Table of Contents
Seagate Nytro XF1440 User Manual
Displayed below is the user manual for Nytro XF1440 by Seagate which is a product in the Internal Solid State Drives category. This manual has pages.
Related Manuals
100765362, Rev. F
June 2016
Seagate® Nytro® XF1440
PCIe® Gen 3 x4 - NVMe SSD
© 2016 Seagate Technology LLC. All rights reserved.
Publication number: 100765362, Rev. F, June 2016
Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Nytro and SeaTools are either trade-
marks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a certification mark of NIST,
which does not imply product endorsement by NIST, the U.S., or Canadian governments. All other trademarks or registered trademarks are the property of their respective owners.
No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC.
Call 877-PUB-TEK1 (877-782-8351) to request permission.
When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer’s operating system may use a different
standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage.
Actual quantities will vary based on various factors, including file size, file format, features and application software. Actual data rates may vary depending on operating environment
and other factors. The export or re-export of hardware or software containing encryption may be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for
more information, visit www.bis.doc.gov), and controlled for import and use outside of the U.S. Seagate reserves the right to change, without notice, product offerings or specifications.
Document Revision History
Revision Date Pages affected and description of change
Rev. A 10/06/2015 Initial release.
Rev. B 10/06/2015 Section 4.4 SMART Attributes, revised text.
Rev. C 10/11/2015
Section 2.3 Power Consumption, added Note #3:
Section 3.2.1 8639 Connector and Pin Descriptions, and Section Figure 2. 8639 Connector, corrected to reflect 8639
connector.
Rev. D 11/06/2015
Throughout document: Added “Nytro” to product name.
Section 2.2 Performance Revised performance specs.
Section 2.1 Models and Capacity Change capacity from 1800GB to 1920GB & model # to ST1920HM0001
Rev. E 03/04/2016
Section 1.0 Scope Added 512 to sector size bullet & Added ”OoBM (SMBus) Mgmt support” to Interface.
Section 2.1 Models and Capacity Title = “Formatted Capacity” & Added 512 Formatted capacities.
Section 2.2 Performance Updated Performance Table 2 specs & footnote [1] edited to add - "results are based on
Iometer and the 4K block sector drive."
Section 2.2 Performance Table 3 DC noise ripple updates & Table 4 - Added Note 3
Added Section 2.5 Out of Band Management (SMBus) and Section
Revised Section 2.5 Out of Band Management (SMBus), adding Table 5 OBM (SMBus) Protocol; updating Table 6
Section 2.5.1 Vital Product Data (VDP) Add Note [1] to Table 6
Section 2.6 Environmental Conditions Table 7 - temperature gradient = 30C & Added Humidity to Temperature
table, and Table 10 Airflow Units corrected to = LFM
Section 3.0 Mechanical Information New Mechanical Drawing & SFF reference note updated to SFF8200
Section 3.2.1 8639 Connector and Pin Descriptions PCIe 8639 Pin Descriptions updated.
Rev. F June 2016
Section 1.0 Scope, Added Warranty.
Section 2.3 Power Consumption. Changed specifications. Revised notes.
Added Section 2.5.2 SMBus Electrical Parameters.
Reformatted the following template elements to comply with product family documentation:
• Notes
• Tables
• Bullets
Seagate Nytro XF1440 SSD Product Manual, Rev. F 2
Contents
1.0 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.0 Product Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Models and Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
2.2 Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
2.3 Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.4 Power Loss Data Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.5 Out of Band Management (SMBus). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.5.1 Vital Product Data (VDP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.5.2 SMBus Electrical Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.6 Environmental Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.7 Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.8 Endurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.0 Mechanical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.1 Mechanical Dimensions & Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
3.2 Bottom Cover Stiffness/Deflection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
3.2.1 8639 Connector and Pin Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
4.0 Interface requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.1 PCIe features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
4.2 Interface Commands Supported: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
4.3 Log Page Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
4.4 SMART Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
5.0 Standards and Reference Documents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5.1 Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
5.1.1 Electromagnetic compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
5.1.2 Electromagnetic compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
5.1.3 European Union Restriction of Hazardous Substances (RoHS). . . . . . . . . . . . . . . . . . . . . . . .18
5.1.4 China Restriction of Hazardous Substances (RoHS) Directive. . . . . . . . . . . . . . . . . . . . . . . . .18
5.2 Reference Documents and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Seagate Nytro XF1440 SSD Product Manual, Rev. F 3
1.0 Scope
Seagate Nytro XF1440 SSD is a PCIe Gen 3 SSD architected with the NVMe (Non-Volatile Memory express) interface that
delivers leading performance, low latency, and world class reliability and endurance.
·Interface:
PCIe Gen 3 x4 - 2.5" NVMe SSD
Out of Band Management (SMBus)
management support
·Capacities:
400GB, 480GB, 800GB,
960GB, 1.6TB, 1.92TB
·Components:
eMLC NAND Flash Memory
·Form Factor:
Industry standard SFF 2.5 inch,
7mm dimensions
·Power
Lower power than current Enterprise class
products (<12.5W)
Power Loss Data Protection (PLDP)
Hot Plug capable
·Shock
Op/Non Op: 1500G @ 0.5ms
·Vibration
Op/Non Op: 3.08 Grms (7-800hz)
Op/Non Op: 16.3 Grms (20-2000hz)
·Certifications
CE, BSMI, KCC, C-Tick,
FCC, IC, UL, TUV, CB
·Reliability:
Mean Time Between Failure (MTBF):
2 Million hours
Data Retention: 3 months @ 40C
Sector Sizes: 4096 and 512 bytes
·Endurance
Certain models support up to
3 Drive Writes/day
Certain models support up to
0.3 Drive Writes/day
· Temperature
Operating: 0 to 70C
(as measured by SMART)
Non Operating: -40 to 85C
·Airflow
Varies by capacity. See Section 2.6 for
details.
·Performance
Varies by capacity and endurance. See
Section 2.2 for details.
·Security
Self encryptions available
·Product Compliance
RoHS
·Warranty
5 years limited
Seagate Nytro XF1440 SSD Product Manual, Rev. F 4
2.0 Product Specifications
2.1 Models and Capacity
2.2 Performance
NOTE Here is more information on Performance:
Random Read and Sequential Write: 400GB and 480GB capacities are
limited to 32x 128Gb die active.
IOMeter: Performance results are based on IOMeter. IOMeter is
available at http://sourceforge.net/projects/iometer/. IOMeter is
licensed under the Intel Open Source License and the GNU General
Public License.
Response times: Typical response times are measured under nominal
conditions of temperature and voltage as measured on a
representative sample of drives.
Measurements: Measurements are performed on the drive after the
workload reaches steady state, including all background activities
required for normal operations.
Table 1 Models
Standard Models SED Models
4096 sector 512 sector 512 sector
ST1920HM0001 ST1920KN0001 ST1920KN0011
ST1600HM0011 ST1600KN0001 ST1600KN0011
ST960HM0001 ST960KN0001 ST960KN0011
ST800HM0021 ST800KN0001 ST800KN0011
ST480HM0001 ST480KN0001 ST480KN0011
ST400HM0021 ST400KN0001 ST400KN0011
Table 2 Formatted Capacity
XF1440 Series 4K Formatted Capacity 512 Formatted Capacity
400GB 97,778,846 781,422,768
480GB 117,212,886 937,703,088
800GB 195,353,046 1,562,824,268
960GB 234,423,126 1,876,385,008
1600GB 390,703,446 3,125,627,568
1920GB 468,843,606 3,750,748,848
Table 3 Performance
Specification 1.6TB 800GB 400GB 1.92TB 960GB 480GB
Sequential Read (MB/s) 128k, QD=32 2500 2500 2400 2500 2500 2400
Sequential Write (MB/s) 128k, QD=32 900 900 500 900 900 500
Random Read (kIOPS) 4k, QD=64 240 240 220 240 240 220
Random Write (kIOPS) 4k, QD=64 40 33 25 15 12 10
70/30 Mixed Workload
Random Read/Write (kIOPS) 4k, QD=64
100 80 55 45 35 25
Seagate Nytro XF1440 SSD Product Manual, Rev. F 5
2.3 Power Consumption
The 2.5" drive receives DC power (+12V) through the standard PCIe 8639 interface.
NOTE Here is more information on Power:
NVMe Autonomous Power States are not supported.
Typical power measurements are based on an average of drives tested
under nominal conditions.
Maximum power is defined as RMS over 100ms.
2.4 Power Loss Data Protection
If power is interrupted, at any time while data is being programmed into the NAND, it is possible that data loss may
occur. This can cause drive errors to be reported to the host. To prevent these errors from occurring, XF1440 implements
an energy storage solution called Power Loss Data Protection. This is a circuit that maintains power to the NAND while it
is being programmed, even if power to the system is interrupted. By supporting Power Loss Data Protection, the drive
assures data integrity in the drive is preserved, preventing the loss of data and the reporting of drive errors to the host.
2.5 Out of Band Management (SMBus)
XF1440 provides out of band management through SMBUS interface, accessing the NVMe Basic Management
Command page through address 0x6A, complies with the PCI-SIG SMBus Interface for SSD Socket 2 and Socket 3 ECN.
Table 4 DC Requirements
Supply Voltage XF1440 Series
Voltage Tolerances - nominal (%) 12V ± 10%
DC Ripple/Noise 450mVp-p: 100Hz to 100kHz
250mVp-p: 100kHz to 20MHz
150mVp-p: 20MHz to 80MHz
Rise Time (Max*/Min)
*10% ~ 90% Nominal Voltage
100ms* /0s (hot-pluggable)
Fall Time (Min) 100μs @ 1A max discharge
Minimum Off Time 150ms
Inrush Current (Typical Peak) 2A for <2ms
Table 5 Power
Specification XF1440 Series
Max Operating Power (W) 12.5
Power State 1 (W) 8.25
Power State 2 (W) 6.0
Power State 3 (W) 4.0
Seagate Nytro XF1440 SSD Product Manual, Rev. F 6
Table 6 Out of Band Management (SMBus) Protocol
Command
Code
Offset
(byte) Description
0
00 Length of Status: Indicates number of additional bytes to read before encountering PEC. This value should always
be 6 (06h) in implementations of this version of the spec.
01
Status Flags (SFLGS): This field indicates the status of the NVM subsystem.
SMBus Arbitration – Bit 7 is set ‘1’ after a SMBus block read is completed all the way to the stop bit without bus
contention and cleared to ‘0’ if a SMBus Send Byte FFh is received on this SMBus slave address.
Drive Not Ready – Bit 6 is set to ‘1’ when the subsystem cannot process NVMe management commands, and the rest of
the transmission may be invalid. If cleared to ‘0’, then the NVM subsystem is fully powered and ready to respond to man-
agement commands. This logic level intentionally identifies and prioritizes powered up and ready drives over their pow-
ered off neighbors on the same SMBus segment.
Drive Functional – Bit 5 is set to ‘1’ to indicate an NVM subsystem is functional. If cleared to ‘0’, then there is an
unrecoverable failure in the NVM subsystem and the rest of the transmission may be invalid.
Reset Not Required - Bit 4 is set to ‘1’ to indicate the NVM subsystem does not need a reset to resume normal
operation. If cleared to ‘0’ then the NVM subsystem has experienced an error that prevents continued normal
operation. A controller reset is required to resume normal operation.
Port 0 PCIe Link Active - Bit 3 is set to ‘1’ to indicate the first port’s PCIe link is up (i.e., the Data Link Control and
Management State Machine is in the DL_Active state). If cleared to ‘0’, then the PCIe link is down.
Port 1 PCIe Link Active - Bit 2 is set to ‘1’ to indicate the second port’s PCIe link is up. If cleared to ‘0’, then the second
port’s PCIe link is down or not present.
Bits 1-0 shall be set to ‘1’.
02
SMART Warnings: This field shall contain the Critical Warning field (byte 0) of the NVMe SMART / Health Information
log. Each bit in this field shall be inverted from the NVMe definition (i.e., the management interface shall indicate a
‘0’ value while the corresponding bit is ‘1’ in the log page). See the NVMe specification for bit definitions.
If there are multiple controllers in the NVM subsystem, the management endpoint shall combine the Critical Warning
field from every controller such that a bit in this field is:
Cleared to ‘0’ if any controller in the subsystem indicates a critical warning for that corresponding bit.
Set to ‘1’ if all controllers in the NVM subsystem do not indicate a critical warning for the corresponding bit.
03
Composite Temperature (CTemp): This field indicates the current temperature in degrees Celsius. If a temperature
value is reported, it should be the same temperature as the Composite Temperature from the SMART log of hottest con-
troller in the NVM subsystem. The reported temperature range is vendor specific, and shall not exceed the
range -60 to +127°C. The 8 bit format of the data is shown below.
This field should not report a temperature when that is older than 5 seconds. If recent data is not available, the
NVMe management endpoint should indicate a value of 80h for this field.
Value Description
00h-7Eh Temperature is measured in degrees Celsius (0 to 126C)
7Fh 127C or higher
80h No temperature data or temperature data is more the 5 seconds old.
81h Temperature sensor failure
82h-C3h Reserved
C4 Temperature is -60C or lower
C5-FFh Temperature measured in degrees Celsius is represented in twos complement (-1 to -59C)
04
Percentage Drive Life Used (PDLU): Contains a vendor specific estimate of the percentage of NVM subsystem NVM life
used based on the actual usage and the manufacturer’s prediction of NVM life. If an NVM subsystem has multiple con-
trollers the highest value is returned. A value of 100 indicates that the estimated endurance of the NVM in the NVM sub-
system has been consumed, but may not indicate an NVM subsystem failure. The value is allowed to exceed 100.
Percentages greater than 254 shall be represented as 255. This value should be updated once per power-on hour and
equal the Percentage Used value in the NVMe SMART Health Log Page.
06 : 05 Reserved: Shall be set to 0000h.
07 PEC: An 8 bit CRC calculated over the slave address, command code, second slave address and returned data.
Algorithm is in SMBus Specifications.
Seagate Nytro XF1440 SSD Product Manual, Rev. F 7
2.5.1 Vital Product Data (VDP)
XF1440 accesses a Vital Product Data (VPD) EEPROM page as listed below through address 0xA6.
This requires 3.3V Auxiliary voltage.
NOTE
Initial and Maximum Power requirements are not supported.
8
08 Length of identification: Indicates number of additional bytes to read before encountering PEC.
This value should always be 22 (16h) in implementations of this version of the spec.
10 : 09 Vendor ID: The 2 byte vendor ID, assigned by the PCI SIG. Should match VID in the Identify Controller command
response. MSB is transmitted first.
30 : 11 Serial Number: 20 characters that match the serial number in the NVMe Identify Controller command response.
First character is transmitted first.
31 PEC: An 8 bit CRC calculated over the slave address, command code, second slave address and returned data.
Algorithm is in SMBus Specifications.
32+ 255 : 32
Vendor Specific: This data structure shall not exceed the maximum read length of 255 specified in the SMBus
version 3 specification. Preferably length is not greater than 32 for compatibility with SMBus 2.0, additional blocks
shall be on 8 byte boundaries.
Table 7 VDP Structure
Address Function Type Size
(B)
Default
Size Description
0 Class Code RO 3 Vendor Device type and programming interface
3
ID RO
2Vendor PCI-SIG Vendor ID
5 20 Vendor Serial Number (vendor unique)
25 40 Vendor Model Number (ASCII string)
65 PCIe Port 0 Capabilities RO 2 Vendor Maximum Link Speed
66 Maximum Link Width
67 PCIe Port 1 Capabilities RO 2 Vendor Maximum Link Speed
68 Maximum Link Width
69
Initial Power Requirements RO 3
Vendor 12V power rail initial power requirement (W)
70 0 Reserved
71 0 Reserved
72
Maximum Power Requirements RO 3
Vendor 12V power rail initial power requirement (W)
73 0 Reserved
74 0 Reserved
75 Capability List Pointer RO 2 Vendor 16-bit address pointer to start of capability
list (zero means no capability list)
Table 6 Out of Band Management (SMBus) Protocol (continued)
Command
Code
Offset
(byte) Description
Seagate Nytro XF1440 SSD Product Manual, Rev. F 8
2.5.2 SMBus Electrical Parameters
The SMBus interface operates only when 3.3V_AUX is supplied to the drive. When 3.3V_AUX and 12V are supplied to the
drive, the SMBus interface functions fully. When only 3.3V_AUX is supplied to the drive (12V off), VPD data remains
accessible over the SMBus interface, but other functions are unavailable. No specific sequencing is needed for the 12V
and 3.3V_AUX input voltages.
2.6 Environmental Conditions
NOTE
Specification does not cover connection issues that might result from testing at this
level.
Operating shock: The drive, as installed for normal operation, operates
error free while subjected to intermittent shock not exceeding the
specification. Shock may be applied in the X, Y, or Z-axis. Shock is not to
be repeated more than once every 2 seconds.
Non-Operating shock: The limits of non-operating shock apply to all
conditions of handling and transportation. This includes isolated drive
and integrated drives. Shock may be applied in the X, Y, or Z-axis.
NOTE Here is more information on Vibration:
Operating vibration: The drive, as installed for normal operation, shall
operate error free while subjected to specified vibration not exceeding
specification. Vibration may be applied in the X, Y, or Z-axis.
Non-Operating vibration: The limits of non-operating vibration shall
apply to all conditions of handling and transportation. This includes
Table 8 SMBus Electrical Parameters
Specification XF1440 Series
3.3V Auxiliary Voltage Supply 2.8V - 3.8V
3.3V Auxiliary Maximum Continuous Current
SMBus Idle
SMBus Active
20μA
1mA
3.3V Auxiliary Maximum Capacitive Load 5μF
Table 9 Temperature and Humidity
Specification XF1440 Series
Temperature (°C) Operating (as measured by SMART)
Non-Operating
0 to 70
-40 to 85
Temperature
Gradient Maximum
Operating
Non-Operating 30°C/hr
30°C/hr
Humidity Operating
Non-Operating
5%-95%
5%-95%
Table 10 Shock
Specification XF1440 Series
Shock - Maximum Operating / Non Operating 1500 G at 0.5 ms
Table 11 Vibration
Specification XF1440 Series
Vibration - Profile Operating /Non Operating 3.08 Grms (7-800 Hz), 16.3 Grms (20-2000 Hz)
Seagate Nytro XF1440 SSD Product Manual, Rev. F 9
both isolated drive and integrated drives. Vibration may be applied in
the X, Y, or Z-axis.
NOTE It is recommended that airflow for 2.5-inch form factor should be towards the
server, from the non-connector side to the connector side. Airflow is specified
across the surface of the drive. Spacing all sides is assumed to be 3mm.
2.7 Reliability
NOTE The MTBF specification is based on these assumptions for Enterprise Storage
System environments: 8760 power on hours per year, 250 power on/off cycles
per year, and nominal voltages.
The drive achieves specified MTBF when operating in an environment that
ensures the case temperatures do not exceed the temperature specifications.
Data Retention is the time that NAND retains data at maximum rated endurance
2.8 Endurance
NOTE Endurance rating is the expected amount of host data that can be written by
product when subjected to a specified workload at a specified operating and
storage temperature over the specified product life. For the specific workload to
achieve this level of endurance, please refer to JEDEC Specification JESD218.
Terabyte Writes is defined as 1x1012 Bytes.
Table 12 Airflow Requirements for SFF
Airflow Definition Unit Ambient
Temperature
400GB/
480GB
800GB/
960GB
1600GB/
1920GB
Airflow Along Drive LFM 35C 110 412 412
Table 13 Reliability
Specification XF1440 Series
Mean Time Between Failures (MTBF) 2 million hours
Data Retention 3 months @ 40°C
Table 14 Endurance
2.5” Model Type 400GB 480GB 800GB 960GB 1600GB 1920GB
Endurance - Drive Writes
per Day
High Endurance 33 3
High Capacity 0.3 0.3 0.3
Seagate Nytro XF1440 SSD Product Manual, Rev. F 10
3.0 Mechanical Information
3.1 Mechanical Dimensions & Weight
Figure 1. Configuration dimensions (2.5” models)
NOTE These dimensions conform to the Small Form Factor Standard documented in
SFF-8200 and SFF-8639. The latest revisions may be found at
www.sffcommittee.org.
3.2 Bottom Cover Stiffness/Deflection
Weight: 2.5” models 0.198 pounds 90 grams
Table 15 Bottom Cover Stiffness/Deflection
Operating: No uncorrectable errors 10mm probe: 1.02kgf or 5mm probe: 0.92kgf
Non-Operating: No uncorrectable errors 20mm probe: 2.0kgf on any point on bottom cover
Seagate Nytro XF1440 SSD Product Manual, Rev. F 12
Table 16 PCIe 8639 Pin Descriptions
Seagate Nytro XF1440 SSD Product Manual, Rev. F 13
4.0 Interface requirements
4.1 PCIe features
The Seagate Nytro SSD supports NVMe spec 1.2a. Below is a table showing the supported Features, Op-code, and
whether vendor specific, mandatory, or optional.
4.2 Interface Commands Supported:
The Seagate Nytro SSD supports all the mandatory NVMe Admin and I/O command-sets in NVMe spec 1.2a. In addition,
several optional commands are also supported. Below are tables showing the Commands, Op-code, whether Admin or
IO and mandatory or optional:
Table 17 PCIe Features
Feature ID M/O Description Supported
01h M Arbitration Yes
02h M Power Management Yes
03h O LBA Range Type No
04h M Temperature Threshold Yes
05h M (Time limited) Error Recovery Yes
06h O Volatile Write Cache No
07h M Number of Queues Yes
08h M Interrupt Coalescing Yes
09h M Interrupt Vector Configuration Yes
0Ah O Write Atomicity No
0Bh M Asynchronous Event Configuration Yes
0Ch O Autonomous Power State Transition No
0Dh O Host Memory Buffer No
80h O Software Progress Marker No
81h O Host Identifier No
82h O Reservation Notification Mask No
83h O Reservation Persistence No
C0h VS System Time Yes
C1h VS Test Unit Ready Yes
C2h VS Media Life Left Threshold Yes
Table 18 Supported I/O Commands
Feature ID M/O Command Supported
00h M Flush Yes
01h M Write Yes
02h M Read Yes
04h O Write Uncorrectable Yes
05h O Compare No
08h O Write Zones Yes
09h O
Dataset Management - Trim Yes
Dataset Management - IDW No
Dataset Management - IDR No
Seagate Nytro XF1440 SSD Product Manual, Rev. F 14
4.3 Log Page Support
The Seagate Nytro SSD supports the following mandatory log pages defined in NVMe 1.2a specification.
0Dh O Reservation Register No
0Eh O Reservation Report No
11h O Reservation Acquire No
12h O Reservation Release No
Table 19 Supported Admin Commands
Op-code M/O Command Supported
00h M Delete I/O SQ Yes
01h M Create I/O SQ Yes
02h M Get log Page Yes
04h M Delete I/O CQ Yes
05h M Create I/O CQ Yes
06h M Identify Yes
08h M Abort Yes
09h M Set Features Yes
0Ah M Get Features Yes
0Ch M Async Event Request Yes
0Dh O Namespace Management No
10h M Firmware Commit Yes
11h M Firmware Image Download Yes
15h O Namespace Attachment No
80h O Format NVM Yes
81h O Security Send Yes
82h O Security Receive Yes
C0h VS Diagnostic Send Yes
C1h VS Diagnostic Receive Yes
Table 20 Log Page Support
Log Page M/O Description Supported
01h M Error Information Yes
02h M SMART / Health Information Yes
03h M Firmware Slot Information Yes
05h O Commands Supported and Effects Log Yes
C0h VS Extended SMART Attributes Yes
C1h VS Debug Log 1 Yes
C2h VS Debug Log 2 Yes
C3h VS Reserved No
C4h VS Reserved No
Table 18 Supported I/O Commands (continued)
Feature ID M/O Command Supported
Seagate Nytro XF1440 SSD Product Manual, Rev. F 15
4.4 SMART Attributes
The following table lists the supported SMART attributes.
C5h VS List of Supported Log Pages Yes
C6h VS Power Monitor Log Page Yes
C7h VS Reserved No
C8h VS Recent history Log Page Yes
C9h VS Security Error log Yes
CAh VS Lifetime Drive History Log Page Yes
Table 21 SMART Attributes (Log Identifier 02h)
Byte # of Bytes Attribute Description
01
Critical Warning:
These bits, if set, flag various warning sources.
Bit 0: Available Spare is below Threshold
Bit 1: Temperature has exceeded Threshold
Bit 2: Reliability is degraded due to excessive
media or internal errors
Bit 3: Media is placed in Read- Only Mode
Bit 4: Volatile Memory Backup System has failed
(e.g., enhanced power loss capacitor test failure)
Bits 5-7: Reserved
Any of the critical warning can be tied to
asynchronous event notification. Drive
Health Indicator defined under bytes 3095-
3076 of Identify Controller may still indicate
"healthy" status when the critical warning flag
is set.
12
Temperature:
Overall Device current temperature in Kelvin
For AIC, this reports the NAND temperature, for
2.5-inch FF, this reports the case
temperature,
31
Available Spare: Contains a normalized percentage
(0 to 100%) of the remaining spare capacity available Starts from 100 and decrements.
4 1 Available Spare Threshold Threshold is set to 10%.
51
Percentage Used Estimate
(Value allowed to exceed 100%)
A value of 100 indicates that the estimated
endurance of the device has been
consumed, but may not indicate a device fail-
ure. The value is allowed to exceed 100. Per-
centages greater than 254 shall be
represented as 255. This value shall be
updated once per power-on hour (when the
controller is not in a sleep state).
32 16 Data Units Read (in LBAs)
Contains the number of 512 byte data units
the host has read from the controller; this value
does not include metadata. This value is
reported in thousands (i.e., a value of 1 corre-
sponds to 1000 units of 512 bytes read) and is
rounded up. When the LBA size is a value other
than 512 bytes, the
controller shall convert the amount of data
read to 512-byte units.
Table 20 Log Page Support (continued)
Log Page M/O Description Supported
Seagate Nytro XF1440 SSD Product Manual, Rev. F 16
48 16 Data Units Write (in LBAs)
Contains the number of 512 byte data units
the host has written to the controller; this value
does not include metadata. This value is
reported in thousands (i.e., a value of 1 corre-
sponds to 1000 units of 512 bytes
written) and is rounded up. When the LBA size
is a value other than 512 bytes, the controller
shall convert the amount of data written to
512-byte units. For the NVM* command set,
logical blocks written as part of Write opera-
tions shall be included in this value. Write
Uncorrectable commands shall not impact this
value.
64 16 Host Read Commands Contains the number of read commands
issued to the controller.
80 16 Host Write Commands Contains the number of write commands
issued to the controller.
96 16 Controller Busy Time (in minutes)
Contains the amount of time the controller is
busy with I/O commands. The controller is
busy when there is a command outstanding to
an I/O Queue (specifically, a command was
issued by way of an I/O Submission Queue Tail
doorbell write and the
corresponding completion queue entry has
not been posted yet to the associated I/O Com-
pletion Queue). This value is reported in min-
utes.
112 16 Power Cycles Contains the number of power cycles.
128 16 Power On Hours
Contains the number of power-on hours. This
does not include time that the controller was
powered and in a low power state
condition.
144 16 Unsafe Shutdowns
Contains the number of unsafe shutdowns.
This count is incremented when a shutdown
notification (CC.SHN) is not received prior to
loss of power.
160 16 Media Errors
Contains the number of occurrences where the
controller detected an unrecovered data integ-
rity error. Errors such as uncorrectable ECC,
CRC checksum failure, or LBA tag mismatch are
included in this field.
176 16 Number of Error Information Log Entries Contains the number of Error Information log
entries over the life of the controller.
Table 21 SMART Attributes (Log Identifier 02h) (continued)
Byte # of Bytes Attribute Description
Seagate Nytro XF1440 SSD Product Manual, Rev. F 17
5.0 Standards and Reference Documents
5.1 Standards
The Seagate Nytro XF1440 SSD family complies with Seagate standards as noted in the appropriate sections of this
manual.
The drives are recognized in accordance with UL 60950-1 as tested by UL, CSA 60950-1 as tested by CSA, and EN60950-
1 as tested by TUV.
The security features of Self-Encrypting Drive models are based on the “TCG Storage Architecture Core Specification”
and the “Storage Work Group Security Subsystem Class: Opal, Version 2.00".
5.1.1 Electromagnetic compatibility
The drive, as delivered, is designed for system integration and installation into a suitable enclosure prior to use. The
drive is supplied as a subassembly and is not subject to Subpart B of Part 15 of the FCC Rules and Regulations nor the
Radio Interference Regulations of the Canadian Department of Communications.
The design characteristics of the drive serve to minimize radiation when installed in an enclosure that provides
reasonable shielding. The drive is capable of meeting the Class A limits of the FCC Rules and Regulations of the
Canadian Department of Communications when properly packaged; however, it is the user’s responsibility to assure
that the drive meets the appropriate EMI requirements in their system. Shielded I/O cables may be required if the
enclosure does not provide adequate shielding. If the I/O cables are external to the enclosure, shielded cables should be
used, with the shields grounded to the enclosure and to the host controller.
5.1.1.1 Electromagnetic susceptibility
As a component assembly, the drive is not required to meet any susceptibility performance requirements. It is the
responsibility of those integrating the drive within their systems to perform those tests required and design their
system to ensure that equipment operating in the same system as the drive or external to the system does not
adversely affect the performance of the drive.
5.1.2 Electromagnetic compliance
Seagate uses an independent laboratory to confirm compliance with the directives/standards for CE Marking and C-Tick
Marking. The drive was tested in a representative system for typical applications and comply with the Electromagnetic
Interference/Electromagnetic Susceptibility (EMI/EMS) for Class A products. The selected system represents the most
popular characteristics for test platforms. The system configurations include:
Typical current use microprocessor
Keyboard
Monitor/display
Printer
Mouse
Although the test system with this Seagate model complies with the directives/standards, we cannot guarantee that all
systems will comply. The computer manufacturer or system integrator shall confirm EMC compliance and provide the
appropriate marking for their product.
Electromagnetic compliance for the European Union
If this model has the CE Marking it complies with the European Union requirements of the Electromagnetic
Compatibility Directive 2004/108/EC as put into place on 20 July 2007.
Canada ICES-003
If this model has the ICES-003 Marking it complies with the Canadian Standard Association Standard CAN/CSA-CISPR
22-10, Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement.
Seagate Nytro XF1440 SSD Product Manual, Rev. F 18
Australian RCM Mark
If this model has the RCM Marking it complies with the Australia/New Zealand Standard AS/NZ CISPR22 and meets the
Electromagnetic Compatibility (EMC) Framework requirements of Australia’s Radiocommunications Act.
Korean KCC
If these drives have the Korean Communications Commission (KCC) logo, they comply with KN22, KN 24, and KN61000.
Taiwanese BSMI
If this model has two Chinese words meaning “EMC certification” followed by an eight digit identification number, as a
Marking, it complies with Chinese National Standard (CNS) 13438 and meets the Electromagnetic Compatibility (EMC)
Framework requirements of the Taiwanese Bureau of Standards, Metrology, and Inspection (BSMI).
5.1.3 European Union Restriction of Hazardous Substances (RoHS)
The European Union Restriction of Hazardous Substances (RoHS) Directive restricts the presence of chemical
substances, including Lead (Pb), in electronic products effective July 2006.
A number of parts and materials in Seagate products are procured from external suppliers. We rely on the
representations of our suppliers regarding the presence of RoHS substances in these parts and materials. Our supplier
contracts require compliance with our chemical substance restrictions, and our suppliers document their compliance
with our requirements by providing material content declarations for all parts and materials for the disk drives
documented in this publication. Current supplier declarations include disclosure of the inclusion of any RoHS-regulated
substance in such parts or materials.
Seagate also has internal systems in place to ensure ongoing compliance with the RoHS Directive and all laws and
regulations which restrict chemical content in electronic products. These systems include standard operating
procedures that ensure that restricted substances are not utilized in our manufacturing operations, laboratory
analytical validation testing, and an internal auditing process to ensure that all standard operating procedures are
complied with.
5.1.4 China Restriction of Hazardous Substances (RoHS) Directive
This product has an Environmental Protection Use Period (EPUP) of 20 years. The following table contains
information mandated by China's "Marking Requirements for Control of Pollution Caused by Electronic
Information Products" Standard.
"O" indicates the hazardous and toxic substance content of the part (at the homogeneous material level) is lower than
the threshold defined by the China RoHS MCV Standard.
"X" indicates the hazardous and toxic substance content of the part (at the homogeneous material level) is over the
threshold defined by the China RoHS MCV Standard.
Seagate Nytro XF1440 SSD Product Manual, Rev. F 19
5.2 Reference Documents and Support
In case of conflict between this document and any referenced document, this document takes precedence.
Table 22 Reference Documents
Title Location
PCIe specifications:
PCIe - PCI Express Electromechanical specification,
revision 3.0
NVMe - Non Volatile Memory Express specification 1.2a
PCIe CEM - PCI Express Card Electromechanical
specification, revision 1.1
www.pcisig.com
Trusted Computing Group (TCG) Documents
TCG Storage Architecture Core Specification, Rev. 1.0
Storage Work Group Security Subsystem Class:
Opal, Version 2.00"
www.trustedcomputinggroup.org
Solid State Drive Requirements and Endurance Test Methods
JESD218
JESD219
www.jedec.org
Seagate NytroCLI User Guide http://www.seagate.com/support/by-product/ssd-and-pcie-
flash/
Table 23 Support Services
Seagate Support Services Location
For information regarding online support and services, visit:
Available services include:
Presales & Technical support
Global Support Services phone numbers & business hours
Authorized Service Centers
Warranty terms vary based on type of warranty chosen:
"Managed Life" or "Limited Warranty with Media Usage.”
Consult the Seagate sales representative for warranty terms and
conditions.
http://www.seagate.com/contacts/
For information regarding data recovery services, visit: http://www.seagate.com/services-software/seagate-recovery-
services/recover/
For Nytro® Support, visit: http://www.seagate.com/support/by-product/ssd-and-pcie-flash/
For information regarding Warranty Support, visit:For
information regarding data recovery services, visit:
http://www.seagate.com/support/warranty-and-replacements/
For Seagate OEM, Distribution partner portal, and reseller portal,
visit:
http://www.seagate.com/partners/
Seagate Technology LLC
AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000
ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888
EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Boulogne-Billancourt, France, 33 1-4186 10 00
Publication Number: 100765362, Rev. F
June 2016