Seagate® Nytro® 5000
- Seagate Technology Support Services
1.0 Scope
2.0 Mechanical Information
- 2.1 Mechanical Dimensions and Weight - M.2 - 22110 Models
- 2.2 M.2 Device Plug Descriptions
  - 2.2.1 M.2 Pin-out
3.0 Interface requirements
4.0 Standards and Reference Documents

Seagate Nytro 5000 User Manual

Displayed below is the user manual for Nytro 5000 by Seagate which is a product in the Internal Solid State Drives category. This manual has pages.

Related Manuals

Seagate Nytro 5000 Manual

100810195, Rev.D

October 2017

Seagate® Nytro® 5000

PCIe® Gen 3 x4 - NVMe M.2

Product Manual

Publication number:100810195, Rev. D, October 2017

Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the

United States and/or other countries. Nytro and SeaTools are either trademarks or registered trademarks of Seagate

Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a cer-

tification mark of NIST, which does not imply product endorsement by NIST, the U.S., or Canadian governments. All

other trademarks or registered trademarks are the property of their respective owners.

No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC.

Call 877-PUB-TEK1 (877-782-8351) to request permission.

When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one

trillion bytes. Your computer’s operating system may use a different standard of measurement and report a lower

capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be

available for data storage. Actual quantities will vary based on various factors, including file size, file format, fea-

tures and application software. Actual data rates may vary depending on operating environment and other factors.

The export or re-export of hardware or software containing encryption may be regulated by the U.S. Department of

Commerce, Bureau of Industry and Security (for more information, visit www.bis.doc.gov), and controlled for

import and use outside of the U.S. Seagate reserves the right to change, without notice, product offerings or speci-

fications.

Document Revision History

Revision Date Pages affected and description of change

Rev. D October 2017 Updated Section 4.4.3 Taiwan Requirements — Taiwan RoHS.

Rev. C October 2017

Updated product image.

Updated Section 4.0 Standards and Reference Documents.

Rev. B August 2017

Changed “Peak” to “Sustained” in Table 2 Performance on page 5.

Updated Section 1.7 Environmental Conditions to include notes on storage conditions.

Rev. A June 2017 Initial release.

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 2

Contents

1.0 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.1 Models and Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

1.2 Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

1.3 Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

1.4 Power Loss Data Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

1.5 Out of Band Management (SMBus). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

1.5.1 Vital Product Data (VPD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

1.6 Environmental Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

1.6.1 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

1.7 Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.8 Endurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.0 Mechanical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.1 Mechanical Dimensions and Weight - M.2 - 22110 Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.2 M.2 Device Plug Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.2.1 M.2 Pin-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.0 Interface requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.1 PCIe features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.2 Interface Commands Supported: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.3 Log Page Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

3.4 SMART Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.0 Standards and Reference Documents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.1 Regulatory Model Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.2 Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.3 Agency and Safety Certifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.3.1 Safety Certification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.3.2 Electromagnetic Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.3.3 Electromagnetic susceptibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.3.4 Electromagnetic compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.3.5 European Union (EU) CE Marking Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

4.3.6 Australian RCM Compliance Mark. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

4.3.7 Canada ICES-003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

4.3.8 South Korean Certification Mark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

4.3.9 Morocco Commodity Mark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

4.3.10 Taiwanese BSMI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

4.3.11 FCC verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.4 Environmental protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.4.1 European Union Restriction of Hazardous Substance Law . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.4.2 China Requirements —China RoHS 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

4.4.3 Taiwan Requirements — Taiwan RoHS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

4.5 Reference Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 3

Seagate Technology Support Services

For Nytro Support, visit: http://www.seagate.com/support/by-product/ssd-and-pcie-flash/

For information regarding online support and services, visit: http://www.seagate.com/contacts/

Available services include:

Presales & Technical support

Global Support Services telephone numbers & business hours

Authorized Service Centers

For information regarding Warranty Support, visit: http://www.seagate.com/support/warranty-and-replacements/

For information regarding data recovery services, visit:

http://www.seagate.com/services-software/seagate-recovery-services/recover/

For Seagate OEM and Distribution partner and Seagate reseller portal, visit: http://www.seagate.com/partners

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 4

Scope

www.seagate.com

1.0 Scope

Seagate Nytro 5000 is a PCIe Gen 3 SSD, designed with the NVMe (Non-Volatile Memory Express) interface that delivers

leading performance, low latency, and world class reliability and endurance.

·Interface:

 PCIe Gen 3 x4 NVMe SSD

 Out of Band Management (SMBus)

management support

 See Section 1.6 for details.

·Capacities:

 400GB, 480GB, 800GB, 960GB, 1.6TB,

1.92TB

 See Section 1.2 for details.

·Components:

 3D cMLC NAND Flash Memory

·Form Factor:

 M.2 - 22110

·Power

Lower power than current Enterprise class

products (<8.25W)

Power Loss Data Protection (PLDP)

 See Section 1.4 and Section 1.5 for details.

· Shock

 Non-Operating: 1500G @ 0.5ms (Gs)

·Vibration

 Operating: 3.08 GRMS (5-800 Hz)

 Non-Operating: 3.00 GRMS (5-500 Hz)

·Certification

 CE, BSMI, KCC, C-Tick,

FCC, IC, UL, TUV, CB

· Product Compliance

 RoHS

· Reliability:

 Mean Time Between Failure (MTBF):

2 million hours

 Data Retention: 3 months @ 40°C

 Sector Sizes: 4096 and 512 bytes

 Non-recoverable Read Errors per bits read:

1 per 10E16

 See Section 1.8 for details.

· Endurance

 High Endurance models support up to 1.5

Drive Writes/day

 Light Endurance models support up to 0.3

Drive Writes/day

 See Section 1.9 for details.

· Temperature

 Operating: 0 to 70°C

(as measured by SMART)

 Non Operating: -40 to 85°C

 See Section 1.7 for details.

· Airflow



 600 LFM for 400GB and 480GB.

 830 LFM for 800GB, 960GB, 1600GB and

1920GB.

 See Section 1.7 for details.

· Performance

 Varies by capacity and endurance. See

Section 1.3 for details.

· Security

 Self encryptions available

· Warranty

 5 years limited

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 5

Scope

www.seagate.com

1.1 Product Specifications

1.2 Models and Capacity

Table 1 Nytro 5000 M.2 512 Sector Models and Capacities

Formatted

Capacity

Standard

M.2 - 22110

Models

SED

M.2 - 22110

Models

512 bytes

LBA

Count

1.3 Performance

Table 2 Performance

Specification 400GB 800GB 1600GB 480GB 960GB 1.92TB 1600GB 1920GB

Sequential Read (MB/s)

Sustained, 128KB

Sequential Write (MB/s)

Sustained, 128KB

Random Read (IOPS)

Sustained, 4KB QD64

Random Write (IOPS)

Sustained, 4KB QD64

Random 70/30 R/W (IOPS)

Sustained, 4KB QD64

NOTE More information on Performance:

In certain performance metrics, performance of lower capacities are limited

based on the number of active dies.

IOMeter: Performance results are based on IOMeter. IOMeter is available at

http://sourceforge.net/projects/iometer/. IOMeter is licensed under the

Intel Open Source License and the GNU General Public License.

Response times: Typical response times are measured under nominal

conditions of temperature and voltage as measured on a representative

sample of drives.

Measurements: Measurements are performed on the drive after the

workload reaches steady state, including all background activities required

for normal operations.

Target Application: Mixed Workloads

400GB XP400HE30002 XP400HE30012 781,422,768

800GB XP800HE30002 XP800HE30012 1,562,824,368

1600GB XP1600HE30002 XP1600HE30012 3,125,627,568

Target Application: Read-Intensive Workloads

480GB XP480LE30002 XP480LE30012 937,703,088

960GB XP960LE30002 XP960LE30012 1,875,385,008

1920GB XP1920LE30002 XP1920LE30012 3,750,748,848

2000 2000 2000 2000 2000 2000 2040 2040

1200 1200 1200 1200 1200 1200 870 870

240,000 245,000 245,000 240,000 245,000 245,000 242,000 242,000

55,000 62,000 67,000 24,000 27,000 30,000 64,000 110,000

110,000 135,000 143,000 67,000 77,000 87,000 163,000 224,000

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 6

Scope

www.seagate.com

1.4 Power Consumption

The M.2 - 22110 drive receives DC power (+3.3V) through the standard M.2 interface.

NOTE Here is more information on Power:

NVMe Autonomous Power States are not supported.

Typical power measurements are based on an average of drives tested

under nominal conditions.

Maximum power is defined as RMS over 100ms.

1.5 Power Loss Data Protection

The drives implement an energy storage solution called Power Loss Data Protection. This circuit maintains power to the

NAND while the NAND is being programmed, even if power to the system is interrupted. Power loss data protection

ensures data integrity, and prevents loss of data and the resulting errors reporting back to the host.

Table 3 DC Requirements

Supply Voltage M.2 - 22110

Voltage Tolerances - nominal (%) 3.3V ± 5%

DC Ripple/Noise 100mVpp max: 10Hz – 30MHz

Rise Time (Max*/Min)

*10% ~ 90% Nominal Voltage

5ms* /235μs

Fall Time (Min) 100μs @ 1A max discharge

Minimum Off Time 150ms

Inrush Current (Typical Peak) 1.2A for <15ms

Table 4 Power

Specification M.2

Max Operating Power (W) 8.25

Power State 1 (W) 6.0

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 7

Scope

www.seagate.com

1.6 Out of Band Management (SMBus)

The provides sub-system management data to the host over the SMBus interface at 0x6A.

Table 5 Out of Band Management (SMBus) Protocol

Command

Code

Offset

(byte) Description

00 Length of Status: Indicates number of additional bytes to read before encountering PEC. This value should always

be 6 (06h) in implementations of this version of the spec.

Status Flags (SFLGS): This field indicates the status of the NVM subsystem.

SMBus Arbitration – Bit 7 is set ‘1’ after a SMBus block read is completed all the way to the stop bit without bus

contention and cleared to ‘0’ if a SMBus Send Byte FFh is received on this SMBus slave address.

Drive Not Ready – Bit 6 is set to ‘1’ when the subsystem cannot process NVMe management commands, and the rest of

the transmission may be invalid. If cleared to ‘0’, then the NVM subsystem is fully powered and ready to respond to man-

agement commands. This logic level intentionally identifies and prioritizes powered up and ready drives over their pow-

ered off neighbors on the same SMBus segment.

Drive Functional – Bit 5 is set to ‘1’ to indicate an NVM subsystem is functional. If cleared to ‘0’, then there is an

unrecoverable failure in the NVM subsystem and the rest of the transmission may be invalid.

Reset Not Required - Bit 4 is set to ‘1’ to indicate the NVM subsystem does not need a reset to resume normal

operation. If cleared to ‘0’ then the NVM subsystem has experienced an error that prevents continued normal

operation. A controller reset is required to resume normal operation.

Port 0 PCIe Link Active - Bit 3 is set to ‘1’ to indicate the first port’s PCIe link is up (i.e., the Data Link Control and

Management State Machine is in the DL_Active state). If cleared to ‘0’, then the PCIe link is down.

Port 1 PCIe Link Active - Bit 2 is set to ‘1’ to indicate the second port’s PCIe link is up. If cleared to ‘0’, then the second

port’s PCIe link is down or not present.

Bits 1-0 shall be set to ‘1’.

SMART Warnings: This field shall contain the Critical Warning field (byte 0) of the NVMe SMART / Health Information

log. Each bit in this field shall be inverted from the NVMe definition (i.e., the management interface shall indicate a

‘0’ value while the corresponding bit is ‘1’ in the log page). See the NVMe specification for bit definitions.

If there are multiple controllers in the NVM subsystem, the management endpoint shall combine the Critical Warning

field from every controller such that a bit in this field is:

Cleared to ‘0’ if any controller in the subsystem indicates a critical warning for that corresponding bit.

Set to ‘1’ if all controllers in the NVM subsystem do not indicate a critical warning for the corresponding bit.

Composite Temperature (CTemp): This field indicates the current temperature in degrees Celsius. If a temperature

value is reported, it should be the same temperature as the Composite Temperature from the SMART log of hottest con-

troller in the NVM subsystem. The reported temperature range is vendor specific, and shall not exceed the

range -60 to +127°C. The 8 bit format of the data is shown below.

This field should not report a temperature when that is older than 5 seconds. If recent data is not available, the

NVMe management endpoint should indicate a value of 80h for this field.

Value Description

00h-7Eh Temperature is measured in degrees Celsius (0 to 126C)

7Fh 127C or higher

80h No temperature data or temperature data is more the 5 seconds old.

81h Temperature sensor failure

82h-C3h Reserved

C4 Temperature is -60C or lower

C5-FFh Temperature measured in degrees Celsius is represented in twos complement (-1 to -59C)

Percentage Drive Life Used (PDLU): Contains a vendor specific estimate of the percentage of NVM subsystem NVM life

used based on the actual usage and the manufacturer’s prediction of NVM life. If an NVM subsystem has multiple con-

trollers the highest value is returned. A value of 100 indicates that the estimated endurance of the NVM in the NVM sub-

system has been consumed, but may not indicate an NVM subsystem failure. The value is allowed to exceed 100.

Percentages greater than 254 shall be represented as 255. This value should be updated once per power-on hour and

equal the Percentage Used value in the NVMe SMART Health Log Page.

06 : 05 Reserved: Shall be set to 0000h.

07 PEC: An 8 bit CRC calculated over the slave address, command code, second slave address and returned data.

Algorithm is in SMBus Specifications.

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 8

Scope

www.seagate.com

NOTE You can find a description of sub-system management data to the host over the

SMBus interface in the NVM Expresss Management Interface 1.0.

1.6.1 Vital Product Data (VPD)

Vital Product Data (VPD) is the information that uniquely defines elements of a system. It provides the system with

information such as Part Number and Serial Number. The drives store VPD in the PCIe config space, which can be

structured to meet any customer requirements. An example of a VPD structure is shown in the following table:

08 Length of identification: Indicates number of additional bytes to read before encountering PEC.

This value should always be 22 (16h) in implementations of this version of the spec.

10 : 09 Vendor ID: The 2 byte vendor ID, assigned by the PCI SIG. Should match VID in the Identify Controller command

response. MSB is transmitted first.

30 : 11 Serial Number: 20 characters that match the serial number in the NVMe Identify Controller command response.

First character is transmitted first.

31 PEC: An 8 bit CRC calculated over the slave address, command code, second slave address and returned data.

Algorithm is in SMBus Specifications.

32+ 255 : 32

Vendor Specific: This data structure shall not exceed the maximum read length of 255 specified in the SMBus

version 3 specification. Preferably length is not greater than 32 for compatibility with SMBus 2.0, additional blocks

shall be on 8 byte boundaries.

Table 6 VPD Example

Offset Item Value

0 Large Resource Type ID String Tag(0 x02) 0x82 “Product Name”

1 Length 0x0021

3 Data ABCD Super-Fast Widget Controller”

36 Large Resource Type VPD-R Tag (0x10) 0x90

37 Length 0x0059

39 VPD Keyword “PN”

41 Length 0x08

42 Data “6181682A”

50 VPD Keyword “EC”

52 Length 0x0A

53 Data “4950262536”

63 VPD Keyword “SN”

65 Length 0x08

66 Data “00000194”

74 VPD Keyword “MN”

76 Length 0x04

77 Data “1037”

81 VPD Keyword “RV”

83 Length 0x2C

84 Data Checksum

85 Data Reserved (0x00)

128 Large Resource Type VPD-W Tag (0x11) 0x91

129 Length 0x007E

131 VPD Keyword “V1”

133 Length 0x05

134 Data “65A01”

Table 5 Out of Band Management (SMBus) Protocol (continued)

Command

Code

Offset

(byte) Description

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 9

Scope

www.seagate.com

1.7 Environmental Conditions

Table 7 Temperature and Humidity

Specification Temperature / Humidity

Temperature (°C) Operating (as measured by SMART)

Non-Operating

Temperature

Gradient Maximum

Operating

Non-Operating

Humidity Operating

Non-Operating

NOTE 1. Limited to shelf life while product is still in the shipping package.

1.7.1 Storage

You can store the drive for a maximum of 180 days in the original unopened Seagate shipping package or 60 days,

unpackaged, in the defined non-operating limits (See Table 7, Temperature and Humidity). You can extend storage to 1

year packaged or unpackaged under optimal environmental conditions (<40°C, <40% relative humidity non-

condensing, and non-corrosive environment).

NOTE Specification does not cover connection issues that might result from testing at this

level.

Operating shock: The drive, as installed for normal operation, operates

error free while subjected to intermittent shock not exceeding the

specification. Shock may be applied in the X, Y, or Z-axis. Shock is not to be

repeated more than once every 2 seconds.

Non-Operating shock: The limits of non-operating shock apply to all

conditions of handling and transportation. This includes isolated drive and

integrated drives. Shock may be applied in the X, Y, or Z-axis.

139 VPD Keyword “Y1”

141 Length 0x0D

142 Data “Error Code 26”

155 VPD Keyword “RW”

157 Length 0x61

158 Data Reserved (0x00)

255 Small Resource Type End Tag (0xF) 0x78

0 to 70

-40 to 851

30°C/hr

5%-95%

Table 8 Shock

Specification Shock

Shock - Maximum Non Operating 1500 G at 0.5 ms

Table 6 VPD Example

Offset Item Value

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 10

Scope

www.seagate.com

NOTE More information on Vibration:

Operating vibration: The drive, as installed for normal operation, shall

operate error free while subjected to specified vibration not exceeding

specification. Vibration may be applied in the X, Y, or Z-axis.

Non-Operating vibration: The limits of non-operating vibration shall

apply to all conditions of handling and transportation. This includes both

isolated drive and integrated drives. Vibration may be applied in the X, Y, or

Z-axis.

NOTE More information on Airflow:

This value is for uniform laminar flow. This might reduce by 50% in case of

turbulent air flow environment.

Airflow approach is from thermal ground screw to M-key connector. No

heat sinks are used in this specification.

Thermal throttling is activated to protect critical components from

damage. The host observes a reduction in power and therefore

performance until PCB temperature lowers. When the PCB temperature

decreases to an acceptable temperature, thermal throttling deactivates,

and performance returns to normal.

1.8 Reliability

Table 11 Reliability

Specification Reliability Data

Mean Time Between Failures (MTBF) 2 million hours

Data Retention 3 months @ 40°C

Non-recoverable Read Errors per bits read 1 per 10E16

NOTE Here is more information on Reliability:

MTBF specification is based on these assumptions for Enterprise Storage

System environments: 8760 power on hours per year, 250 power on/off

cycles per year, and nominal voltages. The drive achieves specified MTBF

when operating in an environment that ensures the case temperatures do

not exceed the temperature specifications.

Data Retention is the time that NAND retains data at maximum rated

endurance

Table 9 Vibration

Specification Vibration

Vibration - Profile Operating 3.08 GRMS (5-800 Hz)

Vibration - Profile Non-Operating 3.00 GRMS (5-500 Hz)

Table 10 Airflow Requirements

Airflow Definition Unit Ambient

Temperature 400GB/480GB 800GB/960GB/

1600GB/1920GB

Airflow Along Drive LFM 35°C600 830

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 11

Scope

www.seagate.com

1.9 Endurance

Table 12 High Capacity Models

Capacity Model SED/Standard Endurance - Drive Writes Per Day

Table 13 High Endurance Models

Capacity Model SED/Standard Endurance - Drive Writes Per Day

NOTE Endurance rating is the expected amount of host data that can be written by

product when subjected to a specified workload at a specified operating and

storage temperature over the specified product life. For the specific workload to

achieve this level of endurance, please refer to JEDEC Specification JESD218.

Terabyte Writes is defined as 1x1012 Bytes.

480GB XP480LE30002 Standard 0.3

XP480LE30012 SED 0.3

960GB XP960LE30002 Standard 0.3

XP960LE30012 SED 0.3

1920GB XP1920LE30002 Standard 0.3

XP1920LE30012 SED 0.3

400GB XP400HE30002 Standard 1.5

XP400HE30012 SED 1.5

800GB XP800HE30002 Standard 1.5

XP800HE30012 SED 1.5

1600GB XP1600HE30002 Standard 1.5

XP1600HE30012 SED 1.5

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 12

Mechanical Information

www.seagate.com

2.0 Mechanical Information

2.1 Mechanical Dimensions and Weight - M.2 - 22110 Models

Weight: 0.49 ounces, 14 grams

Z-Height: Top side z-height is 2.0mm maximum

(11) 1.5 MAX

YPE 22110-D2-M

TOP VIEW

TOP

SIDE

BOTTOM

SIDE

BOTTOM VIEW

MECHANICAL

GROUND PAD

MECHANICAL

GROUND PAD

FOR CARD EDGE

DETAIL SEE

SECTION 2.3.5

TOP SIDE

COMPONENT

AREA

BOTTOM

SIDE

COMPONENT

AREA

4 MIN 5.20 MIN

2.0 MAX

22+0.3/-0.15

110±0.15

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 13

Mechanical Information

www.seagate.com

2.2 M.2 Device Plug Descriptions

2X 0.30±0.25

0.80±0.08

GOLD FINGER TO

GOLD FINGER

2X 20°±5°

0.20 MIN

4 MIN for Top Side

Component Zone Limit

COMPONENT AREA

MECHANICAL GROUND PAD

NO COMPONENTS ALLOWED

19.85±0.10

3.80±0.15

22+0.3/-0.15

38X 2±0.15

4±0.15 for PCB

TYP. PITCH

0.50

PIN 75PIN 75 PIN 1

AREA RESERVED FOR RF

RECEPTACLES OR

COMPONENTS WHEN NO

RF RECEPTACLES USED

DATUM E

COMPONENT AREA

5.20 MIN

37X 2.50±0.15

PIN 2

PIN 74

TYP. PITCH

0.50

KƉƟŽŶĂů

ŽƩŽŵ^ŝĚĞ

Component

Zone Limit

1±0.10

Ø 6±0.10

2X R 0.50±0.15

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 14

Mechanical Information

www.seagate.com

2.2.1 M.2 Pin-out

Pin Description Description Pin

74 3.3V GND 75

72 3.3V GND 73

70 3.3V GND 71

68 N/C N/C 69

66 Module Key N/C 67

64 Module Key 65

62 63

60 61

58 MFG reserved 59

56 MFG reserved GND 57

54 N/C RefClkp 55

52 CLKREQ# (I/O)(0/3.3V) RefClkn 53

50 PERST# (I)(0/3.3V) GND 51

48 N/C PERp0 49

46 N/C PERn0 47

44 ALERT# (O) GND 45

42 SMB_DATA (I/O) PETp0 43

40 SMB_CLK (I/O) PETn0 41

38 N/C GND 39

36 N/C PERp1 37

34 N/C PERn1 35

32 N/C GND 33

30 N/C PETp1 31

28 N/C PETn1 29

26 N/C GND 27

24 N/C PERp2 25

22 N/C PERn2 23

20 N/C GND 21

18 3.3V PETp2 19

16 3.3V PETn2 17

14 3.3V GND 15

12 3.3V PERp3 13

10 LED1# PERn3 11

8 N/C GND 9

6 N/C PETp3 7

43.3V PETn3 5

23.3V GND 3

GND 1

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 15

Interface requirements

www.seagate.com

3.0 Interface requirements

3.1 PCIe features

The Seagate Nytro SSD supports NVMe spec 1.2a. Below is a table showing the supported Features, Op-code, and

whether vendor specific, mandatory, or optional.

3.2 Interface Commands Supported:

The Seagate Nytro SSD supports all the mandatory NVMe Admin and I/O command-sets in NVMe spec 1.2a. In addition,

several optional commands are also supported. Below are tables showing the Commands, Op-code, whether Admin or

IO and mandatory or optional:

Table 14 PCIe Features

Feature ID M/O Description Supported

01h M Arbitration Yes

02h M Power Management Yes

03h O LBA Range Type No

04h M Temperature Threshold Yes

05h M (Time limited) Error Recovery Yes

06h O Volatile Write Cache No

07h M Number of Queues Yes

08h M Interrupt Coalescing Yes

09h M Interrupt Vector Configuration Yes

0Ah O Write Atomicity No

0Bh M Asynchronous Event Configuration Yes

0Ch O Autonomous Power State Transition No

0Dh O Host Memory Buffer No

80h O Software Progress Marker No

81h O Host Identifier No

82h O Reservation Notification Mask No

83h O Reservation Persistence No

C0h VS System Time Yes

C1h VS Test Unit Ready Yes

C2h VS Media Life Left Threshold Yes

Table 15 Supported I/O Commands

Feature ID M/O Command Supported

00h M Flush Yes

01h M Write Yes

02h M Read Yes

04h O Write Uncorrectable Yes

05h O Compare No

08h O Write Zones Yes

09h O

Dataset Management - Trim Yes

Dataset Management - IDW No

Dataset Management - IDR No

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 16

Interface requirements

www.seagate.com

3.3 Log Page Support

The Seagate Nytro SSD supports the following mandatory log pages defined in NVMe 1.2a specification.

0Dh O Reservation Register No

0Eh O Reservation Report No

11h O Reservation Acquire No

12h O Reservation Release No

Table 16 Supported Admin Commands

Op-code M/O Command Supported

00h M Delete I/O SQ Yes

01h M Create I/O SQ Yes

02h M Get log Page Yes

04h M Delete I/O CQ Yes

05h M Create I/O CQ Yes

06h M Identify Yes

08h M Abort Yes

09h M Set Features Yes

0Ah M Get Features Yes

0Ch M Async Event Request Yes

0Dh O Namespace Management No

10h M Firmware Commit Yes

11h M Firmware Image Download Yes

15h O Namespace Attachment No

80h O Format NVM Yes

81h O Security Send Yes

82h O Security Receive Yes

C0h VS Diagnostic Send Yes

C1h VS Diagnostic Receive Yes

Table 17 Log Page Support

Log Page M/O Description Supported

01h M Error Information Yes

02h M SMART/Health Information Yes

03h M Firmware Slot Information Yes

05h O Commands Supported and Effects Log Yes

C4h VS Extended SMART Attributes Yes

C5h VS List of Supported Log Pages Yes

C8h VS Recent history Log Page Yes

CBh VS PCIe Error Counter Log Yes

Table 15 Supported I/O Commands (continued)

Feature ID M/O Command Supported

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 17

Interface requirements

www.seagate.com

3.4 SMART Attributes

The following table lists the supported SMART attributes.

Table 18 SMART Attributes (Log Identifier 02h)

Byte # of Bytes Attribute Description

Critical Warning:

These bits, if set, flag various warning sources.

Bit 0: Available Spare is below Threshold

Bit 1: Temperature has exceeded Threshold

Bit 2: Reliability is degraded due to excessive

media or internal errors

Bit 3: Media is placed in Read- Only Mode

Bit 4: Volatile Memory Backup System has failed

(e.g., enhanced power loss capacitor test failure)

Bits 5-7: Reserved

Any of the critical warning can be tied to

asynchronous event notification. Drive

Health Indicator defined under bytes 3095-

3076 of Identify Controller may still indicate

"healthy" status when the critical warning flag

is set.

Temperature:

Overall Device current temperature in Kelvin

For AIC, this reports the NAND temperature, for

2.5-inch FF, this reports the case

temperature,

Available Spare: Contains a normalized percentage

(0 to 100%) of the remaining spare capacity available Starts from 100 and decrements.

4 1 Available Spare Threshold Threshold is set to 10%.

Percentage Used Estimate

(Value allowed to exceed 100%)

A value of 100 indicates that the estimated

endurance of the device has been

consumed, but may not indicate a device fail-

ure. The value is allowed to exceed 100. Per-

centages greater than 254 shall be

represented as 255. This value shall be

updated once per power-on hour (when the

controller is not in a sleep state).

32 16 Data Units Read (in LBAs)

Contains the number of 512 byte data units

the host has read from the controller; this value

does not include metadata. This value is

reported in thousands (i.e., a value of 1 corre-

sponds to 1000 units of 512 bytes read) and is

rounded up. When the LBA size is a value other

than 512 bytes, the

controller shall convert the amount of data

read to 512-byte units.

48 16 Data Units Write (in LBAs)

Contains the number of 512 byte data units

the host has written to the controller; this value

does not include metadata. This value is

reported in thousands (i.e., a value of 1 corre-

sponds to 1000 units of 512 bytes

written) and is rounded up. When the LBA size

is a value other than 512 bytes, the controller

shall convert the amount of data written to

512-byte units. For the NVM* command set,

logical blocks written as part of Write opera-

tions shall be included in this value. Write

Uncorrectable commands shall not impact this

value.

64 16 Host Read Commands Contains the number of read commands

issued to the controller.

80 16 Host Write Commands Contains the number of write commands

issued to the controller.

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 18

Interface requirements

www.seagate.com

96 16 Controller Busy Time (in minutes)

Contains the amount of time the controller is

busy with I/O commands. The controller is

busy when there is a command outstanding to

an I/O Queue (specifically, a command was

issued by way of an I/O Submission Queue Tail

doorbell write and the

corresponding completion queue entry has

not been posted yet to the associated I/O Com-

pletion Queue). This value is reported in min-

utes.

112 16 Power Cycles Contains the number of power cycles.

128 16 Power On Hours

Contains the number of power-on hours. This

does not include time that the controller was

powered and in a low power state

condition.

144 16 Unsafe Shutdowns

Contains the number of unsafe shutdowns.

This count is incremented when a shutdown

notification (CC.SHN) is not received prior to

loss of power.

160 16 Media Errors

Contains the number of occurrences where the

controller detected an unrecovered data integ-

rity error. Errors such as uncorrectable ECC,

CRC checksum failure, or LBA tag mismatch are

included in this field.

176 16 Number of Error Information Log Entries Contains the number of Error Information log

entries over the life of the controller.

Table 18 SMART Attributes (Log Identifier 02h) (continued)

Byte # of Bytes Attribute Description

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 19

Standards and Reference Documents

www.seagate.com

4.0 Standards and Reference Documents

Each Hard Drive and Solid State Drive ("drives") has a product label that includes certifications that are applicable to that

specific drive. The following information provides an overview of requirements that may be applicable to the drive.

4.1 Regulatory Model Numbers

The following model numbers represent the indicated form factors and features of all configurations within the series:

Regulatory Models as Documented in the Declaration of Conformity (DoC):

STA003 - (represents M.2 22110)

4.2 Standards

The drives are recognized in accordance with UL 60950-1 as tested by UL, CSA 60950-1 as tested by CSA, and EN60950-

1 as tested by TUV.

4.3 Agency and Safety Certifications

4.3.1 Safety Certification

These products are certified to meet the requirements of UL/cUL 60950-1, EN 60950-1, and may also include, IEC 62368,

UL 62368 and EN 62368.

4.3.2 Electromagnetic Compatibility

The drive, as delivered, is designed for system integration and installation into a suitable enclosure prior to use. The

drive is supplied as a subassembly and is not subject to Subpart B of Part 15 of the FCC Rules and Regulations nor the

Radio Interference Regulations of the Canadian Department of Communications.

The design characteristics of the drive serve to minimize radiation when installed in an enclosure that provides

reasonable shielding. The drive is capable of meeting the Class B limits of the FCC Rules and Regulations of the

Canadian Department of Communications when properly packaged; however, it is the user’s responsibility to assure

that the drive meets the appropriate EMI requirements in their system. Shielded I/O cables may be required if the

enclosure does not provide adequate shielding. If the I/O cables are external to the enclosure, shielded cables should be

used, with the shields grounded to the enclosure and to the host controller.

4.3.3 Electromagnetic susceptibility

The drive as delivered is tested to meet susceptibility requirements in a representative enclosure. It is the responsibility

of those integrating the drive within their systems to perform those tests required and design their system to ensure

that equipment operating in the same system as the drive or external to the system does not adversely affect the

performance of the drive. See Section 1.4, "Power Consumption."

4.3.4 Electromagnetic compliance

Seagate uses an independent laboratory to confirm compliance with the directives/standards for CE Marking and C-Tick

Marking. The drive was tested in a representative system for typical applications. The selected system represents the

most popular characteristics for test platforms. The system configurations include:

 Typical current use microprocessor

 Keyboard

 Monitor/display

 Printer

 Mouse

Although the test system with this Seagate model complies with the directives/standards, we cannot guarantee that all

systems will comply. The computer manufacturer or system integrator shall confirm EMC compliance and provide the

appropriate marking for their product.

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 20

Standards and Reference Documents

www.seagate.com

4.3.5 European Union (EU) CE Marking Requirements

Drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic

Compatibility Directive (2014/30/EU) put into force on 20 April 2016. Testing is performed to the levels specified by the

product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55032:2012, Class B

and the immunity levels are defined by EN 55024:2010.

The drives also meet the requirements of The Low Voltage Directive (LVD) 2014/35/EU.

Seagate drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with all

relevant regulatory requirements and standards for the drives, Seagate cannot guarantee that all system-level products

into which the drives are installed comply with all regulatory requirements and standards applicable to the system-level

products. The drive is designed for operation inside a properly designed system (e.g., enclosure designed for the drive),

with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and

system integrators should confirm EMC compliance and provide CE marking for the system-level products.

For compliance with the RoHS "Recast" Directive 2011/65/EU (RoHS 2), see Section 4.4.1 on page 21.

4.3.6 Australian RCM Compliance Mark

If this model has the RCM Marking it complies with the Australia/New Zealand Standard AS/NZ CISPR22 and meets the

Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communications and Media Authority

(ACMA).

4.3.7 Canada ICES-003

If this model has the ICES-003:2016 marking it complies with requirements of ICES tested per ANSI C63.4-2014.

4.3.8 South Korean Certification Mark

The South Korean KC Certification Mark means the drives comply with paragraph 1 of Article 11 of the Electromagnetic

Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the

Radio Research Agency (RRA) Communications Commission, Republic of Korea.These drives have been tested and

comply with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B products. Drives are

tested in a representative, end-user system by a Korean-recognized lab.

4.3.9 Morocco Commodity Mark

Seagate drives are tested for compliance and comply with the European Union (EU) Electromagnetic Compatibility

(EMC) Directive 2014/30/EU and the Low Voltage Directive (LVD) 2014/35/EU. Accordingly, the drives also meet the

requirements of Morocco's Order of the Minister of Industry, Trade, Investment and Digital Economy No. 2574-14 of 29

Ramadan 1436 (16 July 2015) on electromagnetic compatibility of equipment.

For drives with the Morocco Mark, Seagate has added the Moroccan Commodity Mark to the drives provided to the

OEM for the sale of Customer Kits produced by our OEM customers that are intended to be incorporated into the OEM's

finished system-level product by an end user. The Customer Kits are considered 'devices' under Morocco's Order of the

Minister of Industry, Trade, Investment and Digital Economy No. 2574-14 of 29 Ramadan 1436 (16 July 2015) on

electromagnetic compatibility of equipment.

4.3.10 Taiwanese BSMI

Drives with the Taiwanese certification mark comply with Chinese National Standard, CNS13438.

For compliance with the Taiwan Bureau of Standards, Metrology and Inspection’s (BSMI) requirements, see Section 4.4.3

on page 22.

ࣗطیࡈ࢕߇ΰח

% 

ɼࢽࡈ؏ܞݦ࢕ࢢ

ࢇЕɼࢽࡈ%  ࢷ࢕ળࢶଢԻ۰࣯Ի

ɼࢽ߾۰یࡈଜЕʨࡶּࢶࡳԻଜֲ ֻҘ

ࠇ߾۰یࡈଟܹ࢑ݡТЬ

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 21

Standards and Reference Documents

www.seagate.com

4.3.11 FCC verification

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an

external device). As such, each drive is considered to be a subassembly even when it is individually marketed to the

customer. As a subassembly, no Federal Communications Commission verification or certification of the device is

required.

Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disk drive,

motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J,

Part 15 of the FCC rules. Operation with noncertified assemblies is likely to result in interference to radio and television

reception.

Radio and television interference. This equipment generates and uses radio frequency energy and if not installed and

used in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception.

This equipment is designed to provide reasonable protection against such interference in a residential installation.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

interference to radio or television, which can be determined by turning the equipment on and off, users are encouraged

to try one or more of the following corrective measures:

Reorient the receiving antenna.

Move the device to one side or the other of the radio or TV.

Move the device farther away from the radio or TV.

Plug the computer into a different outlet so that the receiver and computer are on different branch outlets.

If necessary, users should consult a dealer or an experienced radio/television technician for additional suggestions.

Users may find helpful the following booklet prepared by the Federal Communications Commission: How to Identify and

Resolve Radio-Television Interference Problems. This booklet is available from the Superintendent of Documents,

U.S. Government Printing Office, Washington, DC 20402. Refer to publication number 004-000-00345-4.

4.4 Environmental protection

Seagate designs its products to meet environmental protection requirements worldwide, including regulations

restricting certain chemical substances.

4.4.1 European Union Restriction of Hazardous Substance Law

4.4.1.1 Restriction of Hazardous Substances in Electrical and Electronic Equipment

Seagate drives are designed to be compliant with the European Union RoHS "Recast" Directive 2011/65/EU (RoHS 2) as

amended by Directive (EU) 2015/863. The RoHS2 restricts the use of certain hazardous substances such as Lead,

Cadmium, Mercury, Hexavalent Chromium, Polybrominated Biphenyls (PBB) and Polybrominated Diphenyl Ether

(PBDE), BisBis(2-Ethylhexyl) phthalate (DEHP), Benzyl butyl phthalate (BBP), Dibutyl phthalate (DBP), and Diisobutyl

phthalate (DIBP) in electrical and electronic equipment (EEE).

4.4.1.2 Substances of Very High Concern (SVHC)

The European Union REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) Regulation (EC)

1907/2006 regulates chemicals shipped into and used in Europe. A number of parts and materials in Seagate products

are procured from external suppliers. We rely on the representations of our suppliers regarding the presence of REACH

substances in these articles and materials. Our supplier contracts require compliance with our chemical substance

restrictions, and our suppliers document their compliance with our requirements by providing full-disclosure material

content declarations that disclose inclusion of any REACH-regulated substance in such articles or materials. Product-

specific REACH declarations are available upon request through your Seagate Sales Representative.

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 22

Standards and Reference Documents

www.seagate.com

4.4.2 China Requirements —China RoHS 2

China RoHS 2 refers to the Ministry of Industry and Information Technology Order No. 32, effective July 1,

2016, titled Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and

Electronic Products. To comply with China RoHS 2, Seagate determined this product's Environmental

Protection Use Period (EPUP) to be 20 years in accordance with the Marking for the Restricted Use of

Hazardous Substances in Electronic and Electrical Products, SJT 11364-2014.

䜘Ԧ〠

Part Name

ᴹᇣ⢙䍘

Hazardous Substances

䫵

(Pb)

⊎

(Hg)

䭹

(Cd)

ޝԧ䬜

(Cr+6)

ཊⓤ㚄㤟

(PBB)

ཊⓤҼ㤟䟊

(PBDE)

ঠࡧ⭥䐟ᶯ㓴㻵

PCBA

ᵜ㺘Ṭ׍ᦞSJ/T 11364 Ⲵ㿴ᇊ㕆ࡦǄ

This table is prepared in accordance with the provisions of SJ/T 11364-2014

O˖㺘⽪䈕ᴹᇣ⢙䍘൘䈕䜘Ԧᡰᴹ൷䍘ᶀᯉѝⲴ䟿൷൘GB/T 26572 㿴ᇊⲴ䲀䟿㾱≲ԕлǄ

O˖Indicates that the hazardous substance contained in all of the homogeneous materials for this

part is below the limit requirement of GB/T26572.

X˖㺘⽪䈕ᴹᇣ⢙䍘㠣ቁ൘䈕䜘ԦⲴḀа൷䍘ᶀᯉѝⲴ䟿䎵ࠪGB/T 26572 㿴ᇊⲴ䲀䟿㾱≲Ǆ

X˖Indicates that the hazardous substance contained in at least one of the homogeneous materials

used for this part is above the limit requirement of GB/T26572.

4.4.3 Taiwan Requirements — Taiwan RoHS

Taiwan RoHS refers to the Taiwan Bureau of Standards, Metrology and Inspection’s (BSMI) requirements in standard CNS

15663, Guidance to reduction of the restricted chemical substances in electrical and electronic equipment. Seagate

products must comply with the “Marking of presence” requirements in Section 5 of CNS 15663, effective January 1,

2018. This product is Taiwan RoHS compliant.

The following table meets the Section 5 “Marking of presence” requirements.

Table 19 China - Hazardous Substances

XOO O O O

Table 20 Taiwan - Restricted Substances

䁝ۉち˖⺜ⴔ䁝ۉ /SSDˈර㲏˖۵䚙⭘Ҿޗ䜘֯⭘

Equipment Name: Hard Disk Device/SSD, Type Designation: Internal Use Only

௞ݳ

Unit

䲀⭘⢙䌚৺ަᆨㅖ㲏

Restricted Substance and its chemical symbol

䫵

(Pb)

⊎

(Hg)

䭹

(Cd)

ޝԧ䬜

(Cr+6)

ཊⓤ㚄㤟

(PBB)

ཊⓤҼ㤟䟊

(PBDE)

ঠࡧ⭥䐟ᶯ㓴㻵

PCBA —OOOOO

ۉ㘳  "O" ײᤷ䂢亩䲀⭘⢙䌚ѻⲮ࠶∄䟿ᵚ䎵ࠪⲮ࠶∄䟿สⓆ٬Ǆ

Note 1 "O" indicates that the percentage content of the restricted substance

does not exceed the percentage of reference value of presence.

ۉ㘳  "—" ײᤷ䂢亩䲀⭘⢙䌚⛪ᧂ䲔丵ⴞǄ

Note 2 "—" indicates that the restricted substance corresponds to the exemption.

Seagate Nytro 5000 M.2 SSD Product Manual, Rev. D 23

Standards and Reference Documents

www.seagate.com

4.5 Reference Documents

In case of conflict between this document and any referenced document, this document takes precedence.

Title Location

PCIe specifications:

PCIe - PCI Express Electromechanical specification,

revision 3.0

NVMe - Non Volatile Memory Express specification 1.2a

PCIe CEM - PCI Express Card Electromechanical

specification, revision 1.1

PCI Express M.2 Specification, revision 1.1

www.pcisig.com

www.nvmexpress.org

Trusted Computing Group (TCG) Documents

TCG Storage Architecture Core Specification, Rev. 1.0

Storage Work Group Security Subsystem Class:

Opal, Version 2.00"

www.trustedcomputinggroup.org

Solid State Drive Requirements and Endurance Test Methods

JESD218

JESD219

www.jedec.org

Table 21 Reference Documents

Seagate Technology LLC

AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000

ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888

EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Boulogne-Billancourt, France, 33 1-4186 10 00

Publication Number: 100810195, Rev. D

October 2017

Table of Contents

Seagate Nytro 5000 User Manual

Related Manuals