Table of Contents
TP-Link KL50 User Manual
Displayed below is the user manual for KL50 by TP-Link which is a product in the Smart Lighting category. This manual has pages.
User Guide
Kasa Filament Smart Bulb
KL50 / KL60
1910012586 REV1.0.0
Contents
About This Guide ···················································· 1
Introduction ······························································· 2
Set Up Your Smart Bulb ······································· 3
Main Device Controls ·········································· 4
Congure Your Smart Bulb ································ 5
Create Scenes·························································· 7
Discover Kasa ··························································· 8
Authentication ·························································· 9
1
About This Guide
This guide provides a brief introduction to Smart Bulb and the Kasa app, as well as regulatory information.
Please note that features of Smart Bulb may vary slightly depending on the model and software version you have. All images, parameters and
descriptions documented in this guide are used for demonstration only.
Conventions
In this guide, the following convention is used:
Convention Description
Teal Key information appears in teal, including management page text such as menus, items, buttons and so on.
Underline Hyperlinks are in teal and underlined. You can click to redirect to a website.
Support
• Specications can be found on the product page at https://www.tp-link.com.
• Our Technical Support and troubleshooting information can be found at https://www.tp-link.com/support.
2
Introduction
The Smart Bulb is part of the Kasa smart home family of products, including plugs, switches, cameras and more. You can adjust brightness, track
energy consumption, set schedules and timers and set an alarm that wakes you naturally by simulating the sunrise. Group lights together to control
your smart bulbs more easily and create your own scenes.
You can also control multiple smart home devices with the Kasa app or use your voice for added convenience. With Kasa, your home is never more
than a few taps away.
• No Hub Required - The Smart Light screws in just like an ordinary bulb. Simply download the Kasa Smart app, connect to Wi-Fi and enjoy. No special
hardware is needed.
• Scheduling - Set your smart bulb to turn on or o while you are home or away.
• Energy Saving - Reduce power usage without compromising on light quality.
• Voice Control - Pair the smart bulb with Amazon Echo, Dot and Tap or Google Assistant for voice control.
• Remote Control - Set up the smart bulb easily and control from anywhere with the free Kasa app.
KL50 (Dimmable, Soft White) KL60 (Dimmable, Warm Amber)
A dimming range from 1%-100%, lighting for any
occasion
A dimming range from 1%-100%, lighting for any
occasion
3
Set Up Your Smart Bulb
Follow the steps below to set up your smart bulb via the Kasa Smart app.
Step 1. Download Kasa
Get the Kasa Smart app from the App Store or
Google Play.
Step 2. Log In
Open the app, and log in with your TP-Link ID.
If you don't have an account, create one rst.
Step 3. Add Device
Tap the button in the Kasa app and select
Smart Bulb KL50-130 Series/LB100 Series.
Follow app instructions to complete the setup.
4
Main Device Controls
After you successfully set up your Smart Bulb, you will see the Devices page of the Kasa app and the Smart Bulb page after tapping a Smart Bulb.
Devices Page
This page lists your smart bulbs, and other
smart home devices if any. You can instantly
turn on/o the bulb or change colors.
Smart Bulb Page
On the Devices page, tap a Smart Bulb, then
you can have more detailed configuration
options about your bulb.
*The image is for demonstration only.
ON
OFF
5
Congure Your Smart Bulb
On the Smart Bulb page, you can adjust the light temperature, set schedules, track energy consumption and change settings.
Presets and Recents
Tap to add presets and apply what you have
set recently to your smart bulb.
Create Event
Tap to set schedules for your smart bulb
to simplify your daily routine by creating
automatic On/O action.
6
Congure Your Smart Bulb
On the Smart Bulb page, you can adjust the light temperature, set schedules, track energy consumption and change settings.
Usage
Tap to view and track energy consumption.
Device Settings
Tap to view and change the settings of your
smart bulb. Moreover, you can enable remote
control for ease of use.
7
Create Scenes
A scene is a preset group of smart devices that can be programmed, customized and activated simultaneously at the touch of a button from your
smartphone or tablet, allowing you to easily set your mood, activity or t any special occasion. This page allows you to preset how your smart home
devices should act automatically at special occasions.
8
Discover Kasa
Use the Kasa app to pair your Smart Bulb with Amazon Alexa or Google Home Assistant and enjoy a full hands-free experience. Kasa helps manage
the rest of your smart home too, working with Nest to trigger changes when you arrive home or leave for the day. IFTTT support makes it easy to set
interactions between a whole host of products.
Launch the Kasa app and go to Add Device > WORKS WITH KASA > Amazon Alexa / Google Assistant / Nest Home and Away / IFTTT for detailed
instructions.
Authentication
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product
names are trademarks or registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or
adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2019 TP-Link Technologies Co., Ltd. All rights reserved.
FCC Compliance Information Statement
Product Name: Kasa Filament Smart Bulb
Model Number: KL50 / KL60
Component Name Model FCC ID
Kasa Light Wi-Fi Module KLM100 TE7KLM100
Responsible party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be
co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards,
FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2019-05-17
FCC Compliance Information Statement
Product Name: Kasa Light Wi-Fi Module
Model Number: KLM100
Responsible party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be
co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards,
FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2019-05-17
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take
adequate measures.
OPERATING FREQUENCY (the maximum transmitted power)
2412 MHz -2472 MHz (20dBm)
No restrictions exist in the use of radio frequencies or frequency bands in all EU member states and EFTA countries.
EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC and 2011/65/EU.
The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way
of health protection.
The device complies with RF specifications when the device used at 20 cm from your body.
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:
1 ) This device may not cause interference, and
2 ) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes :
1 ) l’appareil ne doit pas produire de brouillage;
2 ) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le
fonctionnement.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être
installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Korea Warning Statements
당해 무선설비는 운용중 전파혼신 가능성이 있음.
NCC Notice
BSMI Notice
Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам,
що передбачені чинними законодавчими актами України.
Safety Information
• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• Only use the control provided with or specified by these instructions to control this device.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to
improper use of the device. Please use this product with care and operate at your own risk.
WARNING:
• RISK OF ELECTRIC SHOCK OR BURNS. Switch OFF the light switch controlling the bulb and WAIT for the bulb to cool down before attempting to
change it.
• Do not install the Smart Bulb with wet hands or when standing on wet or damp surfaces.
• Compatible with regular light switches. Not suitable for use with standard in-wall dimmers. Not compatible with photosensors, motion sensors, or
timers. Dimmable via the app only.
• NOT for use in totally enclosed or recessed luminaires. Suitable for damp locations.
• NOT FOR EMERGENCY LIGHTING.
• The increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention.
• Operating Temperature: -15~40(5~104)
• Storage Temperature: -20~70(-4-158)
• Operating Humidity: 10%~90%RH, Non-condensing
• Storage Humidity: 10%~90%RH, Non-condensing
Explanation of the symbols on the product label
Symbol Explanation
Indoor use only
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to
European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.