-Extension : .doc, .docx
-Version : Office 97 ~ Office 2007
•Functions not supported
-Page background effect
-Some paragraph styles
-Word Art
-Align
A group alignment error may occur
-3D shapes (which will be displayed in 2D)
-Office 2007
SmartArt is not fully supported. 97 out of
115 subitems are supported.
-Charts
-Half-width characters
-Letter spacing
-Vertical text
some subitems are not supported
-Slide notes and handout
•Creation/editing/playback are only available in
Template.
•Supported in Network Channel and Local
Channel
•Compatible document file formats
-Extension : .lfd
File Formats Compatible with Video Wall
―Refer to the <MagicInfo Server user's manual> for further details.
Video Image
•3D video is not supported.
•Content with a resolution larger than the resolution specified in the table
above is not supported.
•Video content with a Bit rate or Frame rate larger than the rate specified in
the table above can cause choppy video during playback.
•Video content will not play, or not play correctly, if there is an error in the
content or the container.
•Some USB/digital camera devices may not be compatible with the player.
•Supports up to H.264, Level 4.1
•H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
•For all Video codecs except MVC, VP8, VP6:
-Below 1280 x 720: 60 frame max
-Above 1280 x 720: 30 frame max
•GMC 2 or higher is not supported.
•Supports only BD MVC Spec.
•Some codecs may not be supported in portrait playback mode.
•Compatible image file format : Jpeg, png, bmp
•Supported maximum resolution : 15360 x 8640
―A higher resolution image may take longer to display on the screen.
Restrictions
•Only one video (Videos) file can be played per client.
―Different content files can be played on the displays of a video wall.
Two video (Videos) files cannot be played on a single display of a video wall.
Available Available Not available
Schedule
HOME → Schedule → ENTER E
00:00
00:30
01:00
01:30
02:00
02:30
03:00
03:30
04:00
04:30
05:00
05:30
06:00
Add content to create
a programme on the
channel.
Configure the display
duration to set how long
each item of content will
play for.
Set a start time and
a stop time for the
programme.
Playing Time [CH1]Channel 1 [CH2]Channel 2 [CH3]Channel 3
OptionsType : Local Device : Internal
Schedule your content on a local channel or edit existing channels.
Schedule
+ Add Programme Schedule your content on
CH 2.
Schedule your content on
CH 3.
Available features in the Schedule page
The Schedule page provides the following features.
•Type
-Local: Add or edit schedules.
-Network: View the network schedule configured on the server.
•Device
-Display the name of a connected storage device.
―This option only activates if Type is set to Local in Device.
•Options
Menu items in the Schedule page
Option Name Operations
Send
Send configured schedules to another storage device. This is similar to the "copy" feature
on PCs.
Delete
Delete schedules.
Settings
The default content plays on a channel that does not contain programme information.
Configuring channel schedules
Play media content such as videos, photos and music at a desired time.
1
Select a channel to configure.
2
Select video, music and photo content you want to apply to the channel schedule.
3
Set the time to play the schedule. (Start Time ~ Stop Time)
4
Change the channel schedule name, and then select a destination folder to save to.
5
Press the Save button.
―Only applicable when Type is set to Local.
Editing a channel schedule.
Change settings for a configured channel schedule such as content, the duration and the schedule name.
1
Select a channel to edit.
2
Select video, photo or music content to edit in the channel schedule.
-Deleting content: Place the cursor over the desired content and then press the E button to delete it.
-Move to the far right end of the content list. Click the + button to add content or change the playback order of content items.
3
Set the time to play the schedule. (Start Time ~ Stop Time)
4
Change the channel schedule name, and then select a destination folder to save to.
5
Press the Save button.
―Only applicable when Type is set to Local.
Template
HOME → Template → ENTER E
Market : All Orientation : Landscape
item(s)
Select a template to customise.
My Templates
Template
-The displayed image may differ depending on the model.
-The Template function is disabled if Video Wall is set to On.
Available features in the Template page
Create unique content using templates. It is easy to create content. Simply change images and text in a
template.
Sort the template list using the following criteria.
•Market
•Orientation
-Landscape: Select this mode when using the product in landscape orientation.
-Portrait: Select this mode when using the product in portrait orientation.
1
Select a template from the provided sample templates.
New town
interior design
Sustainble evolution unfolods tomorrw’s design
Background Screen Background Music Off
Select in the editable zone to add content or edit the existing text.
Template
Preview
Save
Cancel
2
Organize a template by inserting text, video, photo, or PDF files as desired.
Entering text
New town
interior design
Sustainble evolution unfolods tomorrw’s design
Background Screen Background Music Off
Select in the editable zone to add content or edit the existing text.
Template
Preview
Save
Cancel Edit Text
Font options
Edit Text
Select the Edit Text window to enter text.
Font options
Font Size: Set the font size for messages.
―Go to a message and use the VOL key to adjust the font size.
Font Colour: Specify the text colour for the message.
Background Colour: Specify the background colour for the message.
Background opacity: Specify the background transparency for the message.
Alignment: Select a message alignment mode.
Scroll: Specify the scroll direction/speed for the message.
Hide Element: Display or hide a message.
―Selecting Hide does not reset the message settings.
Reset: Reset all settings in Font options to default settings.
Inserting content such as videos, photos and PDF files
picture1.jpg
Edit
Default content duration
Hide Element Show Aspect Ratio
Mute
Item(s) selected
Select item to delete
Select in the editable zone to add content or edit the existing text.
Template
Done Cancel
Configuring the background image/background music
..
Background Screen Device : All
Done Cancel
Select in the editable zone to add content or edit the existing text.
Template
Preview
New town
interior design
Sustainble evolution unfolods tomorrw’s design
Template preview is running. It will stop
after 20 seconds.
1
Preview the created template using the Preview feature.
2
To save the template, press the Save button.
3
Configure Template Name and Storage.
Save
Duration
Template Name
Storage
23:59:59
Template01
Internal
Save Cancel
4
Press the Save button to finish creating the content.
Clone Product
HOME → Clone Product → ENTER E
Clone Product
-The displayed image may differ depending on the model.
Export the product settings to a USB device or load the settings via a USB device.
This option is useful when assigning the same settings to several products.
When USB does not contain a duplicate le
1
Connect the USB device to a USB port. Run the Clone Product function.
2
The No cloning file found on the USB device. Copy system settings from this product to the USB storage device?
message appears.
When USB contains a duplicate le
1
Connect the USB device to a USB port. Run the Clone Product function.
2
The Cloning file found. Please select an option. message appears.
Run the Clone From USB or Clone to USB function.
-Clone From USB: Apply the USB device settings to the product.
-Clone to USB: Copy the product settings to the USB device.
―After configuration is complete, the product is rebooted automatically.
ID Settings
HOME → ID Settings → ENTER E
ID Settings
-The displayed image may differ depending on the model.
Assign an ID to a set.
Press u/d to select a number, and press E.
Device ID
Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224)
―Enter the number you want using the number buttons on the remote control.
PC Connection Cable
Select a method to connect to MDC to receive the MDC signal.
•RS232C cable
Communicate with MDC via the RS232C-stereo cable.
•RJ45(LAN) cable
Communicate with MDC via the RJ45 cable.
Device ID Auto Set
This feature automatically allots an ID number to a device connected via an RS232C cable.
Video Wall
HOME → Video Wall → ENTER E
Video Wall
-The displayed image may differ depending on the model.
Customize the layout of multiple displays that are connected to form a video wall.
In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays.
To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the MagicInfo
function.
Apply to
•Current Source (screen output from a device connected to Source): Configure videowall features for the screen output
from an external device connected to the product.
•MagicInfo Player S: Configure videowall features for content saved in the product or content saved on a USB memory or
SD card.
Restrictions
―Playback may be initially choppy if video files of different resolutions play successively (i.e., 1280x720 content plays after
1920x1080 content) or an image file and a video file play one after the other.
Video Image
•Supported resolution
-1920 x 1080 @ 24p/30p
-1280 x 720 @ 24p/30p/60p
•HEVC and 3D images are not supported.
•Compatible image file format : Jpeg, png, bmp
•Supported maximum resolution
-jpeg: 15360 x 8640
-png: 4096 x 4096
-bmp: 4096 x 4096
Video Wall
You can activate or deactivate Video Wall.
To organize a video wall, select On.
•Off / On
Horizontal x Vertical
This feature automatically splits a videowall display based on a videowall matrix configuration.
Enter the videowall matrix.
The videowall display is split based on the configured matrix. The number of vertical or horizontal display devices can be set within the range 1 and 15.
―A videowall display can be split into a maximum of 225 screens.
―The Horizontal x Vertical option is only enabled when Video Wall is set to On.
Screen Position
To rearrange split screens, adjust the number for each product in the matrix using the Screen Position feature.
Selecting Screen Position will display the videowall matrix with the numbers assigned to the products that form the videowall.
To rearrange products, use the direction buttons on the remote control to move a product to another desired number. Press the E button.
•All Displays: Assign screen positions to All displays. Then, you don't need to set up video wall for individual displays.
•Current Displays: Only Assign screen position for this first display.
―Screen Position can be set up with a maximum of 15x15 split screens (225 devices). If connected using DP Loopout mode, the maximum number of devices changes
to 100.
―The Screen Position option is only enabled when Video Wall is set to On.
―To use the function, make sure Horizontal x Vertical is configured.
Format
Select how to display images on the videowall display.
•Full: Display images in full screen with no margin.
•Natural: Display images in the original aspect ratio without enlarging or reducing the size.
―The Format option is only enabled when Video Wall is set to On.
Network Status
HOME → Network Status → ENTER E
Network Status
-The displayed image may differ depending on the model.
Check the current network and Internet connection.
Picture Mode
HOME → Picture Mode → ENTER E
Picture Mode
-The displayed image may differ depending on the model.
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
•Shops & Malls
Suitable for shopping malls.
-Select either Videos/Images or Text depending on the picture mode.
•Offices & Schools
Suitable for offices and schools.
-Select either Videos/Images or Text depending on the picture mode.
•Terminals & Stations
Suitable for bus terminals and train stations.
-Select either Videos/Images or Text depending on the picture mode.
•Video Wall
Suitable for environments where videowall display are used.
-Select either Videos/Images or Text depending on the picture mode.
•Calibration
In this mode, the brightness, colour, gamma and uniformity settings customized using the colour calibration programme
Advanced Colour Management are applied.
-To apply the Calibration mode properly, make sure you configure the picture quality settings, such as brightness,
colour, gamma and uniformity, using the colour calibration programme Advanced Colour Management.
-For more information on the Advanced Colour Management programme, contact the dealer you purchased the
product from.
On/O Timer
HOME → On/Off Timer → ENTER E
On/Off Timer
-The displayed image may differ depending on the model.
―You must set the clock before you can use On/Off Timer.
On Timer
Set On Timer so that your product turns on automatically at a time and on a day of your choosing.
The power is turned on with the specified volume or input source.
On Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the current time first.
(On Timer 1 ~ On Timer 7)
•Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose the days you want On Timer to turn on your product.
-The check mark indicates days you’ve selected.
•Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use the left
and right arrow buttons to change entry fields.
•Volume: Set the desired volume level. Use the left and right arrow buttons to change the volume level.
•Source: Select the input source of your choice.
•Contents (when the Source is set to Internal/USB): From the USB device or internal memory device, select a folder
containing content you want to play when the product turns on. Content can include music, photo or video files.
―This function is available only when a USB device is connected.
―If there is no music file on the USB device or you don’t select a folder containing a music file, the Timer function does not
operate correctly.
―If there is only one photo file in the USB, the Slide Show will not play.
―If a folder name is too long, the folder cannot be selected.
―Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders
assigned to each USB have different names.
―We recommend that you use a USB memory stick and a multi card reader when using On Timer.
―The On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by some
manufacturers because the product can take too long to recognize these devices.
O Timer
Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer 1 ~ Off Timer 7)
•Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose the days you want Off Timer to turn off your product.
-The check mark indicates days you’ve selected.
•Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use the left
and right arrow buttons to change entry fields.
Holiday Management
Timer will be disabled during a period specified as a holiday.
•Add Holiday: Specify the period you want to add as a holiday.
Select the start and end dates of the holiday you want to add using the u/d buttons, and click the Save button.
The period will be added to the list of holidays.
-Start: Set the start date of the holiday.
-End: Set the end date of the holiday.
―Delete: Delete selected items from the list of holidays.
―Edit: Select a holiday item and then change the date.
•Set Applied Timer: Set the On Timer and Off Timer to not activate on public holidays.
-Press E to select the On Timer and Off Timer settings you do not want to activate.
-The selected On Timer and Off Timer will not activate.
Ticker
HOME → Ticker → ENTER E
Ticker
-The displayed image may differ depending on the model.
Input text while a video or image is displayed and display the text on the screen.
•Off / On
•Message: Enter a message to display on the screen.
•Time: Set the Start Time and End Time to display a Message.
•Font options: Specify the text font and colour for the message.
•Position: Select an orientation to display a Message.
•Scroll: Specify the scroll Direction and Speed for the message.
•Preview: Preview configured caption settings.
More settings
HOME → More settings → ENTER E
More settings
-The displayed image may differ depending on the model.
The picture settings menu appears.
URL Launcher
HOME → URL Launcher → ENTER E
URL Launcher
12:00
Change URL
pm
January 1 2014
Clone Product
Picture Mode
ID Settings
On/Off Timer
Video Wall
Ticker
Network Status
More settings
-The displayed image may differ depending on the model.
For details on how to use the URL Launcher feature, contact the dealer the product was purchased from.
―To use the URL Launcher feature, set Play via to URL Launcher in System.
Screen Adjustment
Configure the Picture settings (Backlight, Colour Tone, etc.).
The layout of the Picture menu options may vary depending on the product.
Picture Mode
MENU m → Picture → Picture Mode → ENTER E
·
·
·
·
·
·
Picture
Picture Mode
Backlight
Contrast
Brightness
Sharpness
Colour
Tint (G/R)
Terminals & Stations
100
70
45
65
50
G50 R50
-The displayed image may differ depending on the model.
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
•Shops & Malls
Suitable for shopping malls.
-Select either Videos/Images or Text depending on the picture mode.
•Offices & Schools
Suitable for offices and schools.
-Select either Videos/Images or Text depending on the picture mode.
•Terminals & Stations
Suitable for bus terminals and train stations.
-Select either Videos/Images or Text depending on the picture mode.
•Video Wall
Suitable for environments where videowall display are used.
-Select either Videos/Images or Text depending on the picture mode.
•Calibration
In this mode, the brightness, colour, gamma and uniformity settings customized using the colour calibration programme
Advanced Colour Management are applied.
-To apply the Calibration mode properly, make sure you configure the picture quality settings, such as brightness,
colour, gamma and uniformity, using the colour calibration programme Advanced Colour Management.
-For more information on the Advanced Colour Management programme, contact the dealer you purchased the
product from.
Backlight / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
MENU m → Picture → ENTER E
·
·
·
·
·
·
Picture
Picture Mode
Backlight
Contrast
Brightness
Sharpness
Colour
Tint (G/R)
Terminals & Stations
100
70
45
65
50
G50 R50
-The displayed image may differ depending on the model.
Your product has several options for adjusting picture quality.
Picture Mode Picture Mode settings Adjustable options
Shops & Malls, Offices & Schools,
Terminals & Stations, Video Wall
Videos/Images Backlight / Contrast / Brightness / Sharpness /
Colour / Tint (G/R)
Text Backlight / Contrast / Brightness / Sharpness
Calibration Backlight
―When you make changes to Backlight, Contrast, Brightness, Sharpness, Colour or Tint (G/R), the OSD will be adjusted
accordingly.
―You can adjust and store settings for each external device you have connected to an input on the product.
―Lowering picture brightness reduces power consumption.
Colour Temperature
MENU m → Picture → Colour Temperature → ENTER E
Picture
Colour Temperature 10000K
-The displayed image may differ depending on the model.
Adjust the colour temperature (Red / Green / Blue). (Range: 2800K–16000K)
―This option is available when Colour Tone is set to Off.
―If Picture Mode is set to Calibration, Colour Temperature is disabled.
White Balance
MENU m → Picture → White Balance → ENTER E
Picture
White Balance
-The displayed image may differ depending on the model.
2 Point
Adjust the colour temperature for a more natural picture.
•R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness.
•R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.
•Reset: Suitable for environments where videowall display are used.
10 Point
Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.
•Off / On
Level: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Suitable for environments where videowall display are used.
―Some external devices may not support this function.
―Enabled when Picture Mode is set to Offices & Schools (Videos/Images).
Gamma
MENU m → Picture → Gamma → ENTER E
Picture
Gamma 0
-The displayed image may differ depending on the model.
Adjust the primary colour intensity.
―If Picture Mode is set to Calibration, Gamma is disabled.
Calibrated value
MENU m → Picture → Calibrated value → ENTER E
Picture
Calibrated value
-The displayed image may differ depending on the model.
Select whether to apply the brightness, colour, gamma and uniformity settings customized using the colour calibration
programme Advanced Colour Management to the Information and Advertisement modes.
•Don't apply / Apply
―For more information on the Advanced Colour Management programme, contact the dealer you purchased the product
from.
―If Picture Mode is set to Calibration, Calibrated value is disabled.
Advanced Settings
MENU m → Picture → Advanced Settings → ENTER E
Advanced Settings
Dynamic Contrast
Black Tone
Flesh Tone
RGB Only Mode
Colour Space
Motion Lighting
Medium
Darker
0
O
Native
O
-The displayed image may differ depending on the model.
Picture Mode Picture Mode settings Adjustable options
Shops & Malls, Offices & Schools,
Video Wall
Videos/Images Dynamic Contrast / Black Tone / Flesh Tone /
RGB Only Mode / Colour Space
Text Dynamic Contrast / Black Tone
Terminals & Stations Videos/Images Dynamic Contrast / Black Tone / Flesh Tone
/ RGB Only Mode / Colour Space / Motion
Lighting
Text Dynamic Contrast / Black Tone
―If Picture Mode is set to Calibration, Advanced Settings is disabled.
Advanced Settings
Dynamic Contrast
Black Tone
Flesh Tone
RGB Only Mode
Colour Space
Motion Lighting
Medium
Darker
0
O
Native
O
-The displayed image may differ depending on the model.
Dynamic Contrast
Adjust the screen contrast.
•Off / Low / Medium / High
Black Tone
Select the black level to adjust the screen depth.
•Off / Dark / Darker / Darkest
Flesh Tone
Emphasize pink Flesh Tone.
RGB Only Mode
Displays the Red, Green and Blue colour for making fine adjustments to the hue and saturation.
•Off / Red / Green / Blue
Colour Space
Adjusts the range and variety of colours (the colour space) available to create images.
•Auto / Native / Custom
―To adjust Colour, Red, Green, Blue and Reset, set Colour Space to Custom.
Motion Lighting
Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.
•Off / On
Picture Options
MENU m → Picture → Picture Options → ENTER E
Picture Options
Colour Tone
Digital Clean View
MPEG Noise Filter
HDMI Black Level
Film Mode
Auto Motion Plus
Dynamic Backlight
O
O
O
Normal
O
O
O
-The displayed image may differ depending on the model.
Picture Mode Picture Mode settings Adjustable options
Shops & Malls, Offices & Schools,
Terminals & Stations, Video Wall
Videos/Images Colour Tone / Digital Clean View / MPEG
Noise Filter / HDMI Black Level / Film Mode /
Dynamic Backlight
Text Colour Tone / HDMI Black Level / Dynamic
Backlight
Calibration HDMI Black Level / Dynamic Backlight
Picture Options
Colour Tone
Digital Clean View
MPEG Noise Filter
HDMI Black Level
Film Mode
Auto Motion Plus
Dynamic Backlight
O
O
O
Normal
O
O
O
-The displayed image may differ depending on the model.
Colour Tone
If the input source is PC, DVI or HDMI1, HDMI2 (PC connection), DisplayPort.
•Off / Cool / Standard / Warm
If the input source is AV, Component or HDMI1, HDMI2.
•Off / Cool / Standard / Warm1 / Warm2
―If Picture Mode is set to Calibration, Colour Tone is disabled.
―Settings can be adjusted and stored for each external device connected to an input on the product.
Digital Clean View
If the broadcast signal received by your product is weak, you can activate the Digital Clean View feature to reduce any static
and ghosting that may appear on the screen.
•Off / Low / Medium / High / Auto
―Received signal intensity is the strongest when the bar is green.
―When the signal is weak, try all the options until the the product displays the best picture.
MPEG Noise Filter
Reduces MPEG noise to provide improved picture quality.
•Off / Low / Medium / High / Auto
HDMI Black Level
Selects the black level on the screen to adjust the screen depth.
•Low / Normal
―Available only in DisplayPort, HDMI1, HDMI2 and DVI mode (AV Timing : 480p, 576p, 720p, 1080i, 1080p).
Picture Options
Colour Tone
Digital Clean View
MPEG Noise Filter
HDMI Black Level
Film Mode
Auto Motion Plus
Dynamic Backlight
O
O
O
Normal
O
O
O
-The displayed image may differ depending on the model.
Film Mode
This mode is suitable to view movies.
Sets the product to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
•Off / Auto1 / Auto2
―Available in AV, Component (480i / 1080i).
Auto Motion Plus
Removes blur and judder from scenes with larger amounts of rapid movement to provide a clearer picture.
The menu names may vary depending on the country.
Off : Switches Auto Motion Plus off.
Clear : Sets Auto Motion Plus to Clear (suitable for viewing moving images clearly) mode.
Standard : Sets Auto Motion Plus to Standard mode.
Smooth : Sets Auto Motion Plus to Smooth (suitable for viewing moving images naturally) mode.
Custom : Use to reduce the afterimage and judder as much as you want.
•Blur Reduction : Use to reduce the afterimage as much as you want.
-This is only supported if the Auto Motion Plus is set to Custom.
•Judder Reduction : Use to reduce the judder as much as you want.
-This is only supported if the Auto Motion Plus is set to Custom.
•LED Clear Motion : Make moving images look more clear.
-This is only supported if the Auto Motion Plus is set to Custom.
•Reset: Restore Auto Motion Plus settings to default values.
-The colour on screen may vary with this option unintentionally.
-Disabled when PIP is set to On.
―This function may differ depending on the model.
Dynamic Backlight
Automatically adjust the backlight to provide the best possible screen contrast under the current conditions.
•Off / On
―The Dynamic Backlight is not available when the input source is set to PC, AV or Component while Video Wall is On.
Picture Size
MENU m → Picture → Picture Size → ENTER E
·
Picture Size
Picture Size 16:9
Position
Resolution O
-The displayed image may differ depending on the model.
choose size and aspect ratio picture displayed on screen.
Picture Size
―Different screen adjustment options are displayed depending on the current input source.
•16:9: Sets the picture to 16:9 wide mode.
•Zoom1: Use for moderate magnification. Cuts off the top and sides.
•Zoom2: Use for a stronger magnification.
•Smart View 1: Reduces the 16:9 picture by 50%.
―Smart View 1 is enabled only in HDMI1, HDMI2 mode.
•Smart View 2: Reduces the 16:9 picture by 25%.
―Smart View 2 is enabled only in HDMI1, HDMI2 mode.
•Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.
•4:3: Sets the picture to basic (4:3) mode.
―Do not set your product to 4:3 format for a long time.
The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen burn)
which is not covered by the warranty.
•Screen Fit: Displays the full image without any cut-off when HDMI1, HDMI2 (720p / 1080i / 1080p) or Component (1080i
/ 1080p) signals are inputted.
•Custom: Changes the resolution to suit the user's preferences.
•Original ratio: If the input source is PC, DVI, HDMI1, HDMI2 (PC connection), DisplayPort, the video will display in the
original aspect ratio.
―Available ports may differ depending on the model.
Position
·
Picture Size
Picture Size Custom
Position
Resolution O
-The displayed image may differ depending on the model.
Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit, Screen Fit or Custom.
―To use the Position function after selecting Zoom1, Zoom2, Wide Fit, Screen Fit or Custom, follow these steps.
1
Press the d button to select Position. Press the E button.
2
Press the u or d button to move the picture up or down.
3
Press the E button.
Zoom/Position
·
Picture Size
Picture Size Custom
Zoom/Position
Resolution O
-The displayed image may differ depending on the model.
Adjusts the picture zoom and position. This option is available when the input source is set to HDMI1, HDMI2 (1080i/1080p) or
AV, Component (1080i/1080p). Picture Size must be set to Custom for the option to be available.
1
Press the d button to select Zoom/Position. Press the E button.
2
Select the Zoom or Position. Press the E button.
3
Press the u/d/l/r button to move the picture.
4
Press the E button.
―If you want to reset the picture to its original position, select Reset in the Zoom/Position screen.
The picture will be set to its default position.
Resolution
If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize the picture
quality by selecting the same resolution for the product as the PC using this menu.
Available resolutions: Off / 1024x768 / 1280x768 / 1360x768 / 1366x768
Auto Adjustment
MENU m → Picture → Auto Adjustment → ENTER E
Picture
Auto Adjustment
-Available in PC mode only.
-The displayed image may differ depending on the model.
Adjust frequency values/positions and fine tune the settings automatically.
PC Screen Adjustment
MENU m → Picture → PC Screen Adjustment → ENTER E
Picture
PC Screen Adjustment
-Available in PC mode only.
-The displayed image may differ depending on the model.
•Coarse / Fine
Removes or reduces picture noise.
If the noise is not removed by Fine-tuning alone, use the Coarse function to adjust the frequency as best as possible
(Coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned with the centre
of screen.
•Position
To adjust the PC’s screen position if it is not centreed or does not fit the product screen.
Press the ▲ or ▼ button to adjust the Vertical Position. Press the ◄ or ► button to adjust the Horizontal Position.
•Image Reset
Resets the image to the default settings.
Picture O
MENU m → Picture → Picture Off → ENTER E
Picture
Picture O
-The displayed image may differ depending on the model.
Selecting Picture Off switches off the screen. The volume is not disabled.
To switch the screen on, press any button other than the volume button.
Reset Picture
MENU m → Picture → Reset Picture → ENTER E
Picture
Reset Picture
-The displayed image may differ depending on the model.
Resets your current picture mode to its default settings.
OnScreen Display
PIP
MENUm → OnScreen Display → PIP → ENTERE
OnScreen Display
PIP
Display Orientation
Screen Protection
Message Display
Menu Transparency
Menu Language
Reset OnScreen Display
Medium
English
-The displayed image may differ depending on the model.
-For PIP sound, refer to the Sound Select instructions.
-If you turn the product off while watching in the PIP mode, PIP mode will remain after power
Off/On.
-You may notice that the picture in the PIP screen becomes slightly unnatural when you use
the main screen to view a game or karaoke.
PIP Settings
The picture from the external video source will be in the main screen and the picture from the product will be in the PIP sub-
picture screen.
Main picture Sub picture
PC AV / Component
AV / Component PC / DisplayPort / HDMI1, HDMI2 / DVI / MagicInfo
HDMI1, HDMI2 / DVI / SBB AV / Component
MagicInfo PC / AV / Component / DisplayPort / HDMI1, HDMI2 / DVI
PIP
PIP
Source
Size
Position
Sound Select
O
PC
Õ
Ã
Main
OK
-The displayed image may differ depending on the model.
•PIP (Off / On): Activate or deactivate the PIP function.
•Source: You can select a source of the sub picture.
•Size ( , , , , , , ): Select a size for the subpicture.
•Position ( , , , , ): Select a position for the sub-picture.
―In double ( , , , ) mode, you cannot select Position.
•Sound Select (Main / Sub): You can choose to listen to the sound from the Main picture or the Sub picture.
Display Orientation
MENUm → OnScreen Display → Display Orientation → ENTERE
Display Orientation
Onscreen Menu Orientation
Source Content Orientation
Aspect Ratio
Landscape
Landscape
Full Screen
-The displayed image may differ depending on the model.
Onscreen Menu Orientation
Configure the menu screen.
•Landscape: Display the menu in landscape mode (default).
•Portrait: Display the menu in portrait mode on the right side of the product screen.
―Available only PC, DVI, AV, HDMI1, HDMI2, MagicInfo, DisplayPort mode.
Source Content Orientation
Rotate the product screen orientation.
•Landscape: Display the screen in landscape mode (default).
•Portrait: Display the screen in portrait mode.
―Available only PC, DVI, AV, HDMI1, HDMI2 (when a PC is connected), DisplayPort mode.
―Not available when PIP is set to On.
Aspect Ratio
Set the rotated screen to be either full screen or original.
•Full Screen: Display the rotated screen in full screen.
•Original: Display the rotated screen in the original aspect ratio.
―Available only when Source Content Orientation is set to Portrait.
―Available only PC, DVI, AV, HDMI1, HDMI2 (when a PC is connected), DisplayPort mode.
Screen Protection
MENUm → OnScreen Display → Screen Protection → ENTERE
Screen Protection
Auto Protection Time
Screen Burn Protection
O
-The displayed image may differ depending on the model.
Auto Protection Time
If the screen displays a still image for a certain period of time you define, the product activates the screen saver to prevent the
formation of burnt in ghost images on the screen.
•Off / 2 hours / 4 hours / 8 hours / 10 hours
Screen Burn Protection
To reduce the possibility of screen burn, this unit is equipped with Screen Burn Protection screen burn prevention
technology.
Screen Burn Protection moves the picture slightly on the screen.
The Screen Burn Protection Time setting allows you to programme the time between movements of the picture in minutes.
Pixel Shift
Minimize image retention by finely moving pixels horizontally or vertically.
•Pixel Shift (Off / On)
―Horizontal, Vertical and Time are enabled only when Pixel Shift is set to On.
•Horizontal: Sets how many pixels the screen moves horizontally.
•Vertical: Sets how many pixels the screen moves vertically.
•Time: Set the time interval for performing the horizontal or vertical movement, respectively.
Available Pixel Shift Settings and Optimum Settings.
Available Settings Optimum Settings
Horizontal (pixels) 0 ~ 4 4
Vertical (pixels) 0 ~ 4 4
Time (minute) 1 min ~ 4 min 4 min
―The Pixel Shift value may differ depending on the product size (inches) and mode.
―Displaying a still image or a 4:3 output for an extended period of time may cause image retention. This is not a defect in the
product.
―If Picture Size is set to Screen Fit, Pixel Shift is disabled.
Screen Burn Protection
Pixel Shift
Timer
Immediate display
Side Grey
O
O
-The displayed image may differ depending on the model.
Timer
You can set the timer for Screen Burn Protection.
The Screen Burn Protection feature stops automatically after a specified period of time.
Timer
Off
Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals(Period).
Interval: Display the image retention-preventive pattern set in Mode for a specified period of time (from Start Time to End
Time).
―Mode, Period, Time, Start Time and End Time are enabled only when Timer is set to Repeat or Interval.
•Mode: Select a screen protective pattern to display.
-Pixel: Pixels on the screen alternate black continuously.
-Rolling bar: A vertical bar moves left to right.
-Fading screen: The entire screen becomes brighter, then darker.
―The Rolling bar and Fading screen patterns appear only once regardless of the specified repeat period or time.
•Period: Specify the time interval to activate the Screen Burn Protection function.
―The option is enabled when Repeat is selected for Timer.
•Time: Specify the duration to keep the Screen Burn Protection function on.
―Enabled when Timer is set to Repeat and Mode is set to Pixel.
•Start Time: Set the start time to activate the screen protection function.
―The option is enabled when Interval is selected for Timer.
•End Time: Set the end time to deactivate the screen protection function.
―The option is enabled when Interval is selected for Timer.
Screen Burn Protection
Pixel Shift
Timer
Immediate display
Side Grey
O
O
-The displayed image may differ depending on the model.
Immediate display
Select the screen saver you want to display immediately.
•Off / Pixel / Rolling bar / Fading screen
Side Grey
When the screen is set to 4:3 aspect ratio, adjust the brightness of white margins on sides to protect the screen.
•Off / Light / Dark
Message Display
MENUm → OnScreen Display → Message Display → ENTERE
Message Display
Source Info
No Signal Message
MDC Message
On
On
On
-The displayed image may differ depending on the model.
Source Info
Select whether to display the source OSD when the input source changes.
•Off / On
No Signal Message
Select whether to display the no-signal OSD when no signal is detected.
•Off / On
MDC Message
Select whether to display the MDC OSD when the product is controlled by the MDC.
•Off / On
Menu Transparency
MENU m → OnScreen Display → Menu Transparency → ENTER E
OnScreen Display
Menu Transparency Medium
-The displayed image may differ depending on the model.
Adjust transparency of menu box.
•High / Medium / Low
Menu Language
MENU m → OnScreen Display → Menu Language → ENTER E
OnScreen Display
Menu Language English
-The displayed image may differ depending on the model.
Set the menu language.
―A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions
on your PC.
Reset OnScreen Display
MENU m → OnScreen Display → Reset OnScreen Display → ENTER E
OnScreen Display
Reset OnScreen Display
-The displayed image may differ depending on the model.
This option returns the current settings under OnScreen Display to the default factory settings.
Sound Adjustment
Configure the sound (Sound) settings for the product.
Sound Mode
MENU m → Sound → Sound Mode → ENTER E
Sound
Sound Mode
Sound Eect
HDMI Sound
Sound on Video Call
Speaker Settings
Auto Volume
Reset Sound
Standard
AV(HDMI)
Current Source
O
-The displayed image may differ depending on the model.
-Applicable to the OM**D-W model only.
You can select a sound mode to suit your personal preferences.
•Standard: Selects the normal sound mode.
•Music: Emphasizes music over voices.
•Movie: Provides the best sound for movies.
•Clear Voice: Emphasizes voices over other sounds.
•Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.
―If Speaker Settings is set to External, Sound Mode is disabled.
Sound Eect
MENUm → Sound → Sound Effect → ENTERE
Sound Eect
Virtual Surround
Dialog Clarity
Equaliser
O
O
-The displayed image may differ depending on the model.
-Applicable to the OM**D-W model only.
Configure your preferred sound effect for output sound.
―If Speaker Settings is set to External, Sound Effect is disabled.
―Available only when Sound Mode is set to Standard.
Virtual Surround
This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF(Head Related
Transfer Function) technology.
•Off / On
Dialog Clarity
This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be
heard more clearly.
•Off / On
Equaliser
Use Equaliser to customize sound setting for each speaker.
•Balance L/R: Adjusts the balance between the right and left speaker.
•100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.
•Reset: Resets the equalizer to its default settings.
HDMI Sound
MENU m → Sound → HDMI Sound → ENTER E
Sound
HDMI Sound AV(HDMI)
-The displayed image may differ depending on the model.
Select whether to hear from AV(HDMI) or PC(DVI).
•AV(HDMI) / PC(DVI)
Sound on Video Call
MENU m → Sound → Sound on Video Call → ENTER E
Sound
Sound on Video Call Current Source
-The displayed image may differ depending on the model.
-Applicable to the OM**D-W model only.
Select sound output to listen to during a video call.
•Current Source / Video Call
Speaker Settings
MENU m → Sound → Speaker Settings → ENTER E
Sound
Speaker Settings
-The displayed image may differ depending on the model.
Sound Output
•Internal(Applicable to the OM**D-W model only.) / External / Receiver
―If there is no video signal, both the products speakers and the external speakers will be mute.
Auto Volume
MENU m → Sound → Auto Volume → ENTER E
Sound
Auto Volume O
-The displayed image may differ depending on the model.
-Applicable to the OM**D-W model only.
The volume can vary depending on the channel.
Automatically equalize the volume level when switching to another channel.
•Off / Normal / Night
Normal equalizes the volume level on each channel, so that when you change channels, the volume level is the same.
Night equalizes and decrease the volume level on each channel, so each channel is quieter. Night is useful at night, when you
may want to keep the volume low.
―To use the volume control of a connected source device, set Auto Volume to Off. A change to the volume control of the
connected source device may not be applied if Auto Volume is set to Normal or Night.
Reset Sound
MENU m → Sound → Reset Sound → ENTER E
Sound
Reset Sound
-The displayed image may differ depending on the model.
The displayed image may differ depending on the model. Reset all sound settings to the factory defaults.
Network
Network Status
MENU m → Network → Network Status → ENTER E
You can check the current network and Internet status.
Network Status
Your wireless network and Internet connection are setup and ready to use.
You are connected to the Internet. If you have any problems using online services, please
contact your Internet service provider.
CloseRetryIP SettingsDisconnect
-The displayed image may differ depending on the model.
Network Settings
MENU m → Network → Network Settings → ENTER E
Configure network settings to use various smart hub features such as Internet search, content sharing
through a home network and feature updates.
Network Settings
Select your network type.
Network Type Wireless
Wireless network
Refresh WPS(PBC)
You can connect your
Device to the internet.
Please select which wireless
network to use.
-The displayed image may differ depending on the model.
Network Type
•Wireless / Wired
Network Settings (Wired)
Connecting to a Wired Network
There are three ways to attach your product to your LAN using cable.
•You can attach your product to your LAN by connecting the LAN port on the back of your product
to an external modem using a LAN cable.
See the diagram below.
RJ45
The Modem Port on the Wall External Modem
(ADSL / VDSL)
Modem Cable LAN Cable
LAN
•You can attach your product to your LAN by connecting the LAN port on the back of your product
to an IP Sharer which is connected to an external modem. Use LAN cable for the connection. See
the diagram below.
The Modem Port on the Wall External Modem
(ADSL / VDSL) IP Sharer
(having DHCP server)
LAN
Modem Cable LAN Cable LAN Cable
RJ45
•Depending on how your network is configured, you may be able to attach your product to your
LAN by connecting the LAN port on the back of your product directly to a network wall outlet
using a LAN cable.
See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in
your house.
The LAN Port on the Wall
LAN
LAN Cable
RJ45
If you have a Dynamic Network, you should use an ADSL modem or router that supports the Dynamic
Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the
IP address, subnet mask, gateway, and DNS values your product needs to access the Internet so you do
not have to enter them manually. Most home networks are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter
the IP address, subnet mask, gateway, and DNS values manually on your product Cable Setup Screen
when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values,
contact your Internet Service Provider (ISP).
If you have a Windows computer, you can also get these values through your computer.
―You can use ADSL modems that support DHCP if your network requires a Static IP address.
―ADSL modems that support DHCP also let you use Static IP addresses.
Set the network connection to use Internet services such as perform software upgrades.
Automatic Network Settings (Wired)
Connect to the network using a LAN cable.
Make sure a LAN cable is connected first.
How to set up automatically
1
Set Network Type to Wired from the Network Settings page.
2
Press the Connect button to start Network Settings.
-The Connect button is only enabled when the LAN cable is properly connected.
3
The network test screen appears and verifies the network connection.
When the connection has been verified, the “Wired network and Internet connection
completed.” message appears.
―If the connection process fails, check the LAN port connection.
―If the automatic process cannot find the network connection values or if you want to set the
connection manually, go to the next section, network setup.
Manual Network Settings (Wired)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server
address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
How to set up manually
1
Set Network Type to Wired from the Network Settings page.
2
Press the Connect button to start Network Settings.
-The Connect button is only enabled when the LAN cable is properly connected.
3
The network test screen appears and the verification process starts. Press Stop. The verification
process stops.
4
Select IP Settings on network connection screen. The IP Settings screen appears.
5
Select the field at the top, press E, and then set IP Settings to Enter manually. Repeat the entry
process for each field in the IP Address.
―Setting IP Settings to Enter manually automatically changes DNS Setting to Enter manually.
6
When done, select OK at the bottom of the page, and then press E. The network test screen
appears and the verification process starts.
7
When the connection has been verified, the “Wired network and Internet connection
completed.” message appears.
Network Setting (Wireless)
Connecting to a Wireless Network
The LAN Port on the Wall
Wireless IP sharer
(router having DHCP server)
LAN Cable
Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video
may not play smoothly.
―Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the
wireless IP sharer is currently being used by another device nearby, this will result in interference and
communication failure.
―Your product supports only the following wireless network security protocols.
If you select the Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to
WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless router, Samsung products will not support
a connection in compliance with new Wi-Fi certification specifications.
―If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC
(Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure
the SSID and WPA key in either mode.
―Connection Methods: You can setup the wireless network connection in three ways.
Auto Setup (Using the Auto Network Search function), Manual Setup, WPS(PBC)
Automatic Network Setup (Wireless)
Most wireless networks have an optional security system that requires devices that access the network
to transmit an encrypted security code called an Access or Security Key. The Security Key is based on
a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked
to enter when you set up security for your wireless network. If you use this method of setting up the
network connection, and have a Security Key for your wireless network, you will have to enter the Pass
Phrase during the the automatic or manual setup process.
How to set up automatically
1
Set Network Type to Wireless from the Network Settings page.
2
The Network function searches for available wireless networks. When done, it displays a list of the
available networks.
3
In the list of networks, press the ▲ or ▼ button to select a network, and then press the E button
twice.
―If the desired wireless router does not appear, select Refresh to search again.
―If the router cannot be found after retrying, select the Stop button.
The Add Network button appears.
Select Add Network to add a wireless router to connect to.
4
If the Enter password. screen appears, go to step 5. If you select a wireless router that does not
have security, go to step 7.
5
If the router has security, enter the Enter password. (Security key or PIN).
6
When done, use the right arrow button to move the cursor to Done, and then press E. The
network connection screen appears and the verification process starts.
―A connection with the router is established, but the Internet cannot be accessed.
7
When the connection has been verified, the “Your wireless network and Internet connection
are setup and ready to use.” message appears.
Manual Network Setup (Wireless)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server
address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
How to set up manually
1
Set Network Type to Wireless from the Network Settings page.
2
The Network function searches for available wireless networks. When done, it displays a list of the
available networks.
3
In the list of networks, press the u or d button to select a network, and then press the E button
twice.
―If the desired wireless router does not appear, select Refresh to search again.
―If the router cannot be found after retrying, select the Stop button.
The Add Network button appears.
Select Add Network to add a wireless router to connect to.
4
If the Enter password. screen appears, go to step 5. If you select a wireless router that does not
have security, go to step 7.
5
If the router has security, enter the Enter password. (Security key or PIN).
6
When done, use the right arrow button to move the cursor to Done, and then press E. The
network connection screen appears and the verification process starts.
7
Select Stop while network connections are being attempted. This will stop the connection.
8
Select IP Settings on network connection screen. The IP Settings screen appears.
9
Select the field at the top, press E, and then set IP Settings to Enter manually. Repeat the entry
process for each field in the IP Address.
―Setting IP Settings to Enter manually automatically changes DNS Setting to Enter manually.
10
When done, select OK at the bottom of the page, and then press E. The network test screen
appears and the verification process starts.
11
When the connection has been verified, the “Your wireless network and Internet connection
are setup and ready to use.” message appears.
WPS(PBC)
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps.
1
Set Network Type to Wireless from the Network Settings page.
2
Select WPS(PBC), press E, and then press E again.
3
Press the WPS(PBC) button on your router within 2 minutes. Your product automatically acquires
all the network setting values it needs and connects to your network.
4
The network connection screen appears, and network setup is done.
To use this function, your mobile device
should be supported by the Wi-Fi Direct.
Wi-Fi Direct
MENU m → Network → Wi-Fi Direct → ENTER E
Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices with your product directly without a router.
To connect your mobile device with your product using Wi-Fi Direct, follow these steps:
1
Go to Wi-Fi Direct screen. The product starts to search devices.
2
Turn on the Wi-Fi Direct function on your device. Select the desired Wi-Fi device.
•PBC (Push Button Configuration): Press the WPS(PBC) button on your Wi-Fi device within 2 minutes. Your product automatically acquires all the network setting
values it needs and connects to your network.
•PIN: Input the displayed PIN on your device.
―If you want to disconnect the device, select the connected Wi-Fi device, and then select Disconnected.
Multimedia Device Settings
MENU m → Network → Multimedia Device Settings → ENTER E
Allow other devices such as smart phones and tablets on your network, to share content with your product.
Screen Mirroring
MENU m → Network → Screen Mirroring → ENTER E
Connect a mobile device that supports the mirroring function to the product. This allows the screen and
sound from the mobile device to be outputted on the product. Mirroring refers to outputting the screen
and sound from a mobile device on a display device.
―To use Screen Mirroring, make sure the mobile device supports the mirroring function such as
AllShare Cast, WiDi (version 3.5 or higher) and Miracast. To check if the mirroring function is available,
visit the mobile device manufacturer website.
―Screen or sound output may be choppy if there is network congestion.
Screen Mirroring
Run the mirroring function from the mobile device. The mobile device automatically searches and
displays the product in a list.
―If the mobile device cannot connect to the product, turn them off and then on again, and try again.
Server Network Settings
MENU m → Network → Server Network Settings → ENTER E
Connect to server
To run Player connect to a network.
•If the SSL option is enabled, the server is configured to use https and data transfer is encrypted.
―Enter the server IP address and port number. Use 7001 as the port number. (If unable to connect to
the server using port number 7001, check with your server administrator to find the correct port
number and then change the port number.)
MagicInfo Mode
Select the appropriate MagicInfo Mode depending on the environment where you are using the
product.
•Lite / Premium
Server Access
Select a method to connect the server network.
•Allow / Deny
FTP Mode
Specify the FTP operating mode.
•Active / Passive
Device Name
MENU m → Network → Device Name → ENTER E
Select or enter a device name.
This name can be shown on network remote controls over the network.
System
Setup
MENU m → System → Setup → ENTER E
System
Setup
Time
Auto Source Switching
Power Control
Eco Solution
Fan and Temperature
-The displayed image may differ depending on the model.
Initial settings (System)
After powering on the product for the first time, configure basic settings such as the language, channel and time.
Press the button.
―Enter your 4 digit PIN number. The default PIN number is “0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
1
Selecting a language
Press the u or d button, and then press the E button. Specify the OSD menu language.
2
Display Orientation
Configure the menu page orientation.
-Landscape / Portrait
3
Auto Power Off
Set the time to automatically turn off the product when it is left idle for an extended period of time.
-Off (Recommended) / 4 hours / 6 hours / 8 hours
4
Network Settings
Set up your network connection. Press the E button to start. If you do not know your network set up information or
want to set to it later, select Skip. You can set up the network connection later using the Network menu.
5
Clock Set
Set the current date and time, and then select Next.
6
Play via
Select the appropriate player mode depending on the environment where you are using the product.
―The Play via setting step only appears when connected to the network.
7
Setup Complete
Congratulations! Setup is complete and you're ready to get started.
Time
MENU m → System → Time → ENTER E
Time
Clock Set
DST
Sleep Timer
Power On Delay
O
O
0 sec
-The displayed image may differ depending on the model.
You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a specified time
using the Timer function.
―Press the INFO button if you want to view the current time.
Clock Set
Select Clock Set. Select Date or Time, and then press E.
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow buttons to
move from one entry field to the next. Press E when done.
―You can set the Date and Time directly by pressing the number buttons on the remote control.
DST
Switches the DST (Daylight Saving Time) function on or off.
Off / On
•Start Date: Set the start date of Daylight Saving Time.
•End Date: Set the end date of Daylight Saving Time.
•Time Offset: Select the correct time offset your timezone.
Sleep Timer
Automatically shuts off the product after a preset period of time.
(Off / 30 min / 60 min / 90 min / 120 min / 150 min / 180 min)
―Use the up and down arrows to select a period of time, and then press E. To cancel Sleep Timer, select Off.
Power On Delay
When connecting multiple products, adjust the power-on time for each product to prevent power overload (within the range
0–50 seconds).
Turning on the display with Auto Source Switching On, and the previous video source selection is not active, the display will
automatically search the different video input sources for active video.
Auto Source Switching
When the Auto Source Switching is On, the display video source will automatically be searched for active video.
The Primary Source selection will be activated, if the current video source is not recognized.
Secondary Source selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform two searches for an active source,
each search checking the primary and then secondary source. If both searches fail, the display will return to the first video
source and display a message indicating that there is no signal.
When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence looking
for an active video source, returning back to the first video source in the sequence if no video is found.
Primary Source Recovery
Select whether to restore the selected primary input source when a primary input source is connected.
―The Primary Source Recovery function is disabled if Primary Source is set to All.
Primary Source
Specify Primary Source for the automatic input source.
Secondary Source
Specify Secondary Source for the automatic input source.
Auto Source Switching
MENU m → System → Auto Source Switching → ENTER E
끄기
Auto Source Switching
Auto Source Switching
Primary Source Recovery
Primary Source
Secondary Source
O
O
All
HDMI
-The displayed image may differ depending on the model.
Power Control
MENU m → System → Power Control → ENTER E
Power Control
Auto Power On
PC module power
Max. Power Saving
Standby Control
Power Button
Network Standby
O
On
Auto
Power on only
O
-The displayed image may differ depending on the model.
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
•Off / On
PC module power
The PC module can be turned on/off separately from the LFD.
Synced power-on
To turn on the PC module without turning on the LFD, select Off.
•Off / On
Synced power-off
To turn off the LFD without turning off the PC module, select Off.
•Off / On
Max. Power Saving
Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.
•Off / On
―Available only PC, DVI, HDMI1, HDMI2, DisplayPort mode.
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
•Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message No Signal will appear if no source device is connected.
•Off
The message No Signal will appear if no input signals are detected.
―The Standby Control option is only enabled when Source is set to PC, DVI, HDMI1, HDMI2 or DisplayPort.
―If No Signal is displayed although a source device is connected, check the cable connection.
―If No Signal Message is set to Off,the No Signal message does not appear.
If this is the case, set No Signal Message to On.
•On
Power-saving mode will activate if no input signals are detected.
Power Button
The power button can be set to either turn on the power or turn on/off the power.
•Power on only: Set the power button to turn on the power.
•Power on and off: Set the power button to turn on/off the power.
Network Standby
This feature keeps the network power on when the product turns off.
•Off / On
Power Control
Auto Power On
PC module power
Max. Power Saving
Standby Control
Power Button
Network Standby
O
On
Auto
Power on only
O
-The displayed image may differ depending on the model.
Eco Solution
MENU m → System → Eco Solution → ENTER E
Eco Solution
Brightness Limit
Energy Saving
Eco Sensor
Screen Lamp Schedule
No Signal Power O
Auto Power O
On
O
O
O
O
O
-The displayed image may differ depending on the model.
Brightness Limit
Limit the screen's maximum backlight level.
•Off: Off allows you to use the maximum brightness available.
•On: On prevents the use of maximum brightness and saves energy.
Energy Saving
Reduce the power consumption by adjusting the screen brightness.
•Off / Low / Medium / High
Eco Sensor
To enhance your power savings, the picture settings will automatically adapt to the light in the room.
•Off / On
―Adjusting the High setting under Picture while Eco Sensor is on will disable the Off.
Min. Backlight
When Eco Sensor is On, you can manually adjust the minimum screen brightness. Min. Backlight is the darkest backlight
mode. Make sure the Min. Backlight setting is lower than the Backlight setting.
―If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the surrounding
light intensity.
Eco Solution
Brightness Limit
Energy Saving
Eco Sensor
Screen Lamp Schedule
No Signal Power O
Auto Power O
On
O
O
O
O
O
-The displayed image may differ depending on the model.
Screen Lamp Schedule
Screen Lamp Schedule
Enable or disable the lamp schedule.
•Off / On
Schedule 1, Schedule 2
Time
The panel brightness will change to the brightness set in Time at a specified time.
Lamp
Adjust the panel brightness. A value closer to 100 makes the panel brighter.
•0 ~ 100
No Signal Power O
Save power by turning the device off when no signal is received from any source.
•Off / 15 min / 30 min / 60 min
―Disabled when an attached PC is in power saving mode.
―The product will automatically power off at a specified time. The time can be changed as required.
Auto Power O
The product will automatically turn off if you don’t press a button on the remote or touch a button on product front panel
within select hours to prevent overheating.
•Off / 4 hours / 6 hours / 8 hours
Protects the product by detecting the fan speed and internal temperature.
Fan Control
Selects auto or manual for the fan speed settings.
•Auto / Manual
Fan Speed Setting
Sets the fan speed within a range of 0 and 100.
―Enabled when Fan Control is set to Manual.
Temperature Control
This function detects the internal temperature of the product. You can specify the temperature range that is acceptable.
The default temperature is set to 77 C.
The recommended operating temperature for this product is 75 to 80 C (based on an ambient temperature of 40 C).
―The screen will become darker if the current temperature exceeds the specified temperature limit. If the temperature
continues to rise, the product will power off to prevent overheating.
Fan and Temperature
MENU m → System → Fan and Temperature → ENTER E
System
Fan and Temperature
-The displayed image may differ depending on the model.
Device Manager
MENU m → System → Device Manager → ENTER E
Device Manager
Keyboard Settings
Mouse Settings
Pointer Settings
-The displayed image may differ depending on the model.
Configure options for external input devices connected to the product.
Keyboard Settings
Connecting a keyboard to the product displays the Keyboard Settings menu.
Select Keyboard
Select a keyboard you want to use from the available connected keyboards.
―It is possible to use only one connected keyboard.
Keyboard Options
―Depending on the country.
Keyboard Language
Specify the keyboard input language.
Keyboard type
Specify the keyboard type.
Switch Input Language
Configure the key combination used to change the input language.
Mouse Settings
Connecting a mouse to the product displays the Mouse Settings menu.
Select Mouse
Configure mouse connection settings or options for connected mouse devices.
―Among connected mouse devices, only one mouse can be used.
Mouse Options
―Depending on the country.
Primary Button
Select a button on the mouse that will perform basic functions (click and enter).
•Left(default) / Right
Pointer Speed
Set the mouse pointer speed.
•Slow / Standard / Fast
Device Manager
Keyboard Settings
Mouse Settings
Pointer Settings
-The displayed image may differ depending on the model.
Device Manager
Keyboard Settings
Mouse Settings
Pointer Settings
-The displayed image may differ depending on the model.
Pointer Settings
Specify the pointer size, speed and shape.
Pointer Size
Specify the pointer size.
•Small / Medium / Large / Extra Large
Pointer Speed
Specify the pointer speed. A higher speed increases the pointer sensitivity.
•Slow / Standard / Fast
Pointer Image
Specify the pointer shape.
•Image 1 ~ Image 10
Play via
MENU m → System → Play via → ENTER E
System
Play via MagicInfo
-The displayed image may differ depending on the model.
Select the appropriate Play via mode depending on the environment where you are using the product.
The home screen may be different depending on the setting.
•MagicInfo / URL Launcher
Change PIN
MENU m → System → Change PIN → ENTER E
System
Change PIN
-The displayed image may differ depending on the model.
The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter it in Enter New PIN. Reenter the same 4 digits in Confirm New PIN.
When the Confirm screen disappears, press the Close button. The product has memorised your new PIN.
―Default password: 0 - 0 - 0 - 0
General
MENUm → System → General → ENTERE
General
Security
BD Wise
Anynet+ (HDMI-CEC)
HDMI Hot Plug
DivX® Video On Demand
Game Mode
On
On
On
O
-The displayed image may differ depending on the model.
Security
Safety Lock
It sets safe lock function.
•Off / On
All the menus and buttons of the product and remote control, except for the LOCK button on the remote control, will be
locked by the Safety Lock function.
To unlock the menus and buttons, press the LOCK button and then enter the password (default password: 0 - 0 - 0 - 0).
Button Lock
This menu can be used to lock the buttons on the product.
Only the remote control can control the product if Button Lock is set to On.
•Off / On
USB Auto Play Lock
Select whether to automatically play MagicInfo content saved on a connected USB device.
•On
Do not play MagicInfo content saved on the USB device automatically.
―Connecting a USB device containing MagicInfo content displays "USB Auto Play Lock : On" for five seconds.
•Off
Play MagicInfo content saved on the USB device automatically.
BD Wise
Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theatre products which support BD Wise. When BD
Wise is turned On, the picture mode is automatically changed to the optimal resolution.
•Off / On
―Available when you connect Samsung products that support BD Wise through an HDMI cable to the product.
―The BD Wise function is enabled only when a source device with the BD Wise function is connected.
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
―You can only control Anynet+ devices using the product remote control, not the buttons on the product.
―The product remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
―Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
―While in PIP mode, Anynet+ functions only when an AV device is connected as the primary display. It does not work if the
AV device is connected as a secondary display.
―Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the product.
Anynet+ Menu Description
View PC Changes Anynet+ mode to PC mode.
Device List Shows the Anynet+ device list.
(device_name) Menu Shows the menu of the connected device menus. E.g. if a DVD player is connected,
the disc menu of the DVD player will appear.
(device_name) Tools Shows the tools menu of the connected device. E.g. if a DVD player is connected, the
tools menu of the DVD player will appear.
―Depending on the device, this menu may not be available.
(device_name) Title Menu Shows the title menu of the disc in the connected device. E.g. If a DVD player is
connected, the title menu of the movie in the DVD player will appear.
―Depending on the device, this menu may not be available.
General
Security
BD Wise
Anynet+ (HDMI-CEC)
HDMI Hot Plug
DivX® Video On Demand
Game Mode
On
On
On
O
-The displayed image may differ depending on the model.
Auto Turn Off
Setting an Anynet+ Device to turn Off automatically when the product is turned off.
•No / Yes
―If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product powers off.
―May not be enabled depending on the device.
Search for Devices
Switching between Anynet+ Devices
1
Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press E.
2
Select Device List, and then press the E button.
If you cannot find a device you want, select Refresh to refresh the list.
3
Select a device, and then press the E button. You can switch to the selected device.
―The Device List menu appears only when you set Anynet+ (HDMI-CEC) to On in the System menu.
―Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while switching is in
progress.
―If you have selected an Anynet+ device by pressing the SOURCE button and then selecting its input source, you cannot use
the Anynet+ function.
―Make sure to switch to an Anynet+ device by using the Device List.
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
Auto Turn O
Search for Devices
O
No
-The displayed image may differ depending on the model.
Troubleshooting for Anynet+
Problem Possible Solution
Anynet+ does not work.
•Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
•Check if the Anynet+ device power cord is properly connected.
•Check the Anynet+ device’s Video/Audio/HDMI cable connections.
•Check whether Anynet+ (HDMI-CEC) is set to On in the System menu.
•Check whether the remote control is Anynet+ compatible.
•Anynet+ doesn’t work in certain situations. (initial setup)
•If you have removed and then reconnected the HDMI cable, please make sure to search devices again or turn your product
off and on again.
•Check if the Anynet+ function of the Anynet device is set on.
I want to start Anynet+.
•Check if the Anynet+ device is properly connected to the product and check if the Anynet+ (HDMI-CEC) is set to On in the
System menu.
•Press the TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+.
•Select View PC in the Anynet+ menu.
•Press the SOURCE button on the product remote control and select a non- Anynet+ device.
The message “Disconnecting
Anynet+ device ...” appears on
the screen.
•You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
•Use the remote control after the product has completed Anynet+ configuration or has finished switching to Anynet+.
The Anynet+ device does not play.
•You cannot use the play function when initial setup is in progress.
Problem Possible Solution
The connected device is not
displayed.
•Check whether or not the device supports Anynet+ functions.
•Check whether or not the HDMI cable is properly connected.
•Check whether Anynet+ (HDMI-CEC) is set to On in the System menu.
•Search Anynet+ devices again.
•Anynet+ requires an HDMI connection. Make sure the device is connected to your product with an HDMI cable.
•Some HDMI cables may not support Anynet+ functions.
•If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected, please
repeat the device scan.
HDMI Hot Plug
This feature is used to activate the time delay to turn on a DVI/HDMI source device.
•Off / On
DivX® Video On Demand
Shows the registration code authorized for the product.
If you connect to the DivXⓇ web site and register using that code, you can download the VOD registration file.
For more information about DivXⓇ VOD, visit “http://vod.divx.com”.
Game Mode
When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by
selecting game mode.
•Off / On
―Precautions and limitations for Game Mode
To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.
―Game Mode is not available when the input source is set to DVI or DisplayPort.
General
Security
BD Wise
Anynet+ (HDMI-CEC)
HDMI Hot Plug
DivX® Video On Demand
Game Mode
On
On
On
O
-The displayed image may differ depending on the model.
Reset System
MENU m → System → Reset System → ENTER E
System
Reset System
-The displayed image may differ depending on the model.
This option returns the current settings under system to the default factory settings.
Support
Software Update
MENU m → Support → Software Update → ENTER E
The Software Update menu lets you upgrade your product software to the latest version.
―Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after completing the software upgrade.
―When you upgrade software, all video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can
easily reset them after the upgrade.
Update now
Update the software to the latest version.
Auto update
This feature automatically updates the product when not in use.
•Off / On
Contact Samsung
MENU m → Support → Contact Samsung → ENTER E
View this information when your product does not work properly or when you want to upgrade the software.
You can find information regarding our call centres and how to download products and software.
―Contact Samsung and find the product Model Code and Software Version.
-Current Version: This is the software
version already installed in the product.
Go to Home to play a variety of content from a memory device or a connected network.
Player
Search or play channels or content saved on devices.
Schedule
Create content schedules in local channels or edit saved channels.
Template
To create content, select a template.
Clone Product
Export the product settings to a USB device or load the settings via a USB device.
This option is useful when assigning the same settings to several products.
ID Settings
Assign an ID to a set.
Press u/d to select a number, and press E.
Go to Home
Accessible using the HOME button on the remote control.
MENU m → Support → Go to Home → ENTER E
Player
Play a variety of content, such as
scheduled channels, templates or files.
Clone Product
Picture Mode
ID Settings
On/Off Timer
Video Wall
Ticker
Network Status
More settings
Schedule Template
-The displayed image may differ depending on the model.
-Refer to the "Home feature" chapter for details on sub-menu items.
Video Wall
Customize the layout of multiple displays that are connected to form a video wall.
In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays.
To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the MagicInfo function.
Network Status
Check the current network and Internet connection.
Picture Mode
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
On/O Timer
―You must set the clock before you can use On/Off Timer.
Set On Timer so that your product turns on automatically at a time and on a day of your choosing.
The power is turned on with the specified volume or input source.
Ticker
Input text while a video or image is displayed and display the text on the screen.
More settings
The picture settings menu appears.
Reset All
MENU m → Support → Reset All → ENTER E
Support
Reset All
-The displayed image may differ depending on the model.
This option returns all the current settings for a display to the default factory settings.
Playing photos, videos and music (Media Play)
Play photos, videos or music saved on a storage device.
Play a variety of content using the following methods.
•Using a USB device: Play media content such as videos, photos and music from a USB device.
•Connecting a storage device: Play media content saved on a storage device such as a smartphone, camera, PC or cloud service.
Read the following before using media play with a USB device
Caution
•Before connecting a USB device to the product, back up files to ensure your data is not damaged or lost.
Samsung Electronics is not liable for any damage or loss of data.
•Do not remove a USB device while it is loading.
•If a USB device is connected using a USB extension cable, the USB device may not be recognized or files saved on the device may not be able to be read.
•If the product does not recognize a connected USB device, the files on the USB device may be corrupted or may not be able to be played.
If this occurs, connect the USB device to the PC to format the device, then make sure the device is connected properly.
•USB HDD greater than 2TB is not supported.
Enjoy videos, photos, music files saved on a USB Mass Storage Class (MSC) device.
Compatible devices with media play
•Some USB digital cameras, smartphones and audio devices may not be compatible with the product.
•Media play is only compatible with USB MSC devices.
•MSC device refers to a Mass Storage Class Bulk-Only Transport device.
Examples of MSC devices include Thumb drives, Flash card readers and USB HDDs. (USB hubs are not supported.)
These MSC devices must be connected directly to a USB port on the product.
•If more than one Picture Transfer Protocol (PTP) device is connected, only one will work at a time.
•If multiple MSC devices are connected, some devices may not be recognized. USB devices that require high power (higher than 500mA or 5V) may not be supported.
•If an overheating warning message appears when a USB device is connected or used, the USB device may not be recognized or function properly.
•The screensaver activates if the product is left idle for a period of time specified in Auto Protection Time.
•Power-saving mode on some external hard disk drives may automatically deactivate after connecting to the product.
File system and formats
•Media play may not function properly with unlicenced multimedia files.
•Media Transfer Protocol (MTP) is not supported.
•Supported file systems include FAT16, FAT32 and NTFS (read only).
•Media play supports the sequential JPEG format.
It does not support the progressive JPEG format.
•Images with a higher resolution take longer to be displayed on the screen.
•The maximum JPEG resolution supported is 15360x8640 pixels.
•If a file is incompatible or corrupted, a message Not Supported File Format. appears.
•When sorting files in folder view mode, a maximum of 1000 files can be displayed in each folder.
•If a USB device contains 8000 files and folders or more, some files and folders may not open.
•DRM MP3 files downloaded from websites that charge a fee cannot be played.
Digital Rights Management (DRM) refers to a system for protecting the copyrights of data circulated via the Internet or other digital media by enabling secure
distribution and/or disabling illegal distribution of the data.
Using a USB device
Connecting a USB device
1
Turn on your product.
2
Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product.
3
The Player page automatically appears as soon as a USB device connects to the product.
―If only one USB device is connected, files saved on the USB device are displayed automatically.
―To view content saved on a USB device, connect the USB device to a USB port on the product.
Removing a USB device
Removing a USB device from Source
1
Press SOURCE on the remote control. Alternatively, go to Source using the OSD menu.
SOURCE → Source
2
Select USB from Source, and then press the TOOLS button on the remote control. The Options menu is displayed.
3
Select Disconnect USB Device and wait until the USB device is disconnected. The USB device is disconnected.
It is recommended to use a USB HDD that
has a power adapter.
It is recommended to remove a USB
device using the Disconnect USB Device
function.
Playing media content from a PC/mobile device
Approving a PC/mobile device connection
Play photos, videos or music saved on a PC or mobile device.
To play media content from a PC or mobile device on the product, the connection with the PC or mobile device must be approved.
―The media playback feature is available on any devices that support DLNA DMC. The DLNA DMC feature allows you to search media content and control content
playback from a product after connecting a PC or mobile device to the product.
1
Press SOURCE on the remote control. Alternatively, go to Source using the OSD menu.
SOURCE → Source
2
Select Network from Source. The Network Device menu appears.
3
Select Options from the screen, and then select Multimedia Device Settings. A list of devices connected to the product will appear.
4
Select a device and approve the device connection. Playback is only available on devices that are permitted to connect.
―Sending a media content playback request from a PC or mobile device displays a prompt asking if connection with the product is permitted. Conveniently connect
the devices using the prompt.
―For details on how to configure a network, refer to the section Network Settings.
―Ensure the product and PC are connected to the same network subnet.
All IP addresses are made up of four parts separated by dots.
(E.g. IP address 111.222.333.444) The product should have the same IP address as the PC, except for the fourth part of the address, if they are connected to the same
subnet. (E.g. 111.222.333.***)
When connected to a home network (DLNA)
Play content saved on a device connected to a home network.
―Playing media content using a non-Samsung DLNA server may result in a compatibility issue.
―Playback of some media content shared with a PC or mobile device may not be possible depending on the content encoding type or the content file format. Some
functions may not be available.
―Media content may not play properly if there is network congestion. If this is the case, use a USB device.
1
Press SOURCE on the remote control. Alternatively, go to Source using the OSD menu.
SOURCE → Source
2
Select Network from Source. The Network Device menu appears.
3
Select a device connected via the home network (DLNA). A list of files and folders shared with the selected device will appear.
4
Select media content to play from the list. Play the selected media content.
Features provided in the media content list page
SOURCE → Source → USB
The media content list page on a storage device provides the following features.
•Sort by
Rearrange the media content list under the selected file format in a desired view mode.
-This menu item is not available if Filter is set to All.
•Filter
Among Photos, Videos and Music content saved on a storage device, view content files under a desired file format only.
•Options
-This menu item is not available if Filter is set to All.
Menu items in the media content list page
Option Name Operations Photos Videos Music
Slide Show
Start a slideshow.
―This menu item is not available if Sort by is set to Folder.
c
Encoding
Select an encoding language if the title of media content appears corrupted. c
Rename Playlist
Rename a playlist. c
Delete Playlist
Delete a playlist. c
Add to Playlist
Add files to a playlist or create a new playlist. c
Play Selected
Select and play desired content from the media content list. ccc
Send
Send media content to another storage device. This is similar to the "copy" feature
on PCs.
ccc
Index
Select an index to conveniently locate media content if a storage device contains a
lot of media content.
―Provided indices include dates and alphanumeric characters.
―This menu item is not available if Sort by is set to Folder.
ccc
Available buttons and features during photo playback
Pressing the E or TOOLS button displays the following buttons. The RETURN button makes the buttons disappear.
•Pause / Play
Start or stop a slideshow. Using a slideshow, it is possible to play all photos in a folder.
•Previous / Next
View the previous or next photo.
•Settings
Option Name Operations
Slideshow Settings
Speed: Change the slideshow speed.
Effects: Apply transition effects between photos.
Rotate
Rotate photos.
Zoom
Zoom in on photos up to 4x.
Picture Mode
Change the Picture Mode.
Background Music
Play background music while viewing photos.
―Make sure a music file is saved on the same device.
―The mini player is displayed while background music (Background Music) is playing. Using the mini player, pause the music currently
playing or change to another music.
Sound Mode
Change the Sound Mode.
―This menu item is only available when background music (Background Music) is playing.
Select Speakers
Select a speaker that will output the background music (Background Music).
―This menu item is only available when background music (Background Music) is playing.
Send
Send open photos to another storage device. This is similar to the "copy" feature on PCs.
Information
View information about a file.
-Pressing the INFO button while a
device name is selected will display
information about the selected device.
-Pressing the INFO button while a file is
selected will display information about
the selected file.
Available buttons and features
during video playback
Pressing the E or TOOLS button displays the following buttons. The RETURN
button makes the buttons disappear.
•Pause / Play
Pause or play a video.
The following features are available in pause mode. Note that sound cannot
be heard in pause mode.
•Rewind / Fast Forward
Rewind or fast forward a video. Speed up playback up to 3x, if required. To
change the playback speed to the original speed, select ∂.
•Previous / Next
To play the previous video, select twice. Selecting once will play the
current video from the beginning.
To play the next video, select ‚.
•Settings
Option Name Operations
Select Scene
Thumbnails: Select a scene and play the video from the scene.
―Thumbnails is not available if 1) the thumbnail of the video is not extracted yet, 2) the video
contains audio only or 3) the video play time is shorter than 60 seconds.
Chapter Titles: Select and play another video in the same folder.
Time Bar: You can use the l and r buttons to scan through the file in 10-second intervals or
enter a specific time value to jump to that point in the video.
Repeat
Configure Repeat.
Off: Disable Repeat.
Repeat One: Play the current video repeatedly.
Repeat All: Play all videos in a folder repeatedly.
Rotate
Rotate an image.
Picture Size
Change the screen size (Picture Size). Supported screen sizes vary depending on the image.
Picture Mode
Change the Picture Mode.
Sound Mode
Change the Sound Mode.
Select Speakers
Select a speaker that will output sound from the product.
Audio Language
Play a video using a desired language. This feature only activates when a streaming file that
supports multiple audio formats is playing.
Information
View information about a file.
Available buttons and features during music playback
Pressing the E or TOOLS button displays the following buttons. The RETURN button makes the buttons disappear.
•Pause / Play
Pause or play music.
•Rewind / Fast Forward
Rewind or fast forward music. Speed up playback up to 3x, if required. To play the previous music file, select ∂ twice.
•Previous / Next
To play the previous music file, select twice. Selecting once will play the current music from the beginning.
To play the next music file, select ‚.
•Repeat
Configure Repeat mode. Repeat One plays the current music file repeatedly. Repeat All plays all files in a folder repeatedly.
•Shuffle
Enable or disable shuffle playback mode.
•Select Speakers
Select a speaker that will output sound from the product.
•Sound Mode
Change the Sound Mode.
Supported Subtitle and Media play le formats
Subtitle
External Internal
•MPEG-4 timed text (.ttxt)
•SAMI (.smi)
•SubRip (.srt)
•SubViewer (.sub)
•Micro DVD (.sub or .txt)
•SubStation Alpha (.ssa)
•Advanced SubStation Alpha (.ass)
•Powerdivx (.psb)
•Xsub
Container: AVI
•SubStation Alpha
Container: MKV
•Advanced SubStation Alpha
Container: MKV
•SubRip
Container: MKV
•MPEG-4 timed text
Container: MP4
Supported image resolutions
File Extension Type Resolution
*.jpg, *.jpeg JPEG 15360 x 8640
*.webp PNG 1920 x 1080
*.bmp BMP 1920 x 1080
*.mpo MPO 15360 x 8640
Supported music le formats
File Extension Type Codec Comments
*.mp3 MPEG MPEG1 Audio Layer 3
*.m4a, *.mpa, *.aac, *.3ga MPEG4 AAC
*.flac FLAC FLAC The Seek (jump) function is not supported.
Supports up to 2 channel
Supported Video Formats
•Video content will not play, or not play correctly, if there is an error in the content or the container.
•Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above.
•If the Index Table is in error, the Seek (Jump) function is not supported.
•You may experience file stuttering while playing a video through a network connection.
•The menu may take longer to appear if the video’s bit rate exceeds 10Mbps.
•Some USB/digital camera devices may not be compatible with the player.
Video Decoder Audio Decoder
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
For all Video codecs except MVC, VP8, VP6:
•Below 1280 x 720: 60 frame max
•Above 1280 x 720: 30 frame max
GMC 2 over is not supported.
Supports only BD MVC Spec.
Supports up to WMA 10 Pro 5.1 channel.
WMA lossless audio is not supported.
QCELP, AMR NB/WB are not supported.
If Vorbis is only in Webm container, supports up to 2 channel.
File
Extension
Container Video Codec Resolution Frame rate
(fps)
Bit rate
(Mbps)
Audio Codec
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.mov
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.v
*.vob
*.svi
*.m2ts
*.mts
*.divx
AVI
MKV
ASF
MP4
3GP
VRO
VOB
PS
TS
DivX 3.11 / 4.x / 5.x / 6.x 1920 x 1080 6~30 30
AC3
LPCM
ADMPCM
(IMA, MS)
AAC
HE-AAC
WMA
DD+
MPEG(MP3)
DTS Core
G.711(ALaw,μ-Law)
MPEG4 SP / ASP
H.264 BP / MP / HP
Motion JPEG
Window Media Video v9
MPEG2
MPEG1
VP6 640 x 480 4
MVC 1920 x 1080 24 / 25 / 30 40
*.webm
WebM VP8 6 ~ 30 8
Vorbis
Troubleshooting Guide
Requirements Before Contacting Samsung Customer Service Centre
Before calling Samsung Customer Service
Centre, test your product as follows. If
the problem persists, contact Samsung
Customer Service Centre.
Testing the Product
Check if your product is operating normally by using the product test function.
If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing.
1
Power off both the PC and product.
2
Disconnect all the cables from the product.
3
Power on the product.
4
If No Signal is displayed, the product is operating normally.
Checking the Resolution and Frequency
Not Optimum Mode will briefly be displayed if a mode that exceeds a supported resolution is selected
(refer to Supported Resolutions).
If the screen remains blank, check the PC
system, video controller and cable.
Check the followings.
Installation issue (PC mode)
The screen keeps switching on and o.
Check the cable connection between the product and PC, and ensure the connection is secure.
Blank spaces are found on all four sides of the screen when
an HDMI or HDMI-DVI cable is connected to the product and
PC.
The blank spaces found on the screen have nothing to do with the product.
Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust the
screen size in the HDMI or DVI settings for the graphics card.
If the graphics card settings menu does not have an option to adjust the screen size, update the
graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer for further details about how to adjust
the screen settings.)
PC is shown in Source when a PC is not connected. PC
is always shown in
Source
irrespective of whether or not a PC is connected.
Screen issue
The power LED is o. The screen will not switch on.
Make sure that the power cord is connected.
No Signal
is displayed on the screen.
Check that the product is connected correctly with a cable.
Check that the device connected to the product is powered on.
Not Optimum Mode
is displayed.
This message is displayed when a signal from the graphics card exceeds the product's maximum
resolution and frequency.
Refer to the Standard Signal Mode Table and set the maximum resolution and frequency according to
the product specifications.
The images on the screen look distorted.
Check the cable connection to the product.
Screen issue
The screen is not clear. The screen is blurry.
Adjust Coarse and Fine.
Remove any accessories (video extension cable, etc) and try again.
Set the resolution and frequency to the recommended level.
The screen appears unstable and shaky.
Check that the resolution and frequency of the PC and graphics card are set within a range compatible
with the product. Then, change the screen settings if required by referring to the Additional
Information on the product menu and the Standard Signal Mode Table.
There are shadows or ghost images left on the screen.
The screen is too bright. The screen is too dark.
Adjust Brightness and Contrast.
Screen colour is inconsistent.
Go to Picture and adjust the Colour Space settings.
White does not really look white.
Go to Picture and adjust the White Balance settings.
There is no image on the screen and the power LED blinks
every 0.5 to 1 second.
The product is in power-saving mode.
Press any key on the keyboard or move the mouse to return to the previous screen.
The product will turn o automatically.
Go to System and make sure Sleep Timer is set to Off.
If a PC is connected to the product, check the power status of the PC.
Make sure the power cable is connected properly to the product and power outlet.
If the signal from a connected device is not detected, the product automatically turns off after 10 to 15
minutes.
Picture quality of the product is dierent from the dealer
shop where it was purchased.
Use an HDMI cable to obtain high-definition (HD) picture quality.
Screen issue
The screen display does not look normal.
Encoded video content may cause the display to appear corrupted in scenes featuring fast moving
objects such as in a sports event or action video.
Low signal level or low picture quality may cause the display to appear corrupted. This does not mean
the product is defective.
A cell phone within a distance of one-meter radius may cause static on analogue and digital products.
The brightness and colour do not look normal.
Go to Picture and adjust the screen settings such as Picture Mode, Colour, Brightness and
Sharpness.
Go to System and adjust the Energy Saving settings.
Reset the screen settings to the default settings.
Broken lines are displayed on the edges of the screen.
If Picture Size is set to Screen Fit, change the setting to 16:9.
Lines (red, green or blue) are displayed on the screen.
These lines are displayed when there is a defect in DATA SOURCE DRIVER IC on the monitor. Contact a
Samsung Service Centre to resolve the issue.
The display looks unstable and then freezes.
The screen may freeze when a resolution other than the recommended resolution is used or if the
signal is not stable. To resolve the issue, change the PC resolution to the recommended resolution.
The screen cannot be displayed in full screen.
A scaled SD (4:3) content file can cause black bars on both sides of an HD channel screen.
A video with an aspect ratio different from the product can cause black bars at the top and bottom of
the screen.
Change the screen size setting to full screen on the product or source device.
Sound issue
There is no sound.
Check the connection of the audio cable or adjust the volume.
Check the volume.
Sound issue
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound
card or software programme.
Video is available but there is no sound.
―The OM**D-K model does not have internal speakers. To
enable audio, connect an external sound output device to
the AUDIO OUT port.
If an HDMI cable is connected, check the audio output settings on the PC.
Go to Sound and change Speaker Settings to Internal.
―Applicable to the OM**D-W model only.
If a source device is used
•Make sure the audio cable is properly connected to the audio input port on the product.
•Check the audio output settings for the source device.
(For example, if an HDMI cable is connected to the monitor, the audio setting for the cable box
may need to be changed to HDMI.)
If a DVI-HDMI cable is used, a separate audio cable is required.
If the product has a headphone port, make sure nothing is connected to it.
Reconnect the power cable to the device and then reboot the device.
There is static coming from the speakers.
Check the cable connection. Make sure a video cable is not connected to an audio input port.
Check the signal strength after connecting a cable.
Low signal level can cause corrupted sound.
There is audible sound when the volume is muted.
When Speaker Settings is set to External, the volume button and mute function are disabled.
Adjust the volume for the external speakers.
Audio settings for main speakers are separate from the internal speakers on the product.
Changing or muting the volume on the product does not affect an external amplifier(decoder).
Sound issue
Sound from the monitor does not change after Sound Mode
is changed.
―Applicable to the OM**D-W model only.
Audio settings for main speakers are separate from the internal speakers on the product.
Audio settings on a source device do not affect the internal speaker settings on the product.
There is an echo sound coming from the speakers.
―Applicable to the OM**D-W model only.
Different decoding speeds between the product speakers and external speakers can cause an echo.
In this case, set Speaker Settings to External.
Remote control issue
The remote control does not work.
Make sure that the batteries are correctly in place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs switched on in the vicinity.
Source device issue
A beeping sound is heard when my PC is booting.
If a beeping sound is heard when your PC is booting, have your PC serviced.
Other issue
The product smells like plastic.
The plastic smell is normal and disappears over time.
The monitor appears tilted.
Remove and then attach the stand again to the product.
Audio or video cuts out intermittently.
Check the cable connection and connect it again if required.
Using a very hard or thick cable may corrupt audio and video files.
Make sure cables are flexible enough to ensure durability. When mounting the product onto a wall, it
is recommended to use right-angle cables.
Small particles are found on the edges of the product.
The particles are part of the product design. The product is not defective.
The PIP menu is not available.
The menu is enabled or disabled depending on the Source mode.
When I try to change the PC resolution, a message "The
dened resolution is not supported." appears.
The message "The defined resolution is not supported." appears if the input source resolution
exceeds the maximum resolution of the display.
To resolve the issue, change the PC resolution to a resolution supported on the display.
There is no sound from the speakers in HDMI mode when a
DVI-HDMI cable is connected.
―The OM**D-K model does not have internal speakers. To
enable audio, connect an external sound output device to
the AUDIO OUT port.
DVI cables do not transmit sound data.
Make sure to connect the audio cable to the correct input jack to enable audio.
HDMI Black Level is not functioning properly on an HDMI
device with YCbCr output.
This function is available only when a source device, such as a DVD player and STB, is connected to the
product via an HDMI (RGB signal) cable.
Other issue
There is no sound in HDMI mode.
―The OM**D-K model does not have internal speakers. To
enable audio, connect an external sound output device to
the AUDIO OUT port.
Displayed picture colours may not look normal. Video or sound may not be available. This can occur if
a source device that only supports an older version of the HDMI standard is connected to the product.
If these issues occur, connect an audio cable along with the HDMI cable.
Some PC graphics cards may not automatically recognize HDMI signals that do not include sound. In
this case, manually select a sound input.
Sound input Screen mode
PC Auto PC settings
DVI PC Audio In (Stereo ports) PC settings
Other issue
The IR sensor is not functioning.
Make sure the sensor light turns on when a button is pressed on the remote control.
•If the sensor light does not turn on, turn the power switch off and then on again on the back of
the product.
(The power LED lights up red when the screen is switched off.)
If the sensor light still does not turn on after the power switch is turned off and then on again, an
internal jack may be disconnected.
Contact your nearest service centre to have the product serviced.
•If the sensor light that is on does not flash red when a button is pressed on the remote control,
the IR sensor may be defective.
Contact your nearest service centre to have the product serviced.
•This function is available only when a source device, such as a DVD player and STB, is connected
to the product via an HDMI (RGB signal) cable.
In power-saving mode, when the input source is DisplayPort,
PC display settings cannot be saved.
•Go to System → General and set Max. Power Saving to Off. Alternatively, configure the PC
display output settings again. Ensure the set is turned on.
When booting the PC with the input source set to
DisplayPort, the BIOS and booting screens do not appear.
•Boot the PC when the set is turned on or when the input source is not DisplayPort.
Q & A
Question Answer
How can I change the frequency?
Set the frequency on your graphics card.
•Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings →
Advanced → Monitor and adjust the frequency in Monitor Settings.
•Windows ME/2000: Go to Control Panel → Display → Settings → Advanced → Monitor and
adjust the frequency in Monitor Settings.
•Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize →
Display Settings → Advanced Settings → Monitor and adjust the frequency in
Monitor Settings.
•Windows 7: Go to Control Panel → Appearance and Personalization → Display →
Adjust resolution → Advanced Settings → Monitor and adjust the frequency in
Monitor Settings.
•Windows 8: Go to Settings → Control Panel → Appearance and Personalization →
Display → Adjust resolution → Advanced Settings → Monitor and adjust the frequency in
Monitor Settings.
How can I change the resolution?
•Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings and
adjust the resolution.
•Windows ME/2000: Go to Control Panel → Display → Settings and adjust the resolution.
•Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize →
Display Settings and adjust the resolution.
•Windows 7: Go to Control Panel → Appearance and Personalization → Display →
Adjust Resolution and adjust the resolution.
•Windows 8: Go to Settings → Control Panel → Appearance and Personalization →
Display → Adjust Resolution and adjust the resolution.
-Refer to the user manual for your PC or
graphics card for further instructions on
adjustment.
Question Answer
How do I set powersaving mode?
•Windows XP: Set power-saving mode in Control Panel → Appearance and Themes → Display
→ Screen Saver Settings or BIOS SETUP on the PC.
•Windows ME/2000: Set power-saving mode in Control Panel → Display →
Screen Saver Settings or BIOS SETUP on the PC.
•Windows Vista: Set power-saving mode in Control Panel → Appearance and Personalization
→ Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•Windows 7: Set power-saving mode in Control Panel → Appearance and Personalization →
Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•Windows 8: Set power-saving mode in Settings → Control Panel →
Appearance and Personalization → Personalize → Screen Saver Settings or BIOS SETUP on
the PC.
Specications
-Size
-Display area
H
V
-Dimensions (W x H x D)
W
D
H
General
Model Name OM46D-W OM55D-W OM75D-W
Panel Size
46 CLASS (45.9 inches / 116 cm) 55 CLASS (54.6 inches / 138 cm) 75 CLASS (74.5 inches / 189 cm)
Display area
1018.08 mm (H) x 572.67 mm (V)
40.1 inches (H) x 22.5 inches (V)
1209.6 mm (H) x 680.4 mm (V)
47.6 inches (H) x 26.8 inches (V)
1650.24 mm (H) x 928.26 mm (V)
65.0 inches (H) x 36.5 inches (V)
Dimensions (W x H x D)
1035.9 x 590.5 x 139 mm
40.8 x 23.2 x 5.5 inches
1227.4 x 698.2 x 139.5 mm
48.3 x 27.5 x 5.5 inches
1675.8 x 953.8 x 126.6 mm
66.0 x 37.6 x 5.0 inches
Weight
18.6 kg / 41.0 Ibs 24.0 kg / 52.9 Ibs 49.3 kg / 108.7 lbs
Model Name OM46D-K OM55D-K OM75D-K
Panel Size
46 CLASS (45.9 inches / 116 cm) 55 CLASS (54.6 inches / 138 cm) 75 CLASS (74.5 inches / 189 cm)
Display area
1018.08 mm (H) x 572.67 mm (V)
40.1 inches (H) x 22.5 inches (V)
1209.6 mm (H) x 680.4 mm (V)
47.6 inches (H) x 26.8 inches (V)
1650.24 mm (H) x 928.26 mm (V)
65.0 inches (H) x 36.5 inches (V)
Dimensions (W x H x D)
1035.9 x 620.5 x 142.9 mm
40.8 x 24.4 x 5.6 inches
1227.4 x 728.2 x 143.2 mm
48.3 x 28.7 x 5.6 inches
1675.8 x 983.8 x 124.2 mm
66.0 x 38.7 x 4.9 inches
Weight
17.9 kg / 39.5 Ibs 22.4 kg / 49.4 Ibs 44.0 kg / 97.0 lbs
Power Supply
AC 100 to 240 VAC (+/- 10%), 60 / 50Hz ± 3Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Environmental
considerations
Operating
Temperature : 32 F – 104 F (0 C – 40 C)
Humidity : 10 % – 80 %, non-condensing
Storage
Temperature : -4 F – 113 F (-20 C – 45 C)
Humidity : 5 % – 95 %, non-condensing
―Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor
settings.
Monitor installation takes place automatically. However, you can customize the installation settings if desired.
―Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does not affect
product performance.
―This device is a Class A digital apparatus.
[Recommendation] - EU Only
•Hereby, Samsung Electronics, declares that this Monitor is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
•The official Declaration of Conformity may be found at http://www.samsung.com/displaysolutions, go to Support >
Search Product Support and enter the model name.
•This equipment may be operated in all EU countries.
PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and changing the colour of the power LED if the product is not used
for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power-
savign mode only functions when the product is connected to a PC with a power-saving function.
PowerSaver Normal Operation Power saving mode
(SOG Signal : Not Support the
DPM Mode)
Power o Power o
(Power Switch)
Rating Typical Max
Power Consumption OM46D-W
OM46D-K
350 W 216 W 385 W Less than 0.5 W Less than 0.5 W 0 W
OM55D-W
OM55D-K
450 W 297 W 495 W Less than 0.5 W Less than 0.5 W 0 W
OM75D-W
OM75D-K
850 W 542 W 935 W Less than 0.5 W Less than 0.5 W 0 W
―The displayed power consumption level can vary in different operating conditions or when settings are changed.
―SOG(Sync On Green) is not supported.
―To reduce the power consumption to 0, turn off the switch at the back or disconnect the power cord. Disconnect the power cable if you will not be using the product
for an extended period of time (during vacation, etc.).
Preset Timing Modes
―This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than
the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product.
―Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product. If the LCD product does not support 85Hz, change the vertical
frequency to 60Hz using the CDT product before you exchange it with the LCD product.
Model Name OM46D-W / OM46D-K / OM55D-W / OM55D-K / OM75D-W / OM75D-K
Synchronization Horizontal Frequency
30 – 81 kHz
Vertical Frequency
48 – 75 Hz
Resolution Optimum resolution
1920 x 1080 @ 60 Hz
Maximum resolution
1920 x 1080 @ 60 Hz
The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal transmitted from the PC
does not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings according to the following table by
referring to the graphics card user manual.
Resolution Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400 31.469 70.087 28.322 -/+
MAC, 640 x 480 35.000 66.667 30.240 -/-
MAC, 832 x 624 49.726 74.551 57.284 -/-
MAC, 1152 x 870 68.681 75.062 100.000 -/-
VESA, 640 x 480 31.469 59.940 25.175 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
-Horizontal Frequency
The time required to scan a single line
from the left to the right side of the
screen is called a horizontal cycle. The
reciprocal number of a horizontal cycle
is called horizontal frequency. Horizontal
frequency is measured in kHz.
-Vertical Frequency
The product displays a single image
multiple times per second (like a
fluorescent light) to display what the
viewer sees. The rate of a single image
being displayed repeatedly per second is
called vertical frequency or refresh rate.
Vertical frequency is measured in Hz.
Resolution Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 640 x 480 37.500 75.000 31.500 -/-
VESA, 800 x 600 35.156 56.250 36.000 +/+
VESA, 800 x 600 37.879 60.317 40.000 +/+
VESA, 800 x 600 48.077 72.188 50.000 +/+
VESA, 800 x 600 46.875 75.000 49.500 +/+
VESA, 1024 x 768 48.363 60.004 65.000 -/-
VESA, 1024 x 768 56.476 70.069 75.000 -/-
VESA, 1024 x 768 60.023 75.029 78.750 +/+
VESA, 1152 x 864 67.500 75.000 108.000 +/+
VESA, 1280 x 720 45.000 60.000 74.250 +/+
VESA, 1280 x 800 49.702 59.810 83.500 -/+
VESA, 1280 x 1024 63.981 60.020 108.000 +/+
VESA, 1280 x 1024 79.976 75.025 135.000 +/+
VESA, 1366 x 768 47.712 59.790 85.500 +/+
VESA,1440 x 900 55.935 59.887 106.500 -/+
VESA,1600 x 900 60.000 60.000 108.000 +/+
VESA,1680 x 1050 65.290 59.954 146.250 -/+
VESA,1920 x 1080 67.500 60.000 148.500 +/+
Appendix
Responsibility for the Pay Service
(Cost to Customers)
―When the service is requested, in spite of in warranty, we may charge you for a visit from a service
technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
•If a service technician gives instructions on how to use product or simply adjusts options without
disassembling product.
•If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.)
•If a product is reinstalled or devices are connected additionally after installing the purchased
product for the first time.
•If a product is reinstalled to move to a different spot or to move to a different house.
•If customer requests instructions on how to use because of another company's product.
•If customer requests instructions on how to use the network or another company's programme.
•If customer requests software installation and setup for the product.
•If a service technician removes/cleans dusts or foreign materials inside of the product.
•If customer requests an installation additionally after purchasing a product through home-
shopping or online.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
•External impact or drop.
•Use of supplies or separatly sold product unspecified by Samsung.
•Repair from a person besides an engineer of outsourcing service company or partner of Samsung
Electronics Co., Ltd.
•Remodeling or repairing the product by customer.
•Using it with incorrect voltage or non-authorised electrical connections.
•Not following the "cautions" in User Manual.
Others
•If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)
•If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head, Vibrator, Lamp,
Filter, Ribbon, etc.)
―If customer requests a service in case the product has no defect, service fee may be charged. So
please read User Manual first.
WEEE
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset,
USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its
electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them
through your local, free battery return system.
Optimum Picture Quality and Afterimage
Burn-in Prevention
Optimum Picture Quality
•Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm)
may be brighter or darker on the panel. This does not affect product performance.
-The number of sub-pixels by panel type: 6,220,800
•Run Auto Adjustment to improve the picture quality. If noise is still found even after auto
adjustment, adjust Coarse or Fine.
•Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage
burn-in or defective pixels.
-Activate power-saving mode or a dynamic screen saver if you will not be using the product for
an extended period of time.
Prevention of Afterimage Burn-in
What is afterimage burn-in?
Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers
to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period
of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that
control the liquid crystals.
Such a voltage difference between electrodes increases with time and makes the liquid crystals thinner.
When this occurs, a previous image can remain on the screen when the pattern changes. To prevent this,
the accumulated voltage difference should be reduced.
―Afterimage burn-in should not occur when an LCD panel is operating in proper conditions.
Black Matrix
Source Drain
Data Bus-Line
TFT
Gate Pixel Electrode (ITO) Storage
Capaccitor (Cs)
Colour-Filter
Common
Electrode (ITO)
Preventing afterimage burn-in
―The best way to protect the product from afterimage burn-in is switching the power off or setting the
PC or system to run a screen saver when not in use. Also, Warranty service may be limited depending
on instruction guide.
•Powering Off, Screen Saver and Power Saving Mode
-Power off the product for 2 hours after using it for 12 hours.
-Go to Display Properties > Power Supply on your PC and set the product to power off as
required.
-Using a screen saver is recommended.
It is best to use a single-colour or moving-image screen saver.
•Regular colour Change
-Use 2 colours
Switch between 2 colours every 30 minutes as shown above.
FLIGHT FLIGHT
TIME TIME
OZ348
UA102 21:10
20:30
OZ348
UA102 21:10
20:30
Type 1 Type 2
•Avoid combinations of a text colour and background colour of contrasting brightness.
(Brightness: refers to the lightness or darkness of a colour which varies depending on the amount of
light emitted.)
―Avoid using grey as it may contribute to afterimage burn-in.
―Avoid using colours of contrasting brightness (black and white; grey).
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
•Regular Text colour Change
-Use bright colours of similar brightness.
Interval: Change text colour and background colour every 30 minutes
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
-Move and change text every 30 minutes as shown below.
FLIGHT TIME
OZ348 20:30
:
:
[ Step 3 ]
[ Step 2 ]
FLIGHT TIME
OZ348
:
:
[ Step 1 ]
20:30
-Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours.
Licence
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Ⓡ
Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380,
5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723,
7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and
the Symbol together are registered trademarks & DTS Premium Sound | 5.1 is a
trademark of DTS, Inc. ⓒ2012 DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
DivX Certified Ⓡ to play DivX Ⓡ video up to HD 1080p, including premium
content.
DivXⓇ, DivX CertifiedⓇ and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
ABOUT DIVX VIDEO: DivXⓇ is a digital video format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX CertifiedⓇ device that has passed rigorous testing to verify that
it plays DivX video. Visit divx.com for more information and software tools to convert your files into
DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX CertifiedⓇ device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to
complete your registration.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the product menu.
Open Source Licence Notice is written only English.
For information on the Open Source Licence Notice, contact the Samsung Customer Centre or send
email to oss.request@samsung.com.
Terminology
480i / 480p / 720p / 1080i /
1080p____ Each of the scanning
rates above refers to the number of
effective scanning lines that decides
the screen resolution. The scanning
rate may be indicated in i (interlaced)
or p (progressive), depending on the
scanning method.
- Scanning
Scanning refers to a process of sending
pixels that form an image progressively.
A larger number of pixels will deliver a
clearer and more vivid picture.
- Progressive
In progressive scan mode, all lines
of pixels are scanned one by one
(progressively) on the screen.
- Interlaced
In interlaced scan mode, every other
line of pixels is scanned from top to
bottom first and then the remaining
lines of pixels (that were not scanned)
are scanned.
Non-interlace Mode and Interlace
Mode____ Non-interlace mode
(progressive scan) displays a horizontal
line from the top to the bottom of a
screen progressively. Interlace mode
displays the odd number lines first
and the even number lines next. Non-
interlace mode is mainly used in
monitors as it produces screen clarity
and interlace mode is mainly used in
TVs.
Dot Pitch____ The screen consist of
red, green and blue dots. A shorter
distance between the dots produces a
higher resolution. Dot pitch refers to the
distance between the shortest distance
between dots of the same colour. Dot
pitch is measured in millimeters.
Vertical Frequency____ The product
displays a single image many times
per second (like a fluorescent light that
flickers) to display an image for a viewer
to see. The rate of a single image being
displayed repeatedly per second is
called vertical frequency or refresh rate.
Vertical frequency is measured in Hz.
E.g. 60Hz refers to a single image being
displayed 60 times in one second.
Horizontal Frequency____ The time
required to scan a single line from the
left to the right side of the screen is
called a horizontal cycle. The reciprocal
number of a horizontal cycle is called
horizontal frequency. Horizontal
frequency is measured in kHz.
Source____ Input source refers to a
video source device connected to the
product such as a camcorder or video
or DVD player.
Component ports (green, blue and
red)____ The component ports, which
identify, transmit and receive contrast
signals, provide superior picture quality
to any other video connection methods.
Plug & Play____ Plug & Play is a
function that allows the automatic
exchange of information between a
monitor and PC to produce an optimum
display environment. The product uses
VESA DDC (international standard) to
execute Plug & Play.
Resolution____ Resolution is the
number of horizontal dots (pixels) and
vertical dots (pixels) that form a screen.
It represents the level of display detail.
A higher resolution enables more
data to be displayed on the screen
and is useful to perform multiple tasks
simultaneously.
E.g. A resolution of 1920 X 1080 consists
of 1,920 horizontal pixels (horizontal
resolution) and 1,080 vertical pixels
(vertical resolution).
DVD (Digital Versatile Disc)____ DVD
refers to a CD-sized mass storage disk
where you can save multimedia (audio,
video or game) applications using
MPEG-2 video compression technology.
HDMI (High Definition Multimedia
Interface)____ It is an interface that
can be connected to a digital audio
source as well as a high-definition video
source by using a single cable without
compression.
Multiple Display Control (MDC)____
MDC (Multiple Display Control) is an
application that allows multiple display
devices to be controlled simultaneously
using a PC. Communication between
a PC and monitor takes place using
RS232C (serial data transmission) and
RJ45 (LAN) cables.