Table of Contents
- Safety Information
- Getting Started
- Connections
- Settings
- Media Play
- Network Services
- Appendix
Samsung UBD-K8500 User Manual
Displayed below is the user manual for UBD-K8500 by Samsung which is a product in the DVD/Blu-Ray Players category. This manual has pages.
Related Manuals
USER MANUAL
UBD-K8500
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at
www.samsung.com/register
2 English
Safety Information
Class II product : This symbol
indicates that it does not require
a safety connection to electrical
earth (ground).
AC voltage : This symbol
indicates that the rated voltage
marked with the symbol is AC
voltage.
DC voltage : This symbol
indicates that the rated voltage
marked with the symbol is DC
voltage.
Caution, Consult instructions
for use : This symbol instructs
the user to consult the user
manual for further safety related
information.
• The slots and openings in the cabinet and in
the back or bottom are provided for necessary
ventilation. To ensure reliable operation of this
apparatus, and to protect it from overheating,
these slots and openings must never be
blocked or covered.
- Do not place this apparatus in a confined
space, such as a bookcase, or built-in
cabinet, unless proper ventilation is provided.
- Do not place this apparatus near or over a
radiator or heat register, or where it is exposed
to direct sunlight.
- Do not place vessels (vases etc.) containing
water on this apparatus. A water spill can
cause a fire or electric shock.
• Do not expose this apparatus to rain or place it
near water (near a bathtub, washbowl, kitchen
sink, or pool, etc.). If this apparatus accidentally
gets wet, unplug it and contact an authorised
dealer immediately.
• This apparatus uses batteries. In your
community, there might be environmental
regulations that require you to dispose of these
batteries properly. Please contact your local
authorities for disposal or recycling information.
• Do not overload wall outlets, extension cords or
adaptors beyond their capacity, since this can
result in fire or electric shock.
• Route power-supply cords so that they are
not likely to be walked on or pinched by items
placed on or against them. Pay particular
attention to cords at the plug end, at wall
outlets, and the point where they exit from the
apparatus.
• To protect this apparatus from a lightning storm,
or when it is left unattended and unused for
long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system. This will prevent damage to the set due
to lightning and power line surges.
Warning
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE THE COVER (OR BACK). THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is
present inside. It is dangerous to make any
kind of contact with any internal part of this
product.
This symbol indicates that important
literature concerning operation and
maintenance has been included with this
product.
3 English
01 Safety Information
• Before connecting the AC power cord to the
DC adaptor outlet, make sure the voltage
designation of the DC adaptor corresponds to
the local electrical supply.
• Never insert anything metallic into the open
parts of this apparatus. Doing so may create a
danger of electric shock.
• To avoid electric shock, never touch the inside
of this apparatus. Only a qualified technician
should open this apparatus.
• Make sure to plug the power cord in until it is
firmly seated. When unplugging the power cord
from a wall outlet, always pull on the power
cord's plug. Never unplug by pulling on the
power cord. Do not touch the power cord with
wet hands.
• If this apparatus does not operate normally -
in particular, if there are any unusual sounds or
smells coming from it - unplug it immediately
and contact an authorised dealer or service
Centre.
• Maintenance of Cabinet.
- Before connecting other components to this
product, be sure to turn them off.
- If you move your product suddenly from a
cold place to a warm place, condensation
may occur on the operating parts and lens
and cause abnormal disc playback. If this
occurs, unplug the product, wait for two
hours, and then connect the plug to the
power outlet. Then, insert the disc, and try to
play back again.
• Be sure to pull the power plug out of the outlet
if the product is to remain unused or if you are
leaving the house for an extended period of time
(especially when children, elderly, or disabled
people will be left alone in the house).
- Accumulated dust can cause an electric
shock, an electric leakage, or a fire by causing
the power cord to generate sparks and heat
or the insulation to deteriorate.
• Contact an authorised service Centre for
information if you intend to install your
product in a location with heavy dust, high
or low temperatures, high humidity, chemical
substances, or where it will operate 24 hours
a day such as in an airport, a train station, etc.
Failing to do so may lead to serious damage of
your product.
• Use only a properly grounded plug and wall
outlet.
- An improper ground may cause electric shock
or equipment damage. (Class 1 Equipment
only.)
• To turn this apparatus off completely, you must
disconnect it from the wall outlet. Consequently,
the wall outlet and power plug must be readily
accessible at all times.
• Do not allow children to hang on the product.
• Store the accessories (battery, etc.) in a location
safely out of the reach of children.
• Do not install the product in an unstable location
such as a shaky self, a slanted floor, or a
location exposed to vibration.
• Do not drop or strike the product. If the product
is damaged, disconnect the power cord and
contact a service Centre.
• To clean this apparatus, unplug the power cord
from the wall outlet and wipe the product using
a soft, dry cloth. Do not use any chemicals such
as wax, benzene, alcohol, thinners, insecticide,
air fresheners, lubricants, or detergent. These
chemicals can damage the appearance of the
product or erase the printing on the product.
• Do not expose this apparatus to dripping or
splashing. Do not put objects filled with liquids,
such as vases on the apparatus.
• Do not dispose of batteries in a fire.
• Do not plug multiple electric devices into the
same wall socket. Overloading a socket can
cause it to overheat, resulting in a fire.
4 English
Safety Information
• There is danger of an explosion if you replace
the batteries used in the remote with the wrong
type of battery. Replace only with the same or
equivalent type.
• WARNING - TO PREVENT THE
SPREAD OF FIRE, KEEP CANDLES
AND OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
• WARNING
- To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture.
CLASS 1 LASER product
This Compact Disc player is classified as a CLASS
1 LASER product. Use of controls, adjustments
or performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
CAUTION :
• THIS PRODUCT USES AN INVISIBLE LASER
BEAM WHICH CAN CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED. BE
SURE TO OPERATE PRODUCT CORRECTLY
AS INSTRUCTED.
• THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVERS AND DO
NOT REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
This product satisfies CE regulations when
shielded cables and connectors are used to
connect the unit to other equipment. To prevent
electromagnetic interference with electric
appliances, such as radios and televisions, use
shielded cables and connectors for connections.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1
| NOTE |
\If the Region number of an Ultra HD Blu-ray
Disc/Blu-ray Disc/DVD does not correspond to
the Region number of this product, the product
cannot play the disc.
IMPORTANT NOTE
The mains lead on this equipment is supplied with
a molded plug incorporating a fuse. The value of
the fuse is indicated on the pin face of the plug.
If it requires replacing, a fuse approved to BS1362
of the same rating must be used.
Never use the plug with the fuse cover omitted
if the cover is detachable. If a replacement fuse
cover is required, it must be of the same colour as
the pin face of the plug. Replacement covers are
available from your dealer.
If the fitted plug is not suitable for the power points
in your house or the cable is not long enough to
reach a power point, you should obtain a suitable
safety approved extension lead or consult your
dealer for assistance.
However, if there is no alternative to cutting off the
plug, remove the fuse and then safely dispose of
the plug. Do not connect the plug to a mains jack,
as there is a risk of shock hazard from the bared
flexible cord.
To disconnect the apparatus from the mains, the
plug must be pulled out from the mains socket,
therefore the mains plug shall be readily operable.
The product unit accompanying this user manual
is licenced under certain intellectual property rights
of certain third parties.
5 English
01 Safety Information
Precautions
Important Safety Instructions
Read these operating instructions carefully before
using the unit. Follow all the safety instructions
listed below.
Keep these operating instructions handy for future
reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including AV receivers) that
produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where it exits the
apparatus.
11. Only use attachments/accessories specified
by the manufacturer.
12. Use only with the cart,
stand, tripod, bracket,
or table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or plug
is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Using the 3D function
IMPORTANT HEALTH AND SAFETY INFORMATION
FOR 3D PICTURES.
Read and understand the following safety
information before using the 3D function.
• Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea, and
headaches.
If you experience any such symptom, stop
viewing 3D TV, remove the 3D Active Glasses,
and rest.
• Watching 3D images for an extended period of
time may cause eye strain. If you feel eye strain,
stop viewing 3D TV, remove your 3D Active
Glasses, and rest.
• A responsible adult should frequently check on
children who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing
3D TV and rest.
• Do not use the 3D Active Glasses for other
purposes (such as general eyeglasses,
sunglasses, protective goggles, etc.).
6 English
Safety Information
• Do not use the 3D function or 3D Active Glasses
while walking or moving around. Using the 3D
function or 3D Active Glasses while moving
around may cause you to bump into objects,
trip, and/or fall, and cause serious injury.
• If you want to enjoy 3D content, connect a 3D
device (3D compliant AV receiver or TV) to the
player's HDMI OUT port using a high-speed
HDMI cable. Put on 3D glasses before playing
the 3D content.
• The player outputs 3D signals only through
HDMI cable connected to the HDMI OUT port.
• The video resolution in 3D play mode is
determined by the resolution of the original 3D
video. You can not change the resolution.
• Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not
operate properly in 3D play mode.
• You must use a high-speed HDMI cable for
proper output of the 3D signal.
• Stay at least three times the width of the screen
from the TV when watching 3D images. For
example, if you have a 46-inch screen, stay 138
inches (11.5 feet) from the screen.
• Place the 3D video screen at eye level for the
best 3D picture.
• When the player is connected to some 3D
devices, the 3D effect may not function properly.
• This player does not convert 2D content into
3D.
• "Blu-ray 3D" and "Blu-ray 3D" logo are
trademarks of the Blu-ray Disc Association.
7 English
Contents
SAFETY INFORMATION
2 Warning
5 Precautions
5 Important Safety Instructions
5 Using the 3D function
GETTING STARTED
9 Accessories
10 Front Panel
10 Rear Panel
11 Remote Control
11 Tour of the Remote Control
CONNECTIONS
13 Connecting to a TV
15 Connecting to an Audio System
15 Method 1 Connecting to an HDMI (HDR)
compatible AV receiver that supports
pass through
16 Method 2
Connecting to an HDMI
compatible AV
receiver
that does not
support pass through
16 Method 3 Connecting to an AV receiver
with a Digital Optical Cable
17 Connecting to a Network Router
17 Wired Network
17 Wireless Network
SETTINGS
18 The Initial Settings Procedure
18 The Home Screen
19 Accessing the Settings Screen
19 Buttons on the Remote Control Used for
the Settings Menu
20 Settings Menu Functions
20 Picture
21 Sound
22 Network
22 Smart Hub
22 System
24 Support
24 Networks and the Internet
24 Configuring Your Network Connection
27 Upgrading Software
28 Update now
28 Auto Update
Contents
8 English
Contents
MEDIA PLAY
29 Playing Commercial Discs
29 Disc Storage & Management
29 Playing Photos, Videos, and Music
(Multimedia)
30 Playing Media Content Saved on a USB
Device
30 Playing Media Content Saved in a
Computer/Mobile Device
31 Playing a Disc with User Recorded
Content
32 Controlling Video Playback
32 Buttons on the Remote Control used for
Video Playback
33 Using the Settings Menu During Playback
35 Using the Sort by & Options Menus
35 Controlling Music Playback
35 Buttons on the Remote Control used for
Music Playback
36 Using the Options Menu During Playback
36 Using the Sort by & Options Menus on a
File Screen
37 Repeating Tracks on an Audio CD
37 Shuffling Tracks on an Audio CD
37 Creating a Playlist from an Audio CD
38 Ripping
38 Playing Photo Contents
38 Using the Tools Menu During Playback
39 Using the Sort by & Options Menus
40 Send files
40 Copying Videos, Music or Photos
40 Using the Send Function
NETWORK SERVICES
41 Creating a Samsung Account
41 Before Using Samsung Apps
42 Using Samsung Apps
42 The Samsung Apps Screen at a Glance
43 Starting an Application
44 Screen Mirroring
45 Using the Web Browser
45 Link Browsing and Pointer Browsing
45 The Control Panel at a Glance
47 Using the Setting Menu
49 Linking Your Internet Service Accounts to
the Product
49 BD-LIVE™
APPENDIX
50 Additional Information
50 Notes
53 Resolution according to the contents type
54 Digital Output Selection
55 Troubleshooting
58 Disc and Format Compatibility
58 Disc types and contents your product can
play
58 Disc types your product cannot play
59 Region Code
59 Logos of Discs the product can play
60 Supported Formats
64 Compliance and Compatibility Notice
65 Copy Protection
65 Network Service Disclaimer
66 Licences
68 Specifications
9 English
02 Getting Started
Accessories
Check for the supplied accessories shown below.
OK
TOOLS
INFO
123
DISC
MENU
TITLE MENU
POP-UP
TV
POWER
SOURCE
-
+
VOL
Lithium Battery
Power Cable
User Manual Remote Control
WARNING, DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD,
[The remote control supplied with] This product contains a coin/button cell battery.
If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and
can lead to death. Keep new and used batteries away from children. If the battery compartment does not
close securely, stop using the product and keep it away from children. If you think batteries might have
been swallowed or placed inside any part of the body, seek immediate medical attention.
Getting Started
10 English
Getting Started
Front Panel
POWER BUTTON
REMOTE CONTROL
SENSOR
USB HOST
DISC TRAY
PLAY/PAUSE BUTTON
OPEN/CLOSE BUTTON
LED INDICATOR
Red: Power off
Green: Power on
Blue blinking: Remote control or
Front key input, Software update
STOP BUTTON
| NOTES |
\To upgrade the product's software through the USB HOST jack, you must use a USB memory stick.
\When the product displays an Ultra HD Blu-ray or standard Blu-ray Disc's menu, you cannot start the
movie by pressing the Play button on the product or the remote control. To play the movie, you must
select Play Movie or Start in the disc's menu, and then press the OK button on the remote control.
Rear Panel
LAN HDMI OUT
SUB
(Audio Only)
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
POWER
LAN HDMI OUT
SUB
(Audio Only)
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
POWER
HDMI OUT
HDMI 1 outputs audio and video
HDMI 2 outputs audio only
LANPOWER DIGITAL AUDIO OUT
| NOTE |
\To use the Anynet+ (HDMI-CEC) function, connect an HDMI cable to the HDMI 1 terminal.
If you connect the cable to the HDMI 2 terminal, the Anynet+ (HDMI-CEC) function will not be
available.
11 English
02 Getting Started
Remote Control
| NOTE |
\Previous BD-Player remote controls may not be compatible with this player.
Tour of the Remote Control
OK
TOOLS
INFO
123
DISC
MENU
TITLE MENU
POP-UP
TV
POWER
SOURCE
-
+
VOL
Press to play disc or files.
or
Press to pause playing.
Use to enter the disc menu.
Press to move to the Home screen.
Use to select menu items and change
menu values.
Return to the previous menu.
These buttons are used both for menus
on the player and also several Ultra HD
Blu-ray Disc or Blu-ray Disc functions.
Turns the TV on and off.
Use to display playback information.
or
Press and hold this button to display the
number keypad on the screen.
Use to enter the Popup menu/Title menu.
Press to use the Tools menu.
Press to stop a disc or file.
Press to skip chapters. Press and hold to
search backwards or forwards.
| NOTE |
\Design and specifications are subject to
change without prior notice.
Press to open and close the disc tray.
Turns the player on and off.
After setup, allows you to set the input
source on your TV.
TV volume adjustment.
| NOTE |
\Out of the box, the TV volume, source, and
on/off buttons only work with Samsung
TVs. To use these buttons with another TV
brand, enter the appropriate TV Control
Code listed on page 12.
1
Use a coin to turn the remote
control cover counterclockwise
to remove it as shown in the
figure above.
2
Insert a 3V lithium battery. Keep
the positive (+) pole facing up
when inserting the battery. Put
the battery cover on and align
the ' ' marks side by side as
shown in the figure above.
3
Use a coin to turn the cover
clockwise as far as it will go to
fix it in place.
Installing Batteries
12 English
Getting Started
Using Remote Control Buttons to Enter
TV Codes
1. Press and hold the
TV POWER button.
2. While holding the
TV POWER button,
press the buttons on the
remote that correspond
to a two-digit TV Code
from the list below. Use
the illustration to the right
as a guide.
For example: To enter 01, press the TOOLS
button and then press the DISC MENU
button. Note that some TV brands have more
than one 2-digit code. If the first code does
not work, try the next.
TV Control Codes
Brand Codes
SAMSUNG 01, 02, 03, 04, 05, 06, 07, 08, 09
AIWA 82
ANAM 10, 11, 12, 13, 14, 15, 16, 17, 18
BANG & OLUFSEN
57
BLAUPUNKT 71
BRANDT 73
BRIONVEGA 57
CGE 52
CONTINENTAL
EDISON
75
DAEWOO
19, 20, 23, 24, 25, 26, 27, 28, 29,
30, 31, 32, 33, 34
EMERSON 64
FERGUSON 73
FINLUX 06, 49, 57
FORMENTI 57
FUJITSU 84
GRADIENTE 70
GRUNDIG 49, 52, 71
HITACHI 60, 72, 73, 75
IMPERIAL 52
JVC 61, 79
LG
06, 19, 20, 21, 22, 78
Brand Codes
LOEWE 06, 69
LOEWE OPTA
06, 57
MAGNAVOX
40
METZ 57
MITSUBISHI 06, 48, 62, 65
MIVAR 52, 77
NEC 83
NEWSAN 68
NOBLEX 66
NOKIA 74
NORDMENDE
72, 73, 75
PANASONIC 13, 53, 54, 74, 75
PHILIPS 06, 56, 57
PHONOLA 72, 73, 75
PIONEER 58, 59, 73, 74
RADIOLA 06, 56
RADIOMARELLI 57
RCA 45, 46
REX 74
SABA 57, 72, 73, 74, 75
SALORA 74
SANYO 41, 42, 43, 44, 48
SCHNEIDER 06
SELECO 74
SHARP 36, 37, 38, 39, 48
SIEMENS 71
SINGER 57
SINUDYNE 57
SONY 35, 48
TELEAVA 73
TELEFUNKEN
67, 73, 75, 76
THOMSON 72, 73, 75
THOMSON ASIA 80, 81
TOSHIBA
47, 48, 49, 50, 51, 52
WEGA 57
YOKO 06
ZENITH 63
OK
TOOLS
INFO
123
DISC
MENU
TITLE MENU
POP-UP
TV
POWER
SOURCE
-
+
VOL
1
8
5
2
9
7
4
3
0
6
13 English
03 Connections
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI
IN jack on your TV.
- Do not connect the power cord to the wall outlet until you have made all the other connections.
- When you change the connections, turn off all devices before you start.
LAN HDMI OUT
SUB
(Audio Only)
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
POWER
LAN HDMI OUT
SUB
(Audio Only)
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
POWER
Audio
Video
| NOTES |
\To use the Anynet+ (HDMI-CEC) function, connect the HDMI cable to the HDMI 1 terminal.
If you connect the cable to the HDMI 2 terminal, the Anynet+ (HDMI-CEC) function will not be
available.
- The HDMI 2 terminal does not output a video signal.
\If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the
DIGITAL AUDIO OUT on the product to an audio system to hear audio.
\An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
\Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual
of your TV.
\When you connect the product to your TV using an HDMI cable or to a new TV, and then turn it on for
the first time, the product automatically sets the HDMI output resolution to the highest supported by
the TV.
\A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
\To view video in the HDMI 720p, 1080i, 1080p or 2160p output mode, you must use a high speed
(category 2) HDMI cable.
Connections
14 English
Connections
\HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears
on the screen.
\If your TV does not support HDCP (High-bandwidth Digital Content Protection) version 2.2, some of
Ultra HD Blu-ray titles may play at the 1080p resolution.
- This operation is regulated by the Ultra HD Blu-ray Disc content's copyright protection standard
according to the producer's intention to avoid infringing the copyright.
- To reproduce Ultra HD Blu-ray Disc at its original resolution, connect the HDMI cable to a TV's HDMI
input port which supports HDCP 2.2.
- To check whether the TV supports HDCP 2.2, check the HDMI port on the back of the TV or refer
to the TV user's manual.
\This product supports the HDR function. (HDR: High Dynamic Range is a technique used in imaging to
reproduce a greater dynamic range of luminosity than is possible with conventional imaging devices.)
- To take advantage of the HDR function, you need HDR content, a TV supporting HDR, and a high-
speed HDMI cable.
- Connect the player to an HDMI input terminal on the TV that supports the HDR function using the
high speed HDMI cable.
- Use the TV's menu to activate the HDR related function. For further information, refer to the TV's
user manual.
15 English
03 Connections
Connecting to an Audio System
You can connect this product to an audio system using the methods illustrated below.
- Do not connect the power cord to the wall outlet until you have made all the other connections.
- When you change the connections, turn off all devices before you start.
Method
1 Connecting to an HDMI (HDR) compatible AV receiver that supports pass through
• Connect an HDMI cable (not supplied) from the HDMI OUT 1 jack on the back of the product to the
HDMI IN jack on your receiver. Connect another HDMI cable from the HDMI OUT jack of your receiver
to the HDMI IN jack of your TV.
- Your receiver must have UHD pass through capability to pass through UHD video content.
LAN HDMI OUT
SUB
(Audio Only)
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
POWER
LAN HDMI OUT
SUB
(Audio Only)
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
POWER
Audio/Video
Video
HDMI (HDR)
compatible
AV receiver
| NOTE |
\If the AACS 2.0 was applied to the contents that you want to play, it may not be displayed on the screen
depending on the AV receiver connected. For more detailed information, refer to the user manual of your
AV receiver.
16 English
Connections
Method 2
Connecting to an HDMI
compatible AV
receiver
that does not support
pass through
• Connect an HDMI cable (not supplied) from the
HDMI OUT 1 jack on the back of the product
to the HDMI IN jack on your your TV. Connect
another HDMI cable from the HDMI OUT 2 jack
on the product to the HDMI IN jack on your
receiver.
LAN HDMI OUT
SUB
(Audio Only)
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
POWER
LAN
HDMI OUT
SUB
(Audio Only)
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
VideoAudio
HDMI compatible
AV receiver
| CAUTION |
\Do not connect the HDMI OUT 1 and HDMI
OUT 2 terminals of the product with an HDMI
cable.
Method 3 Connecting to an AV receiver
with a Digital Optical Cable
• Using a digital Optical cable (not supplied),
connect the OPTICAL DIGITAL AUDIO OUT
jack on the product to the DIGITAL OPTICAL
IN jack of the receiver.
• You will hear sound only through the front two
speakers with Digital Output set to PCM.
LAN HDMI OUT
SUB
(Audio Only)
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
POWER
LAN
HDMI OUT
SUB
(Audio Only)
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
Audio
7.1 Channel Amplifier
| NOTE |
\If you connect a receiver to the player's
OPTICAL DIGITAL AUDIO OUT port, receiver’s
audio reproduction may not synchronize with that
of the TV.
17 English
03 Connections
Connecting to a Network Router
You can connect your product to your network
router using one of the methods illustrated below.
To use the DLNA network functionality, you must
connect your PC to your network as shown in the
illustrations.
The connection can be wired or wireless.
Wired Network
LAN HDMI OUT
SUB
(Audio Only)
OPTICAL
DIGITAL
AUDIO OUT
POWER MAIN
( )
Broadband
service
Broadband
service
Broadband modem
(with integrated router)
Broadband
modem
Router
Or
| NOTES |
\Your router or your Internet Service Provider's
policies may prevent the product from
accessing Samsung's software update server.
If this occurs, contact your Internet Service
Provider (ISP) for more information.
\DSL users, please use a router to make a
network connection.
\Use Cat 7 (*STP Type) cable for the connection.
(* Shielded Twist Pair)
Wireless Network
| NOTES |
\If your wireless router supports DHCP, this
product can use a DHCP or static IP address
to connect to the wireless network.
\Set your wireless router to Infrastructure mode.
Ad-hoc mode is not supported.
\The product supports only the following
wireless security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/
AES), WPA2-PSK (TKIP/AES)
\Select a channel on the wireless router that
is not currently being used. If the channel
set for the wireless router is currently being
used by another device nearby, it will result in
interference and communication failure.
\If you select the Pure High-throughput
(Greenfield) 802.11n mode and set the
Encryption type on your router to WEP, TKIP or
TKIP-AES (WPS2Mixed), the product will not
support a connection in compliance with new
Wi-Fi certification specifications.
\Wireless LAN, by its nature, may cause
interference, depending on the operating
conditions (router performance, distance,
obstacles, interference by other radio devices,
etc).
Broadband
service
Wireless Router
18 English
Settings
The Initial Settings Procedure
• The Home screen will not appear if you do
not configure the initial settings.
• The OSD (On Screen Display) may change in
this product after you upgrade the software
version.
• The access steps may differ depending on
the menu you selected.
After you have connected the product to your
TV, turn on the TV and product. When you turn
on the product the first time, the product's Initial
Settings screen appears on the TV. The Initial
Settings procedure lets you set the On Screen
Display (OSD) and menu languages, the aspect
ratio (screen size), and network configuration,
and connect the player to the Internet. Follow the
directions on the screen.
When the initial setup is completed, a tutorial
screen explaining how to use the Home menu will
appear. To exit this screen, press the (RETURN)
button on the remote.
| NOTES |
\If you skip Network Setup during the Initial
Settings procedure, you can configure your
network settings later. See "Configuring Your
Network Connection" on pages 24~27 for
instructions.
\If you want to display the Initial Settings screen
again and make changes, select Settings >
System > Setup in the Home screen or select
the Reset option. (See page 24)
\If you want to use the Anynet+ (HDMI-CEC)
function, please follow the instructions below.
1) Connect the product to an Anynet+ (HDMI-
CEC)-compliant Samsung TV using an HDMI
Cable.
2) Set the Anynet+ (HDMI-CEC) feature to On
in both the TV and the product.
3) Set the TV to the Initial Settings Procedure.
The Home Screen
No Disc
1 2 6
5
7 8 9
SAMSUNG APPSMULTIMEDIAPLAY DISC
RECOMMENDED MY APPS
Settings
3 4
0
1 2 3
WebBrowser
2 3 Screen Mirroring
1
PLAY DISC : Lets you play photos,
videos, or music content from a Disc.
2
MULTIMEDIA : Lets you play photos,
videos, or music content from USB or
mobile devices or PCs.
3
Sign In : Lets you log into your Samsung
account.
4
Search : Lets you search for content
in Apps and YouTube by entering
corresponding search words.
5
Help : The tutorial screen explaining how
to use the Home menu will appear.
6
SAMSUNG APPS : Gives you access to
various applications you can download.
7
RECOMMENDED : Gives you direct
access to recommended applications.
8
MY APPS : Apps downloaded from MY
APPS are displayed.
9
Screen Mirroring : Lets you view the
screen of your smart phone or android
tablet on a TV you have connected to this
product.
0
Settings : Opens the product's menu. In
the menu, you can set various functions to
suit your personal preferences.
19 English
04 Settings
| NOTE |
\If you leave the product in the stop mode for
more than 5 minutes without using it, a screen
saver will appear on your TV. If the product is
left in the screen saver mode for more than 20
minutes, the power will automatically turn off.
Accessing the Settings Screen
1. Select Settings on the Home screen, and
then press OK button. The Settings screen
appears.
Settings
Picture
Sound
Network
Smart Hub
System
Support
Picture
3D Settings
TV Aspect Ratio 16:9 Original
BD Wise Off
Resolution Auto
Movie Frame (24 fps) Auto
Fit Screen Size Size 4
HDMI Colour Format Auto
2. To access the menus, sub-menus, and
options on the Settings screen, please refer
to the remote control illustration in the next
column.
Buttons on the Remote Control Used
for the Settings Menu
OK
TOOLS
INFO
123
DISC
MENU
TITLE MENU
POP-UP
TV
POWER
SOURCE
-
+
VOL
1
2
3
1 (HOME) button : Press to move to the
Home screen.
2 (RETURN) button : Press to return to
the previous menu.
3
OK / DIRECTION buttons :
• Press to move the cursor or
select an item.
• Press the OK button to activate the
currently selected item or confirm a
setting.
Detailed Function Information
Each Settings function, menu item, and individual
option is explained in detail on-screen. To view
an explanation, use the buttons to
select the function, menu item, or option. The
explanation will usually appear on the right side of
the screen.
A short description of each Settings function
starts on the next page. Additional information on
some of the functions is also in the Appendix of
this manual.
20 English
Settings
Settings Menu Functions
Picture
3D Settings
Select whether to play an Ultra HD Blu-ray Disc or
Blu-ray Disc with 3D content in 3D Mode.
If you move to the Home or SAMSUNG APPS
screen while in 3D mode, the product will switch
to 2D mode automatically.
TV Aspect Ratio
Lets you adjust the output of the product to the
screen size and screen format of your TV.
BD Wise
BD Wise is Samsung's latest inter-connectivity
feature.
When you connect a Samsung product and a
Samsung TV with BD Wise to each other via
HDMI, and BD Wise is on in both the product
and TV, the product outputs video at the video
resolution and frame rate of the Ultra HD Blu-ray
Disc, Blu-ray Disc, or DVD disc.
Resolution
Set the output resolution of the HDMI video signal
to BD Wise, Auto, 2160p, 1080p, 1080i, 720p or
576p/480p.
The number indicates the number of lines of video
per frame.
The i and p indicate interlaced and progressive
scan, respectively. Generally, the more lines, the
higher quality.
Movie Frame (24 fps)
If the product is connected to a 24 fps compatible
TV, setting the Movie Frame (24 fps) feature to
Auto lets the product adjust its HDMI output to
24 frames per second automatically for improved
picture quality.
•
You can enjoy the Movie Frame (24 fps) feature
only on a TV supporting this frame rate.
•
Movie Frame is only available when the product
is in the HDMI 1080i, 1080p or 2160p output
resolution modes.
Fit Screen Size
Set the screen to the optimal size. (Available for
Smart Hub and Screen Mirroring only)
HDMI Colour Format
Lets you set the Colour space format for the HDMI
output so that it matches the capabilities of the
connected device (TV, monitor, etc). The screen
goes black momentarily after you have selected a
format.
HDMI Deep Colour
Lets you set the product to output HDMI video
with Deep Colour. Deep Colour provides more
accurate Colour reproduction with greater Colour
depth.
21 English
04 Settings
Sound
Speaker Settings
You can configure this product to connect to a
Multiroom Link compatible speaker wirelessly and
enjoy rich sound.
Speaker Settings : You can set up speakers
that are connected via your home network.
| NOTES |
\To use this feature, you must connect at
least one Multiroom Link speaker.
\Sound quality may be affected by the
condition of your wireless network.
\The network connection can be negatively
affected and even lost if the network
environment deteriorates over time.
\Activating Screen Mirroring disables
Multiroom Link.
\For further details, refer to the Multiroom Link
manual on the Samsung web site:
www.samsung.com ; ;
Search for Product name: UBD-K8500 ;
Manuals ; Multiroom Link ; Download PDF
\The audio from each connected device may
lag behind the video and audio of the device
which is playing the source contents.
Digital Output
Lets you select the digital audio output format that
is suitable for your TV or AV Receiver. For more
details, see the digital output selection table on
page 54.
PCM Downsampling
Lets you choose to have 96kHz PCM signals
downsampled to 48kHz before they are outputted
to an amplifier. Choose On if your amplifier or
receiver is not compatible with a 96kHz signal.
Dynamic Range Control
Lets you apply dynamic range control to Dolby
Digital, Dolby Digital Plus, and Dolby TrueHD
audio.
Auto : Automatically controls the dynamic range
of Dolby TrueHD audio, based on information
in the Dolby TrueHD soundtrack. Also turns
dynamic range control on for Dolby Digital and
Dolby Digital Plus.
Off : Leaves the dynamic range uncompressed,
letting you hear the original sound.
On : Turns dynamic range control on for all three
Dolby formats. Quieter sounds are made louder
and the volume of loud sounds is reduced.
Downmixing Mode
Lets you select the multi-channel downmix method
that is compatible with your stereo system.
You can choose to have the product downmix to
normal stereo or to surround compatible stereo.
DTS Neo:6 Mode
You can enjoy multichannel sound via HDMI
output from a 2 channel audio source.
Audio Sync
In some cases when the product is connected to
a digital TV, the audio signal may not synchronize
with the video signal. If this occurs, adjust the
audio delay time to match the video signal.
•
You can set the audio delay time between 0 ms
and 250 ms. Adjust it to the optimal setting.
| NOTES |
\The audio delay time you specify may not be
exact depending on the content played.
\This function can be used when playing
Optical Disc format Contents.
22 English
Settings
HDMI Audio Output
Set HDMI audio to output through HDMI1 or
HDMI2.
Auto : Audio output will be set automatically
based on the devices connected to HDMI1 and
HDMI2.
HDMI1 : Audio will output to the device connected
to HDMI1.
HDMI2 : Audio will output to the device connected
to HDMI2.
Network
Network Status
Lets you check the current network and Internet
status.
Network Settings
Configure the network connection so you can
enjoy various features such as Internet services
or DLNA functionality, and perform Software
Updates.
Multimedia Device Settings
Lets you control which devices on your network,
such as smart phones and tablets, can share
content with your product.
Device Name
Lets you input a name for the product that will
identify it on your network.
BD-Live Settings
Set various BD-Live functions. BD-Live allows
you to access extra features available on some
Ultra HD Blu-ray Discs or Blu-ray Discs if you are
connected to the Internet.
| NOTE |
\To use this function, connect the USB storage
device first and select it from the BD Data
Management menu.
BD-Live Internet Connection : Lets you fully
allow, partly allow, or prohibit a BD-Live Internet
connection.
BD Data Management : Manage BD data
downloaded from a BD-Live service or
Ultra HD Blu-ray Disc/Blu-ray Disc.
Smart Hub
Terms & Policy
You must review and agree to both the App Terms
& Conditions and the privacy policy to use App
services.
Reset Smart Hub
Resets all Smart Hub settings to their default
settings. To use, you must enter the security PIN.
The default security PIN is 0000.
System
Setup
Lets you re-run the Initial Settings procedure.
Language
You can select the language you prefer for the On-
screen menu, disc menu, audio, subtitles, etc.
•
The language you select for the disc menu,
disc audio, or subtitles will only appear if it is
supported on the disc.
Device Manager
You can connect a wireless USB keyboard or
mouse to the USB port on the front of the product.
Keyboard Settings : Lets you configure a
wireless USB keyboard connected to the
product.
23 English
04 Settings
| NOTE |
\You can use the keyboard only when a
QWERTY keyboard screen or window
appears in the Web Browser.
Mouse Settings : Lets you configure a wireless
USB mouse connected to the product. You can
use the mouse in the product's menu and the
Web Browser in the same way you use a mouse
on your PC.
`To use a mouse with the product's menu:
1. Connect the USB mouse to the product.
2. Click the primary button you selected
in Mouse Settings. The Simple Menu
appears.
3. Click the menu options you want.
| NOTES |
\Some USB HID keyboards and mice may
not be compatible with your product.
\Some HID keyboard keys may not work.
\Wired USB keyboards are not supported.
\Some applications may not be supported.
\If a wireless HID Keyboard does not operate
because of interference, move the keyboard
closer to the product.
Security
The default security PIN is 0000. Enter the default
PIN to access the security function if you haven't
created your own PIN. After you have accessed
the security function for the first time, change the
PIN using the Change PIN function.
BD Parental Rating : Prevents playback of
Ultra HD Blu-ray Discs or Blu-ray Discs with a
rating equal to or above a specific age rating
you have set unless you enter the PIN.
DVD Parental Rating : Prevents playback of
DVDs with a rating above a specific numerical
rating you have set unless you enter the PIN.
Change PIN : Change the 4-digit PIN used to
access security functions.
`If you forget your PIN:
1. Remove any disc or USB storage device.
2. Press and hold the @ (STOP) button on the
top panel for 5 seconds or more.
The initialization message appears on
the screen, and the power will turn off
automatically.
When you turn your product on again, all
the settings will be reset.
General
You can change the options listed below to match
your preferences.
Time Zone : Select the time zone in which you
live.
Menu Transparency : Lets you adjust the
transparency of the menu box.
Anynet+ (HDMI-CEC)
Anynet+ is a convenient function that offers linked
operations with other Samsung product that
have the Anynet+ feature and lets you control
those products with one Samsung TV remote.
To operate this function, you must connect this
product to an Anynet+ Samsung TV using an
HDMI cable.
DivX® Video On Demand
View DivX® VOD Registration Codes to purchase
and play DivX® VOD contents.
24 English
Settings
Support
Remote Management
When activated, lets Samsung Call Centre agents
diagnose and fix problems with your player
remotely. Requires an active Internet connection.
| NOTES |
\Remote Management service might not be
available in some countries.
\To use Remote Management:
1) Call the Samsung Contact Centre and ask
for remote support.
2) Open the player's menu on your TV and
go to the Support section.
3) Select Remote Management, and then
read and agree to the service agreements.
When the PIN screen appears, provide the
PIN number to the agent.
4) The agent accesses your player.
Software Update
This menu allows you to upgrade the product's
software for performance improvements or
additional services.
Contact Samsung
Provides contact information for assistance with
your product.
Reset
Resets all settings to their default settings except
for the network and Smart Hub settings, and then
starts the Setup function. To use, you must enter
the security PIN. The default security PIN is 0000.
Networks and the Internet
When you connect this product to a network,
you can use network based applications and
functions such as Smart Hub and BD-LIVE,
and upgrade the product's software through
the network connection. For more information
about accessing and using Internet services, see
the Network Services chapter of this manual on
pages 41~49. Instructions for configuring the
network connection start below.
Configuring Your Network Connection
Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, and you have a wired or wireless
network, we recommend using the Automatic
configuration procedures described below.
If you are connecting to a wired network, connect
the product to your router using a LAN cable
before you start the configuration procedure.
If you are connecting to a wireless network,
disconnect any wired network connections before
you begin.
To begin configuring your network connection,
follow these steps:
Wired Network
Ğ Wired - Automatic
1. In the Home screen, select Settings, and
then press the OK button.
2. Select Network, and then press the OK
button.
3. Select Network Settings, and then press the
OK button.
4. Select Wired in the Network Settings screen,
and then press the OK button.
5. Select the Connect button, and then press
the OK button. The product detects the wired
connection, verifies the network connection,
and then connects to the network.
25 English
04 Settings
Ğ Wired - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
Follow Steps 1 and 2 in Wired - Automatic, and
then follow these steps:
1. Select Network Status. The product
searches for a network, and then displays the
connection failed message.
2. On the bottom of the screen, select IP
Settings, and then press the OK button.
The IP Settings screen appears.
3. Select the IP Settings field, and then press
the OK button.
4. Select Enter manually in the IP Settings
field, and then press the OK button.
5. Select a parameter to enter (IP Address, for
example), and then press the OK button.
Use the buttons on the remote control
to enter the numbers for the parameter. Use
the buttons on the remote control to
move from entry field to entry field within a
parameter. When done with one parameter,
press the OK button.
6. Press the or button to move to another
parameter, and then enter the numbers for
that parameter following the instructions in
Step 5.
7. Repeat Steps 5 and 6 until you have filled in
all parameters.
| NOTE |
\You can get the Network parameters from your
Internet provider.
8. When finished entering all the parameters,
select OK, and then press the OK button. The
product verifies the network connection and
then connects to the network.
Wireless Network
You can set up a wireless network connection in
four ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
- WPS PIN
When you configure the wireless network
connection, any wireless network devices currently
connected through the product or, if applicable,
the product's current wired connection, will be
disconnected.
Ğ Wireless - Automatic
1. In the Home screen, select Settings, and
then press the OK button.
2. Select Network, and then press the OK
button.
3. Select Network Settings, and then press the
OK button.
4. Select Wireless in the Network Settings
screen, and then press the OK button. The
product searches for and then displays a list
of the available networks.
Network Settings
Select your network type.
Wireless network
iptime23
iptime
solugen_edu#2
Network type Wireless
Refresh WPS(PBC)
You can connect your Ultra
HD Blu-ray player to the
internet. Please select which
wireless network to use.
5. Select the desired network, and then press
the OK button.
6. On the Security screen, enter your network's
Security Code or Pass Phrase.
Enter letters by selecting a letter with an arrow
button, and then pressing OK button.
26 English
Settings
| NOTE |
\To view the password as you enter it, use the
arrow buttons to select Show Password on
the right side, and then press OK button.
7. When finished, select Done and then press
the OK button. The product verifies the
network connection and then connects to the
network.
8. When verification is complete, select OK, and
then press the OK button.
| NOTE |
\You should be able to find the Security Code or
Pass Phrase on one of the set up screens you
used to set up your router or modem.
Ğ Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
1. Follow the directions in Wireless - Automatic
through Step 5.
2. The product searches for a network, and then
displays the connection failed message.
3. On the bottom of the screen, select IP
Settings, and then press the OK button.
The IP Settings screen appears.
4. Select the IP Settings field, and then press
the OK button.
5. Select Enter manually in the IP Settings
field, and then press the OK button.
6. Select a parameter to enter (IP Address, for
example), and then press OK button.
Use the buttons on the remote control
to enter the numbers for the parameter.
Use the buttons on the remote control
to move from entry field to entry field within a
parameter. When done with one parameter,
press the OK button.
7. Press the or button to move to another
parameter, and then enter the numbers for
that parameter following the instructions in
Step 6.
8. Repeat Steps 6 and 7 until you have filled in
all parameters.
| NOTE |
\You can get the Network parameters from your
Internet provider.
9. When finished, select OK, and then press the
OK button. The Security Screen appears.
10. On the Security screen, enter your network's
Security Code or Pass Phrase. Enter letters by
selecting a letter with the buttons,
and then pressing the OK button.
11. When finished, select Done at the right of the
screen, and then press the OK button.
The product verifies the network connection
and then connects to the network.
12. After the product verifies the network, select
OK, and then press the OK button.
Ğ WPS(PBC)
1. In the Home screen, select Settings, and
then press the OK button.
2. Select Network, and then press the OK
button.
3. Select Network Settings, and then press the
OK button.
4. Select Wireless in the Network Settings
screen, and then press the OK button.
5. Press the button on your remote, and then
press the button to select WPS(PBC).
6. Press the OK button on your remote. The
"Press the PBC button on your wireless
router within the next two minutes." message
appears.
27 English
04 Settings
7. Press the WPS(PBC) button on your router
within two minutes. Your product automatically
acquires all the network settings values it
needs and connects to your network.
The Network Status screen appears.
The product connects to the network after the
network connection is verified.
Ğ WPS PIN
Before you begin, open the router's setup menu
on your PC and access the screen with the WPS
PIN entry field.
1. In the Home screen, select Settings, and
then press the OK button.
2. Select Network, and then press the OK
button.
3. Select Network Settings, and then press the
OK button.
4. Select Wireless in the Network Settings
screen, and then press the OK button.
The product searches for and then displays a
list of the available networks.
5. Select the desired network, and then press
the OK button.
6. Select the WPS PIN, and then press the
OK button. The PIN pop-up appears.
7. Enter the PIN into the WPS PIN entry field in
the router's set up screen and then save the
the screen.
| NOTES |
\Contact the manufacturer of the router for
instructions explaining how to access the
route's set up screens or refer to the router's
user's manual.
\For a WPS connection, set your wireless
router's security encryption method to AES.
WPS connections do not support WEP security
encryption.
Upgrading Software
This menu allows you to upgrade the product's
software for performance improvements or
additional services.
• Never turn the product off or back on
manually during the update process.
1. In the Home screen, select Settings, and
then press the OK button.
2. Select Support, and then press the OK
button.
3. Select Software Update, and then press the
OK button.
4. To download update software and update
now, select Update now, and then press the
OK button.
5. To let the product download update software
automatically when available, select Auto
Update, and then press the OK button. See
"Auto Update" on page 28 for details.
| NOTES |
\The upgrade is complete when the product
turns off, and then turns on again by itself.
\Samsung Electronics takes no legal
responsibility for any product malfunction
caused by an unstable Internet connection
or consumer negligence during a software
Update.
\If you want to cancel the upgrade while the
upgrade software is downloading, press the
OK button.
28 English
Settings
Update now
1. Select Support > Software Update >
Update now.
2. An online upgrade downloads and installs the
upgrade software directly from the Internet.
- This option requires an Internet connection.
| NOTES |
\When the system upgrade is done, check the
software details in the Product Information
section of the Contact Samsung screen.
\Do not turn off the product during the Software
Update.
It may cause the product to malfunction.
Auto Update
You can set the Auto Update function so that the
product downloads new upgrade software when it
is in Auto Update mode.
This allows the product to download upgrade
software automatically, when you are not using it.
1. Press the buttons to select Auto
Update, and then press the OK button.
2. Select On / Off.
| NOTE |
\To use the Auto Update function, your product
must be connected to the Internet.
Update by USB
To upgrade by USB, follow these steps:
1. Visit Samsung's website on a computer and
download the update package to a USB
device.
2. Save the update package in the USB device's
top-level folder.
- Otherwise, the product will not be able to
locate the update package.
3. Connect the USB device with the update
package to the product.
4. Select Support > Software Update >
Update now.
5. The software is updated using the update
package on the USB device.
| NOTES |
\There should be no disc in the product when
you upgrade the software using the USB jack.
\When the system upgrade is done, check the
software details in the Product Information
section of the Contact Samsung screen.
\Do not turn off the product during the Software
Update.
It may cause the product to malfunction.
\Software Updates using the USB jack must be
performed with a USB flash memory stick only.
29 English
05 Media Play
Your Ultra HD Blu-ray Player can play content
located on Ultra HD Blu-ray/Blu-ray/DVD/CD
discs, USB devices, PCs, smart phones, tablets,
and on the Web.
To play content located on your PC or a mobile
device, you must connect the PC or mobile device
and the product to your network. To play content
on your PC, you must install DLNA software or
already have DLNA software installed on your PC
and connect the Ultra HD Blu-ray Player to your
PC via your network.
| NOTE |
\PCs running Windows 7 and Windows 8 have
DLNA software (Windows Media Player) built in.
Playing Commercial Discs
1. Press the ^ button to open the disc tray.
2. Place a disc gently into the disc tray with the
disc’s label facing up.
3. Press the ^ button to close the disc tray.
Playback starts automatically.
4. If playback does not start automatically, press
the (HOME) button, select PLAY DISC on
the upper left of the Home screen, and then
press the OK button on the remote.
Disc Storage & Management
• Holding Discs
- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping.
- Avoid touching the surface of a disc where
data has been recorded.
- Hold the disc by the edges so that fingerprints
will not get on the surface.
- Do not stick paper or tape on the disc.
• Cleaning Discs
- If you get fingerprints or dirt on a
disc, clean it with a mild detergent
diluted in water and wipe with a
soft cloth.
- When cleaning, wipe gently from
the inside to the outside of the disc.
• Disc Storage
`Do not keep in direct sunlight.
`Keep in a cool ventilated area.
`Keep in a clean protective jacket and store
vertically.
Playing Photos, Videos, and Music
(Multimedia)
You can play media content saved on a USB
device, smartphone, camera, or computer on the
product.
| NOTES |
\You cannot play media content if the content
or the storage device is not supported by the
product.
\Backup important files before connecting a
USB device. Samsung is not responsible for
damaged or lost files.
Media Play
30 English
Media Play
Playing Media Content Saved on a USB
Device
1. Connect your USB device to the product.
2. Press the (HOME) button. Select
MULTIMEDIA, and then Storage. The USB
devices connected to the product are listed.
3. Select the device you want to connect to.
The folders and files in the selected USB are
listed.
4. Select the media content you want to play
from the list. The media content plays.
| NOTE |
\Alternatively, select the Media Type you want to
play (Videos, for example), then select the file
you want to play, and then press the button
to play the content.
5. To exit, press the @ (STOP) button or
(RETURN) button.
| NOTE |
\If you connect a USB device to the product, a
popup window appears on the screen so that
you can easily navigate the folders and files of
the USB device.
Playing Media Content Saved in a
Computer/Mobile Device
You can play media content on the product stored
on a computer or mobile device connected to the
same network as the product.
| NOTES |
\Only available with Samsung phones supporting
DLNA functionality.
\You may experience compatibility issues when
attempting to play media files via a third-party
DLNA server.
\The content shared by a computer or a
mobile device may not play depending on the
encoding type and file format of the content. In
addition, some functions may not be available.
\The media content may not play smoothly
depending on the network status. If the content
does not play smoothly, transfer the content to
a USB device, connect the USB device to the
player, and then play the content from the USB
device.
1. Connect the smart device and product to the
same network.
2. Press the (HOME) button. Select
MULTIMEDIA, and then Storage. Storage
devices connected to the same network as
the product are listed.
3. Select a desired storage device. The folders
and files shared by the selected storage
device are listed.
4. Select the media content you want to play
from the list. The media content plays.
| NOTES |
\Alternatively, select the Media Type you want
to play (Videos, for example), select the file you
want to play, and then press the button to
play the content.
\Playing UHD BD content may require a network
connection. Depending on the network
environment and status of Contents Server
(Studio), playback may not be successful.
5. To exit, press the @ (STOP) button or
(RETURN) button.
31 English
05 Media Play
Allowing a Connection with a Mobile Device
(HOME → Settings → Network → Multimedia
Device Settings)
To play the media content stored on a mobile
device, you must allow the connection between
the mobile device and the product.
| NOTE |
\You can connect a mobile device to any DLNA
DMC device, such as your player. DLNA DMC
function enables users to connect a mobile
device to the product, search for media
content, and control play operations on the
product.
1. Navigate to Settings > Network and select
Multimedia Device Settings. The mobile
devices connected to the same network as
the product are listed.
2. Allow connection with the device you wish
to connect to the product. You can only
play media files from devices that have been
allowed to connect to the product.
| NOTE |
\If a mobile device requests to play media
content, the connection confirmation window
appears on the TV connected to the product so
that you can easily connect the mobile device.
Playing a Disc with User Recorded
Content
You can play multimedia files you have recorded
on Blu-ray, DVD, or CD discs.
1. Place a user recorded disc into the disc
tray with the disc’s label facing up, and then
close the tray. The Device Connected pop-up
appears.
2. Use the buttons to select the type of
content you want to view or play -
All, Photos, Videos or Music - and then
press the OK button.
| NOTE |
\Even though the product will display folders for
all content types, it will only display files of the
Content Type you selected in Step 2.
For example, if you selected music, you will
only be able to see music files. You can change
this selection by returning to the
MULTIMEDIA
screen and repeating Step 2.
3. A screen appears listing the contents of the
disc. Depending on how the contents are
arranged, you will see either folders, individual
files, or both.
4. If necessary, use the buttons to
select a folder, and then press the OK button.
5. Use the buttons to select a file to
view or play, and then press the OK button.
6. Press the (RETURN) button one or more
times to exit a current screen, exit a folder, or
to return to the Home screen.
7. Go to pages 32~40 for instructions that
explain how to control playback of videos,
music, and pictures on a disc.
32 English
Media Play
Controlling Video Playback
You can control the playback of video content located on a Disc, USB, mobile device or PC. Depending
on the disc or contents, some of the functions described in this manual may not be available.
Buttons on the Remote Control used for Video Playback
Using the disc menu, title menu, popup
menu, and title list
DISC
MENU
button
During playback, press this button
to display the Disc menu.
TITLE
MENU
button
During playback, press this button
to display the Title menu.
• If your disc has a playlist, press
View to go to the playlist.
POPUP
MENU
button
During playback, press this button
to display the Popup menu.
Playback related buttons
The product does not play sound in Search, or
Step mode.
• To return to normal speed playback, press the
p button.
p button
Starts playback. When a disc is
playing, push to pause playback.
Push again to restart.
@ button Stops playback.
Fast
Motion Play
During playback, press and hold
the [ or ] button.
Each time you press and hold the
[ or ] button, the playback
speed will change.
Slow
Motion Play
In Pause mode, press and hold
the ] button.
Each time you press and hold the
] button, the playback speed
will change.
Skip
Motion Play
During playback, press the [ or
] button.
Each time you press the [ or
] button, the disc moves to the
previous or next chapter or file.
OK
TOOLS
INFO
123
DISC
MENU
TITLE MENU
POP-UP
TV
POWER
SOURCE
-
+
VOL
33 English
05 Media Play
Using the Settings Menu During
Playback
During playback or in pause mode, press the
TOOLS button.
Use the buttons to select the and
then press the OK button.
Play from the
beginning
Select to return to the beginning
of the movie, and then press the
OK button.
3D
Use the 3D menu when playing
a 3D file.
| NOTES |
\The 3D menu becomes
available only when you are
playing a 3D video file.
\If you move to the Home or
Smart Hub Home screen
while in 3D mode, the
product will switch to 2D
automatically.
Select Scene
- Search Titles : If there is
more than one movie on the
disc or device, select to start
a different title.
1. Select Search Titles, and
then press the OK button.
2. Use the buttons to
select a title, and then press
the OK button.
| NOTE |
\When searching DVD titles in
stop mode, press the INFO
button, and then enter the
title number (01,02,...) you
want.
-Chapter Search : Select
to play the chapter of your
choice.
Select Scene
1. Select Chapter Search,
and then press the OK
button.
2. Use the buttons to
select a chapter, and then
press the OK button.
-Search Time Bar : Select
to play the movie from a
selected time point.
1. Select Search Time Bar,
and then press the OK
button.
2. Using the buttons,
enter the time point you
want to go to.
| NOTES |
\You can also use the
buttons to advance or
rewind the movie. The movie
advances or rewinds one
minute each time you press
the buttons.
\If the index information in
the file is damaged or the file
does not support indexing,
you will not be able to use
the Select Scene function.
\If you run files on a network
device after you have
connected the player to a
computer on your network,
Select Scene may not work.
Search
- Search Scene : You can use
the Search Scene function
during playback to view or
start a movie from the scene
of your choice.
- Search Titles : If there is
more than one movie on the
disc or device, select to start
a different title.
- Search Time Bar :
Select to
play the movie from a selected
time point.
34 English
Media Play
Subtitle
Settings
Lets you set the desired subtitle
options.
Repeat mode Lets you repeat a title, chapter,
or specific section.
Full Screen
Lets you set the size of the video
image.
Picture Mode
Lets you set the picture mode.
- Dynamic : Increases
sharpness and brightness.
- Standard : Choose this
setting for most viewing
applications.
- Movie : The best setting for
watching movies.
- User : Lets you adjust
the sharpness and
noise reduction function
respectively.
| NOTE |
\When you use the BD wise
function, this menu will not
appear.
Multiroom
Link
Select to control the volume of
Multiroom speakers.
-Volume : Adjusts the volume
level. Press the buttons
on the remote control.
-Mute : Mutes the sound
from this player. Press again
to restore the sound to the
previous volume level.
| NOTE |
\This menu is only available
when you connect to a
Multiroom Link compatible
speaker.
Audio Use to set the desired audio
language.
Audio Sync Select to adjust the audio sync.
Subtitle Use to set the desired subtitle
language.
Angle
Lets you view a scene from
another angle. The Angle option
displays the number of angles
available to view. When an Ultra
HD Blu-ray Disc/Blu-ray Disc/
DVD contains multiple angles
of a particular scene, you can
change to another angle.
Information Lets you view video file
information.
BONUSVIEW
Video Use to set the desired
bonusview option.
BONUSVIEW
Audio
| NOTES |
\Depending on the disc or storage device, the
menu may differ.
\Video files with high Bit rates of 20Mbps or
more strain the product's capabilities and may
stop playing during playback.
35 English
05 Media Play
Using the Sort by & Options Menus
Using the Sort by Menu
On a file screen containing video files, select
and then press the OK button.
Date
Groups all the the video files on
the media or storage device by
date. Click a group to see the
videos in that group.
Title Displays all the video files on the
media or storage device by title.
Folder
Displays all the folders on the
media or storage device in
alphabetical order.
| NOTE |
\Depending on the disc or storage device, the
menu may differ.
Using the Options Menu
On a file screen containing video files, select
and then press the OK button.
Play Selected
Lets you select specific files
to play. It works essentially the
same for all media.
Send
Select this menu to upload
selected files to a web site
(Picasa, Facebook etc) or
device. To use this menu, you
need to establish an account
with the on-line site, and then
log in using the Log In function.
See "Using the Send Function"
on page 40.
Controlling Music Playback
You can control the playback of music content
located on a Disc, USB, mobile device or PC.
Depending on the disc or contents, some of the
functions described in this manual may not be
available.
Buttons on the Remote Control used
for Music Playback
OK
TOOLS
INFO
123
DISC
MENU
TITLE MENU
POP-UP
TV
POWER
SOURCE
-
+
VOL
4
2
1 3
1[ ] buttons : Move to the previous/
next track.
2@ button : Stops a track.
3
Fast Play (Audio CD (CD-DA) only)
During playback, press and hold the [ or
] button.
Each time you press and hold the [
or ] button, the playback speed will
change.
4p button : Plays/Pauses a track.
| NOTE |
\If you don't press a button within five seconds
of inserting an Audio CD, the screen is
displayed in Full Screen mode.
To go back to the Play List screen, press the
(RETURN) button on the remote control.
36 English
Media Play
Using the Options Menu During
Playback
On the music file playback screen, use the
buttons to select the and then press
the OK button.
Play Selected
Lets you create a playlist by
selecting specific tracks to play.
It works essentially the same
way for all media. See "Creating
a Playlist from an Audio CD" on
page 37.
Ripping
This function converts CD audio
to the mp3 or wav format,
as selected by the user, and
saves the converted files on a
USB device or a mobile device
connected to the product. See
"Ripping" on page 38.
Information
Select to see the (Contents)
information.
| NOTE |
\Depending on the disc or storage device, the
menu may differ.
Using the Sort by & Options Menus on
a File Screen
Using the Sort by Menu
On a file screen containing music files, select the
and then press the OK button.
Track
Displays all the music tracks on
the media or storage device in
alphabetical order.
Album Displays all music on the media
or storage device by album.
Artist
Displays all the the music files
on the media or storage device
by artis.
Genre
Displays all the music on the
media or storage device by
genre.
Folder Displays all the folders on the
media or storage device.
| NOTE |
\Depending on the disc or storage device, the
menu may differ.
Using the Options Menu
On a file screen containing music files, select the
and then press the
OK
button.
Play Selected
Lets you select specific tracks
to play. It works essentially the
same for all media.
See the "Repeating Tracks on
an Audio CD" on page 37.
Send
Select to send selected files to
other devices. See "Using the
Send Function" on page 40.
Encoding Select to manage the text
encoding options.
Add to
Playlist Select to create a playlist.
Index
Select to display the list of
music titles with the same initial
letter as that selected.
| NOTE |
\Depending on the disc or storage device, the
menu may differ.
37 English
05 Media Play
Repeating Tracks on an Audio CD
You can set the product to repeat tracks on an
audio CD (CD-DA/MP3).
1. On the Playback screen, use the
buttons to select in the lower left corner
of the screen, and then press the OK button.
2. Use the buttons to select the repeat
mode you want - Off, One Song, or All - and
then press the OK button.
00:00:39 00:02:38
TRACK 001
TRACK 001 00:43
TRACK 002 03:56
TRACK 003 04:41
TRACK 004 04:02
TRACK 005 03:43
TRACK 006 03:40
TRACK 007 04:06
TRACK 008 03:52
TRACK 009 03:04
TRACK 010 04:02
Shuffling Tracks on an Audio CD
You can set the product to play tracks on an audio
CD (CD-DA/MP3) at random.
1. On the Playback screen, use the
buttons to select in the lower left corner of
the screen, and then press the OK button.
2. Use the to set the Shuffle mode On or
Off, and then press the OK button.
Creating a Playlist from an Audio CD
1. With the Playback screen displayed, select
the and then press the OK button. The
Settings menu appears.
2. Use the buttons to select Play
Selected, and then press the OK button.
3. Use the buttons to select a track, and
then press the OK button. A check appears
to the left of the track.
4. Repeat Step 3 to select and check additional
tracks.
5. To remove a track from the list, move to the
track, and then press the OK button again.
The check on the track is removed.
6. When done, press the buttons to select
Play, and then press the OK button. The
Music Playback screen reappears listing only
the tracks you checked. The selected tracks
play automatically.
| NOTES |
\You can create a playlist with up to 99 tracks
on Audio CDs (CD-DA).
\On the Selection Play screen, you can also
choose Select All, Clear All, and Cancel.
- Use Select All to select all tracks. This
cancels your individual track selections.
When you press the (RETURN) button
on your remote control or select the Play
button, and then press the OK button, all
tracks will appear on the Music Playback
screen, and the product will begin to play all
tracks from Track 001.
- Use Clear All to deselect all selected tracks
at once. Then, select individual tracks or
use Select All to select all the tracks, and
then press the (RETURN) button on your
remote control. If you do not use Select All
or select individual tracks, the Playlist will not
change.
- Cancel cancels any changes you made on
the Play Select screen. When you return
to the Playback screen, the Playlist will be
unchanged.
38 English
Media Play
Ripping
1. Insert a USB device into the USB jack on the
front of the product.
2. With the Playback screen displayed, select
the and then press the OK button. The
Settings menu appears.
3. Use the buttons to select Ripping, and
then press the OK button.
4. Select the ripping encoding type from the list.
Ripping types supported are:
WAV Lossless Copy
MP3 320 kbps
MP3 192 kbps
5. Use the buttons to select a track, and
then press the OK button. A check appears
to the left of the track.
6. Repeat Step 5 to select and check additional
tracks.
7. To remove a track from the list, move to the
track, and then press the OK button again.
The check on the track is removed.
8. When done, select the Rip using the
buttons, and then press the OK button. The
Rip pop-up appears.
9. Use the buttons to select the device to
store the ripped files to, and then press the
OK button.
| NOTE |
\Do not disconnect the device while ripping is in
progress.
10. If you want to cancel ripping, press the OK
button and then select Yes. Select No to
continue ripping.
11. When ripping is complete, the "Successfully
Ripped." message appears. Press the OK
button.
12. Press the (RETURN) button or select
Cancel, and then press the OK button to go
back to the Playback screen.
| NOTES |
\This function does not work with DTS Audio
CDs.
\This function may not be supported by some
discs.
\Ripping encodes music into the .mp3 format at
192kbps and 320kbps.
\On the Ripping screen, you can also choose
Select All and Clear All.
\Use Select All to select all tracks and press the
OK button. This cancels your individual track
selections.
\Use Clear All to deselect all selected tracks at
once.
Playing Photo Contents
You can play photo contents located on a DVD,
USB, mobile device or PC.
Using the Tools Menu During Playback
During playback or in pause mode, press the
TOOLS button.
Use the buttons to select the and
then press the OK button.
Slideshow
Settings
Select to change the Slide Show
settings.
- Speed : Select to set the slide
show speed.
-Effects : Select to set the
slide show effect.
Rotate
Select to rotate the picture. (This
can rotate the picture either
clockwise or counter clockwise.)
Zoom Select to enlarge the current
picture. (Enlarge up to 4 times)
39 English
05 Media Play
Picture Mode
Select to set the picture mode.
- Dynamic : Choose this
setting to increase Sharpness.
- Standard : Choose this
setting for most viewing
applications.
- Movie : This is the best
setting for watching movies.
- User : Lets you adjust
the sharpness and
noise reduction function
respectively.
| NOTE |
\This menu cannot be
displayed when you use the
BD Wise function.
Background
Music
Select to listen to music while
viewing a slide show.
| NOTE |
\The number of music files
available from external
devices will differ depending
on the device.
Multiroom
Link
Select to control the volume of
Multiroom speakers.
-Volume : Adjusts the volume
level. Press the
buttons
on the remote control.
-Mute : Mutes the sound
from this player. Press again
to restore the sound to the
previous volume level.
| NOTE |
\This menu is only available
when you connect to a
Multiroom Link compatible
speaker.
Send Select to send the selected file
to other devices.
Information
Select to see the (Contents)
information.
| NOTES |
\Depending on the disc or storage device, the
menu may differ.
\To enable the Background Music function, the
photo file must be in the same storage media as
the music file.
Note that the sound quality can be affected by the
Bit rate of the MP3 file, the size of the photo, and
the encoding method.
\You can't enlarge the subtitle and PG graphic
in the full screen mode.
Using the Sort by & Options Menus
Using the Sort by Menu
On a file screen containing photo files, select the
and then press the OK button.
Date
Groups all the the photo files on
the media or storage device by
date. Click a group to see the
photos in that group.
Title
Displays all the photo files on
the media or storage device by
title.
Folder Displays all the folders on the
media or storage device.
| NOTE |
\Depending on the disc or storage device, the
menu may differ.
40 English
Media Play
Using the Options Menu
On a file screen containing photo files, select the
and then press the OK button.
Slide Show
Starts the slide show. Shows
all the files in the current folder,
one after another. If you want
to create a slide show with a
selected group of photos, see
Play Selected below.
Play Selected
Lets you select specific photos
to see. It works essentially the
same for all media.
See "Creating a Playlist from an
Audio CD" on page 37 for
instructions.
Send
Select this menu to upload
selected files to a web site
(Picasa, Facebook, etc.) or
device. To use this menu, you
need to establish an account
with the on-line site, and then
log in using the Log In function.
See "Using the Send Function"
on page 40.
| NOTE |
\Depending on the disc or storage device, the
menu may differ.
Send files
Copying Videos, Music or Photos
Contents DISC/Network
Device USB
DISC/USB
Network Device
Music Supported Supported
Photos Supported Supported
Videos Supported Supported
• Disc (CD-DA/CD-R/CD-RW, DVD±R (Finalised)/
DVD+RW/DVD-RW (Finalised)) USB
• PTP USB is not available when you copy to
USB.
Using the Send Function
You can upload files to a Network Device, or a
device.
1. With the videos, music or photos file screen
displayed, and then press the . The
Options menu appears.
2. Use the buttons to select Send, and
then press the OK button.
3. Use the buttons to select a file, and
then press the OK button. A check appears
to the left of the file.
4. Repeat Step 3 to select and check additional
files.
5. To remove a file from the list, move to the file,
and then press the OK button again.
The check on the file is removed.
6. When done, press the buttons to
select Send, and then press the OK button.
The Send pop-up appears listing the on-line
sites (Picasa, Facebook, etc.) or devices that
you can send the files to.
7. Select a destination, and then press the OK
button.
8. If you are sending the files to an on-line site,
the site starts. Log in and follow the directions
on the screen.
| NOTE |
\To send files to an on-line site you must have
an account with that site.
41 English
06 Network Services
You can enjoy various network services such as
streaming video or on-line apps by connecting the
product to your network.
To use network services, you must first:
1. Connect the product to a network.
(See page 17)
2. Configure the network settings.
(See pages 24~27)
Creating a Samsung Account
Create a Samsung account so you can take
advantage of all Samsung has to offer on line.
Set up accounts for each household member so
each member can access their own accounts on
Facebook, Twitter, etc. You also need a Samsung
account if you want to download for-pay apps and
rent movies.
1. On the Home screen, press the . The Sign
In screen appears.
2. Select Create Account, and then press the
OK button.
The Samsung account Terms & Conditions,
Privacy Policy screen appears.
3. Press the OK button to agree, press the
button, and then press the OK button.
The Create Account screen appears.
4. Select the ID field, and then press the OK
button. The keyboard pop-up appears.
5. Enter your e-mail address using the keyboard.
Use the arrow buttons to move from character
to character.
Press OK to select a character. Select the
Caps on the left to enter capitals. Select the
123#& to select additional symbols.
6. When finished, select the Done on the
keyboard, and then press the OK button. The
Create Account screen reappears.
7. Enter a password, your first name, and last
name in the same fashion.
8. Select the Date of Birth field, and then select
numbers using the up and down arrow
buttons or by pressing numbers on your
remote. Press the OK button when done.
9. After you have finished with all the fields,
press the button, and then press the OK
button. Connecting appears, and then the
account confirmation message.
10. Press the OK button. The Set Profile Picture
screen appears.
| NOTE |
\Samsung sends a confirming e-mail to the
address you entered. You must open the e-mail
and respond as requested to finalise your
account.
11. Select a picture to identify your account,
and then press the OK button. The Account
Created screen appears.
12. Press the OK button. The Home screen
appears.
Before Using Samsung Apps
If you haven’t set up Smart Hub, when you use
Apps for the first time, the product will ask you to
perform the Smart Hub set up procedure.
1. On the Home screen, select SAMSUNG
APPS, and then press the OK button.
2. If you haven't set up Smart Hub, the Smart
Hub pop-up appears asking if you want to set
up Smart Hub. Select Yes, and then press the
OK button.
3. Select Start, and then press the OK button.
The Terms and Policy screen appears.
4. On the Additional Services, Terms and
Conditions and Choices screen, you must
review and agree to both the Smart Hub
Terms and Conditions and the Privacy Policy
to use Smart Hub.
5. Scroll down, and then click the View details
to review the full documents.
Network Services
42 English
Network Services
| NOTE |
\You do not need to consent to the
Supplemental Privacy Notice, but one or more
Smart TV features or functionalities may not be
available if you do not.
6. Select I agree to all, and then press the OK
button. The Setup Complete screen appears.
Press the OK button.
Using Samsung Apps
You can download applications from the Internet,
and access various application and view them on
your TV. To access some applications, you need
to have a Samsung account.
| NOTE |
\For some 4K streaming service Apps (Netflix,
Amazon, etc.), the use of 4K service is
enabled if the TV supports HDCP 2.2. If the
TV (or the HDMI terminal connected) does not
support HDCP 2.2, the 4K category will not be
displayed.
The Samsung Apps Screen at a Glance
Most Popular What's New Categories
SAMSUNG APPS
2
2
3
3
4
4
5
5 6 7 98 10
1
MY APPS
RECOMMENDED
1 2
3
WebBrowser
1
RECOMMENDED : Displays
recommended contents managed
by Samsung. You cannot delete
Recommended Apps.
2
MY APPS : Displays your personal gallery
of applications modifiable on the MY
APPS screen.
3
Most Popular, What’s New and
Categories : Select to view and download
additional apps.
The first time you open the SAMSUNG APPS
screen, the Ultra HD Blu-ray Player automatically
downloads a group of free apps. Once these
apps have been downloaded, they appear on the
SAMSUNG APPS screen.
To see additional apps, select Most Popular,
What's New, or Categories on the bottom of the
screen, and then press the OK button.
Most Popular displays the most popular apps,
What's New the newest. Categories displays a
series of icons representing categories such as
Videos, Games, and Sports. Select a category
icon, and then press the OK button. The Ultra HD
Blu-ray Player displays the apps in that category.
43 English
06 Network Services
Downloading an App
1. Select Most Popular, What's New, or
Categories, and then press the OK button.
2. If you selected Categories, select a category
icon, and then press the OK button.
Otherwise, go to Step 3.
| NOTE |
\On the Most Popular, What's New, and
Categories screens, an orange arrow
is displayed on apps you have already
downloaded.
3. Select an app you want to download,
and then press the OK button. The Detail
Information screen for the app appears.
4. Select the Download on the screen, and then
press the OK button. Download changes to
Cancel and the app begins to download.
5. If you want to cancel the download, select
Cancel, and then press the OK button.
6. When the download is complete, Cancel
changes to Open. Select Open, and then
press the OK button to start the application.
Alternately, press the (RETURN) button
until the SAMSUNG APPS screen reappears.
The app you downloaded will be displayed
on the SAMSUNG APPS screen under MY
APPS.
| NOTE |
\If the App cannot be downloaded due to
insufficient remaining internal memory, connect
a USB storage device and try again.
Starting an Application
1. Select SAMSUNG APPS on the Home
screen, and then press the OK button.
2. On the SAMSUNG APPS screen, use the
buttons to select an app, and then
press the OK button. The app starts.
The Options Menu
Move
1. On the MY APPS screen, select the app you
want to move, and then press the OK button
for 3 seconds.
2. Select Move, and then press the OK button.
3. Use the buttons to move the app.
4. When the app is where you want it, press the
OK.
Delete
1. On the MY APPS screen, select the app you
want to delete, and then press the OK button
for 3 seconds.
2. Select Delete, and then press the OK button.
3. Use the buttons to select Yes, and then
press the OK button.
Delete Multiple
1. On the MY APPS screen, select an app you
want to delete, and then press the OK button
for 3 seconds.
2. Select Delete Multiple, and then press the
OK button.
3. Use the buttons to select apps you
want to delete, and then press the OK button.
A check appears next to each app you select.
| NOTE |
\You can deselect an app by highlighting it
again, and then pressing the OK button.
4. Use the button to select Delete at the
bottom of the screen, and then press the OK
button.
| NOTE |
\You can also select Cancel, Select All, or
Deselect All at the bottom of the screen.
44 English
Network Services
View Details
1. On the MY APPS screen, select the app you
want to see detailed information for, and then
press the OK button for 3 seconds.
2. Select View Details, and then press the OK
button.
Change View
This function toggles the Apps screen between
the Most Played view and the Custom View, which
lets you arrange the apps to your liking.
1. On the MY APPS screen, select an app, and
then press the OK button for 3 seconds.
2. Select Change View, and then press the OK
button.
3. Select Yes if you want to change the view.
Select No if you want to keep the current
view.
4. Press OK button.
Lock/Unlock
This function blocks access to an app unless you
enter your PIN. Unlock removes the lock.
1. On the MY APPS screen, select an app you
want to lock, and then press the OK button
for 3 seconds.
2. Select Lock/Unlock, and then press the OK
button. Enter your PIN.
3. Use the buttons to select an app
you want to lock.
4. Press the OK button. A check appears next
to the app.
5. To de-select an app, highlight the app, and
then press the OK button.
6. After you have selected all the apps you want
to lock, select Save at the bottom of the
screen, and then press OK button. Locks
appear next to all the apps you selected.
| NOTE |
\You can also select Cancel, Select All, or
Deselect All at the bottom of the screen.
To unlock apps, follow essentially the same
directions, but select apps that have locks. When
you select Save and then press the OK button,
the locks are removed.
Update Apps
1. On the MY APPS screen, select any app, and
then press the OK button for 3 seconds.
2. Select Update Apps, and then press the OK
button.
3. The Update Samsung Apps screens lists all
the apps that have updates available. Select
each app you want to update, and then press
the OK button. You can also choose Select
All to update all the apps listed.
4. Select Update, and then press the
OK
button.
Screen Mirroring
The Screen Mirroring function lets you view the
screen of your smart phone or android tablet on
the TV that you have connected to the product.
1. On the Home screen, select Screen
Mirroring, and then press the OK button.
2. Launch AllShare Cast or Screen Mirroring
on your device.
3. On your device, find the name of the player in
the list of available devices and then select it.
4. The TV displays a connecting message (for
example, Connecting to Android_92gb...) and
then displays the connected message.
5. In a few moments, the screen of your device
appears on the TV screen.
6. To stop Screen Mirroring, press the
(RETURN) button on the remote control,
or exit the Screen Mirroring function on your
smart phone.
45 English
06 Network Services
| NOTES |
\You can connect your Player to a device that
supports AllShare Cast. Note that all devices
that have AllShare Cast may not be fully
supported, depending on the manufacturer.
For further information on mobile connection
support, refer to the manufacturer’s web site.
\When you are using the Screen Mirroring
function, video stuttering or audio dropouts
may occur, depending on your environment.
\Bluetooth transmissions can interfere with
the Screen Mirroring signal. Before using
the Screen Mirroring function, we strongly
recommend that you turn off the Bluetooth
function on your smart phone or smart device
(tablet, etc.).
Using the Web Browser
You can access the Internet using the Web
Browser application.
Select WebBrowser on the Home screen, and
then press the OK button.
| NOTES |
\When you run the Web Browser with the
product connected by HDMI to a BD Wise
compatible TV - and BD Wise is on - the
browser is maximized to fill the screen and the
TV's resolution is set to the optimal resolution
automatically.
\The Web Browser is not compatible with Java
applications.
\If you attempt to download a file, and the file
cannot be saved, an error message will appear.
\E-commerce (purchasing products online) is
not supported.
\ActiveX is not supported.
\Access may be blocked to some websites or to
web browsers operated by certain businesses.
\Playing Flash videos is not supported.
Link Browsing and Pointer Browsing
The Web Browser provides two types of browsing,
Pointer Browsing and Link Browsing. When you
launch the browser for the first time, Pointer
Browsing is active. If you are using a mouse to
navigate in the Web Browser, we recommend
leaving Pointer Browsing active. If you are using
your remote to navigate in the Web Browser, we
recommend that you replace Pointer Browsing
with Link Browsing. Link Browsing moves a
highlight from one link to the next in the Web
Browser and is much faster than Pointer Browsing
if you are using your remote.
To activate Link Browsing, follow these steps:
1. Use the buttons on your remote to
move the pointer to the Link Browser icon on
the top right of the screen. The Link Browser
icon is the third icon from the right.
The pointer will be in the correct position if the
icon turns blue and the words “Link Browsing”
appear on the screen.
2. Press the OK button. Link Browsing is
activated and will remain active whenever you
bring up the Web Browser.
The Control Panel at a Glance
The Control Panel, which runs across the top
of the screen, has a series of icons which start
a number of useful functions. The icons are
described on the next page, starting with the icon
on the far left of the screen.
New Tab
http://www.samsung.com
http://www.samsung.com
100%
46 English
Network Services
1
• : Moves to the previous page.
• : Moves to the next web page.
• : Displays the Bookmarks and History
screen. You can bookmark the current
page, select an existing bookmark, and
edit and delete bookmarks. You can also
view your browsing history and select a
page to revisit.
• : Moves to the Home screen of the
Web Browser.
• : Lets you enter
a page address manually using the
keyboard pop-up.
• : Reloads the current page so that it
is refreshed on the screen.
• : Adds the current page to your
bookmarks.
• : Lets you search for
information by entering words or
characters using the keyboard pop-up.
See "Using the Keyboard Pop-up" on
the right.
• : Lets you enlarge or shrink the
screen by various percentages.
• / : Lets you switch between
Pointer Browsing and Link Browsing.
• : Lets you configure the Browser’s
settings. See "Using the Setting Menu"
on pages 47~49.
• : Closes the Web Browser.
•
http://www.samsung.com
: Opens a new web
browser tab.
Using the Keyboard Pop-up
When you click the , the
or access a data or text entry field,
and then press the OK button, the keyboard pop-
up appears.
To use the keyboard pop-up with your remote,
follow these steps:
100%
New Tab
http://www.samsung.com
http://www.samsung.com 100%
As you enter characters, recommended text will be shown.
Caps 1 2 3 4 5 6 7 8 9 0 : Clear
q w e r t y u i o p ^ *
123#& a s d f g h j k l ~ @ ! Done
z x c v b n m , . ? - $ Cancel
ENG
www.
.com / _ + %
1. Use the buttons on your remote
to move the highlight to a letter or number of
your choice.
2. Press the OK button to enter the letter or
number into the entry field.
3. To access capital letters, move the highlight to
the Caps key on the top left, and then press
the OK button. Press the OK button again
with the Caps key highlighted to access small
letters again.
4. To access symbols and additional punctuation
marks, highlight the 123#& on the left, and
then press the
OK
button.
5. To delete a character you entered, move the
highlight to the
:
, and then press the OK
button.
6. To delete all the characters you entered, move
the highlight to the Clear and then press the
OK button.
7. When finished entering, move the highlight to
the Done and then press the OK button.
47 English
06 Network Services
| NOTE |
\If you have a wireless keyboard connected
to your product, you can use the wireless
keyboard to enter letters, numbers, symbols,
and punctuation. Note that the wireless
keyboard will work only when the keyboard
popup appears and can only be used to enter
letters, numbers, symbols, and punctuation.
Options on the Keyboard Pop-Up
To access the keyboard pop-up options, highlight
the on the bottom left of the keyboard, and
then press the OK button.
Language
Select the language for the
keyboard.
You can select English, French,
Russian, etc.
Recommended
text
The keyboard suggests
recommended words as you
enter text. You can turn this
function On or Off.
Reset
recommended
text data
Reset erases the Samsung
Keyboard's memory. Select
Reset to erase everything that
the Samsung Keyboard has
learned about your writing style,
including any new words you
have used.
Predict Next
Letter
The keyboard predicts the
next letter as you enter letters.
The predictions appear in a
ring around the letter you have
just entered. You can select
a predicted letter or move to
another letter. You can turn this
function On or Off.
Using the Setting Menu
The Setting menu contains functions that control
how the Browser operates and Browser security
functions. To open the Setting menu, highlight
the icon in the Control Panel, and then press
the OK button. To select an option in the Setting
menu, highlight the option, and then press the OK
button.
New Tab
http://www.samsung.com
http://www.samsung.com
100%
Enable Grabbing
Approved Sites
Private browsing on
Set Search Engine
Web Browser Setting
Help
Close
Enable
Grabbing /
Disable
Grabbing
Turns the Grabber function
on and off. When the Grabber
function is on, you can move a
web page up and down without
dragging the scroll bar.
The Grabber function is only
available in Pointer Browsing.
Approved
Sites
Lets you restrict your children’s
access to inappropriate web
pages by allowing access
only to the web sites you have
registered.
Every time you access this
function, the PIN screen
appears. The first time you
access this function, enter the
default PIN, 0000 using the
number buttons on your remote.
48 English
Network Services
Approved
Sites
You can change the PIN using
the Reset password for the
Approved Sites function. See
below.
Approved Sites feature : Turns
the Approved Sites function on
or off.
Reset password for Approved
Sites : Change the Approved
Sites password.
Add current site : Lets you add
the currently displayed web site
to the Approved Sites list.
Manage Approved Sites : Lets
you key in URLs to add to the
Approved Sites List and delete
sites from the Approved Sites
list.
If you turn this function on and
have not added any sites to the
Approved Sites list, you will not
be able to access any Internet
sites.
Private
browsing off/
Private
browsing on
Enable or disable the Privacy
mode.
When the Privacy mode is
enabled, the browser does not
retain the URLs of sites you visit.
If you want to enable Privacy
mode, select Yes.
If the Privacy mode is running,
the “Stop” icon appears in
front of the URL at the top of
the screen. To disable Privacy
mode, select it again when
Privacy mode is enabled.
Set Search
Engine
You can set the desired Search
Engine.
Web Browser
Setting
Set as homepage : You can set
the Browser's home page.
Pop-up Block : Turns the
Popup Block on and off.
Page Block : You can determine
whether to block advertisements
and select the URLs for which
advertisements are blocked.
General : You can delete
personal information such as
website history and browsing
data (cookies, etc.), and reset
all web browser settings to their
factory defaults. You can also
set the Security Mode.
| NOTE |
\Set the Security Mode to On
to avoid accessing malicious/
phishing sites and prevent
malicious code from running.
Privacy & Security : Prevents
access to inappropriate web
pages. Also allows you to select
not to save your browsing
history.
Encoding : You can set the
Encoding setting for web pages
to Automatic or select the
encoding format manually from
a list.
Pointer : You can set the speed
of the cursor when the cursor
is set to Pointer and turn Smart
Cursor On and Off.
Browser Information : Displays
the version number and
copyright information for the
Web Browser.
Help
Provides basic information
about the operation of the Web
Browser.
49 English
06 Network Services
| NOTE |
\Depending on the web site, some of the
Web Browser Setting functions may not be
activated. Functions that are not activated are
greyed out and cannot be used.
Linking Your Internet Service
Accounts to the Product
The Link Service Accounts function lets you
link your product to your accounts with Internet
services such as Pandora so that the product can
log you in to the service automatically when you
start the app for that service.
Register your account by going to HOME Sign
In Create with Facebook.
BD-LIVE™
Once the product is connected to your network,
you can enjoy various movie-related service
content available on BD-LIVE compliant discs.
1. Attach a USB flash memory drive to the USB
jack on the front of the product, and then
check its remaining memory. The memory
device must have at least 1GB of free space
to accommodate the BD-LIVE services.
2. Select Settings on the Home screen, and
then press the OK button.
3. Select Network, and then press the OK
button.
4. Select BD-Live Settings, and then press the
OK button.
5. Select BD Data Management, and then
press the OK button.
6. Select Select Device, and then press the OK
button.
7. Select USB device, and then press the OK
button.
8. Insert an Ultra HD Blu-ray Disc or Blu-ray Disc
that supports BD-LIVE.
9. Select an item from the list of BD-LIVE service
contents provided by the disc manufacturer.
| NOTE |
\The way you use BD-LIVE and the provided
contents may differ, depending on the disc
manufacturer.
50 English
Appendix
Additional Information
Notes
Settings
3D Settings
• For some 3D discs, to stop a movie during 3D playback, press the @ (STOP)
button once.
The movie stops and the 3D mode option is de-activated.
To change a 3D option selection when you are playing a 3D movie, press the
@ (STOP) button once. The Home Screen menu appears. Press the @ (STOP)
button again, then select 3D Settings in the Ultra HD Blu-ray menu.
• Depending on the content and the position of the picture on your TV screen,
you may see vertical black bars on the left side, right side, or both sides.
TV Aspect Ratio
• Depending on the disc type, some aspect ratios may not be available.
• If you select an aspect ratio and option that is different than the aspect ratio of
your TV screen, the picture might appear to be distorted.
• If you select the 16:9 Original, your TV may display 4:3 Pillarbox (black bars on
the sides of the picture).
BD Wise (Samsung Products only)
• When BD Wise is On, the Resolution setting automatically defaults to BD Wise
and BD Wise appears in the Resolution menu.
• If the product is connected to a device that does not support BD Wise, you
cannot use the BD Wise function.
•
For the proper operation of BD Wise, set the BD Wise option of both the product
and the TV to On.
Digital Output
• Be sure to select the correct Digital Output or you will hear no sound or just
loud noise.
• If the HDMI device (AV receiver, TV) is not compatible with compressed formats
(Dolby Digital, DTS), the audio signal outputs as PCM.
• Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.
• Some Ultra HD Blu-ray Discs and standard Blu-ray Discs do not have
BONUSVIEW audio and Navigation Sound Effects.
• The Digital Output setup does not affect the HDMI audio output to your TV.
It affects the optical and HDMI audio output when your product is connected to
an AV receiver.
• If you play MPEG audio soundtracks, the audio signal outputs as PCM
regardless of your Digital Output selections (PCM or Bitstream).
51 English
07 Appendix
Settings
PCM Downsampling
• Even when PCM Downsampling is set to Off, some discs will only output
downsampled audio through the optical digital output.
• HDMI
- If your TV is not compatible with compressed multi-channel formats (Dolby
Digital, DTS), the product may output PCM 2ch downmixed audio even
though you selected Bitstream (either Reencoded or Unprocessed) in the
setup menu.
- If your TV is not compatible with PCM sampling rates over 48kHz, the product
will output at 48kHz.
BD-Live Internet Connection
• What is a valid certificate?
When the product uses BD-LIVE to send the disc data and a request to the
server to certify the disc, the server uses the transmitted data to check if the
disc is valid and sends the certificate back to the product.
• The Internet connection may be restricted while you are using BD-LIVE
contents.
BD Data Management
• In the external memory mode, disc playback may be stopped if you disconnect
the USB device in the middle of playback.
• Only those USB devices formatted in the FAT file system (DOS 8.3 volume label)
are supported.
We recommend you use USB devices that support the USB 2.0 protocol with
4 MB/sec or faster read/write speed.
• The Resume Play function may not work after you format the storage device.
• The total memory available to BD Data Management may differ, depending on
conditions.
Anynet+ (HDMI-CEC)
• Depending on your TV, certain HDMI output resolutions may not work. Please
refer to the user manual of your TV.
• This function is not available if the HDMI cable does not support CEC.
• If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.
52 English
Appendix
Media Play
Selecting the Audio Language
• The indicator will not appear on the screen if the BONUSVIEW section does
not contain any BONUSVIEW audio settings.
• The languages available through the Audio Language function depend on the
languages that are encoded on the disc. This function or certain languages may
not be available.
• Some Ultra HD Blu-ray Discs and standard Blu-ray Discs may allow you to
select either the PCM or Dolby Digital audio soundtrack in English.
Selecting the Subtitle Language
• Depending on the Ultra HD Blu-ray Disc/Blu-ray Disc / DVD Disc, you may be
able to change the subtitle language in the Disc Menu. Press the DISC MENU
button.
• This function depends on the selection of subtitles that are encoded on the disc
and may not be available on all Ultra HD Blu-ray Discs/Blu-ray Discs/DVDs.
• Information about the main feature BONUSVIEW mode will also appear if the
Ultra HD Blu-ray Disc or Blu-ray Disc has a BONUSVIEW section.
• This function changes both the primary and secondary subtitles at the same
time.
• The total number of primary and secondary subtitles, respectively, is displayed.
53 English
07 Appendix
Resolution according to the contents type
Contents Type
Setup
Ultra HD Blu-ray
Disc/Blu-ray Disc
E-contents/
Digital contents DVD Disc
BD Wise Resolution of Disc 2160p@60/24 480p@60
Auto
Movie Frame : Auto 2160p(1080p)@24 2160p(1080p)@24 2160p(1080p)@24
Movie Frame : Off Max. Resolution of
TV input
Max. Resolution of TV
input
Max. Resolution of
TV input
Movie Frame : Auto (24 fps)
※
2160p, 1080p &1080i only 2160p(1080p)@24 2160p(1080p)@24 2160p(1080p)@24
2160p 2160p@60 2160p@60 2160p@60
1080p 1080p@60 1080p@60 1080p@60
1080i 1080i@60 1080i@60 1080i@60
720p 720p@60 720p@60 720p@60
576p/480p 576p/480p@60 576p/480p@60 576p/480p@60
| NOTES |
\If the TV you connected to the product does not support Movie Frame or the resolution you selected,
the message "
If no pictures are shown after selecting 'Yes', please wait for 15 seconds to return to
the previous resolution. Do you want to change the resolution?
" appears. If you select Yes, the TV's
screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution
automatically.
\If the screen stays blank after you have changed the resolution, remove all discs, and then press
and hold the @ (STOP) button on the top of the product for more than 5 seconds. The initialization
message appears on the screen, the player turns off automatically. When you turn your product on
again, all the settings will be reset. Run the Initial Settings procedure again. Then, go to Settings >
Picture > Resolution in the Menu, and select the correct resolution for your TV.
\When you run the Initial Settings procedure, re-select the language and aspect ratio (screen size and
format) only. Resetting does not affect your network settings, so you should be able to skip Network
Setup and Software Update.
\When the factory default settings are restored, all stored user BD data is deleted.
\An Ultra HD Blu-ray Disc or standard Blu-ray Disc must have the 24 frame feature for the product to
use the Movie Frame (24 fps) mode.
54 English
Appendix
Digital Output Selection
Setup PCM Bitstream
(Unprocessed)
Bitstream
(Re-encoded
DTS)
Bitstream
(Re-encoded
Dolby D)
Connection HDMI
supported
AV receiver Optical HDMI
supported
AV receiver Optical HDMI supported
AV receiver or
Optical
HDMI supported
AV receiver or
Optical
Audio Stream
on
Ultra HD
Blu-ray Disc/
Blu-ray Disc
PCM Up to PCM
7.1ch PCM 2ch PCM PCM 2ch DTS re-encoded Re-encoded
Dolby Digital *
Dolby Digital Up to PCM
7.1ch PCM 2ch Dolby Digital Dolby Digital DTS re-encoded Re-encoded
Dolby Digital *
Dolby Digital
Plus
Up to PCM
7.1ch PCM 2ch Dolby Digital
Plus Dolby Digital DTS re-encoded Re-encoded
Dolby Digital *
Dolby TrueHD Up to PCM
7.1ch PCM 2ch Dolby TrueHD Dolby Digital DTS re-encoded Re-encoded
Dolby Digital *
DTS Up to PCM
6.1ch PCM 2ch DTS DTS DTS re-encoded Re-encoded
Dolby Digital *
DTS-HD High
Resolution
Audio
Up to PCM
7.1ch PCM 2ch
DTS-HD High
Resolution
Audio
DTS DTS re-encoded Re-encoded
Dolby Digital *
DTS-HD
Master Audio
Up to PCM
7.1ch PCM 2ch DTS-HD
Master Audio DTS DTS re-encoded Re-encoded
Dolby Digital *
Audio Stream
on DVD
PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch
Dolby Digital Up to PCM
5.1ch PCM 2ch Dolby Digital Dolby Digital Dolby Digital Dolby Digital
DTS Up to PCM
6.1ch PCM 2ch DTS DTS DTS DTS
Definition for
Ultra HD
Blu-ray Disc/
Blu-ray Disc
Any
Decodes the main feature
audio and BONUSVIEW
audio stream together
into PCM audio and adds
Navigation Sound Effects.
Outputs only the main feature
audio stream so that your
AV receiver can decode the
audio bitstream.
You will not hear BONUSVIEW
audio or Navigation Sound
Effects.
Decodes the main
feature audio and
BONUSVIEW
audio stream
together into PCM
audio and adds
Navigation Sound
Effects, then re-
encodes the PCM
audio into DTS
bitstream.
Decodes the main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects,
then re-encodes
the PCM audio
into Dolby Digital
bitstream or PCM.
* If the Source Stream is 2ch or mono, "Re-encoded Dolby D" Settings are not applied. Output will be
PCM 2ch.
Ultra HD Blu-ray Discs and standard Blu-ray Discs may include three audio streams :
- Main Feature Audio : The audio soundtrack of the main feature.
- BONUSVIEW audio : An additional soundtrack such as the director or actor's commentary.
- Navigation Sound Effects : When you choose some menu navigation, Navigation Sound Effects may
sound. Navigation Sound Effects are different on each Ultra HD Blu-ray Disc/Blu-ray Disc.
55 English
07 Appendix
Troubleshooting
Before requesting service, please try the following solutions.
PROBLEM SOLUTION
No operation can be performed with
the remote control.
• Check the batteries in the remote control. They may need
replacing.
• Operate the remote control at a distance of no more than 6.1m
from the product.
• Remove the batteries and hold down one or more buttons for
several minutes to drain the microprocessor inside the remote
control to reset it. Reinstall the batteries and try to operate the
remote control again.
The disc does not play. • Ensure that the disc is installed with the label side facing up.
• Check the region number of the Ultra HD Blu-ray Disc/Blu-ray
Disc/DVD.
The disc Menu does not appear. • Confirm that the disc has disc menus.
The prohibition message appears on
the screen.
• This message appears when an invalid button is pressed.
• The Ultra HD Blu-ray Disc/Blu-ray Disc/DVD's software
doesn't support the feature (e.g., angles).
• You've requested a title or chapter number or search time that
is out of range.
Play mode differs from the Setup
Menu selection.
• Some of the functions selected in the Setup Menu may
not work properly if the disc is not encoded with the
corresponding function.
The screen ratio cannot be changed. • The Screen Ratio on your Ultra HD Blu-ray Disc/Blu-ray Disc/
DVD Disc is fixed and cannot be changed.
• This is not a problem with the product.
No audio. • Make sure you have selected the correct Digital Output in the
Audio Options Menu.
The screen is blank. • If the HDMI output is set to a resolution your TV cannot
support (for example, 1080p), you may not see a picture on
your TV.
• Press the @ (STOP) button (on top panel) for more than
5 seconds with no disc inside. The initialization message
appears on the screen, and the player turns off automatically.
When you turn your product on again, all the settings will be
reset.
• When the factory default settings are restored, all stored user
BD data will be deleted.
56 English
Appendix
PROBLEM SOLUTION
Forgot password. • Press the @ (STOP) button (on the top panel) for more than
5 seconds with no disc inside. The initialization message
appears on the screen, and the player turns off automatically.
When you turn your product on again, all the settings will be
reset.
Don't use this unless absolutely necessary.
• When the factory default settings are restored, all stored user
BD data will be deleted.
The picture is noisy or distorted. • Make sure that the disc is not dirty or scratched.
• Clean the disc.
No HDMI output. • Check the connection between the TV and the HDMI jack of
the product.
• Check if your TV supports the 576p/480p, 720p, 1080i,
1080p, or 2160p HDMI input resolution.
• To view video in the HDMI 720p, 1080i, 1080p or 2160p
output mode, you must use a high speed (category 2) HDMI
cable.
Abnormal HDMI output appears on
the screen.
• If random noise appears on the screen, it means that TV
does not support HDCP (High-bandwidth Digital Content
Protection).
If you experience other problems. • Go to the table of contents and find the section of the user
manual that contains information about the feature you are
having the problem with, and then follow the procedure again.
• If you still cannot resolve the problem, please contact your
nearest Samsung authorised service Centre.
Play Multimedia on network
devices
You can see folders shared on
network devices, but cannot see the
files.
• The multimedia list only shows Video, Photo, and Music files.
Other types of files are not displayed.
57 English
07 Appendix
PROBLEM SOLUTION
Video plays intermittently. • Check if the network is stable.
• Check if the network cable is properly connected and if the
network is not overloaded.
• The wireless connection between the DLNA compatible
device and the product is unstable.
Check the connection.
The Network connection between
the product and the PC is unstable.
• IP addresses within the same subnetwork should be unique.
If they are not, IP interference can cause this phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
BD-LIVE
This product cannot connect to the
BD-LIVE server.
• Test whether the network connection is working using the
Network Status function. (See page 22)
• Check whether a USB memory device is connected to the
product.
• The memory device must have at least 1GB of free space to
accommodate the BD-LIVE service.
You can check the available size in BD Data Management. (See
page 22)
• See if the BD-Live Internet Connection option is set to
Allow(All).
• If all above fails, contact the content provider or update the
product to the latest firmware.
When using the BD-LIVE service, an
error occurs.
• The memory device must have at least 1GB of free space to
accommodate the BD-LIVE service.
You can check the available size in BD Data Management.
(See page 22)
| NOTE |
\When the factory default settings are restored, all stored user BD data will be deleted.
58 English
Appendix
Disc and Format Compatibility
Disc types and contents your product can play
Media Disc Type Details
VIDEO
Ultra HD
Blu-ray Disc Ultra HD BD-ROM format.
Blu-ray Disc
3D Blu-ray
Disc
BD-ROM or BD-RE/-R recorded in the BD-RE format.
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
VCD 1.1
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have been
recorded and finalised, or a USB storage media containing DivX, MKV,
MP4 or VCD 1.1 contents.
MUSIC
CD-RW/-R
DVD-RW/-R
BD-RE/-R
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB
storage media containing MP3 or WMA contents.
PHOTO
CD-RW/-R
DVD-RW/-R
BD-RE/-R
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB
storage media containing JPEG contents.
| NOTES |
\The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording
conditions.
\If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
\Your product will not play content that has been recorded on a DVD-R at a bit-rate that exceeds
10 Mbps.
\Your product will not play content that has been recorded on a BD-R or USB device at a Bit rate that
exceeds 25 Mbps.
\Playback may not work for some types of discs, or when you use specific functions, such as angle
change and aspect ratio adjustment. Information about the discs is written in detail on the disc box.
Please refer to this if necessary.
\When you play a BD-J title, loading may take longer than a normal title or some functions may perform
slowly.
Disc types your product cannot play
• HD DVD
• DVD-ROM/PD/
MV, etc
• DVD-RAM
• Super Audio CD
(except CD layer)
• DVD-RW (VR mode)
• CVD/CD-ROM/CDV/
CD-G/CD-I/LD
(CD-Gs play audio only,
not graphics.)
• 3.9 GB DVD-R for
Authoring.
59 English
07 Appendix
Region Code
Both products and discs are coded by region.
These regional codes must match for a disc to
play. If the codes do not match, the disc will not
play.
The Region Number for this product is displayed
on the rear panel of the product.
Disc Type Region
Code Area
Blu-ray
Disc
A
North America, Central
America, South America,
Korea, Japan, Taiwan,
Hong Kong and South
East Asia.
B
Europe, Greenland,
French territories, Middle
East, Africa, Australia and
New Zealand.
C
India, China, Russia,
Central and South Asia.
DVD-
VIDEO
1
The U.S., U.S. territories
and Canada
2
Europe, Japan, the
Middle East, Egypt, Africa,
Greenland
3
Taiwan, Korea, the
Philippines, Indonesia,
Hong Kong
4
Mexico, South America,
Central America, Australia,
New Zealand, Pacific
Islands, Caribbean
5
Russia, Eastern Europe,
India, North Korea,
Mongolia
6
China
Logos of Discs the product can play
Blu-ray Disc 3D Blu-ray Disc
BD-LIVE Ultra HD Blu-ray Disc
PAL broadcast
System in U.K.,
France, Germany,
etc.
DivX
60 English
Appendix
Supported Formats
Supported Video File Formats
File
Extension Container Video Codec Resolution Frame rate
(fps)
Bit rate
(Mbps) Audio Codec
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.mov
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.flv
*.vob
*.svi
*.m2ts
*.mts
*.divx
AVI
MKV
ASF
MP4
3GP
MOV
FLV
VRO
VOB
PS
TS
SVAF
H.264 BP/MP/HP
4096x2160
4096X2160:
30
3840X2160:
60
60
Dolby Digital
LPCM
ADPCM
(IMA, MS)
AAC
HE-AAC
WMA
DD+
MPEG(MP3)
DTS
(Core , LBR)
G.711
(A-Law, μ-Law)
HEVC
(H.265 -
Main, Main10,
Main4:2:2 10)
60 80
Motion JPEG 30 80
MVC
1920x1080
60 20
DivX 3.11 / 4 / 5 /
6
MPEG4 SP/ASP
Window Media
Video v9(VC1)
MPEG2
MPEG1
Microsoft MPEG-4
v1, v2, v3
30 20
Window Media
Video v7(WMV1),
v8(WMV2)
H 263 Sorrenson
VP6
*.webm WebM
VP8 1920x1080 60 20
Vorbis
VP9 4096x2160
4096X2160:
30
3840X2160:
60
40
*.rmvb RMVB RV8/9/10
(RV30/40) 1920x1080 60 20 RealAudio 6
61 English
07 Appendix
`Limitations
- Even when a file is encoded by a supported
codec listed in the Video File Support table, the
file might not play if its content has a problem.
- Normal playback is not guaranteed if the file’s
container information is wrong or the file itself is
corrupted.
- Playing back contents having higher rates than
the base bit rate/frame rate may cause stuttering
sound or video.
- The Seek (Jump) function is not available if the
file’s index table is damaged.
- When you playback a file remotely through a
network connection, video playback may stutter
depending on the network conditions.
- Some USB/Digital camera devices may not be
compatible with the product.
- The RMVB format is supported only by models
made for China and Hong Kong.
- HEVC codec is supported only for MKV, MP4.
and TS containers.
- The DivX codec is not supported by models
made for the U.S. or Canada.
`Video decoder
- Supports up to H.264 Level 4.1. (Does not
support FMO/ASO/RS)
- Does not support VC1/AP/L4.
- CODECs except for WMV v7, v8, MSMPEG4
v3, MVC, VP6
1) Below 1280 x 720 : 60 frames max.
2) Above 1280 x 720 : 30 frames max.
- Does not support GMC 2 or higher.
- Supports SVAF Top/Bottom, Side by Side, Left/
Right view sequence type(2 ES)
- Supports BD MVC Spec.
`Audio decoder
- Supports WMA 10 PRO (Up to 5.1).
- Does not support WMA lossless audio.
- Also supports the M2 profile.
- The RealAudio 10 lossless format is not
supported by models made for China and Hong
Kong.
- Does not support QCELP/AMR NB/WB.
- Supports vorbis (Up to 2ch).
- Supports DD+ (Up to 7.1ch)
- The DTS LBR codec is supported only for MKV
/ MP4 / TS containers.
Ğ Supported DivX subtitle file formats
*.ttxt, *.smi, *.srt, *.sub, *.txt
| NOTE |
\Some DivX, MKV and MP4 format discs may
not play, depending on their video resolution
and frame rate.
Supported Subtitle File Formats
Name File
Extension
External
MPEG-4 Timed text .ttxt
SAMI .smi
SubRip .srt
SubViewer .sub
Micro DVD .sub or .txt
SubStation Alpha .ssa
Advanced
SubStation Alpha .ass
Powerdivx .psb
SMPTE-TT Text .xml
Internal
Xsub AVI
SubStation Alpha MKV
Advanced
SubStation Alpha MKV
SubRip MKV
VobSub MKV
MPEG-4 Timed text MP4
TTML in smooth
streaming MP4
SMPTE-TT TEXT MP4
SMPTE-TT PNG MP4
62 English
Appendix
Supported Music File Formats
File
Extension
Type Codec Support Range
*.mp3 MPEG
MPEG1
Audio
Layer 3
-
*.m4a
*.mpa
*.aac
MPEG4 AAC -
*.flac FLAC FLAC Supports up to
two channels.
*.ogg OGG Vorbis Supports up to
two channels.
*.wma WMA WMA
For WMA 10 Pro
supports up to
M2 profile and 5.1
channels.
WMA lossless
audio is not
supported.
*.wav wav wav -
*.mid
*.midi midi midi
Type 0, type 1
and Seek is not
supported.
Only available with
USB.
*.ape ape ape -
*.aif
*.aiff AIFF AIFF -
*.m4a ALAC ALAC -
Supported Picture File Formats
File Extension Type Resolution
*.jpg
*.jpeg JPEG 15360x8640
*.webp PNG 4096x4096
*.bmp BMP 4096x4096
*.mpo MPO 15360x8640
Notes on the USB connection
• Your player supports USB storage media, MP3
players, digital cameras, and USB card readers.
• Some USB/digital camera devices may not be
compatible with the player.
• Your player supports the FAT16, FAT32, and
NTFS files systems.
• Connect USB devices directly to the player's
USB port. Connecting through a USB cable
may cause compatibility problems.
• Inserting more than one memory device into
a multi-card reader may cause the reader to
operate improperly.
• The player does not support the PTP (Peer to
Peer) protocol.
• Do not disconnect a USB device while it is
transferring or recording data.
• The bigger the image resolution, the longer the
image takes to display.
• This player cannot play MP3 files with DRM
(Digital Rights Management) downloaded from
commercial sites.
• Your player only supports video that is under
30fps (frame rate).
• Your player only supports USB Mass Storage
Class (MSC) devices such as thumb drives and
USB HDD. (HUB is not supported.)
• Certain USB HDD Devices, multi-card readers
and thumb drives may not be compatible with
this player.
• If some USB devices require excessive power,
they may be limited by the circuit safety device.
63 English
07 Appendix
• If playback from a USB HDD is unstable, provide
additional power by plugging the HDD into a
wall socket.
If the problem continues, contact the USB HDD
manufacturer.
• SAMSUNG is not responsible for any data file
damage or data loss.
•
Your player does not support NTFS compressed,
sparse, or encrypted files.
- You can repair or format a USB device on
your Desktop PC. (MS-Windows OS only)
AVCHD (Advanced Video Codec High
Definition)
• This player can play back AVCHD format discs.
These discs are normally recorded and used in
camcorders.
• The AVCHD format is a high definition digital
video camera format.
• The MPEG-4 AVC/H.264 format compresses
images with greater efficiency than the
conventional image compressing format.
• Some AVCHD discs use the "x.v.Colour" format.
This player can play back AVCHD discs that use
"x.v.Colour" format.
• "x.v.Colour" is a trademark of Sony Corporation.
• "AVCHD" and the AVCHD logo are trademarks
of Matsushita Electronic Industrial Co., Ltd. and
Sony Corporation.
| NOTES |
\Some AVCHD format discs may not play,
depending on the recording conditions.
AVCHD format discs need to be finalised.
\"x.v.Colour" offers a wider Colour range than
normal DVD camcorder discs.
64 English
Appendix
Compliance and Compatibility Notice
NOT ALL discs are compatible
• Subject to the restrictions described below and those noted throughout this Manual, including the Disc
Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded
commercial Ultra HD BD-ROM, BD-ROM, DVD-VIDEO, and Audio CD (CD-DA); BD-RE/-R,
DVD-RW/-R; and CD-RW/-R.
• Discs other than the above cannot and/or are not intended to be played by this player. And some of
the above discs may not play due to one or more reasons provided below.
• Samsung cannot assure that this player will play every disc bearing the Ultra HD BD-ROM,
BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player
may not respond to all operating commands or operate all features of every disc. These and other disc
compatibility and player operation issues with new and existing format discs are possible because:
- Ultra HD Blu-ray/Blu-ray is a new and evolving format and this player may not operate all features
of Ultra HD Blu-ray Discs/Blu-ray Discs because some features may be optional, additional features
may have been added to the Ultra HD Blu-ray Disc/Blu-ray Disc format after the production of this
player, and certain available features may be subject to delayed availability;
- not all new and existing disc format versions are supported by this player;
- new and existing disc formats may be revised, changed, updated, improved and/or supplemented;
- some discs are produced in a manner that allows specific or limited operation and feature during
playback;
- some features may be optional, additional features may have been added after the production of this
player or certain available features may be subject to delayed availability;
- some discs bearing the Ultra HD BD-ROM, BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R,
DVD+RW/+R and CD-RW/-R logos may still be non-standardized discs;
- some discs may not be played depending on their physical state or recording conditions;
- problems and errors can occur during the creation of Ultra HD Blu-ray Disc, Blu-ray Disc, or DVD
disc software and/or during the manufacture of discs;
- this player operates differently than a standard DVD player or other AV equipment; and/or
- for reasons noted throughout this user manual and for other reason(s) discovered and posted by
SAMSUNG customer care Centre.
• If you encounter disc compatibility or player operation problems, please contact SAMSUNG customer
care Centre.
You may also contact SAMSUNG customer care Centre for possible updates on this player.
• For additional information on playback restrictions and disc compatibility, refer to the Precautions,
Before Reading the user manual, Disc Types and Characteristics, and Before Playing sections of this
user manual.
• For product progressive scan output : CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO
THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS PRODUCT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTRE.
65 English
07 Appendix
Copy Protection
• Because AACS (Advanced Access Content System) is approved as content protection system for
Ultra HD Blu-ray Disc and Blu-ray Disc format, similar to use of CSS (Content Scramble System)
for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS
protected contents.
The operation of this product and restrictions on this product may vary depending on your time of
purchase as those restrictions may be adopted and/or changed by AACS after the production of this
product. Furthermore, BD-ROM Mark and BD+ are additionally used as content protection systems for
Ultra HD Blu-ray Disc and Blu-ray Disc formats, which imposes certain restrictions including playback
restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain additional information on
AACS, BD-ROM Mark, BD+, or this product, please contact SAMSUNG customer care Centre.
• Many Ultra HD Blu-ray Discs/Blu-ray Discs/DVDs are encoded with copy protection. Because of this,
you should only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected Ultra HD Blu-ray Discs/Blu-ray Discs/DVDs.
• Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use,
display, distribution, or revision of television programs, videotapes, Ultra HD Blu-ray Discs, Blu-ray
Discs, DVDs, and other materials may subject you to civil and/or criminal liability.
• Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorised copies of
some commercially-produced film and videos and their soundtracks. When a prohibited use of
an unauthorised copy is detected, a message will be displayed and playback or copying will be
interrupted.
More information about Cinavia technology is provided at the Cinavia Online Consumer Information
Centre at http://www.cinavia.com. To request additional information about Cinavia by mail, send a
postcard with your mailing address to: Cinavia Consumer Information Centre, P.O. Box 86851, San
Diego, CA, 92138, USA.
This product incorporates proprietary technology under Licence from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well
as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark
of Verance Corporation. Copyright 2004-2015 Verance Corporation. All rights reserved by Verance.
Reverse engineering or disassembly is prohibited.
Network Service Disclaimer
All content and services accessible through this device belong to third parties and are protected by
copyright, patent, trademark and/or other intellectual property laws. Such content and services are
provided solely for your personal noncommercial use. You may not use any content or services in a
manner that has not been authorised by the content owner or service provider. Without limiting the
foregoing, unless expressly authorised by the applicable content owner or service provider, you may
not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or
distribute in any manner or medium any content or services displayed through this device.
66 English
Appendix
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT WARRANT
CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE.
SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED
TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SAMSUNG
DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS
OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO
CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN
CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF ANY
CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Third party services may be terminated or interrupted at any time, and Samsung makes no representation
or warranty that any content or service will remain available for any period of time. Content and services
are transmitted by third parties by means of networks and transmission facilities over which Samsung
has no control. Without limiting the generality of this disclaimer, Samsung expressly disclaims any
responsibility or liability for any interruption or suspension of any content or service made available
through this device.
Samsung is neither responsible nor liable for customer service related to the content and services.
Any question or request for service relating to the content or services should be made directly to the
respective content and service providers.
Licences
• Manufactured under Licence from Dolby Laboratories. Dolby and the double-D
symbol are registered trademarks of Dolby Laboratories.
• For DTS patents, see http://patents.dts.com. Manufactured under Licence from
DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS-HD Master Audio is a trademark of
DTS, Inc. © DTS, Inc. All Rights Reserved.
• DivX
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are
used under licence.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com.
Find your registration code in the DivX VOD section of your device setup menu.
Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 8,656,183; 8,731,369; RE45,052.
67 English
07 Appendix
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
• Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be
trademarks of their respective owners.
• Open Source Licence Notice
- In the case of using open source software, Open Source Licences are available on the product
menu.
• Blu-ray Disc™, Blu-ray™, Ultra HD Blu-ray Disc™, Ultra HD Blu-ray™ and the logos are trademarks of
the Ultra HD Blu-ray Disc/Blu-ray Disc Association.
Wireless Models (including the frequency of 5.15GHz-5.35GHz)
• Hereby, Samsung Electronics, declares that this equipment is in compliance
with the essential requirements and other relevant provisions of Directive
1999/5/EC.
The original Declaration of Conformity may be found at
http://www.samsung.com, go to Support > Search Product Support and enter the model name.
This equipment may be operated in all EU countries. This equipment may only be used indoors.
Wireless Models (excluding the frequency of 5.15GHz-5.35GHz)
• Hereby, Samsung Electronics, declares that this equipment is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
The original Declaration of Conformity may be found at
http://www.samsung.com, go to Support > Search Product Support and enter the model
name.
This equipment may be operated in all EU countries.
68 English
Appendix
Specifications
General
Weight 1.9 kg
Dimensions 406.0 (W) X 44.7 (H) X 230.0 (D) mm
Operating Temperature
Range +5°C to +35°C
Operating Humidity Range 10 % to 75 %
USB Type A USB 3.0
DC output 5V 1A Max.
HDMI Video 2D : 2160p, 1080p, 1080i, 720p, 576p/480p
3D : 1080p, 720p
Audio PCM, Bitstream
Audio Output Digital Audio Output Optical
Network
Ethernet 100BASE - TX Terminal
Wireless LAN Built-in
Security
WEP (OPEN/SHARED)
WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)
WPS(PBC) Supported
• Network speeds equal to or below 10Mbps are not supported.
• Design and specifications are subject to change without prior notice.
• For the power supply and power consumption, refer to the label attached to the product.
• Weight and dimensions are approximate.
• An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect in the product (i.e. where you
have failed to read this user manual).
(b) you bring the unit to a repair center and there is no defect in the product (i.e. where you have
failed to read this user manual).
• The amount of such administration charge will be advised to you before any work or home visit is
carried out.
UNITED KINGDOM EIRE
This Samsung product is warranted for the period of
twelve (12) months from the original date of
purchase, against defective materials and
workmanship. In the event that warranty service is
required, you should return the product to the
retailer from whom it was purchased. However,
Samsung Authorised Dealers and Authorised
Service Centres in other EC Countries will comply
with the warranty on the terms issued to purchasers
in the country concerned. In case of difficulty, details
of our Authorised Service Centres are available from:
Samsung Electronics U.K. Ltd
Samsung Customer Support Centre
Selectapost 38, Sheffield, S97 3FJ
United Kingdom
United Kingdom
Tel : 0330 SAMSUNG (7267864)
www.samsung.com/uk/support
EIRE
Tel : 0818 717100
www.samsung.com/ie/support
@ WARRANTY CONDITIONS
1. The warranty is only valid if, when warranty
service is required, the warranty card is fully and
properly completed and is presented with the
original invoice or sales slip or confirmation, and
the serial number on the product has not been
defaced.
2. Samsung’s obligations are limited to the repair or,
at its discretion, replacement of the product or
the defective part.
3. Warranty repairs must be carried out by
Authorised Samsung Dealers or Authorised
Service Centres. No re-imbursement will be made
for repairs carried out by non Samsung Dealers
and, any such repair work and damage to the
products caused by such repair work will not be
covered by this warranty.
4. This product is not considered to be defective in
materials nor workmanship by reason that it
requires adaptation in order to conform to
national or local technical or safety standards in
force in any Country other than the one for which
the product was originally designed and
manufactured. This warranty will not cover, and
no re-imbursement will be made for such
adaptation nor any damage which may result.
5. This warranty covers none of the following:
a) Periodic check ups, maintenance and repair or
replacement of parts due to normal wear and
tear.
b) Cost relating to transport, removal or
installation of the product.
c) Misuse, including the faiure to use this product
for its normal purposes or incorrect installation.
d) Damage caused by Lightning, Water, Fire, Acts
of God, War, Public Disturbances, incorrect
mains voltage, improper ventilation or any
other cause beyond the control of Samsung.
6. This warranty is valid for any person who legally
acquired possession of the product during the
warranty period.
7. The consumers statutory rights in any applicable
national legislation whether against the retailer
arising from the purchase contract or otherwise
are not affected by this warranty. Unless there is
national legislation to the contrary, the rights
under this warranty are the consumers sole rights
and Samsung, its subsidiaries and distributors
shall not be liable for indirect or consequential
loss or any damage to records, compact discs,
videos or audio taper or any other related
equipment or material.
SAMSUNG ELECTRONICS (U.K.) LTD.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these
items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office,
for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
For information on Samsung’s environmental commitments and product specific regulatory obligations e.g.
REACH visit: samsung.com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/data_corner.html
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of
with other household waste at the end of their working life. Where marked, the chemical symbols
Hg
,
Cd
or
Pb
indicate
that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and
recycle them through your local, free battery return system.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care centre.
© 2016 Samsung Electronics Co., Ltd. All rights reserved.
Country Contact Centre Web Site
U.K 0330 SAMSUNG (7267864) www.samsung.com/uk/
support
EIRE 0818 717100 www.samsung.com/ie/
support
GERMANY
0180 6 SAMSUNG bzw.
0180 6 7267864*
(*0,20 €/Anruf aus dem dt. Festnetz, aus
dem Mobilfunk max. 0,60 €/Anruf)
www.samsung.com/de/
support
FRANCE 01 48 63 00 00 www.samsung.com/fr/
support
ITALIA 800-SAMSUNG (800.7267864) www.samsung.com/it/support
SPAIN 34902172678 www.samsung.com/es/
support
PORTUGAL 808 20 7267 www.samsung.com/pt/
support
LUXEMBURG 261 03 710
www.samsung.com/be_fr/
support
NETHERLANDS
0900-SAMSUNG (0900-7267864)
(€ 0,10/Min)
www.samsung.com/nl/
support
BELGIUM 02-201-24-18
www.samsung.com/be/
support (Dutch)
www.samsung.com/be_fr/
support (French)
NORWAY 815 56480 www.samsung.com/no/
support
DENMARK 70 70 19 70 www.samsung.com/dk/
support
FINLAND 030-6227 515 www.samsung.com/fi/support
SWEDEN 0771 726 7864 (0771-SAMSUNG) www.samsung.com/se/
support
POLAND
801-172-678* lub +48 22 607-93-33 *
* (koszt połączenia według taryfy operatora)
www.samsung.com/pl/
support
HUNGARY 0680SAMSUNG (0680-726-786)
0680PREMIUM (0680-773-648)
www.samsung.com/hu/
support
Country Contact Centre Web Site
AUSTRIA
0800-SAMSUNG (0800-7267864)
[Only for Premium HA] 0800-366661
[Only for Dealers] 0810-112233
www.samsung.com/at/
support
SWITZERLAND 0800 726 78 64 (0800-SAMSUNG)
www.samsung.com/ch/
support (German)
www.samsung.com/ch_fr/
support (French)
CZECH 800 - SAMSUNG (800-726786) www.samsung.com/cz/
support
SLOVAKIA 0800 - SAMSUNG (0800-726 786) www.samsung.com/sk/
support
CROATIA 072 726 786 www.samsung.com/hr/
support
BOSNIA 055 233 999 www.samsung.com/support
MONTENEGRO 020 405 888 www.samsung.com/support
SLOVENIA 080 697 267 (brezplačna številka) www.samsung.com/si
SERBIA 011 321 6899 www.samsung.com/rs/
support
BULGARIA *3000 Цена в мрежата
0800 111 31 , Безплатна телефонна линия
www.samsung.com/bg/
support
ROMANIA
*8000 (apel in retea)
08008-726-78-64 (08008-SAMSUNG)
Apel GRATUIT
www.samsung.com/ro/
support
CYPRUS 8009 4000 only from landline, toll free
www.samsung.com/gr/
support
GREECE
80111-SAMSUNG (80111 726 7864)
only from land line (+30) 210 6897691
from mobile and land line
LITHUANIA 8-800-77777 www.samsung.com/lt/support
LATVIA 8000-7267 www.samsung.com/lv/
support
ESTONIA 800-7267 www.samsung.com/ee/
support