StarTech.com RK619WALLO User Manual
Displayed below is the user manual for RK619WALLO by StarTech.com which is a product in the Rack Cabinets category. This manual has pages.
Related Manuals
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: November 28, 2019 12:05 PM
Product Diagram (RK619WALLO)
Component Function
1Square Mounting Holes • Used to mount equipment in the Wall-Mount Rack.
2Mounting Holes
• Used to secure the Wall-Mount Rack to a
Mounting Surface.
• Wall-Mount Rack’s maximum weight capacity =
175 lbs (80 kg).
Requirements
For the latest requirements, please visit www.startech.com/RK619WALLO
• (Optional) Cage Nut Tool x 1
• (Optional) Spirit/Bubble Level x 1
• Phillips Head Screwdriver x 1
• Mounting Hardware (sold separately)
Mounting the Wall-Mount Rack
Fasten the Wall-Mount Rack to a Mounting Surface using the appropriate Mounting
Hardware. Verify that the Wall-Mount Rack is level with a Spirit/Bubble Level before
fastening it to a Mounting Surface.
Warning! The Wall-Mount Rack is designed to be installed on a wood stud, solid
concrete, or cinder block wall. The wall structure should be capable of supporting at least
four times the weight of the mounted equipment. Contact a construction professional
to install the Wall-Mount Rack. Failure to do so may result in personal injury and/or
equipment damage.
6U 18in Depth Wall-Mount Server Rack
Installing a Shelf or Equipment
1. Insert the M6 Cage Nuts into the Square Mounting Holes on the Mounting Rails.
Insert one side of the M6 Cage Nut (included) into the Square Mounting Hole and
push the other side into the Square Mounting Hole, until it locks into place.
Note: Use a Cage Nut Tool (sold separately) if you are having issues installing the M6
Cages Nuts into the Rack.
2. Align the Mounting Holes on the Equipment with the M6 Cages Nuts installed in
step 2.
3. Insert an M6 Screw through a M6 Plastic Washer (included) and through the
Mounting Holes on the Equipment and into the M6 Cage Nut.
4. Using a Phillips Head Screwdriver tighten the M6 Screws, being careful not to
over-tighten.
Product Dimensions
Front
1
2
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a lifetime warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
Warning Statements
• Do not exceed the weight capacity of this product. Overloading this product might result in injury or property damage. This
product can support the following weight: Stationary = 175 lbs (80 kg).
Varningar
• Överskrid inte produktens vikt kapacitet. Överbelastning av denna produkt kan leda till skador eller skador på egendom.
Denna produkt kan stödja följande vikt: stationär: 80 kg.
Avertissements
• Ne dépassez pas la capacité pondérale de ce produit. Une surcharge de ce produit peut entraîner des dommages corporels ou
matériels. Ce produit peut supporter le poids suivant, stationnaire = 80 kg.
Warnhinweise
• Überschreiten Sie nicht die Tragfähigkeit dieses Produkts. Das Überladen dieses Produkts kann zu Verletzungen oder
Sachschäden führen. Dieses Produkt kann das folgende Gewicht tragen: Stationär = 80 kg.
Dichiarazioni di avvertenza
• Non superare la capacità di carico massimo di questo prodotto onde evitare danni o lesioni alla proprietà. Questo prodotto e’
in grado di supportare il peso riportato, Statico = 80 kg.
Mensagens de aviso
• Não exceda a capacidade de peso deste produto. Sobrecarregar este produto pode resultar em ferimentos ou danos à
propriedade. Este produto pode suportar o seguinte peso: estacionário: 80 kg.
Advertencias de uso
• No exceda la capacidad de carga de este producto. El sobrecargarlo puede ocasionar lesiones y daños en propiedad. Este
producto puede soportar el siguiente peso, Estacionario = 80 kg.
Waarschuwingen
• Overschrijd de maximale capaciteit van dit product niet. Overbelasting De maximale gewichtscapaciteit mag niet
overschreden worden. Overbelasting kan kan letsel of schade tot gevolg hebben. Dit product kan het volgende gewicht
ondersteunen, stationair = 80 kg.
注意
• 本製品で定められた最大積載重量を超えないようにして下さい。最大積載重量をオーバーした場合、怪我をする恐れや器物破損の恐れがあります。本製品は、モニ
ター1台あたり80 kgまで支持できます。
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.
Top View
Side