Samsung WD80N645OOW User Manual
Displayed below is the user manual for WD80N645OOW by Samsung which is a product in the Washer Dryers category. This manual has pages.
Related Manuals
Washing Machine
User manual
WD90N6***** / WD80N6*****
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 1 2018/2/22 14:39:52
2 English
Contents
Contents
Safety information 4
What you need to know about the safety instructions 4
Important safety symbols 4
Important safety precautions 5
Instructions about the WEEE 15
Installation 16
What’s included 16
Installation requirements 18
Step-by-step installation 20
Before you start 28
Initial settings 28
Laundry guidelines 28
Detergent drawer guidelines 31
Operations 34
Control panel 34
Simple steps to start 36
Cycle overview 38
Special features 42
Settings 44
SmartThings 45
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 2 2018/2/22 14:39:52
English 3
Contents
Maintenance 50
Eco drum clean 50
Smart Check 51
Using Dry course 52
Emergency drain 53
Cleaning 54
Mesh lter 55
Recovery from freezing 58
Care against an extended time of disuse 58
Troubleshooting 59
Checkpoints 59
Information codes 62
Specications 66
Fabric care chart 66
Protecting the environment 67
Specication sheet 68
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 3 2018/2/22 14:39:53
4 English
Safety information
Safety information
Congratulations on your new Samsung washing machine. This manual contains important
information on the installation, use and care of your appliance. Please take some time to read
this manual to take full advantage of your washing machine’s many benets and features.
What you need to know about the safety instructions
Please read this manual thoroughly to ensure that you know how to safely and efciently
operate the extensive features and functions of your new appliance. Please store the manual
in a safe location close to the appliance for future reference. Use this appliance only for its
intended purpose as described in this instruction manual.
Warnings and Important Safety Instructions in this manual do not cover all possible
conditions and situations that may occur. It is your responsibility to use common sense,
caution and care when installing, maintaining and operating your washing machine.
Because the following operating instructions cover various models, the characteristics of your
washing machine may differ slightly from those described in this manual and not all warning
signs may be applicable. If you have any questions or concerns, contact your nearest service
centre or nd help and information online at www.samsung.com.
Important safety symbols
What the icons and signs in this user manual mean:
WARNING
Hazards or unsafe practices that may result in severe personal injury, death and/or property
damage.
CAUTION
Hazards or unsafe practices that may result in personal injury and/or property damage.
NOTE
Indicates that a risk of personal injury or material damage exists.
Read the instructions
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 4 2018/2/22 14:39:53
English 5
Safety information
These warning signs are here to prevent injury to yourself and others.
Please follow them explicitly.
After reading this manual, store it in a safe place for future reference.
Read all instructions before using the appliance.
As with any equipment that uses electricity and moving parts, potential hazards exist. To
safely operate this appliance, familiarize yourself with its operation and exercise care when
using it.
Important safety precautions
WARNING
To reduce the risk of re, electric shock, or injury to persons when
using your appliance, follow basic precautions, including the following:
1. This appliance is not to be used by persons (including children)
with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
2. For use in Europe: This appliance can be used by children aged from
8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
3. Children should be supervised to ensure that they do not play with
the appliance.
4. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualied persons in
order to avoid a hazard.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 5 2018/2/22 14:39:53
6 English
Safety information
Safety information
5. The new hose-sets supplied with the appliance are to be used and
that old hose-sets should not be reused.
6. For appliances with ventilation openings in the base, that a carpet
must not obstruct the openings.
7. For use in Europe: Children of less than 3 years should be kept
away unless continuously supervised.
8. CAUTION:
In order to avoid a hazard due to inadvertent resetting of
the thermal cut-out, this appliance must not be supplied through an
external switching device, such as a timer, or connected to a circuit
that is regularly switched on and off by the utility.
9. The tumble dryer is not to be used if industrial chemicals have been
used for cleaning.
10. The lint trap has to be cleaned frequently, if applicable.
11. Lint must not to be allowed to accumulate around the tumble dryer.
(not applicable for appliances intended to be vented to the exterior
of the building)
12. Adequate ventilation has to be provided to avoid the back ow of
gases into the room from appliances burning other fuels, including
open res.
13. Do not dry unwashed items in the tumble dryer.
14. Items that have been soiled with substances such as cooking oil,
acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes
and wax removers should be washed in hot water with an extra
amount of detergent before being dried in the tumble dryer.
15. Items such as foam rubber (latex foam), shower caps, waterproof
textiles, rubber backed articles and clothes or pillows tted with
foam rubber pads should not be dried in the tumble dryer.
16. Fabric softeners, or similar products, should be used as specied by
the fabric softener instructions.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 6 2018/2/22 14:39:53
English 7
Safety information
17. The nal part of a tumble dryer cycle occurs without heat (cool
down cycle) to ensure that the items are left at a temperature that
ensures that the items will not be damaged.
18. Remove all objects from pockets such as lighters and matches.
19. WARNING:
Never stop a tumble dryer before the end of the drying
cycle unless all items are quickly removed and spread out so that
the heat is dissipated.
20. Exhaust air must not be discharged into a ue which is used for
exhausting fumes from appliances burning gas or other fuels.
21. The appliance must not be installed behind a lockable door, a sliding
door or a door with a hinge on the opposite side to that of the
tumble dryer, in such a way that a full opening of the tumble dryer
door is restricted.
22. WARNING:
The appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is
regularly switched on and off by a utility.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 7 2018/2/22 14:39:54
8 English
Safety information
Safety information
Critical installation warnings
WARNING
The installation of this appliance must be performed by a qualied technician or service
company.
• Failure to do so may result in electric shock, re, an explosion, problems with the product,
or injury.
The appliance is heavy, therefore take care when lifting it.
Plug the power cord into an AC 220 - 240 V / 50 Hz wall socket or higher and use the socket
for this appliance only. Never use an extension cord.
• Sharing a wall socket with other appliances using a power strip or extending the power
cord may result in electric shock or re.
• Ensure that the power voltage, frequency, and current are the same as those of the
product specications. Failure to do so may result in electric shock or re. Plug the power
plug into the wall socket rmly.
Remove all foreign substances such as dust or water from the power plug terminals and
contact points using a dry cloth on a regular basis.
• Unplug the power plug and clean it with a dry cloth.
• Failure to do so may result in electric shock or re.
• Plug the power plug into the wall socket so that the cord is running towards the oor.
If you plug the power plug into the socket in the opposite direction, the electric wires
within the cable may be damaged and this may result in electric shock or re.
Keep all packaging materials out of the reach of children as these may be dangerous.
• If a child places a bag over its head, it may suffocate.
When the appliance, power plug or power cord is damaged, contact your nearest service
centre.
This appliance must be properly grounded.
Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
• This may result in electric shock, re, an explosion, or problems with the product.
• Never plug the power cord into a socket that is not grounded correctly and make sure
that it is in accordance with local and national regulations.
Do not install this appliance near a heater or any inammable material.
Do not install this appliance in a humid, oily or dusty location, or in a location exposed to
direct sunlight or water (rain drops).
Do not install this appliance in a location exposed to low temperatures.
• Frost may cause the tubes to burst.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 8 2018/2/22 14:39:54
English 9
Safety information
Do not install this appliance in a location where gas may leak.
• This may result in electric shock or re.
Do not use an electric transformer.
• This may result in electric shock or re.
Do not use a damaged power plug, damaged power cord, or loose wall socket.
• This may result in electric shock or re.
Do not pull or excessively bend the power cord.
Do not twist or tie the power cord.
Do not hook the power cord over a metal object, place a heavy object on the power cord,
insert the power cord between objects, or push the power cord into the space behind the
appliance.
• This may result in electric shock or re.
Do not pull the power cord when unplugging the power plug.
• Unplug the power plug by holding the plug.
• Failure to do so may result in electric shock or re.
This appliance should be positioned so that the power plug, the water supply taps, and the
drain pipes are accessible.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 9 2018/2/22 14:39:54
10 English
Safety information
Safety information
Installation cautions
CAUTION
This appliance should be positioned in such a way that the power plug is easily accessible.
• Failure to do so may result in electric shock or re due to electric leakage.
Install your appliance on a solid, level oor that can support its weight.
• Failure to do so may result in abnormal vibrations, movement, noise, or problems with
the product.
Critical usage warnings
WARNING
If the appliance is ooded, turn off the water & power supplies immediately and contact your
nearest service centre.
• Do not touch the power plug with wet hands.
• Failure to do so may result in electric shock.
If the appliance generates a strange noise, a burning smell, or smoke, unplug the power plug
immediately and contact your nearest service centre.
• Failure to do so may result in electric shock or re.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without
touching the power plug. Do not touch the appliance or power cord.
• Do not use a ventilating fan.
• A spark may result in an explosion or re.
Do not let children play in or on the washing machine. In addition, when disposing of the
appliance, remove the washing machine door lever.
• If trapped inside the product, children may suffocate to death.
Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the
washing machine before using it.
Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or
other inammable or explosive substances.
• This may result in electric shock, re, or an explosion.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 10 2018/2/22 14:39:54
English 11
Safety information
Do not open the washing machine door by force while it is operating (high-temperature
washing/drying/spinning).
• Water owing out of the washing machine may result in burns or cause the oor to be
slippery. This may result in injury.
• Opening the door by force may result in damage to the product or injury.
Do not insert your hand under the washing machine while an operation is in progress.
• This may result in injury.
Do not touch the power plug with wet hands.
• This may result in electric shock.
Do not turn the appliance off by unplugging the power plug while an operation is in progress.
• Plugging the power plug into the wall socket again may cause a spark and result in
electric shock or re.
Do not let children or the inrm use this washing machine without proper supervision. Do
not let children climb in or onto the appliance.
• This may result in electric shock, burns or injury.
Do not insert your hand or a metal object under the washing machine while it is operating.
• This may result in injury.
Do not unplug the appliance by pulling the power cord. Always grip the plug rmly and pull
it straight out of the outlet.
• Damage to the power cord may cause a short-circuit, re and/or electric shock.
Do not attempt to repair, disassemble, or modify the appliance yourself.
• Do not use a fuse (such as copper, steel wire, etc.) other than a standard fuse.
• When the appliance needs to be repaired or reinstalled, contact your nearest service
centre.
• Failure to do so may result in electric shock, re, problems with the product, or injury.
If the water supply hose comes loose from the water tap and oods the appliance, unplug the
power plug.
• Failure to do so may result in electric shock or re.
Unplug the power plug when the appliance is not being used for long periods of time or
during a thunder or lightning storm.
• Failure to do so may result in electric shock or re.
If any foreign substance enters into the appliance, unplug the power plug and contact you
nearest Samsung Customer Service.
• This may result in electric shock or re.
Do not let children (or pets) play in or on your washing machine. The washing machine door
does not open easily from the inside and children may be seriously injured if trapped inside.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 11 2018/2/22 14:39:54
12 English
Safety information
Safety information
Usage cautions
CAUTION
When the washing machine is contaminated by a foreign substance such as detergent, dirt,
food waste, etc., unplug the power plug and clean the washing machine using a damp, soft
cloth.
• Failure to do so may result in discolouration, deformation, damage, or rust.
The front glass may be broken by a strong impact. Take care when using the washing
machine.
• If the glass is broken, it may result in injury.
After a water supply failure or when reconnecting the water supply hose, open the water tap
slowly.
Open the water tap slowly after a long period of non-use.
• The air pressure in the water supply hose or the water pipe may damage a product part
or result in a water leak.
If a draining error occurs during an operation, check if there is a draining problem.
• If the washing machine is used when it is ooded because of a draining problem, it may
result in electric shock or re.
Insert the laundry into the washing machine completely so that the laundry does not get
caught in the door.
• If laundry gets caught in the door, it may result in damage to the laundry or the washing
machine, or result in a water leak.
Turn the water supply off when the washing machine is not being used.
Ensure that the screws on the water supply hose connector are properly tightened.
• Failure to do so may result in property damage or injury.
Ensure that the rubber seal and front door glass are not contaminated by a foreign substance
(e.g. waste, thread, hair, etc.).
• If a foreign substance is caught in the door or the door is not completely closed, it may
cause a water leak.
Open the water tap and check if the water supply hose connector is rmly tightened and that
there is no water leak before using the product.
• If the screws on the water supply hose connector are loose, it may result in a water leak.
The product you have purchased is designed for domestic use only.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 12 2018/2/22 14:39:54
English 13
Safety information
Using the product for business purposes qualies as a product misuse. In this case, the
product will not be covered by the standard warranty provided by Samsung and no
responsibility can be attributed to Samsung for malfunctions or damages resulting from such
misuse.
Do not stand on the appliance or place objects (such as laundry, lighted candles, lighted
cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
• This may result in electric shock, re, problems with the product, or injury.
Do not spray volatile material such as insecticide onto the surface of the appliance.
• As well as being harmful to humans, this may result in electric shock, re or problems
with the product.
Do not place objects that generate electromagnetic elds near the washing machine.
• This may result in injury due to a malfunction.
Water drained during a high-temperature wash or drying cycle is hot. Do not touch the water.
• This may result in burns or injury.
Do not wash, spin, or dry water-proof seats, mats, or clothing (*) unless your appliance has a
special cycle for washing these items.
(*): Woollen bedding, rain covers, shing vests, ski pants, sleeping bags, diaper covers, sweat
suits, and bicycle, motor cycle and car covers, etc.
• Do not wash thick or hard mats even if the washing machine mark is on the care label.
This may result in injury or damage to the washing machine, walls, oor, or clothing due
to abnormal vibrations.
• Do not wash throw rugs or doormats with rubber backing. The rubber backing may come
off and stick to inside the drum, and this may result in malfunction such as a drainage
error.
Do not operate the washing machine when the detergent drawer is removed.
• This may result in electric shock or injury due to a water leak.
Do not touch the insides of the drum during or just after drying as it is hot.
• This may result in burns.
Do not insert your hand into the detergent drawer.
• This may result in injury as your hand may be caught by the detergent input device.
• The liquid detergent guide (applicable models only) is not used for powder detergent.
Remove the guide when using powder detergent.
Do not place any objects (such as shoes, food waste, animals) other than laundry into the
washing machine.
• This may result in damage to the washing machine, or injury and death in the case of
pets due to the abnormal vibrations.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 13 2018/2/22 14:39:54
14 English
Safety information
Safety information
Do not press the buttons using sharp objects such as pins, knifes, ngernails, etc.
• This may result in electric shock or injury.
Do not wash laundry contaminated by oils, creams or lotions usually found in skincare shops
or massage clinics.
• This may cause the rubber seal to become deformed and result in a water leak.
Do not leave metal objects such as safety pins, hair pins or bleach in the drum for long
periods of time.
• This may cause the drum to rust.
• If rust starts appearing on the surface of the drum, apply a (neutral) cleansing agent to
the surface and use a sponge to clean it. Never use a metal brush.
Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry
contaminated by dry cleaning detergent.
• This may result in spontaneous combustion or ignition due to the heat from the oxidation
of the oil.
Do not use water from water cooling/heating devices.
• This may result in problems with the washing machine.
Do not use natural hand-washing soap for the washing machine.
• If it hardens and accumulates inside the washing machine, it may result in problems with
the product, discolouration, rust, or bad odours.
Place socks and brassieres in a washing net and wash them with the other laundry.
Do not wash large laundry items such as bedding in the washing net.
• Failure to do so may result in injury due to abnormal vibrations.
Do not use hardened detergent.
• If it accumulates inside the washing machine, it may result in a water leak.
Make sure that the pockets of all the clothing items to be washed are empty.
• Hard, sharp objects such as coins, safety pins, nails, screws, or stones can cause extensive
damage to the appliance.
Do not wash clothing with large buckles, buttons or other heavy metal objects.
Sort the laundry by color on the basis of its colorfastness and select the recommended cycle,
water temperature and additional functions.
• This may result in discoloration or fabric damage.
Take care that children’s ngers are not caught in the door when you close it.
• Failure to do so may result in injury.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 14 2018/2/22 14:39:54
English 15
Safety information
Critical cleaning warnings
WARNING
Do not clean the appliance by spraying water directly onto it.
Do not use the a strong acidic cleaning agent.
Do not use benzene, thinner or alcohol to clean the appliance.
• This may result in discolouration, deformation, damage, electric shock or re.
Before cleaning or performing maintenance, unplug the appliance from the wall socket.
• Failure to do so may result in electric shock or re.
Instructions about the WEEE
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that
the product and its electronic accessories (e.g. charger, headset,
USB cable) should not be disposed of with other household waste
at the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they
purchased this product, or their local government ofce, for details
of where and how they can take these items for environmentally
safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for
disposal.
For information on Samsung’s environmental commitments and product speci regulatory
obligations e.g. REACH visit: samsung.com/uk/aboutsamsung/samsungelectronics/
corporatecitizenship/data_corner.html
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 15 2018/2/22 14:39:54
16 English
Installation
Installation
Follow these instructions carefully to ensure proper installation of the washing machine and
to prevent accidents when doing laundry.
What’s included
Make sure all the parts are included in the product package. If you have a problem with
the washing machine or the parts, contact a local Samsung customer centre or the retailer.
12
06
08
07
01
02
03
04
05
10
09
11
01 Release lever 02 Detergent drawer 03 Control panel
04 Door 05 Drum 06 Pump lter
07 Emergency drain tube 08 Filter cover 09 Worktop
10 Power plug 11 Drain hose 12 Levelling feet
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 16 2018/2/22 14:39:55
English 17
Installation
Spanner Bolt caps Hose guide
Cold water hose Hot water hose Liquid detergent guide
Cap Fixer
NOTE
• Bolt caps : The provided number (3 to 6) of bolt caps depends on the model.
• Hot water hose: Applicable models only.
• Liquid detergent guide: Applicable models only.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 17 2018/2/22 14:39:55
18 English
Installation
Installation
Installation requirements
Electrical supply and grounding
• AC 220-240 V / 50 Hz fuse or circuit
breaker is required
• Use an individual branch circuit specic
to the washing machine
To ensure proper grounding, the washing
machine comes with a power cord featuring
a three-prong grounding plug for use in a
properly installed and grounded outlet.
Check with a qualied electrician or
serviceperson if you are not sure about the
grounding.
Do not modify the provided plug. If it does
not t the outlet, call a qualied electrician
to install a proper outlet.
WARNING
• Do NOT use an extension cord.
• Use only the power cord that comes
with the washing machine.
• Do NOT connect the ground wire to
plastic plumbing, gas lines, or hot water
pipes.
• Improperly connected grounding
conductors may cause electric shock.
Water supply
A proper water pressure for this washing
machine is between 50 kPa and 800 kPa.
Water pressure less than 50 kPa may cause
the water valve not to close completely. Or,
it may take longer to ll the drum, causing
the washing machine to turn off. Water taps
must be within 120 cm from the rear of the
washing machine so that the provided inlet
hoses reach the washing machine.
To reduce the risk of leaks:
• Make sure water taps are easily
accessible.
• Turn off the taps when the washing
machine is not in use.
• Check for any leaks at the water inlet
hose ttings on a regular basis.
CAUTION
Before using the washing machine for the
rst time, check all connections at the water
valve and taps for any leaks.
Drain
Samsung recommends a standpipe in
height of 60-90 cm. The drain hose must
be connected through the hose clip to the
standpipe, and the standpipe must fully
cover the drain hose.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 18 2018/2/22 14:39:55
English 19
Installation
Flooring
For best performance, the washing
machine must be installed on a solid oor.
Wood oors may need to be reinforced
to minimize vibration and/or unbalanced
loads. Carpeting and soft tile surfaces are
not a good resistance to vibrations and may
cause the washing machine to move slightly
during the spin cycle.
CAUTION
Do NOT install the washing machine on a
platform or a poorly supported structure.
Water temperature
Do not install the washing machine in areas
where water may freeze as the washing
machine always retains some water in its
water valves, pumps, and/or hoses. Frozen
water left in the connection parts may
cause damage to belts, the pump, and other
components of the washing machine.
Alcove or closet installation
Minimum clearance for stable operation:
Sides 25 mm
Top 25 mm
Rear 50 mm
Front 550 mm
If both the washing machine and a dryer
are installed in the same location, the front
of the alcove or closet must have at least
a 550 mm unobstructed air opening. Your
washing machine alone does not require a
specic air opening.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 19 2018/2/22 14:39:56
20 English
Installation
Installation
Step-by-step installation
STEP 1 Select a location
Location requirements:
• Solid, level surface without carpeting or ooring that may obstruct ventilation
• Away from direct sunlight
• Adequate room for ventilation and wiring
• The ambient temperature is always higher than the freezing point (0 ˚C)
• Away from a heat source
STEP 2 Remove the shipping bolts
Unpack the product package and remove all
shipping bolts.
1. Loosen all shipping bolts on the rear of
the machine using the supplied spanner.
2. Fill the holes with the supplied plastic
bolt caps.
Keep the shipping bolts for future use.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 20 2018/2/22 14:39:56
English 21
Installation
A
3. Close all plastic bolt caps on the rear of
the washing machine.
CAUTION
Do not remove the screw (A) that xes the
hose clip.
WARNING
Packaging materials can be dangerous to children. Dispose all packaging material (plastic
bags, polystyrene, etc.) out of children’s reach.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 21 2018/2/22 14:39:56
22 English
Installation
Installation
STEP 3 Adjust the levelling feet
1. Gently slide the washing machine into
position. Excessive force may damage
the levelling feet.
2. Level the washing machine by manually
adjusting the levelling feet.
3. When levelling is complete, tighten the
nuts using the spanner.
STEP 4 Connect the water hose
The provided hose adaptor may differ with the model. This step guides you through
connecting the connector-type adaptor. If you are provided with the screw-type adaptor, go
to 7.
A
B
Connect the water hose to the water tap.
1. Remove the adaptor (A) from the water
hose (B).
2. Use a Philips screwdriver to loosen four
screws on the adaptor.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 22 2018/2/22 14:39:57
English 23
Installation
C
3. Holde the adaptor and turn part (C) in
the arrow direction to loosen it by 5 mm
(*).
C
4. Insert the adaptor into the water tap,
and tighten the screws while lifting up
the adaptor.
5. Turn part (C) in the arrow direction to
tighten it.
E
6. While holding down part (E), connect the
water hose to the adaptor. Then, release
part (E). The hose ts into the adaptor
with a clicking sound.
7. If you are using a screw type of water
tap, use the provided screw-type
adaptor to connect to the water tap as
shown.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 23 2018/2/22 14:39:57
24 English
Installation
Installation
8. Connect the other end of the water
hose to the inlet valve on the back of
the washing machine. Turn the hose
clockwise to tighten.
9. Open the water tap and check if there
are any leaks around the connection
areas. If there are water leaks, repeat the
steps above.
WARNING
Stop using the washing machine if there is a water leak, and contact a local Samsung service
centre. Otherwise, this may cause electric shock.
CAUTION
Do not stretch the water hose by force. If the hose is too short, replace the hose with a
longer, high-pressure hose.
NOTE
• After connecting the water hose to the adaptor, check if it is connected properly by
pulling the water hose downwards.
• Use a popular type of water taps. If the tap is square-shaped or too big, remove the
spacer ring before inserting the tap into the adaptor.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 24 2018/2/22 14:39:57
English 25
Installation
For models with an additional hot water inlet:
1. Connect the red end of the hot water
hose to the hot water inlet on the back
of the machine.
2. Connect the other end of the hot water
hose to the hot water tap.
Aqua hose (applicable models only)
A
The aqua hose alerts users of a risk of water
leaks. It senses the water ow and turns red
on the centre indicator (A) in case of a leak.
NOTE
The end of the aqua stop hose must be tted to the water tap and not the machine.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 25 2018/2/22 14:39:58
26 English
Installation
Installation
STEP 5 Position the drain hose
The drain hose can be positioned in three ways:
A
Over the edge of a wash basin
The drain hose must be placed at a height
of between 60 cm and 90 cm (*) from the
oor. To keep the spout of the drain hose
bent, use the supplied plastic hose guide (A).
Secure the guide to the wall using a hook to
ensure stable drainage.
ln a drain pipe
The drain pipe should be between 60 cm
and 90 cm high (*). It is advisable to use
a 65 cm high vertical pipe. Make sure the
drain hose is connected to the stand pipe at
a slant.
Drain standpipe requirements:
• Minimum diameter of 5 cm
• Minimum carry-away capacity of
60 litres per minute
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 26 2018/2/22 14:39:58
English 27
Installation
In a sink drain pipe branch
The drain pipe branch mush be above the
sink siphone so that the end of the hose is
at least 24 in. (60 cm) above the ground.
(*) : 24 in. (60 cm)
STEP 6 Power on
Plug the power cord into a wall socket featuring an AC 220-240 V / 50 Hz approved electrical
outlet protected by a fuse or circuit breaker. Then, press Power to turn on the washing
machine.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 27 2018/2/22 14:39:58
28 English
Before you start
Before you start
Initial settings
Run Calibration (recommended)
Calibration ensures accurate weight detection by the washing machine. Make sure the drum
is empty before running Calibration.
1. Power off, and then power on the washing machine.
2. Hold down Temp. and Delay End + simultaneously for 3 seconds to enter Calibration
mode. The “Cb” message appears.
3. Press Start/Pause (Hold to Start) to run the Calibration cycle.
4. The drum will rotate clockwise and counter-clockwise for about 3 minutes.
5. When the cycle is complete, “0” appears on the display and the washing machine will turn
off automatically. The washing machine is now ready for use.
Laundry guidelines
STEP 1 Sort
Sort the laundry according to these criteria:
• Care Label: Sort the laundry into cottons, mixed bres, synthetics, silks, wools, and rayon.
• Colour: Separate whites from colours.
• Size: Mixing different-sized items together in the drum improves the washing
performance.
• Sensitivity: Wash delicate items separately for pure, new woollen items, curtains, and silk
items. Check the labels on the items.
NOTE
Make sure to check the care label on the clothing, and sort them accordingly before starting
the wash.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 28 2018/2/22 14:39:58
English 29
Before you start
STEP 2 Empty pockets
Empty all the pockets of your laundry items
• Metal objects such as coins, pins, and buckles on clothing may damage other laundry
items as well as the drum.
Turn clothing with buttons and embroideries inside out
• If pants or jacket zippers are open while washing, the drum may be damaged. Zippers
should be closed and xed with a string.
• Clothing with long strings may become entangled with other clothes. Make sure to tie the
strings before starting the wash.
STEP 3 Use a laundry net
• Brassieres (water washable) must be placed in a laundry net. Metal parts of the brassieres
may break through and tear other laundry items.
• Small, light clothing such as socks, gloves, stockings, and handkerchiefs may become
caught around the door. Place them inside a ne laundry net.
• Do not wash the laundry net by itself without other laundry. This may cause abnormal
vibrations that could move the washing machine and result in injury.
STEP 4 Prewash (if necessary)
Select the Prewash option for the selected course if the laundry is heavily soiled. Do not use
the Prewash option when detergent is manually added into the drum or if applying liquid
detergent.
STEP 5 Determine the load capacity
Do not overload the washing machine. Overloading may cause the washing machine to not
wash properly. For the load capacity for the type of clothing, see page 37.
NOTE
When washing bedding or bedding covers, the wash time may be lengthened or the spin
efciency may be reduced. For bedding or bedding covers, the recommended maximum spin
cycle speed is 800 rpm, and the load capacity is 2.0 kg or less.
CAUTION
• Unbalanced laundry may reduce the spinning performance.
• Make sure the laundry is fully inserted in the drum and not caught in the door.
• Do not slam the door. Close the door gently. Otherwise, the door may not be closed
properly.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 29 2018/2/22 14:39:58
30 English
Before you start
Before you start
STEP 6 Apply a proper detergent type
The type of detergent depends on the type of fabric (cotton, synthetic, delicate items, wool),
colour, wash temperature, and degree of soiling. Make sure to use the laundry detergent that
is designed for automatic washing machines.
NOTE
• Follow the detergent manufacturer’s recommendations based on the weight of the
laundry, the degree of soiling, and the hardness of the water in your local area. If you are
not sure about the water hardness, contact a local water authority.
• Do not use detergent that tends to be hardened or solidied. This detergent may remain
after the rinse cycle, blocking the drain outlet.
• If too many bubbles occur during a cycle, a message of ‘Sud’ will be displayed.
CAUTION
When washing wool using the WOOL cycle, use a detergent dedicated to wool items. If
used with the WOOL cycle, powder detergent may remain on the laundry and discolour the
laundry.
Laundry capsules
To get the best results from using laundry capsules, please follow these instructions.
1. Put the capsule in the bottom of the
empty drum towards the rear.
2. Put the laundry in the drum on top of
the capsule.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 30 2018/2/22 14:39:59
English 31
Before you start
CAUTION
For cycles using cold water or cycles that complete in less than one hour, the capsule may not
dissolve completely.
Detergent drawer guidelines
The washing machine provides a three-compartment dispenser: the left compartment for the
main wash, the centre for fabric softeners, and the right for the preliminary wash.
A
01 Prewash compartment: Apply
prewash detergent or starch.
02 Main-wash compartment: Apply
main-wash detergent, water softener,
soaking detergent, bleach, and/or stain
removers.
03 Softener compartment: Apply
additives such as fabric softener. Do not
exceed the max line (A).
CAUTION
• Do not open the detergent drawer while the washing machine is operating.
• Do not use the following types of detergent:
- Tablet or capsule types
- Ball or net types
• To prevent the compartment clogging, concentrated or highly-enriched agents (fabric
softener or detergent) must be diluted with water before being applied.
• Before moving the washing machine, make sure to empty the detergent drawer that
might contain detergent and/or fabric softener. The content in the drawer may spill out
on the oor.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 31 2018/2/22 14:39:59
32 English
Before you start
Before you start
To apply washing agents to the detergent drawer
1. Slide open the detergent drawer.
2. Apply laundry detergent to the
main-wash compartment as instructed
or recommended by the manufacturer.
To use liquid detergent, see page 33.
3. Apply fabric softener to the softener
compartment. Do not exceed the max
line.
4. If you want to prewash, apply
prewash detergent to the prewash
compartment as instructed or
recommended by the manufacturer.
5. Close the detergent drawer.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 32 2018/2/22 14:39:59
English 33
Before you start
CAUTION
• Do not apply powder detergent to the
liquid detergent guide.
• Concentrated fabric softener must be
diluted with water before applied.
• Do not apply main-wash detergent to
the softener compartment.
To use liquid detergent (applicable models only)
A
First insert the provided liquid detergent
container in the main-wash
compartment. Then, apply liquid detergent
to the container below the marked max line
(A).
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 33 2018/2/22 14:40:00
34 English
Operations
Operations
Control panel
10
02
09
08
11
12
03 04 05 06
01
07
01 Cycle Selector Turn the dial to select a cycle.
02 Display
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
For buttons and icons, refer to the corresponding page.
03 Temp. Press to change the water temperature for the current cycle.
04 Rinse Press to change the rinse count for the current cycle. You can set the
rinse count to a max of 5, depending on the cycle.
05 Spin
Press to change the spinning speed for the current cycle. The
revolutions per minute (RPM) differs with the model.
• Rinse Hold(No indicator): The nal rinse process is suspended so
that the laundry remains in the water. To unload the laundry, run
a drain or spin process.
- To use the Rinse Hold option, press Spin repeatedly until all
rpm numeric indicators turn off. Not available for the DRAIN/
SPIN cycle.
• No Spin : The drum does not rotate after the nal drain process.
- To use the No Spin option, press Spin repeatedly until the No
Spin ( ) indicator turns on.
• Spin Only: To run the Spin Only cycle, press Spin for 3 seconds.
When the cycle time and spinning speed appear, press Spin
repeatedly until a desired spinning speed is selected. Then,
press and hold Start/Pause (Hold to Start) to start the cycle. The
spinning time depends on the selected cycle.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 34 2018/2/22 14:40:01
English 35
Operations
06 Dry Option
Press to select a drying level: Cupboard > Time Dry (30 min > 1:00 h
> 1:30 h > 2:00 h > 2:30 h > 3:00 h > 3:30 h > 4:00 h > 4:30 h) > No
Dry
• Cupboard Dry: Use this option to dry laundry such as cotton,
underwear, and linen.
• Time Dry: Use this option to dry the laundry for the specied
period of time depending on the bres, amount of laundry
quantity and moisture.
• No Dry: Use this option if not using a drying cycle.
07 Delay End
Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined
by the machine’s internal logic. For example, this setting is useful
for programming your machine to nish a wash at the time you
normally return home from work.
• Press to choose a preset unit of hours.
08 Bubble Soak
Press to activate/deactivate the Bubble Soak function. This function
helps remove a wide variety of stubborn stains.
• Bubble Soak helps remove a variety of stubborn stains.
• With Bubble Soak selected, laundry is thoroughly soaked in
water bubbles for effective washing.
• Bubble Soak is available with and adds up to 30 minutes to these
cycles: Cotton, Synthetics, Daily Wash and Speed Wash+Dry.
09 Smart Control
Press to activate/deactivate the Smart Control function. When the
Smart Control function is activated, you can control your washing
machine using your mobile device. For more information, see the
SmartThings section on page 45.
10 Options Press to select the options. Availability of the options depends on
the cycle.
11 Power Press to turn on/off the washing machine.
12 Start/Pause
(Hold to Start)
Press and hold to start an operation, or press to stop an operation
temporarily.
For more information on the options, see the Special features section.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 35 2018/2/22 14:40:01
36 English
Operations
Operations
Simple steps to start
Standard steps
4
4
1
6
2
3
5
1. Press Power to turn on the washing machine.
2. Select a cycle in the cycle panel.
3. Change the cycle settings (Temp., Rinse, and Spin) as necessary.
4. Press Options or Dry Option to add desired options. Available options differ depending on
the selected cycle.
5. The machine supports the options of Bubble Soak and Smart Control for easy access. To
use an option item, press the corresponding button.
6. Press and hold Start/Pause (Hold to Start).
To change the cycle during operation
1. Press Start/Pause (Hold to Start) to stop operation.
1. Select a different cycle.
2. Press Start/Pause (Hold to Start) again to start the new cycle.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 36 2018/2/22 14:40:01
English 37
Operations
Drying only
Follow these steps to dry damp laundry or laundry that has just nished washing.
2
1
3
1. Press Power to turn on the washing machine.
2. Press Dry Option repeatedly until a desired dry level is set.
3. Press and hold Start/Pause (Hold to Start).
To change the course during operation
1. Press Start/Pause (Hold to Start) to stop operation.
2. Select a different cycle.
3. Press Start/Pause (Hold to Start) again to start the new cycle.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 37 2018/2/22 14:40:01
38 English
Operations
Operations
Cycle overview
Standard cycles
Cycle Description & Max load (kg)
COTTON
• For cottons, bed linens, table linens, underwear, towels,
or shirts. The washing time and the rinse count are
automatically adjusted according to the load.
Max
SYNTHETICS • For blouses or shirts that are made of polyester (diolen,
trevira), polyamide (perlon, nylon), or the like. 4.0
DELICATES
• For sensitive fabrics as rayon, viscose and synthetics
blended ber.
• For best performance, use liquid detergent.
2.0
OUTDOOR CARE
• For outdoor clothes, skiwear, and sportswear that are
made of functional materials such as spandex, stretch,
and micro-bre
2.0
RINSE+SPIN • Featuring an additional rinse process after applying
fabric softener to the laundry. Max
WOOL
• Specic for machine-washable wool for loads less than
2.0 kg.
• The wool cycle features ne pulsating and soaking
to protect the wool bres from shrinkage/distortion.
• A neutral detergent is recommended.
2.0
ECO DRUM CLEAN
• Cleans the drum by removing dirt and bacteria from it.
• Cleans the rubber door gasket by removing dirt from
the gasket.
• Perform once every 40 washes with no detergent or
bleach applied. It noties automatically after every 40
washes.
• Make sure the drum is empty.
• Do not use any cleaning agents for cleaning the drum.
-
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 38 2018/2/22 14:40:02
English 39
Operations
Cycle Description & Max load (kg)
15’ QUICK WASH
For lightly soiled items in less than 2.0 kg that you want to
wash quickly.
• Use less than 20 g of detergent. Using more than 20 g
of detergent may leave detergent residue.
• For liquid detergent, use a max of 20 ml of liquid
detergent.
2.0
DAILY WASH • For everyday items such as underwear and shirts. 4.0
SUPER ECO WASH • Low temperature ecobubble cycle helps reduce power
consumption. 4.0
Dry cycles
Cycle Description & Max load (kg)
COTTON DRY • For general drying. 5.0
SYNTHETICS DRY • A low temperature drying cycle for heat-sensitive
garments. 3.0
AIR WASH
• This cycle is useful for removing bad odours. Turning
the Cycle Selector cycles through the following
operating modes.
1.0
SPEED WASH+DRY
• Additional drying may be needed depending on the
item’s volume and thickness.
NOTE
Maximum load (4.5 kg) was tested in compliance with IEC
standard (4 Cotton pillows, 3 Cotton towels, 5 easy care
pillows, 10 easy care shirts).
4.5
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 39 2018/2/22 14:40:02
40 English
Operations
Operations
Options
Option Description
Intensive • For badly soiled laundry. The operation time for each cycle is
longer than normal.
Pre Wash • This will add a preliminary washing cycle before the main
wash cycle.
Dry Option
Option Description
Cupboard dry
• Select to dry laundry automatically by detecting the amount
and weight of the laundry. Select this to dry cotton clothing
such as cotton trousers, T-shirts, and cotton underwear.
Time Dry • Use to dry the laundry for a specied period of time
according to the material, load, and moisture.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 40 2018/2/22 14:40:03
English 41
Operations
Delay End
You can set the washing machine to nish your wash automatically at a later time, choosing a
delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the time
the wash will nish.
1. Select a cycle with necessary settings.
2. Press Delay End (or the +/- button) repeatedly until a desired end time is set.
3. Press and hold Start/Pause (Hold to Start). The Delay End indicator blinks and the
washing machine tumbles the drum to sense the weight of the load if load sensing is
preset for the selected cycle. When complete, it displays your set time with the timer
running.
4. To cancel the Delay End, restart the washing machine by pressing Power.
Real-life case
You want to nish a two-hour cycle 3 hours later from now. For this, you add the Delay End
option to the current cycle with the 3-hour setting, and Press and hold Start/Pause (Hold to
Start) at 2:00 p.m. Then, what happens? The washing machine starts operating at 3:00 p.m.,
and ends at 5:00 p.m. Provided below is the time line for this example.
2:00 pm
Set the Delay End to 3 hours
3:00 pm
Start
5:00 pm
End
Load sensor
The load sensor icon lights up when you select a cycle that supports load sensing. Some
cycles may not support loading sensing. Once you start the cycle, the icon blinks or stays
solid during the load sensing process, and turns off when the process is complete.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 41 2018/2/22 14:40:04
42 English
Operations
Operations
Special features
AddWash
When the AddWash indicator is on, you can stop operation of the machine and put
additional laundry or softener into the drum. The Add Door opens by more than 130° for
easy access.
1. Press Start/Pause (Hold to Start) to stop
operation.
2. Press the upper area of the Add Door
until you hear a clicking sound to unlock.
Pull the handle of the Add Door to open.
3. Open the Add Door and put additional
laundry or softener into the drum.
4. Push the Add Door until you hear a
clicking sound to close.
5. Press and hold Start/Pause (Hold to
Start) to resume operation.
CAUTION
Do not put excessive force on the Add Door.
It may break.
NOTE
The water inside the drum does not leak if the Add Door is closed properly. Water drops may
form around the window, but they do not leak from inside the drum.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 42 2018/2/22 14:40:04
English 43
Operations
CAUTION
• Do not open the Add Door if suds have formed inside the drum that rise above the level
of the Add Door.
• Do not attempt to open the Add Door while the machine is operating without rst
pressing Start/Pause (Hold to Start). Please note that the Add Door can be opened
unintentionally (without pressing Start/Pause (Hold to Start)) when the wash is complete.
• Do not add an excessive load through the Add Door. Performance may be degraded.
• Do not use the lower area of the Add Door as a handle. Your ngers may be caught.
• Make sure that no laundry is caught in the Add Door.
• Keep your pets out of the washing machine, especially the Add Door.
• When using hot water for the wash, the Add Door may appear to leak water after
opening and closing the Add Door. This is normal, simply because steam emerging from
the open Add Door has cooled and formed water drops on the surface.
• When the Add Door closes, the door seals up and no water can leak. However, you
may encounter what appears to be water leak around the door - some residual water
remaining around the Add Door may form water drops. This is normal.
• Neither the main door or the Add Door can opened when the water temperature is over
50 ˚C. If the water level inside the drum is over a certain point, the main door cannot be
opened.
• If an information code of “DDC” appears on the display, see the Information codes section
for further actions.
• Keep the Add door and its surroundings clean at all times. Debris or detergent on or
around the seals of the Add door may cause a leak.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 43 2018/2/22 14:40:05
44 English
Operations
Operations
Settings
Child Lock
To prevent children or infants from
accidentally starting or setting the washing
machine, Child Lock locks all buttons except
for the Power button.
To activate Child Lock
• Press and hold - and + (of the Delay End
option) simultaneously for 3 seconds.
Then, press and hold Start/Pause (Hold
to Start) to activate. The door locks and
the Child Lock indicator turns on.
To deactivate Child Lock temporarily
You can deactivate Child Lock temporarily
for 1 minute. The door is unlocked for 1
minute and the Child Lock indicator blinks.
• Press and hold - and + (of the Delay End
option) simultaneously for 3 seconds.
NOTE
• If you open the door 1 minute or more
after deactivating Child Lock, an alarm
sounds for up to 2 minutes.
• If you close the door within 2 minutes,
the door locks and Child Lock is
reactivated. If you do not close the door
or the door is not properly closed, the
alarm keeps sounding for 2 minutes.
• To add laundry after activating Child
Lock, rst deactivate Child Lock or
restart the washing machine.
To cancel the Child Lock
• Press and hold - and + (of the Delay End
option) simultaneously for 3 seconds to
deactivate, and then press and hold the
buttons again for 3 seconds to cancel
Child Lock. The door unlocks and the
Child Lock indicator turns off.
Sound On/Off
You can turn on or off the sound from the
washing machine. When this function is set
to Off, the AddWash alarm, the melody of
cycle completion, and the power-off beep
will not sound. However, the other sounds
stay active.
• To mute the sound, press and hold Dry
Option for 3 seconds.
• To unmute the sound, press and hold
again for 3 seconds.
• Your setting will be kept even after
restarting the machine.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 44 2018/2/22 14:40:05
English 45
Operations
SmartThings
Wi-Fi connection
On your smartphone, go to the Settings and turn on the wireless connection and select an AP
(Access Point).
NOTE
• This device is designed for household use only (Class B), and can be used in all residential
areas.
• This device may cause wireless interference, and neither the manufacturer or the installer
of this device can provide a safety measure of any kind.
• Recommended encryption methods are WPA/TKIP and WPA2/AES. Newly developed Wi-
Fi protocols or unapproved Wi-Fi protocols are not supported.
• The reception sensitivity of a wireless network may be affected by surrounding wireless
environments.
• If your Internet provider has registered the MAC address of your PC or the modem
module for permanent use, your Samsung washing machine fails to connect to the
Internet. If this is the case, contact your Internet provider.
• The Internet rewall may interrupt your Internet connection. If this happens, contact your
Internet provider.
• If Internet failure continues after following the measurement of your Internet provider,
contact a local Samsung retailer or service centre.
• For installing wired and wireless routers, refer to the user manual of the router you use.
• Samsung washing machine supports the Wi-Fi 2.4 GHz protocols.
• Samsung washing machine supports the IEEE802.11 b/g/n (2.4 GHz), Soft-AP protocols.
• (IEEE802.11n is recommended)
• An unapproved wired/wireless router may fail to connect to Samsung washing machine.
Download
On an app market (Google Play Store, Apple App Store, Samsung Galaxy Apps), nd the
SmartThings app with a search term of “SmartThings”. Download and install the app on your
device.
NOTE
• The SmartThings app is available on third-party devices with Android OS 6.0
(Marshmallow) or higher, Samsung devices with Android OS 5.0 (Lollipop) or higher, and
iOS devices with iOS 10.0 or higher. For iPhones, it must be iPhone 6 or higher. The app is
optimised for Samsung smartphones (Galaxy S and Note series).
• Some functions of the app may operate differently on third-party devices.
• The app is subject to change without notice for improved performance.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 45 2018/2/22 14:40:05
46 English
Operations
Operations
Log in
You must rst log into SmartThings with your Samsung account. To create a new Samsung
account, follow the instructions on the app. You don’t need a separate app to create your
account.
NOTE
If you have a Samsung account, use the account to log in. A registered Samsung smartphone
user automatically logs in.
To register your device to SmartThings
1. Make sure your smartphone is connected to a wireless network. If not, go to the Settings
and turn on the wireless connection and select an AP (Access Point).
2. Select to run SmartThings on your smartphone.
3. When a message of “A new device is found.”, select Add.
4. If no message appears, select + and select your washing machine in a list of devices
available. If your washing machine is not listed, select Device Type > Specic Device
Model, and then add your washing machine manually.
5. Register your washing machine to the SmartThings app as follows.
a.
Log into SmartThings with your Samsung account.
b.
Turn a Wi-Fi connection on.
c.
Add your washing machine to SmartThings. Make sure your washing machine is
connected to SmartThings.
d.
When registration is complete, your washing machine appears on your smartphone.
Washing Machine app
Integrated control: You can monitor and control your washing machine both at home and on
the go.
• Select the Washing Machine icon on SmartThings. The Washing Machine page appears.
• Check the operation status or notications related to your washing machine, and change
options or settings if necessary.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 46 2018/2/22 14:40:05
English 47
Operations
SmartThings
Category Checkpoint Description
Monitoring
Washing status You can check the current cycle and its
options, and the remaining cycle time.
Smart Control The Smart Control status is shown for the
washing machine.
Self Check Use this to check if the washing machine
operates normally.
Energy monitoring Use this to monitor the energy
consumption status.
Control
Start/Pause/Cancel
Select a cycle and necessary options, and
then select Start/Pause/ Cancel to start
an operation, to stop temporarily, or to
cancel the current operation.
My Favorite Add frequently used cycles and options to
My Favorite for later use.
Notication
Cycle completed Noties you the current cycle is complete.
AddWash alarm (applicable
models only) Noties you of the addition of a new load.
Remaining laundry
(applicable models only)
Noties you of any laundry left after a
cycle is complete.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 47 2018/2/22 14:40:05
48 English
Operations
Operations
Category Checkpoint Description
Q-Rator
Laundry Recipe *
You can select the fabric type, color, and
the soil level to get recommended options
and wash cycles that you can start right
away.
Laundry Planner *
You can set the desired time for a wash
cycle to nish.
After you set the desired time, you will
get a recommended cycle that will end
within the time you set, and you can start
or reserve the recommended cycle.
HomeCare Wizard *
Provides a regular report with an analysis
of the machine operation state in a user-
set frequency (every week/month).
You can use this regular report to
check your usage pattern, maintenance
requirements, and energy consumption **
for the set period of time.
* Requires ‘SmartThings’, available on Android and iOS.
Registration required.
** Indicative results only.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 48 2018/2/22 14:40:05
English 49
Operations
Open Source Announcement
The software included in this product contains open source software. You may obtain the
complete corresponding source code for a period of three years after the last shipment of
this product by sending an email to mailto:oss.request@samsung.com.
It is also possible to obtain the complete corresponding source code in a physical medium
such as a CD-ROM; a minimal charge will be required.
The following URL http://opensource.samsung.com/opensource/SMART_AT_051/seq/0 leads to
the download page of the source code made available and open source license information as
related to this product. This offer is valid to anyone in receipt of this information.
NOTE
Hereby, Samsung Electronics, declares that the radio equipment type appliance is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address: The ofcial Declaration of conformity may be
found at http://www.samsung.com, go to Support > Search Product Support and enter the
model name.
Wi-Fi max transmitter power : 20 dBm at 2.412GHz – 2.472GHz
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 49 2018/2/22 14:40:05
50 English
Maintenance
Maintenance
Keep the washing machine clean to prevent deteriorated performance and to preserve its life
cycle.
Eco drum clean
Perform this cycle regularly to clean the drum by removing bacteria from it. This cycle heats
the water between 60 °C and 70 °C, and it also removes accumulated dirt from the rubber
door gasket.
1. Press Power to turn on the washing machine.
2. Turn the Cycle Selector to select ECO DRUM CLEAN.
3. Press and hold Start/Pause (Hold to Start).
CAUTION
Do not use any cleaning agents for cleaning the drum. Chemical residue in the drum may
cause damage to the laundry or the drum of the washing machine.
ECO DRUM CLEAN reminder
• The ECO DRUM CLEAN reminder appears on the main screen once every 40 washes. It is
advisable to perform the ECO DRUM CLEAN regularly.
• When you rst see this reminder, you can ignore the reminder for 6 consecutiv washes.
From the 7th wash, the reminder no longer appears. However, it appears again on the
second 40th wash.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 50 2018/2/22 14:40:06
English 51
Maintenance
Smart Check
To enable this function, you must rst download the Samsung Smart Washer app at the Play
Store or the App Store, and install it on a mobile device featuring a camera function.
The Smart Check function has been optimised for Galaxy & iPhone series (applicable models
only).
1. When the washing machine detects an issue to check, an information code appears on the
display. To enter Smart Check mode, press and hold Rinse and Spin simultaneously for 3
seconds.
2. The washing machine starts the self-diagnosis procedure and displays an information
code if a problem is detected.
3. Run the Samsung Smart Washer app on your mobile device, and tap Smart Check.
4. Put the mobile device close to the washing machine’s display so that the smartphone
camera and the washing machine face each other. Then, the information code will be
recognised automatically by the app.
5. When the information code is recognised correctly, the app provides detailed information
about the problem with applicable solutions.
NOTE
• The function name, Smart Check, may differ depending on the language.
• If the washing machine reects light on the display, the app may fail to recognise the
information code.
• If the app fails to recognise the Smart Check code consecutively, enter the information
code manually onto the app screen.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 51 2018/2/22 14:40:06
52 English
Maintenance
Maintenance
Using Dry course
All drying options except for the Time Dry option detect the weight of the laundry in order to
display a more accurate drying time and dry the laundry more effectively.
Refer to the chart below to select the appropriate drying option according to the type and
amount of laundry and the moisture you want to leave.
Mode Drying option Usage
Load capacity(kg)
Cotton Dry Synthetics Dry
Auto
Drying Cupboard Use this option to dry laundry such
as cotton, underwear, and linen. 5 kg 3 kg
Manual
Drying Time Dry
Use this option to dry the laundry
for the specied peiod of time
depending on the bes, amount of
laundry quantity and moisture.
30 ~ 270
min. (in 30
minutes
increments).
30 ~ 270 min.
(in 30 minutes
increments).
NOTE
• The drying result may differ depending
on the selected washing cycle and the
type/amount of laundry.
• If both washing and drying cycles are
selected, the spin speed is automatically
set to enhance the drying efciency.
• In case you want to dry laundry after
a hand wash, turn the cycle selector to
select the spin cycle, and then select a
drying option for best performance.
• When drying is complete, dust from
the dry surface of the clothes may
remain on the diaphragm due to the
ironing effect that prevents wrinkles.
The dus will be washed away during the
following wash. Alternatively, you can
easily remove it with a damp towel or
cloth.
CAUTION
• Do not use the drying function after
applying a chlorine bleach agent to the
laundry during a wash or drying cycle.
Otherwise, the laundry may become
discolored or the material may be
damaged.
• Do not use the drying function for
clothing with fur lining or made from
acrylic material. This may result in the
drying function being degraded.
• Do not touch the insides of the drum or
the washing machine surface during or
just after drying as it may be hot. This
may result in burns.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 52 2018/2/22 14:40:07
English 53
Maintenance
Emergency drain
In case of a power failure, drain the water inside the drum before taking out the laundry.
A
1. Power off and unplug the washing
machine from the electrical outlet.
2. Gently press the top area of the lte
cover (A) to open.
B
3. Put an empty, spacious container around
the cover, and stretch the emergency
drain tube to the container while holding
the tube cap (B).
C
4. Open the tube cap and let water in the
emergency drain tube (C) ow into the
container.
5. When done, close the tube cap, and
reinsert the tube. Then, close the lter
cover.
NOTE
Use a spacious container because the water
in the drum may be more than expected.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 53 2018/2/22 14:40:08
54 English
Maintenance
Maintenance
Cleaning
Surface of the washing machine
Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the
washing machine.
Add Door
A
1. Open the Add Door.
2. Use a wet cloth to clean the Add Door.
- Do not use cleaning agents.
Discolouration may occur.
- Use caution when cleaning the rubber
packing and the locking mechanism
(A).
- Dust off the window area regularly.
3. Wipe up and close the Add Door until
you hear a clicking sound.
CAUTION
• Do not apply force on the Add Door. It may break.
• Do not leave the Add Door open while the machine is operating.
• Do not put heavy objects on the Add Door at any time.
• To prevent physical injury, do not touch the Add Door while the drum is rotating.
• Do not open the Add Door while the machine is operating. This may cause physical injury.
• Do not manipulate the feature panel while the Add Door is open. This may cause physical
injury or system failure.
• Do not input objects other than laundry.
• Do not input bulky items to the drum through the Add Door.
• Do not pull out the rubber packing of the Add Door when cleaning. This may cause
damage.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 54 2018/2/22 14:40:09
English 55
Maintenance
Mesh lter
Clean the mesh lter of the water hose once or twice a year.
1. Turn off the washing machine, and
unplug the power cord.
2. Close the water tap.
3. Loosen and disconnect the water hose
from the back of the washing machine.
Cover the hose with a cloth to prevent
water from gushing out.
4. Use pliers to pull out the mesh lter
from the inlet valve.
5. Submerge the mesh lter deeply in
water so that the threaded connector is
also submerged.
6. Dry the mesh lter completely in the
shade.
7. Reinsert the mesh lter into the inlet
valve, and reconnect the water hose to
the inlet valve.
8. Open the water tap.
NOTE
If the mesh lter is clogged, an information code of “4C” appears on the screen.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 55 2018/2/22 14:40:09
56 English
Maintenance
Maintenance
Pump lter
It is advisable to clean the pump lter 5 or 6 times a year to prevent its clogging. A clogged
pump lter may reduce the bubble effect.
1. Turn off the washing machine, and
unplug the power cord.
2. Drain the remaining water inside the
drum drum. See the “Emergency drain”
section.
3. Gently press the top area of the lte
cover to open.
4. Turn the pump lter knob to the left, and
drain off the remaining water.
5. Clean the pump lter using soft brushes.
Make sure the drain pump propeller
inside the lter is unclogged.
6. Reinsert the pump lter, and turn the
lter knob to the right.
NOTE
• Some pump lters feature a safety knob
that is designed to prevent accidents
by children. To open the safety knob
of the pump lter, push in and turn it
anticlockwise. The spring mechanism of
the safety knob helps open the lter.
• To close the safety knob of the pump
lter, turn it clockwise. The spring makes
a rattling sound, which is normal.
NOTE
If the pump lter is clogged, an information code of “5C” appears on the screen.
CAUTION
• Make sure the lter knob is closed properly after cleaning the lter. Otherwise, this may
cause a leak.
• Make sure the lter is inserted properly after cleaning it. Otherwise, this may cause an
operational failure or a leak.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 56 2018/2/22 14:40:09
English 57
Maintenance
Detergent Drawer
1. While holding down the release lever
inside the drawer, slide open the drawer.
2. Clean the drawer components in owing
water using a soft brush.
3. Clean the drawer recess using a soft
brush.
4. Reinsert the release lever and the Liquid
detergent guide to the drawer.
5. Slide the drawer inward to close it.
NOTE
To remove remaining detergent, perform the RINSE+SPIN cycle with the drum being empty.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 57 2018/2/22 14:40:09
58 English
Maintenance
Maintenance
Recovery from freezing
The washing machine may freeze when it drops below 0 °C.
1. Turn off the washing machine, and unplug the power cord.
2. Pour warm water over the water tap to loosen the water hose.
3. Disconnect the water hose, and soak it in warm water.
4. Pour warm water into the drum and leave it for about 10 minutes.
5. Reconnect the water hose to the water tap.
NOTE
If the washing machine still doesn’t operate normally, repeat the above steps until it operates
normally.
Care against an extended time of disuse
Avoid leaving the washing machine unused for an extended time. If this is the case, drain the
washing machine and unplug the power cord.
1. Turn the Cycle Selector to select a RINSE+SPIN.
2. Empty the drum, and press and hold Start/Pause (Hold to Start).
3. When the cycle is complete, close the water tap and disconnect the water hose.
4. Turn off the washing machine, and unplug the power cord.
5. Open the door to let air circulate through the drum.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 58 2018/2/22 14:40:10
English 59
Troubleshooting
Troubleshooting
Checkpoints
If you encounter a problem with the washing machine, rst check the table below and try the
suggestions.
Problem Action
Does not start.
• Make sure the washing machine is plugged in.
• Make sure the door is properly closed.
• Make sure the water taps are open.
• Make sure to press or tap Start/Pause (Hold to Start) to start the
washing machine.
• Make sure Child Lock
is not activated.
• Before the washing machine starts to ll, it will make a series of
clicking noises to check the door lock and does a quick drain.
• Check the fuse or reset the circuit breaker.
Water supply is
insufcient, or no
water is supplied.
• Fully open the water tap.
• Make sure the door is properly closed.
• Make sure the water supply hose is not frozen.
• Make sure the water supply hose is not kinked or clogged.
• Make sure there is sufcient water pressure.
After a cycle,
detergent remains in
the detergent drawer.
• Make sure the washing machine is running with sufcient water
pressure.
• Make sure the detergent is added to the centre of the detergent
drawer.
• Make sure the rinse cap is inserted properly.
• If using granular detergent, make sure the detergent selector is
in the upper position.
• Remove the rinse cap and clean the detergent drawer.
Excessive vibrations
or makes noise.
• Make sure the washing machine is installed on a level, solid
oor that is not slippery.
If the oor is not level, use the levelling feet to adjust the
height of the washing machine.
• Make sure the shipping bolts are removed.
• Make sure the washing machine is not contacting any other
object.
• Make sure the laundry load is balanced.
• The motor can cause noise during normal operation.
• Overalls or metal-decorated clothes can cause noise while being
washed. This is normal.
• Metal objects such as coins can cause noise. After washing,
remove these objects from the drum or lter case.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 59 2018/2/22 14:40:10
60 English
Troubleshooting
Troubleshooting
Problem Action
Does not drain and/
or spin.
• Make sure the drain hose is straightened all the way to the
drain system. If you encounter a drain restriction, call for
service.
• Make sure the debris lter is not clogged.
• Close the door and press or tap Start/Pause (Hold to Start). For
your safety, the washing machine will not tumble or spin unless
the door is closed.
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is connected to a drain system that is
not clogged.
• If the washing machine is not supplied with sufcient power,
the washing machine temporarily will not drain or spin.
As soon as the washing machine regains sufcient power, it will
operate normally.
The door does not
open.
• Press or tap Start/Pause (Hold to Start) to stop the washing
machine.
• It may take a few moments for the door lock mechanism to
disengage.
• The door will not open until 3 minutes after the washing
machine has stopped or the power turned off.
• Make sure all the water in the drum is drained.
• The door may not open if water remains in the drum. Drain the
drum and open the door manually.
• Make sure the door lock light is off. The door lock light turns off
after the washing machine has drained.
Excessive suds.
• Make sure you use the recommended types of detergent as
appropriate.
• Use high efciency (HE) detergent to prevent oversudsing.
• Reduce the detergent amount for soft water, small loads, or
lightly soiled loads.
• Non-HE detergent is not recommended.
Cannot apply
additional detergent.
• Make sure the remaining amount of detergent and fabric
softener is not over the limit.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 60 2018/2/22 14:40:10
English 61
Troubleshooting
Problem Action
Stops.
• Plug the power cord into a live electrical outlet.
• Check the fuse or reset the circuit breaker.
• Close the door and press the Start/Pause (Hold to Start) button
to start the washing machine.
For your safety, the washing machine will not tumble or spin
unless the door is closed.
• Before the washing machine starts to ll, it will make a series of
clicking noises to check the door lock and does a quick drain.
• There may be a pause or soak period in the cycle. Wait briey
and the washing machine may start.
• Make sure the mesh lter of the water supply hose at the water
taps are not clogged. Periodically clean the mesh lter.
• If the washing machine is not supplied with sufcient power,
the washing machine temporarily will not drain or spin. As soon
as the washing machine regains sufcient power, it will operate
normally.
Fills with the wrong
water temperature.
• Fully open both taps.
• Make sure the temperature selection is correct.
• Make sure the hoses are connected to the correct taps. Flush
water lines.
• Make sure the water heater is set to supply a minimum 120 °F
(49 °C) hot water at the tap. Also, check the water heater
capacity and recovery rate.
• Disconnect the hoses and clean the mesh lter. The mesh lter
may be clogged.
• While the washing machine lls, the water temperature may
change as the automatic temperature control feature checks
incoming water temperature. This is normal.
• While the washing machine lls, you may notice just hot and/or
just cold water going through the dispenser when cold or warm
temperatures are selected.
This is a normal function of the automatic temperature
control feature as the washing machine determines the water
temperature.
Load is wet at the
end of a cycle.
• Use the High or Extra High spin speed.
• Use high efciency (HE) detergent to reduce oversudsing.
• Load is too small. Small loads (one or two items) may become
unbalanced and not spin completely.
• Make sure the drain hose is not kinked or clogged.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 61 2018/2/22 14:40:10
62 English
Troubleshooting
Troubleshooting
Problem Action
Leaks water.
• Make sure the door is properly closed.
• Make sure all hose connections are tight.
• Make sure the end of the drain hose is correctly inserted and
secured to the drain system.
• Avoid overloading.
• Use high efciency (HE) detergent to prevent oversudsing.
Has odours.
• Excessive suds collect in recesses and can cause foul odours.
• Run cleansing cycles to sanitize periodically.
• Clean the door seal (diaphragm).
• Dry the washing machine interior after a cycle has nished.
No bubbles are seen
(Bubbleshot models
only).
• Overloading may screen bubbles.
• Severely contaminated laundry may not generate bubbles.
Can I open the Add
Door at any time?
• The Add Door can be opened only when the indicator
appears. However, it does not open in the following cases:
- When the boiling or drying process is running and the
internal temperature becomes high.
- If you set the Child Lock for safety reasons.
- When the drum wash or drum drying cycle is running that
does not involve additional laundry.
If a problem persists, contact a local Samsung service centre.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 62 2018/2/22 14:40:10
English 63
Troubleshooting
Information codes
If the washing machine fails to operate, you may see an information code on the screen.
Check the table below and try the suggestions.
Code Action
4C
Water is not supplied.
• Make sure the water taps are open.
• Make sure the water hoses are not clogged.
• Make sure the water taps are not frozen.
• Make sure the washing machine is operating with sufcient
water pressure.
• Make sure that the cold water tap and the hot water tap are
properly connected.
• Clean the mesh lter as it may be clogged.
NOTE
When the washer displays the “4C” code, the washer do
draining for 3 minutes. During this time, the Power button is
inoperative.
4C2
• Make sure the cold water supply hose is rmly connected to
the cold water tap.
If it is connected to the hot water tap, the laundry may be
deformed with some cycles.
5C
Water is not draining.
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is positioned correctly, depending on
the connection type.
• Clean the debris lter as it may be clogged.
• Make sure the drain hose is straightened all the way to the
drain system.
• If the information code remains, contact a customer service
centre.
DC
Operating the washer with the door open.
• Make sure the door is properly closed.
• Make sure laundry is not caught in the door.
DC1
The Main Door lock/unlock is not working properly.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service
centre.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 63 2018/2/22 14:40:10
64 English
Troubleshooting
Troubleshooting
Code Action
DC3
The Add Door lock/unlock is not working properly.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service
centre.
OC
Water is overowed.
• Restart after spinning.
• If the information code remains on the display, contact a local
Samsung service centre.
LC, LC1
Check the drain hose.
• Make sure the end of the drain hose is placed on the oor.
• Make sure the drain hose is not clogged.
• If the information code remains, contact a customer service
centre.
NOTE
When the washer displays the “LC,LC1” code, the washer do
draining for 3 minutes. During this time, the Power button is
inoperative.
FC
Check the fan motor.
• Power off and power the machine on after 2-3 minutes, and
then try again.
UB
Spinning does not work.
• Make sure laundry is spread out evenly.
• Make sure the washing machine is on a at, stable surface.
• Redistribute the load. If only one item of clothing needs
washing, such as a bathrobe or pair of jeans, the nal spin
result might be unsatisfactory, and an “UB” check message will
be shown in the display.
3C
Check the motor for operation.
• Try restarting the cycle.
• If the information code remains, contact a customer service
centre.
3CP
Check the pulsator motor for operation.
• Try restarting the cycle.
• If the information code remains, contact a customer service
centre.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 64 2018/2/22 14:40:11
English 65
Troubleshooting
Code Action
UC
The electronic control needs to be checked (Over Voltage Error).
• Check the PCB and wire harness.
• Check if power is supplied properly.
• If the information code remains, contact a customer service
centre.
Low voltage detected
• Check if the power cord is plugged in.
• If the information code remains, contact a customer service
centre.
HC
High temperature heating check
• If the information code remains, contact a customer service
centre.
1C
The Water Level sensor is not working properly.
• Try power off and restarting the cycle.
• Check WaterLevel Sensor wire harness.
• If the information code remains, contact a customer service
centre.
NOTE
When the washer displays the “1C” code, the washer do
draining for 3 minutes. During this time, the Power button is
inoperative.
8C
The MEMS sensor is not working properly.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service
centre.
AC
Check communications between main and sub PBAs.
• Try power off and restarting the cycle.
• If the information code remains, contact a customer service
centre.
AC6
Check communications between main and inverter PBAs.
• Depending on the state, the machine may automatically returns
to normal operation.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service
centre.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 65 2018/2/22 14:40:11
66 English
Troubleshooting
Troubleshooting
Code Action
DDC, ddC
This message appears when you open the Add Door without
pressing Start/Pause (Hold to Start). If this happens, do one of the
following:
• Press the Add Door to close properly. Then, press and hold
Start/Pause (Hold to Start) and try again.
• To add laundry, open the Add Door and input laundry. Close the
Add Door properly. Then, press and hold Start/Pause (Hold to
Start) to resume operation.
If any information code keeps appearing on the screen, contact a local Samsung service
centre.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 66 2018/2/22 14:40:11
English 67
Specications
Specications
Fabric care chart
The following symbols provide garment care directions. The care labels include four symbols
in this order: washing, bleaching, drying and ironing (and dry cleaning when necessary).
The use of symbols ensures consistency among garment manufacturers of domestic and
imported items. Follow the care label directions to maximize garment life and reduce laundry
problems.
Resistant material Do not iron
Delicate fabric Can be dry cleaned using any
solvent
Item can be washed at 95 ˚C Dry Clean
Item can be washed at 60 ˚C
Dry clean with perchloride,
lighter fuel, pure alcohol or
R113 only
Item can be washed at 40 ˚C Dry clean with aviation fuel,
pure alcohol or R113 only
Item can be washed at 30 ˚C Do not dry clean
Hand wash only Dry at
Dry clean only Can be hung to dry
Can be bleached in cold water Dry on clothes hanger
Do not bleach Tumble dry, normal heat
Can be ironed at 200 ˚C max Tumble dry, reduced heat
Can be ironed at 150 ˚C max Do not tumble dry
Can be ironed at 100 ˚C max
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 67 2018/2/22 14:40:17
68 English
Specications
Specications
Protecting the environment
• This appliance is manufactured from recyclable materials. If you decide to dispose of this
appliance, please observe local waste disposal regulations. Cut off the power cord so that
the appliance cannot be connected to a power source. Remove the door so that animals
and small children cannot get trapped inside the appliance.
• Do not exceed the detergent quantities recommended in the detergent manufacturer’s
instructions.
• Use stain removal products and bleaches before the wash cycle only when strictly
necessary.
• Save water and electricity by only washing full loads (the exact amount depends upon
the program used).
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 68 2018/2/22 14:40:18
English 69
Specications
Specication sheet
“ * “ Asterisk(s) means variant model and can be varied (0-9) or (A-Z).
Type Front loading washing machine
Model name WD90N64**** WD80N64****
Dimensions W600 x D600 x H850 (mm)
Water pressure 50-800 kPa
Net weight 81.0 kg 81.0 kg
Wash and spin capacity 9.0 kg 8.0 kg
Dry capacity 5.0 kg 5.0 kg
Power
consumption
Washing
and heating
220 V 2000 W
240 V 2400 W
Drying
220 V 1600 W
240 V 1900 W
Spin revolutions 1400 rpm
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 69 2018/2/22 14:40:18
70 English
Specications
Specications
A
B
C
D
E
A600 mm
B850 mm
C600 mm
D680 mm
E1115 mm
NOTE
The design and specications are subject to change without notice for quality improvement
purposes.
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 70 2018/2/22 14:40:18
English 71
Specications
Sheet of household combined washer-dries
According to Regulation (EU) No. 96/60/EC
“ * ” Asterisk(s) means variant model and can be varied (0-9) or (A-Z).
Samsung
Model Name
WD90N64****
Energy Efciency Class
A (most efcient) to G (least efcient) A
Energy Consumption
Washing, spinning, and drying kWh 6.12
Washing and spinning only kWh 1.17
Washing Performance Class
A (most efcient) to G (least efcient) A
Water Extraction Efciency Class
A (most efcient) to G (least efcient) A
Residual moisture % 44
Maximum Spin Speed rpm 1400
Capacity
Washing kg 9.0
Drying kg 5.0
Water Consumption
Washing, spinning, and drying ℓ126
Washing and spinning only ℓ54
Program time for complete operating cycle (60 ºC cotton
washing and ‘dry cotton’ drying for rated washing capacity)
Washing, spinning, and drying min 689
Washing and spinning only min 254
Programs to which the information on the
label and the Sheet relate
Wash Cotton 60 ºC + Intensive
Dry Cotton Dry
Estimatd annual consumption for a 4-person household,
always using the dries (200 cycles)
Energy Consumption kWh/yr 1224
Water Consumption ℓ25200
Estimatd annual consumption for a 4-person household,
never using the drier (200 cycles)
Energy Consumption kWh/yr 234
Water Consumption ℓ10800
Noise using standard 60°C cotton washing cycle and ‘ dry cotton’ drying cycle
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 71 2018/2/22 14:40:18
72 English
Specications
Specications
Washing
dB (A) re 1 pW
49
Spinning
dB (A) re 1 pW
73
Drying
dB (A) re 1 pW
62
The drying energy consumption data has been measured under the conditions specied in
Standard EN50229.
• First drying should be performed with 5 kg load (the load consist: 2 sheets and 6
pillowcases and 18 towels) by selecting Cotton Dry;
• Second drying should be performed with 4 kg load (the load consist: 2 sheets and 8
pillowcases and 5 towels) by selecting Cotton Dry;
(1 or 2 towels can be added or removed for setting weight.)
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 72 2018/2/22 14:40:18
English 73
Specications
Sheet of household combined washer-dries
According to Regulation (EU) No. 96/60/EC
“ * ” Asterisk(s) means variant model and can be varied (0-9) or (A-Z).
Samsung
Model Name
WD80N64****
Energy Efciency Class
A (most efcient) to G (least efcient) A
Energy Consumption
Washing, spinning, and drying kWh 5.44
Washing and spinning only kWh 1.04
Washing Performance Class
A (most efcient) to G (least efcient) A
Water Extraction Efciency Class
A (most efcient) to G (least efcient) A
Residual moisture % 44
Maximum Spin Speed rpm 1400
Capacity
Washing kg 8.0
Drying kg 5.0
Water Consumption
Washing, spinning, and drying ℓ112
Washing and spinning only ℓ48
Program time for complete operating cycle (60 ºC cotton
washing and ‘dry cotton’ drying for rated washing capacity)
Washing, spinning, and drying min 664
Washing and spinning only min 254
Programs to which the information on the
label and the Sheet relate
Wash Cotton 60 ºC + Intensive
Dry Cotton Dry
Estimatd annual consumption for a 4-person household,
always using the dries (200 cycles)
Energy Consumption kWh/yr 1088
Water Consumption ℓ22400
Estimatd annual consumption for a 4-person household,
never using the drier (200 cycles)
Energy Consumption kWh/yr 208
Water Consumption ℓ9600
Noise using standard 60°C cotton washing cycle and ‘ dry cotton’ drying cycle
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 73 2018/2/22 14:40:18
74 English
Specications
Specications
Washing
dB (A) re 1 pW
49
Spinning
dB (A) re 1 pW
73
Drying
dB (A) re 1 pW
62
The drying energy consumption data has been measured under the conditions specied in
Standard EN50229.
• First drying should be performed with 5 kg load (the load consist: 2 sheets and 6
pillowcases and 18 towels) by selecting Cotton Dry;
• Second drying should be performed with 3 kg load (the load consist: 1 sheets and 6
pillowcases and 7 towels) by selecting Cotton Dry;
(1 or 2 towels can be added or removed for setting weight.)
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 74 2018/2/22 14:40:18
Memo
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 75 2018/2/22 14:40:18
QUESTIONS OR COMMENTS?
COUNTRY CALL OR VISIT US ONLINE AT
UK 0330 SAMSUNG (7267864) www.samsung.com/uk/support
IRELAND (EIRE) 0818 717100 www.samsung.com/ie/support
DC68-03924A-01
WD90N645OOX_03924A-01_EN(Add 8kg model).indd 76 2018/2/22 14:40:19