Toshiba MG08SCP16TE User Manual

Displayed below is the user manual for MG08SCP16TE by Toshiba which is a product in the Internal Hard Drives category. This manual has pages.

Related Manuals

Toshiba B-EX4T1-GS12 Manual

Toshiba AT10-A-104 Manual

Toshiba IK-WD05A Manual

Toshiba IK-WR05A Manual

Toshiba NVSPRO Manual

Toshiba RAS-3M18SAV-E Manual

Toshiba C50D-B-11M Manual

Toshiba XVSV Manual

1 / 16

Enterprise Capacity HDD MG08 Series Product Manual

Rev. 03: July, 2021

SPECIFICATIONS

Item

MG08ACA16TA

MG08ACA16TE

MG08ACA16TAY

MG08ACA16TEY

MG08ACP16TA

MG08ACP16TE

MG08ACA14TA

MG08ACA14TE

MG08ACA14TAY

MG08ACA14TEY

MG08SCA16TA

MG08SCA16TE

MG08SCA16TAY

MG08SCA16TEY

MG08SCP16TA

MG08SCP16TE

MG08SCA14TA

MG08SCA14TE

MG08SCA14TAY

MG08SCA14TEY

Interface SATA-3.3 SAS-3.0

Formatted Capacity 16TB 14TB 16TB 14TB

Performance

Interface Speed 6.0 Gbit/s, 3.0 Gbit/s, 1.5 Gbit/s 12.0 Gbit/s, 6.0 Gbit/s, 3.0 Gbit/s, 1.5 Gbit/s

Rotation Speed 7200 rpm

Buffer Size 512 MiB [8]

Maximum Sustained

Data Transfer Speed

[7]

(Typ.)

262 MiB/s

Logical Data Block

Length

MG08xxxxxxA/AY

( fixed length )

4096 B 4096 B / 4160 B

MG08xxxxxxE/EY

(emulation)

[9]

Host:512 B, Disk:4096 B

Host:520 B, Disk:4160 B

Supply Voltage Allowable Voltage 12 V [10] ± 10 % / 5 V [10] + 10 % / -7 % [11]

Power

Consumption

Random Write / Read

4KB Q1 (Typ.)

7.63 W 8.12 W

Active Idle (Idle-A)

4.00 W

4.46 W

Acoustics

[12]

Active Idle (Typ.)

20 dB

• Industry Standard 3.5-inch 26.1 mm Height Form Factor

• Conventional Magnetic Recording (CMR) 16 / 14 TB for

broad compatibility

• Industry-leading 9-disk helium-sealed design for

superior storage density

• 7200 rpm Performance

• 550 Total TB Transferred per Year Workload Rating [5]

• 512e or 4Kn Advanced Format Sector Technology;

(512e Model) Includes Toshiba Persistent Write Cache

Technology for Data-Loss Protection in Sudden Power-

Loss Events

• Sanitize Instant Erase (SIE) and Self-Encrypting

Drive(SED) option model [6]

• Cloud-scale Sever and Storage Infrastructure

• Software-defined data center infrastructure

• File- and Object-based storage infrastructure

• Tiered Storage Infrastructure

• Workloads and Use-Cases that Benefit from High

Capacity per Spindle

• Capacity-Optimized Cloud-scale and Rack-Scale

Storage Systems

• Compliance Data Life-Cycle Management

• Data Center Data-Protection and Data Back-up

Infrastructure

Using an industry-leading[1] 9-disk design pioneered by Toshiba, the MG08 Series

provides 16 / 14 TB[2] of conventional magnetic recording (CMR) capacity and 7200

rpm performance. The industry-standard 3.5-inch[3] form-factor integrates easily into

cloud-scale storage infrastructure, business-critical servers and storage, and File

and Object storage solutions. Toshiba’s precision industrial laser welding technology

is put to use to seal helium inside the 9-disk mechanics. The massive 16 / 14 TB

capacity is delivered using proven CMR recording technology providing optimum

application compatibility and data reliability. Available with either a SATA 6.0 Gbit/s

or a 12.0 Gbit/s SAS interface [4], the MG08 Series models integrate easily into

standard 3.5-inch drive bays to help reduce the footprint and operational burden of

cloud-scale storage infrastructure, and business critical servers and storage

systems.

MG08 SERIES

ENTERPRISE CAPACITY HDD

Product image may represent a design model.

KEY FEATURES APPLICATIONS

2 / 16

Enterprise Capacity HDD MG08 Series Product Manual

Rev. 03: July, 2021

ENVIRONMENTAL LIMITS

[1] Source: Toshiba Electronic Devices & Storage Corporation, as of January, 2019 for the 3.5-inch, 26.1mm height.

[2] Definition of capacity: Toshiba defines a terabyte (TB) as 1 000 000 000 000 bytes. A computer operating system, however, reports storage capacity using powers

of 2 for the definition of 1 TB = 240 = 1 099 511 627 776 bytes and therefore shows less storage capacity. Available storage capacity (including examples of various

media files) will vary based on file size, formatting, settings, software and operating system, such as Microsoft Operating System and/or pre-installed software

applications, or media content. Actual formatted capacity may vary.

[3] "3.5-inch" mean the form factor of HDDs. They do not indicate drive's physical size.

[4] Read and write speed may vary depending on the host device, read and write conditions, and file size.

[5] Workload is defined as the amount of data written, read or verified by commands from host system.

[6] SED supports TCG Enterprise SSCs. And the HDDs which have any security function may not be available in the countries where the use of such HDDs is prohibited

or limited due to export control and local regulations.

[7] The maximum sustained data rate and interface speed may be restricted to the response speed of host system and by transmission characteristics.

1 Gbit/s = 1 000 000 000 bits/s. 1 MiB/s = 1 048 576 bytes/s

[8] A mebibyte (MiB) means 220, or 1 048 576 bytes.

[9] Read–modify-write is supported.

[10] Input voltages are specified at the HDD connector side, during HDD ready state.

[11] Make sure the value is not less than -0.3 V DC (less than -0.6 V, 0.1 ms) when turning on or off the power.

[12] The measuring method is based on ISO 7779.

[13] Non-operating condition (except storage condition) assumes short term transportation.

[14] The range of altitude is 3048 m or less. Up to 55 °C at 7620 m. Up to 40 °C at 12 192 m.

[15] Vibration applied to the HDD is measured at near the mounting screw hole on the frame as much as possible.

[16] At random seek write/read and default on retry setting with log sweep vibration.

[17] At power-off state after installation

MG04ACAxxxA / MG04ACAxxxE

MG04ACA50DA / MG04ACA50DE

Item Specification

Ambient temperature

Operating

5 °C to 55 °C

(No condensation)

Non-Operating

[13] [14]

-40 °C to 70 °C

(No condensation)

Relative Humidity

Operating

5 % to 90 % R.H. (No condensation)

Non-Operating

5 % to 95 % R.H. (No condensation)

Altitude Operating - 305 m to 3048 m

Non-Operating [13] [14] - 305 m to 12 192 m

Shock [15]

Operating

686 m/s2 { 70 G } ( 2 ms duration )

Non-Operating

2450 m/s2 { 250 G } ( 2 ms duration )

Vibration [15] Operating [16] 7.35 m/s2 { 0.75 G } ( 5 to 300 Hz )

2.45 m/s2 { 0.25 G } ( 300 to 500 Hz )

Non-Operating

[17]

29.4 m/s2 { 3.0 G } ( 5 to 500 Hz )

3 / 16

Enterprise Capacity HDD MG08 Series Product Manual

Rev. 03: July, 2021

RELIABILITY

[18] MTTF (Mean Time to Failure) of the HDDs during its life time is 2.5 million hours and AFR(Annualized Failure Rate) is 0.35 %. This assumes 8760 h/year power on

hours (24 hours per one day, 7 days per one week), up to 550 TB/year total data transfers, and average HDA surface temperature:40 °C or less. Use at case HDA

surface temperature above 40 °C may degrade product reliability and reduce warranty period.

MODEL NUMBERS

Item Specification

MTTF / AFR

[18]

2 500 000 hours / 0.35 %

Non-recoverable Error Rate

10 error per 1016 bits read

Load / Unload

600 000 times

Availability

24 hours/day, 7 days/week

Rated Annual Workload

(Total TB Transferred per Year, R/W) 550 TB per year

Model Number Interface Formatted

Capacity

Sector Format Optional

Security

MG08ACA16TA

SATA-3.3

16 TB

4Kn

MG08ACA16TE SATA-3.3 16 TB 512e

MG08ACA16TAY SATA-3.3 16 TB 4Kn SIE

MG08ACA16TEY SATA-3.3 16 TB 512e SIE

MG08ACP16TA SATA-3.3 16 TB 4Kn SED

MG08ACP16TE SATA-3.3 16 TB 512e SED

MG08ACA14TA SATA-3.3 14 TB 4Kn

MG08ACA14TE SATA-3.3 14 TB 512e

MG08ACA14TAY SATA-3.3 14 TB 4Kn

SIE

MG08ACA14TEY

SATA-3.3

14 TB

512e

SIE

MG08SCA16TA

SAS-3.0

16 TB

4Kn

MG08SCA16TE SAS-3.0 16 TB 512e

MG08SCA16TAY SAS-3.0 16 TB 4Kn SIE

MG08SCA16TEY SAS-3.0 16 TB 512e SIE

MG08SCP16TA SAS-3.0 16 TB 4Kn SED

MG08SCP16TE SAS-3.0 16 TB 512e SED

MG08SCA14TA SAS-3.0 14 TB 4Kn

MG08SCA14TE SAS-3.0 14 TB 512e

MG08SCA14TAY SAS-3.0 14 TB 4Kn

SIE

MG08SCA14TEY

SAS-3.0

14 TB

512e

SIE

4 / 16

Enterprise Capacity HDD MG08 Series Product Manual

Rev. 03: July, 2021

MARKING

1) WEEE

2) Names and Contents of Hazardous Substances or Elements in Products

产品中有害物质的名称及含量

部件名称

有害物质

铅（Pb）汞（Hg）镉（Cd）六价铬

（

Cr(VI)

）

多溴联苯

（

PBB

）

多溴二苯醚

（

PBDE

）

HDD(

硬盘驱动器

)

○

本表格依据

SJ/T 11364

的规定编制。

○：表示该有害物质在该部件所有均质材料中的含量均在

GB/T 26572

规定的限量要求以下。

：表示该有害物质至少在该部件的某一均质材料中的含量超出

GB/T 26572

规定的限量要求。

中华人民共和国环保使用期限

Following information is only for EU-member states:

The use of the symbol indicates that this product may not be

treated as household waste. By ensuring this product is

disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which

could otherwise be caused by inappropriate waste handling of this product. For more

detailed information about recycling of this product, please contact your local city office,

your household waste disposal service or the shop where you purchased the product.

5 / 16

Enterprise Capacity HDD MG08 Series Product Manual

Rev. 03: July, 2021

SAFETY / EMC STANDARDS

Title Region

(Underwriters Laboratories)

USA

CSA

(Canadian Standard Association)

Canada

TÜV

(Technischer Überwachungs Verein)

Germany

BSMI

(Bureau of Standards, Metrology and Inspection)

Taiwan

MSIP (Note 1)

(Ministry of Science, ICT & Future Planning)

Korea

ACMA

(Australian Communications and Media Authority)

Australia and New Zealand

(Note 1) Marks of KC

Made in Japan

Made in Philippines

B 급 기기

(가정용 방송통신기자재)

이 기기는 가정용 (B 급) 전자파 적합 기기로서 주

로 가정에서 사용하는 것을 목적으로 하며, 모든

지역에서 사용할 수 있습니다.

기기의

명칭

(

모델명

): MG08ACA16T A/E/AY/EY / MG08ACP16T A/E / MG08ACA14T A/E/AY/EY

2. 인증번호: R-R-T48-MG08ACA16TE

3. 인증받은 자의 상호: TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION

4. 제조년월일: 2018-12

5. 제조자 / 제조국가: TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION / 중국

기기의

명칭

(

모델명

): MG08SCA16T A/E/AY/EY, MG08SCP16T A/E / MG08SCA14T A/E/AY/EY

2. 인증번호: R-R-T48-MG08SCA16TE

3. 인증받은 자의 상호: TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION

4. 제조년월일: 2018-12

5. 제조자 / 제조국가: TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION / 중국

1. 기기의 명칭(모델명): MG08ACA16T A/E/AY/EY / MG08ACP16T A/E / MG08ACA14T A/E/AY/EY

2. 인증번호: R-R-T48-MG08ACA16TE

3. 인증받은 자의 상호: TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION

4. 제조년월일: 2018-12

5. 제조자 / 제조국가: TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION / 필리핀

기기의

명칭

(

모델명

): MG08SCA16T A/E/AY/EY, MG08SCP16T A/E / MG08SCA14T A/E/AY/EY

2. 인증번호: R-R-T48-MG08SCA16TE

3. 인증받은 자의 상호: TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION

4. 제조년월일: 2018-12

5. 제조자 / 제조국가: TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION / 필리핀

6 / 16

Enterprise Capacity HDD MG08 Series Product Manual

Rev. 03: July, 2021

CE Marking

The drive satisfies the following standards.

Category Applied standard Issued year Comment

EMC

2014/30/EU

Emission:

EN55032

2015

Class B (including domestic environment)

Immunity:

EN55035

2017

Product immunity standard for IT-equipment

RoHS

2011/65/EU

EN50581

2012

Category 3

7 / 16

Enterprise Capacity HDD MG08 Series Product Manual

Rev. 03: July, 2021

MECHANICAL SPECIFICATIONS

MG08ACA16T / 14T

MG08ACP16T

[Unit:

mm]

Item Specification

Width (Max)

101.85 mm

Height (Max)

26.1 mm

Length (Max)

147.0 mm

Weight (Max.(Typ.))

720 g (694 g)

8 / 16

Enterprise Capacity HDD MG08 Series Product Manual

Rev. 03: July, 2021

MG08SCA16T / 14T

MG08SCP16T

[Unit: mm]

9 / 16

Enterprise Capacity HDD MG08 Series Product Manual

Rev. 03: July, 2021

INTERFACE CONNECTOR

SATA plug connector overview

(MG08ACA16T / 14T)

(MG08ACP16T)

SAS plug connector overview

(MG08SCA16T / 14T)

(MG08SCP16T)

10 / 16

Enterprise Capacity HDD MG08 Series Product Manual

Rev. 03: July, 2021

INTERFACE CONNECTOR (SATA plug) SIGNAL ALLOCATION

(MG08ACA16T / 14T)

(MG08ACP16T)

Notice: This drive uses 5 V and 12 V power. 3.3 V power is not used.

HDA (Head Disk Assembly) and DC ground (ground pins on interface) are connected electrically each other.

Segment Pin No. Pin Definition

Signal Segment

GND

Mate

A+

Differential Pair A from PHY (Device Rx+)

A-

Differential Pair A from PHY (Device Rx-)

GND

Mate

B-

Differential Pair B from PHY (Device Tx-)

B+

Differential Pair B from PHY (Device Tx+)

GND

Mate

Power Segment

－

(Unused)

P2 － (Unused)

PWDIS

Enter/Exit Power Disable (Option)

GND

Mate

P5 GND

2nd Mate

P6 GND 2nd Mate

5 V Power Pre-Charge 2

Mate

5 V Power

P9 V5 5 V Power

P10 GND 2nd Mate

P11 Spin - Staggered Spin-up Mode Detect (Input)

ACT

- Activity LED Drive (Output)

P12

GND

Mate

P13 V12 12 V Power Pre-Charge 2nd Mate

P14

V12

12 V Power

P15

V12

12 V Power

11 / 16

Enterprise Capacity HDD MG08 Series Product Manual

Rev. 03: July, 2021

INTERFACE CONNECTOR (SAS plug) SIGNAL ALLOCATION

(MG08SCA16T / 14T)

(MG08SCP16T)

(*1) Do not supply 3.3 V power if POWER DISABLE feature is used.

(*2) The terminal P3 is used as POWER DISABLE control signal in SAS-3. This terminal connects with the GROUND or is an OPENED thing on the host side when the

POWER DISABLE function is not used.

Segment Pin No. Pin Definition

Signal Segment

GND

GND for SAS Primary Port

RP+ SAS Primary Port Receive (positive) signal

RP- SAS Primary Port Receive (negative) signal

GND GND for SAS Primary Port

TP- SAS Primary Port Transmit (negative) signal

TP+ SAS Primary Port Transmit (positive) signal

GND GND for SAS Primary Port

S8 GND GND for SAS Secondary Port

S9 RS+ SAS Secondary Port Receive (positive) signal

S10 RS- SAS Secondary Port Receive (negative) signal

S11 GND GND for SAS Secondary Port

S12 TS- SAS Secondary Port Transmit (negative) signal

S13 TS+ SAS Secondary Port Transmit (positive) signal

S14 GND GND for SAS Secondary Port

Power Segment

P1 (*1) Reserved Do not supply 3.3 V power if POWER DISABLE

Function is used.

P2 (*1)

Reserved

P3 (*2) POWER

DISABLE

Power Disable Control input signal

P4 GND GROUND

P5 GND GROUND

GND

GROUND

+5 V-Charge

Pre-charge pin for +5 V

P8 +5 V +5 V power supply input

P9 +5 V +5 V power supply input

P10

GND

GROUND

P11

READY LED

READY LED output

P12

GND

GROUND

P13 +12 V-Charge Pre-charge pin for +12 V

P14 +12 V +12 V power supply input

P15 +12 V +12 V power supply input

12 / 16

Enterprise Capacity HDD MG08 Series Product Manual

Rev. 03: July, 2021

SATA COMMAND TABLE (Part 1)

(MG08ACA16T / 14T)

(MG08ACP16T)

Op-Code Command Name

78h ACCESSIBLE MAX ADDRESS CONFIGURATION

E5h/98h CHECK POWER MODE

92h DOWNLOAD MICROCODE

93h DOWNLOAD MICROCODE DMA

90h EXECUTE DIAGNOSTICS

E7h FLUSH CACHE

EAh FLUSH CACHE EXT

ECh IDENTIFY DEVICE

E3h/97h IDLE

E1h/95h IDLE IMMEDIATE

91h INITIALIZE DEVICE PARAMETERS

00h NOP

E4h READ BUFFER

C8h READ DMA

25h READ DMA EXT

60h READ FPDMA QUEUED

2Fh READ LOG EXT

47h READ LOG DMA EXT

C4h READ MULTIPLE

29h READ MULTIPLE EXT

20h READ SECTOR(S)

24h READ SECTOR(S) EXT

40h READ VERIFY SECTOR(S)

42h READ VERIFY SECTOR(S) EXT

13 / 16

Enterprise Capacity HDD MG08 Series Product Manual

Rev. 03: July, 2021

SATA COMMAND TABLE (Part 2)

(MG08ACA16T / 14T)

(MG08ACP16T)

Op-Code Command Name

1xh RECALIBRATE

0Bh REQUEST SENSE DATA EXT

B4h SANITIZE DEVICE

F1h SECURITY SET PASSWORD

F2h SECURITY UNLOCK

F3h SECURITY ERASE PREPARE

F4h SECURITY ERASE UNIT

F5h SECURITY FREEZE LOCK

F6h SECURITY DISABLE PASSWORD

70h – 76h

79h – 7Fh

SEEK

77h SET DATE & TIME EXT

EFh SET FEATURES

C6h SET MULTIPLE MODE

E6h/99h SLEEP

B0h SMART Function Set

E2h/96h STANDBY

E0h/94h STANDBY IMMEDIATE

E8h WRITE BUFFER

CAh WRITE DMA

35h WRITE DMA EXT

3Dh WRITE DMA FUA EXT

61h WRITE FPDMA QUEUED

3Fh WRITE LOG EXT

57h WRITE LOG DMA EXT

C5h WRITE MULTIPLE

39h WRITE MULTIPLE EXT

CEh WRITE MULTIPLE FUA EXT

30h WRITE SECTOR(S)

34h WRITE SECTOR(S) EXT

45h WRITE UNCORRECTABLE EXT

3Ch WRITE VERIFY

14 / 16

Enterprise Capacity HDD MG08 Series Product Manual

Rev. 03: July, 2021

SAS COMMAND TABLE (Part 1)

(MG08SCA16T / 14T)

(MG08SCP16T)

Op-Code Command Name

00h TEST UNIT READY

12h INQUIRY

25h READ CAPACITY (10)

9Eh/10h READ CAPACITY (16)

15h MODE SELECT (6)

55h

MODE SELECT (10)

1Ah MODE SENSE (6)

5Ah MODE SENSE (10)

01h

REZERO UNIT

1Bh START/STOP UNIT

16h RESERVE (6)

56h RESERVE (10)

17h RELEASE (6)

57h RELEASE (10)

03h REQUEST SENSE

4Ch LOG SELECT

4Dh

LOG SENSE

5Eh PERSISTENT RESERVE IN

5Fh PERSISTENT RESERVE OUT

A0h REPORT LUNS

A3h/05h REPORT IDENTIFYING INFORMATION

A3h/0Ch REPORT SUPPORTED OPERATION CODES

A3h/0Dh

REPORT SUPPORTED TASK MANAGEMENT FUNCTIONS

A4h/06h SET IDENTIFYING INFORMATION

A3h/0Fh REPORT TIMESTAMP

A4h/0Fh SET TIMESTAMP

15 / 16

Enterprise Capacity HDD MG08 Series Product Manual

Rev. 03: July, 2021

SAS COMMAND TABLE (Part 2)

(MG08SCA16T / 14T)

(MG08SCP16T)

Op-Code Command Name

08h

READ (6)

28h READ (10)

A8h READ (12)

88h

READ (16)

0Ah WRITE (6)

2Ah WRITE (10)

AAh

WRITE (12)

8Ah WRITE (16)

2Eh WRITE AND VERIFY (10)

AEh WRITE AND VERIFY (12)

8Eh WRITE AND VERIFY (16)

2Fh VERIFY (10)

AFh VERIFY (12)

8Fh VERIFY (16)

0Bh SEEK (6)

2Bh SEEK (10)

35h SYNCHRONIZE CACHE (10)

91h SYNCHRONIZE CACHE (16)

04h FORMAT UNIT

07h REASSIGN BLOCKS

37h READ DEFECT DATA (10)

B7h READ DEFECT DATA (12)

1Dh SEND DIAGNOSTIC

1Ch

RECEIVE DIAGNOSTIC RESULTS

3Bh WRITE BUFFER

3Ch READ BUFFER (10)

9Bh READ BUFFER (16)

3Eh READ LONG (10)

9Eh/11h READ LONG (16)

3Fh WRITE LONG (10)

9Fh/11h WRITE LONG (16)

41h

WRITE SAME (10)

93h

WRITE SAME (16)

48h SANITIZE (10)

16 / 16

Enterprise Capacity HDD MG08 Series Product Manual

Rev. 03: July, 2021

RESTRICTIONS ON PRODUCT USE

Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as “TOSHIBA”.

Hardware, software and systems described in this document are collectively referred to as “Product”.

• TOSHIBA reserves the right to make changes to the information in this document and related Product without notice.

• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's

written permission, reproduction is permissible only if reproduction is without alteration/omission.

• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are

responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and

systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury

or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or

incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant

TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product

and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the

application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or

applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b)

evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms,

sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and

applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.

• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE

EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY

CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT

("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without

limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, lifesaving and/or life supporting medical

equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control

combustions or explosions, safety devices, elevators and escalators, and devices related to power plant. IF YOU USE PRODUCT FOR

UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales

representative or contact us via our website.

• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any

intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,

INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING

WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND

(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,

OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,

for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products

(mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and

regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration

Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all

applicable export laws and regulations.

• Product may include products subject to foreign exchange and foreign trade control laws.

• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING

AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.

https://toshiba.semicon-storage.com/