TP-Link Archer AX11000 User Manual
Displayed below is the user manual for Archer AX11000 by TP-Link which is a product in the Wireless Routers category. This manual has pages.
Related Manuals
If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL / Cable / Satellite modem,
connect the Ethernet cable to the router’s 2.5 Giga WAN port, and then follow steps 3 and 4 to complete the hardware
connection.
Connect the Hardware
Before You Start
Turn o your modem, if any, and
remove the backup battery if it
has one.
Congure the Router
Method ONE: Via TP-Link Tether App
1. Download the Tether app.
Scan for Tether Tether
or
Method TWO: Via a Web Browser
The default wireless network names (SSIDs) and password are printed
on the label at the bottom of the router.
1. Connect your device to the router wirelessly
or with an Ethernet cable.
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
SSID:TP-Link_XXXX_5G_Gaming
2. Launch a web browser, and enter
http://tplinkwifi.net or http://192.168.0.1 in
the address bar. Create a password to log in.
3. Follow the step-by-step instructions to
set up the internet connection and
register for the TP-Link Cloud service.
Note: If the login window does not appear, please refer to Q1 of Need
Help? in this guide.
http://tplinkwi.net
Hold the antennas from
the base and push them
fully into the slots.
Internet
3
1Connect the modem to the
router’s 2.5 Giga WAN port
with an Ethernet cable.
2Turn on the modem, and then wait
about 2 minutes for it to restart.
Connect the power adapter to
the router and turn on the router.
Verify the LED on the top is solid on (red
or white) before moving on.
4
2. Tap the button in the Tether app and
select Archer AX11000. Follow the steps
to complete the setup and connect to
the internet.
Choose your device type
Archer AX11000
Archer C5400X
Range Extender
Router
Password:
Conrm Password:
Let’s Get Started
Wireless Password/PIN: XXXXXXXX
©2019 TP-Link 7106508369 REV 1.0.1
For technical support, the user guide and more information, please
visit https://www.tp-link.com/support
Quick Installation Guide
Need Help?
Q1. What should I do if I can’t access the web
management page?
If the computer is set to a static IP, change its settings to
obtain an IP address automatically.
Verify that http://tplinkwifi.net is correctly entered in the web
browser. Alternatively, enter http://192.168.0.1 or
http://192.168.1.1 in the web browser.
Use another web browser and try again.
Reboot your router and try again.
Disable and enable the network adapter in use.
Q2. What should I do if I can’t access the internet?
Check if the internet is working normally by connecting a
computer directly to the modem via an Ethernet cable. If it is
not, contact your internet service provider.
Log in to the web management page of the router, and go to
Advanced > Network > Status to check whether the internet
IP address is valid or not. If it is, please run the Quick Setup
again; otherwise, check the hardware connection.
Reboot your router and try again.
For cable modem users, log in to the web management page
of the router and go to Advanced > Network > Internet > MAC
Clone. Select Clone Current Device MAC and click SAVE.
Then reboot both the modem and the router.
Q3. What should I do if the router can’t be found via
Bluetooth in Tether (how to reset the router)?
The router's Bluetooth will be enabled for 30 minutes following
a reset to factory defaults. There are two ways to reset the
router:
With the router powered on, use a pin to press and hold the
Reset button on the back of the router until the LED blinks.
Log in to the web management page of the router. Go to
Advanced > System > Backup & Restore, and click FACTORY
RESTORE. The router will reset and restart automatically.
LED & Button Explanation
Pulsing Orange
The system is starting up.
Solid Orange
The router is connected to the
internet, but the Wi-Fi is o.
Solid White
The router is working normally.
Solid Red
No internet connection.
Pulsing White
The rmware is being upgraded,
WPS connection is being established
or the router is being reset.
Wi-Fi Button
Press the Wi-Fi button to turn on or o
the wireless function of your router.
WPS Button
Press the WPS button, and
immediately press the WPS button on
your client to start the WPS process.
LED Button
Press the LED button to turn on or o
the LED of your router.
Next-Gen Tri-Band Gaming Router
AX11000