Table of Contents
- Table Of Contents
- Before Using the Product
- Preparations
- Connecting and Using a Source Device
- Screen Setup
- Configuring the PIP/PBP Settings
- Coordinating OSD
- Setup and Reset
- Information Menu and Others
- Installing the Software
- Troubleshooting Guide
- Specifications
- Appendix
- Index
Samsung U28E590DSL User Manual
Displayed below is the user manual for U28E590DSL by Samsung which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
User manual
U28E590D
U24E590D
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
BN46-00481B-14
Table Of Contents 2
Table Of Contents
BEFORE USING THE
PRODUCT
7 Copyright
7 Icons used in this manual
8 Cleaning
9 Securing the Installation Space
9 Precautions for storage
10 Safety Precautions
10 Symbols
11 Electricity and Safety
12 Installation and Safety
14 Operation and Safety
18 Correct posture to use the product
PREPARATIONS 19 Checking the Contents
19 Checking the Components
20 Parts
20 Control Panel
21 Direct Key guide
22 Function Key Guide
24 Reverse Side
25 Installation
25 Attaching the Stand
26 Removing the Stand
27 Installing a Wall-mount Kit or Desktop Stand
28 Adjusting the Product Tilt
28 Anti-theft Lock
CONNECTING AND USING
A SOURCE DEVICE
29 Before Connecting
29 Pre-connection Checkpoints
Table Of Contents
Table Of Contents 3
29 Connecting and Using a PC
29 Connection Using the HDMI Cable
30 Connection Using an DP Cable
31 Connecting to Headphones
31 Tidying Up the Connected Cables
32 Connecting the Power
34 Driver Installation
35 Setting Optimum Resolution
SCREEN SETUP 36 SAMSUNG MAGIC Bright
36 Configuring SAMSUNG MAGIC Bright
38 Brightness
38 Configuring Brightness
39 Contrast
39 Configuring Contrast
40 Sharpness
40 Configuring Sharpness
41 Color
41 Configuring Color
43 SAMSUNG MAGIC Angle (U28E590D)
43 Configuring SAMSUNG MAGIC Angle
45 HDMI Black Level
45 Configuring the HDMI Black Level Settings
46 Eye Saver Mode
46 Configuring Eye Saver Mode
47 Game Mode
47 Configuring Game Mode
48 Response Time
48 Configuring the Response Time
49 Picture Size
49 Changing the Picture Size
Table Of Contents
Table Of Contents 4
51 Screen Adjustment
51 Configuring H-Position & V-Position
CONFIGURING THE PIP/
PBP SETTINGS
52 PIP/PBP
53 Configuring PIP/PBP Mode
54 Configuring Size
55 Configuring Position
56 Configuring Sound Source
57 Configuring Source
59 Configuring Picture Size
63 Configuring Contrast
COORDINATING OSD 65 Transparency
65 Changing Transparency
66 Language
66 Configuring Language
67 Display Time
67 Configuring Display Time
SETUP AND RESET 68 FreeSync
68 Configuring FreeSync
71 Eco Saving Plus
71 Configuring Eco Saving Plus
72 Off Timer
72 Configuring Off Timer
73 Configuring Turn Off After
74 PC/AV Mode
74 Configuring PC/AV Mode
75 DisplayPort Ver.
75 Configuring DisplayPort Ver.
76 Source Detection
76 Configuring Source Detection
Table Of Contents
Table Of Contents 5
77 Key Repeat Time
77 Configuring Key Repeat Time
78 Power LED On
78 Configuring Power LED On
79 Reset All
79 Initializing Settings (Reset All)
INFORMATION MENU AND
OTHERS
80 Information
80 Displaying Information
81 Configuring Eye Saver Mode, Brightness,
and Contrast from the Initial Screen
82 Configuring Volume in the Initial Screen
82 Volume
INSTALLING THE
SOFTWARE
83 Easy Setting Box
83 Installing the Software
84 Removing the Software
TROUBLESHOOTING
GUIDE
85 Requirements Before Contacting
Samsung Customer Service Center
85 Testing the Product
85 Checking the Resolution and Frequency
85 Check the following.
88 Q & A
SPECIFICATIONS 90 General
91 PowerSaver
92 Standard Signal Mode Table
7
Before Using the Product
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2015 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is
prohibited.
Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Icons used in this manual
An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
(b) you bring the unit to a repair center and there is no defect in the product
(i.e. where you have failed to read this user manual).
The amount of such administration charge will be advised to you before any work or home visit is
carried out.
The following images are for reference only. Real-life situations may
differ from what is shown in the images.
8
Before Using the Product
Before Using the Product
Cleaning
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1. Power off the monitor and computer.
2. Disconnect the power cord from the monitor.
Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
3. Wipe the monitor screen using a clean, soft and dry cloth.
Do not apply a cleaning agent that contains alcohol,
solvent, or surfactant to the monitor.
Do not spray water or detergent directly on the product.
4. Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the monitor.
5. Connect the power cord to the product after cleaning the product.
6. Power on the monitor and computer.
!
!
9
Before Using the Product
Before Using the Product
Securing the Installation Space
Ensure some space around the product for ventilation. An internal temperature rise may cause fire
and damage the product. Be sure to allow the amount of space as shown below or greater when
installing the product.
The exterior may differ depending on the product.
Precautions for storage
Be sure to contact Samsung Customer Service Center if the inside of the monitor needs cleaning.
(A service fee will be charged.)
3.93
inches
(10 cm)
3.93
inches
(10 cm)
3.93 inches(10 cm)
3.93 inches(10 cm)
3.93 inches
(10 cm)
10
Before Using the Product
Before Using the Product
Safety Precautions
Symbols
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside. It is dangerous to
make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and
maintenance has been included with this product.
Warning A serious or fatal injury may result if instructions are not followed.
Caution Personal injury or damage to properties may result if instructions are
not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
11
Before Using the Product
Before Using the Product
Electricity and Safety
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
An electric shock or fire may result.
Do not plug many products into the same power socket.
Otherwise, the socket may overheat and cause a fire.
Do not touch the power plug with wet hands.
Otherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose.
An unstable connection may cause a fire.
Ensure you connect the power plug to a grounded power socket. (type 1
insulated devices only).
An electric shock or injury may result.
Do not bend or pull the power cord with force. Do not weigh the power cord
down with a heavy object.
A damaged power cord may cause an electric shock or fire.
Do not place the power cord or product near heat sources.
An electric shock or fire may result.
Remove foreign substances such as dust around the plug pins and power socket
with a dry cloth.
Otherwise, a fire may result.
!
!
!
12
Before Using the Product
Before Using the Product
Caution
Installation and Safety
Warning
Do not unplug the power cord when the product is in use.
The product may become damaged by an electric shock.
Do not use the power cord for products other than authorized products supplied
by Samsung.
An electric shock or fire may result.
Keep the power socket where the power cord is connected unobstructed.
If any problem occurs in the product, unplug the power cable to completely
cut the power to the product.
Power to the product cannot be completely cut off with the power button.
Hold the plug when disconnecting the power cord from the power socket.
An electric shock or fire may result.
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP
OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
Otherwise, a fire may result.
Avoid installing the product in a narrow space with bad ventilation, such as a
bookshelf or wall closet.
Otherwise, a fire may result due to an increased internal temperature.
Keep the plastic packaging bag for the product in a place that cannot be reached
by children.
Children may suffocate.
!
!
!
!
13
Before Using the Product
Before Using the Product
Caution
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.).
The product may fall and break or cause a personal injury.
Using the product in an area with excess vibration may damage the product
or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water
drips, etc.), oil, or smoke.
An electric shock or fire may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
Otherwise, the product lifespan may be reduced, or a fire may result.
Do not install the product within the reach of young children.
The product may fall and injure children.
Edible oil (such as soybean oil) may damage or distort the product. Keep the
product away from oil pollution.
And do not install or use the product in the kitchen or near the kitchen stove.
Take care not to drop the product when moving it.
Otherwise, product failure or personal injury may result.
Do not set down the product on its front.
The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom
edge of the front of the product is not protruding.
The product may fall and break or cause a personal injury.
Install the product only on cabinets or shelves of the right size.
!
!
14
Before Using the Product
Before Using the Product
Operation and Safety
Warning
Put down the product carefully.
The product may fall and break or cause a personal injury.
Installing the product in an unusual place (a place exposed to a lot of fine dust,
chemical substances, extreme temperatures or a significant presence of
moisture, or a place where the product will operate continuously for an extended
period of time) may seriously affect its performance.
Be sure to consult Samsung Customer Service Center before installation if
you want to install the product at such a place.
High voltage runs through the product. Do not attempt to disassemble, repair, or
modify the product on your own.
An electric shock or fire may result.
Contact Samsung Customer Service Center for repair.
To move the product, first disconnect all the cables from it, including the power
cable.
Otherwise, the power cord may be damaged and a fire or electric shock may
result.
If the product generates a strange noise, a burning smell, or smoke, remove the
power cord immediately and contact Samsung Customer Service Center.
An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
The product may fall, and your child may become injured or seriously
harmed.
If the product falls or the exterior is damaged, power off the product, remove the
power cord, and contact Samsung Customer Service Center.
Otherwise, an electric shock or fire may result.
Do not put a heavy object, toy, or sweets on top of the product.
The product or heavy objects may fall as children try to reach for the toy or
sweets resulting in a serious injury.
!
SAMSUNG
!
!
!
15
Before Using the Product
Before Using the Product
If there is a thunderstorm or lightning strike, turn off the power and disconnect the
power cable.
An electric shock or fire may result.
Do not drop objects on the product or apply impact.
An electric shock or fire may result.
Do not move the product by pulling the power cord or any cable.
Otherwise, the cable may be damaged and product failure, an electric shock
or fire may result.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate
the area immediately.
Sparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cord or any cable.
Otherwise, the cable may be damaged and product failure, an electric shock
or fire may result.
Do not use or keep combustible spray or an inflammable substance near the
product.
An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
Otherwise, a fire may result from an increased internal temperature.
Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable
object (paper, match, etc.) into the vent or ports of the product.
If water or any foreign substance enters the product, be sure to power off the
product, remove the power cord, and contact Samsung Customer Service
Center.
Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
If water or any foreign substance enters the product, be sure to power off the
product, remove the power cord, and contact Samsung Customer Service
Center.
Product failure, an electric shock or fire may result.
!
!
!
GAS
!
10 0
16
Before Using the Product
Before Using the Product
Caution
Leaving the screen fixed on a stationary image for an extended period of time
may cause afterimage burn-in or defective pixels.
If you are not going to use the product for an extended period of time,
activate power-saving mode or a moving-picture screen saver.
Disconnect the power cord from the power socket if you do not plan on using the
product for an extended period of time (vacation, etc.).
Otherwise, a fire may result from accumulated dust, overheating, an electric
shock, or electric leakage.
Use the product at the recommended resolution and frequency.
Otherwise,Your eyesight may deteriorate.
Do not put DC power adapters together.
Otherwise, a fire may result.
Remove the plastic bag from the DC power adapter before you use it.
Otherwise, a fire may result.
Do not let water enter the DC power device or get the device wet.
An electric shock or fire may result.
Avoid using the product outdoors where it can be exposed to rain or snow.
Be careful not to get the DC power adapter wet when you wash the floor.
Do not put the DC power adapter near to any heating apparatus.
Otherwise, a fire may result.
Keep the DC power adapter in a well-ventilated area.
If you place the AC/DC power adapter so that it is hanging with the cord input
facing upwards, water or other foreign substances could enter the Adapter and
cause the Adapter to malfunction.
Make sure to rest the AC/DC power adapter flat on a table or the floor.
!
!
-_-
!
!
!
!
17
Before Using the Product
Before Using the Product
Looking at the screen too close for an extended period of time can deteriorate
your eyesight.
Do not hold the monitor upside-down or move it by holding the stand.
The product may fall and break or cause a personal injury.
Do not use humidifiers or stoves around the product.
An electric shock or fire may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
Eye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an extended
period of time as it will become hot.
Store the small accessories used with the product out of reach of children.
Exercise caution when adjusting the product angle or stand height.
Otherwise, children's fingers or hands may become stuck and injured.
Tilting the product excessively may cause it to fall and result in personal
injury.
Do not place heavy objects on the product.
Product failure or personal injure may result.
When using headphones or earphones, do not turn the volume too high.
Having the sound too loud may damage your hearing.
!
!
!
!
18
Before Using the Product
Before Using the Product
Correct posture to use the product
Use the product in the correct posture as follows:
Straighten your back.
Allow a distance of 45 to 50 cm between your eye and the screen, and look slightly
downward at the screen.
Keep your eyes directly in front of the screen.
Adjust the angle so light does not reflect on the screen.
Keep your forearms perpendicular to your upper arms and level with the back of
your hands.
Keep your elbows at about a right angle.
Adjust the height of the product so you can keep your knees bent at 90 degrees or
more, your heels attached to the floor, and your arms lower than your heart.
19
1 Preparations
1 Preparations
1.1 Checking the Contents
1.1.1 Checking the Components
Contact the dealer from whom you purchased the product if any item is missing.
The appearance of the components may differ from the images shown.
Components
Components may vary depending on the country.
Recommend to use the HDMI cable and DP cable which is provided by the supplier.
The optimal resolution may not be available when using a non-high speed HDMI or HDMI-DVI cable.
To ensure that the screen displays properly and sound can be normal output, a DP cable that
supports 3840 x 2160 at 60 Hz is recommended. An HDMI cable that supports 3840 x 2160 at 30
Hz will work when connect with HDMI 1. An HDMI cable that supports 3840 x 2160 at 60 Hz will
work when connect with HDMI 2.
Quick Setup Guide Warranty card
(Not available in some
locations)
Regulatory guide
User manual
(optional)
Power cable
(Only provided with the
detachable DC power
adapter.)
DC power adapter
(Integrated)
(optional)
DC power adapter
(Detachable)
(optional)
HDMI cable (optional) DP cable (optional)
Stand base Stand neck
20
Preparations
1
1 Preparations
1.2 Parts
1.2.1 Control Panel
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Icons Description
JOG Button
Multi directional button that helps navigate.
The JOG button is located on the rear left side of the product. The
button can be used to move up, down, left or right, or as Enter.
Function Key Guide
Press the JOG button when the screen is turned on. The Function Key
Guide will appear. To access the onscreen menu when the guide is
displayed, press the corresponding direction button again.
Function Key Guide may vary depending on the function or product
model. Please refer to the actual product.
JOG Button
LEFT
Function Key Guide
UP
RIGHT
PRESS(ENTER) DOWN
Return
21
Preparations
1
1 Preparations
1.2.2 Direct Key guide
For guidance on shortcut keys, the below OSD (On Screen Display) will be displayed if you switch the
source or turn on the monitor.
UP/DOWN: Adjust Brightness / Contrast / Eye Saver Mode
LEFT/RIGHT: Adjust Volume.
PRESS(ENTER): Display Function Key Guide.
Eye Saver Mode
Volume
Features
Eye Saver Mode Off
22
Preparations
1
1 Preparations
1.2.3 Function Key Guide
To enter the main menu or to use other items, press the JOG button to display the Function Key Guide.
You can exit by pressing the JOG button again.
UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when
the focus changes.
PRESS(ENTER): The selected item will be applied.
Actual models because of functional variation, Function key guide options will be different.
Please run the corresponding function based on the actual icon and description.
When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for
control source and power could be used as below.
Icons Description
Selects [ ] to change the input signal by moving the JOG button in the Function
Key Guide screen. A message will appear on the top left corner of the screen if the
input signal has been changed.
Selects [ ] by moving the JOG button in the function key guide screen.
The OSD (On Screen Display) of your Monitor’s feature appears.
OSD control lock: Maintain the current settings, or lock the OSD control to prevent
unintended changes to settings. Enable/Disable: To lock/unlock the OSD control,
press the LEFT button for 10 seconds when the main menu displayed.
If the OSD control is locked,
Brightness and Contrast can be adjusted. PIP/PBP is available.
Eye Saver Mode is available. Information can be viewed.
Selects [ ] by moving the JOG button in the function key guide screen.
Press the button when configuring settings for the PIP/PBP function is required.
Selects [ ] to turn the Monitor off by moving the JOG button in the function key
guide screen.
Return
23
Preparations
1
1 Preparations
When the monitor displays the Main menu the JOG Button could be used as below.
JOG Button Power saving/Non-signal mode
UP Source Change
Down
PRESS(ENTER) for 2 seconds Power Off
JOG Button Action
UP/DOWN - Move the option
LEFT
- Exit the Main menu.
- Close Sublist without saving value.
- Value decreases in the slider.
RIGHT - Move to next depth.
- Value increases in the slider.
PRESS(ENTER) - Move to next depth.
- Save the value and close Sublist.
24
Preparations
1
1 Preparations
1.2.4 Reverse Side
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Port About ports
Connect to a source device using an HDMI cable.
HDMI 1 support 3840 x 2160 30 Hz
HDMI 2 support 3840 x 2160 60 Hz
Connects to a PC using a DP cable.
Connect to an audio output device such as headphones.
The sound could only be heard when using the HDMI to HDMI
cable or DP cable.
Connects to the DC power adapter.
25
Preparations
1
1 Preparations
1.3 Installation
1.3.1 Attaching the Stand
Before assembling the product, place the product down on a flat and stable surface so that the screen
is facing downwards.
Insert the stand neck into the
stand base in the direction
shown in the figure.
Check that the stand neck is
firmly connected.
Tightly fasten the connecting
screw at the bottom of the
stand base.
Place a soft cloth over the table
to protect the product and
place the product onto the
cloth so that the front of the
product is facing downwards.
Hold the main body of the
product with your hand as
shown by the figure.
Push the assembled stand into
the main body in the direction
of the arrow as shown in the
figure.
- Caution
Do not hold the product upside
down only by the stand.
26
Preparations
1
1 Preparations
1.3.2 Removing the Stand
Place a soft cloth over the table to protect the product and
place the product onto the cloth so that the front of the product
faces downwards.
To disassemble the stand from the monitor, make sure to press
the lower part of the monitor with one hand, and pull and sway
sideways the stand with the other hand, as shown in the
picture.
Turn the connecting screw at the bottom of the stand base to
separate it.
Remove the stand neck from the stand base by pulling it in the
direction of the arrow as shown in the figure.
27
Preparations
1
1 Preparations
1.3.3 Installing a Wall-mount Kit or Desktop Stand
Power the product off and remove the power cable from the power socket.
Attach the wall-mount kit or desktop stand here
Bracket (sold separately)
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding
parts on the wall-mount kit or desktop stand you want to attach.
Notes
Using a screw longer than the standard length can damage the internal components of the
product.
The length of screws required for a wall mount that does not comply with the VESA standards may
vary depending on the specifications.
Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit
or desktop stand using excessive force. The product may get damaged or fall and cause personal
injury. Samsung shall not be held liable for any damage or injury caused by using improper screws
or attaching the wall-mount kit or desktop stand using excessive force.
Samsung shall not be held liable for any product damage or personal injury caused by using a
wallmount kit other than the one specified or from an attempt to install the wall-mount kit on your
own.
To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10cm
or farther away from the wall.
Be sure to use a wall-mount kit that complies with the standards.
To install the monitor using a wall mount, disconnect the stand base from the monitor.
1 2
43
28
Preparations
1
1 Preparations
1.3.4 Adjusting the Product Tilt
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
You can adjust the tilt of your monitor.
Hold the lower part of the product and adjust the tilt carefully.
1.3.5 Anti-theft Lock
An anti-theft lock allows you to use the product securely even in public places. The locking device shape
and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft
locking device for details. The lock device is sold separately.
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
To lock an anti-theft locking device:
1Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2Put one end of the cable through the loop on the other end.
3Insert the locking device into the anti-theft lock slot at the back of the product.
4Lock the locking device.
An anti-theft locking device can be purchased separately.
Refer to the user guide provided with your anti-theft locking device for details.
Anti-theft locking devices can be purchased at electronics retailers or online.
-2° (±2.0°) – 20° (±2.0°)
29
2 Connecting and Using a Source Device
2 Connecting and Using a Source Device
2.1 Before Connecting
2.1.1 Pre-connection Checkpoints
Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
Check the types of ports at the back of the product you want to connect.
2.2 Connecting and Using a PC
Select a connection method suitable for your PC.
Connecting parts may differ in different products.
If you don't use the cable that came with the components of the monitor, the monitor may not
support the best resolution.
2.2.1 Connection Using the HDMI Cable
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
1Connect the [HDMI IN 1] or [HDMI IN 2] port on the back of the product to the HDMI port on the PC
using an HDMI cable.
2Connect the DC power adapter to the product and a power socket.
Next, turn on the power switch on the PC. (For details, refer to "2.2.5 Connecting the Power".)
3Change the input source to HDMI 1 or HDMI 2 controlling the JOG button UP/DOWN, when input
source is not set.
Provided ports may vary depending on the product.
HDMI IN 1 / HDMI IN 2
30
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
To display 3840 x 2160 at 30 Hz, use an HDMI cable that supports 3840 x 2160 at 30 Hz to
connect HDMI 1.
Make sure that the graphics card of the HDMI source supports 3840 x 2160 at 30 Hz.
To display 3840 x 2160 at 60 Hz, use an HDMI cable that supports 3840 x 2160 at 60 Hz to
connect HDMI 2.
Make sure that the graphics card of the HDMI source supports 3840 x 2160 at 60 Hz.
When connecting an HDMI cable, use the cable that came with the components of the monitor.
If you use an HDMI cable other than provided by Samsung, the image quality may be degraded.
2.2.2 Connection Using an DP Cable
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
1Connect the DP cable to the [DP IN] port on the back of the product and the DP port on the PC.
2Connect the DC power adapter to the product and a power socket. Next, turn on the power switch
on the PC. (For details, refer to "2.2.5 Connecting the Power".)
3Change the input source to DisplayPort controlling the JOG button UP/DOWN, when input source
is not set.
Provided ports may vary depending on the product.
To display 3840 x 2160 at 60 Hz, use a DP cable that supports 3840 x 2160 at 60 Hz.
Make sure that the graphics card of the DP source supports 3840 x 2160 at 60 Hz.
DP IN
31
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.2.3 Connecting to Headphones
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
1Connect an audio output device such as headphones to [ ] port on the product.
The sound could only be heard when you video card's ports support audio out.
2.2.4 Tidying Up the Connected Cables
U28E590D
32
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.2.5 Connecting the Power
Power connection using integrated DC power adapter
Connect the power adapter to [DC 14V] jack on the rear of the product.
Plug in the power cable to the power socket.
The input voltage is switched automatically.
Power connection using detachable DC power adapter
Connect the power cable to the DC power adapter.
Then, connect the DC power adapter to the [DC 14V] port on the back of the product.
Next, connect the power cable to the power outlet.
The input voltage is switched automatically.
DC 14V
DC 14V
33
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
Changing the sound settings on Windows
Control Panel Audio Speaker Speaker Setup
→
→ →
1
3
2
4
34
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.2.6 Driver Installation
You can set the optimum resolution and frequency for this product by installing the corresponding
drivers.
An installation driver is contained on the CD supplied with the product.
If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com/) and
download the file.
1Insert the user manual CD provided with the product into the CD-ROM drive.
2Click "Windows Driver".
3Follow the instructions given on the screen to proceed with installation.
4Select your product model from the list of models.
5Go to Display Properties and check that the resolution and refresh rate are appropriate.
Refer to your Windows OS manual for further details.
35
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.2.7 Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for the
first time after purchase.
Select a language on the product and change the resolution on your PC to the optimum setting.
1Press the JOG button to display the language settings menu.
2To hide the message, move to Close with the JOG button. Next, press the JOG button.
If the optimum resolution is not selected, the message will appear up to three times for a specified
time even when the product is turned off and on again.
The optimum resolution can also be selected in Control Panel on your PC.
&ORVH
7KHRSWLPDOUHVROXWLRQIRUWKLV
PRQLWRULVDVIROORZV
[+]
/DQJXDJH (QJOLVK
8VHWKHDERYHVHWWLQJVWRVHW
WKHUHVROXWLRQRQ\RXU3&
&XUUHQW5HVROXWLRQ[
6HWXS*XLGH
36
3 Screen Setup
3 Screen Setup
Configure the screen settings such as brightness.
A detailed description of each function is provided. Refer to your product for details.
3.1 SAMSUNG MAGIC Bright
This menu provides an optimum picture quality suitable for the environment where the product will be
used.
This menu is not available when Eco Saving Plus is enabled.
This menu is not available when Angle is enabled.
This menu is not available when Game Mode is enabled.
This menu is not available when Eye Saver Mode is enabled.
Not available when PIP/PBP Mode is set to On.
You can customize the brightness to suit your preferences.
3.1.1 Configuring SAMSUNG MAGIC Bright
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3Move to Bright controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
Custom: Customize the contrast and brightness as required.
Standard: Obtain a picture quality suitable for editing documents or using Internet.
Cinema
: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content.
Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment.
U28E590D U24E590D
SAMSUNG
MAGIC
SAMSUNG
MAGIC
SAMSUNG
MAGICBright
SAMSUNG
MAGICAngle
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Off
Return
Picture
Custom
Standard
Cinema
Dynamic Contrast
Set to an optimum
picture quality suitable
for the working
environment.
SAMSUNG
MAGICBright
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Eye Saver Mode Off
Return
Picture
Custom
Standard
Cinema
Dynamic Contrast
Set to an optimum
picture quality suitable
for the working
environment.
37
Screen Setup
3
3 Screen Setup
When the external input is connected through HDMI/DP and PC/AV Mode is set to AV,
Bright has four automatic picture settings (Dynamic, Standard, Movie and Custom) that are
preset at the factory. You can activate either Dynamic, Standard, Movie or Custom. You can
select Custom which automatically recalls your personalized picture settings.
Dynamic: Select this mode to view a sharper image than in Standard mode.
Standard: Select this mode when the surroundings are bright. This also provides a sharp
image.
Movie: Select this mode when the surroundings are dark. This will save power and reduce eye
fatigue.
Custom: Select this mode when you want to adjust the image according to your preferences.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
U28E590D U24E590D
AUTO
SAMSUNG
MAGICBright
SAMSUNG
MAGICAngle
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Off
Low
Return
Picture
Dynamic
Standard
Movie
Custom
Set to an optimum
picture quality suitable
for the working
environment.
AUTO
SAMSUNG
MAGICBright
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Eye Saver Mode
Low
Off
Return
Picture
Dynamic
Standard
Movie
Custom
Set to an optimum
picture quality suitable
for the working
environment.
SAMSUNG
MAGIC
38
Screen Setup
3
3 Screen Setup
3.2 Brightness
You can adjust the general brightness of the picture. (Range: 0~100)
A higher value will make the picture appear brighter.
This menu is not available when Bright is set to Dynamic Contrast mode.
This menu is not available when Eco Saving Plus is enabled.
This menu is not available when Eye Saver Mode is enabled.
3.2.1 Configuring Brightness
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3Move to Brightness controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
4Adjust the Brightness controlling the JOG button LEFT/RIGHT.
5The selected option will be applied.
U28E590D U24E590D
SAMSUNG
MAGIC
AUTO
SAMSUNG
MAGICBright
SAMSUNG
MAGICAngle
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Custom
100
75
60
Off
Return
Picture
Adjust the brightness
level. Values closer to
100 mean a brighter
screen.
AUTO
SAMSUNG
MAGICBright
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Eye Saver Mode
Custom
100
75
60
Off
Return
Picture
Adjust the brightness
level. Values closer to
100 mean a brighter
screen.
39
Screen Setup
3
3 Screen Setup
3.3 Contrast
Adjust the contrast between the objects and background. (Range: 0~100)
A higher value will increase the contrast to make the object appear clearer.
This option is not available when Bright is in Cinema or Dynamic Contrast mode.
This menu is not available when Game Mode is enabled.
This menu is not available when PIP/PBP Mode is set to On and the Size is set to
(PBP Mode).
3.3.1 Configuring Contrast
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3Move to Contrast controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
4Adjust the Contrast controlling the JOG button LEFT/RIGHT.
5The selected option will be applied.
U28E590D U24E590D
SAMSUNG
MAGIC
AUTO
SAMSUNG
MAGICBright
SAMSUNG
MAGICAngle
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Custom
100
75
60
Off
Return
Picture
Adjust the contrast
level. Values closer to
100 mean a bigger
light/dark contrast.
AUTO
SAMSUNG
MAGICBright
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Eye Saver Mode
Custom
100
75
60
Off
Return
Picture
Adjust the contrast
level. Values closer to
100 mean a bigger
light/dark contrast.
40
Screen Setup
3
3 Screen Setup
3.4 Sharpness
Make the outline of objects more clear or blurry. (Range: 0~100)
A higher value will make the outline of objects clearer.
This option is not available when Bright is in Cinema or Dynamic Contrast mode.
This menu is not available when Game Mode is enabled.
Not available when PIP/PBP Mode is set to On.
3.4.1 Configuring Sharpness
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3Move to Sharpness controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
4Adjust the Sharpness controlling the JOG button LEFT/RIGHT.
5The selected option will be applied.
U28E590D U24E590D
SAMSUNG
MAGIC
AUTO
SAMSUNG
MAGICBright
SAMSUNG
MAGICAngle
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Custom
100
75
60
Off
Return
Picture
Adjust the sharpness
of the picture.
Values closer to 100
mean a sharper image.
AUTO
SAMSUNG
MAGICBright
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Eye Saver Mode
Custom
100
75
60
Off
Return
Picture
Adjust the sharpness
of the picture.
Values closer to 100
mean a sharper image.
41
Screen Setup
3
3 Screen Setup
3.5 Color
A detailed description of each function is provided. Refer to your product for details.
Adjust the tint of the screen. This menu is not available when Bright is set to Cinema or
Dynamic Contrast mode.
This menu is not available when Game Mode is enabled.
This menu is not available when Eye Saver Mode is enabled.
The Color Tone and Gamma menu is not available when Angle is enabled.
Not available when PIP/PBP Mode is set to On.
3.5.1 Configuring Color
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3Move to Color controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
Red: Adjust the red saturation level. Values closer to 100 mean greater intensity for the color.
Green: Adjust the green saturation level. Values closer to 100 mean greater intensity for the
color.
Blue: Adjust the blue saturation level. Values closer to 100 mean greater intensity for the color.
Color Tone: Select a color tone that best suits your viewing needs.
Cool 2: Set the color temperature to be cooler than Cool 1.
U28E590D U24E590D
SAMSUNG
MAGIC
SAMSUNG
MAGIC
AUTO
SAMSUNG
MAGICBright
SAMSUNG
MAGICAngle
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Custom
100
75
60
Off
Return
Picture
Configure color
settings.
AUTO
SAMSUNG
MAGICBright
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Eye Saver Mode
Custom
100
75
60
Off
Return
Picture
Configure color
settings.
AUTO
Red
Green
Blue
Color Tone
Gamma
Return
Color
Adjust the red
saturation level.
Values closer to 100
mean greater
intensity for the color.
50
50
50
Normal
Mode1
42
Screen Setup
3
3 Screen Setup
Cool 1: Set the color temperature to be cooler than Normal mode.
Normal: Display the standard color tone.
Warm 1: Set the color temperature to be warmer than Normal mode.
Warm 2: Set the color temperature to be warmer than Warm 1.
Custom: Customize the color tone.
When the external input is connected through HDMI/DP and PC/AV Mode is set to AV,
Color Tone has four color temperature settings (Cool, Normal, Warm and Custom).
Gamma: Adjust the middle level of luminance.
Mode1
Mode2
Mode3
4Move to the desired option by controlling the JOG button and then press the JOG button.
5The selected option will be applied.
43
Screen Setup
3
3 Screen Setup
3.6 SAMSUNG MAGIC Angle (U28E590D)
Angle allows you to configure the settings to obtain the optimum picture quality according to your
viewing angle.
This option is not available when Bright is in Cinema or Dynamic Contrast mode.
This menu is not available when Game Mode is enabled.
This menu is not available when Eye Saver Mode is enabled.
Not available when PIP/PBP Mode is set to On.
This feature provides the viewing angle, brightness, and tint to suit your preferences.
3.6.1 Configuring SAMSUNG MAGIC Angle
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3Move to Angle controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
SAMSUNG
MAGIC
SAMSUNG
MAGIC
SAMSUNG
MAGIC
AUTO
SAMSUNG
MAGICBright
SAMSUNG
MAGICAngle
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Custom
100
75
60
Off
Return
Picture
Select an angle that
best suits your viewing
position.
Off
Lean Back Mode 1
Lean Back Mode 2
Standing Mode
Side Mode
44
Screen Setup
3
3 Screen Setup
Off : Select this option to view directly in front of the product.
Lean Back Mode 1 : Select this option to view from a place slightly lower than the product.
Lean Back Mode 2 : Select this option to view from a place lower than Lean Back Mode 1.
Standing Mode : Select this option to view from a place higher than the product.
Side Mode : Select this option to view from either side of the product.
Group View: Select this option for more than one viewer to view from places , and .
Custom: Lean Back Mode 1 will be applied by default if Custom is selected.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
AUTO
SAMSUNG
MAGICBright
SAMSUNG
MAGICAngle
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Custom
100
75
60
Off
Return
Picture
Select an angle that
best suits your viewing
position.
Group View
Custom
4
2
3
11
5 5
①
②
③
④
⑤
①
④
⑤
45
Screen Setup
3
3 Screen Setup
3.7 HDMI Black Level
If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/
color degradation, black level, etc.) may occur, depending on the connected source device. In such
case, HDMI Black Level can be used to adjust the image quality. If this is the case, correct the degraded
picture quality using HDMI Black Level.
This function is only available in HDMI 1 or HDMI 2 mode.
Not available when PIP/PBP Mode is set to On.
3.7.1 Configuring the HDMI Black Level Settings
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3Move to HDMI Black Level controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
Normal: Select this mode when there is no contrast ratio degradation.
Low: Select this mode to reduce the black level and increase the white level when there is a
contrast ratio degradation.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
HDMI Black Level may not be compatible with some source devices.
U28E590D U24E590D
AUTO
SAMSUNG
MAGICBright
SAMSUNG
MAGICAngle
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Dynamic
100
75
60
Off
Return
Picture
Optimize HDMI picture
brightness and contrast
by adjusting the black
level of the video signal.
Normal
Low
AUTO
SAMSUNG
MAGICBright
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Eye Saver Mode
Dynamic
100
75
60
Off
Return
Picture
Optimize HDMI picture
brightness and contrast
by adjusting the black
level of the video signal.
Normal
Low
46
Screen Setup
3
3 Screen Setup
3.8 Eye Saver Mode
Not available when PIP/PBP Mode is set to On.
Set to an optimum picture quality suitable for eye relaxation.
TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for lower
blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm will
decrease, and it will provide an optimum picture quality suitable for eye relaxation. At the same time, the
blue light level is lower than in the default settings, and it was tested by TÜV Rheinland and certified as it
met the requirements of TÜV Rheinland “Low Blue Light Content” standards.
3.8.1 Configuring Eye Saver Mode
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3Move to Eye Saver Mode controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
U28E590D U24E590D
AUTO
Eye Saver Mode
Game Mode
Response Time
Picture Size
Screen Adjustment
Wide
Return
Picture
Set to an optimum
picture quality suitable
for eye relaxation.
Off
On
AUTO
Brightness
Contrast
Sharpness
Color
HDMI Black Level
Eye Saver Mode
Return
Picture
Set to an optimum
picture quality suitable
for eye relaxation.
Off
On
SAMSUNG
MAGICBright Custom
100
75
60
47
Screen Setup
3
3 Screen Setup
3.9 Game Mode
Configure the product screen settings for game mode.
Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™
is connected.
This menu is not available when Eye Saver Mode is enabled.
Not available when PIP/PBP Mode is set to On.
3.9.1 Configuring Game Mode
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3Move to Game Mode controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
Game Mode turns Off when the monitor turns on, power-saving mode activates, or the input
source changes.
If you want to keep Game Mode enabled all the time, select Always On.
U28E590D U24E590D
AUTO
Eye Saver Mode
Game Mode
Response Time
Picture Size
Screen Adjustment
16:9
Return
Picture
Optimizes image
settings for playing
games.
Off
On
Always On
AUTO
Game Mode
Response Time
Picture Size
Screen Adjustment
Return
Picture
Optimizes image
settings for playing
games.
Off
On
Always On
48
Screen Setup
3
3 Screen Setup
3.10 Response Time
Accelerate the panel response rate to make video appear more vivid and natural.
It is best to set Response Time to Standard or Faster when you are not viewing a movie.
This menu is not available when PIP/PBP Mode is set to On and the Size is set to / /
(PIP Mode).
3.10.1 Configuring the Response Time
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3Move to Response Time controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
U28E590D U24E590D
AUTO
Eye Saver Mode
Game Mode
Response Time
Picture Size
Screen Adjustment
Off
16:9
Return
Picture
Accelerate the panel
response rate to make
video appear more
vivid and natural.
Standard
Faster
Fastest
AUTO
Game Mode
Response Time
Picture Size
Screen Adjustment
Off
16:9
Return
Picture
Accelerate the panel
response rate to make
video appear more
vivid and natural.
Standard
Faster
Fastest
49
Screen Setup
3
3 Screen Setup
3.11 Picture Size
Change the picture size.
This menu is not available when PIP/PBP Mode is set to On and the Size is set to
(PBP Mode).
This menu is not available when FreeSync is enabled.
3.11.1 Changing the Picture Size
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3Move to Picture Size controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
Auto: Display the picture according to the aspect ratio of the input source.
Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
In PC mode
U28E590D U24E590D
AUTO
Eye Saver Mode
Game Mode
Response Time
Picture Size
Screen Adjustment
Off
Off
16:9
Return
Picture
Choose the size and
aspect ratio of the
picture displayed on
screen.
Auto
Wide
AUTO
Game Mode
Response Time
Picture Size
Screen Adjustment
Off
Return
Picture
Choose the size and
aspect ratio of the
picture displayed on
screen.
Auto
Wide
50
Screen Setup
3
3 Screen Setup
4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
16:9: Display the picture with an aspect ratio of 16:9.
Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
off.
The function may not be supported depending on the ports provided with the product.
Changing the screen size is available when the following conditions are satisfied.
A digital output device is connected using the HDMI/DP cable.
The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally
(Not every model can support all of these signals.).
This can only be set when the external input is connected through HDMI/DP and
PC/AV Mode is set to AV.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
In AV mode
U28E590D U24E590D
AUTO
Eye Saver Mode
Game Mode
Response Time
Picture Size
Screen Adjustment
Off
Off
16:9
Return
Picture
Choose the size and
aspect ratio of the
picture displayed on
screen.
4:3
16:9
Screen Fit
AUTO
Game Mode
Response Time
Picture Size
Screen Adjustment
Off
Off
16:9
Return
Picture
Choose the size and
aspect ratio of the
picture displayed on
screen.
4:3
16:9
Screen Fit
51
Screen Setup
3
3 Screen Setup
3.12 Screen Adjustment
3.12.1 Configuring H-Position & V-Position
H-Position: Move the screen to the left or right.
V-Position: Move the screen up or down.
This menu is only available when Picture Size is set to Screen Fit in AV Mode. When a 480P or 576P
or 720P or 1080P signal is input in AV mode and the monitor can display normally, select Screen Fit to
adjust horizontal position in 0-6 levels.
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3Move to Screen Adjustment controlling the JOG button UP/DOWN and press the JOG button.
4Move to the H-Position or V-Position controlling the JOG button UP/DOWN and press the JOG
button.
The following screen will appear.
5Adjust the H-Position or V-Position controlling the JOG button LEFT/RIGHT and press the JOG
button.
6The selected option will be applied.
U28E590D U24E590D
AUTO
Eye Saver Mode
Game Mode
Response Time
Picture Size
Screen Adjustment
Off
Off
Faster
Screen Fit
Return
Picture
AUTO
Game Mode
Response Time
Picture Size
Screen Adjustment
Off
Faster
Screen Fit
Return
Picture
AUTO
H-Position
V-Position
3
3
Return
Screen Adjustment
Move the image
displayed on the
screen to the left or
right.
52
4 Configuring the PIP/PBP Settings
4 Configuring the PIP/PBP Settings
4.1 PIP/PBP
The PIP (Picture in Picture) function separates the screen into two parts. One source device is displayed
on the main screen at the same time the another source device is displayed in inset windows.
The PBP (Picture by Picture) function separates the screen in half displaying output from two different
source devices simultaneously on the left and right sides of the screen.
Compatible with Windows7 and Windows8.
The PIP/PBP function may not be available depending on the specifications of the graphics card
used. If the screen is blank in PIP/PBP mode when the optimum resolution is selected, go to
Control Panel Display Screen Resolution and click Detect on the PC.
(Instructions are based on Windows 7.) If the screen is blank when the resolution is set to the
optimum resolution, change the resolution to 1280 x 1024.
The screen may flicker briefly or appear after a delay when you enable or disable the PIP/PBP
function or when you change the screen size with the PIP/PBP function activated.
This can typically arise when a PC and a monitor are connected to two or more input sources.
It has nothing to do with the performance of a monitor.
The issue is mainly caused when the video signals are delayed in transmission to the monitor
depending on the graphics card performance.
To maximize the picture quality and Sound can be normal output it is recommended to use a
graphics card or DVD that supports 4K (3840 x 2160 at 30HZ) resolution when connect HDMI 1
port.
To maximize the picture quality and Sound can be normal output it is recommended to use a
graphics card or DVD that supports 4K (3840 x 2160 at 60HZ) resolution when connect HDMI 2
port.
When the PIP/PBP function is enabled, the resolution will not be able to automatically switch to
the optimum resolution due to a compatibility issue between the graphics card and the Windows
system. Set PIP/PBP Mode to Off. Alternatively, restart the monitor, then set the resolution to the
optimum setting using the Windows interface.
→
→
53
Configuring the PIP/PBP Settings
4
4 Configuring the PIP/PBP Settings
4.1.1 Configuring PIP/PBP Mode
Enable or disable the PIP/PBP function.
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button.
3Move to the PIP/PBP Mode controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
Off / On
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
Off
Turn PIP/PBP Mode
on or off.
PIP/PBP
Return
f
Off
On
PIP/PBP Mode
Size
Position
Sound Source
Source
Picture Size
Contrast
54
Configuring the PIP/PBP Settings
4
4 Configuring the PIP/PBP Settings
4.1.2 Configuring Size
Select the size and aspect ratio of the sub-screen.
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button.
3Move to the Size controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
: Select the icon image if you want to use PBP mode where the optimum resolution for the
left and right sides of the screen is 1920 x 2160 (width x height).
: Select the icon image if you want to use PIP mode where the optimum resolution for the
sub-screen is 720 x 480 (width x height).
: Select the icon image if you want to use PIP mode where the optimum resolution of the
sub-screen is 1280 x 720 (width x height).
: Select the icon image if you want to use PIP mode where the optimum resolution of the
sub-screen is 1920 x 1080 (width x height).
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
Select the size and
aspect ratio of the
sub-screen.
Main:
HDMI 1
Sub:
HDMI 2
PIP/PBP
Return
PIP/PBP Mode
Size
Position
Sound Source
Source
Picture Size
Contrast 75/100
55
Configuring the PIP/PBP Settings
4
4 Configuring the PIP/PBP Settings
4.1.3 Configuring Position
Select the position of the sub-screen from the available options.
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button.
3Move to the Position controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
/ / /
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
Not available when PBP is selected.
The screen may flicker if the input signal is unstable.
Select the position of
the sub-screen from
the available options.
PIP/PBP
Return
PIP/PBP Mode
Size
Position
Sound Source
Source
Picture Size
Contrast
On
Main:
HDMI 1
Sub:
HDMI 2
56
Configuring the PIP/PBP Settings
4
4 Configuring the PIP/PBP Settings
4.1.4 Configuring Sound Source
Set which screen you want to hear the sound for.
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button.
3Move to the Sound Source controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
The white area of the icon means that the Sound Source comes from the main screen/sub-screen
or the left/right screen.
/
/
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
PIP
PBP
Set which screen you
want to hear the
sound for.
PIP/PBP
Return
PIP/PBP Mode
Size
Position
Sound Source
Source
Picture Size
Contrast
On
75
Main:
HDMI 1
Sub:
HDMI 2
Set which screen you
want to hear the
sound for.
PIP/PBP
Return
PIP/PBP Mode
Size
Position
Sound Source
Source
Picture Size
Contrast
On
75/100
Main:
HDMI 1
Sub:
HDMI 2
57
Configuring the PIP/PBP Settings
4
4 Configuring the PIP/PBP Settings
4.1.5 Configuring Source
Select the source for each screen.
PIP
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button.
3In PIP mode (Size / / ), move the JOG button UP/DOWN to select Source and then press
the JOG button.
The following screen will appear.
HDMI 1
HDMI 2
DisplayPort
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
The input source for the main screen changes.
With the exception of the current input source, the other two input sources can be selected.
The screen may flicker if the input signal is unstable.
When the Function Key Guide appears, move the JOG button LEFT to select the [ ] icon and
then press the JOG button. The main screen will switch in the order
DisplayPort HDMI 1 HDMI 2.
Select the source for
each screen.
PIP/PBP
Return
PIP/PBP Mode
Size
Position
Sound Source
Source
Picture Size
Contrast
DisplayPort
HDMI 2
On
→
→
58
Configuring the PIP/PBP Settings
4
4 Configuring the PIP/PBP Settings
PBP
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button.
3In PBP mode (Size ), move the JOG button UP/DOWN to select Source and then press the
JOG button.
The following screen will appear.
HDMI 1
HDMI 2
DisplayPort
4Control the JOG button UP/DOWN and choose the left/right external input source.
5Move the JOG button LEFT/RIGHT to select Apply and then press the JOG button. Pressing the
JOG button after selecting Cancel will cancel Source configuration and revert back to the PIP/PBP
control menu.
The input source for the main screen changes.
The screen may flicker if the input signal is unstable.
When the input signal of the left and right screens are the same, the operation cannot be
performed.
When the Function Key Guide appears, move the JOG button LEFT to select the [ ] icon and
then press the JOG button. The same PBP source setting menu appears.
Select the source for
each screen.
PIP/PBP
Return
PIP/PBP Mode
Size
Position
Sound Source
Source
Picture Size
Contrast
On
75/100
6RXUFH
$SSO\
&DQFHO
HDMI 1 HDMI 2
59
Configuring the PIP/PBP Settings
4
4 Configuring the PIP/PBP Settings
4.1.6 Configuring Picture Size
Select the image size for sub-screen.
PIP
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button.
3In PIP mode (Size / / ), move the JOG button UP/DOWN to select Picture Size and then
press the JOG button.
The following screen will appear.
Auto: Display the picture according to the aspect ratio of the each screen input source.
Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input
source.
In PC mode
Select the image size
for each screen.
PIP/PBP
Return
PIP/PBP Mode
Size
Position
Sound Source
Source
Picture Size
Contrast
On
75/75
Auto
Wide
60
Configuring the PIP/PBP Settings
4
4 Configuring the PIP/PBP Settings
4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and
standard broadcasts.
16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
anything off.
The function may not be supported depending on the ports provided with the product.
Changing the screen size is available when the following conditions are satisfied.
A digital output device is connected using the HDMI/DP cable.
The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally
(Not every model can support all of these signals.).
This can only be set when the external input is connected through HDMI/DP and
PC/AV Mode is set to AV.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
In AV mode
Select the image size
for each screen.
PIP/PBP
Return
PIP/PBP Mode
Size
Position
Sound Source
Source
Picture Size
Contrast
On
75/75
4:3
16:9
Screen Fit
61
Configuring the PIP/PBP Settings
4
4 Configuring the PIP/PBP Settings
PBP
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button.
3In PBP mode (Size ), move the JOG button UP/DOWN to select Picture Size and then press
the JOG button.
The following screen will appear.
Auto: Display the picture according to the aspect ratio of the each screen input source.
Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input
source.
In PC mode
Select the image size
for each screen.
PIP/PBP
Return
PIP/PBP Mode
Size
Position
Sound Source
Source
Picture Size
Contrast
On
75/100
3LFWXUH6L]H
$SSO\
&DQFHO
Auto Auto
62
Configuring the PIP/PBP Settings
4
4 Configuring the PIP/PBP Settings
4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and
standard broadcasts.
16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
anything off.
The function may not be supported depending on the ports provided with the product.
Changing the screen size is available when the following conditions are satisfied.
A digital output device is connected using the HDMI/DP cable.
The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally
(Not every model can support all of these signals.).
This can only be set when the external input is connected through HDMI/DP and
PC/AV Mode is set to AV.
4Move to the desired option controlling the JOG button and press the JOG button.
5The selected option will be applied.
In AV mode
3LFWXUH6L]H
$SSO\
&DQFHO
16:9 Wide
63
Configuring the PIP/PBP Settings
4
4 Configuring the PIP/PBP Settings
4.1.7 Configuring Contrast
PIP
Adjust the contrast level for sub-screen.
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button.
3In PIP mode (Size / / ), move the JOG button UP/DOWN to select Contrast and then
press the JOG button.
The following screen will appear.
4Adjust the Contrast controlling the JOG button LEFT/RIGHT.
5The selected option will be applied.
Adjust the contrast
level for each screen.
PIP/PBP
Return
PIP/PBP Mode
Size
Position
Sound Source
Source
Picture Size
Contrast
On
75/75
75
64
Configuring the PIP/PBP Settings
4
4 Configuring the PIP/PBP Settings
PBP
Adjust the contrast level for each screen.
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button.
3In PBP mode (Size ), move the JOG button UP/DOWN to select Contrast and then press the
JOG button.
The following screen will appear.
4Adjust the Contrast controlling the JOG button LEFT/RIGHT.
5The selected option will be applied.
Adjust the contrast
level for each screen.
PIP/PBP
Return
PIP/PBP Mode
Size
Position
Sound Source
Source
Picture Size
Contrast
On
75/100
&RQWUDVW
65
5 Coordinating OSD
5 Coordinating OSD
A detailed description of each function is provided. Refer to your product for details.
5.1 Transparency
Set the transparency for the menu windows.
5.1.1 Changing Transparency
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to OnScreen Display controlling the JOG button UP/DOWN and press the JOG button.
3Move to Transparency controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
Configure the
transparency of the
menu windows.
Transparency
Language
Display Time
Off
On
OnScreen Display
Return
66
Coordinating OSD
5
5 Coordinating OSD
5.2 Language
Set the menu language.
A change to the language setting will only be applied to the onscreen menu display.
It will not be applied to other functions on your PC.
5.2.1 Configuring Language
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to OnScreen Display controlling the JOG button UP/DOWN and press the JOG button.
3Move to Language controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
Set the menu
language.
Transparency
Language
Display Time
Deutsch
English
Español
Français
Italiano
OnScreen Display
Return
67
Coordinating OSD
5
5 Coordinating OSD
5.3 Display Time
Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified
period of time.
Display Time can be used to specify the time after which you want the OSD menu to disappear.
5.3.1 Configuring Display Time
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to OnScreen Display controlling the JOG button UP/DOWN and press the JOG button.
3Move to Display Time controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
Set how long the menu
window will remain on
screen for when it is
not in use.
Transparency
Language
Display Time
5 sec
10 sec
20 sec
200 sec
OnScreen Display
On
Return
68
6 Setup and Reset
6 Setup and Reset
A detailed description of each function is provided. Refer to your product for details.
6.1 FreeSync
The functions available on the monitor may vary depending on the model. Refer to the actual
product.
FreeSync is a DisplayPort 1.2 function, so the choice of the DisplayPort Ver. 1.1 in OSD, or when
the access of HDMI signal, the FreeSync function is not available. Make sure to use a Samsung
DP cable. DP cables not supplied by Samsung may not be compatible with the product.
Not available when PIP/PBP Mode is set to On.
The sound quality of the monitor may decrease if FreeSync is enabled.
6.1.1 Configuring FreeSync
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to System controlling the JOG button UP/DOWN and press the JOG button.
3Move to FreeSync controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
U28E590D
Off: Disable FreeSync.
On: Enable the basic FreeSync functions of the AMD graphics card.
On
1.2
Auto
Acceleration
FreeSync technology
is solution that
eliminates screen
tearing without all the
usual lag and latency.
FreeSync can be
operated when you
use AMD's graphic
card with supporting
Freesync solution.
FreeSync
Eco Saving Plus
Off Timer
PC/AV Mode
DisplayPort Ver.
Source Detection
Key Repeat Time
System
Return
Off
On
69
Setup and Reset
6
6 Setup and Reset
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency.
FreeSync can be operated when you use AMD's graphic card with supporting FreeSync solution.
FreeSync is only supported by AMD graphics cards.
Select FreeSync Off if you are using a graphics card from a different manufacturer.
Please refer to the AMD's official website related situation.
Only a few of the following types of AMD graphics card can support FreeSync, and need to install the
AMD's latest official FreeSync driver.
Radeon R9 290X/290
Radeon R9 285
Radeon R7 260X/260
AMD A10 “Kaveri” APU (ex. A10 7850K)
For additional AMD graphics card models that support the FreeSync feature, visit the official AMD
website.
If the FreeSync function is enabled, the response rate during the game may fluctuate depending
on the resolution.
A higher resolution generally decreases the response rate.
If the FreeSync function is enabled, the screen can flicker depending on the game option settings.
Decreasing the game setting values might help to remove the flicker. Installing the latest drivers
from the AMD website may also fix this issue.
U24E590D
Off: Disable FreeSync.
Standard Engine: Enable the basic FreeSync functions of the AMD graphics card.
Ultimate Engine: Enable the FreeSync feature with a higher screen frame rate. Screen tearing
(abnormal sync between the screen and content) is reduced in this mode. Note that screen
flickering may occur during game play.
If the FreeSync function is enabled, the screen may flicker when you play games.
On
1.2
Auto
Acceleration
FreeSync technology
is solution that
eliminates screen
tearing without all the
usual lag and latency.
FreeSync can be
operated when you
use AMD's graphic
card with supporting
Freesync solution.
FreeSync
Eco Saving Plus
Off Timer
PC/AV Mode
DisplayPort Ver.
Source Detection
Key Repeat Time
System
Return
Off
Standard Engine
Ultimate Engine
70
Setup and Reset
6
6 Setup and Reset
Point the right mouse button, select the AMD Catalyst Control Center.
71
Setup and Reset
6
6 Setup and Reset
6.2 Eco Saving Plus
The Eco Saving Plus function reduces power consumption by controlling the electric current used by
the monitor panel.
This menu is not available when Bright is in Dynamic Contrast mode.
This menu is not available when Game Mode is enabled.
This menu is not available when Eye Saver Mode is enabled.
Not available when PIP/PBP Mode is set to On.
6.2.1 Configuring Eco Saving Plus
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to System controlling the JOG button UP/DOWN and press the JOG button.
3Move to Eco Saving Plus controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
Off: Deactivate the Eco Saving Plus function.
Auto: The power consumption will automatically be reduced by about 10% over the current
setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
Low: The power consumption will be reduced by 25% over the default setting.
High: The power consumption will be reduced by 50% over the default setting.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
SAMSUNG
MAGIC
Acceleration
Adjust the power
consumption of the
product to save energy.
FreeSync
Eco Saving Plus
Off Timer
PC/AV Mode
DisplayPort Ver.
Source Detection
Key Repeat Time
Off
Auto
Low
High
System
Return
72
Setup and Reset
6
6 Setup and Reset
6.3 Off Timer
You can set the product to automatically turn off.
6.3.1 Configuring Off Timer
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to System controlling the JOG button UP/DOWN and press the JOG button.
3Move to Off Timer controlling the JOG button UP/DOWN and press the JOG button.
4Move to Off Timer controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
Off: Deactivate the off timer so that the product does not power off automatically.
On: Activate the off timer so that the product powers off automatically.
5Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
6The selected option will be applied.
Off
Off
1.2
Auto
Acceleration
Enable or disable the
Off Timer.
FreeSync
Eco Saving Plus
Off Timer
PC/AV Mode
DisplayPort Ver.
Source Detection
Key Repeat Time
System
Return
Enable or disable the
Off Timer.
Off Timer
Turn Off After
Off
On
Off Timer
Return
73
Setup and Reset
6
6 Setup and Reset
6.3.2 Configuring Turn Off After
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to System controlling the JOG button UP/DOWN and press the JOG button.
3Move to Off Timer controlling the JOG button UP/DOWN and press the JOG button.
4Move to Turn Off After controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
5Adjust the Turn Off After controlling the JOG button LEFT/RIGHT.
6The selected option will be applied.
The off timer can be set within a range of 1 to 23 hours. The product will automatically power off
after the specified number of hours.
This option is only available when Off Timer is set to On.
For products for the market in some regions, the Off Timer is set to automatically activate 4 hours
after the product powers on. This is done in accordance with power supply regulations. If you do
not want the timer to activate, go to MENU System and set Off Timer to Off.
On
Set the monitor to
automatically turn off
after a certain time
period.
Off Timer
Turn Off After
Off Timer
Return
→
74
Setup and Reset
6
6 Setup and Reset
6.4 PC/AV Mode
Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie.
Supplied for the wide models only such as 16:9 or 16:10.
If the monitor (when set to HDMI 1, HDMI 2 or DisplayPort) is in power saving mode or is
displaying the message Check Signal Cable, press the MENU button to display the On Screen
Display(OSD). You can select PC or AV.
6.4.1 Configuring PC/AV Mode
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to System controlling the JOG button UP/DOWN and press the JOG button.
3Move to PC/AV Mode controlling the JOG button UP/DOWN and press the JOG button.
4Move to the HDMI 1, HDMI 2 or DisplayPort controlling the JOG button UP/DOWN and press the
JOG button.
The following screen will appear.
5Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
6The selected option will be applied.
Off
Off
1.2
Auto
Acceleration
Set to AV to enlarge
the picture.
FreeSync
Eco Saving Plus
Off Timer
PC/AV Mode
DisplayPort Ver.
Source Detection
Key Repeat Time
System
Return
Select the PC/AV mode
for the HDMI 1 source.
DisplayPort
HDMI 1
HDMI 2
PC/AV Mode
Return
PC
AV
75
Setup and Reset
6
6 Setup and Reset
6.5 DisplayPort Ver.
Select your Displayport. Displayport 1.1 supports High Bit Rate 1, while 1.2 supports High Bit Rate 2.
Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
If the monitor (when set to HDMI 1, HDMI 2 or DisplayPort) is in power saving mode or is
displaying the message Check Signal Cable, press the [ ] button to display the On Screen
Display (OSD). You can select 1.1 or 1.2.
If you select 1.1, the maximum resolution of your screen drops to 2560 x 1440 due to the
limitations in HBR1 transmission speeds.
6.5.1 Configuring DisplayPort Ver.
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to System controlling the JOG button UP/DOWN and press the JOG button.
3Move to DisplayPort Ver. controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
1.1 / 1.2
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
Off
Off
Auto
Select your
Displayport.
Displayport 1.1
supports HBR 1,
while 1.2 supports
HBR 2.
FreeSync
Eco Saving Plus
Off Timer
PC/AV Mode
DisplayPort Ver.
Source Detection
Key Repeat Time
System
Return
1.1
1.2
76
Setup and Reset
6
6 Setup and Reset
6.6 Source Detection
You can activate Source Detection.
Not available when PIP/PBP Mode is set to On.
6.6.1 Configuring Source Detection
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to System controlling the JOG button UP/DOWN and press the JOG button.
3Move to Source Detection controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
Auto: The input source is automatically recognized.
Manual: Manually select an input source.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
Off
Off
1.2
Auto
Decide how input
sources will be
detected.
FreeSync
Eco Saving Plus
Off Timer
PC/AV Mode
DisplayPort Ver.
Source Detection
Key Repeat Time
System
Return
Auto
Manual
77
Setup and Reset
6
6 Setup and Reset
6.7 Key Repeat Time
Control the response rate of a button when the button is pressed.
6.7.1 Configuring Key Repeat Time
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to System controlling the JOG button UP/DOWN and press the JOG button.
3Move to Key Repeat Time controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds
only once when a button is pressed.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
Off
Off
1.2
Auto
Acceleration
Configure the
response rate of a
button when the button
is pressed.
FreeSync
Eco Saving Plus
Off Timer
PC/AV Mode
DisplayPort Ver.
Source Detection
Key Repeat Time
System
Return
Acceleration
1 sec
2 sec
No Repeat
78
Setup and Reset
6
6 Setup and Reset
6.8 Power LED On
Configure the settings to enable or disable the power LED located at the lower part of the product.
6.8.1 Configuring Power LED On
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to System controlling the JOG button UP/DOWN and press the JOG button.
3Move to Power LED On controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
Working: The power LED is on when the product is turned on.
Stand-by: The power LED is on when the product is turned off.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
Stand-by
Set the status of the
power LED.
Power LED On
Reset All
System
Return
Working
Stand-by
79
Setup and Reset
6
6 Setup and Reset
6.9 Reset All
Return all the settings for the product to the default factory settings.
6.9.1 Initializing Settings (Reset All)
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to System controlling the JOG button UP/DOWN and press the JOG button.
3Move to Reset All controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
4Move to the desired option controlling the JOG button LEFT/RIGHT and press the JOG button.
5The selected option will be applied.
Return all the settings
for the product to the
default factory settings.
Power LED On
Reset All
Stand-by
System
Return
$OOWKHPHQXVHWWLQJVZLOOEHUHVHW
WRGHIDXOW
$UH\RXVXUH\RXZDQWWRUHVHW"
<HV 1R
80
7 Information Menu and Others
7 Information Menu and Others
A detailed description of each function is provided. Refer to your product for details.
7.1 Information
View the current input source, frequency and resolution.
7.1.1 Displaying Information
1When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2Move to Information controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
PBP
PIP
Information
Picture
PIP/PBP
OnScreen Display
System
Information
HDMI 1
**** x ****
**kHz **Hz
LU********/**
S/N:**************
Exit
Information
Picture
PIP/PBP
OnScreen Display
System
Information
Exit
HDMI 1
**** x ****
**kHz **Hz
HDMI 2
**** x ****
**kHz **Hz
LU********/**
S/N:**************
Information
Picture
PIP/PBP
OnScreen Display
System
Information
Exit
HDMI 1
**** x ****
**kHz **Hz
HDMI 2
**** x ****
**kHz **Hz
LU********/**
S/N:**************
81
Information Menu and Others
7
7 Information Menu and Others
7.2 Configuring Eye Saver Mode, Brightness, and Contrast
from the Initial Screen
Adjust the Brightness, Contrast and Eye Saver Mode by moving the JOG button.
Eye Saver Mode
Not available when PIP/PBP Mode is set to On.
Brightness
This menu is not available when Bright is set to Dynamic Contrast mode.
This menu is not available when Eco Saving Plus is enabled.
This menu is not available when Eye Saver Mode is enabled.
Contrast
This option is not available when Bright is in Cinema or Dynamic Contrast mode.
This menu is not available when Game Mode is enabled.
This menu is not available when PIP/PBP Mode is set to On and the Size is set to
(PBP Mode).
1When you control the JOG button UP/DOWN, the following screen will appear.
The following screen will appear.
2Move the JOG button UP/DOWN to select Brightness, Contrast or Eye Saver Mode.
3Move the JOG button LEFT/RIGHT to adjust the Brightness, Contrast or Eye Saver Mode setting.
The default brightness can vary depending on the region.
SAMSUNG
MAGIC
SAMSUNG
MAGIC
Eye Saver Mode
Brightness
Contrast
Off
82
Information Menu and Others
7
7 Information Menu and Others
7.3 Configuring Volume in the Initial Screen
7.3.1 Volume
Adjust the Volume by moving the JOG button when the Direct Key Guide is displayed on the screen.
1When you control the JOG button LEFT/RIGHT, the following screen will appear.
2Adjust the Volume controlling the JOG button LEFT/RIGHT.
Move the JOG button down to enable Mute. The following screen will appear on the product.
Mute is disabled when you adjust the monitor volume by moving the JOG button left or right.
Mute can also be disabled when the monitor turns on or power-saving mode activates.
If the audio quality of a connected input device is poor, the Auto Mute function on the product may
mute the sound or cause choppy audio when applying the headphones or speakers.
Set the input volume for the input device to at least 20% and control the volume using the volume
control (JOG button LEFT/RIGHT) on the product.
What is Auto Mute?
The function mutes the audio to improve sound effect when there is sound noise or when the
input signal is weak, usually due to a problem with the volume of an input device.
To activate the Mute function, access the Volume control screen, then use the JOG button to
move the focus down.
To deactivate the Mute function, access the Volume control screen, then increase or decrease the
Volume.
Volume
Mute
50
83
8 Installing the Software
8 Installing the Software
8.1 Easy Setting Box
"Easy Setting Box" enables users to use the monitor by partitioning multiple sections.
8.1.1 Installing the Software
1Insert the installation CD into the CD-ROM drive.
2Select the "Easy Setting Box" setup program.
If the pop-up screen for the software installation does not appear on the main screen, find and
double-click the "Easy Setting Box" setup file on the CD-ROM.
3When the Installation Wizard appears, click Next.
4Follow the instructions given on the screen to proceed with installation.
The software may not work properly if you do not restart the computer after the installation.
The "Easy Setting Box" icon may not appear depending on the computer system and the
product specifications.
If the shortcut icon does not appear, press the F5 key.
Restrictions and Problems with the Installation ("Easy Setting Box")
The "Easy Setting Box" installation may be affected by the Graphics Card, Motherboard and the
Networking Environment.
System Requirements
OS
Windows XP 32Bit/64Bit
Windows Vista 32Bit/64Bit
Windows 7 32Bit/64Bit
Windows 8 32Bit/64Bit
Hardware
At least 32MB of memory
At least 60MB of free space on the hard disk drive
Easy Setting Box
84
Installing the Software
8
8 Installing the Software
8.1.2 Removing the Software
Click Start, select Settings/Control Panel, and then double-click Add or Remove Programs.
Select "Easy Setting Box" from the program list and click the Add/Delete button.
85
9 Troubleshooting Guide
9 Troubleshooting Guide
9.1 Requirements Before Contacting Samsung Customer
Service Center
9.1.1 Testing the Product
Before calling Samsung Customer Service Center, test your product as follows. If the problem persists,
contact Samsung Customer Service Center.
Check if your product is operating normally by using the product test function.
If the screen is turned off and the power indicator blinks even though the product is properly connected
to a PC, perform a self-diagnosis test.
1Power off both the PC and product.
2Disconnect the cables from the product.
3Power on the product.
4If the message Check Signal Cable appears, the product is working normally.
If the screen remains blank, check the PC system, video controller and cable.
9.1.2 Checking the Resolution and Frequency
For a mode that exceeds the supported resolution (refer to "10.3 Standard Signal Mode Table"), the
message Not Optimum Mode will appear for a short time.
9.1.3 Check the following.
Installation issue (PC mode)
Issues Solutions
The screen keeps switching on and off. Check the cable connection between the product
and PC, and ensure the connectors are locked.
(Refer to "2.2 Connecting and Using a PC")
86
Troubleshooting Guide
9
9 Troubleshooting Guide
Screen issue
Issues Solutions
The power LED is off. The screen will not switch
on.
Check that the power cable is connected
properly.
(Refer to "2.2 Connecting and Using a PC")
The message Check Signal Cable appears. Check that the cable is properly connected to the
product.
(Refer to "2.2 Connecting and Using a PC")
Check that the device connected to the product is
powered on.
Not Optimum Mode is displayed. This message appears when the signal from the
graphics card exceeds the maximum resolution or
frequency for the product.
Change the maximum resolution and frequency to
suit the product performance, referring to
Standard Signal Mode Table (page 92).
The images on the screen look distorted. Check the cable connection to the product.
(Refer to "2.2 Connecting and Using a PC")
The screen appears unstable and shaky. Check that the resolution and frequency for the
PC are within the range of resolution and
frequency compatible with the product.
Next, if required, change the settings, referring to
Standard Signal Mode Table (page 92) in this
manual and the Information menu on the
product.
There are shadows or ghost images left on the
screen.
The screen is too bright. The screen is too dark. Adjust Brightness (page 38) and
Contrast (page 39).
Screen color is inconsistent. Change the Color settings.
(Refer to "3.5 Color")
The colors on the screen have a shadow and are
distorted.
Change the Color settings.
(Refer to "3.5 Color")
White does not really look white. Change the Color settings.
(Refer to "3.5 Color")
There is no image on the screen and the power
LED blinks every 0.5 to 1 second.
The product is operating in power-saving mode.
Press any key on the keyboard or move the
mouse to return to normal operating mode.
87
Troubleshooting Guide
9
9 Troubleshooting Guide
Sound issue
Source device issue
The LED lights on the frame of the product may be seen depending on the user's viewing angle.
The light is harmless to people and has no bearing on product features and performance. The product
is safe to use.
Issues Solutions
There is no sound. Check the connection of the audio cable or adjust
the volume.
Check the volume.
The volume is too low. Adjust the volume.
If the volume is still low after turning it up to the
maximum level, adjust the volume on your PC
sound card or software program.
Issues Solutions
A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is
booting, have your PC serviced.
88
Troubleshooting Guide
9
9 Troubleshooting Guide
9.2 Q & A
Question Answer
How can I change the
frequency?
Set the frequency on your graphics card.
Windows XP: Go to Control Panel
Appearance and Themes Display Settings
Advanced Monitor, and adjust Refresh rate under
Monitor settings.
Windows ME/2000: Go to Control Panel Display
Settings Advanced Monitor, and adjust Refresh rate
under Monitor settings.
Windows Vista: Go to Control Panel
Appearance and Personalization Personalization
Display Settings Advanced Settings Monitor, and
adjust Refresh rate under Monitor settings.
Windows 7: Go to Control Panel
Appearance and Personalization Display
Screen Resolution Advanced settings Monitor, and
adjust Refresh rate under Monitor settings.
Windows 8: Go to Settings Control Panel
Appearance and Personalization Display
Screen Resolution Advanced settings Monitor, and
adjust Refresh rate under Monitor settings.
Windows 10: Go to
Settings
System
Display
Advanced display settings
Display adapter properties
Monitor
, and adjust
Screen refresh rate
under
Monitor settings
.
89
Troubleshooting Guide
9
9 Troubleshooting Guide
Refer to the user manual for your PC or graphics card for further instructions on adjustment.
How can I change the
resolution?
Windows XP: Go to Control Panel
Appearance and Themes Display Settings, and adjust
the resolution.
Windows ME/2000: Go to Control Panel Display
Settings, and adjust the resolution.
Windows Vista: Go to Control Panel
Appearance and Personalization Personalize
Display Settings, and adjust the resolution.
Windows 7: Go to Control Panel
Appearance and Personalization Display
Adjust Resolution, and adjust the resolution.
Windows 8: Go to Settings Control Panel
Appearance and Personalization Display
Adjust Resolution, and adjust the resolution.
Windows 10: Go to Settings System Display
Advanced display settings, and adjust the resolution.
How do I set power-saving
mode?
Windows XP: Set power-saving mode in Control Panel
Appearance and Themes Display Screen Saver
Settings Power options or BIOS SETUP on the PC.
Windows ME/2000: Set power-saving mode in
Control Panel Display Screen Saver Settings
Power options or BIOS SETUP on the PC.
Windows Vista: Set power-saving mode in Control Panel
Appearance and Personalization Personalize
Screen Saver Settings Power options or BIOS SETUP on
the PC.
Windows 7: Set power-saving mode in Control Panel
Appearance and Personalization Personalize
Screen Saver Settings Power options or BIOS SETUP on
the PC.
Windows 8: Set power-saving mode in Settings
Control Panel Appearance and Personalization
Personalize Screen Saver Settings Power options or
BIOS SETUP on the PC.
Windows 10: Set power-saving mode in Settings
Personalization Lock screen Screen timeout settings
Power & sleep or BIOS SETUP on the PC.
Question Answer
90
10 Specifications
10 Specifications
10.1 General
Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems.
Two-way data exchange between the monitor and PC system optimizes the monitor settings.
Monitor installation takes place automatically. However, you can customize the installation settings if desired.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm)
may be brighter or darker on the LCD panel. This does not affect product performance.
The above specifications are subject to change without notice to improve quality.
This device is a Class B digital apparatus.
Model Name U28E590D U24E590D
Panel Size 28 Inches (70 cm) 23.5 Inches (59 cm)
Display
area
620.93 mm (H) x 341.28 mm (V)
24.4 Inches (H) x 13.4 Inches (V)
521.28 mm (H) x 293.22 mm (V)
20.5 Inches (H) x 11.5 Inches (V)
Pixel Pitch 0.16 mm (H) x 0.16 mm (V)
0.006299 Inches (H) x
0.006299 Inches (V)
0.4525 mm (H) x 0.13575 mm (V)
0.017815 Inches (H) x
0.005344 Inches (V)
Power Supply AC 100 - 240 V ~ (+/- 10 %), 50/60 Hz ± 3 Hz
Refer to the label at the back of the product as the standard
voltage can vary in different countries.
Dimensions
(W x H x D) /
Weight
Without
Stand
660.9 x 381.3 x 73.5 mm
26.0 x 15.0 x 2.9 Inches
561.1 x 333.0 x 62.8 mm
22.1 x 13.1 x 2.5 Inches
With
Stand
660.9 x 468.5 x 187.1 mm / 5.28 kg
26.0 x 18.4 x 7.4 Inches / 11.6 lbs
561.1 x 428.0 x 187.1 mm / 4.61 kg
22.1 x 16.9 x 7.4 Inches / 10.2 lbs
VESA Mounting Interface 75 mm x 75 mm
3.0 Inches x 3.0 Inches
(For use with Specialty(Arm) Mounting hardware.)
Environmental
considerations
Operating Temperature : 50 °F – 104 °F (10 °C – 40 °C)
Humidity : 10 % – 80 %, non-condensing
Storage Temperature : -4 °F – 113 °F (-20 °C – 45 °C)
Humidity : 5 % – 95 %, non-condensing
(USA only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
91
Specifications
10
10 Specifications
10.2 PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and
changing the color of the power LED if the product is not used for a specified period of time. The power
is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or
move the mouse. Power-saving mode functions only when the product is connected to a PC that has a
power-saving function.
The power consumption level can vary in different operating conditions or when settings are
changed.
ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
Energy Star power is measured with the test method in the current Energy Star® Standard.
To reduce the power consumption to 0, disconnect the power cord. Be sure to disconnect the
power cable when you will not be using the product for an extended period of time. To reduce the
power consumption to 0 watts when the power switch is not available, disconnect the power
cable.
PowerSaver Energy Star Test
Condition Power saving mode Power off
(Power button)
Power Indicator Off Blinking On
Power Consumption
(U28E590D) Typical 29.6 W Typical 0.3 W Less than 0.3 W
Power Consumption
(U24E590D) Typical 34.3 W Typical 0.3 W Less than 0.3 W
92
Specifications
10
10 Specifications
10.3 Standard Signal Mode Table
This product can be set to only one resolution for each screen size to obtain the optimum picture
quality due to the nature of the panel. Therefore, a resolution other than the specified resolution
may degrade the picture quality. To avoid this, it is recommended that you select the optimum
resolution specified for the screen size of your product.
Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT
monitor before you exchange it with the LCD monitor.
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will
automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank even though the power LED turns on. In such a case, change the
settings according to the following table by referring to the graphics card user manual.
Model Name U28E590D / U24E590D
Synchronization Horizontal Frequency 30 – 135 kHz (DisplayPort)
30 – 90 kHz (HDMI1)
30 – 135 kHz (HDMI2)
Vertical Frequency 56 – 75 Hz (DisplayPort)
24 – 75 Hz (HDMI1/HDMI2)
Resolution Optimum Resolution 3840 x 2160 @ 60 Hz (DisplayPort)
3840 x 2160 @ 30 Hz (HDMI1)
3840 x 2160 @ 60 Hz (HDMI2)
Maximum Resolution 3840 x 2160 @ 60 Hz (DisplayPort)
3840 x 2160 @ 30 Hz (HDMI1)
3840 x 2160 @ 60 Hz (HDMI2)
93
Specifications
10
10 Specifications
Displayport
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400 31.469 70.087 28.322 -/+
VESA, 640 x 480 31.469 59.940 25.175 -/-
MAC, 640 x 480 35.000 66.667 30.240 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
VESA, 640 x 480 37.500 75.000 31.500 -/-
VESA, 800 x 600 35.156 56.250 36.000 +/+
VESA, 800 x 600 37.879 60.317 40.000 +/+
VESA, 800 x 600 48.077 72.188 50.000 +/+
VESA, 800 x 600 46.875 75.000 49.500 +/+
MAC, 832 x 624 49.726 74.551 57.284 -/-
VESA, 1024 x 768 48.363 60.004 65.000 -/-
VESA, 1024 x 768 56.476 70.069 75.000 -/-
VESA, 1024 x 768 60.023 75.029 78.750 +/+
VESA, 1152 x 864 67.500 75.000 108.000 +/+
MAC, 1152 x 870 68.681 75.062 100.000 -/-
VESA, 1280 x 720 45.000 60.000 74.250 +/+
VESA, 1280 x 800 49.702 59.810 83.500 -/+
VESA, 1280 x 1024 63.981 60.020 108.000 +/+
VESA, 1280 x 1024 79.976 75.025 135.000 +/+
VESA, 1440 x 900 55.935 59.887 106.500 -/+
VESA, 1600 x 900RB 60.000 60.000 108.000 +/+
VESA, 1680 x 1050 65.290 59.954 146.250 -/+
VESA, 1920 x 1080 67.500 60.000 148.500 +/+
VESA, 2560 x 1440 88.787 59.951 241.500 +/-
VESA, 3840 x 2160RB 133.313 59.997 533.250 +/-
94
Specifications
10
10 Specifications
HDMI1
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400 31.469 70.087 28.322 -/+
VESA, 640 x 480 31.469 59.940 25.175 -/-
MAC, 640 x 480 35.000 66.667 30.240 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
VESA, 640 x 480 37.500 75.000 31.500 -/-
VESA, 800 x 600 35.156 56.250 36.000 +/+
VESA, 800 x 600 37.879 60.317 40.000 +/+
VESA, 800 x 600 48.077 72.188 50.000 +/+
VESA, 800 x 600 46.875 75.000 49.500 +/+
MAC, 832 x 624 49.726 74.551 57.284 -/-
VESA, 1024 x 768 48.363 60.004 65.000 -/-
VESA, 1024 x 768 56.476 70.069 75.000 -/-
VESA, 1024 x 768 60.023 75.029 78.750 +/+
VESA, 1152 x 864 67.500 75.000 108.000 +/+
MAC, 1152 x 870 68.681 75.062 100.000 -/-
VESA, 1280 x 720 45.000 60.000 74.250 +/+
VESA, 1280 x 800 49.702 59.810 83.500 -/+
VESA, 1280 x 1024 63.981 60.020 108.000 +/+
VESA, 1280 x 1024 79.976 75.025 135.000 +/+
VESA, 1440 x 900 55.935 59.887 106.500 -/+
VESA, 1600 x 900RB 60.000 60.000 108.000 +/+
VESA, 1680 x 1050 65.290 59.954 146.250 -/+
VESA, 1920 x 1080 67.500 60.000 148.500 +/+
VESA, 2560 x 1440 88.787 59.951 241.500 +/-
VESA, 3840 x 2160 67.500 30.000 297.000 +/+
95
Specifications
10
10 Specifications
HDMI2
Horizontal Frequency
The time required to scan a single line from the left to the right side of the screen is called a
horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency.
Horizontal frequency is measured in kHz.
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400 31.469 70.087 28.322 -/+
VESA, 640 x 480 31.469 59.940 25.175 -/-
MAC, 640 x 480 35.000 66.667 30.240 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
VESA, 640 x 480 37.500 75.000 31.500 -/-
VESA, 800 x 600 35.156 56.250 36.000 +/+
VESA, 800 x 600 37.879 60.317 40.000 +/+
VESA, 800 x 600 48.077 72.188 50.000 +/+
VESA, 800 x 600 46.875 75.000 49.500 +/+
MAC, 832 x 624 49.726 74.551 57.284 -/-
VESA, 1024 x 768 48.363 60.004 65.000 -/-
VESA, 1024 x 768 56.476 70.069 75.000 -/-
VESA, 1024 x 768 60.023 75.029 78.750 +/+
VESA, 1152 x 864 67.500 75.000 108.000 +/+
MAC, 1152 x 870 68.681 75.062 100.000 -/-
VESA, 1280 x 720 45.000 60.000 74.250 +/+
VESA, 1280 x 800 49.702 59.810 83.500 -/+
VESA, 1280 x 1024 63.981 60.020 108.000 +/+
VESA, 1280 x 1024 79.976 75.025 135.000 +/+
VESA, 1440 x 900 55.935 59.887 106.500 -/+
VESA, 1600 x 900RB 60.000 60.000 108.000 +/+
VESA, 1680 x 1050 65.290 59.954 146.250 -/+
VESA, 1920 x 1080 67.500 60.000 148.500 +/+
VESA, 2560 x 1440 88.787 59.951 241.500 +/-
VESA, 3840 x 2160RB 133.313 59.997 533.250 +/-
96
Specifications
10
10 Specifications
Vertical Frequency
Repeating the same picture dozens of times per second allows you to view natural pictures. The
repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz.
Some resolutions listed in the table above may not be available depending on graphics card
specifications.
97
Appendix
Appendix
Responsibility for the Pay Service (Cost to Customers)
When the service is requested, in spite of in warranty, we may charge you for a visit from a service
technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
If a service technician gives instructions on how to use product or simply adjusts options without
disassembling product.
If a defect is caused by external environmental factors. (Internet, Antenna, Wired Signal, etc.)
If a product is reinstalled or devices are connected additionally after installing the purchased product
for the first time.
If a product is reinstalled to move to a different spot or to move to a different house.
If customer requests instructions on how to use because of another company's product.
If customer requests instructions on how to use the network or another company's program.
If customer requests software installation and setup for the product.
If a service technician removes/cleans dusts or foreign materials inside of the product.
If customer requests an installation additionally after purchasing a product through home-shopping
or online.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
external impact or drop.
use of supplies or separately sold product unspecified by Samsung.
repair from a person besides an engineer of outsourcing service company or partner of Samsung
Electronics Co., Ltd.
remodeling or repairing the product by customer.
using it with incorrect voltage or non-authorised electrical connections.
not following the "cautions" in User Manual.
Others
If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)
If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head, Vibrator,
Lamp, Filter, Ribbon, etc.)
If customer requests a service in case the product has no defect, service fee may be charged. So
please read User Manual first.
98
Appendix
Appendix
Correct Disposal
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its
electronic accessories (e.g. charger, headset, USB cable) should not be disposed of
with other household waste at the end of their working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take these items
for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with
other commercial wastes for disposal.
99
Appendix
Appendix
Terminology
OSD (On Screen Display)
On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as
required. You can change the screen brightness, tint, size and many other settings using menus
displayed on the screen.
Gamma
The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the
brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
Grey scale
Scale refers to levels of color intensity that show variations of color change from darker areas to
brighter areas on the screen. Changes to the screen brightness are expressed with black and white
variation, and grey scale refers to the medium area between black and white. Changing the grey scale
through Gamma adjustment will change the medium brightness on the screen.
Scanning rate
Scanning rate, or refresh rate, refers to the frequency of screen refreshes. Screen data is transmitted
as it refreshes to display an image, although the refreshing is invisible to the naked eye. The number of
screen refreshes is called scanning rate and is measured in Hz. A scanning rate of 60Hz means that
the screen refreshes 60 times per second. The screen scanning rate depends on the performance of
the graphics cards in your PC and monitor.
Horizontal Frequency
Characters or images displayed on the monitor screen consist of numerous dots (pixels). Pixels are
transmitted in horizontal lines, which are then arranged vertically to create an image. The horizontal
frequency is measured in kHz and represents how many times horizontal lines per second are
transmitted and displayed on the monitor screen. A horizontal frequency of 85 means that the
horizontal lines that make up an image are transmitted 85000 times per second. The horizontal
frequency is indicated in 85kHz.
Vertical Frequency
One image is made of numerous horizontal lines. The vertical frequency is measured in Hz and
represents how many images can be created per second by those horizontal lines. A vertical
frequency of 60 means that an image is transmitted 60 times per second. The vertical frequency is
also called "refresh rate" and affects screen flicker.
100
Appendix
Appendix
Resolution
Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the
level of display detail.
A higher resolution displays a greater amount of information on the screen and is suitable for
performing multiple tasks at the same time.
E.g. A resolution of 1920 x 1080 consists of 1920 horizontal pixels (horizontal resolution) and 1080
vertical lines (vertical resolution).
E.g. A resolution of 1920 x 1200 consists of 1920 horizontal pixels (horizontal resolution) and 1200
vertical lines (vertical resolution).
Plug & Play
The Plug & Play feature allows the automatic exchange of information between a monitor and PC to
produce an optimum display environment.
The monitor uses VESA DDC (international standard) to execute Plug & Play.
Index 101
Index
B
Before Connecting 29
Brightness 38
C
Checking the Contents 19
Cleaning 8
Connecting and Using a PC 29
Contrast 39
Copyright 7
Correct Disposal 98
Correct posture to use the product 18
D
Display Time 67
DisplayPort Ver. 75
E
Easy Setting Box 83
Eco Saving Plus 71
Eye Saver Mode 46
F
FreeSync 68
G
Game Mode 47
General 90
H
HDMI Black Level 45
I
INFORMATION 80
Installation 25
K
Key Repeat Time 77
L
Language 66
O
Off Timer 72
P
Parts 20
Picture Size 49
Power LED On 78
PowerSaver 91
Q
Q & A 88
R
Requirements Before Contacting Samsung
Customer Service Center 85
Reset All 79
Response Time 48
Responsibility for the Pay Service (Cost to
Customers) 97
S
Safety Precautions 10
SAMSUNG MAGIC Angle 43
SAMSUNG MAGIC Bright 36
Screen Adjustment 51
Sharpness 40
Source Detection 76
