Table of Contents
- About This Guide
- Get to Know About Your Router
- Connect the Hardware
- Log into Your Router
- Set Up Internet Connection
- Guest Network
- NAT Forwarding
- USB Application
- Parental Controls
- Bandwidth Control
- Network Security
- Customize Your Network Settings
- 11. 1. Change the LAN Settings
- 11. 2. Configure to Support IPTV Service
- 11. 3. Specify DHCP Server Settings
- 11. 4. Set Up a Dynamic DNS Service Account
- 11. 5. Create Static Routes
- 11. 6. Specify Wireless Settings
- 11. 7. Use WPS for Wireless Connection
- 11. 8. Schedule Your Wireless Function
- 11. 9. Set up a VPN Connection
- Manage the Router
- 12. 1. Set Up System Time
- 12. 2. Test the Network Connectivity
- 12. 3. Upgrade the Firmware
- 12. 4. Backup and Restore Configuration Settings
- 12. 5. Change the Administrator Account
- 12. 6. Local Management
- 12. 7. Remote Management
- 12. 8. System Log
- 12. 9. SNMP Settings
- 12. 10. Monitor the Internet Traffic Statistics
- 12. 11. Control LEDs
- Appendix A: Specifications
- Appendix B: FAQ
TP-Link Archer C3200 User Manual
Displayed below is the user manual for Archer C3200 by TP-Link which is a product in the Wireless Routers category. This manual has pages.
Related Manuals
REV1.1.0 1910011577
Archer C3200
User Guide
AC3200 Wireless Tri-Band Gigabit Router
Contents
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Chapter 1. Get to Know About Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1. 1. Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
1. 2. Main Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. 3. Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. 3. 1. Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. 3. 2. Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Chapter 2. Connect the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2. 1. System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2. 2. Installation Environment Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
2. 3. Connect Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Chapter 3. Log into Your Router. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Chapter 4. Set Up Internet Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4. 1. Quick Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4. 2. Manually Congure Your Internet Connection Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4. 3. Setting Up an IPv6 Internet Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Chapter 5. Guest Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5. 1. Create Guest Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5. 2. Customize Guest Network Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Chapter 6. NAT Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
6. 1. Share Local Resources in the Internet by Virtual Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
6. 2. Open Ports Dynamically by Port Triggering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
6. 3. Make Applications Free from Port Restriction by DMZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
6. 4. Make Xbox Online Games Run Smoothly by UPnP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Chapter 7. USB Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
7. 1. Local Storage Sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
7. 1. 1. Access the USB disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
7. 1. 2. Customize Your Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
7. 2. Remote Access via FTP Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
7. 2. 1. Access the USB disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
7. 2. 2. Customize Your Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
7. 3. Media Sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
7. 3. 1. Access the USB disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
7. 3. 2. Customize Your Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
7. 4. Printer Sharing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Chapter 8. Parental Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Chapter 9. Bandwidth Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Chapter 10. Network Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
10. 1. Protect the Network from Cyber Attacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
10. 2. Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
10. 3. IP & MAC Binding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Chapter 11. Customize Your Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
11. 1. Change the LAN Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
11. 2. Congure to Support IPTV Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
11. 3. Specify DHCP Server Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
11. 4. Set Up a Dynamic DNS Service Account. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
11. 5. Create Static Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
11. 6. Specify Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
11. 7. Use WPS for Wireless Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
11. 7. 1. Set the Router’s PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
11. 7. 2. Use the WPS Wizard for Wi-Fi Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
11. 8. Schedule Your Wireless Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
11. 9. Set up a VPN Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Chapter 12. Manage the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
12. 1. Set Up System Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
12. 2. Test the Network Connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
12. 3. Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
12. 4. Backup and Restore Conguration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
12. 5. Change the Administrator Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
12. 6. Local Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
12. 7. Remote Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
12. 8. System Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
12. 9. SNMP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
12. 10. Monitor the Internet Trac Statistics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
12. 11. Control LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Appendix A: Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Appendix B: FAQ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
About This Guide 1
About This Guide
This guide provides details of each function and shows how to configure the router appropriate to your needs. In addition to
this guide, a Quick Installation Guide is also released with each TP-LINK router, you are suggested to configure your router for
quick Internet setup by following the published Quick Installation Guide before you get started with a further configuration.
Conventions
In this guide the following conventions are used:
Convention Description
router Stands for AC3200 Wireless Tri-Band Gigabit Router without any explanation.
parameters Parameters provided in the screenshots are just references for setting up the device, which may differ from the
actual situation. You can set the parameters according to your demand.
screenshots The demonstrated screenshots may look a little different from the actual web page of your device due to the
various firmware versions. Please just configure your product based on the actual web page.
Blue Italic Hyperlinks are in blue italic. You can click to redirect to a website or a specific section.
Blue Texts on the web page are in blue, including the menus, items, buttons, etc.
>
The menu structures to show the path to load the corresponding page. For example, Advanced > Wireless
> MAC Filtering means the MAC Filtering function page is under the Wireless menu that is located in the
Advanced tab.
Note: Ignoring this type of note might result in a malfunction or damage to the device.
Tips: Indicates important information that helps you make better use of your device.
symbols on the web page
• click to edit the corresponding entry.
• click to delete the corresponding entry.
• click to enable or disable the corresponding entry.
Chapter 1 . Get to Know About Your Router 2
Get to Know About Your
Router
This chapter introduces what the router can do and shows its main features and
appearance.
This chapter contains the following sections:
• Product Overview
• Main Features
• Panel Layout
1. 1. Product Overview
What This Product Does
TP-LINK’s AC3200 Wireless Tri-Band Gigabit Router integrates 4-port Switch, Firewall, NAT-router and Wireless AP. Powered by
3x3 MIMO technology, this router delivers exceptional range and speed, which can fully meet the need of Small Office/Home
Office (SOHO) networks and the users demanding higher networking performance. Your wireless connections are radio band
selectable to avoid interference in your area, and the four built-in Gigabit ports supply high-speed connection to your wired
devices.
More Wi-Fi for More Devices
The Archer C3200 uses Tri-Band technology to run three separate Wi-Fi channels at once, creating a network that can connect
to more devices without a trade-off in performance.
Smart Connect helps devices run even faster by assigning them to the best available channel to balance network demand.
Seamless Streaming and Gaming
With the fastest combined Wi-Fi speed of up to 3200Mbps, the Archer C3200 lets you simultaneously game online and stream
video in 4K Ultra HD across multiple devices without lag.
Maximum Coverage and Stability
Six high-performance external antennas greatly increase the Archer C3200’s range and signal stability. Beamforming technology
further improves the router’s coverage by helping it locate wireless devices to form stronger, more reliable connections.
Run All Your Devices At Once
A powerful 1GHz dual-core CPU and three co-processors easily handle the demand made on the Archer C3200’s network
when multiple users are browsing, streaming, and gaming all at the same time.
Lightning-Fast Wired Performance
External hard drives can connect directly to the Archer C3200 via its USB 3.0 and 2.0 ports, making it easy to share files, photos,
music, and video across your network.
The Archer C3200 is also equipped with four Gigabit Ethernet ports that enable blazing wired speeds 10x greater than Fast
Ethernet, helping connected gaming consoles, PCs, and smart TVs achieve their best performance.
Easy Setup and Use
Set up the Archer C3200 in minutes thanks to its intuitive web interface and the powerful Tether app. Tether also lets you
manage its network settings from any Android or iOS device, including parental controls and media sharing.
1
Chapter 1 . Get to Know About Your Router 3
1. 2. Main Features
• Complies with IEEE 802.11ac.
• One 10/100/1000M Auto-Negotiation RJ45 Internet port, four 10/100/1000M Auto-Negotiation RJ45 Ethernet ports,
supporting Auto MDI/MDIX.
• Provides a USB 3.0 port and a USB 2.0 port supporting file sharing and print server.
• Provides WPA/WPA2, WPA-PSK/WPA2-PSK authentication, TKIP/AES encryption security.
• Shares data and Internet access for users, supporting Dynamic IP/Static IP/PPPoE/PPTP/ L2TP Internet access.
• Supports simultaneous 2.4GHz and 5GHz connections for 3200Mbps of total available bandwidth.
• Supports Virtual Server, Special Application and DMZ host.
• Supports UPnP, Dynamic DNS, Static Routing.
• Provides Automatic-connection and Scheduled Connection on certain time to the Internet.
• Built-in NAT and DHCP server supporting static IP address distributing.
• Supports Parental Controls and Access Control.
• Connects Internet on demand and disconnects from the Internet when idle for PPPoE.
• Provides WEP encryption security and wireless LAN ACL (Access Control List).
• Supports Flow Statistics.
• Supports IPv6.
• Supports firmware upgrade and Web management.
1. 3. Panel Layout
1. 3. 1. Front Panel
The router’s LEDs are located on the front panel (View from top to bottom). You can check the router’s working status by
following the LED Explanation table.
LED Explanation:
Name Status Indication
Power
Flash System initializing or firmware upgrading is in process. Do not disconnect or power off the
router.
On System initialization complete.
Off Power is off. Please ensure that the power adapter is connected correctly.
Chapter 1 . Get to Know About Your Router 4
Name Status Indication
(2.4GHz)
On 2.4GHz wireless is working properly.
Off 2.4GHz wireless is disabled.
(5GHz-1)
On 5GHz-1 wireless is working properly.
Off 5GHz-1 wireless is disabled.
(5GHz-2)
On 5GHz-2 wireless is working properly.
Off 5GHz-2 wireless is disabled.
(Ethernet)
On There is device(s) connected to the Ethernet (1/2/3/4) port(s).
Off No any device is connected to the Ethernet (1/2/3/4) port.
(Internet)
Blue The Internet port is connected, and the Internet is accessible.
Orange The Internet port is connected, but the Internet is inaccessible.
Off The Internet port isn’t connected, and the Internet is inaccessible.
(WPS)
Flash WPS button on the router is pressed, and the router is trying to connect a wireless device
to its network via WPS.
On The connection via WPS is successful.
Off The connection via WPS fails.
(USB 1/USB 2)
Flash The router is identifying the device connected to the USB 2.0 port/USB 3.0 port.
On The device is identified successfully.
Off No device is connected to the USB 2.0 port/USB 3.0 port.
Note:
After a device is successfully added to the network by WPS function, the WPS LED will keep on for about 5 minutes and then turn off.
The following buttons are also located on the front panel (View from left to right). Refer to the following for detailed instructions.
Button Description
(Wi-Fi) Pressing this button for 2 seconds enables or disables the Wi-Fi function.
(WPS)
Pressing this button for less than 5 seconds enables the WPS function. If your client devices, such as wireless
adapters, support Wi-Fi Protected Setup, then you can press this button to quickly establish a connection
between the router and client devices and automatically configure wireless security for your wireless network.
(LED On/Off) Pressing this button for 1 second turns all LEDs on or off.
Chapter 1 . Get to Know About Your Router 5
1. 3. 2. Rear Panel
The following parts are located on the rear panel (View from left to right). Refer to the following for detailed instructions.
Item Description
Reset button Pressing this button for about 7 seconds enables the Reset function.
USB 2.0 port The USB 2.0 port connects to a USB 2.0 storage device or a USB 2.0 printer.
Internet port This port is where you will connect the DSL/cable Modem, or Ethernet.
Ethernet (1, 2, 3, 4) ports These ports (1, 2, 3, 4) connect the router to the local PCs.
USB 3.0 port The USB 3.0 port connects to a USB 3.0 storage device or a USB 3.0 printer.
Power On/Off button This button powers on or off the router.
Power port This port is where you will connect the power socket via the provided power adapter.
Chapter 2 . Connect the Hardware 6
Connect the Hardware
This chapter contains the following sections:
• System Requirements
• Installation Environment Requirements
• Connect Your Router
2. 1. System Requirements
• Broadband Internet Access Service (DSL/Cable/Ethernet)
• One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the router is connected directly to the Ethernet)
• PCs with a working Ethernet adapter and an Ethernet cable with RJ45 connectors
• TCP/IP protocol on each PC
• Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari
2. 2. Installation Environment Requirements
• Place the router in a well-ventilated place far from any heater or heating vent
• Avoid direct irradiation of any strong light (such as sunlight)
• Keep at least 2 inches (5 cm) of clear space around the router
• Operating Temperature: 0℃~40℃ (32℉~104℉)
• Operating Humidity: 10%~90%RH, Non-condensing
2. 3. Connect Your Router
Follow the steps below to connect your router.
1. Connect your router as shown in the figure below. The electrical outlet shall be installed near the device and shall be
easily accessible.
Note:
If your Internet connection is through an Ethernet cable from the wall instead of through a DSL / Cable / Satellite modem, connect the
Ethernet cable directly to the router’s Internet port.
2
Chapter 2 . Connect the Hardware 7
Turn on the modem, and
then wait about 2 minutes
for it to restart.
Connect the modem to the
Internet port on your router with
an Ethernet cable.
Router
Modem
Power adapter
Turn off the modem,
and remove the backup
battery if it has one.
2
Place the router horizontally and extend the
antennas to the maximum angle.
1
Note: For best performance, horizontal installation is recommended.
Antenna direction and position can affect performance in vertical
installation situations.
4
3
Turn on the router.
5
Internet
Verify that the following LEDs are on and stable before continuing with
the configuration.
6
On
Internet
5GHz-1
On
5GHz-2
On
Power
On
2.4GHz
On
Note:
1. If all the LEDs are off, press the LED On/Off button for about 1 second, then check the LEDs again.
2. If the 2.4GHz, 5GHz-1, and 5GHz-2 LEDs are off, press the Wi-Fi On/Off button for about 2 seconds, then
check the LEDs again in a few seconds.
2. Connect your computer to the router.
• Method 1: Wired
Connect your computer’s Ethernet port to the router’s Ethernet port via an Ethernet cable.
• Method 2: Wirelessly
Connect your computer to the router wirelessly by using the default SSID (Wireless Network Name) and Wireless Password
printed on the product label of the router.
• Method 3: Use the WPS button
Wireless devices that support WPS, including Android phones, tablets, most USB network cards, can be connected to your
router through this method.(WPS is not supported by IOS devices.)
Note:
The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be disabled if your
wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the appropriate encryption before
configuring the WPS.
1. Tab the WPS icon on the device’s screen.
2. Immediately press the WPS button on your router.
3. The WPS LED flashes for about two minutes during the WPS process.
4. When the WPS LED is on, the client device has successfully connected to the router.
Chapter 3 . Log into Your Router 8
Log into Your Router
With a Web-based utility, it is easy to congure and manage the router. The
Web-based utility can be used on any Windows, Macintosh or UNIX OS with a
Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.
Follow the steps below to log into your router.
1. Set up the TCP/IP Protocol in Obtain an IP address automatically mode on your computer.
2. Launch a web browser and type in http://tplinkwifi.net or http://192.168.0.1. Use admin for both username and password,
and click Login.
Note:
If the login window does not appear, please refer to Q3. I cannot login to the router’s web management page, what can I do?
3. Create a new username and password for subsequent login.
3
Chapter 4 . Set Up Internet Connection 9
Set Up Internet Connection
This chapter introduces how to connect your router to the Internet. The router
is equipped with a web-based Quick Setup wizard. It has many ISP information
built in, automates many of the steps and verifies that those steps have been
successfully completed. Furthermore, you can also set up an IPv6 connection if
your ISP provides IPv6 service.
This chapter contains the following sections:
• Quick Setup
• Manually Configure Your Internet Connection Settings
• Setting Up an IPv6 Internet Connection
4. 1. Quick Setup
The Quick Setup Wizard will guide you through the process to set up your router to access the Internet.
Tips:
If you need the IPv6 Internet connection, please refer to the section of Setting Up an IPv6 Internet Connection.
Follow the steps below to set up your router to access the Internet.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Quick Setup on the top of the page.
3. Select your time zone, and click Next.
4. Click Auto Detect and the router will detect your connection type automatically.
Note:
You can also choose the connection type manually. If you use DSL line and you are only provided an account name and a password by your
ISP, choose PPPoE. If you use cable TV or fiber cable, choose Dynamic IP. If you are provided more information such as IP address, Subnet
Mask and Default Gateway, choose Static IP. Contact your ISP if you are not sure about the Internet connection information.
4
Chapter 4 . Set Up Internet Connection 10
5. In this case, the router automatically detects Dynamic IP as the connection type. Click Next.
6. Follow the instructions on the page to decide whether to clone MAC Address. Click Next.
7. Configure your wireless settings and click Next.
Chapter 4 . Set Up Internet Connection 11
Note:
1. You may customize your 2.4GHz/5GHz-1/5GHz-2 SSID and password. Once done, the wireless connection will disconnect automatically,
and you must then use the new SSID/password to regain access to the Internet.
2. Tick Hide SSID if you want to hide this wireless network name.
8. Confirm the information and click Save.
9. Click Test Internet Connection. If you successfully connect to the Internet, the screen will display as follows.
Chapter 4 . Set Up Internet Connection 12
10. Now your computer and Wi-Fi device can connect to the Internet!
tips:
You can connect your computer to the router’s LAN port using an Ethernet cable to join the local area network. You can also find and select
the wireless network name on your Wi-Fi device to join the Wi-Fi network.
4. 2. Manually Configure Your Internet Connection Settings
In this part, you can check your current Internet connection settings. You can also modify the settings according to the service
information provided by your ISP.
Follow the steps below to check or modify your Internet connection settings.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Basic > Internet on the left to enter the setting page.
3. Select your Internet connection type from the drop-down list.
Note:
If you are unsure what your connection type is, click Auto Detect. Since different connection types need different cables and connection
information, you can also refer to the demonstrations in Step 3 to judge your connection type.
Chapter 4 . Set Up Internet Connection 13
4. Follow the instructions on the page to continue the configuration. Parameters on the figures are just used for
demonstration.
1 ) If you choose Dynamic IP, you need to select whether to clone the MAC address. Dynamic IP users are usually
equipped with cable TV or fiber cable.
2 ) If you choose Static IP, enter the information provided by your ISP in the corresponding fields.
3 ) If you choose PPPoE, enter the username and password provided by your ISP. PPPoE users usually have DSL cable.
Chapter 4 . Set Up Internet Connection 14
4 ) If you choose L2TP, enter the username and password and choose the Secondary Connection provided by your ISP.
Different parameters are needed according to the Secondary Connection.
5 ) If you choose PPTP, enter the username, password and choose the Secondary Connection provided by your ISP.
Different parameters are needed according to the Secondary Connection.
Chapter 4 . Set Up Internet Connection 15
5. Click Save to make the settings take effect. To check your Internet connection, click Network Map on the left of the page.
Note:
It may take 1-2 minutes to make the settings valid.
6. After the connection succeeds, the screen will display as follows. Here we take PPPoE as an example.
Tips:
1. If you use Dynamic IP and PPPoE and you are provided any other parameters that are not required on the page, please go to Advanced
> Network > Internet to complete the configuration.
2. If you still cannot connect to the Internet, refer to Appendix B: FAQ for further instructions.
4. 3. Setting Up an IPv6 Internet Connection
In this part, you can set up an IPv6 Internet connection if your ISP supports it and has provided related parameters.
Chapter 4 . Set Up Internet Connection 16
1. Visit http://tplinkwifi.net, then log in with the username and password you set for the router.
2. Go to Advanced > IPv6 to log into the configuration page.
3. Enable IPv6, and select the Internet connection type provided by your ISP.
Tips:
If you do not know what your Internet connection type is, contact your ISP or judge according to the information provided by your ISP.
4. Fill in information provided by your ISP.
1 ) Static IP: Fill in blanks. Click Advanced to have more configuration if your ISP requires. Click Save.
Chapter 4 . Set Up Internet Connection 17
2 ) Dynamic IP: Select the Addressing Type. Click Advanced to have more configuration if your ISP requires. Click Save.
3 ) PPPoE: Fill in the Username and Password, and select the Addressing Type. Click Advanced to have more
configuration if your ISP requires. Click Save.
Chapter 4 . Set Up Internet Connection 18
4 ) 6to4 Tunnel: An IPv4 Internet connection type is a prerequisite for this connection type. (Go to Manually Configure
Your Internet Connection Settings for more information.) Click Save.
5. Configure the IPv6 LAN settings. Leave the settings as default, and click Save.
6. Click Status to check whether you succeed or not. The following figure is an example of a successful PPPoE configuration.
Tips:
Visit Appendix B: FAQ if there is no Internet connection.
Chapter 5 . Guest Network 19
Guest Network
This function allows you to provide Wi-Fi access for guests without disclosing
your main network. When you have guests in your house, apartment, or
workplace, you can create a guest network for them. In addition, you can
customize guest network options to ensure network security and privacy.
This chapter contains the following sections:
• Create Guest Network
• Customize Guest Network Options
5. 1. Create Guest Network
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > Guest Network.
3. Create a 2.4GHz or 5GHz guest network according to your needs.
1 ) Click 2.4GHz, 5GHz-1, or 5GHz-2 and select Enable.
2 ) Set an easy-to-identify SSID. Don‘t select Hide SSID unless you want your guests and other people to manually input
this SSID for Wi-Fi access.
3 ) Set Security to WPA/WPA2 Personal, keep the default Version and Encryption values, and set an easy-to-remember
password.
4. Click Save. Now your guests can access your guest network using the SSID and password you set!
Tips:
To view guest network information, go to Advanced > Status and find the Guest Network section.
5. 2. Customize Guest Network Options
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > Guest Network.
3. Customize guest network options according to your needs.
5
Chapter 5 . Guest Network 20
• Allow guests to see each other
Select this checkbox if you want to allow the clients in your guest network to access each other.
• Allow guests to access my local network
Select this checkbox if you want to allow the clients in your guest network to access your local network, not just Internet
access.
4. Click Save. Now users in your guest network can enjoy only the network authorities you assigned!
Tips:
To view guest network information, go to Advanced > Status and find the Guest Network section.
Chapter 6 . NAT Forwarding 21
NAT Forwarding
Router’s NAT (Network Address Translation) feature makes the devices in the
LAN use the same public IP address to communicate in the Internet, which
protect the local network by hiding IP addresses of the devices. However, it also
brings about the problem that external host cannot initiatively communicate
with the specified device in the local network.
With forwarding feature the router can penetrate the isolation of NAT and allows
the external hosts in the Internet to initiatively communicate with the devices in
the local network, thus to realize some special functions.
TP-LINK router includes four forwarding rules. If two or more rules are set, the
priority of implementation from high to low is Virtual Servers, Port Triggering,
UPNP and DMZ.
This chapter contains the following sections:
• Share Local Resources in the Internet by Virtual Server
• Open Ports Dynamically by Port Triggering
• Make Applications Free from Port Restriction by DMZ
• Make Xbox Online Games Run Smoothly by UPnP
6. 1. Share Local Resources in the Internet by Virtual Server
When you build up a server in the local network and want to share it on the Internet, Virtual Server can realize the service
and provide it to the Internet users. At the same time virtual server can keep the local network safe as other services are still
invisible from the Internet.
Virtual server can be used for setting up public services in your local network, such as HTTP, FTP, DNS, POP3/SMTP and Telnet.
Different service uses different service port. Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and
port 110 in POP3 service. Please verify the service port number before the configuration.
share my personal website I’ve built in local network with my friends through the Internet.
For example,The personal website has been built in my home PC (192.168.0.100). I hope that my
friends in the Internet can visit my website in some way. The PC is connected to the router with the
WAN IP address 218.18.232.154.
Router
WAN: 218.18.232.154
LAN
Home
Personal Website
1. Assign a static IP address to your PC, for example 192.168.0.100.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
3. Go to Advanced > NAT Forwarding > Virtual Servers, click Add.
4. Click View Existing Application, and select HTTP. The external port, internal port and protocol
will be automatically filled with contents. Enter the PC’s IP address 192.168.0.100 in the Internal
IP field.
5. Click OK to save the settings.
I want to:
How can I
do that?
6
Chapter 6 . NAT Forwarding 22
Tips:
1. It is recommended to keep the default settings of Internal Port and Protocol if you are not clear about which
port and protocol to use.
2. If the service you want to use is not in the Service Type, you can enter the corresponding parameters
manually. You should verify the port number that the service need.
3. You can add multiple virtual server rules if you want to provide several services in a router. Please note that
the External Port should not be overlapped.
Users in the Internet can enter http://WAN IP (in this example: http:// 218.18.232.154) to visit your
personal website.
Tips:
1. WAN IP should be a public IP address. For the WAN IP is assigned dynamically by ISP, it is recommended to
apply and register a domain name for the WAN refer to Set Up a Dynamic DNS Service Account. Then you
can use http://domain name to visit the website.
2. If you have changed the default External Port, you should use http://WAN IP: External Port or http://domain
name: External Port to visit the website.
6. 2. Open Ports Dynamically by Port Triggering
Port triggering can specify a triggering port and its corresponding external ports. When a host in the local network initiates
a connection to the triggering port, all the external ports will be opened for subsequent connections. The router can record
the IP address of the host. When the data from the Internet return to the external ports, the router can forward them to the
corresponding host. Port triggering is mainly applied to online games, VoIPs and video players. Common applications include
MSN Gaming Zone, Dialpad and Quick Time 4 players, etc.
Follow the steps below to configure the port triggering rules:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > NAT Forwarding > Port Triggering and click Add.
3. Click View Existing Applications, and select the desired application. The external port, internal port and protocol will be
automatically filled with contents. The following picture takes application MSN Gaming Zone as an example.
4. Click OK to save the settings.
Done!
Chapter 6 . NAT Forwarding 23
Tips:
1. You can add multiple port triggering rules according to your network need.
2. If the application you need is not listed in the Existing Applications list, please enter the parameters manually. You should verify the
external ports the application uses first and enter them into External Port field according to the format the page displays.
6. 3. Make Applications Free from Port Restriction by DMZ
When a PC is set to be a DMZ (Demilitarized Zone) host in the local network, it is totally exposed to the Internet, which can
realize the unlimited bidirectional communication between internal hosts and external hosts. The DMZ host becomes a virtual
server with all ports opened. When you are not clear about which ports to open in some special applications, such as IP
camera and database software, you can set the PC to be a DMZ host.
Note:
DMZ is more applicable in the situation that users are not clear about which ports to open. When it is enabled, the DMZ host is totally
exposed to the Internet, which may bring some potential safety hazard. If DMZ is not in use, please disable it in time.
make the home PC join the Internet online game without port restriction.
For example, Due to some port restriction, when playing the online games, you can login normally
but cannot join a team with other players. To solve this problem, set your PC as a DMZ with all ports
opened.
1. Assign a static IP address to your PC, for example 192.168.0.100.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
3. Go to Advanced > NAT Forwarding > DMZ and select the checkbox to enable DMZ.
4. Enter the IP address 192.168.0.100 in the DMZ Host IP Address filed.
I want to:
How can I
do that?
Chapter 6 . NAT Forwarding 24
5. Click Save to save the settings.
The configuration is completed. You’ve set your PC to a DMZ host and now you can make a team to
game with other players.
6. 4. Make Xbox Online Games Run Smoothly by UPnP
UPnP (Universal Plug and Play) protocol allows the applications or host devices to automatically find the front-end NAT device
and send request to it to open the corresponding ports. With UPnP enabled, the applications or host devices in the both sides
of NAT device can freely communicate with each other realizing the seamless connection of the network. You may need to
enable the UPnP if you want to use applications for multiplayer gaming, peer-to-peer connections, real-time communication
(such as VoIP or telephone conference) or remote assistance, etc.
Tips:
1. UPnP is enabled by default in this router.
2. Only the application supporting UPnP protocol can use this feature.
3. UPnP feature needs the support of operating system (e.g. Windows Vista/ Windows 7/ Windows 8, etc. Some of operating system
need to install the UPnP components).
For example, When you connect your Xbox to the router which has connected to the Internet to play online games, UPnP
will send request to the router to open the corresponding ports allowing the following data penetrating the NAT to transmit.
Therefore, you can play Xbox online games without a hitch.
RouterXbox
LAN WAN
If necessary, you can follow the steps to change the status of UPnP.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router;
2. Go to Advanced > NAT Forwarding > UPnP and toggle on or off according to your needs.
Done!
Chapter 7 . USB Application 25
USB Application
This chapter describes how to share and access USB devices connected to the
router among different clients.
The router only supports USB external flash drives, hard drives and USB printers,
and does not support USB 3G/4G modems.
This chapter contains the following sections:
• Local Storage Sharing
• Remote Access via FTP Server
• Media Sharing
• Printer Sharing
7. 1. Local Storage Sharing
Share your USB storage devices with different users on the network.
7. 1. 1. Access the USB disk
1. Connect Your USB Disk
Insert your USB storage device into the router’s USB port directly or using a USB cable. Wait several seconds until the USB
LED becomes solid on.
Tips:
• If you use USB hubs, make sure no more than four devices are connected to the router.
• If the USB storage device requires using bundled external power, make sure the external power has been connected.
• If you use a USB hard drive, make sure its file system is FAT32 or NTFS.
• Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to Advanced > USB
Settings > Device Settings and click Safety Remove.
2. Access Your USB Disk
By default all the network clients can access all folders on your USB disk. Refer to the following table for access instructions.
You can also customize your sharing content and set a sharing account referring to Customize Your Settings.
Windows
computer
1. Press Windows ( )+ R on the keyboard (or select Start > Run).
2. Type the server address \\tplinkwifi.net or ftp://tplinkwifi.net in the dialog box.
3. Click OK.s
Mac
1. Select Go > Connect to Server.
2. Type the server address smb://tplinkwifi.net or ftp://tplinkwifi.net.
3. Click Connect.
pad Use a third-party app for network files management.
Tips:
You can also access all folders by using your Network/Media Server Name. Refer to To Customize the Address of the USB
Disk to learn more.
7. 1. 2. Customize Your Settings
To Only Share Specific Content
By default, Share All is enabled so all content on the USB disk is shared. If you want to only share specific folders, follow the
steps below:
7
Chapter 7 . USB Application 26
1. Visit http://tplinkwifi.net, then log in with the username and password you set for the router.
2. Go to Basic or Advanced > USB Settings > Sharing Access. Focus on the Folder Sharing section. Click the button to
disable Share All, then click Add to add a new sharing folder.
3. Select the Volume Name and Folder Path, then enter a Folder Name as you like.
4. Decide the way you share the folder:
• Enable Authentication: Select to enable authentication for this folder sharing, and you will be required to use a username and
password to access the USB disk. Refer to To Set up Authentication for Data Security to learn more.
• Enable Write Access: If you select this check box, network clients can modify this folder.
• Enable Media Sharing: Select to enable media sharing for this folder, and you can view photos, play music and watch movies
stored on the USB disk directly from DLNA-supported devices. Click Media Sharing to learn more.
5. Click OK.
Tips:
The router can share 32 volumes at most. You can click on the page to detach the corresponding volume you do not need to share.
To Set up Authentication for Data Security
If you enable Authentication, network clients will be required to enter the username and password you set when accessing
the USB disk.
1. Visit http://tplinkwifi.net, then log in with the username and password you set for the router.
2. Go to Advanced > USB Settings > Sharing Access. Focus on the Sharing Account section.
3. Choose to use the default account (admin) or use a new account, and click Save.
Chapter 7 . USB Application 27
4. Enable Authentication to apply the account you just set.
• If you leave Share All enabled, click the button to enable Authentication for all folders.
• If Share All is disabled, enable Authentication for specific folders.
To Customize the Address of the USB Disk
You can customize the server name and use the name to access your USB disk.
1. Visit http://tplinkwifi.net, then log in with the username and password you set for the router.
2. Go to Advanced > USB Settings > Sharing Access. Focus on the Sharing Settings section
3. Make sure Network Neighborhood is ticked, and enter a Network/Media Server Name as you like, such as My-Share, then
click Save.
4. Now you can access the USB disk with \\My-Share (smb://My-Share for Mac).
7. 2. Remote Access via FTP Server
You can access your USB disk outside the local area network.
For example:
• Share photos and other large files with your friends without logging in to (and paying for) a photo-sharing site or email system.
• Get a safe backup for the materials for a presentation.
• Remove the files on your camera’s memory card from time to time during the journey.
Note:
If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), you cannot use this feature because private addresses are not
routed on the Internet.
7. 2. 1. Access the USB disk
1. Connect Your USB Disk
Insert your USB storage device into the router’s USB port directly or using a USB cable. Wait several seconds until the USB
LED becomes solid on.
Tips:
• If you use USB hubs, make sure no more than four devices are connected to the router.
• If the USB storage device requires using bundled external power, make sure the external power has been connected.
• If you use a USB hard drive, make sure its file system is FAT32 or NTFS.
Chapter 7 . USB Application 28
• Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to Advanced > USB
Settings > Device Settings and click Safety Remove.
2. Enable Authentication for Data Security
It is strongly recommended that you set and apply a sharing account for data security.
1 ) Visit http://tplinkwifi.net, then log in with the username and password you set for the router.
2 ) Go to Advanced > USB Settings > Sharing Access.
3 ) Choose to use the default account (admin) or use a new account, and click Save.
4 ) Enable Authentication to apply the sharing account.
• If you leave Share All enabled, click the button to enable Authentication for all folders.
• If Share All is disabled, enable Authentication for specific folders.
3. Enable the FTP (via Internet)
Select the check box to enable FTP (via Internet), then click Save.
4. Access Your USB Disk via Internet
Now different clients with Internet connection can access the USB disk:
computer
• To download, open a web browser and type the server address ftp://<WAN IP address of the
router>:<port number> (such as ftp://59.40.2.243:21), or if you set up a domain name for your router
you can type the server address ftp://<domain name of the router>:<port number> (such as ftp://
MyDomainName:21) in the address bar, then press Enter on the keyboard.
• To upload, use a third-party app for network files management.
Chapter 7 . USB Application 29
pad • Use a third-party app for network files management.
Tips:
Go to Set Up a Dynamic DNS Service Account to learn how to set up a domain name for your router.
7. 2. 2. Customize Your Settings
To Only Share Specific Content
By default, Share All is enabled so all content on the USB disk is shared. If you want to only share specific folders, follow the
steps below:
1. Visit http://tplinkwifi.net, then log in with the username and password you set for the router.
2. Go to Basic or Advanced > USB Settings > Sharing Access. Focus on the section of Folder Sharing. Click the button to
disable Share All, then click Add to add a new sharing folder.
3. Select the Volume Name and Folder Path, then specify the Folder Name as you like.
4. Select Enable Authentication. If you allow network clients to modify this folder, select Enable Write Access.
5. Click OK.
Tips:
The router can share 32 volumes at most. You can click on the page to detach the corresponding volume you do not need to share.
7. 3. Media Sharing
The feature of Media Sharing allows you to view photos, play music and watch movies stored on the USB disk directly from
DLNA-supported devices, such as your computer, pad and PS2/3.
7. 3. 1. Access the USB disk
1. Connect Your USB Disk
Chapter 7 . USB Application 30
Insert your USB storage device into the router’s USB port directly or using a USB cable. Wait several seconds until the USB
LED becomes solid on.
Tips:
• If you use USB hubs, make sure no more than four devices are connected to the router.
• If the USB storage device requires using bundled external power, make sure the external power has been connected.
• If you use a USB hard drive, make sure its file system is FAT32 or NTFS.
• Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to Advanced > USB
Settings > Device Settings and click Safety Remove.
2. Play the Media on Your USB Disk
Now the DLNA-supported devices (such as your computer and pad) connected to the router can detect and play the
media files on the USB disks.
Windows
computer
1. Open the Windows Media Player.
2. Click the media server name (such as Genie Media Severs) under the list of Other Libraries, then
you can directly view photos, play music and watch movies that you share on the USB disks.
pad • Use a third-party DLNA-supported player.
7. 3. 2. Customize Your Settings
To Only Share Specific Content
By default, Share All is enabled so all content on the USB disk is shared. If you want to only share specific folders, follow the
steps below:
1. Visit http://tplinkwifi.net, then log in with the username and password you set for the router.
2. Go to Advanced > USB Settings > Sharing Access.
3. Focus on the section of Folder Sharing. Click the button to disable Share All, then click Add to add a new sharing folder.
4. Select the Volume Name and Folder Path, then enter a Folder Name as you like.
5. Select Enable Media Sharing and click OK.
Chapter 7 . USB Application 31
Tips:
The router can share 32 volumes at most. You can click on the page to detach the corresponding volume you do not need to share.
7. 4. Printer Sharing
The feature of Printer Sharing helps you share a printer with different computers connected to the router.
1. Install the Driver of the Printer
Make sure you have installed the driver of the printer on each computer that needs printer service.
If you do not have the driver, contact the printer manufacturer.
2. Connect the Printer
Cable a printer to the USB port with the USB cable. Wait several seconds until the USB LED becomes solid on.
Note:
Printers unlisted may be incompatible with the router. You can check Printer Compatibility List to verify whether your printer is supported
by the router: http://www.tp-link.com/common/compatible/print-server/.
3. Install the TP-LINK USB Printer Controller Utility
TP-LINK USB Printer Controller Utility helps you access the shared printer. Download and install the utility on each
computer that needs printer service.
You can get the utility from http://www.tp-link.com/app/usb/. PC Utility is for Windows computer and Mac Utility is for
Mac computer.
Chapter 7 . USB Application 32
4. Access the Printer
You should set the shared printer as Auto-Connect Printer on every computer that needs printer service.
1 ) Double-click the icon on your desktop to launch the USB Printer Controller.
2 ) Highlight the printer you share.
Windows
Mac
3 ) Click the Auto-Connect for printing tab to pull down a list, then select Set Auto-Connect Printer.
Windows
Chapter 7 . USB Application 33
Mac
4 ) Select the printer you share, then click Apply.
Windows
Chapter 7 . USB Application 34
Mac
5 ) You will see the printer marked as Auto-Connect Printer. Now you can print with this printer.
Windows
Mac
Tips:
The Print Server also allows different clients to share the scan feature of MFPs (Multi-Function Printers). To scan with
TP-LINK USB Printer Controller, right-click the printer and select Network Scanner. Then, a scanning window will pop up.
Finish the scanning process by following the on-screen instructions.
Chapter 8 . Parental Controls 35
Parental Controls
This function allows you to block inappropriate, explicit and malicious websites,
and control access to specified websites at specified time.
control what types of websites my children or other home network users can visit and even the time
of day they are allowed to access the Internet.
For example, I want to allow my children’s devices (e.g. a computer or a tablet) to access only www.
tp-link.com and Wikipedia.org from 18:00 (6PM) to 22:00 (10PM) on weekdays and not other time.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Basic or Advanced > Parental Controls and enable Parental Controls.
3. Click Add.
4. Click View Existing Devices, and select the device to be controlled. Or, enter the Device Name and
MAC Address manually.
I want to:
How can I
do that?
8
Chapter 8 . Parental Controls 36
5. Click the icon to set the Internet Access Time. Drag the cursor over the appropriate cell(s) and
click OK.
6. Enter a Description for the entry.
7. Select the checkbox to enable this entry and click OK.
8. Select the restriction mode.
1 ) In Blacklist mode, the controlled devices cannot access any websites containing the specified
keywords during the Internet Access Time period.
2 ) In Whitelist mode, the controlled devices can only access websites containing the specified
keywords during the Internet Access Time period.
9. Click Add a New Keyword. You can add up to 200 keywords for both Blacklist and Whitelist. Below
are some sample entries to allow access.
1 ) Enter a web address (e.g. www.tp-link.com) or a web address keyword (e.g. wikipedia) to only
allow or block access to the websites containing that keyword.
2 ) Specify the domain suffix (eg. .edu or .org) to allow access only to the websites with that
suffix.
3 ) If you wish to block all Internet browsing access, do not add any keyword to the Whitelist.
10. Enter the keywords or websites you want to add and click Save.
Now you can control your children’s Internet access according to your needs.
Done!
Chapter 9 . Bandwidth Control 37
Bandwidth Control
The Bandwidth Control feature is used to fully utilize your limit bandwidth
and optimize the load respectively. With this feature enabled, you can assign a
specific minimum or maximum bandwidth for each computer, thus minimizing
the impact caused when the connection is under heavy load.
Use an independent bandwidth and enjoy a good Internet experience without being affected by
other users who are sharing the same router.
For example, my roommate and I share 512Kbps Upstream Bandwidth and 8Mbps Downstream
Bandwidth via this router, she likes to watch live show and play online games, which may take up
much bandwidth. I don’t want to be affected, so we agree to equally distribute the bandwidth. Our
IP addresses are 192.168.0.101 and 192.168.0.110.
To use the bandwidth control feature, you’d better set static IP Address on each computer to be
controlled or configure Address reservation on the router in order to manage easily. About how to
configure address reservation, please refer to To reserve an IP address for a specified client device.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > Bandwidth Control page.
3. Enable Bandwidth Control.
4. Enter the Total Upstream Bandwidth and the Total Downstream Bandwidth given by your ISP.
(1Mbps=1024Kbps). Click Save to save the settings.
5. Click Add to add controlling rules for each computer respectively.
I want to:
Tips:
How can I
do that?
9
Chapter 9 . Bandwidth Control 38
1 ) IP Range: Enter the IP address. The field can be single IP address or IP address range according
to your demands. When you configure the single IP address, the computer with this IP
address will get independent given bandwidth. When you configure the IP address range, all
computers in the range will share the given bandwidth.
2 ) Port Range: Keep the default settings. The default port range of TCP protocol or UDP protocol
is from 1 to 65535.
3 ) Protocol: Keep the default setting. Or you can choose the TCP protocol or UDP protocol or
both of them.
4 ) Priority: Keep the default setting. You can change the value if you want to first guarantee the
bandwidth for one computer. The smaller value has the higher priority.
5 ) Upstream/Downstream: Enter the bandwidth according to your division.
6 ) Check to enable this entry and click OK to save the settings.
6. Follow the steps above to add a rule for the other computer. And then you will get the following
table.
Now you and your roommate have an independent bandwidth.
Done!
Chapter 10 . Network Security 39
Network Security
This chapter guides you on how to protect your home network from cyber
attacks and unauthorized users by implementing these three network security
functions. You can protect your home network against DoS (Denial of Service)
attacks from flooding your network with server requests using DoS Protection,
block or allow specific client devices to access your network using Access
Control, or you can prevent ARP spoofing and ARP attacks using IP & MAC
Binding function.
This chapter contains the following sections:
• Protect the Network from Cyber Attacks
• Access Control
• IP & MAC Binding
10. 1. Protect the Network from Cyber Attacks
The SPI (Stateful Packet Inspection) Firewall and DoS (Denial of Service) Protection protect the router from cyber attacks.
The SPI Firewall can prevent cyber attacks and validate the traffic that is passing through the router based on the protocol. This
function is enabled by default, and it’s recommended to keep the default setting.
DoS Protection can protect your home network against DoS attacks from flooding your network with server requests. Follow
the steps below to configure DoS Protection.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > Security > Settings.
3. Enable DoS Protection.
4. Set the level (Off, Low, Middle or High) of protection for ICMP-FLOOD Attack Filtering, UDP-FlOOD Attack Filtering and
TCP-SYN-FLOOD Attack Filtering.
• ICMP-FLOOD Attack Filtering - Enable to prevent the Internet Control Message Protocol (ICMP) flood attack.
• UDP-FlOOD Attack Filtering - Enable to prevent the User Datagram Protocol (UDP) flood attack.
• TCP-SYN-FLOOD Attack Filtering - Enable to prevent the Transmission Control Protocol-Synchronize (TCP-SYN) flood attack.
10
Chapter 10 . Network Security 40
Tips:
The level of protection is based on the traffic packets number. The protection will be triggered immediately when the
number of packets exceeds the preset threshold value (the value can be set on Advanced > System Tools > System
Parameters > DoS Protection Level Settings), and the vicious host will be displayed in the Blocked DoS Host List.
5. Select Forbid Lan Ping if you want to ignore the ping packets from LAN port.
6. Select Forbid Wan Ping if you want to ignore the ping packets from WAN port.
7. Click Save to make the settings effective.
10. 2. Access Control
Access Control is used to block or allow specific client devices to access your network (via wired or wireless) based on a list of
blocked devices (Blacklist) or a list of allowed devices (Whitelist).
Block or allow specific client devices to access my network (via wired or wireless).
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > Security > Access Control.
3. Enable Access Control.
4. Select the access mode to either block (recommended) or allow the device(s) in the list.
To block specific device(s)
1 ) Select Blacklist.
2 ) Select the device(s) to be blocked in the Devices Online table.
3 ) Click Block above the Devices Online table. The selected devices will be added to Devices in
Blacklist automatically.
I want to:
How can I
do that?
Chapter 10 . Network Security 41
To allow specific device(s)
1 ) Select Whitelist and click Save.
2 ) Click Add.
3 ) Enter the Device Name and MAC Address (You can copy and paste the information from the
following list if the device is connected to your network).
4 ) Click OK.
Now you can block or allow specific client devices to access your network (via wired or wireless)
using the Blacklist or Whitelist.
10. 3. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind network device’s IP address to its MAC
address. This will prevent ARP Spoofing and other ARP attacks by denying network access to an device with matching IP
address in the Binding list, but unrecognized MAC address.
Prevent ARP spoofing and ARP attacks.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > Security > IP & MAC Binding.
Done!
I want to:
How can I
do that?
Chapter 10 . Network Security 42
3. Enable IP & MAC Binding.
4. Bind your device(s) according to your need.
To bind the connected device(s)
1 ) Select the device(s) to be bound in the ARP List.
2 ) Click Bind to add to the Binding List.
To bind the unconnected device
1 ) Click Add.
2 ) Enter the MAC address and IP address that you want to bind.
3 ) Select the checkbox to enable the entry and click OK.
Now you don’t need to worry about ARP spoofing and ARP attacks.
Done!
Chapter 11 . Customize Your Network Settings 43
Customize Your Network
Settings
This chapter guides you on how to configure advanced networking features
that are available for this router.
This chapter contains the following sections:
• Change the LAN Settings
• Configure to Support IPTV Service
• Specify DHCP Server Settings
• Set Up a Dynamic DNS Service Account
• Create Static Routes
• Specify Wireless Settings
• Use WPS for Wireless Connection
• Schedule Your Wireless Function
• Set up a VPN Connection
11. 1. Change the LAN Settings
The router is preset with a default LAN IP 192.168.0.1, which you can use to log in to its web-based management page. The
LAN IP address together with the Subnet Mask also defines the subnet that the connected devices are on. If the IP address
conflicts with another device on your local network or your network requires a specific IP subnet, you can change it.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > Network > LAN page.
3. Type in a new IP address appropriate to your needs.
4. Leave the Subnet Mask as the default settings.
5. Keep IGMP Snooping as enabled by default. IGMP Snooping is the process of listening to IGMP (Internet Group
Management Protocol) network traffic. The function prevents hosts on a local network from receiving traffic for a
multicast group they have not explicitly joined.
6. Click Save.
Note:
If you have set the Virtual Server, DMZ or DHCP address reservation, and the new LAN IP address is not in the same subnet with the old one,
then you should reconfigure them.
11. 2. Configure to Support IPTV Service
IPTV is the abbreviation of Internet Protocol Television. The service can only be delivered through the Internet, and our router
provides a specific LAN port for IPTV.
By automatically seperating IPTV from Internet surfing, we guarantee you a high quality of vedio streaming and a high speed
of Internet surfing.
11
Chapter 11 . Customize Your Network Settings 44
Configure the router to enable Internet Protocol Television (IPTV) Services.
For example, I already bought IPTV service, but this service can only be delivered through the
Internet. Therefore, I need to configure my router first.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > Network > IPTV to open the configuration page.
3. Configure IPTV settings:
1 ) Select the Enable IPTV check box.
2 ) Select the appropriate Mode according to your ISP. Select Bridge if your ISP is not listed and
no other parameters are required, and then skip to substep 4. Select Custom if your ISP is not
listed but provides necessary parameters.
3 ) After you have selected a mode, the necessary parameters are predetermined. You can
perform other configuration, e.g. enter the IPTV Multicast VLAN ID and select the IPTV
Multicast VLAN Priority in Russia mode according to your ISP.
4 ) Select the IGMP Proxy version, either V2 or V3, according to the information provided by your
ISP.
5 ) For Russia, Singapore-ExStream, Malaysia-Unifi and Malaysia-Maxis mode, connect device to the
predetermined LAN port. For Bridge and Custom mode, select a LAN port as the IPTV port and connect
the set-top box to the corresponding port.
6 ) Click Save.
Your IPTV setup is done now! You may need other configurations on your set-top box before
enjoying your TV.
11. 3. Specify DHCP Server Settings
By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the router acts as a DHCP server; it
dynamically assigns TCP/IP parameters to client devices from the IP Address Pool. You can change the settings of DHCP Server
if necessary, and you can reserve LAN IP address for specified client device.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > Network > DHCP Server.
I want to:
How can I
do that?
Done!
Chapter 11 . Customize Your Network Settings 45
To specify the IP address that the router assigns
1. Make sure that the Enable DHCP Server checkbox is selected.
2. Enter the starting and ending IP address in the IP Address Pool.
3. Enter other parameters if the ISP offers, the Default Gateway is automatically filled, which is the same as the LAN IP
address of the router.
4. Click Save to make the settings effective.
To reserve an IP address for a specified client device
1. Click the Add button.
Chapter 11 . Customize Your Network Settings 46
2. Enter the MAC address of the device for which you want to reserve IP address.
3. Specify the IP address which will be reserved by the router.
4. Check to Enable this entry and click OK to make the settings effective.
Note:
You can also appoint IP addresses within a specified range to devices of the same type by using Condition Pool feature. For example, you
can assign IP addresses within the range (192.168.0.50 to192.168.0.80) to Camera devices, thus facilitating the network management.
11. 4. Set Up a Dynamic DNS Service Account
Most ISPs (Internet service provieders) assign a dynamic IP address to the router and you can use this IP address to access your
router remotely. However, the IP address can change any time and you don’t know when it changes. In this case, you might
need the DDNS (Dynamic Domain Name Server) feature on the router to allow you and your friends to access your router and
local servers (FTP, HTTP, etc.) using domain name, in no need of checking and remembering the IP address.
Note: DDNS does not work if the ISP assigns a private Internet IP address (such as 192.168.0.x) to the router.
To set up DDNS, please follow the instructions below:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > Network > Dynamic DNS.
3. Select the DDNS Service Provider (Dyndns or NO-IP). If you don’t have a DDNS account, select a service provider and click
Go to register.
4. Enter the username, password and domain name of the account.
5. Click Login and click Save.
Tips: If you want to use a new DDNS account, please Logout first, then log in with the new account.
Chapter 11 . Customize Your Network Settings 47
11. 5. Create Static Routes
Static routing is a form of routing that is configured manually by a network administrator or a user by adding entries into
a routing table. The manually-configured routing information guides the router in forwarding data packets to the specific
destination.
Visit multiple networks and multiple servers at the same time.
For example, in a small office, my PC can surf the Internet, but I also want to visit my company’s
network. Now I have a switch and another router. I connect the devices as shown in the following
figure so that the physical connection between my PC and my company’s server is achieved. To surf
the Internet and visit my company’s network at the same time, I need to configure the static routing.
PC 1
PC 2
Router 2
Router 1
Router 3
LAN: 192.168.0.1
192.168.0.100
LAN: 192.168.0.2
WAN: 172.30.30.100
172.30.30.1
1. Change the router’s LAN IP addresses to two different IP addresses on the same subnet. Disable
Router 2’s DHCP function.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
3. Go to Network > Advanced Routing.
4. Click Add to add a new static routing entry.
5. Finish the settings according to the following explanations:
I want to:
How can I
do that?
Chapter 11 . Customize Your Network Settings 48
Destination IP: The destination IP address that you want to assign to a static route. This IP address
cannot be on the same subnet with the WAN IP or LAN IP of the router. In the example, the IP
address of the company network is the destination IP address, so here enters 172.30.30.1.
Subnet Mask: Determines the destination network with the destination IP address. If the destination
is a single IP address, enter 255.255.255.255; otherwise, enter the subnet mask of the corresponding
network IP. In the example, the destination network is a single IP, so here enters 255.255.255.255.
Gateway: The IP address of the gateway device to which the data packets will be sent. This IP address
must be on the same subnet with the router’s IP which sends out the data. In the example, the
data packets will be sent to the LAN port of Router 2 and then to the Server, so the default gateway
should be 192.168.0.2.
Interface: Determined by the port (WAN/LAN) that sends out the data packets. In the example, the
data is sent to the gateway through the LAN port, so LAN should be selected.
Status: Determines the status of the entry. In the example, Enabled should be selected.
6. Click OK to save the settings.
7. Check the System Routing Table below. If you can find the entry you set, the static routing is set
successfully.
Open a web browser on your PC. Enter the company server’s IP address to visit the company network.
11. 6. Specify Wireless Settings
The router’s wireless network names (SSIDs) and passwords, and security options are preset in the factory. The preset SSIDs
and passwords can be found on the product label. You can customize the wireless settings according to your needs.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
Done!
Chapter 11 . Customize Your Network Settings 49
2. Go to Basic > Wireless.
To enable or disable the wireless function:
The wireless radio is enabled by default, if you want to disable the 2.4GHz, 5GHz-1, or 5GHz-2 wireless function, just clear the
corresponding Enable checkbox.
To change the wireless network name (SSID) and wireless password:
Create a new SSID in Wireless Network Name (SSID) and customize the password for the network in Password. The default
SSID is TP-LINK_XXXX for 2.4GHz, TP-LINK_XXXX_5G_1 for 5GHz-1, and TP-LINK_XXXX_5G_2 for 5GHz-2, and the value is
case-sensitive.
Note:
If you use a wireless device to change the wireless settings, you will be disconnected when the settings are effective. Please write down the
new SSID and password for future use.
To hide SSID:
Select Hide SSID, and your SSID will not broadcast. Your SSID won’t display when you scan for local wireless network list on
your wireless device and you need to manually join the network.
Advanced Settings:
Go to Advanced > Wireless >Wireless Settings.
Chapter 11 . Customize Your Network Settings 50
To use the smart connect function
The smart connect function helps devices run faster by assigning them to best wireless bands based on actual conditions to
balance network demands.
1. Select the Smart Connect checkbox, and click Save.
2. Keep the default or set a new SSID and password, and click Save.
This SSID and password will be applied for 2.4GHz, 5GHz-1, and 5GHz-2 wireless networks.
To change the security option:
In the Wireless section, select an option from the Security dropdown list.
The router provides four security options, No Security, WPA/WPA2 - Personal (Recommended), WPA/WPA2 - Enterprise and
WEP. We recommend you don’t change the default settings unless necessary. If you select other options, configure the related
parameters according to the help page.
In addition
• Mode - Select a transmission mode according to your wireless client devices. 802.11b/g/n mixed, 802.11g/n mixed or
802.11n only for 2.4GHz; and 802.11a/n/ac mixed, 802.11n/ac mixed or 802.11ac only for 5GHz. It is recommended to just
leave it as default.
• Channel Width - Select a channel width (bandwidth) for the wireless network.
• Channel - Select an operating channel for the wireless network. It is recommended to leave the channel to Auto, if you are
not experiencing the intermittent wireless connection issue.
• Transmit Power - Select either High, Middle or Low to specify the data transmit power. The default and recommended
setting is High.
Chapter 11 . Customize Your Network Settings 51
11. 7. Use WPS for Wireless Connection
Wi-Fi Protected Setup(WPS) gives consumers an easier approach to set up a security-protected Wi-Fi connection.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > Wireless > WPS .
11. 7. 1. Set the Router’s PIN
Router’s PIN is enabled by default to allow wireless devices to connect to the router using the PIN. You can use the default
one or generate a new one.
Note:
1. If you want to enable/disable the WPS feature, go to System Tools > System Parameters > WPS, select or clear the Enable WPS check
box.
2. PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported devices can
connect to your router with the PIN. The default PIN is labeled on the bottom of the router.
11. 7. 2. Use the WPS Wizard for Wi-Fi Connections
1. Select a setup method:
• Push Button (Recommended): Click the Connect button on the screen. Within two minutes, push the WPS button on the
client device.
• PIN Code: Enter the client’s PIN, and click Connect.
Chapter 11 . Customize Your Network Settings 52
2. Success will appear on the above screen and the WPS LED on the router will keep on for five minutes if the client has
been successfully added to the network.
11. 8. Schedule Your Wireless Function
You can automatically turn off your wireless network at the time when you do not need the wireless connection.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > Wireless > Wireless Schedule page.
3. Select the 2.4GHz wireless network to configure. Toggle on the button to enable the Wireless Schedule feature.
Chapter 11 . Customize Your Network Settings 53
4. Set the time. Drag the cursor to cover the time area and click Save to make the settings effective. The selected time will
be in green.
5. Repeat steps 3 and 4 to set time for 5GHz-1 and 5GHz-2 wireless networks.
Note:
1. If you just set time for one wireless band, the other wireless band is still always on, so set time for both of the two bands to schedule
your whole wireless network.
2. The wireless LED (2.4GHz , 5GHz-1, and 5GHz-2 ) will turn off if the corresponding wireless network is disabled.
3. The wireless network will be automatically turned on after the time period you set.
11. 9. Set up a VPN Connection
VPN (Virtual Private Network) is a private network established across the public network, generally via the Internet. However,
the private network is a logical network without any physical network lines, so it is called Virtual Private Network.
With the wide application of the Internet, more and more data are needed to be shared through the Internet. Connecting the
local network to the Internet directly, though can allow the data exchange, will cause the private data to be exposed to all the
users on the Internet.
The VPN (Virtual Private Network) technology is developed and used to establish the private network through the public
network, which can provides a secure communication to a remote computer or remote network, and guarantee a secured
data exchange. IPSec is one of the major implementations of VPNs.
Establish an IPSec VPN tunnel to connect two LANs via Internet so that the hosts in different remote
LANs are able to communicate with each as if they are in the same LAN.
For example, I am the network administrator of a regional office, I need to let my office staff can visit
the headquarter’s servers and resources, and vice versa. I know that the router in my office and the
device in headquarter both support IPSec VPN feature, so I decide to set up a VPN connection with
the headquarter office.
The following diagram is a typical VPN topology. Here Site A refers to regional office’s network (local
network). And Site B refers to the headquarter’s network (remote network) which I want to connect.
Router 1 Router 2
LAN: 192.168.1.1
WAN: 219.134.112.246
PC 1
Subnetmask: 255.255.255.0
WAN: 219.134.112.247
PC 2
LAN: 192.168.2.1
Subnetmask: 255.255.255.0
Site A Site B
1. Make sure of the topology you want to build and record site A (local network) and site B (remote
network)’s LAN IP and WAN IP.
2. Configuration on site A (local network).
1 ) Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2 ) Go to Advanced > Network > IPSec VPN to open the configuration page. Click Add to set up
a VPN tunnel.
I want to:
How can I
do that?
Chapter 11 . Customize Your Network Settings 54
3 ) In the IPSec Connection Name column, specify a name.
4 ) In the Remote IPSec Gateway (URL) column, Enter Site B’s WAN IP address.
5 ) To configure Site A’s LAN:
In the Tunnel access from local IP addresses column, here we take Subnet Address as an
example. Then input the LAN IP range of Site A in the IP Address for VPN column, and input
Subnet Mask of Site A.
6 ) To configure Site B’s LAN:
In the Tunnel access from remote IP addresses column, here we take Subnet Address as an
example. Then input the LAN IP range of Site B in the IP Address for VPN column, and input
Subnet Mask of Site B.
7 ) Select the Key Exchange Method for the policy. We select Auto(IKE) here.
8 ) Enter the Pre-Shared Key for IKE authentication. Then keep Perfect Forward Secrecy enabled.
Note:
• The key should consist of visible characters without blank space.
• Make sure Site A and Site B use the same key.
Chapter 11 . Customize Your Network Settings 55
9 ) Leave the Advanced Settings as default value. Then click OK to save.
3. Configuration on Site B (remote network). Refer to step 2 configuration on Site A and make sure
that Site A and Site B use the same Pre-shared keys and Perfect Forward Secrecy settings.
4. The Status column will change to UP if the VPN connection has been set up successfully.
5. Check the VPN connection. You can ping site B’ LAN IP from your computer in site A to verify that
the IPSec VPN connection is set up correctly.
Tips: To check the VPN connection, you can do the following.
a . On the host in Site A, press [Windows Logo] + [R] to open Run dialog. Input “cmd” and hit OK.
b . In the CLI window, type in “ping 192.168.2.x” (“192.168.2.x” can be IP address of any host in
Site B). Then press [Enter].
If Ping proceeds successfully (gets replies from host in Site B), the IPSec connection is working
properly now.
Now IPSec VPN is implemented to establish a connection.
Note:
1. The product supports a maximum of ten simultaneous connections.
2. If one of the site has been off line for a while, for example, if Site A has been disconnected, on Site B you need to click Disable and then
click Enable after Site A back on line in order to re-establish the IPSec tunnel.
Done!
Chapter 12 . Manage the Router 56
Manage the Router
This chapter will show you the configuration for managing and maintaining
your router.
This chapter includes the following sections:
• Set Up System Time
• Test the Network Connectivity
• Upgrade the Firmware
• Backup and Restore Configuration Settings
• Change the Administrator Account
• Local Management
• Remote Management
• System Log
• SNMP Settings
• Monitor the Internet Traffic Statistics
• Control LEDs
12. 1. Set Up System Time
System time is the time displayed while the router is running. The system time you configure here will be used for other time-
based functions like Parental Controls and Wireless Schedule. You can manually set how to get the system time.
Follow the steps below to set your system time.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > System Tools > Time Settings page.
3. Configure the system time using the following methods :
Manually: Select your time zone and enter your local time.
Get from PC: Click this button if you want to use the current managing PC’s time.
Get GMT: Click this button if you want to get time from the Internet. Make sure your router can access the Internet before
you select this way to get system time.
4. Click Save to make your settings effective.
5. After setting the system time, you can set Daylight Saving time according to your needs. Tick the checkbox to enable
Daylight Saving, set the start and end time and then click Save to make the settings effective.
12
Chapter 12 . Manage the Router 57
12. 2. Test the Network Connectivity
Diagnostics is used to test the connectivity between the router and the host or other network devices.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > System Tools > Diagnostics.
3. Enter the information with the help of page tips:
1 ) Choose Ping or Traceroute as the diagnostic tool to test the connectivity;
• Ping is used to test the connectivity between the router and the tested host, and measure the round-trip time.
• Traceroute is used to display the route (path) your router has passed to reach the tested host, and measure transit delays of
packets across an Internet Protocol network.
2 ) Enter the Target IP Address/Domain Name of the tested host.
4. Click Start to begin the diagnostics.
Tips:
Click Advanced, you can modify the packet count, packet size, test timeout time or max hop. It’s recommended to keep the default value.
The figure below indicates the proper connection between the router and the Yahoo server (www.Yahoo.com) tested through
Ping.
The figure below indicates the proper connection between the router and the Yahoo server (www.Yahoo.com) tested through
Traceroute.
Chapter 12 . Manage the Router 58
12. 3. Upgrade the Firmware
TP-LINK is dedicated to improving and richening the product features, giving you a better network experience. We will release
the latest firmware at TP-LINK official website, you can download the latest firmware file from the Support page of our website
www.tp-link.com and upgrade the firmware to the latest version.
Note:
1. Make sure the latest firmware file is matched with the hardware version (as shown in the webpage).
2. Make sure that you have a stable connection between the router and your computer. It is NOT recommended to upgrade the firmware
wirelessly.
3. Make sure you remove any USB storage device connected to the router before the firmware upgrade to prevent data loss.
4. Backup your router configuration.
5. Do NOT turn off the router during the firmware upgrade.
Follow the steps to upgrade the firmware.
1. Download the latest firmware file for the router from our website www.tp-link.com.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
3. Go to Advanced > System Tools > Firmware Upgrade.
4. Click Browse to locate the downloaded new firmware file, and click Upgrade.
5. Wait a few moments for the upgrading and rebooting.
12. 4. Backup and Restore Configuration Settings
The configuration settings are stored as a configuration file in the router. You can backup the configuration file to your
computer for future use and restore the router to a previous settings from the backup file when needed. Moreover, if necessary
you can erase the current settings and reset the router to the default factory settings.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > System Tools > Backup & Restore.
To backup configuration settings:
Chapter 12 . Manage the Router 59
Click Backup to save a copy of the current settings to your local computer. A ‘.bin’ file of the current settings will be stored to
your computer.
To restore configuration settings:
1. Click Browse to locate the backup configuration file stored on your computer, and click Restore.
2. Wait a few moments for the restoring and rebooting.
Note: During the restoring process, do not turn off or reset the router.
To reset the router to factory default settings:
1. Click Factory Restore to reset the router.
2. Wait a few moments for the reset and reboot.
Note:
1. During the resetting process, do not turn off or reset the router.
2. We strongly recommend you backup the current configuration settings before resetting the router.
12. 5. Change the Administrator Account
The account management feature allows you to change your login username and password of the web-based management
page.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router before.
2. Go to Advanced > System Tools > Administration and complete the settings in Account Management section.
Chapter 12 . Manage the Router 60
3. Enter the old username and old password. Enter the new username and enter the new password twice (both case-
sensitive). Click Save.
Use the new username and password for the following logins.
12. 6. Local Management
You can control the local devices’ authority to manage the router via Local Management feature. By default all local connected
devices are allowed to manage the router. You can also allow only one device to manage the router.
Follow the steps below to specify the local management.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > System Tools> Administration page. Locate the Local Management section.
3. Keep the Port as the default setting. Enter the IP address or MAC address of the local device to manage the router.
Note:
1 ) The IP address of the local device must be in the same subnet as the router’s LAN IP address.
2 ) If you want that all local devices can manage the router, just leave the IP/MAC Address field blank.
4. Click Save to make the settings effective. Now only the device using the IP address or MAC address you set can manage
the router.
12. 7. Remote Management
By default, the remote devices are not allowed to manage the router from the Internet.
Follow the steps below to allow remote devices to manage the router.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > System Tools> Administration page. Locate the Remote Management section.
Chapter 12 . Manage the Router 61
3. Tick the checkbox to enable Remote Management.
4. Keep the Port as the default setting. Enter the IP address or MAC address of the remote device to manage the router.
Note: If you want that all remote devices can manage the router, just leave the IP/MAC Address field blank.
5. Click Save to make the settings effective. Now, only the device using the IP address or MAC address you set can log in to
http://router’s Internet IP address:port number (such as http://113.116.60.229:80) to manage the router remotely.
Tips:
1 ) You can find the Internet IP address of the router on Basic > Network Map > Internet.
2 ) The router’s Internet IP is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want to
log in to the router through a domain name.
12. 8. System Log
System Log can help you know what happened to your router, facilitating you to locate the malfunctions. For example
when your router does not work properly, you will need to save the system log and send it to the technical support for
troubleshooting.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Click Advanced > System Tools > System Log page.
Chapter 12 . Manage the Router 62
To view the system logs:
1. Select the log Type. Select ALL to view all kinds of logs, or select IGMP or PPP to view the specific logs.
2. Select the log Level and you will see the logs with the specific or higher levels.
3. Click Refresh to refresh the log list.
To save the system logs:
You can choose to save the system logs to your local computer or a remote server.
Click Save Log to save the logs in a txt file to your computer.
Click Log Settings to set the save path of the logs.
Chapter 12 . Manage the Router 63
• Save Locally: Select this option to cache the system log to the router’s local memory, select the minimum level of system
log to be saved from the drop-down list. The logs will be shown in the table in descending order on the System Log page.
• Save Remotely: Select this option to send the system log to a remote server, select the minimum level of system log to be
saved from the drop-down list and enter the information of the remote server. If the remote server has a log viewer client
or a sniffer tool implemented, you can view and analyze the system log remotely in real-time.
12. 9. SNMP Settings
SNMP (Simple Network Management Protocol) has been widely applied in the computer networks currently, which is used for
ensuring the transmission of the management information between two nodes. In this way, network administrators can easily
search and modify the information on any node on the network. Meanwhile, they can locate faults promptly and implement
the fault diagnosis, capacity planning and report generating.
An SNMP Agent is an application running on the router that performs the operational role of receiving and processing SNMP
messages, sending responses to the SNMP manager, and sending traps when an event occurs. So a router contains SNMP
“agent” software can be monitored and/or controlled by SNMP Manager using SNMP messages.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > System Tools > SNMP Settings page.
• Enable SNMP Agent: Toggle On to enable the built-in SNMP agent that allows the router to operate as the operational role
in receiving and processing of SNMP messages, sending responses to the SNMP manager, and triggering SNMP traps when
an event occurs.
• Read-only Community: Displays the default public community string that protects the router from unauthorized access.
• Set Community: Displays the default read and write community string that protects the router from unauthorized changes.
• System Name: Displays the administratively-assigned name for this managed device.
• System Description: Displays the textual description of the managed device. This value should include the full name and
version identification of the system’s hardware type, software operating-system, and networking software.
• System Location: Displays the physical location of this device (e.g., telephone closet, 3rd floor).
• System Contact: Displays the textual identification of the contact person for this managed device, together with information
on how to contact this person.
• Trap Manager IP: Displays the IP address of the host to receive the traps.
You are suggested to keep the default settings. Click Save to make the settings effective.
Chapter 12 . Manage the Router 64
12. 10. Monitor the Internet Traffic Statistics
The Traffic Statistics page displays the network traffic of the LAN, WAN and WLAN sent and received packets, allows you to
monitor the volume of Internet traffic statistics.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > System Tools > Traffic Statistics.
3. Toggle on Traffic Statistics, and then you can monitor the traffic statistics in Traffic Statistics List section.
Tips: This function is enabled by default.
Click Refresh to update the statistic information on the page.
Click Reset All to reset all statistic values in the list to zero.
Click Delete All to delete all statistic information in the list.
Click to reset the statistic information of the specific device.
Click to delete the specific device item in the list.
12. 11. Control LEDs
The router LEDs indicate router activities and behavior. You can turn on or turn off the router from the web-based management
page.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > System Tools > System Parameters.
3. In the LED section, enable the Night Mode.
4. Specify a time period according to your needs, and the LEDs will be off during the period.
5. Click Save to make the settings effective.
Chapter 12 . Manage the Router 65
Appendix A: Specications 66
Appendix A: Specications
HARDWARE FEATURES
Interfaces
4 10/100/1000Mbps LAN Ports,
1 10/100/1000Mbps WAN Port
1 USB 3.0 Port + 1 USB 2.0 Port
Button
Wireless On/Off Button
Power On/off Button
LED On/off Button
WPS Button
Reset Button
External Power Supply 12V/5A
Dimensions (W X D X H) 7.9 X 7.9 X 1.5 in. (200 X 200 X 39mm)
Antenna 3 dual band Fixed antennas & 3 single band Fixed antennas
WIRELESS FEATURES
Wireless Standards IEEE 802.11ac/n/a 5GHz
IEEE 802.11b/g/n 2.4GHz
Frequency 2.4GHz, 5GHz Band1/Band4
Signal Rate
5GHz Band1: Up to 1300Mbps
5GHz Band2: Up to 1300Mbps
2.4GHz: Up to 600Mbps
Reception Sensitivity
5GHz:
11a 6Mbps: -94dBm
11a 54Mbps: -76dBm
11ac HT20: -68dBm
11ac HT40: -64dBm
11ac HT80: -60dBm
2.4GHz
11g 54M: -77dBm
11n HT20: -73dBm
11n HT40: -71dBm
Wireless Functions Enable/Disable Wireless Radio, WMM, Wireless Statistics
Wireless Security 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryption
Transmission Power
CE:
<20dBm(2.4GHz)
<23dBm(5GHz)
FCC:
<30dBm
Guest Network 2.4GHz guest network × 1
5GHz guest network × 2
OTHERS
Certification FCC, RoHS
Package Contents
AC 3200 Wireless Tri-Band Gigabit Router Archer C3200
Power supply unit
Ethernet Cable
Quick Installation Guide
System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux
Appendix A: Specications 67
HARDWARE FEATURES
Environment
Operating Temperature: 0℃~40 ℃ (32 ℉~104℉)
Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
* Only 2.412GHz~2.462GHz is allowed to be used in USA, which means only channel 1~11 is available for American users to choose.
Appendix B: FAQ 68
Appendix B: FAQ
Q1. What can I do if I forgot my wireless password?
The default password is labeled at the back of the router. If the password has been altered, please connect the router to the
computer using a cable and follow the steps below:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Basic > Wireless to obtain your wireless password.
Q2. How to retrieve the username and password of the web management page?
The default username and password of the web management page are admin (in lower case). If the password has been
altered, please follow the steps below:
1. Reset the router to factory default settings: Press and hold the Reset button for about 7 seconds and then release;
2. Visit http://tplinkwifi.net;
3. Enter admin (in lower case) as both username and password to login.
Note: You’ll need to reconfigure the router to surf the Internet once the router is reset, and please mark down your new password for
future use.
Q3. I cannot login to the router’s web management page, what can I do?
This can happen for a variety of reasons, please try the methods below and try again.
1. Make sure the router connects to the computer correctly and the corresponding LED indicator(s) light up.
2. Make sure the IP address of your computer is configured as Obtain an IP address automatically and Obtain DNS server
address automatically.
3. Make sure the http://tplinkwifi.net you input is right.
4. Check your computer’s settings:
1 ) Go to Start > Control Panel > Network and Internet, and click View network status and tasks;
2 ) Click Internet Options on the bottom left;
3 ) Click Connections, select Never dial a connection;
Appendix B: FAQ 69
4 ) Click LAN settings, deselect the following three options and click OK;
5 ) Go to Advanced > Restore advanced settings, click OK to save the settings.
Appendix B: FAQ 70
5. Change a web browser or computer and login again.
6. Reset the router to factory default settings: Press and hold the Reset button for about 7 seconds and then release.
Note: You’ll need to reconfigure the router to surf the Internet once the router is reset.
Open a web browser and login again. If login still fails, please contact the technical support.
Q4. I cannot access the Internet even though the configuration is finished, what can I do?
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > Status to check Internet status:
• If IP Address is a valid IP address, please try the methods below and try again:
Appendix B: FAQ 71
1. Your computer might not recognize any DNS server addresses, please manually configure DNS server.
1 ) Go to Advanced > Network > DHCP Server;
2 ) Enter 8.8.8.8 as Primary DNS, click Save.
Tips: 8.8.8.8 is a safe and public DNS server operated by Google.
2. Power cycle the modem and the TP-LINK router.
1 ) Power off your modem and TP-LINK router, leave them off for 1 minute;
2 ) Power on your modem first, wait about 2 minutes until it get a solid cable or Internet light;
3 ) Power back TP-LINK router;
4 ) Wait another 1 or 2 minutes and check the Internet access.
3. Reset the router to factory default settings and reconfigure.
Note: You’ll have to reconfigure the router to access the Internet once the router is reset.
1 ) Reset the router to factory default settings: press and hold the RESET button for about 7 seconds and then release;
2 ) Reconfigure the router with the help of Quick Setup.
4. Please refer to Upgrade the Firmware to upgrade the firmware of the router.
• If the IP Address is 0.0.0.0, please try the methods below and try again:
Appendix B: FAQ 72
1. Check the physical connection.
Make sure the physical connection between the router and the modem is proper.
2. Clone the MAC address of your computer.
1 ) Visit http://tplinkwifi.net, and log in with the username and password you set for the router;
2 ) Go to Advanced > Network > Internet;
3 ) Choose an option to your need (Enter the MAC address if Use Custom MAC Address is selected), and click Save.
Tips:
• Some ISP will register the MAC address of your computer when you access the Internet for the first time through their Cable
modem, if you add a router into your network to share your Internet connection, the ISP will not accept it as the MAC address is
changed, so we need to clone your computer’s MAC address to the router.
• The MAC addresses of a computer in wired connection and wireless connection are different.
3. Modify the LAN IP address of the router.
Note:
Most TP-LINK routers use 192.168.0.1/192.168.1.1 as their default LAN IP address, it may be conflicting with the IP range of your existent
ADSL modem/router. If so, the router is not able to communicate with your modem and cause you can’t access the Internet. To resolve
the problem, we need to change the LAN IP address of the router to avoid such conflict, for example, 192.168.2.1.
1 ) Visit http://tplinkwifi.net, and log in with the username and password you set for the router;
2 ) Go to Advanced > Network > LAN;
3 ) Modify the LAN IP address as the follow picture shows. Here we take 192.168.2.1 as an example;
4 ) Click Save.
Appendix B: FAQ 73
4. Power cycle the modem and the TP-LINK router.
1 ) Power off your modem and TP-LINK router, leave them off for 1 minute;
2 ) Power on your modem first, wait about 2 minutes until it get a solid cable or Internet light;
3 ) Power back TP-LINK router;
4 ) Wait another 1 or 2 minutes and check the Internet access.
5. Double check the Internet Connection Type.
1 ) Confirm your Internet Connection Type, which can be learned from the ISP;
2 ) Visit http://tplinkwifi.net, and log in with the username and password you set for the router;
3 ) Go to Advanced > Network > Internet;
4 ) Select your Internet Connection Type and fill in other parameters with the help of page tips;
5 ) Click Save.
6 ) Power cycle the modem and the TP-LINK router again.
3. Please refer to Upgrade the Firmware to upgrade the firmware of the router.
4. Check the TCP/IP settings on the particular device if all other devices can get Internet from the router.
If you’ve tried every method above but cannot access the Internet, please contact the technical support.
Appendix B: FAQ 74
Q5. I cannot find my wireless network or I cannot connect the wireless network, what can I do?
If you fail to find any wireless network, please follow the steps below:
1. Make sure the wireless function is enabled if you’re using a laptop with built-in wireless adapter. You can refer to the
relevant document or contact the laptop manufacturer.
2. Make sure the wireless adapter driver is installed successfully and the wireless adapter is enabled.
On Windows 7
1 ) If you see the message No connections are available, it is usually because the wireless function is disabled or blocked
somehow;
2 ) Clicking on Troubleshoot and windows might be able to fix the problem by itself.
On Windows XP
1 ) If you see the message Windows cannot configure this wireless connection, this is usually because windows
configuration utility is disabled or you are running another wireless configuration tool to connect the wireless;
2 ) Exit the wireless configuration tool( the TP-LINK Utility, for example);
3 ) Select and right click on My Computer on desktop, select Manage to open Computer Management window;
4 ) Expand Services and Applications > Services, find and locate Wireless Zero Configuration in the Services list on the
right side;
5 ) Right click Wireless Zero Configuration, and then select Properties;
6 ) Change Startup type to Automatic, click on Start button and make sure the Service status is Started. And then click
OK.
7 ) Connect to wireless network.
If you can find other wireless network except your own, please follow the steps below:
1. Check the wireless LEDs on your wireless router/modem;
2. Make sure your computer/device is still in the range of your router/modem, move closer if it is currently too far away;
3. Go to Advanced > Wireless > Wireless Settings, and check the wireless router settings, double check your Wireless
Network Name, make sure the wireless is not hided;
Appendix B: FAQ 75
4. Connect to wireless network.
If you can find your wireless network but fail to connect, please follow the steps below:
• Authenticating problem, password mismatch:
1. Sometimes it will ask you to type in a PIN number when you connect to the wireless network for the first time. This PIN
number is different from the Wireless Password/Network Security Key, usually you can only find it on the back of your
wireless router;
2. If you cannot find the PIN or PIN failed, you may choose Connecting using a security key instead, and then type in the
Wireless Password/Network Security Key;
3. If it continues on saying Network Security Key Mismatch, it is suggested to confirm the wireless password of your wireless
router;
Note: Wireless Password/Network Security Key is case sensitive.
4. Connect to wireless network.
Appendix B: FAQ 76
• Windows was unable to connect to XXXX /Can not join this network/Taking longer than usual to connect to this network:
1. Check the wireless signal strength of your network, if it is weak (1~3 bars), please move the router closer and try again;
2. Change the wireless Channel of the router to 1,6,or 11 to reduce interference from other networks;
3. Re-install or update the driver for your wireless adapter of the computer;
4. Connect to wireless network.
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD.
Other brands and product names are trademarks or registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as
translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2016 TP-
LINK TECHNOLOGIES CO., LTD. All rights reserved.
http://www.tp-link.com
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1 ) This device may not cause harmful interference.
2 ) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this
equipment. Such modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its
antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The
antennas used for this transmitter must be installed to provide a separation distance of at least 27 cm from all persons and
must not be co-located or operating in conjunction with any other antenna or transmitter.”
The device operates in 5.15 ~ 5.25GHz / 5.745 ~ 5.85 GHz frequency range. It is restricted in indoor environment only. This
device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be
required to take adequate measures.
This device meets the EU requirements (1999/5/EC Article 3.1a) on the limitation of exposure of the general public to
electromagnetic fields by way of health protection.
The device complies with RF specifications when the device used at 20 cm from your body.
Restricted to indoor use.
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes :
1. l’appareil nedoit pas produire de brouillage, et
2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Caution:
1. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference
to co-channel mobile satellite systems;
2. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz
shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point
operation as appropriate; and
The high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and
that these radars could cause interference and/or damage to LE-LAN devices.
Avertissement:
1. Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de
réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
2. Le gain maximal d’antenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit
se conformer à la limitation P.I.R.E spécifiée pour l’exploitation point à point et non point à point, selon le cas.
En outre, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs
principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer
du brouillage et/ou des dommages aux dispositifs LAN-EL.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 32cm between the radiator & your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de 32 cm de distance entre la source de rayonnement et votre
corps.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Korea Warning Statements:
당해 무선설비는 운용중 전파혼신 가능성이 있음.
NCC Notice & BSMI Notice:
注意！
依據 低功率電波輻射性電機管理辦法
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率
或變更原設計之特性或功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干擾現象時，應立即停用，並改
善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電信。低功率射頻電機需忍受合法通信
或工業、科學以及醫療用電波輻射性電機設備之干擾。
減少電磁波影響，請妥適使用。
安全諮詢及注意事項
• 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。
• 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。
• 注意防潮，請勿將水或其他液體潑灑到本產品上。
• 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。
• 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。
• 請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。
Safety Information
• When product has power button, the power button is one of the way to shut off the product; when there is no power
button, the only way to completely shut off power is to disconnect the product or the power adapter from the power
source.
• Don’t disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty.
If you need service, please contact us.
• Avoid water and wet locations.
• Adapter shall be installed near the equipment and shall be easily accessible.
• The plug considered as disconnect device of adapter.
• Use only power supplies which are provided by manufacturer and in the original packing of this product.
This product can be used in the following countries:
AT BG BY CA CZ DE DK EE
ES FI FR GB GR HU IE IT
LT LV MT NL NO PL PT RO
RU SE SG SK TR UA US