ScreenBeam SB960MOUNT User Manual
Displayed below is the user manual for SB960MOUNT by ScreenBeam which is a product in the Mounting Kits category. This manual has pages.
Related Manuals
ScreenBeam 960 Mounting Kit
Quick Setup Guide
Catalog number: SB960MOUNT
After completing the following steps, you will be able to attach ScreenBeam 960 to most metal
surfaces magnetically. If a metal surface is not available, you may use the optional adhesive.
1. Place the magnetic mounting module onto the bottom of ScreenBeam 960.
2. Align the four screw holes of the magnetic mounting module with ScreenBeam 960’s screw holes.
3. Install the provided screws into the screw holes.
4. (Optional) If the metal surface is not available, you can put the provided adhesive onto the
mounting module as an alternative.
Magnetic mounting module (Top side up) ScreenBeam 960 (Bottom side up)
(Optional) If your display is equipped with a 5V / 2A USB port, you may use the provided USB-to-Barrel
power cable. If the USB port’s power is insufficient, please use the power adapter that came with
ScreenBeam 960.
P/N: 0530-0835-000
Optional adhesive
Optional power
TV
USB cable
Quick Setup Guide
Minimum power
requirement:5V / 2A