TP-Link LB230 User Manual

Displayed below is the user manual for LB230 by TP-Link which is a product in the LED Bulbs category. This manual has pages.

User Guide

Smart Wi-Fi LED Bulb with Color-Changing Hue

1910012253 REV1.0.0

Contents

About This Guide ···················································· 1

Introduction ······························································· 2

Set Up Your Smart Bulb ······································· 3

Main Pages ································································ 4

Congure Your Smart Bulb ································ 5

Create Scenes·························································· 7

Authentication ·························································· 8

About This Guide

This guide provides a brief introduction to Smart Bulb and the Kasa app, as well as regulatory information.

Please note that features of Smart Bulb may vary slightly depending on the model and software version you have. All images, parameters and

descriptions documented in this guide are used for demonstration only.

Conventions

In this guide, the following convention is used:

Convention Description

Teal Key information appears in teal, including management page text such as menus, items, buttons and so on.

Underline Hyperlinks are in teal and underlined. You can click to redirect to a website.

Support

• Specications can be found on the product page at http://www.tp-link.com.

• Our Technical Support and troubleshooting information can be found at http://www.tp-link.com/support.

Introduction

The Smart Bulb is part of the Kasa smart home family of products, including plugs, switches, cameras and more. You can adjust brightness, track

energy consumption, set schedules and timers and set an alarm that wakes you naturally by simulating the sunrise. Group lights together to control

your smart bulbs more easily and create your own scenes.

You can also control multiple smart home devices with the Kasa app or use your voice for added convenience. With Kasa, your home is never more

than a few taps away.

• Colors for Every Occasion - Switch between a whole palette of colors to suit your mood and adjust brightness and light appearance from soft

whites to bright daylight.

• No Hub Required - The Smart Bulb screws in just like an ordinary bulb. Simply download the Kasa for Mobile app, connect to Wi-Fi and enjoy. No

special hardware is needed.

• Energy Saving - Reduce power usage without compromising on light quality. The Smart Bulb produces 1000 lumens while only using 13W.

• Voice Control - Pair the smart bulbs with Amazon Echo, Dot and Tap or Google Assistant for voice control.

• Remote Access - Set up the smart bulbs easily and control from anywhere with the free Kasa app.

Set Up Your Smart Bulb

Follow the steps below to set up your Smart Bulb via the Kasa for Mobile app.

Step 1. Download Kasa

Get the Kasa for Mobile app from the App

Store or Google Play.

Step 2. Connect to Network

Connect your mobile device to a 2.4GHz Wi-Fi

network.

Step 3. Add Device

Tap the button in the Kasa app and select

SMART BULB LB200 Series. Follow app

instructions to complete the setup.

Main Pages

After you successfully set up your Smart Bulb, you will see the home page of the Kasa app and the Smart Bulb page after tapping a Smart Bulb.

Devices Page

This page lists your Smart Bulbs, and other

smart home devices if any. You can instantly

turn on/o the bulb or change colors.

Smart Bulb Page

On the Devices page, tap a Smart Bulb, then

you can have more detailed configuration

options about your bulb.

Congure Your Smart Bulb

On the Smart Bulb page, you can adjust the light temperature and color, set schedules, track energy consumption and change settings.

Presets and Recents

Tap to add presets and apply what you have

set recently to your smart bulb.

Create Event

Tap to set schedules for your bulb.

Congure Your Smart Bulb

On the Smart Bulb page, you can adjust the light temperature and color, set schedules, track energy consumption and change settings.

Usage

Tap to view and track energy consumption.

Device Settings

Tap to view and change its settings.

Create Scenes

A scene is a preset group of smart devices that can be programmed, customized and activated simultaneously at the touch of a button from your

smartphone or tablet, allowing you to easily set your mood, activity or t any special occasion. This page allows you to preset how your smart home

devices should act automatically at special occasions.

Authentication

Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product

names are trademarks or registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the

equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications

could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be

co-located or operating in conjunction with any other antenna or transmitter.

“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this

transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction

with any other antenna or transmitter.”

Canadian Compliance Statement

This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux

deux conditions suivantes :

1. l’appareil ne doit pas produire de brouillage;

2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement

Radiation Exposure Statement

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated

with minimum distance 20cm between the radiator & your body.

Déclaration d’exposition aux radiations

Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être

installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Korea Warning Statements

당해 무선설비는 운용중 전파혼신 가능성이 있음.

Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що

передбачені чинними законодавчими актами України.

Safety Information

• Keep the device away from water, fire, humidity or hot environments.

• Do not attempt to disassemble, repair, or modify the device.

• Do not use damaged charger or USB cable to charge the device.

• Do not use any other chargers than those recommended.

• Do not use the device where wireless devices are not allowed.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to

improper use of the device. Please use this product with care and operate at your own risk.

Table of Contents

TP-Link LB230 User Manual