StarTech.com USB2HDCAP User Manual
Displayed below is the user manual for USB2HDCAP by StarTech.com which is a product in the Video Capturing Devices category. This manual has pages.
Related Manuals
Manual Revision: 09/23/2015
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
USB2HDCAP
High-Denition USB 2.0 Video Capture
Device with H.264 Encoder - 1080p
*actual product may vary from photos
Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
i
Table of Contents
Introduction ............................................................................................ 1
Packaging Contents ................................................................................................................................. 1
System Requirements ..............................................................................................................................1
Hardware Installation ............................................................................3
Software Installation .............................................................................3
Software Conguration ......................................................................... 4
Specications .......................................................................................... 6
Technical Support ..................................................................................7
Warranty Information ............................................................................ 7
Instruction Manual
1
Introduction
The USB2HDCAP USB 2.0 HD Capture Device allows you to record High-Denition
1080p video from an HDMI or Component source to your computer through an
available USB 2.0 port.
With Support for 1080p video and stereo audio (HDMI / Component) input and output,
this external HD capture card is the perfect solution for recording video game play, or
home videos for editing and compiling. On board hardware H264 encoding manages
the video conversion process independently of your computer, to save valuable system
resources. The added versatility of 3 dierent video inputs (HDMI / Component /
S-Video) gives you the freedom to connect a multitude of audio-video devices to your
computer, quickly and easily.
This USB capture device supports NTSC and PAL systems, and comes complete with
an easy to use video capture software suite, allowing you to record video or take still
screenshots and save them to your PC. The device also oers video pass through, so
you can watch the same source on an external display.
NOTE: This Product will not record digitally encrypted content.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
Packaging Contents
• 1x USB Capture Device
• 1x USB Cable
• 1x Component Cable
• 1x RCA Audio Cable
• 1x Driver / Software CD
• 1x Instruction Manual
System Requirements
• USB 2.0 enabled computer system with available USB port
• Microsoft® Windows® 2000/XP/Vista(32/64bit)/7(32/64bit)/ 8(32/64bit)
• HDMI®/Component/S-Video/ video source and cabling (DVD, DVR, VCR, Etc.)
Instruction Manual
2
NOTE: This Device can capture at 1080p at 30/50/60 frames per second. Live Video
output will always display at 30 frames per second.
This Product will not record digitally encrypted content.
Instruction Manual
3
Hardware Installation
1. Connect the type B connector on the included USB cable to the USB2HDCAP device
2. Connect the type A connector on the included USB cable to an available USB 2.0
port on your computer system.
NOTE: After you connect the physical hardware to the computer it is likely that you
may receive prompts for installation. Please close these specic prompts as these
steps will be performed during software installation.
3. Connect your video source (DVD, DVR, VCR, Etc.) to the HDMI, Composite or S-Video
input on the USB2HDCAP depending on the video source.
Note: If intending to capture a composite video signal, connect the composite cable
to the Component Y (Green) input.
Software Installation
After Hardware Installation the “Found New Hardware Wizard” will open, click “Cancel”
to close the window.
1. Download the latest drivers from the StarTech.com website (recommended), or
insert the included Driver and Software Disk into your DVD-ROM drive.
2. Locate the Setup(.exe) application. This le will be located in Windows directory
in the downloaded folder, or if using the included Driver and Software DVD the
installation will begin automatically.
3. The Driver installation program will begin. If a Windows Security dialog window
appears, click the “Run” or “Install this driver software anyway” option to proceed.
4. Select Quick Installation from the Menu that appears. The Installation will begin.
5. Select Typical Installation and click Install.
6. You will receive a request to start HiVison HD Capture Click the Start Button
7. You will be asked to select the language for installation, select your desired
Language and click OK
8. Follow the Prompts to complete the VivaStation Capture Installation, when
prompted click Finish.
NOTE: You will be required to restart your computer.
Instruction Manual
4
Software Conguration
1. Once the Installation an ICON on your computer’s Desktop will be created called
“VivaStation”, click this ICON to launch the software.
2. Upon Launch the Software will prompt you to select the device and the source
import. Select “VivaStation” as the Device. For the Source Input Select the type of
device you are capturing (HDMI®, Component etc.)
3. You will now see your video source displayed in the VivaStation Software Window.
Record
To Record Video to your computer click the Red
record button on the Option Bar
Click this button again to stop recordin
SnapShot
To take a save an image the video source on your
computer click the SnapShot button on the
Option Bar
Ratio
To toggle between available Aspect Rations select
the Ration Button on the Option Bar
Volume Control
You can adjust volume using the Volume Buttons on
the Option Bar
Playback
The Playback Option allows you to access les that
have already been saved.
Instruction Manual
5
Schedule Recordings
Select the Schedule Records button allows you to
schedule specic times that the device should start
and stop recording.
Video Source
Select Video source to change the Input Select the
type of device you are capturing (HDMI,
Component etc.)
Additional Settings
Settings provides a more complex visual interface to
adjust the same changes made through the Option
bar as well as some additional advanced settings
including frames per second, and the path where
les are saved.
Instruction Manual
6
Specications
Converter Type Format Converter
AV Input
S-Video
Composite
Component
HDMI®
AV Output USB
Interface USB
Audio Yes
Industry Standards NTSC, PAL-M, PAL-60, PAL Video Encoding:
MPEG4/H.264
Connectors
1x HDMI® (19 pin) Female
1x Component Video (3 x RCA) Female
1x S-Video (4 pin; Mini-DIN) Female
1x Stereo Audio (2 x RCA) Female
1x USB Micro-B (5 pin)
Max Resolution 1080p
Maximum Digital Resolutions 1080p
Supported Resolutions 1080i/p, 720p, 576i/p, 480i/p
Audio Specications HDMI® or Component RCA Stereo
Instruction Manual
7
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.