TP-Link OC200 User Manual
Displayed below is the user manual for OC200 by TP-Link which is a product in the Gateways/Controllers category. This manual has pages.
Typical Network Topology
EAP245EAP225
EAP225-Outdoor
Management Device
Router
SwitchOC200
A DHCP server (typically a router) with DHCP function enabled
is required to assign IP addresses to the EAPs and OC200 in
your local network.
Thank you for purchasing OC200, the Omada Cloud Controller.
This Installation Guide is designed to guide you through
installation.
Cloud LED
On: The device is bound to a TP-Link ID.
Slow Flashing: The device is connected to cloud but not
bound to a TP-Link ID.
Quick Flashing: The device is being reset to its factory default
settings.
O: The device is disconnected from cloud.
Power LED
On: Working normally.
O: Working abnormally.
ETH1 (PoE IN) Port
Connected to a standard 802.3af or 802.3at PoE device, such
as a TP-Link PoE switch, to transmit data and gain power
supply simultaneously.
Kensington Security Slot
Secure the lock (not provided) into the security slot to prevent
the device from being stolen.
Micro USB
Connected to a USB Power Source (5V DC, minimum 1A) to
gain power supply if PoE is not available.
ETH2 Port
Connected to a device to transmit data.
USB 2.0 Port
Connected to a storage device to automatically back up the
conguration le and database. This function is only available
when OC200 is powered by a PoE device.
Reset Button
After the device is initialized, press and hold the button for 5
seconds to reset the device to its factory default settings.
OC200
Installation Guide
Omada Cloud Controller
Front Panel
Rear Panel
Hardware Overview Power On
Via Standard PoE Device
Via USB Power Source
Connect an Ethernet cable from the ETH1 (PoE IN) port of
OC200 to a standard 802.3af or 802.3at PoE device, such as
TP-Link PoE switch.
Connect a USB cable (not provided) from the micro USB port
of OC200 to the USB Power Source (5V DC, minimum 1A).
The Cloud LED ashes three times when initialization is
completed.
Package Contents
Installation Guide
OC200
Installation Guide
Omada Cloud Controller
Feet
OC200
Ethernet Cable
ETH1 (PoE IN) ETH2 USB 2.0 Port Reset
Cloud LED
Power LED
Micro USB
Kensington Security Slot
7106508054 REV1.0.0
Software Congurations
OC200 supports two management options:
To configure and manage OC200 without requiring internet access, please refer to Local Management.
To configure and manage OC200 through cloud services, please refer to Remote Management.
1. Download the Omada app on your mobile device. It can be
downloaded from Apple Store or Google Play:
3. Launch a web browser and type OC200’s IP address in the
address bar, then press Enter (Windows) or Return (Mac).
4. Click Let’s Get Started and follow the step-by-step
instructions to complete the conguration wizard.
1. Make sure that your management device and OC200 are on
the same subnet.
2. Check the DHCP server (typically a router) for OC200’s IP
Address. The default fallback IP address is 192.168.0.253.
For detailed congurations, please visit
https://www.tp-link.com/support to download the User
Guide of OC200 in the download center.
2. Make sure that your mobile device and OC200 are on the
same subnet.
3. Launch the app and go to Local Access. Then tap the +
button on the upper-right corner to add OC200.
4. Follow the step-by-step instructions to complete the
conguration wizard.
Remote Management
1. Make sure that your mobile device and OC200 can access
the internet.
2. Download the Omada app on your mobile device. It can be
downloaded from Apple Store or Google Play:
1. Make sure that your management device and OC200 can
access the internet.
2. Launch a web browser and type https://omada.tplinkcloud.com
in the address bar, then press Enter (Windows) or Return (Mac).
3. Enter your TP-Link ID and password to log in. Then click Add
Cloud Controller and follow the instructions to add your OC200.
4. Click Launch in the Action column to visit the web
management interface of OC200.
5. Click Let’s Get Started and follow the step-by-step
instructions to complete the conguration wizard.
3. Launch the app and go to Cloud Access. Then log in with
your TP-Link ID.
4. Tap the + button on the upper-right corner and follow the
instructions in the app to add OC200.
5. Follow the step-by-step instructions to complete the
conguration wizard.
The products of TP-Link partly contain software code developed by third parties,
including software code subject to the GNU General Public License (“GPL”). As
applicable, the terms of the GPL and any information on obtaining access to the
respective GPL Code used in TP-Link products are available to you in GPL-Code-Centre
under (https://www.tp-link.com/en/support/gpl/). The respective programs are
distributed WITHOUT ANY WARRANTY and are subject to the copyrights of one or more
authors. For details, see the GPL Code and other terms of the GPL.
For technical support, User Guide and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code.
Local Management
Via Omada App Via a Web Browser
Via Omada App
https://omada.tplinkcloud.com
https://<IP_address>
Via a Web Browser
© 2018 TP-Link
Scan for Omada App Download Omada App
or
Scan for Omada App Download Omada App
or
If you have downloaded the Omada app, you can also
check the app for OC200’s IP address.
The fallback IP address is used when OC200 fails to get
dynamic IP address from the DHCP server.