Techly IDATA HDMI-KVM2 User Manual
Displayed below is the user manual for IDATA HDMI-KVM2 by Techly which is a product in the KVM Extenders category. This manual has pages.
Related Manuals
U s e r M a n u a l
HDMI KVM EXTENDER over Network Cable
Specifications
HDMI 1.3
Audio support
Items
Power supply
black
HDMI resolution
supported
Video bandwidth
640*480@60Hz 800*600@60Hz 1024*768@60Hz
1280*720@60Hz 1360*768@60Hz 1440*900@60Hz
1400*1050@60Hz 1680*1050@60Hz 1920*1080@60Hz
5V/1A*2pcs
109.6(L)x89.5(w)x26.3(H)mm*2pcs
PCM (44.1KHz, 48KHz)
HDCP version
HDCP1.2
≤70Mbps
HDM version
Type A ,19 pin, Female
LAN connector
Operation temperaure 0℃〜50℃
Relative humidity 10-95% (Noncondensing)
TX:160g RX:170g
RJ-45
Q：Abnormal color display or flashing after all the devices are well
connected?
A：1): Pls press reset button of HDMI extender.
2): Make sure the network cable is made according to the
standard of IEEE-568B.
Q：USB does not work？
A：Re-install the driving software，check and make sure the USB cables
are connected well, then reset Transmitter or Receiver.
HDMI connector
Power Consumption
Dimensions
Color
Weight
Disclaimer
5.Switch Connection
PC
NOTE：Transmission distance depends on type of network cable,
CAT5:80m，CAT5E：100m， CAT6:120m.
FAQ
Q：Yellow light of Lan port is flashing but slowly?
A : 1) : Check whether HDMI Extender Transmitter and HDMI Extender
Receiver is reversed.
2): Check whether HDMI source device output HDMI signal correctly.
3): Change the HDMI cable of Transmitter.
Q: Yellow light of Lan port is flashing quickly but no display?
A: 1): If HDMI source is graphics card, please set the resolution to be
supported by display .
2) : Check whether HDMI cable of Receiver is well connected.
3): Change the HDMI cable of Receiver.
Q: Yellow Led light of Lan port is not light?
A: 1): Check connection of network cable.
2): Network cable is too long.
The product name and brand name may be registered trademark of
related manufacturers.TM and ® may be omitted on the user manual.
The pictures on the user manual are just for reference,and there may
be some slight difference with the real products.
We reserve the rights to make changes without further notice to a
product or system described herein to improve reliability, function
or design.
HDMI
USB cable
Transmitter TX
Switch Switch*N
TV
Receiver RX
NOTE：Point to multi-point connection via switch is supported too,but under point to
multi-point configuration, it is strongly recommended to operate KVM function on
one receiver only at the same time.
Specification
keyboard/mouse
TX<3.5w RX<3.5w
Package Content Panel Introduction
1.HDMI EXTENDER TX (Transmitter)
1Power input（DC5V） 5
USB port：to connect with PC
3
Power indicator
USB connection indicator
2HDMI signal input
6
4
Important Safety Instruction
1. Do not mix up the transmitter and receiver before instruction
2. Do not unplug the device ,when it is in using,keep distance from
inflammable and explosive devices.
3. Power Supply :DC 5V ,Use only the supplied power supply unit ,
Do not use the power supply if it is damaged.
Product Introduction
This is a HDMI KVM EXTENDER, is made up of a transmitter unit
(local site) and a receiver unit(remote site) . The HDMI signal can
be extended up to 120 meters via network cable, and the resolution
supported is up to 1080p@60Hz. It allows access to a computer
system from a remote console by USB connectors(USB keyboard
and mouse). It is perfect for factory and construction sites, or any
type of installation where the console needs to be in a conveniently
accessible location. It is also useful for control and security purposes.
Therefore it is wildly used in command center, data control center,
operation rooms in military, bank, government, enterprise etc .
1237
6
Reset button
LAN signal output
7
2.HDMI EXTENDER RX (Receiver)
HDMI KVM EXTENDER TX x1pcs HDMI KVM EXTENDER RX x1pcs
User manual ×1pcs
Power supply x2pcs
4、General Connection
Transmission distance can be up to 120 meters for 1080p
over one CAT6
PC
3. Supported OS and version
Windows 7, Windows 7 x64, Windows Server 2008, Windows Server
2008 x64, Windows Vista, Windows Vista x64, Windows Server 2003,
Windows XP, Windows XP-x64, Windows 2000, Windows ME,
Windows 98SE
Features
1.Extend HDMI signal up to 120 meters via a single network cable
2.High resolution supported is up to 1080p@60Hz
3.LED indicators, know the status of power and USB connection
easily
4.Support KVM function, remote control conveniently
5.Support LAN standard 802.3 ethernet 10/100/1000Mbps
6.Compliant STP and UTP CAT5/5E/6 network cables
7.Aluminium alloy housing design, stable and durable
Power input（DC5V） 5
USB port：to connect with
keyboard/mouse
Power indicator
USB connection indicator
HDMI signal output
6
Reset button
LAN signal input
7
12347
56
5
Follow the stanard of IEEE-568B:
1- Orange/white
2- Orange
3- Green/white
4- Blue
5- Blue/white
6- Green
7- Brown/white
8- Brown
Installation Procedures
1.How to make a CAT5E/6 network cake
HDMI
USB cable
Transmitter TX
TV
Receiver RX
2.Install driving Software of computer USB port before
using this device
Chinese _CH34XSER_Driver English_CH34XSER_Driver
2.2 No need restart when installation completed
USB
1
3
2
4
CD(USB driver
software) x1pcs
4
keyboard/mouse
1. Source devices：PC or other devices with HDMI graphics card
2. Display devices：With HDMI input port, SDTV, HDTV, and monitor
3. Network cables：
UTP/STP CAT5E/6 network cables, which following the standard of
IEEE-568B.
Transmission length: CAT5 80m/CAT5E 100m/CAT6 120m.
Installation Requirements
“Chinese _CH34XSER_Driver “is for Chinese version
“English _CH34XSER_Driver “ is for English version
2.1