Skylane Optics SPP85P30100DC16 User Manual
Displayed below is the user manual for SPP85P30100DC16 by Skylane Optics which is a product in the Network Transceiver Modules category. This manual has pages.
Related Manuals
Datasheet
SPP85P3010xD_RevC
1
For your product safety, please read the following information carefully before any manipulation of the transceiver:
ESD
This transceiver is specified as ESD threshold 1kV for SFI pins and 2kV for all others electrical input pins, tested per MIL-STD-883G, Method 3015.4
/JESD22-A114-A (HBM). However, normal ESD precautions are still required during the handling of this module.
LASER SAFETY
This is a Class1 Laser Product according to IEC 60825-1:2007. This product complies with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated (June 24, 2007).
The optical ports of the module need to be terminated with an optical connector or with a dust plug in order to avoid contamination.
1. Overview
SPP85P3010xD is a high performance transceiver module for up to 10 Gigabit Ethernet data links over a multimode fibre
pair. The maximum reach1 is 300m (50/125µm), with 5dB end of life (EOL) power budget. The transmitter is an 850nm
VCSEL, the receiver is a PIN photodiode.
This transceiver module is compliant with the Small Form-factor Pluggable (SFP+) Multisource Agreement (MSA) and hot
pluggable. Always contact Skylane Optics® commercial agents for compatibility with different equipment platforms.
2. Features
• SFP+ Multi-Source Agreement compliant (SFF-8431)
• Hot pluggable SFP+ footprint
• Serial ID functionality supported according to (SFF-8472)
• Class 1 laser safety standard IEC 60825 compliant
• Dual LC connector
• 850nm VCSEL transmitter
• 300m point-to-point transmission on 50/125µm fibre
• Operating temperature range 0°C to 70°C
• Low power dissipation (<1W)
• Digital Diagnostics Monitoring (DDM)
3. Applications
• 10 Gigabit Ethernet
• 8 Fiber Channel
• 4 Fiber Channel
• 2 Fiber Channel
4. Optical Interface
P/N
Wavelength
[nm]
Optical Output
Power2 [dBm]
Receiver
Sensitivity3 [dBm]
Dispersion
Penalty [dB]
Receiver
Overload4 [dBm]
Power Budget2
[dB]
SPP85P30100D
850
-6 to -1
≤ -11
3.9
-1
≥ 5
1. Distance is estimated assuming typical optical losses after decent quality fibre deployment; Only optical budget value is guaranteed.
2. EOL, over operating temperature range
3. Measured with 10.3125Gbps PRBS 231-1, BER≤10-12
4. The optical input to the receiver should not exceed this value. Transmitters must never be directly connected to receivers (optical loop back) before ensuring that
proper optical attenuation is used
5. Technical Parameters
SPP85P3010xD – SFP+ Dual Fibre
850nm / 300m / 10 Gigabit Ethernet
Figure 1. SFP+ Dual Fibre
(non-binding illustration)
Datasheet
SPP85P3010xD_RevC
Specification subject to change without notice
2
5.1. Recommended Operating Conditions
Parameter
Min
Typ
Max
Unit
Notes
Storage temperature
-40
85
°C
Operating Case Temperature
0
70
°C
Relative Humidity
5
95
%
Non condensing
Power Supply Voltage
3.15
3.3
3.45
V
Power Supply Current
300
mA
5.2. Transmitter Optical Specifications
Parameter
Min
Typ
Max
Unit
Notes
Average Output Power
-6
-1
dBm
5
Centre Wavelength
840
850
860
nm
Spectral Width (RMS)
0.45
nm
Extinction Ratio
3
5
dB
Dispersion Penalty
3.9
dB
5. Output power coupled into a 50/125µm µm multimode fibre
5.3. Receiver Optical Specifications
Parameter
Min
Typ
Max
Unit
Notes
Receiver Sensitivity
-11
dBm
6
Receiver Overload
-1
dBm
6
Receiver Operating Range
840
850
860
nm
6. Measured with 10.3125Gbps PRBS 231-1, BER≤10-12
6. Transceiver Electrical Pad Layout
VeeT
20
1
VeeT
TD-
19
2
Tx_Fault
TD+
18
3
Tx_Disable
VeeT
17
4
SDA
VccT
16
Towards BEZEL ←
5
SCL
VccR
15
→ Towards ASIC
6
MOD_ABS
VeeR
14
7
RS0
RD+
13
8
Rx_LOS
RD-
12
9
RS1
VeeR
11
10
VeeR
Figure 2. Transceiver Electrical Pad Layout
Datasheet
SPP85P3010xD_RevC
Specification subject to change without notice
3
7. Module Electrical Pin Definition
SFP+ MSA (SFF-8431)
Pin
Number
Name
Function
1
VeeT
Module Transmitter Ground
2
Tx_Fault
Module Transmitter Fault
3
Tx_ Disable
Transmitter Disable
4
SDA
2-Wire Serial Interface Data
5
SCL
2-Wire Serial Interface Clock
6
Mod_ABS
Module Absent
7
RS0
Not Used
8
Rx_LOS
Receiver Loss of Signal
9
RS1
Not Used
10
VeeR
Module Receiver Ground
11
VeeR
Module Receiver Ground
12
RD-
Receiver Inverted Data Output
13
RD+
Receiver Non-Inverted Data Output
14
VeeR
Module Receiver Ground
15
VccR
Module Receiver 3.3V Supply
16
VccT
Module Transmitter 3.3V Supply
17
VeeT
Module Transmitter Ground
18
TD+
Transmitter Non-Inverted Data Input
19
TD-
Transmitter Inverted Data Input
20
VeeT
Module Transmitter Ground
8. EEPROM
SFP+ MSA (SFF-8472)
2 wire address 1010000x
2 wire address 1010001x
0
0
Serial ID Defined by
SFP MSA (96 bytes)
Alarm and Warning
Thresholds (56 bytes)
55
Cal Constants
(40 bytes)
95
95
Vendor Specifics
(32 bytes)
Real Time Diagnostic
Interface (24 bytes)
119
127
127
Vendor Specifics (8 bytes)
Reserved
(128 bytes)
User writable Eeprom
(120 bytes)
255
247
255
Vendor Specifics (8 bytes)
A0h
A2h
Figure 3. EEPROM of a SFP+
Datasheet
SPP85P3010xD_RevC
Specification subject to change without notice
4
9. Ordering Information
Part Number
Description
SPP85P30100D
SFP+ Dual Fibre, Tx 850nm (VCSEL), Rx (PIN), maximum distance 300m, power budget 5dB,
10x Gigabit Ethernet, LC connector, 0°C to 70°C, DDM
SPP85P3010GD
SFP+ Dual Fibre, Tx 850nm (VCSEL), Rx (PIN), maximum distance 300m, power budget 5dB,
10x Gigabit Ethernet, LC connector, 0°C to 70°C, DDM, Specific Firmware
SPP85P3010AD
SFP+ Dual Fibre, Tx 850nm (VCSEL), Rx (PIN), maximum distance 300m, power budget 5dB,
10x Gigabit Ethernet, LC connector, 0°C to 70°C, DDM, Specific Firmware
10. Document Revision Information
Revision
Description
A
Initial release
B
Specification updated to include 8x Fiber Channel compatibility
C
Ordering information table updated with the “G” and “A” versions
Skylane Optics® supplies a broad range of optical
transceivers. Our engineers work closely with our
customers to find the best solutions for every
application. We are committed to provide high
quality products and services to our customers.
For questions on this product please contact:
support@skylaneoptics.com
Beyond
Quality
Performing
Smartly
Reliable
Alliance