Toshiba MG08SDA600E User Manual
Displayed below is the user manual for MG08SDA600E by Toshiba which is a product in the Internal Hard Drives category. This manual has pages.
Related Manuals
1 / 18
© 2020 Toshiba Electronic Devices & Storage Corporation
Enterprise Capacity HDD MG08-D Series Product Manual
Rev. 01: January
Item
MG08ADA800A/AY(4Kn)
MG08ADA800E/EY(512e)
MG08ADP800A(4Kn)
MG08ADP800E(512e)
MG08ADA600A/AY(4Kn)
MG08ADA600E/EY(512e)
MG08ADP600A(4Kn)
MG08ADP600E(512e)
MG08ADA400A/AY(4Kn)
MG08ADA400E/EY(512e)
MG08ADA400N/NY(512n)
MG08ADP400A(4Kn)
MG08ADP400E(512e)
MG08ADP400N(512n)
Interface
SATA-3.3
Formatted Capacity
8 TB
6 TB
4 TB
Performance
Interface Speed [4]
6.0 Gbit/s, 3.0 Gbit/s, 1.5 Gbit/s
Rotation Speed
7200 rpm
Buffer Size
256 MiB [5]
Maximum Sustained Data
Transfer Speed
(Typ.)
4Kn/512e: 248 MiB/s 4Kn/512e: 239 MiB/s
4Kn/512e: 243 MiB/s
512n : 222 MiB/s
Logical Data
Block Length
4Kn
4096 B
512e
Host:512 B, Disk:4096 B
512n
-
-
512 B
Supply
Voltage
Allowable Voltage 12 V [6] ± 10 % / 5 V [6] + 10% / -7% [7]
Power
Consumption
Write / Read 4KB Q1(Typ.)
9.29 W
8.50 W
7.76 W
Active Idle (Idle-A) (Typ.)
5.61 W
4.90 W
4.07 W
Acoustics [8]
Active Idle (Typ.)
31 dB
• Industry Standard 3.5-inch 26.1 mm Height Form Factor
• Up to 8 TB Capacity
• 7200 rpm Performance
• Choice of SATA 6 Gbit/s or Dual-Port SAS 12 Gbit/s
Interface
• 550 Total TB Transferred per Year Workload Rating[3]
• Choice of 512n or 512e (Advanced Format) Sector
Technology
• Sanitize Instant Erase (SIE) and Self-Encrypting Drive
(SED) Option Models Available
MG08-D SERIES
ENTERPRISE CAPACITY HDD
• Engineered for Mid-line / Nearline Business Critical
Workloads
• Tier 2 Business-Critical Servers and Storage
Systems
• Servers Supporting Workloads that Benefit from
Higher Capacity per Spindle
• Capacity-Optimized Data Center Storage Systems
• IT infrastructure designed around Enterprise
Capacity HDD performance
• Applications and hypervisors that require legacy 512
Native Sector Technology
Product image may represent a design model.
KEY FEATURES APPLICATIONS
The Enterprise Capacity 7200 rpm HDD models offer up to 8 TB[1], a choice of
interface (SATA -MG08ADA Series, and SAS - MG08SDA Series), as well as a choice
of 512 Native(512n) sector or 512 emulation(512e) sector technologies. All models
utilize a power-efficient mechanical design incorporating the latest advancements in
HDD technology. MG08-D Series models are designed to provide plug-and-play
robustness using the industry standard 3.5-inch[2] form factor. Model options
supporting Sanitize Instant Erase (SIE) and Self-Encrypting Drive (SED).
2 / 18
© 2020 Toshiba Electronic Devices & Storage Corporation
Enterprise Capacity HDD MG08-D Series Product Manual
Rev. 01: January
Item
MG08SDA800A/AY (4Kn)
MG08SDA800E/EY (512e)
MG08SDP800A(4Kn)
MG08SDP800E(512e)
MG08SDA600A/AY (4Kn)
MG08SDA600E/EY (512e)
MG08SDP600A(4Kn)
MG08SDP600E(512e)
MG08SDA400A/AY (4Kn)
MG08SDA400E/EY (512e)
MG08SDA400N/NY(512n)
MG08SDP400A(4Kn)
MG08SDP400E(512e)
MG08SDP400N(512n)
Interface
SAS-3
Formatted Capacity
8 TB
6 TB
4 TB
Performance
Interface Speed [4]
12.0 Gbit/s, 6.0 Gbit/s, 3.0 Gbit/s, 1.5 Gbit/s
Rotation Speed 7200 rpm
Buffer Size
256 MiB [5]
Maximum Sustained Data
Transfer Speed
(Typ.)
4Kn/512e: 248 MiB/s 4Kn/512e: 239 MiB/s
4Kn/512e: 243 MiB/s
512n : 222 MiB/s
Logical Data
Block Length
4Kn
4096 B / 4160 B / 4224 B
512e
Host: 512 B Disk:4096 B / Host 520 B Disk:4160 B
512n
-
-
512 B / 520B
Supply
Voltage
Allowable Voltage 12 V [6] ± 10 % / 5 V [6] + 10% / -7% [7]
Power
Consumption
Write / Read 4KB Q1(Typ.)
9.72 W
9.03 W
8.16 W
Active Idle (Idle-A)
(Typ.)
6.06 W
5.39 W
4.50 W
Acoustics [8]
Active Idle (Typ.)
31 dB
ENVIRONMENTAL LIMITS
RELIABILITY
[1] Definition of capacity: Toshiba defines a terabyte (TB) as 1 000 000 000 000 bytes. A computer operating system, however, reports storage capacity using powers
of 2 for the definition of 1TB = 240 = 1 099 511 627 776 bytes and therefore shows less storage capacity. Available storage capacity (including examples of various
media files) will vary based on file size, formatting, settings, software and operating system, such as Microsoft Operating System and/or pre-installed software
applications, or media content. Actual formatted capacity may vary.
[2] "3.5-inch" mean the form factor of HDDs. They do not indicate drive's physical size.
[3] Workload is defined as the amount of data written, read or verified by commands from host system.
[4] The maximum sustained data rate and interface speed may be restricted to the response speed of host system and by transmission characteristics.
1 Gbit/s = 1 000 000 000 bit/s. 1 MiB/s = 1 048 576 B/s
[5] A mebibyte (MiB) means 220, or 1 048 576 bytes.
[6] Input voltages are specified at the HDD connector side, during HDD ready state.
[7] Make sure the value is not less than DC -0.3 V DC (less than -0.6 V, 0.1 ms) when turning on or off the power.
Item
Specification
Ambient temperature
Operating
5 °C to 55 °C (No condensation)
Non-Operating
-40 °C to 70 °C (No condensation)
Enclosure surface temperature
Operating
5 °C to 60 °C (No condensation)
Relative Humidity
Operating
5 % to 90 % R.H. (No condensation)
Non-Operating
5 % to 95 % R.H. (No condensation)
Altitude
Operating
- 305 m to 3048 m
Non-Operating
- 305 m to 12 192 m
Shock [9]
Operating
686 m/s2 { 70 G } ( 2 ms duration )
Non-Operating
2940 m/s2 { 300 G } (2 ms duration) 4TB
2450 m/s2 { 250 G } (2 ms duration) 8/6TB
Vibration [9] Operating [10]
7.35 m/s2 { 0.75 G } ( 5 to 300 Hz )
2.45 m/s2 { 0.25 G } ( 300 to 500 Hz )
Non-Operating [11]
29.4 m/s2 { 3.0 G } ( 5 to 500 Hz )
Item
Specification
MTTF / AFR [12]
2 000 000 hours / 0.44 %
Non-recoverable Error Rate
10 error per 1016 bits read
Load / Unload
600 000 times
Availability
24 hours/day, 7 days/week
Rated Annual Workload
550 TB per year
3 / 18
© 2020 Toshiba Electronic Devices & Storage Corporation
Enterprise Capacity HDD MG08-D Series Product Manual
Rev. 01: January
[8] The measuring method is based on ISO 7779.
[9] Vibration applied to the HDD is measured at near the mounting screw hole on the frame as much as possible.
[10] At random seek write/read and default on retry setting with log sweep vibration.
[11] At power-off state after installation
[12] MTTF (Mean Time to Failure) of the HDDs during its life time is 2 000 000 hours and AFR (Annualized Failure Rate) is 0.44 %. (POH: 8760 hours per one year (24
hours per one day, 7 days per one week). Average HDA surface temperature:40°C or less, workloads: 550 TB/year, which is defined as the amount of data written,
read or verified by commands from host system). Continual or sustained operation at case HDA surface temperature above 40°C may degrade product reliability.
4 / 18
© 2020 Toshiba Electronic Devices & Storage Corporation
Enterprise Capacity HDD MG08-D Series Product Manual
Rev. 01: January
MODEL NUMBER
Model Number
Interface
Capacity
Sector Format
Optional Security
MG08ADA800A SATA-3.3 8 TB 4Kn
MG08ADA800E SATA-3.3 8 TB 512e[13]
MG08ADA800AY SATA-3.3 8 TB 4Kn SIE
MG08ADA800EY SATA-3.3 8 TB 512e[13] SIE
MG08ADP800A SATA-3.3 8 TB 4Kn SED
MG08ADP800E SATA-3.3 8 TB 512e[13] SED
MG08SDA800A SAS-3.0 8 TB 4Kn
MG08SDA800E SAS-3.0 8 TB 512e[13]
MG08SDA800AY
SAS-3.0
8 TB
4Kn
SIE
MG08SDA800EY
SAS-3.0
8 TB
512e
[13]
SIE
MG08SDP800A
SAS-3.0
8 TB
4Kn
SED
MG08SDP800E
SAS-3.0
8 TB
512e
[13]
SED
MG08ADA600A SATA-3.3 6 TB 4Kn
MG08ADA600E SATA-3.3 6 TB 512e[13]
MG08ADA600AY SATA-3.3 6 TB 4Kn SIE
MG08ADA600EY SATA-3.3 6 TB 512e[13] SIE
MG08ADP600A SATA-3.3 6 TB 4Kn SED
MG08ADP600E SATA-3.3 6 TB 512e[13] SED
MG08SDA600A SAS-3.0 6 TB 4Kn
MG08SDA600E SAS-3.0 6 TB 512e[13]
MG08SDA600AY SAS-3.0 6 TB 4Kn SIE
MG08SDA600EY SAS-3.0 6 TB 512e[13] SIE
MG08SDP600A SAS-3.0 6 TB 4Kn SED
MG08SDP600E SAS-3.0 6 TB 512e[13] SED
MG08ADA400A SATA-3.3 4 TB 4Kn
MG08ADA400E SATA-3.3 4 TB 512e[13]
MG08ADA400N SATA-3.3 4 TB 512n
MG08ADA400AY
SATA-3.3
4 TB
4Kn
SIE
MG08ADA400EY
SATA-3.3
4 TB
512e
[13]
SIE
MG08ADA400NY
SATA-3.3
4 TB
512n
SIE
MG08ADP400A
SATA-3.3
4 TB
4Kn
SED
MG08ADP400E
SATA-3.3
4 TB
512e
[13]
SED
MG08ADP400N SATA-3.3 4 TB 512n SED
MG08SDA400A SAS-3.0 4 TB 4Kn
MG08SDA400E SAS-3.0 4 TB 512e[13]
MG08SDA400N SAS-3.0 4 TB 512n
MG08SDA400AY SAS-3.0 4 TB 4Kn SIE
MG08SDA400EY SAS-3.0 4 TB 512e[13] SIE
MG08SDA400NY SAS-3.0 4 TB 512n SIE
MG08SDP400A SAS-3.0 4 TB 4Kn SED
MG08SDP400E SAS-3.0 4 TB 512e[13] SED
MG08SDP400N SAS-3.0 4 TB 512n SED
[13] Read–modify-write is supported.
5 / 18
© 2020 Toshiba Electronic Devices & Storage Corporation
Enterprise Capacity HDD MG08-D Series Product Manual
Rev. 01: January
MARKING
1) WEEE
2) Names and Contents of Hazardous Substances or Elements in Products
产品中有害物质的名称及含量
部件名称
有害物质
铅（Pb） 汞（Hg） 镉（Cd） 六价铬
（
Cr(VI)
）
多溴联苯
（
PBB
）
多溴二苯醚
（
PBDE
）
HDD(
硬盘驱动器
)
×
○
○
○
○
○
本表格依据
SJ/T 11364
的规定编制。
○
：表示该有害物质在该部件所有均质材料中的含量均在
GB/T 26572
规定的限量要求以下。
×
：表示该有害物质至少在该部件的某一均质材料中的含量超出
GB/T 26572
规定的限量要求。
中华人民共和国环保使用期限
SAFETY / EMI STANDARDS
Title
Region
UL (Underwriters Laboratories)
USA
CSA (Canadian Standard Association)
Canada
TÜV (Technischer Überwachungs Verein)
Germany
BSMI (Bureau of Standards, Metrology and Inspection)
Taiwan
KC (Note 1) (Korea Certification)
Korea
RCM (Regulatory Compliance Mark)
Australia and New Zealand
Following information is only for EU-member states:
The use of the symbol indicates that this product may not be
treated as household waste. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more
detailed information about recycling of this product, please contact your local city office,
your household waste disposal service or the shop where you purchased the product.
6 / 18
© 2020 Toshiba Electronic Devices & Storage Corporation
Enterprise Capacity HDD MG08-D Series Product Manual
Rev. 01: January
(Note) Marks of KC
Made in Japan
Made in Philippines
B 급 기기
(가정용 방송통신기자재)
이 기기는 가정용 (B 급) 전자파 적합 기기로서 주
로 가정에서 사용하는 것을 목적으로 하며, 모든
지역에서 사용할 수 있습니다.
MG08ADA800/600 A/E/AY/EY, MG08ADP800/600 A/E
R-R-T48-MG08ADA400N
TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION
2019-01
TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION
MG08SDA800/600 A/E/AY/EY, MG08SDP800/600 A/E
R-R-T48-MG08SDA400N
TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION
2019-01
TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION
MG08ADA400 A/E/N/AY/EY/NY, MG08ADP400 A/E/N
R-R-T48-MG08ADA400N
TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION
2019-01
TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION
MG08SDA400 A/E/N/AY/EY/NY, MG08SDP400 A/E/N
R-R-T48-MG08SDA400N
TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION
2019-01
TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION
MG08ADA800/600 A/E/AY/EY, MG08ADP800/600 A/E
R-R-T48-MG08ADA400N
TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION
2019-01
TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION
MG08SDA800/600 A/E/AY/EY, MG08SDP800/600 A/E/
R-R-T48-MG08SDA400N
TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION
2019-01
TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION
MG08ADA400 A/E/N/AY/EY/NY, MG08ADP400 A/E/N
R-R-T48-MG08ADA400N
TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION
2019-01
TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION
MG08SDA400 A/E/N/AY/EY/NY, MG08SDP400 A/E/N
R-R-T48-MG08SDA400N
TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION
2019-01
TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION
7 / 18
© 2020 Toshiba Electronic Devices & Storage Corporation
Enterprise Capacity HDD MG08-D Series Product Manual
Rev. 01: January
MECHANICAL SPECIFICATIONS
MG08ADAxxxA/E
MG08ADAxxxAY/EY
MG08ADPxxxA/E
(XXX = 800/600)
Item
Specification
Capacity 8TB 6TB 4TB
Width (Max)
101.85 mm
Height (Max)
26.1 mm
Length (Max)
147.0 mm
Weight (Max. (Typ))
720 g (700 g)
700 g (680 g)
693 g (675 g)
[Unit: mm]
8 / 18
© 2020 Toshiba Electronic Devices & Storage Corporation
Enterprise Capacity HDD MG08-D Series Product Manual
Rev. 01: January
MG08ADA400A/E/N
MG08ADA400AY/EY/NY
MG08ADP400A/E/N
[Unit: mm]
9 / 18
© 2020 Toshiba Electronic Devices & Storage Corporation
Enterprise Capacity HDD MG08-D Series Product Manual
Rev. 01: January
MG08SDAxxxA/E/N
MG08SDAxxxAY/EY/NY
MG08SDPxxxA/E/N
(XXX = 800/600)
[Unit: mm]
10 / 18
© 2020 Toshiba Electronic Devices & Storage Corporation
Enterprise Capacity HDD MG08-D Series Product Manual
Rev. 01: January
MG08SDA400A/E/N
MG08SDA400AY/EY/NY
MG08SDP400A/E/N
[Unit: mm]
11 / 18
© 2020 Toshiba Electronic Devices & Storage Corporation
Enterprise Capacity HDD MG08-D Series Product Manual
Rev. 01: January
INTERFACE CONNECTOR
SATA plug connector overview
MG08ADAxxxA/E/N
MG08ADAxxxAY/EY/NY
MG08ADPxxxA/E/N
SAS plug connector overview
MG08SDAxxxA/E/N
MG08SDAxxxAY/EY/NY
MG08SDPxxxA/E/N
12 / 18
© 2020 Toshiba Electronic Devices & Storage Corporation
Enterprise Capacity HDD MG08-D Series Product Manual
Rev. 01: January
INTERFACE CONNECTOR (SATA plug) SIGNAL ALLOCATION
(MG08ADAxxxA/E/N, MG08ADAxxxAY/EY/NY, MG08ADPxxxA/E/N)
Notice: This drive uses 5 V and 12 V power. 3.3 V power is not used.
HDA (Head Disk Assembly) and DC ground (ground pins on interface) are connected electrically each other.
Segment Pin No. Pin Definition
Signal Segment
S1 GND 2nd Mate
S2 A+ Differential Pair A from PHY (Device Rx+)
S3 A- Differential Pair A from PHY (Device Rx-)
S4 GND 2nd Mate
S5 B- Differential Pair B from PHY (Device Tx-)
S6 B+ Differential Pair B from PHY (Device Tx+)
S7 GND 2nd Mate
Power Segment
P1
－
(Unused)
P2
－
(Unused)
P3 PWDIS Enter/Exit Power Disable (Option)
P4
GND
1
st
Mate
P5
GND
2nd Mate
P6 GND
2nd Mate
P7 V5 5 V Power Pre-Charge 2nd Mate
P8
V5
5 V Power
P9
V5
5 V Power
P10 GND 2nd Mate
P11 Spin - Staggered Spin-up Mode Detect (Input)
ACT
- Activity LED Drive (Output)
P12
GND
1
st
Mate
P13 V12 12 V Power Pre-Charge 2nd Mate
P14 V12 12 V Power
P15 V12 12 V Power
13 / 18
© 2020 Toshiba Electronic Devices & Storage Corporation
Enterprise Capacity HDD MG08-D Series Product Manual
Rev. 01: January
INTERFACE CONNECTOR (SAS plug) SIGNAL ALLOCATION
(MG08SDAxxxA/E/N, MG08SDAxxxAY/EY/NY, MG08SDPxxxA/E/N)
(*1) Do not supply 3.3 V power if POWER DISABLE feature is used.
(*2) The terminal P3 is used as POWER DISABLE control signal in SAS-3. This terminal connects with the GROUND or is an OPENED thing on the host side when the
POWER DISABLE function is not used.
Segment Pin No. Pin Definition
Signal Segment
S1
GND
GND for SAS Primary Port
S2 RP+ SAS Primary Port Receive (positive) signal
S3 RP- SAS Primary Port Receive (negative) signal
S4 GND GND for SAS Primary Port
S5 TP- SAS Primary Port Transmit (negative) signal
S6 TP+ SAS Primary Port Transmit (positive) signal
S7 GND GND for SAS Primary Port
S8 GND GND for SAS Secondary Port
S9 RS+ SAS Secondary Port Receive (positive) signal
S10 RS- SAS Secondary Port Receive (negative) signal
S11 GND GND for SAS Secondary Port
S12 TS- SAS Secondary Port Transmit (negative) signal
S13 TS+ SAS Secondary Port Transmit (positive) signal
S14 GND GND for SAS Secondary Port
Power Segment
P1 (*1) Reserved Do not supply 3.3 V power if POWER DISABLE
Function is used.
P2 (*1)
Reserved
P3 (*2) POWER
DISABLE Power Disable Control input signal
P4 GND GROUND
P5
GND
GROUND
P6
GND
GROUND
P7 +5 V-Charge Pre-charge pin for +5 V
P8 +5 V +5 V power supply input
P9
+5 V
+5 V power supply input
P10
GND
GROUND
P11
READY LED
READY LED output
P12 GND GROUND
P13
+12 V-Charge
Pre-charge pin for +12 V
P14
+12 V
+12 V power supply input
P15
+12 V
+12 V power supply input
14 / 18
© 2020 Toshiba Electronic Devices & Storage Corporation
Enterprise Capacity HDD MG08-D Series Product Manual
Rev. 01: January
SATA COMMAND TABLE (Part 1)
(MG08ADAxxxA/E/N, MG08ADAxxxAY/EY/NY, MG08ADPxxxA/E/N)
Op-Code
Command Name
78h
ACCESSIBLE MAX ADDRESS CONFIGURATION
E5h/98h
CHECK POWER MODE
92h
DOWNLOAD MICROCODE
93h
DOWNLOAD MICROCODE DMA
90h
EXECUTE DIAGNOSTICS
E7h
FLUSH CACHE
EAh
FLUSH CACHE EXT
ECh
IDENTIFY DEVICE
E3h/97h
IDLE
E1h/95h
IDLE IMMEDIATE
91h
INITIALIZE DEVICE PARAMETERS
00h
NOP
E4h
READ BUFFER
C8h
READ DMA
25h
READ DMA EXT
60h
READ FPDMA QUEUED
2Fh
READ LOG EXT
47h
READ LOG DMA EXT
C4h
READ MULTIPLE
29h
READ MULTIPLE EXT
20h
READ SECTOR(S)
24h
READ SECTOR(S) EXT
40h
READ VERIFY SECTOR(S)
42h
READ VERIFY SECTOR(S) EXT
15 / 18
© 2020 Toshiba Electronic Devices & Storage Corporation
Enterprise Capacity HDD MG08-D Series Product Manual
Rev. 01: January
SATA COMMAND TABLE (Part 2)
(MG08ADAxxxA/E/N, MG08ADAxxxAY/EY/NY, MG08ADPxxxA/E/N)
Op-Code
Command Name
1xh
RECALIBRATE
0Bh
REQUEST SENSE DATA EXT
B4h
SANITIZE DEVICE
F1h
SECURITY SET PASSWORD
F2h
SECURITY UNLOCK
F3h
SECURITY ERASE PREPARE
F4h
SECURITY ERASE UNIT
F5h
SECURITY FREEZE LOCK
F6h
SECURITY DISABLE PASSWORD
70h – 76h,
79h – 7Fh SEEK
77h
SET DATE & TIME EXT
EFh
SET FEATURES
C6h
SET MULTIPLE MODE
E6h/99h
SLEEP
B0h
SMART Function Set
E2h/96h
STANDBY
E0h/94h
STANDBY IMMEDIATE
E8h
WRITE BUFFER
CAh
WRITE DMA
35h
WRITE DMA EXT
3Dh
WRITE DMA FUA EXT
61h
WRITE FPDMA QUEUED
3Fh
WRITE LOG EXT
57h
WRITE LOG DMA EXT
C5h
WRITE MULTIPLE
39h
WRITE MULTIPLE EXT
CEh
WRITE MULTIPLE FUA EXT
30h
WRITE SECTOR(S)
34h
WRITE SECTOR(S) EXT
45h
WRITE UNCORRECTABLE EXT
3Ch
WRITE VERIFY
16 / 18
© 2020 Toshiba Electronic Devices & Storage Corporation
Enterprise Capacity HDD MG08-D Series Product Manual
Rev. 01: January
SAS COMMAND TABLE (Part 1)
(MG08SDAxxxA/E/N, MG08SDAxxxAY/EY/NY, MG08SDPxxxA/E/N)
Op-Code
Command Name
00h
TEST UNIT READY
12h
INQUIRY
25h
READ CAPACITY (10)
9Eh/10h
READ CAPACITY (16)
15h
MODE SELECT (6)
55h
MODE SELECT (10)
1Ah
MODE SENSE (6)
5Ah
MODE SENSE (10)
01h
REZERO UNIT
1Bh
START/STOP UNIT
16h
RESERVE (6)
56h
RESERVE (10)
17h
RELEASE (6)
57h
RELEASE (10)
03h
REQUEST SENSE
4Ch
LOG SELECT
4Dh
LOG SENSE
5Eh
PERSISTENT RESERVE IN
5Fh
PERSISTENT RESERVE OUT
A0h
REPORT LUNS
A3h/05h
REPORT IDENTIFYING INFORMATION
A3h/0Ch
REPORT SUPPORTED OPERATION CODES
A3h/0Dh
REPORT SUPPORTED TASK MANAGEMENT FUNCTIONS
A4h/06h
SET IDENTIFYING INFORMATION
A3h/0Fh
REPORT TIMESTAMP
A4h/0Fh
SET TIMESTAMP
17 / 18
© 2020 Toshiba Electronic Devices & Storage Corporation
Enterprise Capacity HDD MG08-D Series Product Manual
Rev. 01: January
SAS COMMAND TABLE (Part 2)
(MG08SDAxxxA/E/N, MG08SDAxxxAY/EY/NY, MG08SDPxxxA/E/N)
Op-Code
Command Name
08h
READ (6)
28h
READ (10)
A8h
READ (12)
88h
READ (16)
0Ah
WRITE (6)
2Ah
WRITE (10)
AAh
WRITE (12)
8Ah
WRITE (16)
2Eh
WRITE AND VERIFY (10)
AEh
WRITE AND VERIFY (12)
8Eh
WRITE AND VERIFY (16)
2Fh
VERIFY (10)
AFh
VERIFY (12)
8Fh
VERIFY (16)
0Bh
SEEK (6)
2Bh
SEEK (10)
35h
SYNCHRONIZE CACHE (10)
91h
SYNCHRONIZE CACHE (16)
04h
FORMAT UNIT
07h
REASSIGN BLOCKS
37h
READ DEFECT DATA (10)
B7h
READ DEFECT DATA (12)
1Dh
SEND DIAGNOSTIC
1Ch
RECEIVE DIAGNOSTIC RESULTS
3Bh
WRITE BUFFER
3Ch
READ BUFFER (10)
9Bh
READ BUFFER (16)
3Eh
READ LONG (10)
9Eh/11h
READ LONG (16)
3Fh
WRITE LONG (10)
9Fh/11h
WRITE LONG (16)
41h
WRITE SAME (10)
93h
WRITE SAME (16)
48h
SANITIZE (10)
18 / 18
© 2020 Toshiba Electronic Devices & Storage Corporation
Enterprise Capacity HDD MG08-D Series Product Manual
Rev. 01: January
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as “TOSHIBA”.
Hardware, software and systems described in this document are collectively referred to as “Product”.
• TOSHIBA reserves the right to make changes to the information in this document and related Product without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's
written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury
or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or
incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant
TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product
and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the
application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or
applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b)
evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms,
sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and
applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY
CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, lifesaving and/or life supporting medical
equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control
combustions or explosions, safety devices, elevators and escalators, and devices related to power plant. IF YOU USE PRODUCT FOR
UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales
representative or contact us via our website.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any
intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,
INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND
(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,
OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products
(mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and
regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration
Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all
applicable export laws and regulations.
• Product may include products subject to foreign exchange and foreign trade control laws.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS
A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
https://toshiba.semicon-storage.com/