Table of Contents
TP-Link HS100 User Manual
Displayed below is the user manual for HS100 by TP-Link which is a product in the Smart Plugs category. This manual has pages.
User’s Manual
1910012261 REV 2.0.1
Wi-Fi Smart Plug HS100
Wi-Fi Smart Plug with Energy Monitoring HS110
Copyright & Trademarks
Specications are subject to change without notice. TP-Link is a registered trademark
of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or
registered trademarks of their respective holders.
No part of the specications may be reproduced in any form or by any means or used
to make any derivative such as translation, transformation, or adaptation without
permission from TP-Link Technologies Co., Ltd.
© 2017 TP-Link. All rights reserved.
www.tp-link.com
4www.tp-link.com
User’s Manual
Chapter 1. Introduction
1.1 Product Overview
What This Product Does
The Wi-Fi Smart Plugs make it easy to control your lights or household
electronic devices anywhere in the world with the TP-Link Kasa app on your
smartphones or tablets.
Schedule and Away Mode
With the Kasa’s Schedule and Away Mode, you can automate your lights or
plugged-in appliances to turn on and off according to specic schedules, to
simulate occupancy when you’re away from home. In addition, the countdown
timer enhances safety by automatically switching off the running household
appliances after a preset time.
Compatible with Amazon Echo
You can pair the Smart Plugs with Amazon Echo for voice control.
Compatible with Android, iOS
The free Kasa app lets you run them from any Android (5.0 and higher) or iOS
(iOS 8 and higher) smartphone.
Energy Conservation (for HS110 only)
You can efciently conserve energy and save money while using the Smart
Plugs to control your space heaters and fans. The Smart Plug tracks your
device’s power consumption in real-time, and has weekly and monthly
summaries.
1.2 Main Features
•Control devices connected to the Smart Plug wherever you have Internet
using the free Kasa app on yoursmartphone.
•Schedule the Smart Plug to automatically power electronics on and off as
needed, like setting lights to come on at dusk or turn off at sunrise.
5www.tp-link.com
User’s Manual
•Analyze your plugged-in device’s real-time and historical power
consumption. (for HS110 only)
•Turns your devices on and off at different times to give the appearance that
someone is home.
•Amazon Echo (sold separately) lets you control devices connected to the
Smart Plugs just using your voice.
1.3 Panel Layout
* Image may differ from actual product due to different regional power specications. Here we use
the U.S. version as an example.
Itemes Sta-
tus Description
(Settings
Button) /
Press this button for 5 seconds or until the
Wi-Fi LED blinks amber and green to
initiate the app-cong process.
Press and hold for 10 seconds or until the
Wi-Fi LED blinks amber rapidly to factory
reset.
Settings Button
Wi-Fi LED
Power LED
USB Port
6www.tp-link.com
User’s Manual
Itemes Sta-
tus Description
(Wi-Fi LED)
Blink
Amber and green: App conguring process.
Green: Connecting to the network.
Amber: Factory resetting.
On
Green: Network connection established.
Amber: Rebooting.
Red: No network connection.
(Power LED)
On
Off
The Smart Plug is switched on.
The Smart Plug is switched off.
USB Port
(HS110 Only) /
Charge your USB-powered electronic devic-
es.
Maximum output current: 1000mA (1A).
Supported Load Types:
Coffee Maker: 800 W
Desk Lamp: 235.2 W
LCD: 270 W
Heater: 1500 W
Humidier: 260 W
Iron: 1500 W
Toaster: 850 W
Tower Fan: 50 W
7www.tp-link.com
User’s Manual
Chapter 2. Quick Start
1. Download Kasa for Mobile from the App Store or Google Play.
OR
scan QR
code
2. Connect your mobile device to a 2.4GHz Wi-Fi network.
Note: The Smart Plug only supports 2.4GHz networks.
3. Launch Kasa and follow the app instructions to connect the
Smart Plug to your network.
8www.tp-link.com
User’s Manual
Troubleshooting
Frequently Asked Questions
1. What devices can I control with the Smart Plug?
You can control lights, electronics and small appliances such as
humidiers, air puriers, portable heaters and fans.
2. What should I do when I can’t control the connected device?
• Check that the connected device is switched to ON.
• Make sure your mobile device and the Smart Plug are on the same Wi-Fi
network.
• Enable Remote Control to control the connected device from outside
your home.
3. What should I do when the Wi-Fi LED is lit red?
A red LED light indicates no network connection.
• Check your network connectivity.
• Relocate the Smart Plug. Avoid placing the Smart Plug near potential
sources of radio signal interference.
• Repeat the app conguring process.
• Factory reset the Smart Plug and try to add it again.
4. How do I pair the Smart Plug with Amazon Echo?
Visit www.tp-link.com/en/faq-944.html or within the Kasa Help section for
pairing instructions.
Support
• Specications can be found on the product page at www.tp-link.com
• Our Technical Support and troubleshooting information can be found at
www.tp-link.com/support.
9www.tp-link.com
User’s Manual
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio / TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modications to this equipment. Such modications could void the user’s authority to operate the
equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile
Congurations. The antennas used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.”
CE Mark Warning
10www.tp-link.com
User’s Manual
This is a class B product. In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.
OPERATING FREQUENCY(the maximum transmitted power)
2412MHz—2472MHz(20dBm)
No restrictions exist in the use of radio frequencies or frequency bands in all EU member states
and EFTA countries.
EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU.
The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce.
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of
the general public to electromagnetic elds by way of health protection.
The device complies with RF specications when the device used at 20 cm from your body.
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSSs. Operation is subject to the
following two conditions:
1) This device may not cause interference, and
2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1) l’appareil ne doit pas produire de brouillage;
2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le
brouillage est susceptible d’en compromettre le fonctionnement.
Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
11www.tp-link.com
User’s Manual
Déclaration d’exposition aux radiations
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm
de distance entre la source de rayonnement et votre corps.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Korea Warning Statements
당해 무선설비는 운용중 전파혼신 가능성이 있음.
NCC Notice
BSMI Notice
12www.tp-link.com
User’s Manual
Pb
Cd
Hg
CrVI
PBB
PBDE
PCB
—
Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам
нормативних документів та вимогам, що передбачені чинними законодавчими актами
України.
Safety Information
• Keep the device away from water, re, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• For passthrough devices, plug the power strips into the integrated electrical sockets of the
devices, but devices of the same or another type not be stacked in normal use.
• The devices are not intended for use in locations where the temperature may be less than
actual room conditions, such as unheated warehouses or garages.
Please read and follow the above safety information when operating the device. We cannot
guarantee that no accidents or damage will occur due to improper use of the device. Please use
this product with care and operate at your own risk.
13www.tp-link.com
User’s Manual
Explanation of the symbols on the product label
Symbol Explanation
AC voltage
Indoor use only
RECYCLING
This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE). This means that this product must be
handled pursuant to European directive 2012/19/EU in order to be recycled
or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling
organization or to the retailer when he buys a new electrical or electronic
equipment.