Toshiba 24W1763DA User Manual
Displayed below is the user manual for 24W1763DA by Toshiba which is a product in the TVs category. This manual has pages.
Related Manuals
OPERATING INSTRUCTIONS
COLOUR TELEVISION WITH REMOTE CONTROL
English - 1 -
Contents
Safety Information ...........................................2
Markings on the Product..................................3
Environmental Information...............................5
Features ..........................................................7
Accessories Included.......................................7
Standby Notications ....................................... 7
TV Control Switch & Operation........................7
Inserting the Batteries into the Remote ...........8
Connect Power ...............................................8
Antenna Connection ........................................8
License Notication .........................................8
Remote Control .............................................10
Connections...................................................11
Switching On/Off ............................................12
First Time Installation.....................................12
Using SatcoDX Feature(**)............................13
Media Playback via USB Input ......................13
Media Browser Menu.....................................13
CEC and CEC RC Passthrough ....................14
General TV Operation ...................................19
Using the Channel List ..................................19
Conguring Parental Settings ........................ 19
Electronic Programme Guide (EPG) .............19
Teletext Services ...........................................20
Software Upgrade..........................................20
Troubleshooting & Tips ..................................20
PC Input Typical Display Modes ....................21
AV and HDMI Signal Compatibility ................21
Supported File Formats for USB Mode .........22
Supported DVI Resolutions ...........................23
DVD Mode (Limited Models Only) .................24
General Playback ..........................................25
DVD Troubleshooting ....................................25
Overview of the Remote Control ...................27
General DVD Operation (depending on
model)............................................................28
English - 2 -
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
Note: Follow the on screen instructions for operating the related
features.
In extreme weather (storms, lightning) and long inactivity
periods (going on holiday) disconnect the TV set from the
mains.
The mains plug is used to disconnect TV set from the mains
and therefore it must remain readily operable. If the TV set is
not disconnected electrically from the mains, the device will
still draw power for all situations even if the TV is in standby
mode or switched off.
IMPORTANT - Please read these
instructions fully before installing
or operating
WARNING: This device is intended to be
used by persons (including children) who are
capable / experienced of operating such a
device unsupervised, unless they have been
given supervision or instruction concerning
the use of the device by a person responsible
for their safety.
• Use this TV set at an altitude of less than 2000
meters above the sea level, in dry locations and
in regions with moderate or tropical climates.
• The TV set is intended for household and
similar general use but may also be used in
public places.
• For ventilation purposes, leave at least 5cm of
free space around the TV.
• The ventilation should not be impeded by
covering or blocking the ventilation openings
with items, such as newspapers, table-cloths,
curtains, etc.
• The power cord plug should be easily
accessible. Do not place the TV, furniture, etc.
on the power cord. A damaged power cord/plug
can cause re or give you an electric shock.
Handle the power cord by the plug, do not
unplug the TV by pulling the power cord. Never
touch the power cord/plug with wet hands as
this could cause a short circuit or electric shock.
Never make a knot in the power cord or tie it with
other cords. When damaged it must be
replaced, this should only be done by qualied
personnel.
• Do not expose the TV to dripping or splashing
of liquids and do not place objects lled with
liquids, such as vases, cups, etc. on or over the
TV (e.g., on shelves above the unit).
• Do not expose the TV to direct sunlight
or do not place open ames such as lit
candles on the top of or near the TV.
• Do not place any heat sources such as electric
heaters, radiators, etc. near the TV set.
• Do not place the TV on the oor and inclined
surfaces.
• To avoid danger of suffocation, keep plastic
bags out of the reach of the babies, children
and domestic animals.
• Carefully attach the stand to the TV. If the stand
is provided with screws, tighten the screws
rmly to prevent the TV from tilting. Do not
over-tighten the screws and mount the stand
rubbers properly.
• Do not dispose of the batteries in re or with
hazardous or ammable materials.
Warning: Batteries must not be exposed to
excessive heat such as sunshine, re or the like.
WARNING - excessive sound pressure from
earphones or headphones can cause hearing
loss.
ABOVE ALL - NEVER let anyone, especially
children, push or hit the screen, push
anything into holes, slots or any other
openings in the case.
Caution Serious injury or death risk
Risk of electric shock Dangerous voltage risk
Maintenance
Important maintenance
component
English - 3 -
Markings on the Product
The following symbols are used on the product
as a marker for restrictions and precautions and
safety instructions. Each explanation shall be
considered where the product bears related
marking only. Note such information for security
reasons.
Class II Equipment: This appliance is
designed in such a way that it does not
require a safety connection to electrical
earth.
Class II Equipment With Functional
Earthing: This appliance is designed in
such a way that it does not require a
safety connection to electrical earth, the earth
connection is used for functional purposes.
Protective Earth Connection: The
marked terminal is intended for connection
of the protective earthing conductor
associated with the supply wiring.
Hazardous Live Terminal: The marked
terminal(s) is/are hazardous live under
normal operating conditions.
Caution, See Operating Instructions:
The marked area(s) contain(s) user
replaceable coin or button cell batteries.
Class 1 Laser Product:
This product contains
Class 1 laser source that
is safe under reasonably
foreseeable conditions of
operation.
WARNING
Do not ingest the battery, Chemical Burn
Hazard
This product or the accessories supplied
with the product may contain a coin/button
cell battery. If the coin/button cell battery is
swallowed, it can cause severe internal burns
in just 2 hours and can lead to death.
Keep new and used batteries away from
children.
If the battery compartment does not close
securely, stop using the product and keep it
away from children.
If you think batteries might have been
swallowed or placed inside any part of the
body, seek immediate medical attention.
i
CLASS 1
LASER PRODUCT
WARNING
Never place a television set in unstable or
inclined locations. A television set may fall,
causing serious personal injury or death. Many
injuries, particularly to children, can be avoided
by taking simple precautions such as;
• Using cabinets or stands recommended by
the manufacturer of the television set.
• Only using furniture that can safely support
the television set.
• Ensuring the television set is not overhanging
the edge of the supporting furniture.
• Not placing the television set on tall furniture
(for example, cupboards or bookcases)
without anchoring both the furniture and the
television set to a suitable support.
• Not standing the television set on cloth or
other materials placed between the television
and supporting furniture.
• Educating children about the dangers of
climbing on furniture to reach the television
set or its controls. If your existing television
set is being retained and relocated, the same
considerations as above should be applied.
WALL MOUNTING WARNINGS
• Read the instructions before mounting your
TV on the wall.
• The wall mount kit is optional. You can obtain
from your local dealer, if not supplied with
your TV.
• Do not install the TV on a ceiling or on an
inclined wall.
• Use the specied wall mounting screws and
other accessories.
• Tighten the wall mounting screws rmly to
prevent the TV from fall. Do not over-tighten
the screws.
English - 4 -
WARNING
Apparatus connected to the protective earthing
of the building installation through the MAINS
connection or through other apparatus with
a connection to protective earthing – and to
a television distribution system using coaxial
cable, may in some circumstances create a re
hazard. Connection to a television distribution
system has therefore to be provided through
a device providing electrical isolation below a
certain frequency range (galvanic isolator, see
EN 60728-11)
Using the special functions to change the size
of the displayed image (i.e. changing the height/
width ratio) for the purposes of public display or
commercial gain may infringe on copyright laws.
The LCD display panels are manufactured
using an extremely high level of precision
technology; however, some times some parts
of the screen may be missing picture elements
or have luminous spots. This is not a sign of a
malfunction.
The set should be operated only from a 220-240 V
AC 50 Hz outlet. Ensure that the television is not
standing on the mains lead. Do not cut off the mains
plug from this equipment, this incorporates a special
Radio Interference Filter, the removal of which will
impair its performance. It should only be replaced by
a correctly rated and approved type. IF IN DOUBT
PLEASE CONSULT A COMPETENT ELECTRICIAN.
Specication is subject to change without notice.
English - 5 -
Environmental Information
This television is designed to be environment friendly. To reduce energy consumption, you can
follow these steps:
If you set the Energy Saving to Minimum, Medium, Maximum or Auto the TV will reduce the energy
consumption accordingly. If you like to set the Backlight to a xed value set as Custom and adjust
the Backlight (located under the Energy Saving setting) manually using Left or Right buttons on
the remote. Set as Off to turn this setting off.
Note: Available Energy Saving options may differ depending on the selected Mode in the System>Picture menu.
The Energy Saving settings can be found in the System>Picture menu. Note that some picture
settings will be unavailable to be changed.
If pressed Right button while Auto option is selected or Left button while Custom option is selected,
“Screen will be off in 15 seconds.” message will be displayed on the screen. Select Proceed and
press OK to turn the screen off immediately. If you don’t press any button, the screen will be off in
15 seconds. Press any button on the remote or on the TV to turn the screen on again.
Note: Screen Off option is not available if the Mode is set to Game.
When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also
reduce energy consumption.
Disposal...
The following information is only for EU-member states:
Disposal of products
The crossed out wheeIed dust bin symbol indicates that products must be collected and disposed of separately
from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be
separated at the recycling centres.
The black bar indicates that the product was placed on the market after August 13, 2005.
By participating in separate collection of products and batteries, you will help to assure the proper disposal of
products and batteries and thus help to prevent potential negative consequences for the environment and human
health.
For more detailed information about the collection and recycling programmes available in your country, please
contact your local city ofce or the shop where you purchased the product.
Disposal of batteries and/or accumulators
The crossed out wheeled dust bin symboI indicates that batteries and/or accumulators must be collected and
disposed of separately from household waste.
If the battery or accumulator contains more than the specied values of lead (Pb), mercury (Hg), and/or cadmium
(Cd) dened in the European Battery Directive, then the chemical symbols for lead (Pb), mercury (Hg) and/or
cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.
By participating in separate collection of batteries, you will help to assure the proper disposal of products and
batteries and thus help to prevent potential negative consequences for the environment and human health. For
more detailed information about the coIIection and recycling programmes available in your country, please contact
your local city ofce or the shop where you purchased the product.
English - 6 -
REACH information
The European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization
and Restriction of Chemicals), entered into force on 1 June 2007, with phased deadlines to 2018.
Toshiba will meet all REACH requirements and is committed to provide our customers with
information about the presence in our articles of substances included on the candidate list
according to REACH regulation.
Please consult the following website www.toshiba-tv.com for information about the presence in
our articles of substances included on the candidate list according to REACH in a concentration
above 0.1 % weight by weight.
EU Conformity Statement
This product is carrying the CE-Mark in accordance with the related European Directives.
Responsible for CE-Marking is Vestel UK, Langley, Berkshire, SL3 6EZ.
This product is labeled with the CE Mark in accordance with the related European Directives,
notably RoHS Directive 2011/65/EU. Furthermore the product complies with the Ecodesign
Directive 2005/32/EC (EuP) and 2009/125/EC (ErP) and its related implementing measures.
This equipment corresponds to requirements of the Technical Regulation on limitation of usage of certain
dangerous substances in electrical and electronic equipment.
English - 7 -
Features
• Remote controlled colour TV
• Fully integrated digital terrestrial/cable/satellite
TV (DVB-T-T2/C/S-S2)
• HDMI inputs to connect other devices with
HDMI sockets
• USB input
• OSD menu system
• Scart socket for external devices (such as DVD
Players, PVR, video games, etc.)
• Stereo sound system
• Teletext
• Headphone connection
• Automatic programming system
• Manual tuning
• Automatic power down after up to eight hours.
• Sleep timer
• Child lock
• Automatic sound mute when no transmission.
• NTSC playback
• AVL (Automatic Volume Limiting)
• PLL (Frequency Search)
• PC input
• Game Mode (Optional)
• Picture off function
Accessories Included
• Remote Control
• Batteries: 2 x AAA
• Quick Start Guide
• Product Fiche
• Side AV Connection Cable**
(**) Limited Models Only
Some features may not be available dependant on your
TV model, please check the product fiche for your
product specifications
For more detailed information on installation,
function and control refer to the full manual on our
the website at http://www.toshiba-tv.com
Standby Notications
If the TV does not receive any input signal (e.g.
from an aerial or HDMI source) for 3 minutes, it
will go into standby. When you next switch-on,
the following message will be displayed: “TV
switched to stand-by mode automatically
because there was no signal for a long time.”
Press OK to continue.
If the TV is on and it isn’t being operated
for a while it will go into standby. When you
next switch-on, the following message will be
displayed. “TV switched to stand-by mode
automatically because no operation was made
for a long time.” Press OK to continue.
TV Control Switch & Operation
1. Up direction
2. Down direction
3. Volume / Info / Sources List selection and
Standby-On switch
The Control button allows you to control the
Volume/ Programme/Source and Standby-On
functions of the TV.
To change volume: Increase the volume by
pushing the button up. Decrease the volume by
pushing the button down.
To change channel: Press the middle of the
button in, the information banner will appear on
the screen. Scroll through the stored channels
by pushing the button up or down.
To change source: Press the middle of the
button in twice(for the second time in total),
the source list will appear on the screen. Scroll
through the available sources by pushing the
button up or down.
To turn the TV off: Press the middle of the button
in and hold it down for a few seconds, the TV will
turn into standby mode.
English - 8 -
To turn on the TV: Press the middle of the button
in, the TV will turn on.
Notes:
• If you turn the TV off, this cycle starts again
beginning with the volume setting.
• Main menu OSD cannot be displayed via
control buttons.
Operation with the Remote Control
Press Menu button on your remote control to
display main menu screen. Use the directional
buttons to select a menu tab and press OK to
enter. Use the directional buttons again to select
or set an item. Press Return/Back button or
Menu button to quit a menu screen.
Input Selection
Once you have connected external systems to
your TV, you can switch to different input sources.
Press Source button on your remote control
consecutively to select the different sources.
Changing Channels and Volume
You can change the channel and adjust the
volume by using the Volume +/- and Programme
+/- buttons on the remote.
Inserting the Batteries into the Remote
Remove the back cover to reveal the battery
compartment. Insert two size AAA batteries.
Make sure the (+) and (-) signs match (observe
correct polarity). Do not mix old and new
batteries. Replace only with same or equivalent
type. Place the cover back on.
1.
3.
2.
Connect Power
IMPORTANT: The TV set is designed to
operate on a 220-240V AC, 50 Hz supply. After
unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to
the mains. Plug the power cable to the mains
socket outlet.
Antenna Connection
Connect the aerial or cable TV plug to the
AERIAL INPUT (ANT) socket or satellite plug to
the SATELLITE INPUT (LNB) socket located on
the back of the TV.
satellite(**)
REAR
OF
THE TV
aerial
or
cable
If you want to connect a device to the TV, make sure
that both the TV and the device are turned off before
making any connection. After the connection is done,
you can turn on the units and use them.
(**) Limited Models Only
License Notication
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States
and other countries.
Manufactured under license from Dolby
Laboratories. Dolby Audio and the double-D
symbol are trademarks of Dolby Laboratories.
Dolby Audio™ (supporting Dolby Digital Plus™)
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS
TruSurround is a trademark of DTS, Inc.© DTS,
Inc. All Rights Reserved.
English - 9 -
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS
2.0+Digital Out is a trademark of DTS, Inc.© DTS,
Inc. All Rights Reserved.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, DTS-HD, the Symbol, & DTS or
DTS-HD and the Symbol together are registered
trademarks of DTS, Inc.© DTS, Inc. All Rights
Reserved.
DVB is a registered trademark of the DVB Project.
[1] EIA/CEA-861-D compliance covers the
transmission of uncompressed digital video
with high-bandwidth digital content protection,
which is being standardized for reception of
high-denition video signals. Because this is
an evolving technology, it is possible that some
devices may not operate properly with the
television.
(**)This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
(**) Limited Models Only
English - 10 -
Remote Control
1. Standby: Switches On / Off the TV
2. Numeric buttons: Switches the channel, enters a
number or a letter in the text box on the screen.
3. TV: Displays channel list / Switches to TV Source
4. Mute: Completely turns off the volume of the TV
5. Volume +/-
6. Menu: Displays TV menu
7. Navigation buttons: Helps navigate menus, content
etc. and displays the subpages in TXT mode when
pressed Right or Left
8. OK: Conrms user selections, holds the page (in TXT
mode), views channel list (DTV mode)
9. Back/Return: Returns to previous screen, opens index
page (in TXT mode)
10. Media browser: Opens the media browsing screen
11. Quick Menu: Displays a list of menus for quick access
12. My button 1 (*)
13. Coloured Buttons: Follow the on-screen instructions
for coloured button functions
14. Language: Switches between sound modes (analogue
TV), displays and changes audio/subtitle language
(digital TV, where available)
15. Rapid reverse: Moves frames backwards in media
such as movies
16. No function
17. Pause: Pauses the media being played
18. Play: Starts to play selected media
19. Subtitles: Turns subtitles on and off (where available)
20. Stop: Stops the media being played
21. Rapid advance: Moves frames forward in media such
as movies
22. Screen: Changes the aspect ratio of the screen
23. My button 2 (*)
24. Text: Displays teletext (where available), press again
to superimpose the teletext over a normal broadcast
picture (mix)
25. EPG (Electronic programme guide): Displays the
electronic programme guide
26. Exit: Closes and exits from displayed menus or returns
to previous screen
27. No function
28. Info: Displays information about on-screen content,
shows hidden information (reveal - in TXT mode)
29. Programme +/-
30. Swap: Quickly cycles between previous and current
channels or sources
31. Source: Shows all available broadcast and content
sources
(*) MY BUTTON 1 & MY BUTTON 2:
These buttons may have default functions depending on the
model. However you can set a special function to these buttons
by pressing on them for ve seconds when on a desired source
or channel. A conrmation message will be displayed on the
screen. Now the selected MY BUTTON is associated with
the selected function.
Note that if you perform First Time Installation, MY BUTTON
1&2 will return to their default function.
English - 11 -
Connections
Connector Type Cables Device
Scart
Connection
(back)
VGA
Connection
(back)
SIDE AV(**)
PC/YPbPr
Audio
Connection
(side) YPbPr/PC Audio Cable
SIDE AV(**) PC/YPbPr
Audio
Connection
(side) YPbPr/PC Audio
Cable
Side Audio/Video
Connection Cable
HDMI
Connection
(back)
SPDIF(**) SPDIF
(Coaxial Out)
Connection
(back)
SPDIF(**) SPDIF
(Optical Out)
Connection
(back)
SIDE AV(**)
Side AV
(Audio/Video)
Connection
(side) AV Cable
SIDE AV(**) Side AV
(Audio/Video)
Connection
(side) Audio/Video
Cable
Side Audio/Video
Connection Cable
HEADPHONE Headphone
Connection
(side)
PC to YPBPR YPbPr Video
Connection
(back) PC to YPbPr Connection Cable
USB
Connection
(side)
CI
Connection
(side)
CAM
module
NOTE: When connecting a device
via the YPbPr or the Side AV input, you
must use a connection adapter cable.
See the illustrations on the left side. You
can use YPbPr to VGA cable to enable
YPbPr signal via VGA input. You cannot
use VGA and YPbPr at the same time.
To enable PC/YPbPr audio, you will need
to use the Side AV input with a YPbPr/
PC audio cable for audio connection,
using the Side AV connection cable’s
RED and WHITE inputs (To enable
PC/YPbPr audio, you will need to use
the side audio inputs with a YPbPr/
PC audio cable for audio connection
[Depending on the model]). If an
external device is connected via the
SCART socket, the TV may automatically
switch to AV mode. When receiving
DTV channels (Mpeg4 H.264) or while
in Media Browser mode, output will not
be available via the scart socket. When
using the wall mounting kit (available
from third party in the market, if not
supplied), we recommend that you plug
all your cables into the back of the TV
before mounting on the wall. Insert or
remove the CI module only when the TV
is SWITCHED OFF. You should refer to
the module instruction manual for details
of the settings. The/Each USB input of
your TV supports devices up to 500mA.
Connecting devices that have current
value above 500mA may damage your
TV. By connecting an HDMI cable to your
TV, you have to use only a shielded HDMI
cable to guarantee a sufcient immunity
against parasitic frequency radiation.
If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making
any connection. After the connection is done, you can turn on the units and use them.
(**) Depending on the model
English - 12 -
Switching On/Off
To Switch the TV On
Connect the power cord to a power source such
as a wall socket (220-240V AC, 50 Hz).
To switch on the TV from standby mode either:
• Press the Standby button, Programme +/- or
a numeric button on the remote control.
• Press the side function switch on the TV until
the TV comes on from standby.
To Switch the TV Off
Press the Standby button on the remote control
or press the side function switch on the TV until
the TV switches into standby mode.
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched into standby mode, the
standby LED can blink to indicate that features such as
Standby Search, Over Air Download or Timer is active.
The LED can also blink when you switch on the TV from
standby mode.
First Time Installation
When turned on for the rst time, the language
selection screen is displayed. Select the desired
language and press OK.
On the next screen, set your preferences using
the directional buttons.
Note: Depending on the Country selection you may be
asked to set and conrm a PIN at this point. The selected
PIN cannot be 0000. You have to enter it if you are asked
to enter a PIN for any menu operation later.
About Selecting Broadcast Type
Digital Aerial: If Digital Aerial broadcast search
option is turned on, the TV will search for digital
terrestrial broadcasts after other initial settings
are completed.
Digital Cable: If Digital Cable broadcast search
option is turned on, the TV will search for digital
cable broadcasts after other initial settings are
completed. According to your other preferences
a conrmation message may be displayed before
starting to search. Select YES and press OK to
proceed. To cancel operation, select NO and
press OK. You can select Network or set values
such as Frequency, Network ID and Search
Step. When nished, press OK button.
Note: Searching duration will change depending on the
selected Search Step.
Satellite(**): If Satellite broadcast search
option is turned on, the TV will search for digital
satellite broadcasts after other initial settings are
completed. Before satellite search is performed
some settings should be made. Antenna Type
menu will be displayed first. You can select
Antenna Type as Direct, Single Satellite Cable
or DiSEqC switch by using “ ” or “ ” buttons.
• Direct: If you have a single receiver and a direct
satellite dish, select this antenna type. Press OK
to continue. Select an available satellite on the
next screen and press OK to scan for services.
• Single Satellite Cable: If you have multiple
receivers and a single satellite cable system,
select this antenna type. Press OK to continue.
Congure settings by following instructions on
the next screen. Press OK to scan for services.
• DiSEqC switch: If you have multiple satellite
dishes and a DiSEqC switch, select this
antenna type. Press OK to continue. You can
set four DiSEqC options (if available) on the
next screen. Press OK button to scan the rst
satellite in the list.
Analogue: If Analogue broadcast search
option is turned on, the TV will search for
analogue broadcasts after other initial settings
are completed.
Additionally you can set a broadcast type as your
favourite one. Priority will be given to the selected
broadcast type during the search process and
the channels of it will be listed on the top of
the Channel List. When nished, press OK to
continue.
You can activate Store Mode option at this point.
This option will congure your TV’s settings for
store environment and depending on the TV
model being used, the supported features of it
may be displayed on the top of the screen as
an info banner. This option is intended only for
store use. It is recommended to select Home
Mode for home use. This option will be available
in System>Settings>More menu and can be
turned off/on later.
Press OK button on the remote control to
continue.After the initial settings are completed
TV will start to search for available broadcasts
of the selected broadcast types.
After all the available stations are stored, scan
results will be displayed. Press OK to continue.
The Edit Channel List menu will be displayed
English - 13 -
next. You can edit the channel list according to
your preferences or press the Menu button to
quit and watch TV.
While the search continues a message may
appear, asking whether you want to sort channels
according to the LCN(*). Select Yes and press
OK to conrm.
(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel number sequence (if available).
Note: Do not turn off the TV while initializing rst time
installation. Note that, some options may not be available
depending on the country selection.
Using SatcoDX Feature(**)
You can perform SatcoDX operations using the
Installation>Satellite Settings menu. In the
SatcoDX menu, there are two options regarding
to the SatcoDX.
You can download or upload SatcoDX data. In
order to perform these functions a USB device
must be connected to the TV.
You can upload current services and related
satellites & transponders in TV, to a USB device.
Additionally you can download one of the
SatcoDx les stored in USB device, to the TV.
When you select one of these les, all services
and related satellites and transponders in the
selected le will be stored in the TV. If there are
any installed terrestrial, cable and/or analog
services, they will be kept and only satellite
services will be removed.
Afterwards, check your antenna settings and
make changes if necessary. An error message
stating “No Signal” may be displayed if the
antenna settings are not congured properly.
(**) Limited Models Only
Media Playback via USB Input
You can connect 2.5” and 3.5” inch (hdd with external
power supply) external hard disk drives or USB memory
stick to your TV by using the USB inputs of the TV.
IMPORTANT! Back up the les on your storage
devices before connecting them to the TV.
Manufacturer will not be responsible for any
le damage or data loss. Certain types of USB
devices (e.g. MP3 Players) or USB hard disk
drives/memory sticks may not be compatible
with this TV. The TV supports FAT32 and NTFS
disk formatting.
Wait a little while before each plugging and
unplugging as the player may still be reading les
. Failure to do so may cause physical damage to
the USB player and the USB device itself. Do not
pull out your drive while playing a le.
You can use USB hubs with your TV’s USB
inputs. External power supplied USB hubs are
recommended in such a case.
It is recommended to use the TV’s USB input(s)
directly, if you are going to connect a USB hard
disk.
Note: When viewing image les the Media Browser
menu can only display 1000 image les stored on the
connected USB device.
Media Browser Menu
You can play photo, music, and movie files
stored on a USB disk by connecting it to your
TV. Connect a USB disk to one of the USB inputs
located on the side of the TV. Pressing the Menu
button while in the Media Browser mode will
access the Picture, Sound and Settings menu
options. Pressing the Menu button again will
exit from this screen. You can set your Media
Browser preferences by using the Settings
Menu.
Loop/Shufe Mode Operation
Start playback with the Play
button and activate
All les in the list will be
continuously played in original
order
Start playback with the OK
button and activate
The same le will be played
continuously (repeat)
Start playback with the Play
button and activate
All les in the list will be
played once in random order
Start playback with the Play
button and activate ,
All les in the list will be
continuously played in the
same random order.
English - 14 -
CEC and CEC RC Passthrough
This function allows to control the CEC-enabled
devices, that are connected through HDMI ports
by using the remote control of the TV.
The CEC option in the System>Settings>More
menu should be set as Enabled at rst. Press
the Source button and select the HDMI input of
the connected CEC device from the Sources
List menu. When new CEC source device is
connected, it will be listed in source menu with its
own name instead of the connected HDMI ports
name(such as DVD Player, Recorder 1 etc.).
The TV remote is automatically able to perform
the main functions after the connected HDMI
source has been selected.
To terminate this operation and control the TV via
the remote again, press Quick Menu button on
the remote, highlight the CEC RC Passthrough
and set as Off by pressing Left or Right button.
This feature can also be enabled or disabled
under the System>Settings>More menu.
The TV supports ARC (Audio Return Channel).
This feature is an audio link meant to replace
other cables between the TV and an audio system
(A/V receiver or speaker system).
When ARC is active, the TV does not mute its
other audio outputs automatically. You will need
to decrease TV volume to zero manually if you
wish to hear the ARC audio only (same as optical
or co-axial digital audio outputs). If you want to
change connected device’s volume level, you
should select that device from the source list.
In that case volume control keys are directed to
connected audio device.
Note: ARC is supported only via the HDMI1 input.
System Audio Control
Allows an Audio Amplier/Receiver to be used
with the TV. The volume can be controlled
using the remote control of the TV. To activate
this feature set the Speakers option in the
System>Settings>More menu as Amplier.
The TV speakers will be muted and the sound
of the watched source will be provided from the
connected sound system.
Note: The audio device should support System Audio
Control feature and CEC option should be set as
Enabled.
English - 15 -
TV Menu Contents
System - Picture Menu Contents
Mode You can change the picture mode to suit your preference or requirements. Picture mode can be
set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural.
Contrast Adjusts the light and dark values on the screen.
Brightness Adjusts the brightness values on the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour Sets the colour value, adjusting the colors.
Energy Saving
For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto, Screen
Off or Off.
Note: Available options may differ depending on the selected Mode.
Backlight This setting controls the backlight level. The backlight function will be inactive if the Energy
Saving is set to an option other then Custom.
Advanced Settings
Dynamic Contrast You can change the dynamic contrast ratio to desired value.
Noise Reduction If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce the
amount of noise.
Colour Temp Sets the desired colour temperature value. Cool, Normal, Warm and Custom options are
available.
White Point If the Colour Temp option is set as Custom, this setting will be available. Increase the
‘warmth’ or ‘coolness’ of the picture by pressing Left or Right buttons.
Picture Zoom Sets the desired image size format.
Film Mode Films are recorded at a different number of frames per second to normal television programmes.
Turn this feature on when you are watching lms to see the fast motion scenes clearly.
Skin Tone Skin tone can be changed between -5 and 5.
Colour Shift Adjust the desired colour tone.
RGB Gain (Optional) You can congure the colour temperature values using the RGB Gain feature.
HDMI Full Range While watching from a HDMI source, this feature will be visible. You can use this feature to
enhance blackness in the picture.
PC Position Appears only when the input source is set to VGA/PC.
Autoposition Automatically optimizes the display. Press OK to optimize.
H Position This item shifts the image horizontally to the right hand side or left hand side of the screen.
V Position This item shifts the image vertically towards the top or bottom of the screen.
Dot Clock Dot Clock adjustments correct the interference that appear as vertical banding in dot
intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Phase Depending on the input source(computer etc.) you may see a hazy or noisy picture on the
screen. You can use phase to get a clearer picture by trial and error.
Reset Resets the picture settings to factory default settings (except Game Mode).
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings
while in PC mode.
English - 16 -
System - Sound Menu Contents
Volume Adjusts the volume level.
Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode.
Balance Adjusts whether the sound comes from the left or right speaker.
Headphone
Sets headphone volume.
Please ensure before using headphones that the headphone volume is set to a low level, to
prevent damage to your hearing.
Sound Mode You can select a sound mode (If the viewed channel supports).
AVL (Automatic Volume
Limiting) Sets the sound to obtain xed output level between programmes.
Headphone/Lineout
When you connect an external amplier to your TV using the headphone jack, you can
select this option as Lineout. If you have connected headphones to the TV, set this option
as Headphone.
Please ensure before using headphones that this menu item is set to Headphone. If it is
set to Lineout, the output from the headphone socket will be set to maximum which could
damage your hearing.
Dynamic Bass Enables or disables the Dynamic Bass.
DTS TruSurround Enables or disables the DTS TruSurround.
Digital Out Sets digital out audio type.
English - 17 -
System - Settings Menu Contents
Conditional Access Controls conditional access modules when available.
Language You may set a different language depending on the broadcaster and the country.
Parental
Enter correct password to change parental settings. You can easily adjust Menu Lock, Maturity
Lock, Child Lock or Guidance in this menu. You can also set a new PIN or change the
Default CICAM PIN using the related options.
Note: Some menu options may not be available depending on the country selection in the First Time
Installation. Default PIN can be set to 0000 or 1234. If you have dened the PIN(is requested depending on
the country selection) during the First Time Installation use the PIN that you have dened.
Timers Sets sleep timer to turn off the TV after a certain time. Sets timers for selected programmes.
Date/Time Sets date and time.
Sources Enables or disables selected source options.
Accessibility
Displays accessibility options of the TV.
Hard of Hearing Enables any special feature sent from the broadcaster.
Audio Description
A norration track will be played for the blind or visually impaired audience. Press OK to see all
available Audio Description menu options. This feature is available only if the broadcaster
supports it.
More Displays other setting options of the TV.
Menu Timeout Changes timeout duration for menu screens.
Software Upgrade Ensures that your TV has the latest rmware. Press OK to see the menu options.
Application Version Displays current software version.
Subtitle Mode
This option is used to select which subtitle mode will be on the screen (DVB subtitle / Teletext
subtitle) if both is available. Default value is DVB subtitle. This feature is available only for the
country option of Norway.
Auto TV OFF Sets the desired time for the TV to automatically go into standby mode when not being operated.
Biss Key(**)
Biss is a satellite signal scrambling system that is used for some broadcasts. If you need to
enter Biss key on a broadcast, you can use this setting. Highlight Biss Key and press OK to
enter keys on the desired broadcast.
Store Mode Select this mode for store display purposes. Whilst Store Mode is enabled, some items in the
TV menu may not be available.
Power Up Mode This setting congures the power up mode preference. Last State and Standby options are
available.
CEC With this setting you can enable and disable CEC functionality completely. Press Left or Right
button to enable or disable the feature.
CEC Auto Power On This function allows the connected HDMI-CEC compatible device to turn on the TV and switch
to its input source automatically. Press Left or Right button to enable or disable the feature.
Speakers To hear the TV audio from the connected compatible audio device set as Amplier. You can
use the remote control of the TV to control the volume of the audio device.
OSS Displays Open Source Software license information.
(**) Limited Models Only
English - 18 -
Installation Menu Contents
Automatic channel
scan (Retune)
Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations. Digital
Cable: Searches and stores cable DVB stations. Analogue: Searches and stores analogue stations.
Satellite: Searches and stores satellite stations.
Manual Channel
Scan This feature can be used for direct broadcast entry.
Network Channel
Scan
Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial network
channels. Digital Cable: Searches for cable network channels.
Analogue Fine
Tune
You can use this setting for ne tuning analogue channels. This feature is not available if no analogue
channels are stored.
Satellite
Settings(**)
Displays satellite settings. Satellite list: Displays available satellites. You can Add, Delete satellites or
Edit satellite settings on the list. Antenna installation: You can change satellite anntenna settings and/
or start a satellite scan. SatcoDX: You can upload or download SatcoDX data using the related options.
Installation
Settings (Optional)
Displays installation settings menu. Standby Search: Your TV will search for new or missing channels
while in standby. Any new found broadcasts will be shown.
Clear Service List Use this setting to clear channels stored. This setting is visible only when the Country option is set
to Denmark, Sweden, Norway or Finland.
Select Active
Network
This setting allows you to select only the broadcasts within the selected network to be listed in the
channel list. This feature is available only for the country option of Norway.
First Time
Installation Deletes all stored channels and settings, resets TV to factory settings.
(**) Limited Models Only
English - 19 -
General TV Operation
Using the Channel List
The TV sorts all stored stations in the Channel
List. You can edit this channel list, set favourites
or set active stations to be listed by using the
Channel List options.Press the OK/TV button to
open the Channel List. You can lter the listed
channels by pressing the Blue button or open the
Edit Channel List menu by pressing the Green
button in order to make advanced changes in
the current list.
Managing the Favourite Lists
You can create four different lists of your favourite
channels. Enter the Channel List in the main
menu or press the Green button while the
Channel List is displayed on the screen in order
to open the Edit Channel List menu. Select
the desired channel on the list. You can make
multiple choices by pressing the Yellow button.
Then press the OK button to open the Channel
Edit Options menu and select Add/Remove
Favourites option. Press the OK button again.
Set the desired list option to On. The selected
channel/s will be added to the list. In order to
remove a channel or channels from a favourite
list follow the same steps and set the desired list
option to Off.
You can use the Filter function in the Edit
Channel List menu to filter the channels in
the Channel list permanently according to
your preferences. Using this Filter option, you
can set one of your four favourite lists to be
displayed everytime the Channel list is opened.
The ltering function in the Channel list menu
will only lter the currently displayed Channel
list in order to nd a channel and tune in to it.
These changes will not remain the next time the
Channel list is opened if you don’t save them. To
save the changes on the list press the Red button
after ltering while the Channel list is displayed
on the screen.
Conguring Parental Settings
The Parental Settings menu options can
be used to prohibit users from viewing of
certain programmes, channels and using
of menus. These settings are located in the
System>Settings>Parental menu.
To display parental lock menu options, a PIN
number should be entered. After coding the
correct PIN number, Parental Settings menu
will be displayed.
Menu Lock: This setting enables or disables
access to all menus or installation menus of
the TV.
Maturity Lock: If this option is set, TV gets the
maturity information from the broadcast and if
this maturity level is disabled, disables access
to the broadcast.
Note: If the country option in the First Time Installation
is set as France, Italy or Austria, Maturity Lock’s value
will be set to 18 as default.
Child Lock: If this option is set to ON, the TV can
only be controlled by the remote control. In this
case the control buttons on the TV will not work.
Set PIN: Denes a new PIN number.
Default CICAM PIN: This option will appear as
greyed out if no CI module is inserted into the CI
slot of the TV. You can change the default PIN of
the CI CAM using this option.
Note: Default PIN can be set to 0000 or 1234. If you have
dened the PIN(is requested depending on the country
selection) during the First Time Installation use the PIN
that you have dened.
Some options may not be available depending on the
country selection in the First Time Installation.
Electronic Programme Guide (EPG)
Some channels send information about their
broadcast schedules. Press the Epg button to
view the Programme Guide menu.
There are 3 different types of schedule layouts
available, Timeline Schedule, List Schedule and
Now/Next Schedule. To switch between them
follow the instructions on the bottom of the screen.
Timeline Schedule
Zoom (Yellow button): Press the Yellow button
to see events in a wider time interval.
Filter (Blue button): Views ltering options.
Highlight Genre (Subtitles button): Displays
Highlight Genre menu. Using this feature, you
can search the programme guide database in
accordance with the genre. Info available in the
programme guide will be searched and results
matching your criteria will be highlighted.
Options (OK button): Displays event options.
Event Details (Info button): Displays detailed
information about selected events.
Next/Prev Day (Programme +/- buttons):
Displays the events of previous or next day.
Search (Text button): Displays Guide Search menu.
English - 20 -
Now (Red button): Displays current event of the
highlighted channel.
List Schedule(*)
(*) In this layout option, only the events of the highlighted
channel will be listed.
Prev. Time Slice (Red button): Displays the
events of previous time slice.
Next/Prev Day (Programme +/- buttons):
Displays the events of previous or next day.
Event Details (Info button): Displays detailed
information about selected events.
Filter (Text button): Views ltering options.
Next Time Slice (Green button): Displays the
events of next time slice.
Options (OK button): Displays event options.
Now/Next Schedule
Navigate (Directional buttons): Press the
Directional buttons to navigate through the
channels and programmes.
Options (OK button): Displays event options.
Event Details (Info button): Displays detailed
information about selected events.
Filter (Blue button): Views ltering options.
Event Options
Use the directional buttons to highlight an event
and press OK button to display Event Options
menu. The following options are available.
Select Channel: Using this option, you can
switch to the selected channel.
Set Timer on Event / Delete Timer on Event:
After you have selected an event in the EPG menu,
press the OK button. Select Set Timer on Event
option and press the OK button. You can set a timer
for future events. To cancel an already set timer,
highlight that event and press the OK button. Then
select Delete Timer on Event option. The timer
will be cancelled.
Notes: You cannot switch to any other channel or source
while there is an active timer on the current channel.
It is not possible to set timer for two or more individual
events at the same time interval.
Teletext Services
Press the Text button to enter. Press again to
activate mix mode, which allows you to see the
teletext page and the TV broadcast at the same
time. Press once more to exit. If available, sections
in the teletext pages will become colour-coded and
can be selected by pressing the coloured buttons.
Follow the instructions displayed on the screen.
Digital Teletext
Press the Text button to view digital teletext
information. Operate it with the coloured buttons,
cursor buttons and the OK button. The operation
method may differ depending on the contents
of the digital teletext. Follow the instructions
displayed on the digital teletext screen. When
the Text button is pressed again, the TV returns
to television broadcast.
Software Upgrade
Your TV is capable of nding and updating the
rmware automatically via the broadcast signal.
Software upgrade search via user
interface
On the main menu select System>Settings and
then More. Navigate to Software upgrade and
press the OK button. In Upgrade options menu
select Scan for upgrade and press OK button
to check for a new software upgrade.
If a new upgrade is found, it starts to
download the upgrade. After the download is
completed, a warning will be displayed, press
OK button to complete software upgrade
process and restart TV.
3 AM search and upgrade mode
Your TV will search for new upgrades at 3:00
o’clock if Automatic scanning option in the
Upgrade options menu is set to Enabled and if
the TV is connected to an aerial signal. If a new
software is found and downloaded successfully,
it will be installed at the next power on.
Note: Do not unplug the power cord while led is blinking
during the reboot process. If the TV fails to come on
after the upgrade, unplug, wait for two minutes then
plug it back in.
Troubleshooting & Tips
Tv will not turn on
Make sure the power cord is plugged in securely
to a wall outlet. Press the Power button on the TV.
Poor picture
• Check if you have correctly tuned the TV.
• Low signal level can cause picture distortion.
Please check antenna connections.
• Check if you have entered the correct channel
frequency if you have performed manual tuning.
English - 21 -
No picture
• TV is not receiving any signal. Make sure the
correct source has been selected.
• Is the antenna connected properly?
• Is the antenna cable damaged?
• Are suitable plugs used to connect the antenna?
• If you are in doubt, consult your dealer.
No sound
• Check if the TV sound is muted. Press the Mute
button or increase the volume to check.
• Sound is coming from only one speaker. Check
the balance settings from Sound menu.
Remote control - no operation
• The batteries may be exhausted. Replace the
batteries.
• The batteries maybe inserted incorrectly. Refer
to the section “Inserting the Batteries into the
Remote”.
No signal on an input source
• It is possible that no device is connected.
• Check the AV cables and connections from
your device.
• Check the device is switched on.
PC Input Typical Display Modes
The following table is an illustration of some of
the typical video display modes. Your TV may
not support all resolutions. Your TV supports up
to 1920x1080.
Index Resolution Frequency
1640x480 60 Hz
2800x600 56 Hz
3800x600 60 Hz
41024x768 60 Hz
51024x768 66 Hz
61280x768 60 Hz
71280x960 60 Hz
81280x1024 60 Hz
91360x768 60 Hz
10 1400x1050 60 Hz
11 1600x1200 60 Hz
12 1920x1080 60 Hz
AV and HDMI Signal Compatibility
Source Supported Signals Available
EXT
(SCART)
PAL 50/60 O
NTSC 60 O
RGB 50 O
RGB 60 O
Side AV
PAL 50/60 O
NTSC 60 O
PC/YPbPr
480I, 480P 60Hz O
576I, 576P 50Hz O
720P 50Hz,60Hz O
1080I 50Hz,60Hz O
1080P 50Hz,60Hz O
HDMI
480I 60Hz O
480P 60Hz O
576I, 576P 50Hz O
720P 50Hz,60Hz O
1080I 50Hz,60Hz O
1080P
24Hz, 25Hz
30Hz, 50Hz,
60Hz
O
(X: Not Available, O: Available)
In some cases a signal on the TV may not be
displayed properly. The problem may be an
inconsistency with standards from the source
equipment (DVD, Set-top box, etc. ). If you do
experience such a problem please contact your
dealer and also the manufacturer of the source
equipment.
English - 22 -
Supported File Formats for USB Mode
Media Extension Format Notes
Video .mpg,
.mpeg MPEG1-2 MPEG1: 768x576 @ 30P, MPEG2:1920x1080 @ 30P
.vob MPEG2
1920x1080 @ 30P
.mp4 MPEG4, Xvid,
H.264
.mkv H.264,
MPEG4,VC-1
.avi MPEG2,
MPEG4, Xvid,
H.264
.v H.264/VP6/
Sorenson
H.264/VP6: 1920x1080 @ 30P
Sorenson: 352x288 @ 30P
.mp4, .mov,
.3gpp, .3gp,
MPEG
transport
stream,
.ts,.trp, .tp,
.mkv
HEVC/H.265 1080P@60fps - 50Mbps
.3gp MPEG4 , H.264 1920x1080 @ 30P
Audio .mp3 MPEG1 Layer
2/3
Layer2: 32Kbps ~ 448Kbps (Bit rate) / 32kHz, 44.1kHz, 48kHz, 16kHz,
22.05kHz, 24kHz (Sampling rate)
Layer3: 32Kbps ~ 320Kbps (Bit rate) / 32kHz, 44.1kHz, 48kHz, 16kHz,
22.05kHz, 24kHz, 8kHz, 11.025kHz, 12kHz (Sampling rate)
(works
only with
video
les)
AC3 32Kbps ~ 640Kbps (Bit rate) / 32kHz, 44.1kHz, 48kHz (Sampling rate)
AAC 16Kbps ~ 576Kbps (Bit rate) / 48kHz, 44.1kHz, 32kHz, 24kHz, 22.05kHz,
16kHz, 12kHz, 11.025kHz, 8kHz (Sampling rate)
EAC3 32Kbps ~ 6Kbps (Bit rate) / 32kHz, 44.1kHz, 48kHz (Sampling rate)
LPCM Unsigned 8bit PCM, Signed/Unsigned 16bit PCM (big / little endian), 24bit
PCM (big endian), DVD LPCM 16/20/24bit (Bit rate)
/ 6kHz, 8kHz, 11.025kHz, 12kHz, 16kHz, 22.05kHz, 24kHz, 32kHz,
44.1kHz, 48kHz , 88.2kHz, 96kHz, 176.4kHz, 192kHz (Sampling rate)
IMA-ADPCM/
MS-ADPCM 384Kbps (Bit rate) / 8KHz ~ 48Khz (Sampling rate)
LBR 32Kbps ~ 96Kbps (Bit rate) / 32kHz, 44.1kHz, 48kHz (Sampling rate)
Picture
.jpeg
Baseline Resolution(WxH): 17000x10000
Progressive Resolution(WxH): 4000x4000
.bmp - Resolution(WxH): 5760x4096
Subtitle .sub, .srt - -
English - 23 -
Supported DVI Resolutions
When connecting devices to your TV’s connectors by using DVI converter cable(DVI to HDMI cable
- not supplied), you can refer to the following resolution information.
56Hz 60Hz 66Hz 70Hz 72Hz 75Hz
640x400 þ
640x480 þ þ þ þ
800x600 þ þ þ þ þ
832x624 þ
1024x768 þ þ þ þ þ
1152x864 þ þ þ
1152x870 þ
1280x768 þ þ
1360x768 þ
1280x960 þ þ
1280x1024 þ þ
1400x1050 þ þ
1440x900 þ þ
1600x1200 þ
1680x1050 þ
1920x1080 þ
English - 24 -
DVD Mode (Limited Models Only)
Safety Information
CAUTION
DVD Player is a class 1 laser product. However
this product uses a visible laser beam which could
cause hazardous radiation exposure. Be sure to
operate the player correctly as instructed.
CLASS 1
LASER PRODUCT
RISK OF ELECTRIC SHOCK
The lightning ash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufcient magnitude to constitute a risk of
electric shock of persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
Notes on Discs
On handling discs
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface.
• Do not stick paper or tape on the disc.
• If the disc is contaminated with any substance
like glue remove before using it.
• Do not expose the disc to direct sunlight or heat
sources such as hot air ducts, or leave it in a
car parked in direct sunlight as the temperature
can rise quickly and damage the disc.
• After playing, store the disc in its case.
On cleaning
• Before playing, clean the disc with a cleaning
cloth. Wipe the disc from the center out.
• Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static
spray intended for vinyl LPs.
Licence Notication
• This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use
of this copyright protection technology must
be authorized by Rovi Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
How to Watch a DVD
When placing a disc into the loader, labelled side
of the disc should be on the front.
When TV set is turned on, rst switch to DVD
source by using the Source button on the remote
control. Press play on the remote control, or
directly press play button on the side panel. If
there is no disc inside the loader, place a DVD
rst and press play.
Note: If you switch to another source by pressing
Source, Swap or Programme +/- buttons on the
remote control, DVD playback will be paused
automatically. You should press Play button and
resume the playback manually when you switch
to DVD mode.
DVD Control Panel Buttons
/ (Play / Pause)
Plays/pauses the disc. When DVD menu (root
menu) is active, this button functions as “button
select” (selects the highlighted item in menu) if
this is not prohibited by the disc.
/ (Stop / Eject)
Stop playing disc / Eject or Load the disc.
Note:
• You cannot eject the disc via the remote control.
• While playing a le, you should press STOP
button three times to eject.
English - 25 -
General Playback
Basic Play
1. Press the Standby button
2. Please insert a disc into the loader.
The disc will be automatically loaded and play will
commences if the disc does not have any menus
recorded on it.
A menu may appear on the TV screen after a few
moments or the lm may start immediately. This
behaviour depends on the disc content and may
change.
Note: Step 3 and 4 is available only when a menu is
recorded on the disc.
3. Press Down / Up / Left / Right or the numeric
button (s) to select the preferred title.
4. Press OK.
To conrm the selected items. The played item
may be a motion picture, a still picture or another
submenu depending on the disc.
For your reference:
If an action corresponding to a button is prohibited the “
” symbol appears.
Notes on Playback:
1. No sound will be heard during Rapid advance
or Rapid reverse.
2. No sound will be heard during Slow motion play.
3. Reverse slow motion play may not be available
depending on the dvd content.
4. In some cases, the subtitle language is not
changed immediately to the selected one.
5. When the preferred language is not selected even
after pressing the button several times, it means
that the language is not available on the disc.
6. When the player is restarted or the disc is
changed, the subtitle selection is automatically
changed back to the initial settings.
7. If a language is selected, not supported by the
disc, the subtitle language will automatically be
set to the disc’s priority language.
8. Usually a circulation will happen while switching
to another language, that is you can cancel
the subtitle by pressing this button a number
of times until “Subtitles Off” appears on the
screen.
9. When the power is turned on or the disc is
removed, the language heard is the one
selected at the initial settings. If this language
is not recorded on the disc, only the available
language on the disc will be heard.
10. Some DVDs may not contain root and/or title
menus.
11. Reverse stepping is not available.
12. For your convenience:
If you attempt to enter a number greater than
the total time of the current title, the time
search box disappears and “ Input Invalid”
message appears on up-left corner of screen.
13. Slide Show is disabled when the ZOOM mode
is on.
DVD Troubleshooting
Poor picture quality (DVD)
• Make sure the DVD disc surface is not damaged.
(Scratch, ngerprint etc.)
• Clean the DVD disc and try again.
See instructions described in “Notes on Discs” to clean
your disc properly.
• Ensure that the DVD disc is in the tray with the
label facing forward.
• A damp DVD disc or condensation may effect the
equipment. Wait for 1 to 2 hours in Stand-by to
dry the equipment.
Disc does not play
• No disc in the machine. Place a disc into the loader.
• Disc incorrectly loaded.
Ensure that the DVD disc is in the tray with the label
facing forward.
• Wrong type of disc. The machine cannot play
CD-ROMS etc. The region code of the DVD must
match the player.
Wrong OSD language
• Select the language in the set-up menu.
• The language for the sound or subtitles on a DVD
cannot be changed.
• Multilingual sound and/or subtitles not recorded
on the DVD.
• Try to change the sound or subtitles using DVD’s
title menu. Some DVD’s do not allow the user to
change these settings without using the disc’s
menu
• These functions are not available on the DVD.
No picture
• Make sure you have pressed the correct buttons
on the remote control. Try once more.
No sound
• Check if volume is set to an audible level.
• Make sure the sound isn’t turned off by mistake.
Distorted sound
• Check that the appropriate listening mode setting
is correct.
If nothing works
If you have tried the above solutions and none seem
to work, try switching your TV-DVD off and on again.
If this does not work, contact your supplier or TV-
DVD repair technician. Never attempt to repair a
defective TV-DVD yourself.
English - 26 -
Disc Types Compatible with This Unit
Disc Types
(Logos)
Recording
Types
Disc
Size
Max.
Playing
Time
Characteristics
DVD Audio
+
Video
12 cm
Single-
sided; 240 min.
Double-
sided; 480 min.
• DVD contains excellent sound
and video due to Dolby Digital and
MPEG-2 System.
• Various screen and audio functions
can be easily selected through the
on screen menu.
AUDIO-CD
Audio 12 cm 74 min.
• An LP is recorded as an analog
signal with more distortion. CD is
recorded as a Digital Signal with
better audio quality, Iess distortion
and less deterioration of audio
quality over time.
MP3-CD Audio
(xxxx.mp3) 12 cm
It depends
on MP3
quality.
• MP3 is recorded as a Digital Signal
with better audio quality, less
distortion and less deterioration of
audio quality over time.
PICTURE-CD Video
(still picture) 12 cm
It depends
on JPEG
quality.
• JPEG is recorded as a Digital
Signal with better picture quality
over time.
For proper operation, only 12 cm discs must be used.
Specications
Types of Discs
Supported
DVD: SS/SL 4.7” (DVD-5)
SS/DL 4.7” (DVD-9)
DS/SL 4.7” (DVD-10)
DS/DL 4.7” (DVD-18)
CD-DA
CD-R
CD-RW
MP-3/JPEG
Video Type
MPEG-2 Video Standard Decoding (MPEG-1 supported)
Full-Screen Video Display of 720 x 576 (PAL) & 720 x 480 (NTSC) pixels
50 and 60 Hz frame refresh rates (PAL & NTSC)
Digital bit-stream processing rate up to 108Mbits/sec
Line resolution more than 500 lines
Audio Type MPEG Multichannel Decoding
LPCM
Audio Output Analog Outputs:
24 bit /48, 44.1kHz down-sampling DAC
English - 27 -
Overview of the Remote Control
1. Standby
2. Numeric buttons
3. Mute
4. Volume Up / Down
5. TV Menu
6. Navigation buttons
7. OK / Select
8. Angle
9. Display time / DVD menu
10. Coloured buttons;
Red button - Zoom
Green button - Repeat
Yellow button - Root
Blue button - Title
11. Language selection
12. Rapid reverse
13. Pause
14. Play
15. Subtitle
16. Stop
17. Rapid advance
18. Image size
19. Search mode
20. Exit
21. Info
22. Source
Note: Buttons not indicated with a number are
not functional in DVD mode.
English - 28 -
General DVD Operation (depending on model)
You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your
remote control. Below are main functions of commonly used remote control buttons.
Buttons DVD Playback Movie
Playback
Picture Playback Music Playback
Play Play Play Play
Pause Pause Pause Pause
Stop Stop Stop Stop
/ Skip backward/
forward
Skip backward/
forward Rotate Skip backward/forward
/ Highlights a menu item / Shifts the zoomed picture up or down (if available).
/ Rapid advance / Rapid reverse
MEDIA BROWSER Views the scene from different angles
(if available)
Changes slide effect
(depends on the
content)
X
MY BUTTON 1 Displays time / Views main setup menu
INFO Time counter mode selection (during playback). Press repeatedly to switch between modes.
LANGUAGE Auto language X X
MENU Displays TV menu.
OK Enter / View / Play
GREEN BUTTON Displays repeat options.
RETURN/BACK Returns back to the previous menu (if available).
YELLOW BUTTON Goes back to the root folder (if available).
MY BUTTON 2 (*) Direct selection of scenes or time. Selects the desired file. Selects the desired file.
SUBTITLES Subtitle on-off. Press repeatedly to switch
between subtitle options. X X
BLUE BUTTON Displays disc menu
(if available).
Displays disc menu
(if available). X X
RED BUTTON Zooms picture. Press repeatedly to switch between zoom options.
Other Functions – Button Combinations (During playback)
+ Slow forward
( + ) + Sets slow forward speed
+ Sets rapid advance speed
+ Sets rapid reverse speed
+ Conrms stop command
(*) You can switch to title by pressing numeric keys directly. You need to press 0 and then digit key
to switch one digit titles (example: to select 5, press 0 and 5).
English - 29 -
We’re here to help. Find out all you need to know about the latest, trend-setting TV technology on our website.
www.toshiba-tv.com
You can review your TV user manual online or download as you like
