Samsung LS24E510CS User Manual
Displayed below is the user manual for LS24E510CS by Samsung which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
Monitor
User Manual
The color and the appearance may differ depending on the
product, and the specifications are subject to change without
prior notice to improve the performance.
S24E510C
2
Table of contents
Before Using the Product
Copyright 5
Securing the Installation Space 6
Precautions for storage 6
Safety Precautions 6
Symbols 6
Cleaning 7
Electricity and Safety 7
Installation 8
Operation 10
Correct posture to use the product 13
Preparations
Checking the Components 14
Components 14
Parts 15
Control Panel 15
Direct Key guide 16
Function Key Guide 17
Reverse Side 19
Installation 20
Attaching the Stand 20
Removing the Stand 21
Adjusting the Product Tilt 22
Anti-theft Lock 23
Installing the Wall Mount 24
Wall Mount Kit Specifications (VESA) 25
Connecting and Using a Source
Device
Before Connecting 26
Pre-connection Checkpoints 26
Connecting and Using a PC 26
Connection Using the D-SUB Cable
(Analog Type) 26
Connection Using the HDMI Cable 27
Connection Using an HDMI-DVI Cable 27
Connecting to Headphones or Speakers 28
Connecting the Power 28
Driver Installation 29
Setting Optimum Resolution 29
Screen Setup
SAMSUNG MAGIC Bright 30
Configuring SAMSUNG MAGIC Bright 30
Brightness 32
Configuring Brightness 32
Contrast 33
Configuring Contrast 33
Sharpness 34
Configuring Sharpness 34
Color 35
Configuring Color 35
SAMSUNG MAGIC Upscale 36
Configuring SAMSUNG MAGIC Upscale 36
HDMI Black Level 37
Configuring the HDMI Black Level Settings 37
Eye Saver Mode 38
Configuring Eye Saver Mode 38
Game Mode 39
Configuring Game Mode 39
Response Time 40
Configuring the Response Time 40
Picture Size 41
Changing the Picture Size 41
Screen Adjustment 43
Configuring H-Position & V-Position 43
Configuring Coarse 44
3
Table of contents
Configuring Fine 45
Coordinating OSD
Transparency 46
Changing Transparency 46
Position 47
Configuring Position 47
Language 48
Configuring Language 48
Display Time 49
Configuring Display Time 49
Setup and Reset
Eco Saving Plus 50
Configuring Eco Saving Plus 50
Off Timer 51
Configuring Off Timer 51
Configuring Turn Off After 52
PC/AV Mode 53
Configuring PC/AV Mode 53
Source Detection 54
Configuring Source Detection 54
Key Repeat Time 55
Configuring Key Repeat Time 55
Power LED On 56
Configuring Power LED On 56
Reset All 57
Initializing Settings (Reset All) 57
Information Menu and Others
Information 58
Displaying Information 58
Configuring Brightness, Contrast and
Sharpness from the Initial Screen 59
Configuring Volume in the Initial Screen 60
Volume 60
Installing the Software
Easy Setting Box 61
Installing the Software 61
Removing the Software 61
Troubleshooting Guide
Requirements Before Contacting Samsung
Customer Service Center 62
Testing the Product 62
Checking the Resolution and Frequency 62
Check the following. 63
Q & A 66
Specifications
General 68
PowerSaver 70
Standard Signal Mode Table 71
5
Copyright
The contents of this manual are subject to change without notice to improve quality.
ⓒ 2015 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.
Before Using the Product
Chapter 01
6
Securing the Installation Space
Ensure some space around the product for ventilation. An internal temperature rise may cause fire and
damage the product. Be sure to allow the amount of space as shown below or greater when installing
the product.
―The exterior may differ depending on the product.
10 cm (3.93 Inches)
10 cm
(3.93 Inches)
10 cm
(3.93 Inches)
10 cm
(3.93 Inches)
10 cm
(3.93 Inches)
Precautions for storage
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used
nearby.
―Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product
(Service fee will be charged.)
Safety Precautions
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been
included with this product.
Symbols
Warning
A serious or fatal injury may result if instructions are not followed.
Caution
Personal injury or damage to properties may result if instructions are not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
7
Cleaning
―Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
―Take the following steps when cleaning.
―The following images are for reference only. Real-life situations may differ from what is shown in the
images.
1
Power off the product and computer.
2
Disconnect the power cord from the product.
―Hold the power cable by the plug and do not touch the cable with
wet hands. Otherwise, an electric shock may result.
!
3
Wipe the monitor with a clean, soft and dry cloth.
•Do not apply a cleaning agent that contains alcohol,
solvent, or surfactant to the monitor.
•Do not spray water or detergent directly on the
product.
4
Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the product.
5
Connect the power cord to the product when cleaning is finished.
6
Power on the product and computer.
Electricity and Safety
―The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
•An electric shock or fire may result.
Do not use multiple products with a single power socket.
•Overheated power sockets may cause a fire.
Do not touch the power plug with wet hands. Otherwise, an electric shock
may result.
!
Insert the power plug all the way in so it is not loose.
•An unsecure connection may cause a fire.
!
Connect the power plug to a grounded power socket (type 1 insulated
devices only).
•An electric shock or injury may result.
8
Do not bend or pull the power cord with force. Be careful not to leave the
power cord under a heavy object.
•Damage to the cord may result in a fire or electric shock.
Do not place the power cord or product near heat sources.
•A fire or electric shock may result.
!
Clean any dust around the pins of the power plug or the power socket with
a dry cloth.
•A fire may result.
Caution
Do not disconnect the power cord while the product is being used.
•The product may become damaged by an electric shock.
!
Only use the power cord provided with your product by Samsung. Do not
use the power cord with other products.
•A fire or electric shock may result.
!
Keep the power socket where the power cord is connected unobstructed.
•The power cord must be disconnected to cut off power to the product
when an issue occurs.
!
Hold the plug when disconnecting the power cord from the power socket.
•An electric shock or fire may result.
Installation
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF
THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
•A fire may result.
Do not install the product in poorly ventilated spaces such as a bookcase or
closet.
•An increased internal temperature may cause a fire.
!
Install the product at least 10cm away from the wall to allow ventilation.
•An increased internal temperature may cause a fire.
!
Keep the plastic packaging out of the reach of children.
•Children may suffocate.
9
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.)
•The product may fall and become damaged and/or cause an injury.
•Using the product in an area with excess vibration may damage the
product or cause a fire.
!
Do not install the product in a vehicle or a place exposed to dust, moisture
(water drips, etc.), oil, or smoke.
•A fire or electric shock may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
•The product lifespan may be reduced or a fire may result.
Do not install the product within the reach of young children.
•The product may fall and injure children.
Edible oil, such as soybean oil, can damage or deform the product. Do not
install the product in a kitchen or near a kitchen counter.
Caution
!
Do not drop the product while moving.
•Product failure or personal injury may result.
Do not set down the product on its front.
•The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the
bottom edge of the front of the product is not protruding.
•The product may fall and become damaged and/or cause an injury.
•Install the product only on cabinets or shelves of the right size.
!
Set down the product gently.
•Product failure or personal injury may result.
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of fine
dust, chemical substances, extreme temperatures or a significant presence
of moisture, or a place where the product will operate continuously for an
extended period of time) may seriously affect its performance.
•Be sure to consult Samsung Customer Service Center if you want to
install the product at such a place.
10
Operation
Warning
There is a high voltage inside the product. Never disassemble, repair or
modify the product yourself.
•A fire or electric shock may result.
•Contact Samsung Customer Service Center for repairs.
!
To move the product, first disconnect all the cables from it, including the
power cable.
•Damage to the cord may result in a fire or electric shock.
!
If the product generates abnormal sounds, a burning smell or smoke,
disconnect the power cord immediately and contact Samsung Customer
Service Center.
•An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
•Children may become injured or seriously harmed.
If the product is dropped or the outer case is damaged, turn off the power
and disconnect the power cord. Then contact Samsung Customer Service
Center.
•Continued use can result in a fire or electric shock.
Do not leave heavy objects or items that children like (toys, sweets, etc.) on
top of the product.
•The product or heavy objects may fall as children try to reach for the
toys or sweets resulting in a serious injury.
!
During a lightning or thunderstorm, power off the product and remove the
power cable.
•A fire or electric shock may result.
!
Do not drop objects on the product or apply impact.
•A fire or electric shock may result.
Do not move the product by pulling the power cord or any cable.
•Product failure, an electric shock or fire may result from a damaged
cable.
!GAS
If a gas leakage is found, do not touch the product or power plug. Also,
ventilate the area immediately.
•Sparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cord or any cable.
•Product failure, an electric shock or fire may result from a damaged
cable.
11
!
Do not use or keep combustible spray or an inflammable substance near
the product.
•An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
•An increased internal temperature may cause a fire.
100
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects
that burn easily (paper, matches, etc) into the product (via the vent or input/
output ports, etc).
•Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Center.
•Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
•Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Center.
•Product failure, an electric shock or fire may result.
Caution
!
Leaving the screen fixed on a stationary image for an extended period of
time may cause afterimage burn-in or defective pixels.
•Activate power-saving mode or a moving-picture screen saver if you
will not be using the product for an extended period of time.
-_-
!
Disconnect the power cord from the power socket if you do not plan on
using the product for an extended period of time (vacation, etc).
•Dust accumulation combined with heat can cause a fire, electric shock
or electric leakage.
!
Use the product at the recommended resolution and frequency.
•Your eyesight may deteriorate.
Do not put DC power adapters together.
•Otherwise, a fire may result.
Remove the plastic bag from the DC power adapter before you use it.
•Otherwise, a fire may result.
Do not let water enter the DC power device or get the device wet.
•An electric shock or fire may result.
•Avoid using the product outdoors where it can be exposed to rain or
snow.
•Be careful not to get the DC power adapter wet when you wash the
floor.
12
Do not put the DC power adapter near to any heating apparatus.
•Otherwise, a fire may result.
!
Keep the DC power adapter in a well-ventilated area.
Do not hold the product upside-down or move it by holding the stand.
•The product may fall and become damaged or cause an injury.
!
Looking at the screen too close for an extended period of time can
deteriorate your eyesight.
Do not use humidifiers or stoves around the product.
•A fire or electric shock may result.
!
Rest your eyes for more than 5 minutes for every 1 hour of product use.
•Eye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an
extended period of time as it will become hot.
!
Store small accessories out of the reach of children.
!
Exercise caution when adjusting the product angle or stand height.
•Your hand or finger may get stuck and injured.
•Tilting the product at an excessive angle may cause the product to fall
and an injury may result.
Do not place heavy objects on the product.
•Product failure or personal injury may result.
When using headphones or earphones, do not turn the volume too high.
•Having the sound too loud may damage your hearing.
13
Correct posture to use the product
Use the product in the correct posture as follows:
•Straighten your back.
•Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at
the screen. Keep your eyes directly in front of the screen.
•Adjust the angle so light does not reflect on the screen.
•Keep your forearms perpendicular to your upper arms and level with the back of your hands.
•Keep your elbows at about a right angle.
•Adjust the height of the product so you can keep your knees bent at 90 degrees or more, your
heels attached to the floor, and your arms lower than your heart.
14
Preparations
Chapter 02
Checking the Components
-Contact the vendor where you
purchased the product if any
components are missing.
-The appearance of the components may
differ from the images shown.
-The optimal resolution may not be
available when using a non-high speed
HDMI or HDMI-DVI cable.
Components
―Components may vary depending on the country.
Quick Setup Guide Warranty card
(Not available in some locations) Regulatory guide Power cable (P. 28)
DC power adapter (Detachable)
(P. 28)D-SUB cable (Optional) (P. 26) HDMI cable (Optional) (P. 27) Stand base
Stand neck
15
Parts
Control Panel
―The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
HDMI IN
RGB IN
DC 14V
LEFT
Return
JOG Button Function Key Guide
RIGHT
DOWNPRESS(ENTER)
UP
Icons Description
JOG Button
Multi directional button that helps navigate.
―The JOG button is located on the rear left side of the product. The button can be used to move up, down, left or right, or as Enter.
Function Key Guide
Press the JOG button when the screen is turned on. The Function Key Guide will appear. To access the onscreen menu when the guide
is displayed, press the corresponding direction button again.
―Function Key Guide may vary depending on the function or product model. Please refer to the actual product.
16
Direct Key guide
HDMI mode
Brightness
Volume
Features
Eye Saver Mode O
Analog mode
Brightness
Auto Adjustment
Features
Eye Saver Mode O
―The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the
computer resolution changes, or the input source changes.
―HDMI mode option
•UP/DOWN: Adjust Brightness, Contrast, Sharpness.
•LEFT/RIGHT: Adjust Volume, Mute.
•PRESS(ENTER): Display Function Key Guide.
―Analog mode option
•UP/DOWN: Adjust Brightness, Contrast, Sharpness.
•LEFT/RIGHT: Adjust the screen settings automatically.
―Changing the resolution in Display Properties will activate the Auto Adjustment function.
―This function is only available in Analog mode.
•PRESS(ENTER): Display Function Key Guide.
17
Function Key Guide
―To enter the main menu or to use other items, press the JOG button to display
the Function Key Guide. You can exit by pressing the JOG button again.
Return
UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes.
PRESS(ENTER): The selected item will be applied.
Icons Description
Selects to change the input signal by moving the JOG button in the Function Key
Guide screen. A message will appear on the top left corner of the screen if the input signal
has been changed.
Selects by moving the JOG button in the function key guide screen.
The OSD (On Screen Display) of your Monitor’s feature appears.
OSD control lock: Maintain the current settings, or lock the OSD control to prevent
unintended changes to settings. Enable/Disable: To lock/unlock the OSD control, press the
LEFT button for 10 seconds when the main menu displayed.
―If the OSD control is locked, Brightness and Contrast can be adjusted.
Eye Saver Mode is available.
System Power LED On is available. OnScreen Display can be viewed.
Selects by moving the JOG button in the function key guide screen.
Press to enable or disable Eye Saver Mode.
The items below are not available if the Eye Saver Mode function is enable.
Picture Game Mode,
SAMSUNG
MAGIC
Bright, Brightness, Color
System Eco Saving Plus
Selects to turn the Monitor off by moving the JOG button in the function key guide
screen.
―Actual models because of functional variation, Function key guide options will be different. Please run the corresponding
function based on the actual icon and description.
18
―When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power
could be used as below.
JOG Button Power saving/Non-signal mode
UP Source Change
Down
PRESS(ENTER) for 2 seconds Power Off
―When the monitor displays the Main menu the JOG Button could be used as below.
JOG Button Action
UP/DOWN Move the option
LEFT
Exit the Main menu.
Close Sublist without saving value.
Value decreases in the slider.
RIGHT
Move to next depth.
Value increases in the slider.
PRESS(ENTER)
Move to next depth.
Save the value and close Sublist.
19
Reverse Side
―The color and shape of parts may differ from what is shown. Specifications are
subject to change without notice to improve quality.
HDMI IN RGB IN
DC 14V
HDMI IN
RGB IN
DC 14V
Port Description
Connects to a source device using an HDMI cable or HDMI-DVI cable.
Connect to an audio output device such as headphones.
Connect to a PC using the D-SUB cable.
Connects to the DC power adapter.
20
Installation
Attaching the Stand
―Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
Warning: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1
Insert the stand neck into the stand base in the
direction shown in the figure.
2
Check that the stand neck is firmly connected.
3
Tightly fasten the connecting screw at the bottom of
the stand base.
4
Place the protective Styrofoam (cushion) included in
the package on the floor and place the product facing
down on the Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick sitting mat.
5
Hold the main body of the product with your hand as
shown by the figure. Push the assembled stand into the
main body in the direction of the arrow as shown in the
figure.
RGB IN
- Caution
Do not hold the product upside down only by the
stand.
21
Removing the Stand
―Before assembling the product, place the product down on a flat and stable surface so that the screen
is facing downwards.
Warning: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1
Place the protective Styrofoam (cushion) included in the
package on the floor and place the product facing down
on the Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick sitting mat.
2
While holding the upper part of the monitor with
one hand, pull the stand neck with the other hand in the
arrow direction to detach the stand.
3
Turn the connecting screw at the bottom of the stand
base to separate it.
4
Remove the stand neck from the stand base by pulling it
in the direction of the arrow as shown in the figure.
22
Adjusting the Product Tilt
―The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
-1˚ (±2˚) ~ 20˚ (±2˚)
• You can adjust the product tilt.
•Hold the lower part of the product and adjust the tilt carefully.
23
Anti-theft Lock
―An anti-theft lock allows you to use the product securely even in public places.
―The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.
To lock an anti-theft locking device:
HDMI IN
RGB IN
DC 14V
1
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2
Put one end of the cable through the loop on the other end.
3
Insert the locking device into the anti-theft lock slot at the back of the product.
4
Lock the locking device.
-An anti-theft locking device can be purchased separately.
-Refer to the user guide provided with your anti-theft locking device for details.
-Anti-theft locking devices can be purchased at electronics retailers or online.
24
Installing the Wall Mount Installing the Wall Mount Kit
The wall mount kit allows you to mount the product on the wall.
Purchase a compatible wall-mount kit to use with the product.
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the
wall mount on your own.
25
Wall Mount Kit Specications (VESA)
―Install your wall mount on a solid wall perpendicular to the floor. Before
attaching the wall mount to surfaces other than plaster board, please contact
your nearest dealer for additional information. If you install the product on
a slanted wall, it may fall and result in severe personal injury. Samsung wall
mount kits contain a detailed installation manual and all parts necessary for
assembly are provided.
•For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
•Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury.
•Samsung is not liable for these kinds of accidents.
•Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
•Do not mount the product at more than a 15 degree tilt.
•Always have two people mount the product on a wall.
•Standard dimensions for wall mount kits are shown in the table below.
Unit: mm (inches)
Model name VESA screw hole
specs (A * B) in
millimeters
Standard Screw Quantity
S24E510C 100 x 100 (3.9 x 3.9) M4 4
―Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock.
26
Connecting and Using a Source Device
Chapter 03
Before Connecting
Check the following before you connect this product with other devices.
Pre-connection Checkpoints
―Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to
device.
―Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
―Check the types of ports at the back of the product you want to connect.
Connecting and Using a PC
Select a connection method suitable for your PC.
―Connecting parts may differ in different products.
Connection Using the D-SUB Cable (Analog Type)
―Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
RGB IN
HDMI IN
RGB IN
DC 14V
1
Connect the D-SUB cable to the RGB IN port on the back of the product and the RGB port on the PC.
2
Connect the DC power adapter to the product and a power socket. Next, turn on the power switch on the PC.
3
Change the input source to Analog controlling the JOG button UP/DOWN, when input source is not set.
―Provided ports may vary depending on the product.
27
Connection Using the HDMI Cable
―Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
HDMI IN
HDMI IN
RGB IN
DC 14V
1
Connect the HDMI cable to the HDMI IN port on the back of the product and the HDMI port on
the PC.
2
Connect the DC power adapter to the product and a power socket. Next, turn on the power switch
on the PC.
3
Change the input source to HDMI controlling the JOG button UP/DOWN, when input source is not
set.
―Provided ports may vary depending on the product.
Connection Using an HDMI-DVI Cable
―Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
HDMI IN
HDMI IN
RGB IN
DC 14V
1
Connect the HDMI-DVI cable to the HDMI IN port on the back of the product and the DVI port on
the PC.
2
Connect the DC power adapter to the product and a power socket. Next, turn on the power switch
on the PC.
3
Change the input source to HDMI controlling the JOG button UP/DOWN, when input source is not
set.
―Provided ports may vary depending on the product.
―The audio function is not supported if the source device is connected using the HDMI-DVI cable.
28
Connecting to Headphones or Speakers
―Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
HDMI IN
RGB IN
DC 14V
1
Connect an audio output device such as headphones or speakers to on the product.
―This function is only available in HDMI mode.
―The sound could only be heard when using the HDMI to HDMI cable.
Connecting the Power
Power connection using detachable DC power adapter
HDMI IN
RGB IN
DC 14V
1
2
3
HDMI IN
RGB IN
DC 14V
1
Connect the power cable to the DC power adapter. Then, connect the DC power adapter to the
DC 14V port on the back of the product.
2
Next, connect the power cable to the power outlet.
3
Press the JOG button on the back of the monitor to turn it on.
―The input voltage is switched automatically.
29
Driver Installation
―You can set the optimum resolution and frequency for this product by installing the corresponding
drivers.
―To install the latest version of the product driver, download it from the Samsung Electronics website
at http://www.samsung.com.
1
Click on the "Windows Driver" downloaded from the website.
2
Follow the instructions given on the screen to proceed with installation.
3
Select your product model from the list of models.
4
Go to Display Properties and check that the resolution and refresh rate are appropriate.
Refer to your Windows OS manual for further details.
Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for
the first time after purchase.
Select a language on the product and change the resolution on your PC to the optimum setting.
Setup Guide
The optimal resolution for this monitor is as follows:
****x**** **Hz
Follow the above settings to set the resolution.
Current Resolution
Close
English
Language
****x****
1
Select a language by moving the JOG button LEFT/RIGHT. Next, press the JOG button.
2
To hide the information message, press the JOG button.
―If the optimum resolution is not selected, the message will appear up to three times for a specified
time even when the product is turned off and on again.
―The optimum resolution can also be selected in Control Panel on your PC.
30
Screen Setup
Configure the screen settings such as brightness.
A detailed description of each function is provided. Refer to your product for details.
Chapter 04
SAMSUNG MAGIC Bright
This menu provides an optimum picture quality suitable for the environment
where the product will be used.
―This menu is not available when Eco Saving Plus is enabled.
―This menu is not available when Game Mode is enabled.
―This menu is not available when Eye Saver Mode is enabled.
You can customize the brightness to suit your preferences.
In PC mode
SAMSUNG
MAGICBright
SAMSUNG
MAGICUpscale
Picture
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Set to an optimum
picture quality
suitable for
the working
environment.
Custom
Standard
Cinema
Dynamic Contrast
O
Return
-The displayed image may differ depending on the model.
Conguring SAMSUNG MAGIC Bright
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3
Move to
SAMSUNG
MAGIC
Bright controlling the JOG button UP/DOWN and press the JOG button.
•Custom: Customize the contrast and brightness as required.
•Standard: Obtain a picture quality suitable for editing documents or using Internet.
•Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content.
•Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment.
31
When the external input is connected through HDMI and PC/AV Mode is set to AV,
SAMSUNG
MAGIC
Bright has four automatic picture
settings (Dynamic, Standard, Movie and Custom) that are preset at the factory. You can activate either Dynamic, Standard,
Movie or Custom. You can select Custom which automatically recalls your personalized picture settings.
•Dynamic: Select this mode to view a sharper image than in Standard mode.
•Standard: Select this mode when the surroundings are bright. This also provides a sharp image.
•Movie: Select this mode when the surroundings are dark. This will save power and reduce eye fatigue.
•Custom: Select this mode when you want to adjust the image according to your preferences.
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.
In AV mode
SAMSUNG
MAGICBright
SAMSUNG
MAGICUpscale
Picture
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Set to an optimum
picture quality
suitable for
the working
environment.
Dynamic
Standard
Movie
Custom
O
Return
-The displayed image may differ depending on the model.
32
Brightness
You can adjust the general brightness of the picture. (Range: 0~100)
A higher value will make the picture appear brighter.
―This menu is not available when
SAMSUNG
MAGIC
Bright is set to Dynamic Contrast
mode.
―This menu is not available when Eco Saving Plus is enabled.
―This menu is not available when Eye Saver Mode is enabled.
SAMSUNG
MAGICBright
SAMSUNG
MAGICUpscale
Picture
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Adjust the
brightness level.
Values closer to 100
mean a brighter
screen.
Custom
100
75
60
O
Return
-The displayed image may differ depending on the model.
Conguring Brightness
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Brightness controlling the JOG button UP/DOWN and press the JOG button.
4
Adjust the Brightness controlling the JOG button LEFT/RIGHT.
5
The selected option will be applied.
33
Contrast
Adjust the contrast between the objects and background. (Range: 0~100)
A higher value will increase the contrast to make the object appear clearer.
―This option is not available when
SAMSUNG
MAGIC
Bright is in Cinema or Dynamic
Contrast mode.
―This menu is not available when Game Mode is enabled.
SAMSUNG
MAGICBright
SAMSUNG
MAGICUpscale
Picture
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Adjust the contrast
level. Values closer
to 100 mean a
bigger light/dark
contrast.
Custom
100
75
60
O
Return
-The displayed image may differ depending on the model.
Conguring Contrast
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Contrast controlling the JOG button UP/DOWN and press the JOG button.
4
Adjust the Contrast controlling the JOG button LEFT/RIGHT.
5
The selected option will be applied.
34
Sharpness
Make the outline of objects more clear or blurry. (Range: 0~100)
A higher value will make the outline of objects clearer.
―This option is not available when
SAMSUNG
MAGIC
Bright is in Cinema or Dynamic
Contrast mode.
―This menu is not available when
SAMSUNG
MAGIC
Upscale is in Mode1 or Mode2 mode.
―This menu is not available when Game Mode is enabled.
SAMSUNG
MAGICBright
SAMSUNG
MAGICUpscale
Picture
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Adjust the
sharpness of the
picture. Values
closer to 100 mean
a sharper image.
Custom
100
75
60
O
Return
-The displayed image may differ depending on the model.
Conguring Sharpness
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Sharpness controlling the JOG button UP/DOWN and press the JOG button.
4
Adjust the Sharpness controlling the JOG button LEFT/RIGHT.
5
The selected option will be applied.
35
Color
A detailed description of each function is provided. Refer to your product for
details.
―Adjust the tint of the screen. This menu is not available when
SAMSUNG
MAGIC
Bright is set
to Cinema or Dynamic Contrast mode.
―This menu is not available when Game Mode is enabled.
―This menu is not available when Eye Saver Mode is enabled.
SAMSUNG
MAGICBright
SAMSUNG
MAGICUpscale
Picture
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Congure color
settings.
Custom
100
75
60
O
Return
Color
Red
Green
Blue
Color Tone
Gamma
50
50
50
Normal
Mode1
Adjust the red
saturation level.
Values closer to
100 mean greater
intensity for the
color.
Return
-The displayed image may differ depending on the model.
Conguring Color
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Color controlling the JOG button UP/DOWN and press the JOG button.
•Red: Adjust the red saturation level. Values closer to 100 mean greater intensity for the color.
•Green: Adjust the green saturation level. Values closer to 100 mean greater intensity for the color.
•Blue: Adjust the blue saturation level. Values closer to 100 mean greater intensity for the color.
•Color Tone: Select a color tone that best suits your viewing needs.
-Cool 2: Set the color temperature to be cooler than Cool 1.
-Cool 1: Set the color temperature to be cooler than Normal mode.
-Normal: Display the standard color tone.
-Warm 1: Set the color temperature to be warmer than Normal mode.
-Warm 2: Set the color temperature to be warmer than Warm 1.
-Custom: Customize the color tone.
―When the external input is connected through HDMI and PC/AV Mode is set to AV, Color Tone has four color
temperature settings (Cool, Normal, Warm and Custom).
•Gamma: Adjust the middle level of luminance.
-Mode1 / Mode2 / Mode3
4
Move to the desired option by controlling the JOG button and then press the JOG button.
5
The selected option will be applied.
36
SAMSUNG MAGIC Upscale
SAMSUNG
MAGIC
Upscale function can enhance the layers of the picture details and the
vividness of the picture.
―Adjust the tint of the screen. This menu is not available when
SAMSUNG
MAGIC
Bright is set
to Cinema or Dynamic Contrast mode.
―This menu is not available when Game Mode is enabled.
SAMSUNG
MAGICBright
SAMSUNG
MAGICUpscale
Picture
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Enhance picture
detail and
vividness.
Custom
100
75
O
Mode1
Mode2
Return
-The displayed image may differ depending on the model.
Conguring SAMSUNG MAGIC Upscale
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3
Move to
SAMSUNG
MAGIC
Upscale controlling the JOG button UP/DOWN and press the JOG button.
•Off / Mode1 / Mode2
―Comparing with Mode1, Mode2 has a stronger effect.
4
Move to the desired option by controlling the JOG button and then press the JOG button.
5
The selected option will be applied.
37
HDMI Black Level
If a DVD player or set-top box is connected to the product via HDMI, image quality
degradation (contrast/color degradation, black level, etc.) may occur, depending
on the connected source device. In such case, HDMI Black Level can be used to
adjust the image quality.
If this is the case, correct the degraded picture quality using HDMI Black Level.
―This function is only available in HDMI mode.
해제
SAMSUNG
MAGICBright
SAMSUNG
MAGICUpscale
Picture
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Optimize HDMI
picture brightness
and contrast by
adjusting the black
level of the video
signal.
Normal
Low
Custom
100
75
60
Return
-The displayed image may differ depending on the model.
Conguring the HDMI Black Level Settings
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3
Move to HDMI Black Level controlling the JOG button UP/DOWN and press the JOG button.
•Normal: Select this mode when there is no contrast ratio degradation.
•Low: Select this mode to reduce the black level and increase the white level when there is a contrast ratio degradation.
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.
―HDMI Black Level may not be compatible with some source devices.
―The HDMI Black Level feature is only activated at a certain AV resolution, such as 720P and 1080P.
38
Eye Saver Mode
Set to an optimum picture quality suitable for eye relaxation.
TÜV Rheinland “Low Blue Light Content” is a certification for products which meet
requirements for lower blue light levels. When Eye Saver Mode is 'On', the blue
light that wavelength is around 400nm will become lower and lower, and one
hour later it will approach the optimum picture quality suitable for eye relaxation.
At the same time, the blue light level is lower than in the default settings, and
it was tested by TÜV Rheinland and certified as it met the requirements of TÜV
Rheinland “Low Blue Light Content” standards.
Picture
Eye Saver Mode
Game Mode
Response Time
Picture Size
Screen Adjustment
Set to an optimum
picture quality
suitable for eye
relaxation.
Wide
O
On
Return
-The displayed image may differ depending on the model.
Conguring Eye Saver Mode
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Eye Saver Mode controlling the JOG button UP/DOWN and press the JOG button.
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.
39
Game Mode
Configure the product screen settings for game mode.
Use this feature when playing games on a PC or when a game console such as
PlayStation™ or Xbox™ is connected.
―This menu is not available when Eye Saver Mode is enabled.
와이드
Picture
Eye Saver Mode
Game Mode
Response Time
Picture Size
Screen Adjustment
Optimizes image
settings for playing
games.
O
On
Always On
Return
-The displayed image may differ depending on the model.
Conguring Game Mode
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Game Mode controlling the JOG button UP/DOWN and press the JOG button.
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.
―When the monitor turns off, enters power-saving mode or changes input sources, Game Mode turns Off even if it is set to
On.
―If you want to keep Game Mode enabled all the time, select Always On.
40
Response Time
Accelerate the panel response rate to make video appear more vivid and natural.
―It is best to set Response Time to Standard or Faster when you are not
viewing a movie.
Picture Accelerate the
panel response
rate to make video
appear more vivid
and natural.
Standard
Faster
Fastest
Eye Saver Mode
Game Mode
Response Time
Picture Size
Screen Adjustment
Wide
Return
-The displayed image may differ depending on the model.
Conguring the Response Time
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Response Time controlling the JOG button UP/DOWN and press the JOG button.
•Standard / Faster / Fastest
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.
41
Picture Size
Change the picture size.
In PC mode
Picture
Eye Saver Mode
Game Mode
Response Time
Picture Size
Screen Adjustment
Choose the size and
aspect ratio of the
picture displayed
on screen.
Auto
Wide
O
O
Return
-The displayed image may differ depending on the model.
Changing the Picture Size
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Picture Size controlling the JOG button UP/DOWN and press the JOG button.
In PC mode
•Auto: Display the picture according to the aspect ratio of the input source.
•Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
42
In AV mode
Picture
Eye Saver Mode
Game Mode
Response Time
Picture Size
Screen Adjustment
Choose the size and
aspect ratio of the
picture displayed
on screen.
4:3
16:9
Screen Fit
O
O
Return
-The displayed image may differ depending on the model.
In AV mode
•4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
•16:9: Display the picture with an aspect ratio of 16:9.
•Screen Fit: Display the picture with the original aspect ratio without cutting off.
―The function may not be supported depending on the ports provided with the product.
―Changing the screen size is available when the following conditions are satisfied.
―A digital output device is connected using the HDMI cable.
―The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can support all of
these signals.).
―This can only be set when the external input is connected through HDMI and PC/AV Mode is set to AV.
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.
43
Screen Adjustment
―This menu is available in Analog mode only.
―This menu is only available when Picture Size is set to Screen Fit in AV Mode.
When a 480P or 576P or 720P or 1080P signal is input in AV mode and the
monitor can display normally, select Screen Fit to adjust horizontal position in
0-6 levels.
Screen Adjustment
H-Position
V-Position
Coarse
Fine
Move the image
displayed on the
screen to the left or
right.
50
50
2200
0
Return
Screen Adjustment
H-Position
V-Position
Coarse
Fine
Move the image
displayed on the
screen up or down.
50
50
2200
0
Return
-The displayed image may differ depending on the model.
Conguring H-Position & V-Position
H-Position: Move the screen to the left or right.
V-Position: Move the screen up or down.
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Screen Adjustment controlling the JOG button UP/DOWN and press the JOG button.
4
Move to the H-Position or V-Position controlling the JOG button UP/DOWN and press the JOG button.
5
Adjust the H-Position or V-Position controlling the JOG button LEFT/RIGHT and press the JOG button.
6
The selected option will be applied.
44
Adjust the screen frequency.
―This menu is available in Analog mode only.
Screen Adjustment
H-Position
V-Position
Coarse
Fine
Adjust the screen
frequency.
50
50
2200
0
Return
-The displayed image may differ depending on the model.
Conguring Coarse
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Screen Adjustment controlling the JOG button UP/DOWN and press the JOG button.
4
Move to the Coarse controlling the JOG button UP/DOWN and press the JOG button.
5
Adjust the Coarse controlling the JOG button LEFT/RIGHT.
6
The selected option will be applied.
45
Fine-adjust the screen to obtain a vivid picture.
―This menu is available in Analog mode only.
Screen Adjustment
H-Position
V-Position
Coarse
Fine
Return
Fine-tune the
screen to get a vivid
picture.
50
50
2200
0
-The displayed image may differ depending on the model.
Conguring Fine
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Screen Adjustment controlling the JOG button UP/DOWN and press the JOG button.
4
Move to the Fine controlling the JOG button UP/DOWN and press the JOG button.
5
Adjust the Fine controlling the JOG button LEFT/RIGHT.
6
The selected option will be applied.
46
Coordinating OSD
A detailed description of each function is provided. Refer to your product for details.
Chapter 05
Transparency
Set the transparency for the menu windows.
한국어
OnScreen Display
Transparency
Position
Language
Display Time
Congure the
transparency of the
menu windows.
O
On
20 sec
Return
-The displayed image may differ depending on the model.
Changing Transparency
1
When the Function Key Guide appears, select to display the corresponding menu screen.
2
Move to OnScreen Display controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Transparency controlling the JOG button UP/DOWN and press the JOG button.
•Off / On
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.
47
Position
Position
H-Position
V-Position
100
0
Move the menu
position to the left
or right.
Return
Position
H-Position
V-Position
100
0
Move the menu
position up or
down.
Return
-The displayed image may differ depending on the model.
Conguring Position
H-Position: Move the menu position to the left or right.
V-Position: Move the menu position up or down.
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to OnScreen Display controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Position controlling the JOG button UP/DOWN and press the JOG button.
4
Move to the H-Position or V-Position controlling the JOG button UP/DOWN and press the JOG button.
5
Adjust the H-Position or V-Position controlling the JOG button LEFT/RIGHT and press the JOG button.
6
The selected option will be applied.
48
Language
Set the menu language.
―A change to the language setting will only be applied to the onscreen menu
display.
―It will not be applied to other functions on your PC.
Deutsch
English
Español
Français
Italiano
OnScreen Display
Transparency
Position
Language
Display Time
Return
Set the menu
language.
On
-The displayed image may differ depending on the model.
Conguring Language
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to OnScreen Display controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Language controlling the JOG button UP/DOWN and press the JOG button.
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.
49
Display Time
Set the on-screen display (OSD) menu to automatically disappear if the menu is
not used for a specified period of time.
Display Time can be used to specify the time after which you want the OSD
menu to disappear.
OnScreen Display
Transparency
Position
Language
Display Time
Set how long the
menu window will
remain on screen
for when it is not in
use.
5 sec
10 sec
20 sec
200 sec
On
Return
-The displayed image may differ depending on the model.
Conguring Display Time
1
When the Function Key Guide appears, select to display the corresponding menu screen.
2
Move to OnScreen Display controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Display Time controlling the JOG button UP/DOWN and press the JOG button.
•5 sec / 10 sec / 20 sec / 200 sec
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.
50
Setup and Reset
A detailed description of each function is provided. Refer to your product for details.
Chapter 06
Eco Saving Plus
The Eco Saving Plus function reduces power consumption by controlling the
electric current used by the monitor panel.
―This option is not available when
SAMSUNG
MAGIC
Bright is in Dynamic Contrast mode.
―This menu is not available when Game Mode is enabled.
―This menu is not available when Eye Saver Mode is enabled.
Eco Saving Plus
O Timer
PC/AV Mode
Source Detection
Key Repeat Time
Power LED On
Reset All
System
Return
Adjust the power
consumption of
the product to save
energy.
Stand-by
O
Auto
Low
High
-The displayed image may differ depending on the model.
Conguring Eco Saving Plus
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to System controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Eco Saving Plus controlling the JOG button UP/DOWN and press the JOG button.
•Off: Deactivate the Eco Saving Plus function.
•Auto: The power consumption will automatically be reduced by about 10% over the current setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
•Low: The power consumption will be reduced by 25% over the default setting.
•High: The power consumption will be reduced by 50% over the default setting.
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.
51
O Timer
You can set the product to automatically turn off.
Eco Saving Plus
O Timer
PC/AV Mode
Source Detection
Key Repeat Time
Power LED On
Reset All
System Enable or disable
the O Timer.
O
Auto
Acceleration
Stand-by
Return
해제
동작
O Timer
Turn O After
O Timer Enable or disable
the O Timer.
O
On
Return
-The displayed image may differ depending on the model.
Conguring O Timer
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to System controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Off Timer controlling the JOG button UP/DOWN and press the JOG button.
•Off: Deactivate the off timer so that the product does not power off automatically.
•On: Activate the off timer so that the product powers off automatically.
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.
52
O Timer
Turn O After
O Timer Set the monitor to
automatically turn
o after a certain
time period.
On
4h
Return
-The displayed image may differ depending on the model.
Conguring Turn O After
―This option is only available when Off Timer is set to On.
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to System controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Off Timer controlling the JOG button UP/DOWN and press the JOG button.
4
Move to Turn Off After controlling the JOG button UP/DOWN and press the JOG button.
5
Adjust the Turn Off After controlling the JOG button LEFT/RIGHT.
6
The selected option will be applied.
―The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number
of hours.
―For products for the market in some regions, the Off Timer is set to automatically activate 4 hours after the product powers
on. This is done in accordance with power supply regulations. If you do not want the timer to activate, go to MENU
System and set Off Timer to Off.
53
PC/AV Mode
Set PC/AV Mode to AV. The picture size will be enlarged.
This option is useful when you view a movie.
Eco Saving Plus
O Timer
PC/AV Mode
Source Detection
Key Repeat Time
Power LED On
Reset All
System Set to AV to enlarge
the picture.
O
Auto
Acceleration
Stand-by
Return
PC/AV Mode
HDMI PC
AV
Select the PC/AV
mode for the HDMI
source.
Return
-The displayed image may differ depending on the model.
―This function does not support Analog mode.
―Supplied for the wide models only such as 16:9 or 16:10.
―If the monitor is in HDMI mode and the screen says Check Signal Cable or power saving mode activates, press the JOG
button to display the function-button screen and then select the icon. You can select PC or AV.
Conguring PC/AV Mode
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to System controlling the JOG button UP/DOWN and press the JOG button.
3
Move to PC/AV Mode controlling the JOG button UP/DOWN and press the JOG button.
4
Move to the HDMI controlling the JOG button UP/DOWN and press the JOG button.
•Set to PC when connected to a PC.
•Set to AV when connected to an AV device.
5
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
6
The selected option will be applied.
54
Source Detection
You can activate Source Detection.
Eco Saving Plus
O Timer
PC/AV Mode
Source Detection
Key Repeat Time
Power LED On
Reset All
System Decide how input
sources will be
detected.
Auto
Manual
O
Return
-The displayed image may differ depending on the model.
Conguring Source Detection
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to System controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Source Detection controlling the JOG button UP/DOWN and press the JOG button.
•Auto: The input source is automatically recognized.
•Manual: Manually select an input source.
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.
55
Key Repeat Time
Control the response rate of a button when the button is pressed.
자동
수동
Eco Saving Plus
O Timer
PC/AV Mode
Source Detection
Key Repeat Time
Power LED On
Reset All
System
Return
Congure the
response rate of a
button when the
button is pressed.
Acceleration
1 sec
2 sec
No Repeat
O
-The displayed image may differ depending on the model.
Conguring Key Repeat Time
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to System controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Key Repeat Time controlling the JOG button UP/DOWN and press the JOG button.
•Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is
pressed.
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.
56
Power LED On
Configure the settings to enable or disable the power LED located at the lower
part of the product.
Eco Saving Plus
O Timer
PC/AV Mode
Source Detection
Key Repeat Time
Power LED On
Reset All
System
Return
Set the status of the
power LED.
Working
Stand-by
O
Auto
-The displayed image may differ depending on the model.
Conguring Power LED On
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to System controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Power LED On controlling the JOG button UP/DOWN and press the JOG button.
•Working: The power LED is on when the product is turned on.
•Stand-by: The power LED is on when the product is turned off.
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.
57
Reset All
Return all the settings for the product to the default factory settings.
Image Size
Eco Saving Plus
O Timer
PC/AV Mode
Source Detection
Key Repeat Time
Power LED On
Reset All
Return
System
O
Auto
Acceleration
Stand-by
Return all the
settings for the
product to the
default factory
settings.
All the menu settings will be reset to default.
Are you sure you want to reset?
Yes No
-The displayed image may differ depending on the model.
Initializing Settings (Reset All)
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to System controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Reset All controlling the JOG button UP/DOWN and press the JOG button.
4
Move to the desired option controlling the JOG button LEFT/RIGHT and press the JOG button.
5
The selected option will be applied.
58
Information Menu and Others
A detailed description of each function is provided. Refer to your product for details.
Chapter 07
Information
Picture
OnScreen Display
System
Information
Information
Exit
S/N:***************
Analog
**kHz **Hz PP
****x****
Optimal Mode
****x**** **Hz
S/N:***************
HDMI
**kHz **Hz PP
****x****
Optimal Mode
****x**** **Hz
Information
Exit
Picture
OnScreen Display
System
Information
-The displayed image may differ depending on the model.
Displaying Information
View the current input source, frequency and resolution.
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to Information controlling the JOG button UP/DOWN and press the JOG button. The current input source,
frequency and resolution will appear.
59
Conguring Brightness, Contrast
and Sharpness from the Initial
Screen
You can adjust Brightness, Contrast or Sharpness by moving the JOG button up
or down, if no OSD menu is displayed.
Brightness
Contrast
Sharpness
100
-The displayed image may differ depending on the model.
Brightness
―This menu is not available when
SAMSUNG
MAGIC
Bright is set to Dynamic Contrast mode.
―This menu is not available when Eco Saving Plus is enabled.
―This menu is not available when Eye Saver Mode is enabled.
Contrast
―This menu is not available when
SAMSUNG
MAGIC
Bright is in Cinema or Dynamic Contrast mode.
―This menu is not available when Game Mode is enabled.
Sharpness
―This menu is not available when
SAMSUNG
MAGIC
Bright is in Cinema or Dynamic Contrast mode.
―This menu is not available when Game Mode is enabled.
1
Move the JOG button UP/DOWN to select Brightness, Contrast or Sharpness.
2
Move the JOG button LEFT/RIGHT to adjust the Brightness, Contrast or Sharpness setting.
60
Conguring Volume in the Initial
Screen
You can adjust Volume by moving the JOG button left or right, if no OSD menu is
displayed.
This function does not support HDMI mode.
Mute
Volume 50
Mute
-The displayed image may differ depending on the model.
Volume
1
Adjust the Volume controlling the JOG button LEFT/RIGHT.
―If the audio quality of a connected input device is poor, the Auto Mute function on the product may mute the sound or
cause choppy audio when applying the headphones or speakers. Set the input volume for the input device to at least 20%
and control the volume using the volume control (JOG button LEFT/RIGHT) on the product.
―What is Auto Mute?
The function mutes the audio to improve sound effect when there is sound noise or when the input signal is weak,
usually due to a problem with the volume of an input device.
―To activate the Mute function, access the Volume control screen, then use the JOG button to move the focus down.
To deactivate the Mute function, access the Volume control screen, then increase or decrease the Volume.
61
Installing the Software
Chapter 08
Easy Setting Box
Easy Setting Box
Easy Setting Box enables users to use the monitor by partitioning multiple sections.
Installing the Software
1
To install the latest version of Easy Setting Box, download it from the Samsung Electronics website
at http://www.samsung.com.
2
Select the Easy Setting Box setup program.
3
When the Installation Wizard appears, click Next.
4
Follow the instructions given on the screen to proceed with installation.
―The software may not work properly if you do not restart the computer after the installation.
―The Easy Setting Box icon may not appear depending on the computer system and the product
specifications.
―If the shortcut icon does not appear, press the F5 key.
Restrictions and Problems with the Installation (Easy Setting Box)
The Easy Setting Box installation may be affected by the Graphics Card, Motherboard and the
Networking Environment.
System Requirements
OS
•Windows Vista 32Bit/64Bit
•Windows 7 32Bit/64Bit
•Windows 8 32Bit/64Bit
•Windows 8.1 32Bit/64Bit
Hardware
•At least 32MB of memory
•At least 60MB of free space on the hard disk drive
Removing the Software
Click Start, select Settings/Control Panel, and then double-click Add or Remove Programs.
Select Easy Setting Box from the program list and click the Add/Delete button.
62
Troubleshooting Guide
Chapter 09
Requirements Before Contacting Samsung Customer Service Center
Before calling Samsung Customer Service
Center, test your product as follows. If
the problem persists, contact Samsung
Customer Service Center.
Testing the Product
Check if your product is operating normally by using the product test function.
If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test.
1
Power off both the PC and product.
2
Disconnect the cables from the product.
3
Power on the product.
4
If the message Check Signal Cable appears, the product is working normally.
Checking the Resolution and Frequency
For a mode that exceeds the supported resolution(refer to Standard Signal Mode Table), the message Not Optimum Mode will appear for a short time.
―The displayed resolution may vary depending on the product or PC system settings.
If the screen remains blank, check the PC
system, video controller and cable.
63
Check the following.
Installation issue (PC mode)
Issues Solutions
The screen keeps switching on and o.
Check the cable connection between the product and PC, and ensure the connectors are locked.
Blank spaces are found on all four sides of the screen when
an HDMI or HDMI-DVI cable is connected to the product and
PC.
The blank spaces found on the screen have nothing to do with the product.
Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust the
screen size in the HDMI or DVI settings for the graphics card.
If the graphics card settings menu does not have an option to adjust the screen size, update the
graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer for further details about how to adjust
the screen settings.)
Screen issue
Issues Solutions
The power LED is o. The screen will not switch on.
Check that the power cable is connected properly.
The message Check Signal Cable appears.
Check that the cable is properly connected to the product.
Check that the device connected to the product is powered on.
Not Optimum Mode is displayed.
This message appears when the signal from the graphics card exceeds the maximum resolution or
frequency for the product.
Change the maximum resolution and frequency to suit the product performance, referring to Standard
Signal Mode Table (P. 71).
The images on the screen look distorted.
Check the cable connection to the product.
64
Issues Solutions
The screen is not clear. The screen is blurry.
Adjust Coarse and Fine.
Remove any accessories (video extension cable, etc.) and try again.
Set the resolution and frequency to the recommended level.
The screen appears unstable and shaky.
Check that the resolution and frequency for the PC are within the range of resolution and frequency
compatible with the product. Next, if required, change the settings, referring to Standard Signal Mode
Table (P. 71) in this manual and the Information menu on the product.
There are shadows or ghost images left on the screen.
The screen is too bright. The screen is too dark.
Adjust Brightness and Contrast.
Screen color is inconsistent.
Change the Color settings.
The colors on the screen have a shadow and are distorted.
Change the Color settings.
White does not really look white.
Change the Color settings.
There is no image on the screen and the power LED blinks
every 0.5 to 1 second.
The product is operating in power-saving mode.
Press any key on the keyboard or move the mouse to return to normal operating mode.
Text is blurry.
If using a Windows OS (e.g. Windows 7, Windows 8 or Windows 8.1): Go to Control Panel Fonts
Adjust ClearType text and change Turn on ClearType.
Video playback is choppy.
Playback of high-definition large video files can be choppy. This may be because the video player is
not optimized for the computer resource.
Try playing the file on another video player.
65
Sound issue
Issues Solutions
There is no sound.
Check the connection of the audio cable or adjust the volume.
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound
card or software program.
Video is available but there is no sound.
Sound cannot be heard if a HDMI-DVI cable is used to connect the input device.
Connect the device using an HDMI cable.
Source device issue
Issues Solutions
A beeping sound is heard when my PC is booting.
If a beeping sound is heard when your PC is booting, have your PC serviced.
66
Q & A
Question Answer
How can I change the frequency?
Set the frequency on your graphics card.
•Windows XP: Go to Control Panel Appearance and Themes Display Settings
Advanced Monitor, and adjust Refresh rate under Monitor settings.
•Windows ME/2000: Go to Control Panel Display Settings Advanced Monitor, and
adjust Refresh rate under Monitor settings.
•Windows Vista: Go to Control Panel Appearance and Personalization Personalization
Display Settings Advanced Settings Monitor, and adjust Refresh rate under
Monitor settings.
•Windows 7: Go to Control Panel Appearance and Personalization Display Screen
Resolution Advanced settings Monitor, and adjust Refresh rate under Monitor
settings.
•Windows 8(Windows 8.1): Go to Settings Control Panel Appearance and
Personalization Display Screen Resolution Advanced settings Monitor, and
adjust Refresh rate under Monitor settings.
How can I change the resolution?
•Windows XP: Go to Control Panel Appearance and Themes Display Settings, and
adjust the resolution.
•Windows ME/2000: Go to Control Panel Display Settings, and adjust the resolution.
•Windows Vista: Go to Control Panel Appearance and Personalization Personalize
Display Settings, and adjust the resolution.
•Windows 7: Go to Control Panel Appearance and Personalization Display Adjust
Resolution, and adjust the resolution.
•Windows 8(Windows 8.1): Go to Settings Control Panel Appearance and
Personalization Display Adjust Resolution, and adjust the resolution.
Refer to the user manual for your PC or
graphics card for further instructions on
adjustment.
67
Question Answer
How do I set power-saving mode?
•Windows XP: Set power-saving mode in Control Panel Appearance and Themes Display
Screen Saver Settings or BIOS SETUP on the PC.
•Windows ME/2000: Set power-saving mode in Control Panel Display Screen Saver
Settings or BIOS SETUP on the PC.
•Windows Vista: Set power-saving mode in Control Panel Appearance and Personalization
Personalize Screen Saver Settings or BIOS SETUP on the PC.
•Windows 7: Set power-saving mode in Control Panel Appearance and Personalization
Personalize Screen Saver Settings or BIOS SETUP on the PC.
•Windows 8(Windows 8.1): Set power-saving mode in Settings Control Panel Appearance
and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC.
68
Specications
Chapter 10
-
Size
-
Display area
H
V
-
Dimensions (W x H x D)
W
D
H
General
Model Name S24E510C
Panel Size
24 Class (23.5 Inches / 59 cm)
Display area
521.39 mm (H) x 293.28 mm (V)
20.5 Inches (H) x 11.5 Inches (V)
Pixel Pitch
0.27156 mm (H) x 0.27156 mm (V)
0.010691 Inches (H) x 0.010691 Inches (V)
Dimensions (W x H x D) /
Weight
Without Stand
547.6 x 323.4 x 57.0 mm / 3.3 kg
21.6 x 12.7 x 2.2 Inches / 7.3 lbs
With Stand
547.6 x 417 x 181.6 mm / 4.0 kg
21.6 x 16.4 x 7.1 Inches / 8.8 lbs
Maximum Pixel Clock
148.5 MHz (HDMI)
Power Supply
AC 100 - 240 V ~ (+/- 10 %), 50/60 Hz ± 3 Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Signal connectors
D-SUB, HDMI
69
Model Name S24E510C
Environmental conditions Operating
Temperature: 50 F – 104 F (10 C – 40 C)
Humidity: 10 % – 80 %, non-condensing
Storage
Temperature: -4 F – 113 F (-20 C – 45 C)
Humidity: 5 % – 95 %, non-condensing
―Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor
settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired.
―Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel. This does not affect
product performance.
―The above specifications are subject to change without notice to improve quality.
―This device is a Class B digital apparatus.
(USA only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
70
PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used
for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power-
saving mode only functions when the product is connected to a PC with a power-saving function.
PowerSaver Power Consumption Power saving mode Power o (Power button)
Power Indicator
Off Blinking On
Power Consumption
30 W Less than 0.3 W Less than 0.3 W
―The displayed power consumption level can vary in different operating conditions or when settings are changed.
―This product is not ENERGY STAR® certified.
―SOG(Sync On Green) is not supported.
―To reduce the power consumption to 0, disconnect the power cord. Disconnect the power cable if you will not be using the product for an extended period of time (during
vacation, etc.)
71
Standard Signal Mode Table
-This product can be set to only one
resolution for each screen size to obtain
the optimum picture quality due to the
nature of the panel. Using a resolution
other than the specified resolution may
degrade the picture quality. To avoid
this, it is recommended that you select
the optimum resolution specified for
your product.
Model Name S24E510C
Synchronization Horizontal Frequency
30 – 81 kHz
Vertical Frequency
56 – 60 Hz (HDMI)
Resolution Optimum resolution
1920 x 1080 @ 60 Hz
Maximum resolution
1920 x 1080 @ 60 Hz
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the
PC does not belong to the standard signal modes, the screen may be blank even though the power LED turns on. In such a case, change the settings according to the
following table by referring to the graphics card user manual.
Resolution Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 640 x 480
31.469 59.940 25.175 -/-
VESA, 800 x 600
35.156 56.250 36.000 +/+
VESA, 800 x 600
37.879 60.317 40.000 +/+
VESA, 1024 x 768
48.363 60.004 65.000 -/-
VESA, 1280 x 720
45.000 60.000 74.250 +/+
VESA, 1280 x 800
49.702 59.810 83.500 -/+
VESA, 1280 x 1024
63.981 60.020 108.000 +/+
VESA, 1440 x 900
55.935 59.887 106.500 -/+
VESA, 1600 x 900 RB
60.000 60.000 108.000 +/+
72
Resolution Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 1680 x 1050
65.290 59.954 146.250 -/+
VESA, 1920 x 1080
67.500 60.000 148.500 +/+
-Horizontal Frequency
The time required to scan a single line
from the left to the right side of the
screen is called a horizontal cycle. The
reciprocal number of a horizontal cycle
is called horizontal frequency. Horizontal
frequency is measured in kHz.
-Vertical Frequency
Repeating the same picture dozens of
times per second allows you to view
natural pictures. The repeat frequency is
called "vertical frequency" or "refresh rate"
and is indicated in Hz.
73
Appendix
Chapter 11
Responsibility for the Pay Service
(Cost to Customers)
―When the service is requested, in spite of in warranty, we may charge you for a visit from a service
technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
•If a service technician gives instructions on how to use product or simply adjusts options without
disassembling product.
•If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.)
•If a product is reinstalled or devices are connected additionally after installing the purchased
product for the first time.
•If a product is reinstalled to move to a different spot or to move to a different house.
•If customer requests instructions on how to use because of another company's product.
•If customer requests instructions on how to use the network or another company's program.
•If customer requests software installation and setup for the product.
•If a service technician removes/cleans dusts or foreign materials inside of the product.
•If customer requests an installation additionally after purchasing a product through home-
shopping or online.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
•External impact or drop.
•Use of supplies or separatly sold product unspecified by Samsung.
•Repair from a person besides an engineer of outsourcing service company or partner of Samsung
Electronics Co., Ltd.
•Remodeling or repairing the product by customer.
•Using it with incorrect voltage or non-authorised electrical connections.
•Not following the "cautions" in User Manual.
Others
•If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)
•If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head, Vibrator, Lamp,
Filter, Ribbon, etc.)
―If customer requests a service in case the product has no defect, service fee may be charged. So
please read User Manual first.
74
Terminology
OSD (On Screen Display)____ On
screen display (OSD) allows you to
customize on-screen settings to
optimize the picture quality as required.
You can change the screen brightness,
tint, size and many other settings using
menus displayed on the screen.
Gamma____ The Gamma menu adjusts
the grey scale that represents middle
tones on the screen. Adjusting the
brightness brightens the whole screen,
but adjusting Gamma only brightens
the medium brightness.
Grey scale____ Scale refers to levels
of color intensity that show variations
of color change from darker areas to
brighter areas on the screen. Changes
to the screen brightness are expressed
with black and white variation, and
grey scale refers to the medium area
between black and white. Changing the
grey scale through Gamma adjustment
will change the medium brightness on
the screen.
Scanning rate____ Scanning rate, or
refresh rate, refers to the frequency
of screen refreshes. Screen data is
transmitted as it refreshes to display
an image, although the refreshing is
invisible to the naked eye. The number
of screen refreshes is called scanning
rate and is measured in Hz. A scanning
rate of 60Hz means that the screen
refreshes 60 times per second. The
screen scanning rate depends on the
performance of the graphics cards in
your PC and monitor.
Dot Pitch____ The product and screen
consist of red, green and blue dots.
A shorter distance between the dots
produces a higher resolution. Dot pitch
refers to the distance between the
shortest distance between dots of the
same color. Dot pitch is measured in
millimeters.
Horizontal Frequency____ Characters
or images displayed on the monitor
screen consist of numerous dots (pixels).
Pixels are transmitted in horizontal
lines, which are then arranged vertically
to create an image. The horizontal
frequency is measured in kHz and
represents how many times horizontal
lines per second are transmitted and
displayed on the monitor screen. A
horizontal frequency of 85 means that
the horizontal lines that make up an
image are transmitted 85000 times per
second. The horizontal frequency is
indicated in 85kHz.
Vertical Frequency____ One image is
made of numerous horizontal lines. The
vertical frequency is measured in Hz and
represents how many images can be
created per second by those horizontal
lines. A vertical frequency of 60 means
that an image is transmitted 60 times
per second. The vertical frequency is
also called "refresh rate" and affects
screen flicker.
Resolution____ Resolution is the
number of horizontal pixels and vertical
pixels that form a screen. It represents
the level of display detail. A higher
resolution displays a greater amount
of information on the screen and is
suitable for performing multiple tasks at
the same time.
E.g. A resolution of 1920 x 1080 consists
of 1920 horizontal pixels (horizontal
resolution) and 1080 vertical lines
(vertical resolution).
Plug & Play____ The Plug & Play
feature allows the automatic exchange
of information between a monitor and
PC to produce an optimum display
environment.
The monitor uses VESA DDC
(international standard) to execute Plug
& Play.